2014 Profile Catalog

“American Made, American Owned”

TM

1

Table of Contents

General Information 2

Base Boards 3

Casings 13

Chair Rail, Backer 23

Crown Moulding 24

Crown Enhancers 39

Panel Mouldings, Miscellaneous Items 39

Boards, Shelving, Window Stool 40

Jamb Stock 41

Installation and Finishing 42

1554 Springhead Church Road • Willacoochee, Georgia 31650(912) 534-6363 • Fax (912) 534-5010 • (866) 653-4852

www.tlcmouldings.com

2

This catalog contains the majority of available profiles manufactured at time of catalog printing. If you are unable to locate a profile in this catalog, check with TLC Mouldings, (866) 653-4852, www.tlcmouldings.com or your distributor. New profiles are added to the library on a regular basis.

Please keep the following items in mind:

• Custom profiles are available, based upon volume.

• Special orders are not subject to cancellation.

• Some profiles may require minimum runs.

• Standard length is 16’.

• While other lengths are available, a longer lead-time and/or surcharge may apply.

• Samples are available upon request – pending availability.

• Shipments may be +/- 10% of ordered quantity.

• All orders subject to mill approval.

• All Harmony Mouldings are Made in the USA.

• ECO - Certifed composite for finished product (ECC-FP, CPA 4-11) contains 100% recycled and/or recovered fibers meeting CARB Phase 2 toxic control measures. CARB approved third party certifier TPC-1.

3

Base

0015/8” x 2-1/2” 528/u

001

5/8” x 2-1/2”

002 3/4” x 6-11/16” 168/u

3/4” x 8-11/16” 120/u

11/16” x 5-1/4” 224/u

11/16” x 7-1/4” 168/u

11/16” x 9-1/4” 140/u

002

3/4” x 6-11/16

”

0077/16” x 3-1/4” 576/u

(6 unit min.)

007

7/16” x 3-1/4”

0101/2” x 7-1/4” 240/u

1/2” x 5-1/4” 336/u

010

1/2” x 7-1/4”

0117/16” x 3-1/4” 650/u

7/16” x 3” 700/u

(6 unit min.)

011

7/16” x 3-1/

4”

0189/16” x 5-1/4” 288/u

018

9/16” x 5-1/4”

4

0193/4” x 6-1/2” 120/u

019

3/4” x 6-1/2

”

0231/2” x 3-1/4” 546/u

1/2” x 4-1/4” 420/u

1/2” x 5-1/4” 336/u

Also 9/16”

023

1/2” x 3-1/4

”

02012mm x 4-1/4” 420/u

12mm x 3-1/4” 546/u

12mm x 5-1/4” 336/u

0259/16” x 5-1/4” 288/u

025

9/16” x 5-1/

4”

0279/16” x 5-1/4” 288/u

9/16” x 7-1/4” 192/u

9/16” x 9-1/4” 160/u

11/16” x 9-1/4” 140/u

(Also 12mm and 15mm)

027

9/16” x 5-1/4”

Base

0289/16” x 5-1/4” 288/u

9/16” x 7-1/4” 192/u

289/16” x 7-1/4”

5

Base

03112mm x 3-1/4” 546/u

031

12mm x 3-1/4”

03615mm x 5-1/4” 288/u

15mm x 7-1/4” 192/u

9/16” x 5-1/4” 288/u

9/16” x 7-1/4” 192/u

1/2” x 5-1/4” 336/u

1/2” x 7-1/4 240/u

03712mm x 4-1/4” 324/u

12mm x 5-1/4” 336/u

03815mm x 7-3/8” 192/u

04015mm x 3-7/8” 396/u

(6 unit min.)

0301/2” x 3-1/4” 546/u

1/2” x 5-1/4” 336/u

(6 unit min.)

030

1/2” x 3-1/4”

6

Base

04115mm x 4-1/4” 320/u

0421/2” x 5-3/16” 336/u

(6 unit min.)

04415mm x 3-1/4” 420/u

0479/16” x 3-1/4” 480/u

(6 unit min.)

047

9/16” x 3-1/4”

0525/8” x 5-1/4” 240/u

04818mm x 7” 144/u

7

Base

0625/8” x 6-1/2” 192/u

062

5/8” x 6-1/2

0531/2” x 3-1/4” 546/u

1/2” x 4-1/4” 420/u

Also 9/16”

053

1/2” x 3-1/4

”

06015mm x 5” 256/u

8

Base

092 9/16" x 7-3/8”

066 9/16” x 3-1/4”

0631/2” x 3-1/4” 546/u

063 1/2” x 3-1/4”

0661/2” x 3-1/4” 702/u

07515mm x 5-1/4” 288/u

15mm x 5” 288/u

0785/8” x 5” 288/u

0865/8” x 3-1/4” 252/u5/8” x 4-1/4” 324/u5/8” x 5-1/4” 256/u5/8” x 7-1/4” 192/u3/4” x 9-1/4” 140/u

086 5/8” x 5-1/4” 092 9/16” x 8” 200/u

9/16” x 7-1/4” 192/u

0959/16” x 6-1/2” 280/u

(6 unit min.)

0961/2” x 5-1/4” 336/u

(6 unit min.)

0983/4” x 3-1/2” 390/u

112 9/16” x 5-1/4”

111 9/16" x 4-1/2"

9

Base09912mm x 3-1/4” 576/u

1001/2” x 3-1/4” 546/u

1/2” x 4-1/4” 480/u

1/2” x 5-1/4” 336/u

1/2” x 7-1/4” 240/u

1/2” x 9-1/4” 180/u

100 1/2” x 5-1/4” 10311/16” x 4-5/8” 270/u

1055/8” x 5-1/4” 240/u

5/8” x 7-1/4” 192/u

1087/16” x 3” 672/u

(6 unit min.)

1119/16” x 4-1/2” 324/u

(6 unit min.)

1129/16” x 5-1/4” 288/u

9/16” x 7-1/4” 192/u

11312mm x 3-1/4” 546/u

113 12mm x 3-1/4"11412mm x 3-1/4” 546/u

(6 unit min.)

10415mm x 7-1/4” 192/u

15mm x 5-1/4” 288/u

10

Base11815mm x 7-1/4” 192/u

1219/16” x 3-1/4” 468/u

(6 unit minimum)

121 9/16” x 3-1/4”1229/16” x 4-7/16” 324/u

(6 unit min.)10415mm x 7-1/4” 192/u

15mm x 5-1/4” 288/u 1255/8” x 5-1/4” 288/u

5/8” x 7-1/4” 192/u

5/8” x 9-1/4”160/u

125 5/8" x 5-1/4"

12712mm x 4-1/4” 420/u

12mm x5-1/4” 336/u

1313/8” x 3-1/8” 650/u

(6 unit min.)

1329/16” x 3-1/4” 546/u

(6 unit min.)

13412mm x 3-1/4” 546/u

(6 unit min.)

1355/8” x 5-3/8” 240/u

(6 unit min.)

1405/8” x 4-1/2” 324/u

5/8” x 7-1/4” 192/u

16815mm x 5-1/4” 256/u

15mm x 4-1/4” 360/u

15mm x 7-1/4” 192/u

15mm x 3-1/4” 420/u

11

Base14212mm x 3” 588/u

(6 unit min.)

1575/8” x 5-1/4” 288/u

15313/16” x 8-1/2” 140/u

(6 unit min.)(Shown smaller

than actual size)

15918mm x 5-1/4” 220/u

1639/16” x 5-1/4” 288/u

9/16” x 7-1/4” 192/u

9/16” x 9-1/4” 160/u

11/16” x 11-1/4” 96/u

163 9/16” x 5-1/4”

166 9/16” x 5-1/4”

1669/16” x 5-1/4” 288/u

1731-3/16” x 7-1/4” 120/u(Shown smaller than actual size)

1443/4” x 3-1/2” 390/u

12

Base

17511/16” x 5-1/2” 240/u

1809/16” x 5-1/4” 288/u

180 9/16” x 5-1/4” 1833/8” x 3-7/8” 528/u

(6 unit min.)

1845/8” x 5-9/16” 288/u

(6 unit min.)

1853/4” x 5-1/2” 192/u

(6 unit min.)

1875/8” x 5-1/2” 280/u

(6 unit min.)

1935/8” x 5-1/4” 240/u

19618mm x 7” 192/u

(6 unit min.)(Shown smaller

than actual size)

2005/8” x 5-1/4” 240/u

11/16” x 7-1/4”168/u

200 9/16” x 5-1/4” 3857/16” x 5-1/4” 336/u (Specify width and thickness)

(Minimum runs may apply)

13

Casing

298 15mm x 2” 756/u (6 unit min.) 236 9/16” x 2-1/4” 684/u

296 15mm x 2-1/4” 684/u

259 15mm x 2-1/4” 684/u

276 15mm x 2-1/4” 684/u (6 unit min.)

293 11/16” x 2-1/4” 756/u

(6 unit min.)

295 15mm x 2-1/4” 798/u 306 15mm x 2-1/4” 684/u

365 5/8” x 2-1/4” 684/u384 11/16” x 2-1/4” 532/u(Specify width and thickness)

(Minimum runs may apply)

204 5/8” x 2-1/4” 684/u (6 unit min.)204 5/8” x 2-1/4”

227 1/2” x 2-1/4” 684/u (6 unit min.)

242 5/8” x 2-1/4” 684/u

248 11/16” x 2-1/4” 510/u (6 unit min.)

248 11-16" x 2-1/4"

324 15mm x 2-1/4”684/u

356 9/16” x 2-1/4”356 9/16” x 2-1/4” 684/u

Also 5/8” 684/u and 11/16” 532/u

376 15mm x 2-1/4” 684/u

5/8” x 2-1/4” 684/u376 9/16” x 2-1/4”

366 5/8” x 2-1/4” 570/u

Also 9/16” 684/u366 5/8” x 2-1/4”

283 15mm x 2-1/8” 720/u

327 15mm x 2-1/4” 456/u

237 9/16” x 2-1/4” 684/u

14

Casing

284 3/4” x 2-7/16” 576/u (6 unit min.)

232 5/8” x 2-1/2” 680/u (6 unit min.)

255 5/8” x 2-1/2” 612/u (6 unit min.)

255 5/8" x 2-1/2"

261 5/8” x 2-1/2” 672/u (6 unit min.)

11/16” x 2-1/2” 612/u (6 unit min.)

322 5/8” x 2-1/2” 680/u (6 unit min.)268 15mm x 2-1/2” 672/u

256 15mm x 2-1/4” 570/u

286 15mm x 2-1/2” 612/u

299 15mm x 2-3/4” 504/u 337 18mm x 2-3/4” 364/u

292 5/8” x 2-3/4” 540/u (6 unit min.)292 5/8” x 2-3/4” 375 3/4” x 2-3/4” 390/u375 3/4” x 2-3/4”

287 5/8” x 2-3/4” 672/u (6 unit min.)

15

Casing

285 7/8” x 3” 384/u

313 18mm x 3” 504/u (6 unit minimum)

386 18mm x 3” 560/u (6 unit min.)

309 7/8” x 3” 392/u

241 1” x 3-1/8” 312/u

208 5/8” x 3-1/4” 432/u208 5/8” x 3-1/4”

260 1-1/8” x 3-3/16” 320/u (6 unit min.)260 1-1/8” x 3-3/16”

262 3/4” x 3-1/8” 396/u (6 unit min.)

344 9/16” x 3-1/4” 546/u

15mm x 3-1/2” 504/u344 9/16” x 3-1/4” 361 5/8” x 3-1/4” 546/u

361 5/8” x 3-1/4”

308 11/16” x 2-3/4” 540/u

380 15mm x 3-3/16” 468/u (6 unit min.)

16

Casing

218 18mm x 3-1/4” 364/u

320 9/16” x 3-1/4” 468/u (6 unit min.)320 9/16” x 3-1/4”

325 3/4” x 3-1/4” 390/u325 3/4” x 3-1/4”

297 11/16” x 3-1/4” 390/u (6 unit min.)

321 9/16” x 3-1/4” 468/u (6 unit min.)

379 15mm x 3-1/4” 468/u

399 3/4” x 3-1/4” 468/u

389 15mm x 3-1/4” 468/u

354 5/8” x 3-1/4” 546/u

319 9/16” x 3-1/4” 546/u (6 unit min.)

345 9/16” x 3-1/4” 468/u

Also 5/8” 468/u

and 11/16” 468/u

345 9/16” x 3-1/4” 271 11/16” x 3-1/4” 468/u (6 unit min.)

249 15mm x 3-1/4” 468/u

18mm x 3-1/4” 546/u346 15mm x 3-1/4” 546/u (6 unit min.)

17

Casing

216 1” x 3-1/2” 240/u (6 unit min.)

233 1” x 3-1/2” 360/u235 18mm x 3-1/2” 336/u

238 7/8” x 3-1/2” 288/u250 3/4” x 3-1/2” 360/u

231 11/16” x 3-3/8” 390/u

247 9/16” x 3-3/8” 468/u (6 unit minimum)

247 9-16" x 3-3/8"

341 9/16” x 3-3/8” 468/u

5/8” also available 390/u341 9/16” x 3-3/8”

402 18mm x 3-1/4” 384/u 274 11/16” x 3-1/4” 468/u

348 1” x 3-1/2” 360/u373 18mm x 3-1/2” 308/u

383 18mm x 3-1/2” 432/u

18

Casing

352 9/16” x 3-1/2” 432/u (6 unit min.) 360 1” x 3-1/2” 360/u

360 1" x 3-1/2"

370 1” x 3-1/2” 360/u370 1” x 3-1/2”

269 1” x 3-1/2” 280/u (6 unit min.)

307 18mm x 3-1/2” 280/u (6 unit min.)

332 1-1/16” x 3-1/2” 288/u

387 15mm x 3-1/2” 432/u (6 unit min.) 390 1” x 3-1/2” 360/u

364 1” x 3-1/2” 360/u (6 unit min.)

323 3/4” x 3-1/2” 432/u (6 unit min.)

243 18mm x 3-1/2” 432/u (6 unit min.)

395 11/16” x 3-1/2” 432/u

19

Casing

278 11/16” x 3-1/2” 432/u

280 13/16” x 3-1/2” 468/u (6 unit min.)

282 18mm x 3-1/2” 240/u

289 7/8” x 3-1/2” 360/u (6 unit min.)203 1” x 3-1/2” 360/u

205 3/4” x 3-1/2” 360/u

211 11/16” x 3-1/2” 360/u

215 11/16” x 3-1/2” 360/u (6 unit min.)

303 1” x 3-1/2” 360/u 336 3/4” x 3-1/2” 360/u (6 unit min.)

273 11/16” x 3-1/2” 462/u

267 1” x 3-1/2” 336/u

20

Casing

221 12mm x 3-9/16” 504/u

391 3/4” x 3-11/16” 462/u

214 11/16” x 4” 270/u (6 unit min.)

214 11/16” x 4”

224 1” x 4” 200/u

291 1” x 3-1/2” 264/u

312 18mm x 3-1/2” 360/u (6 unit min.)

329 11/16” x 3-1/2” 432/u

388 18mm x 3-1/2” 336/u

487 1” x 3-1/2” 308/u (6 unit min.)

213 1” x 4” 224/u

213 1" x 4"

270 1” x 3-11/16” 352/u (6 unit min.)

21

377 18mm x 4-1/4” 280/u

Casing

304 1-1/4” x 4-1/16” 200/u

225 1” x 4-1/4” 200/u (6 unit min.)

310 1-3/16” x 4-1/4” 216/u

301 1” x 4-3/16” 240/u

234 1-3/16” x 4” 200/u

367 1” x 4” 216/u (6 unit min.)

22

328 1-1/8” x 4-3/8” 216/u (6 unit min.)

Casing

353 1” x 4-1/2” 240/u

393 1-3/16” x 4-1/2” 180/u (6 unit min.)

351 1-1/4” x 5” 192/u

340 11/16” x 5-1/4” 224/u340 11/16” x 5-1/4”

314 11/16” x 7-1/4” 168/u

314 11/16” x 7-1/4”

240 1” x 4-1/2” 252/u

23

Chair Rail & Backer

401 7/16” x 5-1/4” 192/u

7/16” x 4-1/4” 480/u401 7/16" x 5-1/4"

403 1” x 3” 220/u

407 18mm x 3” 352/u

430 1” x 3-1/4” 208/u

432 3/4” x 3” 420/u (6 unit min.)

485 18mm” x 3-1/4” 468/u (6 unit min.)

490 11/16” x 2-5/8”490 11/16 x 2-5/8” 512/u

494 1” x 3-1/2” 288/u494 1” x 3-1/2”

496 15mm x 2-1/2” 704/u(6 unit min.)

497 5/8” x 4-1/2” 324/u (6 unit min.)

497 5/8" x 4-1/2"

649 9/16” x 3-5/8” 396/u

24

Crown

624 5/8” x 3-5/16” 360/u (6 unit min.)

552 9/16” x 2-3/4” 630/u (6 unit min.) 570 9/16” x 2-3/4” 450/u (6 unit min.)

551 9/16” x 3-1/4” 468/u551 9/16” x 3-1/4”

595 1/2” x 3-19/32” 504/u

520 5/8” x 4” 360/u

5205/8" x 4"

519 11/16” x 4-1/4” 360/u

519 11/16" x 4-1/4"

515 5/8” x 4-1/4” 360/u

515 5/8” x 4-1/4”

548 9/16” x 4-1/4” 360/u548 9/16” x 4-1/4”

549 9/16” x 3-5/8” 396/u549 9/16” x 3-5/8”

694 9/16” x 3-5/8” 396/u

674 9/16” x 4-5/8” 324/u

647 9/16” x 4-5/8” 324/u

25

550 11/16” x 4-1/4” 360/u

Crown

531 7/8” x 4-5/16” 240/u

573 1” x 4-1/4” 180/u

576 3/4” x 4-1/4” 270/u

578 15mm x 4-1/4” 360/u

26

Crown

558 15mm x 4-1/2” 288/u (6 unit min.)

564 18mm x 4-5/8” 270/u (6 unit min.)

687 5/8” x 4-7/16” 280/u (6 unit min.)

574 7/8” x 4-7/16” 216/u (6 unit min.)

609 5/8” x 4-1/2” 270/u (6 unit min.)

663 11/16” x 4-1/2” 270/u (6 unit min.)

644 5/8” x 4-15/32” 270/u (6 unit min.)

27

Crown

547 9/16” x 4-5/8” 324/u547 9/16” x 4-5/8”

685 18mm” x 4-5/8” 324/u

604 3/4” x 4-5/8” 252/u604 11/16” x 4-5/8”

581 11/16” x 5” 240/u (6 unit min.)

563 7/8” x 4-7/8” 192/u (6 unit min.)

506 5/8” x 5” 288/u506 5/8” x 5”

525 3/4” x 5” 240/u

525 3/4" x 5"

28

Crown

575 3/4” x 5” 252/u

575 3/4" x 5-1/8"

507 15mm x 5-1/4” 288/u

559 3/4” x 5-1/4” 240/u

583 3/4” x 5-1/4” 224/u (6 unit min.)

610 18mm x 5-1/4” 240/u (6 unit min.)

642 11/16” x 5-1/4” 288/u

654 9/16” x 5-1/4” 288/u

29

Crown

503 11/16” x 5-1/4” 256/u503 11/16” x 5-1/4”

524 3/4” x 5-1/4” 240/u

5243/4" x 5-1/4"

545 9/16” x 5-1/4” 288/u545 9/16” x 5-1/4”

686 9/16” x 5-1/4” 294/u

688 9/16” x 5-1/4” 288/u

605 11/16” x 5-1/4” 224/u

636 3/4” x 5-1/4” 240/u

30

Crown

655 3/4” x 5-1/4” 240/u

653 3/4” x 5-1/4” 240/u

501 3/4” x 5-1/2” 256/u501 3/4” x 5-1/2”

533 3/4” x 5-1/4” 256/u

553 5/8” x 5-1/2” 288/u (6 unit min.)

612 3/4” x 5-1/2” 210/u

6123/4" x 5-1/2"

630 11/16” x 5-1/2” 210/u

31

Crown

606 3/4” x 6” 252/u

571 13/16” x 5-5/8” 168/u

555 18mm x 5-5/8” 240/u

561 1” x 6” 144/u 5611” x 6”

641 1” x 6” 144/u

656 3/4” x 6” 144/u

616 18mm x 6-1/4” 192/u

32

Crown

500 1” x 6-5/16” 140/u500 1-1/8” x 6-5/16”

523 3/4” x 6-1/4” 224/u

523 3/4" x 6-1/4"

665 3/4” x 6-1/4” 224/u

602 1” x 6-3/8” 168/u

6021" x 6"

579 7/8” x 6-1/4” 144/u

582 3/4” x 6-1/2” 192/u (6 unit min.)

33

Crown

502 3/4” x 6-5/8” 168/u 5023/4” x 6-5/8”

560 11/16” x 6-15/16” 168/u

643 1” x 6-15/16” 144/u

691 9/16” x 6-1/2” 216/u

670 3/4” x 6-3/4” 168/u

569 3/4” x 6-7/8” 144/u (6 unit min.)

650 18mm x 6-7/8” 192/u

34

Crown

504 11/16” x 7” 168/u504 11/16” x 7”

505 1” x 7” 144/u

556 3/4” x 7” 168/u

541 11/16” x 7” 192/u

54111/16" x 7"

543 18mm” x 7” 168/u (6 unit min.)

627 3/4” x 7-1/4” 192/u

35

Crown

508 9/16” x 7-1/4” 210/u 5089/16” x 7-1/4”

537 3/4” x 7-1/4” 180/u (6 unit min.)

542 1” x 7-1/4” 144/u

577 3/4” x 7-1/4” 168/u

577 3/4” x 7-1/4”

572 1” x 7-1/4” 120/u

566 18mm x 7-1/4” 168/u

36

601 3/4” x 7-1/4” 180/u

603 1” x 7-1/4” 168/u

Crown

608 1” x 7-1/4” 168/u

608 1" x 7-1/4"

675 3/4” x 7-1/4” 168/u

6753/4" x 7-1/4"

562 1-1/8” x 7-1/4” 144/u562 1-1/4” x 7-1/4”

678 7/8” x 7-1/4” 120/u

37

679 1” x 7-1/4” 120/u

Crown

536 11/16” x 7-1/2” 192/u

518 11/16” x 7-3/4” 120/u (Shown smaller than actual size)518 11/16” x 7-3/4”

677 3/4” x 7-3/4” 160/u (Shown smaller than actual size)

513 1-1/8” x 8” 90/u (Shown smaller than actual size)513 1-1/8” x 8”

638 1-3/16” x 7-3/8” 120/u

38

668 15/16” x 8-1/4” 120/u (Shown smaller than actual size)

Crown

528 3/4” x 8” 140/u (Shown smaller than actual size)

5283/4" x 8"

625 1” x 8” 120/u (Shown smaller than actual size)

618 3/4” x 8-1/4” 140/u (6 unit min.) (Shown smaller than actual size)

521 1-1/4” x 8-1/2” 50/u (Shown smaller than actual size)

521 1-1/4" x 8-1/2"

697 1-1/4” x 8*1/2” 100/u (6 unit min.) (Shown smaller than actual size)

964 1-3/16” x 5-1/4” 168/u (6 unit min.)

39

Crown Enhancers

599 5/8” x 4-1/2” 288/u

599 5/8” x 4-1/2”

Panel Moulding & Miscellaneous Items

930 3/8” x 5-3/4” 336/u

(6 unit min.)

903 1-1/4” x 2-1/4” 300/u903 1-1/4” x 2-1/4”

914 5/8” x 2-7/16” 448/u914 5/8” x 2-7/16”

933 11/16” x 1-3/4” 360/u 936 11/16” x 1-3/8” 768/u

908 3/4” x 1-11/16” 528/u

942 15mm x 3-1/4” 468/u948 5/8” x 1-1/2” 1008/u

40

Panel Moulding & Miscellaneous Items

916 1/2” x 5-1/4” 384/u

918 3/4” x 5-1/2” 192/u

881 1/2” x 4-3/4” 378/u 5/8” x 2-3/4” 480/u

(6 unit min.)

931 1-1/16” x 5-5/16” 160/u

(6 unit min.)

Board/Shelving/Window Stool

921 11/16” x 5-1/4” 224/u 11/16” x 7-1/4” 168/u 5/8” x 4-1/2” 270/u 5/8” x 5-1/4” 240/u 5/8” x 6-1/4” 210/u 5/8” x 7-1/4” 180/u

922 11/16” x 7-1/4” 168/u

5/8” x 7-1/4” 180/u

(6 unit min.)

41

Board/Shelving/Window Stool

3/4” & 11/16” S4S Available

(Other widths available)

Raw Primed 1-1/2” 1-1/2” 3-1/2” 3-1/2” 5-1/2” 5-1/2” 7-1/4” 7-1/4” 9-1/4” 9-1/4” 11-1/4” 11-1/4” 12” 15-1/4” 17-1/4” 23-1/4”

3/4” & 11/16” E2E Primed Available

with Minimum Runs

2”3-1/2”4-1/2”5-1/2”7-1/4”

Bullnose shelving also available. Consult the mill on your specifications.

Jamb Stock

703 11/16” x 4-9/16”703 11/16” x 4-9/16”

701 5/8” x 4-3/4”

Specify width and length

701 5/8” x 4-3/4”

700 11/16” x 4-9/16”700 11/16” x 4-9/16”

900 15mm x 5-1/4” 288/u

42

Installation & Finishing

Harmony Mouldings installation is similar to wood mouldings. For optimum installation results:

• Material should be stored inside the home or job site.

• Mouldings should be stored in a dry secure area, not resting on concrete.

• Prior to installation, Harmony Mouldings should be stored in room conditions for a minimum of 48 hours.

• When installing baseboards on new slab construction, it is recommended that baseboard be installed at least 1/8” ABOVE the concrete to help prevent moisture wicking. Also, insure that all components of the wall system are dry.

• In high moisture areas, it is recommended you prime ends and back of moulding before installation.

• Use a 60 to 80-tooth carbide tipped saw blade for cutting. Note: MDF may expand and contract up to .3% due to changes in relative humidity.

• For best results, use a pneumatic fastening system with finish nails or 18 gauge brad nails. “T” Nails and staples are not recommended, as they tend to cause puckering.

• If hand nailing, it is recommended to pre-drill.

• Air pressure on pneumatic nailers should be between 90 and 120 psi, depending on moulding type.

• Nailing should be 1” in from ends, and 1/4” from edges.

• If using screws, predrilled pilot holes are recommended. Pilot holes should be 85-90% of screw root diameter and depth should be slightly more than the screws length. Sheetrock screws or specially designed MDF screws work best.

• At a splice, use a 30 degree scarf joint where you can nail both sides into a stud or top/bottom plate, and glue edges with carpenters glue.

Prior to painting, nail holes should be filled with light weight spackle. Putty may also be used. but make sure it is compatible with finish paint. After spackle dries, sand lightly, being careful not to sand through the primer coat.

Harmony Mouldings are coated with a high quality water based acrylic latex primer at the mill. Any quality water, oil, or lacquer based top coating will work to produce a good finished product. For best results, it is recommended that you follow paint manufacturer’s instructions regarding product use.

Not responsible for installation problems or product failure due to non conforming installation practices.

1554 Springhead Church Road • Willacoochee, Georgia 31650(912) 534-6363 • Fax (912) 534-5010 • (866) 653-4852

www.tlcmouldings.com

An Affiliate of the Langdale Companywww.thelangdalecompany.com

Made in the U.S.A. with locally sourced fiber and labor