2013–2014 membership directory - c.ymcdn.comc.ymcdn.com/sites/ · pdf filemembership...
TRANSCRIPT
2013–2014
MEMBERSHIPDIRECTORYAND RESOURCE GUIDE
frontcover.pdf 1 4/12/13 10:51 AM
CSDA Mission
The mission of the Concrete Sawing & Drilling Association is to promote the use of professional specialty sawing and drilling contractors and their methods. In support of this goal, the CSDA Code of Ethics demands that members pursue the highest standards of safety, quality and integrity. A second objective is to provide a forum in which members can share their ideas, needs and concerns in a constructive framework to further enhance concrete sawing and drilling technologies.
Concrete Sawing & Drilling Association13577 Feather Sound Drive, Suite 560 Clearwater, FL 33762Tel: 727-577-5004www.csda.org
| 12013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
Section 1: Member Resources
Officers 4
Board of Directors 4
Committees 5
Presidents 5
Section 2: Membership
North American Contractors 9
United States 9
Canada 20
Overseas Contractors 21
Manufacturers 23
Distributors 25
Affiliates 26
Reciprocal Associations 28
Member Benefits 29
Membership Application 30
Section 3: Resource Guide
Table of Contents
Publication date: June 2013. For the most up-to-date information, visit www.csda.org.
CSDA ConventionMarch 11–15, 2014The Westin La Poloma Resort & Spa Tucson, Arizona www.csda.org
| 32013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
Section 1: Member Resources
A. Officers
B. Board of Directors
C. Committees
D. Presidents
Publication date: June 2013. For the most up-to-date information, visit www.csda.org.
4 | The AssociATion of cuTTing ProfessionAls • www.csda.org
PresidentJudith O’DayTerra Diamond Industrial1910 South Fremont DriveSalt Lake City, UT 84104Tel: 801-977-0054Email: [email protected]
Vice PresidentKevin BaronWestern Saw, Inc.3200 Camino Del SolOxnard, CA 93030Tel: 805-981-0999Email: [email protected]
Secretary/TreasurerMike OrzechowskiDITEQ Corporation1250 NW Main StreetLee’s Summit, MO 64086Tel: 866-688-1032Email: [email protected]
Past PresidentJim DvoratchekHard Rock Concrete Cutters, Inc.601 Chaddick DriveWheeling, IL 60090Tel: 847-699-0010Email: [email protected]
Executive DirectorPatrick O’BrienConcrete Sawing & Drilling Association13577 Feather Sound Drive, Suite 560Clearwater, FL 33762Tel: 727-577-5004Email: [email protected]
(Terms expiring 2014)
Kevin BaronWestern Saw, Inc.3200 Camino Del SolOxnard, CA 93030Tel: 805-981-0999Email: [email protected]
Tim BeckmanCutting Edge Services Corp.1535 Old S.R. 74Batavia, OH 45103Tel: 513-388-0199Email: [email protected]
Paul DeAndreaDeAndrea Coring & Sawing, Inc.9630 Dallas StreetHenderson, CO 80640Tel: 303-422-3885Email: [email protected]
Steve GarrisonHilti, Inc.6601 Darin WayCypress, CA 90630Tel: 714-230-7410Email: [email protected]
Donna HarrisConcrete Renovation, Inc.6600 Randolph BoulevardSan Antonio, TX 78233Tel: 210-653-6120Email: [email protected]
Ron RapperHusqvarna Construction Products N.A.17400 W 119th StOlathe, KS 66061Tel: 913-928-1007Email: [email protected]
(Terms expiring 2015)
Ty ConnerAustin EnterprisePO Box 81926Bakersfield, CA 93380Tel: 661-589-1001Email: [email protected]
Matt DragonGSSI, Inc.12 Industrial WaySalem, NH 03079Tel: 603-681-2027Email: [email protected]
Matthew FinniganNational Concrete Cutting Inc.7715 Pacific Highway EastMilton, WA 98354Tel: 800-551-0511Email: [email protected]
Mike GreeneGreene’s, Inc.1065 W 750 SWoods Cross, UT 84087Tel: 801-292-6699Email: [email protected]
Greg LipscombDiamond Products Limited333 Prospect StElyria, OH 44035Tel: 919-369-2496Email: [email protected]
Sid KilgoreDixie Diamond Manufacturing205 Buxton CtLilburn, GA 30047Tel: 770-921-2464Email: [email protected]
officers board of directors
| 52013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
CERTIFICATIONPatrick Harris (Chair)Paul DeAndrea (Vice-chair)Patti AustinTim BeckmanJim DvoratchekDonna HarrisJack SondergardKellie VazquezDoug Walker
CONVENTIONKevin Baron (Chair)Patrick O’Brien (Vice-chair)Judith O’Day
ELECTIONDoug Walker (Chair)Mike Greene (Vice-chair)Patti AustinKevin BaronKraig BaronSid KilgoreMike Nelson
FINANCEMike Orzechowski (Chair)Kevin BaronJim DvoratchekSteve GarrisonPatrick O’BrienJudith O’Day
IMAGINGMark DeSchepper Chair)Emily Hammer (Vice-chair)Tony BrunetteGlen DeKokMatt DragonRick NorlandMike OrzechowskiMarty Rack
INTERNATIONALPatrick O’Brien (Chair)Judith O’Day (Vice-chair)
INSURANCE SUB-COMMITTEESteve Garrison (Chair)Tim BeckmanDoug Walker
LONG-RANGE PLANNINGJudith O’Day (Chair)Jim Dvoratchek (Vice-chair)Kevin BaronPatrick O’Brien
MANUFACTURERKevin Baron (Chair)Steve Garrison (Vice-chair)CSDA Manufacturer Members
MARKETINGSid Kilgore (Chair)Greg Lipscomb (Vice-chair)Steve AndersonKevin BaronPeter BigwoodTy ConnerMatt DragonSid KilgoreMike NelsonKevin Warnecke
MEMBERSHIPTy Conner (Chair)Donna Harris (Vice-chair)Peter BigwoodMatt DragonMike GreeneLarry LiddleMike NelsonErin O’Brien
NEXT GENERATIONMatt Dragon (Chair)Sid Kilgore (Vice-chair)CSDA Next Gen Members
POLISHINGAndy Bowman (Chair)Doug Walker (Vice-chair)Mark Michaels
SAFETYDan Cowperthwait (Chair)Matthew Finnigan (Vice-chair)Patti AustinJim DvoratchekSteve GarrisonMike GreeneDonna HarrisMike IiamsGary JohnsonGreg LipscombMark MichaelsMike OrzechowskiRick NorlandRon RapperJack SondergardAndy VargaKellie VazquezKevin Warnecke
STANDARDS & SPECIFICATIONSMike Orzechowski (Chair)Tim Beckman (Vice-chair)Mark DeSchepperDan CowperthwaitMark MichaelsJack SondergardKevin Warnecke
TRAININGKevin Warnecke (Chair)Ron Rapper (Vice-chair)Patti AustinTim BeckmanDan CowperthwaitPaul DeAndreaSteve GarrisonDonna HarrisPatrick HarrisRick NorlandMike OrzechowskiJack Sondergard
1972 A.C.Peterson1972, 1973, 1974 Lester F. Kuzmick1975 G.H. “Dek” Dekker1976 Steve Schipper1977 Chuck Tackett1978, 1979 Ted Page1980 Ken Barnes1981 Barry Woods1982 Ron Van Zee1983 Ken Major1984, 1985 Jim Doolin1986 Ralph Mattiola1987 Larz Smith1988 Jack Johnson1989, 1990 Bill Solberg1991, 1992 Steve Garrison1993 Richard Long1994 Greg Broom1995 Daniel Vander Mey1996 David Lessor1997 Weldon Birch1998 Rick Norland1999, 2000 Jim Dvoratchek2001, 2002 Roger Allen2003, 2004 Ted Johnston2005, 2006 Susan Hollingsworth2007, 2008 Tom Stowell2009, 2010 Doug Walker2011, 2012 Jim Dvoratchek 2013 Judith O’Day
presidentscommittees
CSDA Training 2013–2014
Online Training Program www.csdatraining.com 24/7
World of Concrete January 20–24, 2014 Las Vegas, NV
Concrete Polishing November 7&8, 2013 Bakersfield, CA
Session Locations:
Operator Certification November 4–9, 2013 Clearwater, FL
The Association of Cutting Professionals
| 72013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
Section 2: Membership
A. North American Contractors
United States
Canada
Mexico
B. Overseas Contractors
C. Manufacturers
D. Distributors
E. Affiliates
F. Reciprocal Associations
G. Member Benefits
H. Membership Application
Publication date: June 2013. For the most up-to-date information, visit www.csda.org.
8 | The AssociATion of cuTTing ProfessionAls • www.csda.org
Operator Certification
CSDA’s Operator Certification is a comprehensive six-day program that combines detailed classroom instruction with on-slab demonstration and evaluation of advanced concrete cutting techniques. Safety, proper equipment use and efficiency are emphasized.
CSDA certified operators are recognized industry-wide for their proficiency in the full range of sawing and drilling applications.
Minimum Requirements
• Successful completion of CSDA Cutting Edge, Slab Sawing & Drilling 101, Wall Sawing 101 or Wire Sawing 101
• Three years field experience (4,500 hours)
• Successful completion of 10-hour OSHA Construction Safety course
• No more than one lost-time injury within the last three years
• Unrestricted driver’s license
• Negative drug test within 30 days of taking the course
Certifications
Companies in this directory who have invested time and money to send their operators through the CSDA Operator Certification course are designated with the logo.
Operator Certification November 4–9 Clearwater, Florida
| 92013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
Company Certification
The CSDA Company Certification Program is the first of its kind in the industry. This 3-tier program has been created for cutting contractors to provide owners, architects, engineers, general contractors and government officials with a valuable pre-qualification tool that acknowledges sound business practices. It is available to all sawing and drilling contractors.A company must meet the following criteria to achieve certification:
Companies in this directory who have invested time and money to meet the requirements of this program and have successfully completed the application process are designated with a logo that corresponds to the level of certification achieved.
Level 1
• Meet the basic safety, financial and insurance requirements of the industry
• Successfully pass a written application review
Level 3
• Have a total quality management system in place
• Provide evidence it is committed to a high standard of safety and sound business practices
• Pass an industry-specific quality audit, conducted onsite, which mirrors the internationally recognized standard ISO9000
Level 2
• Undertake sound operational and financial best practices in addition to the criteria set out for the first level
• Provide evidence it has took part in basic training or certification programs to better its employees and the company as a whole
• Successfully pass a written application review
The CSDA Company Certification Program provides me with documentation that I can present to customers and general contractors. I can prove that the company not only
performs safe and efficient cutting work, but also uses sound business practices.”
—Tim Beckman, owner of Cutting Edge Services Corp.
10 | The AssociATion of cuTTing ProfessionAls • www.csda.org
Alabama
International Drilling & Sawing, Inc. Tim RudderPO Box 250013Montgomery, AL 36125Tel: 334-288-2355Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Penhall Company - Birmingham Clark Thompson1890 Woodlands Industrial DrTrussville, AL 35173Tel: 205-951-0041Email: [email protected]: FS, CD, WL, WR, SD, CC
Prather Concrete Cutting, Inc. Tracy HeatonPO Box 4Cusseta, AL 36852Tel: 334-756-2668Email: [email protected]: FS, CD, WL, WR, SD
Alaska
Alaska Concrete Sawing, Inc. Mathew Chambers6831 Debarr RdAnchorage, AK 99504Tel: 907-338-3300Email: [email protected]: FS, CD, WL, SD, CC
Arizona
Diamondback Concrete Cutting, Inc. Kyle Rea6216 E Janice WayScottsdale, AZ 85254Tel: 602-309-3314Email: [email protected]: FS, CD, WL
Floor Demo LLC Dennis Shy1626 W 12th PlaceTempe, AZ 85281Tel: 480-209-3449Email: [email protected]
Penhall Company - Phoenix Nate Keller3301 E Wood StPhoenix, AZ 85040Tel: 480-967-5029Email: [email protected]: FS, CD, WL, WR, SD, CC
Penhall Company - Tucson Michael A. Smith4847 N Daisy Dawn Pl Ste 125Tucson, AZ 85705Tel: 520-297-9766Email: [email protected]: FS, CD, WL, WR, SD, CC
California
Austerman, Inc. Bob Austerman1960 Channel DrWest Sacramento, CA 95691Tel: 916-371-1031Email: [email protected]: FS, CD, WL, SD, CC, GPR
Austin Enterprise Ty ConnerPO Box 81926Bakersfield, CA 93380Tel: 661-589-1001Email: [email protected]: FS, CD, WL, SD, CC
Big K Concrete Coring, Inc. Corey KeifnerPO Box 1133Sunland, CA 91041Tel: 818-771-0777Email: [email protected]: FS, CD, WL, SD
Break Away Concrete Cutting, Inc. Kit L. Sanders2025 Stone AveSan Jose, CA 95125Tel: 408-920-9668Email: [email protected]: FS, CD, WL, SD, GPR
Cal West Concrete Cutting, Inc. Rick Cissell1153 Vanderbilt CirManteca, CA 95337Tel: 209-823-2236Email: [email protected]: FS, CD, WL, WR, SD, GPR
Cal West Concrete Cutting, Inc. Weldon Birch3000 Tara CtUnion City, CA 94587Tel: 510-656-0253Email: [email protected]: FS, CD, WL, WR, SD, GPR
California Cut & Core, Inc. Kent R. Hicks11359 Sunrise Gold Cir Ste ARancho Cordova, CA 95742Tel: 916-853-9224Email: [email protected]: FS, CD, WL, SD, CC
CENCAL Demolition, Inc. Michael Gonzales3299 S Cedar AveFresno, CA 93725Tel: 559-291-3366Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR, P
Concrete Wall Sawing Co. Kenny BarnesPO Box 2419San Leandro, CA 94577Tel: 510-483-8440Email: [email protected]: FS, CD, WL, WR, SD, CC
CT Concrete Cutting, Inc. Chris Tompkins26341 Jefferson Ave, Suite BMurrieta, CA 92562Tel: 951-698-7745Email: [email protected]
Del Secco Diamond Core & Saw, Inc. Jeanne Del Secco31739 Knapp StHayward, CA 94544Tel: 510-475-6313Email: [email protected]: FS, CD, WL, SD, CC, GPR
Fast Forward Concrete Cutting Jeff Hale7738 Burnet AveVan Nuys, CA 91405Tel: 800-648-6469Email: [email protected]: FS, CD, WL, SD
G Seven Geno Cotrone19751 Hwy 108Sonora, CA 95370Tel: 209-743-2529Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR, P
Housley Demolition Co., Inc. Brian Kleinkopf1804 N. Kelsey StreetVisalia, CA 93291Tel: 559-909-5212Email: [email protected]
north american contractors
SERVICES: Flat Sawing (FS), Core Drilling (CD), Wall Sawing (WL), Wire Sawing (WR), Selective Demolition (SD), Curb Cutting (CC), Ground Penetrating Radar (GPR), Concrete Polishing (CP)
| 112013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
Kroeker IncJay Harvey4627 C Chestnut AveFresno, CA 93725Tel: 559-237-3764E-mail: [email protected] Services: FS, CD, WL, SD, CC
Lombardo Diamond Core Drilling Co., Inc. Rick Long2225 De La Cruz BlvdSanta Clara, CA 95050Tel: 408-727-7922Email: [email protected]: FS, CD, WL, WR, SD, CC
Pacific Coast Concrete Cutting, Inc. Rick Engelhardt3042 Cordua CtSimi Valley, CA 93063Tel: 805-581-1360Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Pacific Coast Cutters, Inc. Catherine Stallman450 Lakeville St Ste BPetaluma, CA 94952Tel: 707-765-0661Email: [email protected]: FS, CD, WL, WR, SD
Penhall Company - Anaheim Joe Morello1801 Penhall WayAnaheim, CA 92801Tel: 714-772-6450Email: [email protected]: FS, CD, WL, WR, SD, CC
Penhall Company - Burbank Jeff Kleeman255 S Flower StBurbank, CA 91502Tel: 818-562-1250Email: [email protected]: FS, CD, WL, WR, SD, CC
Penhall Company - Corporate George Bush1801 Penhall WayAnaheim, CA 92801Tel: 714-772-6450Email: [email protected]: FS, CD, WL, WR, SD, CC
north american contractors
SERVICES: Flat Sawing (FS), Core Drilling (CD), Wall Sawing (WL), Wire Sawing (WR), Selective Demolition (SD), Curb Cutting (CC), Ground Penetrating Radar (GPR), Concrete Polishing (CP)
Penhall Company - Los Angeles Ralph Mercado14801 S Avalon BlvdGardena, CA 90248Tel: 310-225-6690Email: [email protected]: FS, CD, WL, WR, SD, CC
Penhall Company - Oakland Scott Hustad13750 Catalina StSan Leandro, CA 94577Tel: 510-357-8810Email: [email protected]: FS, CD, WL, WR, SD, CC
Penhall Company - Sacramento Chris Marr8416 Specialty CirSacramento, CA 95828Tel: 916-386-1589Email: [email protected]: FS, CD, WL, WR, SD, CC
Penhall Company - San Bernardino Rick Viefhaus841 Iowa AveRiverside, CA 92507Tel: 951-369-2800Email: [email protected]: FS, CD, WL, WR, SD, CC
Penhall Company - San Diego Keith Martin5775 Eastgate DrSan Diego, CA 92121Tel: 858-550-1111Email: [email protected]: FS, CD, WL, WR, SD, CC
Penhall Company - Santa Clara Scott Hustad696 Walsh AveSanta Clara, CA 95050Tel: 408-970-9494Email: [email protected]: FS, CD, WL, WR, SD, CC
PG Cutting Services Juan GarciaPO Box 695Lake Elsinore, CA 92531Tel: 951-245-6464Email: [email protected]: FS, CD, WL, WR, SD, GPR
Prime Cuts Concrete Sawing & Coring Shane Floyd17970 Lakeshore Dr Ste A&BLake Elsinore, CA 92530Tel: 951-245-6646Email: [email protected]
R.J. Allen, Inc. Andrew Allen10392 Stanford AveGarden Grove, CA 92840Tel: 714-539-1022Email: [email protected]: FS, CD, WL, SD, CC
Safe2core, Inc. Antonio Guzman3851 Charter Park Drive, Ste MSan Jose, CA 95136Tel: 408-266-7000Email: [email protected]
Spartan Concrete & Asphalt Cutting, Inc. Mike ValkisPO Box 1763Palm Springs, CA 92263Tel: 760-251-8095Email: lvalkis@spartanconcretecutting.comwww.spartanconcretecutting.comServices: FS, CD, WL, SD, GPR
Wright Sawing & Breaking Amarie WrightPO Box 7715Ventura, CA 93006Tel: 805-658-1815Email: [email protected]: FS, CD, WL, SD
Colorado
DeAndrea Coring & Sawing, Inc. Paul DeAndrea9630 Dallas StHenderson, CO 80640Tel: 303-422-3885Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Diamond Drilling & Sawing Co. Henk Dykhouse1157 S Bannock StDenver, CO 80223Tel: 303-733-3741Email: [email protected]: FS, CD, WL, WR, SD
Penhall Company - Denver Scott Whalen1385 Umatilla StDenver, CO 80204Tel: 303-934-3866Email: [email protected]: FS, CD, WL, WR, SD, CC
12 | The AssociATion of cuTTing ProfessionAls • www.csda.org
Russ T. Diamonds, Inc. Russ ThompsonPO Box 21647Denver, CO 80221Tel: 303-810-7082Email: [email protected]: FS, CD, WL, WR, SD
Connecticut
Gratton Concrete Sawing & Drilling, LLC Roger Gratton198 Angel RdPomfret Center, CT 06259Tel: 860-974-0670Email: [email protected]: FS, CD, WL, SD
Pro Cut, Inc. Ben Ulrich26 S Canal StPlainville, CT 06062Tel: 860-620-0171Email: [email protected]: FS, CD, WL, WR, CC
Florida
Accu-Cut Concrete Services, Inc. John J. Robinson IIIPO Box 244Palm Harbor, FL 34682Tel: 727-787-4843Email: [email protected]: FS, CD, WL, WR
Ace Contracting Enterprises, Inc. Keith Thompson3035 NE 21st Way Ste 6Gainesville, FL 32609Tel: 352-372-9878Email: [email protected]: FS, CD, WL, SD, CC
Ace Contracting Enterprises, Inc. Robert N. DakePO Box 896Safety Harbor, FL 34695Tel: 727-725-5513Email: [email protected]: FS, CD, WL, SD, CC
Big T Mid Florida Dave Hazard561 Old Geneva RdGeneva, FL 32732Tel: 407-349-5003Email: [email protected]: FS, CD, WL, SD, CC
Concrete Cutting & Breaking Co. Ed Gushwa215 Taft Vineland RdOrlando, FL 32824Tel: 407-257-0274Email: [email protected]: FS, CD, WL, WR, SD, CC
Construction Debris Removal, Inc. Vernon D. Keith1535 SR 207St. Augustine, FL 32086Tel: 904-471-9709Email: [email protected]
Garrard Building Contractors, LLC Keith Hall5578 Commercial BlvdWinter Haven, FL 33880Tel: 863-585-3624Email: [email protected]: FS, WL, SD, CC
International Drilling & Sawing, Inc. Marty Wooten4522 Saufley Field RdPensacola, FL 32526Tel: 850-470-0755Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Speedy Concrete Cutting of Central Florida, Inc. John Gunther1000 Charles StLongwood, FL 32750Tel: 800-556-5153Email: [email protected]
Speedy Concrete Cutting of Tampa, Inc. Jason Ferguson3212 N 40th St Ste 106BTampa, FL 33605Tel: 888-716-2888Email: [email protected]
Speedy Concrete Cutting, Inc. Todd Barna2579 NW 19th StFt. Lauderdale, FL 33311Tel: 954-730-7200Email: [email protected]
Georgia
Dixie Concrete Cutting Co., Inc. Greg Broom5297 Port Blvd SCollege Park, GA 30349Tel: 404-761-1100Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Penhall Company - Atlanta Daniel Behen6940 Oak Ridge Pkwy SWAustell, GA 30168Tel: 770-941-3401Email: [email protected]: FS, CD, WL, WR, SD, CC
Speedy Concrete Cutting of Georgia, Inc. Daniel Mounts411 C Telfair RdSavannah, GA 31415Tel: 877-773-3351Email: [email protected]
Hawaii
Pacific Concrete Cutting & Coring, Inc. Thomas BrainerdPO Box 4408Kailua-Kona, HI 96745Tel: 808-960-6567Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Pacific Concrete Cutting & Coring, Inc. Eli BrainerdPO Box 662261Lihue, HI 96766Tel: 808-245-7171Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Penhall Company/Concrete Coring Company of Hawaii John Neff99-1026 Iwaena StAiea, HI 96701Tel: 808-488-8222Email: [email protected]: FS, CD, WL, WR, SD, CC
Illinois
Chicago Cut Concrete Cutting Tiffany Phillips141 W. Jackson # 1734Chicago, IL 60604Tel: 312-813-3122Email: [email protected]
North AmericAN coNtrActors
SERVICES: Flat Sawing (FS), Core Drilling (CD), Wall Sawing (WL), Wire Sawing (WR), Selective Demolition (SD), Curb Cutting (CC), Ground Penetrating Radar (GPR), Concrete Polishing (CP)
| 132013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
Cobra Concrete Cutting Services Co. Daniel Foley2416 E Oakton StArlington Heights, IL 60005Tel: 773-775-1111Email: [email protected]: FS, CD, WL, WR, SD, CC
Custom Concrete Cutting Stacy Houck6818 Waterford DriveTel: 815-790-1178Email: [email protected]
Diamond Coring Co., Inc.Anthony Cappello, Jr. 11800 S Ewing AveChicago, IL 60617Tel: 773-978-5000E-mail: [email protected]: www.diamondcoring.com
Gronemeier Concrete Cutting, Inc.Catherine Gronemeier22 White PlBloomington, IL 61701Tel: 309-829-7991Email: [email protected]: www.gronemeier.com
Hard Rock Concrete Cutters, Inc. Jim Dvoratchek601 Chaddick DrWheeling, IL 60090Tel: 847-699-0010Email: jimd@hardrockconcretecutters.comwww.hardrockconcretecutters.comServices: FS, CD, WL, WR, SD, CC, GPR
Interstate Curb & Concrete Cutting, Inc. Steven R. Frech1466 N Tanglewood AvePalatine, IL 60067Tel: 847-776-8030Email: [email protected]: FS, CD, WL, CC, GPR
PAB Services, Inc. Peggy BrownPO Box 6614Rockford, IL 61125Tel: 815-399-7770Email: [email protected]: FS, CD, WL, CC, SD, P
Penhall Company - Champaign Michael Long2601 N Cardinal RdChampaign, IL 61822Tel: 217-351-9461Email: [email protected]: FS, CD, WL, WR, SD, CC
Quick Cuts Concrete Cutting Services, LLC Samantha Smith858 Natalie WayBelvidere, IL 61008Tel: 815-547-7018Email: [email protected]
Roughneck Concrete Drilling & Sawing Karen Elin Johnson8400 Lehigh AveMorton Grove, IL 60053Tel: 847-966-6666Email: [email protected]: FS, CD, WL, WR, SD, GPR
Indiana
FSPS, LLC Darrell Cox9268 S 400 EMarkleville, IN 46056Tel: 765-215-0638Email: [email protected]: FS, CD, WL, WR, SD, CC
Penhall Company - Indianapolis Cory Pastotnik5440 Rock Hampton CtIndianapolis, IN 46268Tel: 317-875-7601Email: [email protected]: FS, CD, WL, WR, SD, CC
The Concrete Surgeons, Inc. John Serban4761 Industrial PkwyIndianapolis, IN 46226Tel: 800-822-3844Email: [email protected]: FS, CD, WL, WR, SD
Iowa
Ace Concrete Cutting Ted Callahan715 49th StMarion, IA 52302Tel: 319-447-0223Email: [email protected]
AeroSaw, Inc. Mike Hanson3466 Dolphin Dr SEIowa City, IA 52240Tel: 319-337-8811Email: [email protected]: FS, CD, WL, WR, SD, CC
Henriksen Contracting, LLC Charlie Henriksen3754 SE Capitol CirGrimes, IA 50111Tel: 515-986-4243Email: charlie@henriksencontracting.comwww.henriksencontracting.comServices: FS, CD, WL, SD, CC
Kansas
M6 Concrete Cutting & Coring Jamey Johnston1030 S McComas StWichita, KS 67213Tel: 316-263-7251Email: [email protected]: FS, CD, WL, WR, SD
M6 Concrete Cutting & Coring NE Kansas Wesley MyersPO Box 18Andore, KS 67002Tel: 785-410-3340Email: [email protected]: FS, CD, WL, WR, SD
Precision Cutting & Coring, LLC Michael Iiams4439 Shawnee DrKansas City, KS 66106Tel: 913-681-9050Email: [email protected]
Rick’s Concrete Sawing, Inc. James R. MannPO Box 5634Topeka, KS 66605Tel: 785-862-5400Email: [email protected]: FS, CD, WL, CC
Kentucky
Capitol Drilling & Sawing of KY, Inc. John B. Joest, Jr.4700 Bardstown RdElizabethtown, KY 42701Tel: 270-765-7377Email: [email protected]: FS, CD, WL, WR, SD
Taylor’s Concrete Cutting Services, LLC Ron TaylorPO Box 830Franklin, KY 42135Tel: 270-598-9400Email: [email protected]: FS, CD, WL, GPR
North AmericAN coNtrActors
SERVICES: Flat Sawing (FS), Core Drilling (CD), Wall Sawing (WL), Wire Sawing (WR), Selective Demolition (SD), Curb Cutting (CC), Ground Penetrating Radar (GPR), Concrete Polishing (CP)
14 | The AssociATion of cuTTing ProfessionAls • www.csda.org
Louisiana
A & B Concrete Coring Co., Inc. Richard H. Jones, Jr.20975 Plank RdZachary, LA 70791Tel: 225-654-2873Email: [email protected]: FS, CD, WL, WR, SD, CC
All Around Concrete Cutting, Inc.Heidi Labourdette-Wyatt724 Little Farms AveMetairie, LA 70003504-739-9166allaroundconcrete@yahoo.comwww.allaroundconcretecutting.com
Specialty Demolition, LLC Craig Caliva909 S Broad StNew Orleans, LA 70125Tel: 504-821-7899Email: [email protected]: FS, CD, WL, SD
Maryland
Brookbank Core Drilling & Sawing, Inc. Joyce BrookbankPO Box 6363Waldorf, MD 20603Tel: 301-373-8030
Concrete Technology Services Mid-Atlantic, Inc. Terrance Gilliam10005 Good Luck RdGlenndale, MD 20769Tel: 301-794-7500Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Delta Contractors & Associates, LLC Steven Parson605 S Caton AveBaltimore, MD 21229Tel: 410-624-0990Email: [email protected]
East Coast Concrete Specialities, Inc. Matt Hogan7229 Montevideo RdJessup, MD 20794Tel: 703-478-0708Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR, P
G & M Services, LLC Anthony Manning7525 Connelley Dr Ste T-UHanover, MD 21076Tel: 410-787-8828Email: [email protected]: FS, CD, WL, WR, SD, GPR
Power Component Systems, Inc. Brian Lawton7526 Connelley Dr Ste RHanover, MD 21076Tel: 410-760-0022Email: brian@powercomponentsystems.comwww.powercomponentsystems.comServices: FS, CD, WL, WR, SD
Massachusetts
Cornerstone Masonry Services Christopher Lammey54 Clapp StNorton, MA 02766Tel: 508-285-6469Email: [email protected]
Jack Doherty Contracting, LLC Jack Doherty1 Joseph TerWoburn, MA 01801Tel: 781-983-5436Email: [email protected]: FS, CD, WL, SD
Jack Moore Associates, Inc. Jack Moore250 Barber AveWorcester, MA 01606Tel: 508-853-3991Email: [email protected]: FS, CD, WL, WR, SD, GPR
Pro Cut, Inc. Ron Culgin124 Calvary StWaltham, MA 02453Tel: 781-899-0006Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Witch Enterprises, Inc. Craig A. DamonPO Box 673Agawam, MA 01001Tel: 413-786-7314Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Michigan
Concrete Cutting & Breaking Co. Dan Vander Mey4501 Airwest Dr SEKentwood, MI 49512Tel: 616-554-4876Email: [email protected]: FS, CD, WL, WR, SD, CC
Concrete Cutting Specialists, Inc. Mike Oomen10333 Hercules RdFreeland, MI 48623Tel: 989-695-5344Email: [email protected]: FS, CD, WL, SD, CC
Cougar Contracting, Inc. Joe Pejakovich29305 Wall StWixom, MI 48393Tel: 248-348-8860Email: joepejakovich@cougarcontracting.comwww.cougarcontracting.comServices: FS, CD, WL, WR, SD, CC
Cut and Core Concrete Cutting, LLC Michael Hofer1222 E 11 Mile RdMadison Heights, MI 48070Tel: 734-219-8209Email: [email protected]: FS, CD, WL, CC
Detroit Diamond Drilling, Inc. Kirt Hardoin7021 W Eight Mile RdDetroit, MI 48221Tel: 313-864-3600Email: [email protected]
Diamond Concrete Sawing Aaron Louisell855 Godfrey Ave SWGrand Rapids, MI 49503Tel: 800-968-3745Email: aaron@diamondconcretesawing.comwww.diamondconcretesawing.comServices: FS, CD, WL, WR, SD, CC, GPR
Diamond Concrete Sawing Dan Scholten738 East WalnutKalamazoo, MI 39007Tel: 269-327-1919Email: dans@diamondconcretesawing.comwww.diamondconcretesawing.comServices: FS, CD, WL, WR, SD, CC, GPR
North AmericAN coNtrActors
SERVICES: Flat Sawing (FS), Core Drilling (CD), Wall Sawing (WL), Wire Sawing (WR), Selective Demolition (SD), Curb Cutting (CC), Ground Penetrating Radar (GPR), Concrete Polishing (CP)
| 152013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
Diamond Subsurface Imaging Glenn Dekok855 Godfrey Ave SWGrand Rapids, MI 49503Tel: 616-245-3100Email: glennd@diamondsubsurfaceimaging.comwww.diamondsubsurfaceimaging.com
Elmer’s Crane & Dozer, Inc. Eric Sanborn3600 Rennie School RdTraverse City, MI 49685Tel: 231-943-3443Email: [email protected]
FMG Concrete Cutting, Inc. Frank Gobright3515 S Old US Highway 23Brighton, MI 48114Tel: 810-227-3650Email: [email protected]: FS, CD, WL, WR, CC
K & H Concrete Cutting, Inc. Ed Huisman1159 Electric Ave Ste AMoline, MI 49335Tel: 616-877-4910Email: [email protected]
Minnesota
Advanced Concrete Sawing, Inc. Bennett Jones1245 Pierce Butler RteSt.Paul, MN 55104Tel: 651-633-8499Email: [email protected]: FS, CD, WL, WR, SD, CC
Langford Tool & Drill Co./ Mason-Cutters David McCulloch1125 Washington Ave SMinneapolis, MN 55415Tel: 612-332-7741Email: [email protected]: FS, CD, WL, WR, SD
Mississippi
Diamond Concrete Sawing Gary Williams2909 26th AveGulfport, MS 49546Tel: 228-392-2503Email: garyw@diamondconcretesawing.comwww.diamondconcretesawing.comServices: FS, CD, WL, WR, SD, CC, GPR
McCrary Construction ServicesLu McCrary720 Lehmberg Rd Ste 3Columbus, MS 39702662-244-3424lu.mccrary@mccrarywest.comwww.mccraryconstructionservices.com
Missouri
K.C. Coring & Cutting Construction, Inc. Joe Freed 7240 Central St Kansas City, MO 64114 Tel: 816-523-2015 E-mail: [email protected]: FS, CD, WL, WR, SD, CC
Merlin Stelzer Services, Inc. Richard Stelzer4144 Papin StSt. Louis, MO 63110Tel: 314-535-7540Email: [email protected]: FS, CD, WL, WR, SD
Miller’s Pro-Cut, Inc. John Miller5900 E 154th TerGrandview, MO 64030Tel: 816-322-7917Email: [email protected]: FS, CD, WL, WR, SD, CC
Montana
Precision Concrete Cutting Pete BarnardPO Box 30142Billings, MT 59107Tel: 406-855-7733Email: [email protected]: FS, CD, WL, SD
Nebraska
Concrete Saw & Core, Inc. Matthew Ackerman5100 N 27th St Ste A-2 MB 114Lincoln, NE 68521Tel: 402-525-7856Email: [email protected]: FS, CD, WL, WR, SD
Concrete Saw & Core, Inc. Matthew AckermanPO Box 745North Platte, NE 69103Tel: 308-532-7515Email: [email protected]: FS, CD, WL, WR, SD
Omaha Concrete Sawing, Inc. Dick Jepson9413 N 29th StOmaha, NE 68112Tel: 402-455-8823Email: [email protected]: FS, CD, WL, CC
New Hampshire
Cut & Core Bill HarperPO Box 350Jaffrey, NH 03452Tel: 603-532-8580Email: [email protected]: FS, CD, WL, SD
Kidder Concrete Cutting & Coring Lisa White22 Danville RdPlaistow, NH 03865Tel: 603-382-1799Email: [email protected]: FS, CD, WL, SD, CC
Pro Cut of New Hampshire, Inc. Daryl Moore183 Route 125 Unit C3Brentwood, NH 03833Tel: 603-626-0440Email: [email protected]: FS, CD, WL, WR, CC
New Jersey
Advanced Coring & Cutting Corp. Steven C. Lisowski1766 Route 34Farmingdale, NJ 07727Tel: 732-681-7733Email: steven@advancedcoringandcutting.comwww.advancedcoringandcutting.comServices: FS, CD, WL, WR, SD
Atlantic Concrete Cutting, Inc. Douglas WalkerPO Box 98Mt. Holly, NJ 08060Tel: 609-261-7200Email: dwalker@atlanticconcretecutting.comwww.atlanticconcretecutting.comServices: FS, CD, WL, WR, SD, CC, GPR
Atlantic Concrete Cutting, Inc. Stuart L. Fishman11 Furler StTotowa, NJ 07512Tel: 609-685-4602Email: sfishman@atlanticconcretecutting.comwww.atlanticconcretecutting.comServices: FS, CD, WL, WR, SD, CC, GPR, P
North AmericAN coNtrActors
SERVICES: Flat Sawing (FS), Core Drilling (CD), Wall Sawing (WL), Wire Sawing (WR), Selective Demolition (SD), Curb Cutting (CC), Ground Penetrating Radar (GPR), Concrete Polishing (CP)
16 | The AssociATion of cuTTing ProfessionAls • www.csda.org
Commercial Coring & Sawing Ronald Lalusis2306 Wallace BlvdCinnaminson, NJ 08077Tel: 856-786-8150Email: [email protected]: FS, CD, WL, WR, SD, CC
Patriot Sawcutting Incorporated Mike Garrett103 S Van Brunt StEnglewood, NJ 07631Tel: 855-729-2887Email: [email protected]: FS, CD, WL, SD, CC
New Mexico
Precision Concrete Services, Inc. Jeff Whyman44 Campbell CtLos Lunas, NM 87031Tel: 505-865-7476Email: [email protected]: FS, CD, WL, SD, P
New York
Capital Concrete Cutting, Inc. Richard Zakaib336 Harris Hill RdWilliamsville, NY 14221Tel: 800-288-2872Email: [email protected]: FS, CD, WL, WR, CC
Concrete Cutting & Breaking Co. Mark Navel4025 Walden AveLancaster, NY 14086Tel: 716-684-0262Email: [email protected]: FS, CD, WL, WR, SD, CC
J.P. Hogan Coring & Sawing, Inc. Jack Hogan680 Gulf AveStaten Island, NY 10314Tel: 718-761-7014Email: [email protected]: FS, CD, WL, WR, SD, CC
MMG Industrial Matt Gehman186 Colgate AveBuffalo, NY 14220Tel: 716-348-3434Email: [email protected]: FS, CD, WL, WR, SD
Nevada
Penhall Company - Las Vegas Dave Henning4755 W University AveLas Vegas, NV 89103Tel: 702-736-6033Email: [email protected]: FS, CD, WL, WR, SD, CC
Penhall Company - Reno Mark Bray550 E Parr BlvdReno, NV 89512Tel: 775-786-8498Email: [email protected]: FS, CD, WL, WR, SD, CC
R & K Concrete Cutting, Inc. Donald L. Pike II3922 Octagon Rd Ste BN. Las Vegas, NV 89030Tel: 702-452-3866Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
North Carolina
Alrays International Alan Wray8463 Keven CirSherrills Ford, NC 28673Tel: 704-724-4066Email: alan@alraysconcretecutting.comwww.alraysconcretecutting.comServices: FS, CD, WL, SD, GPR
Concrete Sawing Solutions Div. of Swank Construction Co., LLC Jason Manning455 Hein DrGarner, NC 27529Tel: 919-662-5353Email: [email protected]: FS, CD, WL, WR, SD
Core Master, LLC Lisa GonzalezPO Box 8946Rocky Mount, NC 27804Tel: 866-451-5661Email: [email protected]: FS, CD, WL, SD
DARI Concrete Sawing and Drilling Jared London421 Raleigh View RdRaleigh, NC 27610Tel: 919-278-8145Email: [email protected]: FS, CD, WL, WR, SD
Penhall Company - Charlotte Keith Medlin2130 Gateway BlvdCharlotte, NC 28208Tel: 704-392-0644Email: [email protected]: FS, CD, WL, WR, SD, CC
Penhall Company - Raleigh Paul Mounts111 First Flight LnMorrisville, NC 27560Tel: 919-859-9911Email: [email protected]: FS, CD, WL, WR, SD, CC
North Dakota
Advanced Cutting Inc Florian AberlePO Box 2743Bismarck, ND 58502Tel: 701-258-3734Email: [email protected]
EdSons Construction, LLC Kevin Nagel1220 N 11th StBismarck, ND 58501Tel: 701-222-4289Email: [email protected]: FS, CD, WL, WR, SD, CC
Ohio
Concrete Coring Company of Cincinnati, Inc. Hal Edington7210 Edington DrCincinnati, OH 45249Tel: 513-489-3555Email: [email protected]: FS, CD, WL, WR, SD, CC
Concrete Cutting & Breaking Co. Jeff Miller4568 E 71st StCleveland, OH 44105Tel: 440-546-0500Email: [email protected]: FS, CD, WL, WR, SD, CC
Cutting Edge Services Corp. Tim Beckman1535 Old State Route 74Batavia, OH 45103Tel: 513-388-0199Email: beckman@cuttingedgeservices.comwww.cuttingedgeservices.comServices: CD, WL, WR, SD
north american contractors
SERVICES: Flat Sawing (FS), Core Drilling (CD), Wall Sawing (WL), Wire Sawing (WR), Selective Demolition (SD), Curb Cutting (CC), Ground Penetrating Radar (GPR), Concrete Polishing (CP)
| 172013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
Donley Concrete Cutting Company David Donley1441 Gest StreetCincinnati, OH 45203Tel: 513-421-1950Email: [email protected]: FS, CD, WL, WR, CC, GPR
Donley Concrete Cutting Company David DonleyPO Box 272Pickerington, OH 43147Tel: 614-834-0300Email: [email protected]: FS, CD, WL, WR, CC, GPR
Duffey Concrete Cutting, Inc. Scott LeStrange611 Daniels AveToledo, OH 43609Tel: 419-241-1010Email: [email protected]: FS, CD, WL, WR, CC
Midwest Construction Co. Russ Thomas750 Main StMilford, OH 45150Tel: 513-575-2594Email: [email protected]
Ohio Concrete Sawing & Drilling, Inc. Skip Aston8534 W Central AveSylvania, OH 43560Tel: 419-841-5656Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Ohio Concrete Sawing & Drilling, Inc. Sam Farmer314 Conover DrFranklin, OH 45005Tel: 937-746-8999Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Ohio Concrete Sawing & Drilling, Inc. Tom Lenix2935 E 14th AveColumbus, OH 43219Tel: 614-252-1122Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Ohio Concrete Sawing & Drilling, Inc. Tom White1100 Evans AveAkron, OH 44305Tel: 330-633-5104Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Precision Concrete Cutting of Carey, LLC Matthew Leightey3727B County Highway 96Carey, OH 43316Tel: 419-764-0808Email: [email protected]: FS, CD, WL, SD, CC
Precision ProCut Matt Marcum5500 Old Brecksville RdIndependence, OH 44131Tel: 216-573-2400Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Oklahoma
Big K Concrete Sawing & Drilling Kelly BlackPO Box 700Skiatook, OK 74070Tel: 918-396-4611Email: [email protected]: FS, CD, WL, SD
Champion Concrete Services, Inc. Mike BevensPO Box 691976Tulsa, OK 74169Tel: 918-438-6203Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Oregon
A Cut Above Concrete Cutting John Patrick5070 NW 235th Ave Ste 118Hillsboro, OR 97123Tel: 503-547-8806Email: [email protected]
American Concrete Cutting Eric Hill32900 Roberts CtCoburg, OR 97408Tel: 541-726-8597Email: general@americanconcretecutting.comwww.americanconcretecutting.comServices: FS, CD, WL, WR, SD, CC, GPR
Penetrations, Inc. Travis SquiresPO Box 460Turner, OR 97392Tel: 800-522-2673Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR, P
Penhall Company - Portland John Rowley11650 NE Marx StPortland, OR 97220Tel: 503-253-9500Email: [email protected]: FS, CD, WL, WR, SD, CC
Viking Concrete Cutting, Inc. Morgan Steiner5235 Primrose LnKlamath Falls, OR 97601Tel: 541-884-1399Email: vikingconcretecutting@charter.netwww.vikingconcretecutting.comServices: FS, CD, WL, WR, SD
We Cut Concrete Co., Inc. David LannenPO Box 7071Bend, OR 97708Tel: 541-382-4663Email: [email protected]
Pennsylvania
Allegheny Diamond Services Matt Hoffman518 Scenery DrElizabeth, PA 15037-2055Tel: 412-780-3449Email: [email protected]
Atlantic Concrete Cutting, Inc. Jeff BoggsPO Box 58Spring City, PA 19475Tel: 717-599-1966Email: jboggs@atlanticconcretecutting.comwww.atlanticconcretecutting.comServices: FS, CD, WL, WR, SD, CC, GPR
Cardinal International Grooving & Grinding LLC Philip ZuzeloPO Box 450Conshohocken, PA 19428Tel: 610-825-2200Email: philip.zuzelo@cardinalgrooving.comwww.cardinalgrooving.comServices: GV
north american contractors
SERVICES: Flat Sawing (FS), Core Drilling (CD), Wall Sawing (WL), Wire Sawing (WR), Selective Demolition (SD), Curb Cutting (CC), Ground Penetrating Radar (GPR), Concrete Polishing (CP)
18 | The AssociATion of cuTTing ProfessionAls • www.csda.org
Concrete Cutting Systems, Inc. David Nevrotski2514-16 Orthodox StPhiladelphia, PA 19137Tel: 215-533-0652Email: [email protected]: FS, CD, WL
Conewago Concrete Services Kevin Gladis576 Edgegrove RdHanover, PA 17331Tel: 717-632-7722Email: [email protected]: FS, CD, WL, SD
EXCO, INC Ed Lounsberry684 Dunksferry RdBensalem, PA 19020Tel: 215-510-2240Email: [email protected]: CD
Hafner and Son, Inc. Travis Hafner1330 Blue Mountain DrDanielsville, PA 18038Tel: 610-978-8990Email: [email protected]: FS, CD, WL, WR, SD, CC
Keystone Concrete Cutting Co. Pamela Neal325 E Stiegel StManheim, PA 17545Tel: 717-664-0571Email: [email protected]
Matcon Diamond, Inc. David G. Matesic3447 E Carson StPittsburgh, PA 15203Tel: 412-481-0280Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Pitt Service CenterWilliam Markland8031 Pennsylvania AveIrwin, PA 15642Tel: 724-863-1010Email: [email protected]: FS, CD, WL, WR
Power Component Systems, Inc. Charles Cuaz1601 S 19th StHarrisburg, PA 17104Tel: 717-939-8226Email: [email protected]
www.powercomponentsystems.comServices: FS, CD, WL, WR, SD
Pro-Cut Concrete Sawing & Drilling Dennis Shifler101 Wesley DrMechanicsburg, PA 17019Tel: 717-766-2775Email: dennis@procutconcretecutting.comwww.procutconcretecutting.comServices: FS, CD, WL, WR, SD, CC, GPR
Swank Construction Co., LLC Michael J. Golembiewski632 Hunt Valley CirNew Kensington, PA 15068Tel: 724-335-6000Email: [email protected]: FS, CD, WL, WR, SD
Rhode Island
ACE Concrte Cutting Debra Stowik156 Colonial AveCumberland, RI 02864Tel: 401-692-0147Email: [email protected]
Cut-Rite Concrete Cutting Corp. Dennis P. Mello22 Lockbridge StPawtucket, RI 02860Tel: 401-728-8200Email: [email protected]: FS, CD, WL, WR, SD
Pro Cut, Inc. Tom Chadwick10 Amflex DrCranston, RI 02921Tel: 401-464-5001Email: [email protected]: FS, CD, WL, WR, CC
South Carolina
D.M. Conlon Dan-Kel Concrete Coring, Sawing & Scanning DJ ConlonPO Box 7127Myrtle Beach, SC 29572Tel: 843-449-0199Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Dixie Concrete Cutting, Inc. Gary Kraft16 Maple Creek CirGreenville, SC 29607Tel: 864-299-6600
Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Patriot Concrete Cutting, LLC Douglas K. RichardsPO Box 504Piedmont, SC 29673Tel: 864-299-0330Email: [email protected]: FS, CD, WL, WR, SD
Penhall Company - Columbia/Charleston Bill Burchfield2208 Memorial DrCayce, SC 29033Tel: 803-765-0039Email: [email protected]: FS, CD, WL, WR, SD, CC
South Dakota
All States Concrete Cutting SD, Inc. Kenneth Herbek47062 98th StSioux Falls, SD 57108Tel: 877-416-3478Email: [email protected]: FS, CD, WL, WR, SD
Custom Concrete Cutting Kathy Reishus814 Flormann StRapid City, SD 57701Tel: 605-209-6600Email: [email protected]
Tennessee
B & C Concrete Cutting, LLC Brant LesogorPO Box 946Westmoreland, TN 37186Tel: 615-206-0355Email: [email protected]: FS, CD, WL, WR, SD
Bluff City Coring & Cutting, Inc. Marty Henley6612 Reese RdMemphis, TN 38133Tel: 901-383-9763Email: [email protected]: FS, CD, WL, SD, CC, GPR
Concrete Cutting Systems, Inc. Joe MeighanPO Box 12129Knoxville, TN 37912Tel: 865-938-8888
North AmericAN coNtrActors
SERVICES: Flat Sawing (FS), Core Drilling (CD), Wall Sawing (WL), Wire Sawing (WR), Selective Demolition (SD), Curb Cutting (CC), Ground Penetrating Radar (GPR), Concrete Polishing (CP)
| 192013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Concrete Cutting Systems, Inc. Michael Pietrowski116 Cripple Creek LoopWatauga, TN 37694Tel: 423-542-8888Email: [email protected]: FS, CD, WL, WR, CC, GPR
Cuts, Inc. Matthew Hephner3533 Neal DrKnoxville, TN 37918Tel: 865-922-0800Email: [email protected]: FS, CD, WL, WR, SD, CC
E. Luke Greene Company, Inc. Chris Rhyne619 E Maple StJohnson City, TN 37601Tel: 423-926-1151Email: [email protected]: FS, CD, WL, WR, SD
Texas
Accurate Coring, Inc. Cliff GrotePO Box 220523El Paso, TX 79913Tel: 915-886-2600Email: [email protected]: FS, CD, WL, SD, GPR
Aggregate Technologies, Inc. Ronnie Wills10700 Tower Oaks BlvdHouston, TX 77070Tel: 281-579-7229Email: [email protected] Services: FS, CD, WL, WR, SD, GPR
American Inshore Divers Corp. Mike Aiken1804 1st StLiverpool, TX 77577Tel: 281-581-2443Email: [email protected]: CD, WR, SD, GPR
Associated Cutting, Inc. Paul Wyche2676 Brenner DrDallas, TX 75220Tel: 214-350-4436
Email: [email protected]: FS, CD, WL, WR, SD
Coats Coring & Sawing, Inc. Niki CoatsPO Box 508Cleveland, TX 77328Tel: 281-432-2673Email: [email protected]: FS, CD, WL, SD, CC
Concrete Penetrating Co. Larz Smith2303 Shorecrest DrDallas, TX 75235Tel: 214-634-2990Email: [email protected]: FS, CD, WL, WR, SD
Concrete Renovation, Inc. Donna Harris6600 Randolph BlvdSan Antonio, TX 78233Tel: 210-653-6120Email: [email protected]: FS, CD, WL, SD
Diamond Core Drilling Systems, Inc. Randy WendelPO Box 71616Corpus Christi, TX 78467Tel: 361-852-7446Email: [email protected]: FS, CD, WL
GHR Concrete, Inc. Paul GonzalesPO Box 224946Dallas, TX 75222Tel: 214-232-3622Email: [email protected]: FS, CD, WL, SD, CC
Holes Golden Triangle, LLC Susan Hollingsworth9911 Franklin RdHouston, TX 77070Tel: 281-469-7070Email: [email protected]: FS, CD, WL, WR, SD, GPR
Holes Incorporated Kellie Vazquez9911 Franklin RdHouston, TX 77070Tel: 281-469-7070Email: [email protected]: FS, CD, WL, WR, SD, GPR
Holes of San Antonio, Inc. George Major118 Braniff DrSan Antonio, TX 78216Tel: 210-349-5256
Email: [email protected]: FS, CD, WL, SD, CC, GPR
Holes Technology, LP Darlene East9911 Franklin RdHouston, TX 77070Tel: 281-469-7070Email: [email protected]: GPR
LD Consulting, LLC Dan Hollingsworth13910 Longwood DrWillis, TX 77318Tel: 281-898-1763Email: [email protected]
Magnum Sawing & Coring, Inc. Danny SpencerPO Box 153269Irving, TX 75015Tel: 972-251-1300Email: [email protected]: FS, CD, WL, WR, SD
Penhall Company - Austin Kevin Sheridan4201 Felter LnAustin, TX 78744Tel: 512-385-8500Email: [email protected]: FS, CD, WL, WR, SD, CC
Penhall Company - Dallas Richard Hertel1201 Minters Chapel Rd Ste 304Grapevine, TX 76051Tel: 817-416-1846Email: [email protected]: FS, CD, WL, WR, SD, CC
Slab Services, LLC Asa Hidbrader6046 FM 2920 Rd # 405Spring, TX 77379Tel: 281-351-8010Email: [email protected]
Utah
Greene’s, Inc. Mike Greene1065 W 750 SWoods Cross, UT 84087Tel: 801-292-6699Email: [email protected]: FS, CD, WL, WR, SD, CC
north american contractors
SERVICES: Flat Sawing (FS), Core Drilling (CD), Wall Sawing (WL), Wire Sawing (WR), Selective Demolition (SD), Curb Cutting (CC), Ground Penetrating Radar (GPR), Concrete Polishing (CP)
20 | The AssociATion of cuTTing ProfessionAls • www.csdA.org
Neil’s Concrete Cutting, Inc. Neil Hathaway2358 W Whitaker DrTaylorsville, UT 84129Tel: 801-969-1172Email: neil@neilsconcretecutting.comwww.neilsconcretecutting.comServices: FS, CD, WL, SD, CC
Penhall Company - Salt Lake City Joe Ebert2449 S Constitution BlvdWest Valley City, UT 84119Tel: 801-355-7364Email: [email protected]: FS, CD, WL, WR, SD, CC
Saw Jockey Chance EwingPO Box 711967Salt Lake City, UT 84171Tel: 801-455-9333Email: [email protected]: FS, CD, WL, WR, SD, CC
Walsh Concrete Cutting Specialists Mike Walsh1482 Industrial RdSalt Lake City, UT 84104Tel: 801-975-6400Email: [email protected]: FS, CD, WL, WR, SD
Virginia
Blake Construction of VA, Inc. Brian Blake2217 Shenandoah Ave NWRoanoke, VA 24017Tel: 540-342-7203Email: [email protected]: FS, CD, WL, SD, GPR
Penhall Company - Richmond Carl Golden1821 Ruffin Mill CirColonial Heights, VA 23834Tel: 804-520-1260Email: [email protected]: FS, CD, WL, WR, SD, CC
Penhall Company - Washington DC Bill Moore8532 Terminal Rd # TLorton, VA 22079Tel: 919-859-9911Email: [email protected]: FS, CD, WL, WR, SD, CC
Swank Construction Co., LLC Dick Logsdon539 London Bridge RdVirginia Beach, VA 23454Tel: 757-200-7505Email: [email protected]: FS, CD, WL, WR, SD
Washington
Accurate Concrete Cutting, Inc. Vern Balkowitsch, Sr.PO Box 5798Vancouver, WA 98668Tel: 360-694-8564Email: mary@accurate-concrete-cut.comwww.accurate-concrete-cut.comServices: FS, CD, WL, WR, SD, CC
A-Line Concrete Cutting, LLC Travis BerryPO Box 6219Vancouver, WA 98668Tel: 503-227-2580Email: [email protected]: FS, CD, WL, WR, SD, CC
Arbor Heights Concrete Core Drilling, LLC Jesse C. Dean2645 SW 110th StSeattle, WA 98146Tel: 206-909-8266Email: [email protected]
Cascade Concrete Sawing & Drilling Dick Olsen27500 16th Ave SFederal Way, WA 98003Tel: 253-872-7578Email: dick@cascadeconcretesawing.comwww.cascadeconcretesawing.comServices: FS, CD, WL, WR, SD, CC, GPR
Cascade Concrete Sawing & Drilling Jeff Lawson15022 35th Ave W Ste BLynnwood, WA 98087Tel: 206-542-9494www.cascadeconcretesawing.comServices: FS, CD, WL, WR, SD, CC, GPR
Evergreen Concrete Cutting Matt Taylor767 Valentine Ave SEPacific, WA 98047Tel: 800-480-1494Email: matt@evergreenconcretecutting.comwww.evergreenconcretecutting.com
Interstate Sawing & Drilling, LLC David Desserault2455 Beaudry RdMoxee, WA 98936Tel: 509-834-2044Email: [email protected]: FS, CD, WL, SD, CC
National Concrete Cutting, Inc. Matthew Finnigan7715 Pacific Highway EastMilton, WA 98354Tel: 800-551-0511Email: matthewf@nationalconcretecuttinginc.comwww.nationalconcretecuttinginc.comServices: FS, CD, WL, SD, CC
Penhall Company - Seattle Scott Galloway11001 E Marginal Way STukwila, WA 98168Tel: 206-763-9200Email: [email protected]: FS, CD, WL, WR, SD, CC
Salinas Sawing & Sealing, Inc. Tracy Campbell7804 40th Ave WMukilteo, WA 98275Tel: 425-745-0706Email: [email protected]: FS, CD, WL, SD
Talisman Construction Services, Inc. Jessant T. SpencerPO Box 6189Spokane, WA 99217Tel: 509-487-1292Email: [email protected]: CD, WL, WR, SD
Wisconsin
Central Concrete Cutting, Inc. Jack Sondergard1021 Starr AveEau Claire, WI 54703Tel: 888-729-4642Email: [email protected]: FS, CD, WL, WR, SD
Central Concrete Cutting, Inc. Jack SondergardW719 Leroy StEdgar, WI 54426Tel: 715-352-2552Email: [email protected]: FS, CD, WL, WR, SD
Con-Cor Company, Inc. Karen Ann PolzerW146N5790 Enterprise AveMenomonee Falls, WI 53051Tel: 262-781-3660Email: [email protected]: FS, CD, WL, WR, SD, CC
north american contractors
SERVICES: Flat Sawing (FS), Core Drilling (CD), Wall Sawing (WL), Wire Sawing (WR), Selective Demolition (SD), Curb Cutting (CC), Ground Penetrating Radar (GPR), Concrete Polishing (CP)
| 212013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
Concrete Sawing Services Co. Paul Konkler911 Ogden AveSuperior, WI 54880Tel: 715-392-2463Email: [email protected]: FS, CD, WL, WR, CC
Hard Rock Sawing & Drilling Specialist Co. Mary DvoratchekPO Box 718Keshena, WI 54135Tel: 715-799-3823Email: [email protected]: FS, CD, WL, WR, SD, CC
Interstate Sawing Company, Inc. Duke Long7403 Sleepy Hollow RdWest Bend, WI 53090Tel: 262-334-7522Email: [email protected]: FS, CD, WL, WR, SD, CC
Interstate Sealant & Concrete, Inc. Cheryl SmentS40W24211 Rockwood WayWaukesha, WI 53189Tel: 262-547-6316Email: [email protected]
Wyoming
Concrete Saw & Core, Inc. Matthew Ackerman109 E 17th St Ste 4143Cheyenne, WY 82001Tel: 307-778-0880Email: [email protected]: FS, CD, WL, WR, SD
CANADA
Alberta
A-1 Concrete Cutting & Coring Ltd.Robert Skolly4949 Hubalta Rd SECalgary AB T2B [email protected]
Doncore Concrete Cutting & Coring Ltd. Don ColbournePO Box 50112 RPO MarlboroughCalgary, AB T2A 7P1CANADATel: 403-312-3424Email: [email protected]: FS, CD, WL, SD, CC
Road Savers Western Ltd. Ian Cousins9620 36 St NECalgary, AB T3J 4E3CANADATel: 403-590-2525Email: [email protected]: FS, CD, WL, CC, GPR
Supreme Concrete Cutting & Drilling Reno Trentini11511 160 St NWEdmonton, AB T5M 3V9CANADATel: 780-489-0151Email: [email protected]
Walser Contracting Ltd. Michael Podolak14516 86 Ave NWEdmonton, AB T5R 4B6CANADATel: 780-721-3405Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Yellowhead Coring & Cutting, Ltd. Ian McGill410 68 StEdson, AB T7E 1M7CANADATel: 780-723-5282Email: [email protected]: FS, CD, WL, WR, SD
British Columbia
Amec Contracting Ltd. Ante Curkovic7406 Conway AveBurnaby, BC V5E 2P8CANADATel: 604-438-4413Email: [email protected]
Canadian Cutting & Coring Ltd.John Van Dyk3999 2nd AveBurnaby BC V5C 3W9CANADAPhone: [email protected]
Cancor Cutting & Coring Ltd. Rory Le BrocqPO Box 550Errington, BC V0R 1V0CANADATel: 604-250-8252Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Nuwest Concrete Cutting & Coring Grant Gettling227 St. Patrick StNew Westminster, BC V3L 1P9CANADATel: 604-525-6145Email: [email protected]
Pacific Blasting & Demolition Ltd. Tom Bagaric3183 Norland AveBurnaby, BC V5B 3A9CANADATel: 604-291-1255Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Westcoast Cutting & Coring Ltd.Brien Wnuk903 Sherwood AveCoquitlam BC V3K 1A7CANADA604-291-1448westcoastcutting@telus.netwww.westcoastcutting.ca
Westcoast Scanning Ltd.Rachel Monette903 Sherwood AveCoquitlam BC V3K 1A7CANADA604-219-0375rachelm@westcoastscanning.cawww.westcoastscanning.ca
Manitoba
Di-Tech International, Inc. Ted Johnston1864 Springfield Rd Box 4 Grp 525 RR 5Winnipeg, MB R2C 2Z2CANADATel: 204-222-7400Email: [email protected]: FS, CD, WL, WR, SD, CC. GPR
New Brunswick
A & R Concrete Drilling & Sawing Ltd. Rob GatesPO Box 27057 100 Sunset DriveSaint John, NB E2M 5S8CANADATel: 506-642-2011Email: [email protected]
north american contractors
SERVICES: Flat Sawing (FS), Core Drilling (CD), Wall Sawing (WL), Wire Sawing (WR), Selective Demolition (SD), Curb Cutting (CC), Ground Penetrating Radar (GPR), Concrete Polishing (CP)
22 | The AssociATion of cuTTing ProfessionAls • www.csda.org
Nova Scotia
MacIsaac Drilling Limited John MacIsaac191 Silver Birch DrHubley, NS B3Z 1A8CANADATel: 902-876-2258Email: [email protected]: FS, CD, WL, SD, CC, GPR
Ontario
Advance Cutting & Coring Ltd. Stephane Campeau1308 Leeds AveOttawa, ON K1B 3W3CANADATel: 613-741-7561Email: [email protected] cutting.caServices: FS, CD, WL, WR, SD, CC
All Trades Contracting Reg Galbraith404-1100 Memorial AveThunder Bay, ON P7B 4A3CANADATel: 807-626-2220Email: [email protected]: FS, CD, WL, SD
Basic Concrete Cutting, Inc. Jim Sterioff6101 Netherhart Rd Unit 10Mississauga, ON L5T 1G5CANADATel: 905-670-8142Email: [email protected]: FS, CD, WL
Capital Cutting & Coring Ltd. Mike Vezina48-2627 Edinburgh PlaceOttawa, ON K1B 5M1CANADATel: 613-737-5227Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR, P
D & D Diamond Cutting and Coring Doug Buiter42076 Hwy 3 RR 3Wainfleet, ON L0S 1V0CANADATel: 905-899-1998Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Facca Construction, Inc. Don Gardonio2097 County Rd 31 RR 1Ruscom Station, ON N0R 1R0CANADATel: 519-975-0377Email: [email protected]: FS, CD, WL, SD
Ontario Cutting & Coring Limited Tony Zapparoli2398 Haines Rd Unit IMississauga, ON L4Y 1Y6CANADATel: 905-279-2660Email: sales@ontariocuttingandcoring.comwww.ontariocuttingandcoring.comServices: FS, CD, WL, WR
Penhall Company/The Graff Company Toronto John MacDonald35 Precision RdEtobicoke, ON M9W 5H3CANADATel: 905-457-8120Email: [email protected]: FS, CD, WL, WR, SD, GPR
Quebec
Constech Jacques Parent, Jr.27 Millar StGatineau, QC J8Y 3N8CANADATel: 613-868-3800Email: [email protected]: CD
Saskatchewan
Helgason Contracting Patrick HelgasonSite 27 Box 1 RR 5 Stn MPPPrince Albert, SK S6V 5R3CANADATel: 306-763-4824
Neskor Cutting and Coring ServicesRyan Korness1624 33rd St WSaskatoon SK S7L [email protected]
Puerto Rico
TIANCO INC. David TiradoLomas Verdes Ave 1C-14B, PMB 119Bayamon, PR 00956Tel: 787-361-8185Email: [email protected]
concrete polishingnorth american contractors
Color Surface Cameron Honey2416 W Honey LaneFayetteville, AR 72704Tel: 479-283-6062Email: [email protected]: CP
Color Surface Robert Fruland768 Lanni CtHenderson, NV 89012Tel: 702-303-7149Email: [email protected]: CP
SERVICES: Flat Sawing (FS), Core Drilling (CD), Wall Sawing (WL), Wire Sawing (WR), Selective Demolition (SD), Curb Cutting (CC), Ground Penetrating Radar (GPR), Concrete Polishing (CP)
gpr contractors
Hard Rock Technologies, Inc. Emily Hammer200 South PkwyProspect Heights, IL 60070Tel: 847-275-4007Email: emily@hardrocktechnologies.comwww.hardrocktechnologies.comServices: GPR
National GPR Service, Inc. Jared Lampe1301 Larc Industrial BlvdBurnsville, MN 55337Tel: 877-556-4777Email: [email protected]: GPR
Structure Scan, Inc. Tony Brunette1864 Springfield Rd Box 4 Grp 525 RR 5Winnipeg, MB R2C 2Z2CANADATel: 204-777-6590Email: [email protected]: GPR
| 232013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
overseas contractors
Australia
Auscut Concrete Cutting & Drilling Ray Thomson18 McLennan DrKensington VIC 3031AUSTRALIATel: 61-3 9326 5800Email: [email protected]: FS, CD, WL, WR, SD, CC
Conquest Cutting & Drilling Pty Ltd. Anthony PercyPO Box 180Mitcham VIC 3132AUSTRALIATel: 61-3 9879 1918Email: [email protected]
Fast Cut Qld Pty. Ltd. Rex Scoles91 Basalt StGeebung QLD 4034 AUSTRALIATel: 61-7 3265 6537Email: [email protected]
National Contracting Pty. Ltd.David WilliamsPO Box 184Happy Valley SA 5159AUSTRALIATel: 61-8 8383 7500Email: [email protected]
Online Concrete Cutting Services Pty. Ltd. Steven WyldeUnit 1, 4 Prince William DrSeven Hills NSW 22147 AUSTRALIATel: 61-2 9620 5555Email: [email protected]: FS, CD, WL, WR
OzCut Concrete Cutting Services Robert RiggsUnit 5, 9-12 Lambridge PlacePenrith NSW 2750AUSTRALIATel: 61-2 4729 0061Email: [email protected]
Qld Concrete Drilling & Sawing Pty Ltd. Catherine ThomsonPO Box 902Archerfield QLD 4108AUSTRALIATel: 61-7 3274 3803Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Super City Concrete Cutting P/L Alan TorrancePO Box 3022Darwin NT 0801AUSTRALIATel: 61-8 8941 5833Email: [email protected]: FS, CD, WL, WR, SD, CC
Super City Concrete Cutting P/L Jason FrankenPO Box 302Ocean Grove VIC 3226AUSTRALIATel: 61-3 5248 8009Email: [email protected]: FS, CD, WL, WR, SD, CC
Brazil
EKIPE-C Federico del VillarRua Prof. Clemente Pinho, 182Sao Paulo-SP 04753-165BRAZILTel: 55-11 2884 4900Email: [email protected]: FS, CD, WL, WR
Furofix Engenharia Ltda. Marcio TeodoroRua Camelias 79Belo Horizonte, Minas Gerais 30410-380BRAZILTel: 55-31 3372 1816Email: [email protected]: FS, CD, WL, WR
Bulgaria
Nova Engineering Ltd. Vladimir Petrovul./str. Peyo Yavorov #1, Business Center “Ogosta” Office 306Montana BG-3400BULGARIATel: 359-8 7896 5838Email: [email protected]: FS, CD, WL, SD
Germany
Bohrtechnik Westerwald GmbH Rupert MarkoIm Churfeld 13-1556424 MoschheimGERMANYTel: 49-26 0269 074Email: marko@bohrtechnik-westerwald.dewww.bohrtechnik-westerwald.deServices: FS, CD, WL, WR, SD
Hong Kong
Concrete Coring Company of Hong Kong, Ltd. John D. Stallman99-1026 Iwaena StAiea, HI 96701Tel: 808-239-5539Email: [email protected]: SD
Modern Concrete Drill Cut Co., Ltd. Bi Bi Wong Sze ChaiFlat B, 7/F, Ray Centre, 88 Hung To RoadKwun Tong, KowloonHONG KONGTel: 852-2342 9622Email: [email protected]
India
Anuwrita Services Pvt. Ltd. Rahul A. Chawan1, Sharda Kutir, Dr Ambedker RoadMuland (W), Mumbai 400080 INDIATel: 91-22 2569 3708Email: [email protected]: FS, CD, WL, WR, SD
Sai Retrofabs Anand Gopalakrishan Ramakrishnan393, 28th Main, 1st Sector HSR LayoutBangalore 560102INDIATel: 91-98 4543 3300Email: [email protected]: FS, CD, WL, WR
Italy
Tondin srl Tiziano TondinVia dell’ Artigianato, 135010 Grantorto (PD) ITALYTel: 39-04 9949 0465Email: [email protected]
24 | The AssociATion of cuTTing ProfessionAls • www.csda.org
overseas contractors
Japan
Concrete Coring Company, Ltd. Jun Ozawa15-30, Sekimachiminami, 3-ChomeNerimaku, TokyoJAPANTel: 81-3 3928 3023Services: CD, WL, WR
Dai-Ichi Cutter Kogyo K.K.Yasushi Koike833 Hagisono, Chigasaki – ShiKanagawa-Ken 253-0071JAPAN81-4 6785 [email protected]
New Zealand
A1 Kiwi Cutters & Drillers Ltd. Penny SimonsPO Box 90981, Victoria Street WestAuckland 1142 NEW ZEALANDTel: 64-9 420 3386Email: [email protected]: FS, CD, WL, WR, CC
Cut ‘n Drill Concrete Services Limited Graeme ParrPO Box 5, PatumahoeAuckland 2344NEW ZEALANDTel: 64-9 0274 844112Email: [email protected]: FS, CD, WL, WR, SD, CC
Lowery Supa Cutters Limited John LoweryPO Box 301777Albany, Auckland 0752 NEW ZEALANDTel: 64-9 414 5050Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Panama
Marine Metal Coatings, Inc. Harmodio Yuen, Jr.PO Box 0832-0733PanamaPANAMATel: 507-317-6535Email: [email protected]
Russia
CJSCEvgeniy ShkedovBuilding 22, Pcrovskaya Str., 1Moscow [email protected]
South Africa
AMFRA Maintenance Services cc Frans PrinslooPO Box 102128Meerensee, KwaZulu Natal 3901SOUTH AFRICATel: 27-35 751 1900Email: [email protected]: FS, CD, WL, WR, SD
Holmes Sawing & Drilling Andrew Holmes22 Nipper RoadNew Germany, KZN 3620 SOUTH AFRICATel: 27-3 1705 1411Email: [email protected]: FS, CD, WL, WR, SD, GPR
Q & A Coring Cutting & Sealing Henry DippenaarPO Box 2074Parys 9585SOUTH AFRICATel: 27-5 6817 7663Email: [email protected]
T & K Lifts cc Kenneth CarpenterPO Box 2348 SouthdaleJohannesburg, Gauteng 2135SOUTH AFRICATel: 27-11 942 1306Email: [email protected]
Trinidad & Tobago
B.T. Rentals Limited Bret Talma#13 Buller StreetWoodbrookTRINIDAD & TOBAGOTel: 868-628-2703Email: [email protected]: FS, CD, SD
United Arab Emirates
BT Patel Co. LLC Chandresh ParekhRas Al Khor Industrial Area, AwirDubai 88185UNITED ARAB EMIRATESTel: 971-4 320 5668Email: [email protected]
Celtic Coring, LLC Liam WynneAl Khabaisi Building, 1st Floor Office No. 105-7, Port Saeed Road DeiraDubaiUNITED ARAB EMIRATESTel: 971-5 677 92332Email: [email protected]
United Kingdom
Core Cut Ltd. Finlay CrockerBankhead, Greendykes RoadBroxburn, West Lothian EH52 6PPUNITED KINGDOMTel: 44-15 0685 4710Email: [email protected]: FS, CD, WL, WR, SD
D-Drill Master Drillers Ltd. Julie WhiteShilton Industrial Estate, Bulkington RoadShilton, Coventry, Warwickshire CV7 9QLUNITED KINGDOMTel: 44-24 7661 2858Email: [email protected]: www.d-drill.co.uk
Holemasters Scotland Limited James McArthur114 Main Street, ChapelhallAirdrie, Lanarkshire ML6 8SBUNITED KINGDOMTel: 44-845 467 1500Email: jim.mcarthur@holemasters-scotland.co.ukwww.holemasters-scotland.co.uk
Kilnbridge Construction Services Limited John DevinMcDermott House, Cody Rd Business ParkSouth Crescent, London E16 4TLUNITED KINGDOMTel: 44-20 7511 1888Email: [email protected]: FS, CD, WL, WR, SD, CC, GPR
Technical Concrete Cutting Ltd. Nigel Ostler-HarrisGreenlands House, Southbrook Road, West AshlingChichester, West Sussex PO18 8DNUNITED KINGDOMTel: 44-12 4357 2784Email: office@technicalconcretecutting.co.ukwww.technicalconcretecutting.co.ukServices: FS, CD, WL, WR, SD
| 252013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
manufacturers
Archer USA / Dexpan USA Yan An2031 Appaloosa DriveSunland Park, NM 88063Tel: 575-874-9188Email: [email protected]
Concut, Inc. Tom Monaghan6815 S 220th StKent, WA 98032Tel: 253-872-3507Email: [email protected]
CS Unitec, Inc. Thomas Carroll22 Harbor AveNorwalk, CT 06850Tel: 800-700-5919Email: [email protected]
Cyclone Diamond Products Ltd. Diane Webb107-2845 23 St NECalgary, AB T2E 7A4CANADATel: 403-250-5568Email: [email protected]
Cyclone Diamond Products, Ltd. Ivan Luketic7973 Enterprise StBurnaby, BC V5A 1V5CANADATel: 604-879-2424Email: [email protected]
Diamond Products Jeff Nelson5578 E La Palma AveAnaheim, CA 92807Tel: 306-618-2606Email: [email protected]
Diamond Products Greg Lipscomb700 Westlake Pkwy Ste 760Atlanta, GA 30336Tel: 877-472-2930Email: [email protected]
Diamond Products Larry Liddle1121 SW 28th StBlue Springs, MO 64015Tel: 816-220-1385Email: [email protected]
Diamond Products Canada Rae Hudson6-335 Admiral BlvdMississauga, ON L5T 2N2CANADATel: 905-565-1355Fax: 905-565-9756Email: [email protected]
Diamond Products Limited Larry Liddle333 Prospect StElyria, OH 44035Tel: 440-323-4616Email: [email protected]
Diamond Systems, Inc. Don Graff39 Hale RdBrampton, ON L6W 3J9CANADATel: 800-387-2513Email: [email protected]
Diamond Tech, IncSean Ward4355 Pacific St.Rocklin, CA 95677Phone: [email protected]
Diamond Tools Technology Roger Allen723 Hastings LnBuffalo Grove, IL 60089Tel: 877-345-6DTTEmail: [email protected]
Diamond Vantage, Inc. Jeff Shermo2025 Alton PkwyIrvine, CA 92606Tel: 866-322-4078Email: [email protected]
Disco Abrasive America, Inc. Kyle Baek2320 E Artesia BlvdLong Beach, CA 90805Tel: 562-984-2600Email: [email protected]
DITEQ Corporation Mike Orzechowski1250 NW Main StLee’s Summit, MO 64086Tel: 866-688-1032Email: [email protected]
Dixie Diamond Manufacturing Sid Kilgore205 Buxton CtLilburn, GA 30047Tel: 770-921-2464Email: [email protected]
DP Grooving & Grinding Div. Todd Thompson1155 Post RdOakdale, CA 95361Tel: 800-225-0142Email: [email protected]
EDCO-Equipment Development Co., Inc. Rich Quickel100 Thomas Johnson DrFrederick, MD 21702Tel: 800-638-3326Email: [email protected]
GDM Technologies Jennifer Speece1910 S Fremont DrSalt Lake City, UT 84104Tel: 805-964-4219Email: [email protected]
Hilti, Inc. Steve Garrison6601 Darin WayCypress, CA 90630Tel: 714-230-7410Email: [email protected]
Hilti, Inc. Jeremy Martin5400 S 122nd East AveTulsa, OK 74146Tel: 918-872-3080Email: [email protected]
Hoffman Diamond Products Frank Villella121 Cedar StPunxsutawney, PA 15767Tel: 814-938-7600Email: [email protected]
Husqvarna Construction Products N.A. Ron Rapper17400 W 119th StOlathe, KS 66061Tel: 913-928-1007Email: [email protected]
26 | The AssociATion of cuTTing ProfessionAls • www.csda.org
manufacturers
ICS, Blount Inc. Kevin Warnecke4909 SE International WayPortland, OR 97222Tel: 503-709-1658Email: [email protected]
K2 Diamond Mike Nelson23911 Garnier St Ste CTorrance, CA 90505Tel: 310-539-6116Email: [email protected]
Kotkurb Equipement, Inc. Alex Bertrand-Thouin760 Rue RossiterSt-Jean-S-Ric, QC J3B 8J1CANADATel: 450-359-4040Email: [email protected]
Merit Engineering & Equipment Co Rita Vigil-FergusonPO Box 10215Santa Ana, CA 92711Tel: 928-771-0575Email: [email protected]
Multiquip / Sanders Christopher Priest2470 Conestoga AveHoney Brook, PA 19344Tel: 310-850-5483Email: [email protected]
Norton Pro Diamond Steve Anderson1345 S Acacia AveFullerton, CA 92631Tel: 714-776-6101Email: [email protected]
Patriot Diamond, Inc. Richard Rice2631 E Oakland Park Blvd Ste 109Ft. Lauderdale, FL 33306Tel: 954-563-8294Email: [email protected]
Pentruder, Inc. Terry Martin6501 W Frye Rd, Ste 14Chandler, AZ 85226Tel: 562-445-6429Email: [email protected]
PrimeSource Building Products Kyle Thuenemann1321 Greenway DrIrving, TX 75038Tel: 972-999-8631Email: [email protected]
Protech Diamond Tools, Inc. David Youwei Liao2-4639 6 St NECalgary, AB T2E 3Z6CANADATel: 403-230-8826Email: [email protected]
Protech Diamond USA, Inc. Gordon Ferries-Scott7312 Alondra BlvdParamount, CA 90723Tel: 562-817-5642Email: [email protected]
Quanzhou Zhongzhi Diamond Tool Co., Ltd. Tyler KangWan’an Industrial Zone, Luojiang QuanzhouQuanzhou, Fujian 362000, CHINATel: 86-595-22635005Email: [email protected]
RGC / Reimann & Georger Corp. Mark Bossert1849 Harlem RdBuffalo, NY 14212Tel: 800-742-8665Email: [email protected]
Shibuya Company, Ltd. Norikazu Shibuya5-86, Mokuzaiko-kitaHatsukaichi, Hiroshima 738-0021JAPANTel: 81-8 2934 4510Email: [email protected]
SpiderCut Systems, LLCRoger Drissel812 Brookview AveBurlington, WI [email protected]
Stihl, Inc. Daniel Pherson536 Viking DrVirginia Beach, VA 23452Tel: 757-486-9212Email: [email protected]
Terra Diamond Industrial Judith O’Day1910 S Fremont DrSalt Lake City, UT 84104Tel: 801-977-0054Email: [email protected]
Toolgal USA Industrial Corp. David Ginzburg283-A Tribble StElberton, GA 30635Tel: 706-283-9556Email: [email protected]
Wolverine Equipment Bill Darling6815 S 220th StKent, WA 98032Tel: 253-867-6209Email: [email protected]
| 272013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
distributors affiliates
Ace Cutting Equipment & Supply, Inc. Ron Measel25806 Novi RdNovi, MI 48375Tel: 248-449-4944Email: [email protected]
Brokk, Inc. Peter Bigwood1144 Village WayMonroe, WA 98272Tel: 877-BROKK-ITEmail: [email protected]/us
Diamond Blade Warehouse Joe Russo588 Lakeview PkwyVernon Hills, IL 60061Tel: 800-325-2337Email: [email protected]
Diamond Blade Warehouse Jon Hartmann588 Lakeview PkwyVernon Hills, IL 60061Tel: 800-325-2337Email: [email protected]
Diteq Tools (M) Sdn. Bhd.Alan TanNo.35, Jalan 3/108C, Taman Sungai Besi57100 Kuala LumpurMALAYSIATel: 603-7987 8770Email: [email protected]
Esch Construction Supply, Inc. Dan Esch561 Phalen BlvdSt. Paul, MN 55130Tel: 651-487-1880Email: [email protected]
Glacier Diamond, Inc. Jeff Hayden4410 E La Palma AveAnaheim, CA 92807Tel: 714-854-9600Email: [email protected]
ProContractor Supply, Inc. Mark Clements3917 Old Flowery Branch RdOakwood, GA 30566Tel: 770-287-8555Email: [email protected]
V-Belt Global Supply Dan Eppinga1401 W. Bailey St.Sioux Falls, SD 57104Tel: 888-291-5450Email: [email protected]
Anzeve Antonio ZeroloDiego Marín Aguilera, 4 Parque Tecnológico de Leganés28918 Leganés (Madrid), SPAINTel: 34-9 1633 4553Email: [email protected]
Apollo General Insurance Agency, Inc. Robert C. Elster, Jr.389 4th St ESonoma, CA 95476Tel: 707-996-2912 x17Email: [email protected]
ATS Machine & Tool Co., Inc. Robert Dutko7750 Division DrMentor, OH 44060Tel: 440-255-1120Email: [email protected], www.seg-die.com
Business Networks Les CunninghamPO Box 175Walterville, OR 97489Tel: 800-525-1009Email: [email protected]
Carmenita Truck CenterPartick O’Brien13443 E Freeway DrSanta Fe Springs, CA [email protected]
CentralPoint Solutions, LLC Jay Shaver13218 S 5700 WHerriman, UT 84096Tel: 801-232-9768Email: [email protected]
Company Wrench Brad Hutchinson4805 Scooby LnCarroll, OH 43112Tel: 740-654-5304Email: [email protected]
Construction Solutions, LLC Rick Norland24564 Lackman RdPaola, KS 66071Tel: 913-879-2200Email: rnorland@construction-solutions.comwww.construction-solutions.com
Diamond Innovations, Inc. Martin Deakins6325 Huntley RdWorthington, OH 43085Tel: 614-438-2000Email: [email protected]
Di-Tech Restoration, Inc. Tom DwyerPO Box 4 GRP 525 RR 5 STN TransconaWinnipeg, MB R2C 2Z2CANADATel: 204-777-6582Email: [email protected]
Dr. Fritsch Sondermaschinen GmbH Volker WornDieselstrasse 8D-70736 Fellbach GERMANYTel: 49-711 518 320Email: [email protected]
Expert Equipment Company Markus Bartl7201 Wynnpark DrHouston, TX 77008Tel: 713-797-9886Email: [email protected]
GelMaxx Skip Edwards9437 Wheatland CourtSantee, CA 92071Tel: 855-322-3335Email: [email protected]
GMI Engineered Products Gail Bowman3600 Township Rd 27Bluffton, OH 45817Tel: 419-408-5906Email: [email protected]
Grabber Power Products, ACC Jorge Garcia226 S Price RdTempe, AZ 85281Tel: 480-967-2545Email: [email protected]
GSSI, Inc. Matt Dragon12 Industrial WaySalem, NH 03079Tel: 800-524-3011Email: [email protected]
28 | The AssociATion of cuTTing ProfessionAls • www.csda.org
affiliates
Hicycle Motor Manufacturing, Inc. Larry “Ty” Goodwin29115 S Hult RdColton, OR 97017Tel: 503-824-6119Email: [email protected]
Holer Diamond Tools Phil HolerPO Box 3464, 65 Main RoadRichmond, Nelson 7050 NEW ZEALANDTel: 64-3 543 9750Email: [email protected]
Hylant GroupKristen Long150 N Wacker Dr Ste 1500Chicago, IL 60606Tel: 312-283-1322Email: [email protected]: www.hylant.com
Keeling Group Frank Keeling14204 Benson StOverland Park, KS 66221Tel: 913-544-4485Email: [email protected]
LIUNA Local 506 Training Centre Ted Gedney1600 Major Mackenzie Dr ERichmond Hill, ON L4S 1P4CANADATel: 905-883-4268Email: [email protected]
Mala Geoscience USA, Inc. Matthew J. Wolf465 Deanna LnCharleston, SC 29492Tel: 843-852-5021Email: [email protected]
McKay Lodge Conservation Lab, Inc. Robert G. Lodge10915 Pyle South Amherst RdOberlin, OH 44074Tel: 440-774-4215Email: [email protected]
National Research Company Wilson Born55911 Gratiot AveChesterfield, MI 48051Tel: 586-749-0100Email: [email protected]
O’Brien International Patrick O’Brien13577 Feather Sound Dr Ste 560Clearwater, FL 33762Tel: 727-577-5002Email: [email protected]
Peak Software Systems, Inc. Charles Warrell45 W 9000 S Ste 2Sandy, UT 84070Tel: 801-572-3570Email: [email protected]/dsm
Prism Corporation Terry Fenelon1251 Arundel StSt. Paul, MN 55117Tel: 651-488-4250Email: [email protected]
Riways Technologies William LeePO Box 2264Menlo Park, CA 94025Tel: 650-400-7500Email: [email protected]
Robert Bosch Tool Corporation Matt Van1800 W Central RdMount Prospect, IL 60056Tel: 224-232-2385Email: [email protected]
SIS, LLC Robert Black2949 Green Valley RdBirmingham, AL 35243Tel: 205-919-5946Email: [email protected]
Slurry Solutions a Division of Golz Mark Critchfield2101 W Broadway #164Columbia, MO 65203Tel: 573-219-7330Email: [email protected] / www.slurrysolutions.com
Traxx Construction Products Lloyd WilliamsUnit 4/1 Rocklea DrPort Melbourne VIC 3207AUSTRALIATel: 61-3 9646 9200Email: [email protected]
Vac-Tron Equipment LLC Don Buckner27137 South Highway 33Okahumpka, FL 34762Tel: 352-728-2222Email: [email protected]
Western Saw, Inc. Kevin Baron3200 Camino Del SolOxnard, CA 93030Tel: 805-981-0999Email: [email protected]
Widerman & Company Curt Dumbleton70 Tanner StHaddonfield, NJ 08033Tel: 856-428-0939Email: [email protected]
Yardstick Software Greg Kureluk200-8616 51 Ave NWEdmonton, AB T6E 6E6CANADATel: 780-409-5606Fax: 780-409-9138Email: [email protected]
| 292013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
reciprocal associations
Aideco Dr. Ing. Andrea SchiattiViale Misurata 3220146 Milano (MI) ITALYTel: 39-02 423 7119Email: [email protected]
American Society of Concrete Contractors Bev Garnant2025 S Brentwood Blvd Ste 105St. Louis, MO 63144Tel: 314-962-0210Email: [email protected]
CDSDMA John McKibbonTel: 905-840-1150Fax: 905-840-1620Email: [email protected]
Concrete Sawing & Drilling Association Australia Jason Franken20 Queens RoadMelbourne VIC 8004 AUSTRALIATel: 61-3 9867 0221Email: [email protected]
Drilling & Sawing Association Ltd. Joel VinsantUnit 3 Brand Street, Off Meadow LaneNottingham, NG2 3GWUNITED KINGDOMTel: 44-84 4879 3452Email: [email protected]
Fachverband Betonbohren und-Sagen Hans-Georg WagenerGrosse Allee 6034454 Bad Arolsen GERMANYTel: 49-56 9175 98Email: info@fachverband-bohren-saegen.dewww.fachverband-bohren-saegen.de
Florida Independent Concrete & Associated Products Michele Stropoli116 W Greentree LnLake Mary, FL 32746Tel: 407-333-4694Email: [email protected]
Håltagnings Entreprenörerna Carl BendeforsStorgatan 19, Box 5054SE-102 42 Stockholm, SWEDENTel: 46-8 698 5800Email: [email protected]
IACDS/IVBS Daniel TrachselOberdorfstr. 40/POBox 603CH-3053 Münchenbuchsee SWITZERLANDTel: 41-3 1858 2220Email: [email protected]
JCSDA Masanobu Takagi4-8-412, 1-Chome, GotandaShinagawa-Ku, Tokyo 141-0000 JAPANTel: 81-3 3490 3217Email: [email protected]/e_index.htm
National Demolition Association Michael R. Taylor, CAE16 N Franklin St Ste 203Doylestown, PA 18901Tel: 215-348-4949Email: [email protected]
NZ Concrete Sawing & Drilling Association Carol KennedyPO Box 302 486, North HarbourAuckland 0751 NEW ZEALANDTel: 64-9 442 426Email: [email protected]
Rabuso Comunicación, S.L./AEDT Jose BlancoAv. Rey Juan Carlos 92, P. 4, Of. 1028916 Leganés (Madrid) SPAINTel: 34-9 1277 2036Email: [email protected]
SMI / AEM Mark Benishek6737 W Washington St Ste 2400Milwaukee, WI 53214Tel: 414-274-0670Email: [email protected]
SVBS Willy AutenriedBahnhofstrasse 7d, Postfach 528CH-4512 Bellach/SO SWITZERLANDTel: 41-3 2618 1050Email: [email protected]
Tennessee Concrete Association Alan Sparkman705 Fort Negley CtNashville, TN 37203Tel: 615-360-7393Email: [email protected]
UTCA of NJ Michael DeVitoPO Box 728Allenwood, NJ 08720Tel: 732-292-4300Email: [email protected]
VBS - Austria Ingo HaemmerleRütte 40A-6840 Götzis AUSTRIATel: 43-5 5236 4267Email: [email protected]
30 | The AssociATion of cuTTing ProfessionAls • www.csda.org
Member BenefitsNetworking at the Annual Convention and Quarterly MeetingsThe number one benefit for members has always been the opportunity to network with cutting professionals at the annual convention and quarterly meetings. This networking provides opportunities to forge new relationships and learn from other experienced professionals.
CSDA Training and Certification ProgramsOver 3,000 members have graduated from more than 20 classroom, hands-on and online training programs. In addition, CSDA has certification programs for companies and individual operators. See pages 8 and 9 for more details.
CSDA Safety Resources and Toolbox Safety Tips (TSTs)The 230-page CSDA Safety Manual, CSDA 57-page Safety Handbook and five safety DVDs are designed specifically for concrete cutters and are available to members at a significant discount. TSTs can be used in employee safety meetings and can be an important part of your company’s safety program. CSDA has released a total of 100 TSTs since the program began. A new TST is released every month.
Representation with Governmental OrganizationsCSDA has an Alliance with OSHA to advance the safety of cutting contractors. This partnership included issuing Best Practice and Toolbox Safety Talk documents, joint exhibitions at trade shows, review of safety materials and round tables.
World of Concrete Co-SponsorMembers receive free registration and significant discounts on educational seminars fees. CSDA also supports the industry by exhibiting at this event and sponsoring seminar sessions.
Concrete OpeningsConcreteOpenings at www.concreteopenings.com is the only professional magazine dedicated to concrete cutting with a circulation of 17,000 per issue. Members can advertise at significant discounts and use the opportunity to have their job stories reach over 7,000 architects, engineers, general contractors and government officials.
CSDA Next Generation GroupThe group aims to continue the growth of the association while serving the needs and wants of the younger generation, with the goal of continuing to set a standard of excellence.
Mentor ProgramNew Members can receive personalized assistance from a current CSDA Board or Committee member during their first year of membership.
Market Intelligence• Helps you plan, measure, understand trends and markets. • 3rd party non biased market research• Surveys and reports
Other benefits and programs can be reviewed by visiting the CSDA Website at www.csda.org or call the CSDA office at 727-577-5004.
Discount ProgramsThe Association negotiates member benefit programs with national vendors in order to provide cost-savings opportunities for CSDA Members.
• staples• uPs freight• V-Belt
CSDA WebsiteThe CSDA Website at www.csda.org contains a wealth of information available 24/7 in the “Members” section. The online discussion boards also provide members a forum to discuss technical issues, sell equipment, hire employees or any other relevant topics.
| 312013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
Membership Applicationcompany information
COMPANY
ADDRESS
CITY STATE/PROVINCE
ZIP/POSTAL CODE COUNTRY
PHONE FAX
WEB ADDRESS
OFFICIAL REPRESENTATIVE
OTHERS PARTICIPATING IN CSDA ACTIVITIES
PRINCIPAL BUSINESS ACTIVITY
background information
START UP DATE YEARS IN BUSINESS
AVERAGE ANNUAL GROSS INCOME $
ANNUAL GROWTH RATE
NO. BRANCH LOCATIONS NO. EMPLOYEES
CONTRACTORS: NO. TRUCKS
PRINCIPALS/OWNERS OF BUSINESS
OTHER PROFESSIONAL ASSOCIATION MEMBERSHIPS
contractors only—CHECK BELOW TO IDENTIFY THE SERVICES YOU OFFER, WHICH WILL BE LISTED IN THE PRINT AND ONLINE DIRECTORIES:
FLAT SAWING CORE DRILLING WALL SAWING WIRE SAWING
SELECTIVE DEMOLITION CURB CUTTING GROUND PENETRATING RADAR
CONCRETE POLISHING SURFACE PREPARATION SLURRY RECYCLING
membership dues schedule please circle your dues amount
GROSS SALES NORTH AMERICAN CONTRACTOR POLISHING CONTRACTOR GPR IMAGING CONTRACTOR MANUFACTURER DISTRIBUTOR OVERSEAS CONTRACTOR AFFILIATE*
$0–1M $565 $750 $1,200 $875
$1–2M $920 $1,490 $1,120
$2–3M $1,390 $2,210 $1,655
$3M–5M $1,875 $1,250 $750
$3,565 $390
$695
$5–10M $2,355 $4,785 $2,670
>$10M $2,975 $5,945
COMPANY ANNUAL DUES (FROM ABOVE)
ADDITIONAL BRANCH LOCATIONS ($130 PER LOCATION)
CSDA WEBSITE HOTLINK ($100) links direCtly tO yOur COmpany website
CSDA • 13577 FEATHER SOUND DRIVE, SUITE 560, CLEARWATER, FL 33762 • TEL: 727.577.5004 • FAX: 727.577.5012 • E-MAIL: [email protected] • WWW.CSDA.ORG
*AFFILIATE: A person, firm, corporation, society, government agency or other organization providing services to the concrete sawing and drilling industry.
payment
$
$
$
$ANNUAL MEMBERSHIP TOTAL
CHECK ENCLOSED (US FUNDS AND DRAWN ON A US BANK) VISA MASTERCARD DISCOVER
CARD NO.
EXPIRATION DATE 3-DIGIT VERIFICATION (CSC)
NAME ON CARD
BILLING ADDRESS
SIGNATURE
membership dues
32 | The AssociATion of cuTTing ProfessionAls • www.csda.org
In addition to this printed Membership Directory, the CSDA Website includes a “Find a Member” search tool on its home page, where specifiers of concrete cutting can locate a professional CSDA contractor serving their area through an interactive map. Simply click on an individual state or area to be presented with a list of members from that state, or use the drop-down boxes to enter more specific search criteria. Results can be printed, including full contact details for each contractor, and a map is provided to show the exact geographical location of each company. Visit www.csda.org and click on the map icon to get started.
Find a Member Online
| 332013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
List of Topics*
A. SpecificationsCore Drilling CSDA-C-101Flat Sawing CSDA-F-102Track-Mounted Wall Sawing CSDA-W-104Wire Sawing CSDA-WS-106Hand Sawing CSDA-HS-108Chain Sawing CSDA-CS-109Diamond Blade CSDA-DB-112Polishing Concrete CSDA-PC-113
B. StandardsBlade Application Code for Diamond Saw Blades CSDA-BC-107Bolt Together Core Bits CSDA-BB-110Continuous Tube Threads CSDA-CT-111
C. TolerancesTolerances and Limits for Construction Drilling and SawingBasic Parameters for Concrete Drilling and Sawing Equipment
D. Best PracticesSlurry CSDA-BP-001Equipment Maintenance Management CSDA-BP-002Hazard Identification and Debris Removal CSDA-BP-003Introduction to Remote Control CSDA-BP-004Diamond Cutting Tools for ADA CSDA-BP-005Hydraulic Concrete Cutting Equipment CSDA-BP-006 Ground Penetrating Radar for Concrete Scanning CSDA-BP-007 Polished Concrete Floors CSDA-BP-008 Green Construction CSDA-BP-009 Hi-Cycle Concrete Cutting Equipment CSDA-BP-010Establishing and Maintaining the Work Area CSDA-BP-011Mechanical Anchors CSDA-BP-012Care of Quick Disconnect Flanges CSDA-BP-013
E. CSDA/OSHA Alliance Best PracticesHighway Work Zone Safety CSDA-OBP-1001Reducing Silica Exposure CSDA-OBP-1002Defensive Driving CSDA-OBP-1003 Electrical Safety CSDA-OBP-1004Scaffold Safety CSDA-OBP-1005Ladder Safety CSDA-OBP-1006Distracted Driving CSDA-OBP-1007Hearing Conservation CSDA-OBP-1008
Section 3: Resource Guide
* All of these documents are available online at CSDA.org.
34 | The AssociATion of cuTTing ProfessionAls • www.csda.org
Download the entire CSDA 2013–2014 Resource Guide today!Use the QR Code or Visit www.csda.org.
| 352013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory
SafetySawing and drilling are non-disruptive demolition methods that are vibration-free and allow for job completion with reduced noise, dust and debris. Professional sawing and drilling operators are committed to safety and follow appropriate cutting procedures.
Time SavingsSawing and drilling with diamond blades, core bits or wire saws are faster than comparable renovation or demolition methods. Professional cutting contractors have the knowledge to evaluate each unique job situation and determine the best approach. They are efficient and skilled, and they get the job done right the first time.
Cost Savings Diamond cutting systems provide significant cost advantages over conventional removal methods. These include increased productivity, reduced downtime and fewer operators needed to accomplish the job. Cutting professionals are well prepared to bring projects in on time and within budget.
Reduction of LiabilityGeneral contractors and other specifiers can reduce their liability by entrusting their sawing and drilling job to trained cutting professionals who are experts in their field. These professionals have the training and experience to select the best sawing and drilling procedures to employ at any stage of a project.
Seven Reasons to Specify Sawing and Drilling
Quality of WorkCutting contractors know which types and sizes of saw blades, drill bits and diamond wires are best for each application, and they have a good understanding of working clearance, disposal and other construction site issues. They create cuts to the dimensions required while overcoming challenges such as heavily reinforced concrete, confined spaces and time constraints.
Latest TechnologyModern, efficient cutting equipment can be used for a wide range of applications. The equipment provides large bulk removal capability while allowing for precision cuts and maintaining structural integrity. This equipment is also designed to create minimal disruption to the surrounding job site.
Access to CSDA ResourcesSpecifiers have access to professional CSDA sawing and drilling contractors, including those who have achieved Certified Operator status or have attained Level 1, 2 or 3 Company Certification by completing industry-specific certification programs.
Download the entire CSDA 2013–2014 Resource Guide today!Use the QR Code or Visit www.csda.org.
5
67
21
34
36 | The AssociATion of cuTTing ProfessionAls • www.csda.org
Architects, engineers, general contractors and government officials—virtually everyone who is involved in specifying sawing, drilling, pollishing, and imaging services in their daily work, have 24/7 online access to the Concrete Sawing & Drilling Association’s (CSDA) resource guides and specifications. Besides offering the Resource Guide as a printed document, CSDA also has this guide available electronically and free of charge at www.csda.org. The Resource Guide is just one of the tools that CSDA provides for specifiers. The Architect/Engineer Resources section on the home page of the CSDA Website includes a “Need a Contractor” feature, where specifiers can submit project details and request bids from CSDA contractors by completing of a simple online form. This area of the website also contains PDF versions of individual Standards, Specifications, Tolerances and Best Practices. In addition, each sawing and drilling job story published in Concrete Openings magazine can be downloaded for reference from the Techniques page of www.concreteopenings.com, where they are arranged by application.
Online Specifier Resources from CSDA
Concrete Sawing & Drilling Association13577 Feather Sound Drive, Suite 560
Clearwater, FL 33762Tel: 727-577-5004
www.csda.org
The Concrete Sawing & Drilling Association is a nonprofit trade association of contractors, manufacturers and affiliated members from the construction and renovation industry. Diamond tools for
projects requiring sawing, drilling, selective demolition, cutting and polishing offers the construction industry many benefits including
lower total project costs, precision cutting, maintenance of structural integrity, reduced downtime, reduced noise, dust and debris, limited
access cutting and the ability to cut heavily-reinforced concrete. Founded in 1972, CSDA has 500 member companies worldwide.
Concrete Sawing & Drilling Association13577 Feather Sound Drive, Suite 560
Clearwater, FL 33762Tel: 727-577-5004
www.csda.org
backcover.pdf 10 4/22/13 4:36 PM