2013 international conference on quality, reliability, risk, maintenance, and safety...
TRANSCRIPT
IEEE Catalog Number: ISBN:
CFP1374P-POD 978-1-4799-1015-1
2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE 2013)
Chengdu, China 15-18 July 2013
Pages 1-723
1/3
Table of Contents
I. Reliability Modeling and Risk Analysis
Research Trends in Automotive Functional Safety ..................................................................................................... 1
Azianti Ismail, Won Jung
Quality, Timeliness and Reliability in Software Medical Devices-Experience .......................................................... 5
Saraswathi Deora, Asavari Dandekar
Investigation on OMS/MP of Lower Weapon System ................................................................................................. 9
Kihoon Song, Youngman Park, Soonkook Hong, Seungsik Min, Sangyeol Kang, Jaewoo You, Choonghyun Choi
Application of API RBI Methodology on Stabilizer Tower in Natural Gas Plant .................................................. 15
M. M. El-Gammal, Ahmed El-Hewy, Saif-El Din
Risk Management Based on The Escalator Overturned Accident ........................................................................... 22
Wei Wang, Xuan Li, Qun-Li Pan
Reliability Quantitative Analysis for Rotor Vibration Based on WCFSE............................................................... 28
Wenzhong Tang,Chengwei Fei, Guangchen Bai, Shuang Ma
Verification of RiskA Calculation Engine Based on Open-PSA Platform............................................................... 32
Jin Wang, Liqin Hu, Shanqi Chen, Yanzhou Li, Fang Wang, Yican Wu, Wei Jia, FDS Team
The Model for Risk Identification Based on Systems Engineering .......................................................................... 36
Wei Wang, Jiaduo Wu, Dongyu Wang
A UML and XML Specification for Modeling of PMS.............................................................................................. 41
Xinyang Wu, Xiaoyue Wu
Reliability Analysis of Long-Wait-Short-Run Equipment Based on Gamma Process ........................................... 46
Jianjun Qi, Ping Jiang, Bo Guo, Dongfeng Wang
Reliability Modeling of Warm Standby Systems Subject to Fault Level Coverage Based on Multi-Valued
Decision Diagram .......................................................................................................................................................... 50
Qingqing Zhai, Jun Yang, Miaomiao Wang, Yusheng Qiu, Rui Peng
Failure Analysis and Ground Test Suggestion of Airship Propulsion System ........................................................ 54
Shengqi Chen, Bifeng Song, Haifeng Wang
Positioning Accuracy and Reliability of COMPASS for The Asia-Pacific Region ................................................. 60
Hangyu Huo, Xiaolin Zhang
Modeling of The Failure Principle of Complex Mechanical Systems by Using Timed Places Petri Nets ............. 66
Jianing Wu, Shaoze Yan
Invulnerability of Colored Networks: A Survey ........................................................................................................ 71
Quan Zhang, Hongzhong Deng, Mingmei Zhang, Fei Sha
Reliability Assessment of Products Based on Performance Degradation Data With Outliers Paper ................... 75
Jun Lu, Baowei Song, Zhaoyong Mao, Chunyang Cheng
Series System Failure Rate Modeling By Load-Strength Interference Analysis .................................................... 78
Liyang Xie, Yunpeng Gong
A Novel Dynamic Fault Tree Analysis Method .......................................................................................................... 81
Yan-Feng Li, Hong-Zhong Huang, Yu Liu, Shunpeng Zhu, Ning-Cong Xiao
Interval Physical Programming and Its Application to Evaluation of Soil State in Shield Tunneling ................. 85
Xu Zhang, Wei Sun, Junzhou Huo, Jingxiu Ling
Research on Reliability Analysis for Low-Altitude and High-Speed Payload Fairing Separation ....................... 90
Xuechang Zhu, Haoyuan Li, Tianxiang Yu, Bifeng Song
Reliability Modeling and Assessment of CNC Grinding Machine ........................................................................... 95
Yongjun Liu, Jinwei Fan, Yun Li
Aircraft Fuel Tank System Fire Disaster Analysis Based on FMEA and FTA ....................................................... 99
Chun-Bo Liu
Research on Reliability Index System of Truck Crane ........................................................................................... 103
Guangze Pan, Yufeng Sun, Weiwei Hu
A New Reliability Evaluation Method for Spaceflight Telemetry, Tracking and Control System ..................... 107
Jimin Lu, Xiaoyue Wu
A Comparison and Case Studies of Electronic Product Reliability Prediction Methods Based on Handbooks
...................................................................................................................................................................................... 112
Haowen Mou, Weiwei Hu, Yufeng Sun, Guangyan Zhao
O-Ring Static Sealing Reliability Model and Influence Factors Analysis ............................................................. 116
Wei Guo, Weimin Cui, Tianxiang Yu, Bifeng Song
Reliability Analysis of Satellite System With Cold-Standby Components Using Sequential Binary Decision
Diagrams ...................................................................................................................................................................... 122
Hang Zhou, Luping Gan, Debiao Meng, Yu liu, Hong-Zhong Huang
Reliability Improvement of Electric Power Steering System Based on ISO 26257 .............................................. 125
Xuewu Ji, Jingguang Ge, Hongliang Tian
Failure Mode Effect Analysis and Optimal Design of The Wing Structure .......................................................... 130
Jun-Hao Guo, Wei-Min Cui, Feng-Zhu Zheng, Hong-Juan Li
Accuracy Reliability Analysis of Power Servo Tool Holder ................................................................................... 134
Changyou Li, Nan Wu, Xiaochen Kang, Wenyuan Dai, Feilong Zhan
Bayesian Estimation of Products With Wiener Process Degradation Based on Linex Loss Function ............... 138
Bao-Wei Song, Wei-An Yan, Zhao-Yong Mao, Gui-Lin Duan
Research on Quantitative Risk Assessment Model and Failure Probability of Oil/Gas Pipeline Based on
Dempster-Shafer Evidence and Intuitionistic Fuzzy Theory .................................................................................. 145
Zhang Peng, Zhou Ying, Liao Tao
Estimation of Stress-Strength Reliability for A Class of Distribution Under Records ........................................ 151
Liang Wang, Qiang Zhang
Analysis on Reliability Model of High-Speed Emu Bogie System .......................................................................... 156
Hengliang Wang, Zhenggang Lu, Baoan Zhang
Reliability Assessment of Flue Gas Turbines Based on Fuzzy Fault Tree Analysis ............................................. 162
Lixiang Duan, Laibin Zhang, Jingjing Yue
CM-PMS Mission Performance Based on Fuzzy GERT ......................................................................................... 168
Yong Wu, Rui Kang, Lin Ma, Hongyu Hu
Research on Reliablity Analysis for Machine Tools ................................................................................................ 173
Zhaojun Yang, Chuanhai Chen, Guofa Li, Jili Wang, Xinhong Zhang
The Safety Evaluation of A Hook Combining Testing and Simulation ................................................................. 178
Jiaoyang Wang, Weimin Cui, Tianxiang Yu, Bifeng Song
Empirical Bayesian Estimation of Wiener Process With Integrated Degradation Data and Life Data ............. 183
Wei-An Yan, Baowei Song, Zhaoyong Mao, Guilin Duan
The Applicability of Static Sampling Techniques for Measuring The Application Reliability of The
Communication Networks in The Simulation Environment .................................................................................. 189
Xiaoxi Liu, Ruiying Li, Ning Huang
A Nuclear Power Plant Risk Monitor Based on Cloud Computing ....................................................................... 194
Fang Wang, Liqin Hu, Jin Wang, Yican Wu, Hongfei Liu, Yazhou Li, Wei Jia
Bayesian Parameter Estimation for Multi-State Components ............................................................................... 198
Peng Lin, Yu Liu, Xiaohu Zhang, Zhuhua Huang
Evaluating and Study on The Model of Missile Storage Reliability ....................................................................... 202
Lin Zhang, Xiaoming Han, Gang Feng
A Calculation Method for The Reliability of A Complex k-out-of-n System ........................................................ 204
Zeng-Zhu Chang, Guang-Yan Zhao, Yu-Feng Sun
Dynamic Reliability Analysis of Wind Power Gearbox Component ..................................................................... 208
Zongwen An, Bo Liu, Jie Xu
Reliability Evaluation of Lithography Machines Using An Customer Satisfaction Index .................................. 213
Longlong Zhang, Dashuang Luo, Jing Li, Hong-Zhong Huang
Static Strength and Durability Analysis of The Gear-Rack for An Aircraft Slat ................................................. 217
Tuo Zhang, Weimin Cui, Tianxiang Yu, Bifeng Song
Modeling and Analysis of Reliability for Regional Road Network via Anylogic Simulation .............................. 221
Xinxin Zhu, Yuejin Tan, Qiang Luo, Hongzhong Deng, Quan Zhang
Reliability Model of Missile With Disturbance-Dependence .................................................................................. 226
Yunxia Chen,Dan Xu, Jieping Gao, Rui Kang
A Study of Complete Lattice in Multi-State Coherent System Reliability Analysis ............................................. 233
Yu Pang, Xide Lai
Application of Beta Factor Method for Reliability Evaluation of EHSV ............................................................ 237
Yuan-Jian Yang, Weiwen Peng, Hang Zhou, Yu Liu, Shunpeng Zhu, Hong-Zhong Huang
A Hybrid Transmission Reliability Strategy for Wireless Sensor Networks ...................................................... 241
Guanglong Liu, Hailin Feng
Interactive Failure Analysis of Gyroscope Based on Net Failure Mode and Effect Analysis .............................. 246
Tieshan Zhao, Xinglin Qi, Jiakai Liu
Dynamic Precision Reliability Analysis forSix Degrees of Freedom Micro-Displacement Mechanism of Reticle
Stage in Lithography Machine Based on Monte-Carlo ........................................................................................... 250
Dashuang Luo, Kesheng Wang, Longlong Zhang, Jing Li, Hong-Zhong Huang
A Reliable Communication Scheme of Intelligent Micro-Grid .............................................................................. 253
Ninghui Guo, Lijun Qin
Performance Reliability Simulation Analysis for The Complex Mechanical System ........................................... 256
Yubin Hu, Peng Zhang, Hui Wang, Tianxiang Yu, Bifeng Song
Fault Tree Analysis on Kinematic Accuracy of Wafer Stage Using BDD and DFTA Technique ....................... 260
Guo-Zhong Fu, Zhuo-Hong Huang, Hai-Qing Li, Yan-Feng Li, Yu Liu, Hong-Zhong Huang
Decision Diagrams Method for k-out-of-n: G Systems............................................................................................ 263
Shu-Min Li, Shu-Bin Si, Shuai Zhang, Hong-Yan Dui
Lifetime Assessment of Inertial Navigation Devices ................................................................................................ 268
Tianhang Li, Hong-Zhong Huang, Xihui Liang, Yu Liu
Study on Constellation Per-Slot Availability ............................................................................................................ 272
Guangyan Zhao, Yufeng Sun, Weiwei Hu, Tong Qin
Software Development for Mechanical Reliability Analysis ................................................................................... 276
Zhuohong Huang, Haiqing Li, Guozhong Fu, Rong Yuan, Zhonglai Wang
A Software Reliability Prediction Method Based on Software Development Process .......................................... 280
Kun Han, Jun-Hai Cao, Shou-Hua Chen, Wei-Wei Liu
Reliability Assessment of CTCS-3 Using Bayesian Networks ................................................................................ 284
Hongsheng Su, Yulong Che
Reliability Modeling and Assigning Method for HXD Electric Locomotive ......................................................... 289
Shuxiang Guo, Zhangsheng Rong, Jianwei Yao, Huasheng Wang
Appling FAHP to Safety and Risk Assessment of CNC Spindle System Based on Hilbert Space ...................... 296
Chuang Yin, Liping He, Zhiqiang Luo, Hong-Zhong Huang
Multi-Level Reliability States Analysis Mothed in Agent-Based Complex System Reliability Simulation ........ 299
Jun-Hai Cao, Xiao-Long Chen, Ying shen
Bayesian Credible Limits of The Reliability and Its Applications ......................................................................... 303
Ming Han
Using Neural Network to Predict Reliability of Lithography Machine ................................................................. 308
Ruiyao Yang, Longlong Zhang, Wei Cai, Yu Liu, Hong-Zhong Huang
Step-Down-Stress Degradation Modeling Based on Gamma Process .................................................................... 312
Wei Li, Yu-Ying Liang, Gang Pan, Jiao Sun
An E-Bayesian Estimation for Reliability Assessment of A Success-Failure Type Device .................................. 316
Yi-Chao Yin, Jian-Feng Liu, Xue-Hai Wu, Shunpeng Zhu, Hong-Zhong Huang
Component Importance and Sensitivity Analysis in Bayesian Networks .............................................................. 320
Xiaopin Zhong, Qiu Li
PRA Based Reliability Analysis of Complexly Astronautic Phased-Mission System ........................................... 326
Xiaopeng Li
Reliability Analysis of Multi-State Systems Based on Bayesian Network ............................................................. 332
Ying-Kui Gu, Zi-Xi Yang
FMECA of T he Key Components of Circular Truss Antenna .............................................................................. 337
Wei Cai, Longlong Zhang, Zhisheng Zhang, Yan-Feng Li, Yuan-Jian Yang
Study on The Reliability Evaluation Method for Compressor Wheel of Turbocharger with Over-Speed Failure
Mode ............................................................................................................................................................................. 342
Zheng Wang, Zengquan Wang, Zhaoxin Ren, Li Zhuang, Ana Wang
Transient Response Analysis of Derrick Steel Structures ....................................................................................... 346
Pei-Ming Shi, Na Zhang, Dong-Ying Han
The Mission Reliability Modeling Methodology for Software Dynamic Evolution .............................................. 351
Yumei Wu, Yongli Yu
Design of Mechatronic-Hydraulic Product Dynamic and Multi-State Reliability Simulation Platform ............ 355
Hongqi Zhang, Xiaodong Shao, Jianguo Zhang, Bo Liu, Jianlei Si
Reliability Research for PV System Using BDD-Based Fault Tree Analysis ........................................................ 359
Rong Hu, Jinhua Mi, Tianyou Hu, Minling Fu, Pan Yang
Reliability Prediction, Network Construction and Software Development Based on Reliability Data Resources
...................................................................................................................................................................................... 364
Yuan Chen, Yuqin Zhu, Difan Li, Cong Liu, Changpeng Wang
Reliability Assessment for Multi-State Systems Under A Dynamic Load-Sharing Strategy ............................... 367
Xiaohu Zhang, Renqiang Xiu, Chujie Chen, Yu Liu
Comparisons of Series and Parallel Systems With Ramdom and Non-Random Components ........................... 372
Songchen Li, Yupeng Li, Yingyun Chen
A Copula-Based Function Model in Fuzzy Reliability Analysis on The Planetary Steering Gear ...................... 375
Pengbo Mou, Fenghe Tao, Changzhi Jia, Wanli Ma
Fire Explosion Risk Analysis for Hydrogen Storage Tank Based on Jet Fire Model ........................................... 379
Yue Wang, Miao Zhang
Risk Assesment Method Based on Concentrated Numeric Statistic Matrix ......................................................... 384
Cui-Juan Gao, De-Yong Zhao, Wei-Min Ye, Xiao Chen
Failure Modes and Effect Analysis on The Gyroscope of The INS on The Spaceflight Tracking Ship .............. 388
Feng Zhang, Fan Zhang, Yibin Ren
Study in Evaluating Armored Vehicle Engine Operating Condition Based on AHP-Gray Relating Analysis
...................................................................................................................................................................................... 391
Hui-Gi Zhang, Chun-Liang Chen, Zhan-Bong Bi, Jian Yao
Reliability Analysis for A Multi-Unit System With Failure Rate Interaction ....................................................... 395
Zhirong Li, Qi Gao, Shenyang Liu, Gang Liu
Bayesian Reliability Estimation of Electronic Components With Zero-Failure Data .......................................... 399
Ze Cheng, Zhaolong Xuan, Wei Wang, Tieshan Zhao
The Application of Fuzzy Evaluation Based FMECA for A Certain Type of Warhead ...................................... 402
Cheng Tang, Biao Xue, Debiao Meng
Performance Analysis of The Vehicular 1551B Bus System Using Stochastic Petri Net ..................................... 405
Guijun Shan, Guojun Wang, Yongqian Dai, Yuzhou Wang
Fuzzy Comprehensive Evaluation Method for Atmospheric Pressure Single Stage Type Producer Gas
Generator ..................................................................................................................................................................... 409
Yue Wang, Kai Zhang
Quantitative Area Risk Assessment and Safety Planning on Chemical Industry Parks ...................................... 413
Yang Li, Hui Wang
Mission Reliability Assessment of Military Helicopter Based on State ................................................................. 419
Jun Shen, Jian Li, Zongyuan Li, Yanda Gao, Yong Yue
II. Robust, Reliability-Based, and Lifecycle Design
Reliability Improvement of Nuclear-Used Seal Auxiliary System with Redundancy at The Conceptual Design
Stage by RBD Modeling ............................................................................................................................................. 423
Shiyong Tan, Shuangfu Suo, Xiangfeng Liu, Yuming Wang
Gliding Trajectory Optimization Based on Hp-Adaptive Pseudospectral Method .............................................. 432
Kun Guo, Fenfen Xiong
Mean-Value First Order Saddlepoint Approximation Based Collaborative Optimization for Multidisciplinary
Problems Under Aleatory Uncertainty ..................................................................................................................... 438
Debiao Meng, Xiaoling Zhang, Hong-Zhong Huang, Zhonglai Wang, Ningcong Xiao
Design-In of Reliability Through Axiomatic Design ................................................................................................ 441
Dezhen Yang, Yi Ren, Zili Wang, Jing Xiao
Metamodeling Uncertainty Quantification in Multi-Level Engineering System Design ...................................... 449
Renqiang Xiu, Xiaohu Zhang, Yu Liu, Hong-Zhong Huang
Robust Layout Design of Pin-Hole Locators In Lampshade Assembly Process ................................................... 455
Zejun Wen, Fan Zhang
Improved Non-Intrusive Polynomial Chaos for Reliability Analysis Under Hybrid Uncertainty ...................... 460
Yao Wang, Shengkui Zeng, Jianbin Guo
Particle Swarm Optimization and Application to Valve Dynamic Characteristics Optimization ...................... 465
Jingdong Liu, Tianxiang Yu, Peng Jin
A Comparative Study of Relevant Vector Machine and Support Vector Machine in Uncertainty Analysis ..... 469
Yi Shi, Fenfen Xiong, Renqiang Xiu, Yu Liu
Research of Application of IDEF on Software Reliability Allocation .................................................................... 473
Qingquan Li, Heng Gao, Hongwei Yang, Jianping Wang, Zhen Lei
A New Solution Method for Non-Probabilistic Reliability Model of Linear Structural System ......................... 477
Ruixing Wang, Xiaojun Wang
Implementing Nataf Transformation in A Spreadsheet Environment and Application in Reliability Analysis
...................................................................................................................................................................................... 483
Hong-Shuang Li, Siu-Kui Au
Sensitivity Analysis of PCB’s Design Parameters of The Plated Through Hole ................................................... 489
Chenyan Liu, Weiwei Hu, Yufeng Sun
Research on Action Reliability for Ammunition Swing Device of Large Caliber Gun Based on Doubly
Truncated Normal Distribution ............................................................................................................................ 493
Xuewei Ke, Jian Hou, Tingfeng Chen
Research on Reliability Allocation Method About Environmental Control and Life Support System of Space
Station .......................................................................................................................................................................... 497
Haiming Li, Junyong Tao, Xiaoshan Yi, Hongwei Cheng
Reliability Allocation of Anti-Air Missile Weapon System Based on Ant Colony Algorithm ........................... 502
Jian-Jun Deng, Lin Zhang, Yan-Bin Li, Da Wu
Reliability-Based Robust Optimization of Steering Mechanism of Trucks By Using Evidence Theory ............ 505
Huixin Guo, Xinfa Yang, Lizhi Cheng, Pishun Ren, Maofu Liu
Robust Design of Decreasing RV Reducer's Transmission Error .......................................................................... 509
Yong-Hua Li, Zang Qing, Wei Li
Research on Methods of Allocation for Reliability Factors .................................................................................... 513
Hongyan Zhuo, Zhiqiang Liu, Xu Li
Robust Design of A Gearbox Transmission System Based on Maximal Variation .............................................. 516
Zhisheng Zhang, Wei Cai, Pingliang Cui, Huanwei Xu, Hong-Zhong Huang
Research of Front Seat Design Parameters on Rear Seat Passenger Safety ......................................................... 520
Ruhai Ge, Zibo Lu, Fei Zhao
A Method Based on Non-Linear FEM for Ultimate Limit State Assessment of Ship Hull Girders .................... 524
Benguo Gao, Yucong Deng, Shunqi Yang
Dynamic Error Analysis for Six Degrees of Freedom Micro-Displacement Mechanism in Reticle Stage of
Lithography Machine ................................................................................................................................................. 529
Dashuang Luo, Kesheng Wang, Longlong Zhang, Jing Li, Hong-Zhong Huang, Yu Liu
The Application of Design for Six Sigma in Product Design .................................................................................. 536
Wei Qu
Reliability Optimization for Redundant Flight Control System Based on Genetic Algorithm ........................... 539
Dashuang Luo, Kesheng Wang, Longlong Zhang, Jing Li, Hong-Zhong Huang
Optimal Design of Monocrystal Piezoelectric Generator for Different Vibration Forms ................................... 545
Liqing Fang, Lei Zhang, Deqing Guo, Zilong Ma
Imprecise Probability Based Reliability Analysis for Lubricating Oil Pressure Indicating and Alarming System
...................................................................................................................................................................................... 548
Zheng Liu, Haikun Wang, Liping He, Ningcong Xiao, Hong-Zhong Huang
Design Worm Gearing of Remotely Operated Vehicle Under Uncertainty .......................................................... 551
Shunqi Yang, Yuxin He, Yutao Zhou
Multidisciplinary Design Optimization Based on Physical Programming ............................................................ 555
Lei Liu, Huanwei Xu, Zhonglai Wang
Brief Review of Studies on Parametric Sensitivity and Optimization of Wedged-Ring Joint Structure ............ 559
Yihui Yin, Yuandong Liu, Peng Huang, Bing Xu
Modularization Design of Support Equipment Based on Fuzzy Clustering ......................................................... 563
Jun Li, Yu Zhang, Jingkai Zhou, Chengyuan Gong
III. Maintenance and Warranty Management
Maintenance Modeling and Optimization for Wind Turbine Systems: A Review ............................................... 569
Fangfang Ding, Zhigang Tian, Tongdan Jin
Computational Statistics in A Warranty Forecasting System ................................................................................ 576
Peng Liu, Peng Wang
Predictive Grouping Maintenance Strategy for Complex Structure Systems Using Importance Measure ..... 582
Kim-Anh Nguyen, Antoine Grall, Phuc Do Van
Optimized Maintenance Policies Subject to The Preventive Maintenance Before Warranty Expires ............... 589
Minjae Park, Ki Mun Jung, Dong Ho Park
Smart & Intelligent Maintenance System in POSCO.............................................................................................. 595
Siwon Lee, Changhwan Lee
An Empirical Study on Warranty Improvements Involving Design Teams ......................................................... 599
Yiliu Liu, Lisi Cao, Zixian Liu
Optimal Inspection Schedules for One-Shot Systems With Two Types of Units .................................................. 605
Won Young Yun, Li Liu, Young Jin Han, Dong Wook Rhee, Chan Gyu Han
Reliability and Risk Treatment Centred Maintenance ........................................................................................... 610
Martin Pexa, Tomáš Hladík, Zdeněk Aleš, Václav Legát, Miroslav Müller, Petr Valášek, Vít Havlů
A Delay-Time-Based Inspection Model for A Two-Component Parallel System ................................................. 616
Wenbin Wang, Xuejuan Liu, Rui Peng, Li Guo
Maintenance Optimization Considering Dependent Competing Failure Based on Renewal Process ................ 620
Chun Su, Xiaoquan Zhou
Hybrid Preventive Maintenance and Inspection Scheduling for A Multi-Unit Series System ............................ 626
Zhijun Cheng, Zheng Yang, Lin Tan
An Efficient Maintenance Optimisation Method for Series-Parallel Systems Using Stochastic Ordering and
Revenue Difference Boundaries ................................................................................................................................ 632
Yifan Zhou, Zhisheng Zhang, Yangqing Bian, Haitao Gao
Age Replacement Optimization With Uncertainty of Life Time Distribution Parameters ................................. 638
Su Wu, Xi-Sheng Jia, Liang Wen
An Optimal Policy for Maintenance, Intermediate Buffer, and Spare Parts ........................................................ 643
Shuyuan Gan, Zhisheng Zhang, Yifan Zhou
Maintenance Time Estimation Method in The Design Phase Based on Fuzzy v-Support Vector Machine ....... 649
Xu Luo, Yongmin Yang, Zhexue Ge, Fengjiao Guan
Comprehensive Analysis of System Reliability and Maintenance Strategy Based on Optimal Lifecycle Cost
...................................................................................................................................................................................... 654
Guangyu Chen, Shuyang Zheng, Yi Feng, Jing Li
Maintenance Modeling Based on The Economic Maintenance Costs .................................................................... 659
Chuan Lv, Jia Wang, Ying Li, Xinpeng Ma
Maintenance Optimization for A System With An Implemented Interval of Replacement Activities ............... 664
Wenke Gao, Zhisheng Zhang, Yifan Zhou, Lei Jiang
Estimation of Life Distribution and Maintenance Effect for Repairable Products .............................................. 670
Yang Ge, Qi Gao, Zhao-Xie Huang, Mao Jiang
Maintenance Disassembly Optimization Based on Petri Net and A* Algorithm .................................................. 673
Yong Liu,Hongqing Zhou, Tingxue Xu, Chenliang Sun
Warranty and Maintenance: A Literature Review ................................................................................................. 677
Xinyue Li, Yunxian Jia, Pengju Li, Jinrong Zhang
A Maintenance Decision-Making Model Based on Risk Evaluation ...................................................................... 684
Chuan Lv, Jiayuan Xiong, Yan Ding, Haoran Zhou
The Calculation of Uncertainty Data Based on Blind Number .............................................................................. 689
Xiang-Long Ni, Jian-She Kang,Jing-Zhong Li, Xu Ren
A Product Design Decision Model Based on Usage Intensity for Items Under Warranty ................................... 695
Zhijie Liu, Yun Yang, Deping Sun, Xiaolong Liu
Application of DPCA Based Stochastic Filtering Model and Comparison of Optimal CBM Policies ................ 700
Weiguo Wang, Lei Sun, Xiaobo Lu, Hongbo Liu
Discussion on Application of Reliability-Centered Maintenance to Reliability Improvement in New Nuclear
Power Plants ................................................................................................................................................................ 707
Lijun Huang, Xiaohu Yang, Hong Jiang, Chunni Mo
The Research on Missile Inspecting Periods Optimization Using Case 2 Interval-Censored Proportional
Hazards Model ............................................................................................................................................................ 712
Yan Zhou, Yongxiang Li
Selective Maintenance Model Considering Cannibalization and Its Solving Algorithm ..................................... 717
Xue-Zhi Lv, Bao-Xin Fan, Yu Gu, Xin-Hui Zhao
Availability Model of Maintenance Interval Within Complicated Equipment Life-Cycle .................................. 724
Dong Liu, Yang Ge, Youwei Li
An EMQ Model With Maintenance Time in A Production System ....................................................................... 729
Bin Hua, Wenyuan Lv
Imperfect Maintenance Policy for A Two-Unit System With Failure Interactions Based on Improvement
Factor ........................................................................................................................................................................... 736
Yunzhi Yao, Chen Meng, Cheng Wang, Wenjiang Huang
A Failure Rate Model Analysis for Repairable System ........................................................................................... 741
Wei Peng, Xiaoling Zhang, Hong-Zhong Huang, Yu Liu, Rong Yuan
A Scheduling Model Based on Genetic Algorithms for Parallel and Batched Maintenance Tasks .................... 744
Yongmei Hui, Huaizhou Zheng, Jiani Liu,Yuefei Zhao, Zhigang Sun
Compilation and Optimization of Nuclear Power Plant Preventive Maintenance Program ............................... 748
Sheng Zhang, Chun-Ni Mo, Yu Chen, Meng Qu, Li-Jun Huang, Ju Fu, Qing-Qing Wang
Managing Performance Based Contract of Repairable System Under Three Replacement Policies ................. 754
Jian-She Kang, Xing-Hui Zhang, Jin-Song Zhao, Hong-Zhi Teng
IV. Failure Physics, Material Science, Data Analysis, and Reliability Testing
Fracture Mechanics Analysis of Cracked Structure With Partitioned Coupled Approach ................................ 758
Shinobu Yoshimura, Yasunori Yusa
Assessing The Effects of The Welding Processes on The Environmental Strength of an Multi-Pass Welded A106
GrB Steel Pipe ............................................................................................................................................................. 762
Gyu Young Lee, Young Soo Park, Dong Ho Bae
Improved Methodology for Calculating Initial Loading Strains in High-Temperature Creep Deformation .... 767
Woo-Gon Kim, Hyeong-Yeon Lee, Jae-Young Park, Seon-Jin Kim, Yong-Wan Kim
Development of An Efficient Management System of Energy Resources Consumed in PCB Manufacturing
Processes ...................................................................................................................................................................... 773
Gyu-Bong Lee, Min-Jae Ko, Young-Shin Kim, Dong-Whan Yeam
Statistical Aspects of Fatigue Crack Growth Life of Base Metal, Weld Metal and Heat Affected Zone in FSWed
7070-T650Aluminum Alloy ........................................................................................................................................ 778
Seon-Jin Kim, Hye-Jeong Sohn, Yeui-Han Jeong, Gunawan Dwi Haryadi
Degradation Process Influencing Safety of Constructional Adhesive Bonds ........................................................ 784
Miroslav Müller, Petr Valášek, Martin Pexa, Tomáš Hladík, Zdeněk Aleš, Václav Legát
Parametric Numerical Study of The Industrial Dryer for The Reduction of Energy Consumption .................. 789
Seong-Wook Cho, Wookjin Lee, Ji-Woo Nam, Gyu-Bong Lee
Study on The Lifetime Assessment of Bearings According to The Output Shaft Supporting Structures in
Transmissions of Tracked Vehicles ........................................................................................................................... 793
Jong-Won Park, Dong-Soo Jung, Yong-Bum Lee, Byung-Oh Choi
Lifetime Estimation Using Only Failure Data With Information on Discarding ................................................. 798
Zhenzhen Li, Kazuyuki Suzuki, Watalu Yamamoto
Development and Characterization of Sintered Friction Materials for Brake Pads ............................................ 803
Byeong-Choon Goo, Sung-Soo Ryu, Seongwon Kim
Rate-Dependent Behavior and Failure Characteristics of Carbon/Kevlar Hybrid Woven Composites ............ 808
Sung-Choong Woo, Tae-Won Kim, Jin-Young Kim
Log-Weibull Distribution as A Lifetime Distribution ............................................................................................. 813
Renyan Jiang, Tianjun Wang
Research on Reliability Test and Assess Method for Gear Door Lock Considering Multi Factors .................... 817
Zhongchao Sun, Tianxiang Yu, Weimin Cui, Bifeng Song
Static and Dynamic Analysis of A Wind-Solar Hybrid Street Lamp ..................................................................... 821
Wang Wei, Xu Xiang, Tianhang Li, Junyu Fu
Thermal Simulation of Stirling Cooler in IR System Based on Flotherm ............................................................. 824
Yaqiu Li, Guangyan Zhao, Yufeng Sun
Thermal Stress and Reliability Analysis of Microstrip Isolator Under Temperature Shock .............................. 829
Limei Rong, Qingwei Yu, Longhuan Du, Jiangfeng Du, Xiaoming Zheng, Xiaowen Zhang, Zuwen Wang
The Strength Experimental Design and Data Analysis of The Nose Landing Gear ............................................. 832
Hongjuan Li, Weimin Cui, Fengzhu Zheng, Junhao Guo
Failure Mode Identification Using Thermal Data Based on Mixed Effects Model in Chemical Mechanical
Planarization Process ................................................................................................................................................. 836
Tao Liu, Xi Zhang
The Qualitative Modeling Method of Fault Propagation in Electronic Components .......................................... 842
Chen Chen, Guangyan Zhao, Yufeng Sun, Xiaoxue Ding
Accelerated Reliability Growth Test Under Multiple Environment Stresses ....................................................... 848
Yanqing Ye, Jiang Jiang, Qi Liu, Weiwei Wang
Outlier Test and Analysis Method of Degradation Data Based on Linear Regression ........................................ 854
Hui-Rui Zhang, Yun-Xia Chen, Rui Kang, Feng-Chun Lin
Analysis of Multi-Body Systems With Revolute Joint Wear .................................................................................. 859
Huan Pang, Tian-Xiang Yu, Bi-Feng Song
Effect of Accelerated Ageing on The Mechanical Properties of Composite Repaired Aluminum Plates ........... 863
Zun Wang, Yishan Zhang, Jun Xue, Wei Yang
A Study of Bonding Reliability for Substrate to Metal Cavity of Microwave Module ......................................... 867
Bin Yao, Canxiong Lai, Ping Li, Zeya Peng
A Study on Bayesian Design of Degradation Tests With The Inverse Gaussian Processes ................................. 870
Weiwen Peng, Hong-Zhong Huang, Zhonglai Wang, Yu Liu, Shun-Peng Zhu
Multi-Physics Based Safety Valve Sealing Reliability Analysis Under Compound Loading ............................... 873
Ye Lin, Weimin Cui, Bifeng Song
Research on Heading Sensitive Drift Storage Behavior of Inertial Platform System UnderThe Influence of
Temperature .............................................................................................................................................................. 878
Xiaokai Huang, Yunxia Chen, Rui Kang
A Nonlinear Fatigue Damage Accumulation Model Based on Physical Properties Degradation and Accounting
for Load Interaction Effects ....................................................................................................................................... 885
Zhiqiang Lv, Huiying Gao, Fangjun Zuo, Hong-Zhong Huang, Shun-Peng Zhu
Fatigue Life Prediction for Wind Turbine Main Shaft Bearings ........................................................................... 888
Yong Liang, Zongwen An, Bo Liu
A Novel Method for Measuring The Dissimilarity Degree Between Two Pieces of Evidence in Dempster-Shafer
Evidence Theory ......................................................................................................................................................... 894
Jianping Yang, Bing Bai, Xiaojun Jiang, Hong-zhong Huang, Saiqiu Liu, Li-ping He
Accelerated Reliability Demonstration for Weibull Distribution with A Nonconstant Shape Parameter ......... 900
Wei Luo, Chunhua Zhang, Xun Chen, Yuanyuan Tan
The Life Prediction of Lead-Free Solder Joint With Type-I Interval Censored Data ......................................... 904
Jinhua Mi, Jie Wang,Yan-Feng Li, Hong-Zhong Huang, Yuan-Jian Yang, Weiwen Peng
Simulation-Based Constructions of Reliability Confidence Intervals from Degradation Data ........................... 908
Zhiguo Zeng, Yunxia Chen, Rui Kang
Physical Failure Analysis of A320 Flap Based on DMU.......................................................................................... 914
Wei Tian, Weimin Cui, Shijian Zhao
Analysis of Random Vibration Life of Mechanical Parts of Actuating Cylinder Based on The Finite Element
...................................................................................................................................................................................... 917
Si-Xue Qu, Dan Xu, Rui Kang
The Analysis of Abnormal Conditions for A Type of 10-Bit D/A Converter ........................................................ 921
Ping Yang, Lu Bai
Fatigue Life Estimation Using Unequal Interval Grey Model ................................................................................ 926
Fang-Jun Zuo, HuiyingGao, Zhiqiang Lv, Lipinghe, Hong-Zhong Huang
Research on The Wear Life of Slipper in Aero-Hydraulic Pump Based on Archard Wear Model and Liquid
Friction Work .............................................................................................................................................................. 930
Xun Liao, Yunxia Chen
Failure Analysis of Integrated Detector Dewar Cryocooler Assembly .................................................................. 935
Canxiong Lai, Shaohua Yang, Guoguang Lu
Accelerated Validation of Product Life Under A Second-Tier Stress .................................................................... 939
Qin-Feng Chen, Xiao-Bing Ma, Rui Kang
Failure Analysis for The Mechanical System of Autonomous Underwater Vehicles ........................................... 943
Zhiqiang Hu, Yi Yang, Yang Lin
An Approach for Prediction of Fatigue Life Based on Fatigue and Low-Energy Shocks ................................... 949
Hongxia Chen, Yunxia Chen
Accelerated Degradation Demonstration Test Method Based on Gamma Process Models................................. 956
Xiang Lu, Chunhua Zhang, Yuanyuan Tan, Wei Luo
Uncertainty Analysis of Correlated Crack Growth Parameters Using Copula Functions .................................. 961
Luping Gan, Yuanjian Yang, Yan-Feng Li, Yu Liu, Hong-Zhong Huang
Reliability-based Integrity Assessment of Pipeline Girth Weld Defects ................................................................ 965
Jian Chen, Qing-Shan Feng, Hai-Liang Zhang, Ming-Fei Li, Fu-Xiang Wang, Song Lin
Research on Life Calculation Method for Non-Electric Products Based on Life Model Library ....................... 969
Hailong Jing, Yunxia Chen, Xun Liao, Rui Kang
Dynamic Wave-Loading Fatigue Reliability Analysis of Deepwater Drilling Riser ............................................. 973
Xiu-Quan Liu, Guo-Ming Chen, Yuan-Jiang Chang, Lei Zhang, Fei Li
Research on The Reliability Assessment Methods Based on Single Performance Parameters Degradation Data
for Diesel Engine ......................................................................................................................................................... 978
Lixia Zhang, Fuzhou Feng, Jian Wang, Pengcheng Jiang
A Modified MPS Method for Fitting The3-Parameter Weibull Distribution ....................................................... 983
Renyan Jiang
Vibration Effects on Parameter Stability of Quartz Flexible Accelerometer by Accelerated Test ..................... 986
Dan Xu, Yun-Xia Chen, Rui Kang
Reliability Enhancement Test of Vertical Voice-Coil Motor on Wafer Stage of Lithography Machine ............ 991
Zhean Gong, Zhisheng Zhang, Longlong Zhang, Ruiyao Yang, Yu Liu, Hong-Zhong Huang
Design of Safety-Critical Software Reliability Demonstration Test Based on Bayesian Theory ......................... 996
Yumei Wu, Haifeng Li, Yongli Yu
Research on The Accelerated Life Test of Rolling Bearing Based on Competing Failure ................................. 1006
Fenglong Yin, Ye Sun, Jiyang Shen, Zhixin Jiao
Study on QFD-Based Primary Selection Method for Test Signals ....................................................................... 1010
Yinghua Li, Guangyan Zhao, Weiwei Hu
The Reliability of The Process of Lifetest of The Aerospace Photoconductive Infrared Detector .................... 1015
Hai-Yan Zhang, Fu-Long Zhuang, Yan-Jin Li, Hai-Mei Gong
Creep Life Prediction Model of Aircraft Turbine Disc Alloy Based On Continuum Damage Mechanics ....... 1018
Zhisheng Zhang, Pingliang Cui, Ningbo Liu, Shun-Peng Zhu, Hong-Zhong Huang
Parameter Estimation of Accelerated Model for Birnbaum-Saunders Distribution Based on Best Unbiased
Integral Estimate Method ........................................................................................................................................ 1022
Li Yang, Xiaobing Ma
The Assessment Method of Weapon Equipment Reliability Based on Regression Analysis ............................. 1027
Yanbin Li, Lin Zhang, Gang Feng, Jianjun Deng
Experiment and Numerical Simulation of Total Dose Effects in The Substrate PNP Transistors ................... 1030
Ting Zhang, Yuan Liu, Yun-Fei En, Yu-Juan He, Jian-Bo Liu, Jin-Li Cheng, Bin Li
Application of Classic Rating-Monotonic Scheduling Algorithm in UAV Engine Test System ........................ 1033
Yue-Mei Luo, Hai-Qing Li, Rong Yuan, Zhuohong Huang
Research on Wear Behavior of Different Graphite Contents of NBR Under Dry Sliding ................................. 1037
Fengyan Yang, Yingnan Sun, Shijie Wang
Modeling Degradation with A New Independent Increment Process .................................................................. 1040
Qiong Wu, Jian-Zhong Yang, Jing-Yan Wang, Li Xue
Reliability Research of Impact Fatigue Life for Pump's Valve Covers ............................................................... 1045
Guodi Feng, Shimin Dong, Leilei Gao, Xiaojing Wang
Analysis of Typical Failure Modes and Causes for Space Thick Film Fuse ........................................................ 1051
Jing Zhao, Shan-Shan Cao, Yu-Liang Dong, Hong-Wei Zhang, Jian Gong, Qiang Xie
Simulation Test on Highway Transportation Vibration for Cartridge ............................................................... 1056
Haiguang Li, Zhentao An, Xinghui Zhang, Ying Liu, Liutong Wang
Research on Heat Destructiveness and Thermal Explosion of Organic Flammable and Explosive Substances
.................................................................................................................................................................................... 1060
Quanmin Bu, Weining Cai
Shaping of Continuous Carbon Fibre Reinforced 5A06 Composites By Vacuum Anti-Pressure Infiltration
Technology ................................................................................................................................................................. 1065
Xinkun Wang, Shenghai Xi,Yi Chen
A Simple Bayesian Estimation of The Log-Logistic Distribution ......................................................................... 1069
Wanbo Lu, Rui Ke
Fatigue Life Analysis of An Aero-engine With The Measured Load Spectrum ................................................. 1074
Wei Cai, Pingliang Cui, Ruiyao Yang, Yuanjian Yang, Yan-Feng Li, Hong-Zhong Huang
Research on Equipment Health State Evaluation Model Based on Deterioration Degree ................................ 1077
Haiying Ma, Lin Zhou, Li Liu, Yue Bao
Failure Causes and Countermeasures Analysis for A Large-Scale Reciprocating Compressor Vibration ..... 1081
Jing Zhao, He Li, Shijie Wang
Thermal Effects in 3-5μm Solid State Lasers ......................................................................................................... 1086
Guoguang Lu, Mingming Hao, Yun Huang, Yunfei En
Probabilistic Fatigue Life Prediction of Turbine Disc Considering Model Parameters Uncertainty ............... 1089
Liangliang Ding, Liping He, Shunpeng Zhu, Hong-Zhong Huang
Reliability Simulation Analysis Method Based on Stress-Damage Model of Electronic Product ..................... 1092
Jiang Shao, Chenhui Zeng
Optimal Design of Double Stresses Accelerated Life Test With Competing Risks ............................................. 1097
Ya-Feng Meng, Zhi-Wang Sun, Gang Pan, Yue-Jiang Li
A Fusion Method of Zero-Failure Data in Different Environments for Reliability Assessment of Success-Failure
Type Products ........................................................................................................................................................... 1102
Jianfeng Liu, Yichao Yin, Guozhong Fu, Jing Li, Shun-Peng Zhu
Research on Accelerated Electrical Stress Test for Electronic Product .............................................................. 1106
Guo-Long Zhang, Jin-Yan Cai, Gang Pan, Wei Li, Bo-Feng Ren
Modeling of Reverse Subthreshold Currents in The A-Si:H TFTs ...................................................................... 1110
Yuan Liu, Yun-Fei En, Yu-Juan He, Qian Shi
Fatigue Life Assessment of Welded Structures By Effective Notch Stress Approach ........................................ 1113
Chuanhao Wu, Dan Ling, Fang-Jun Zuo, Huanwei Xu, Shun-Peng Zhu
Sensitive Analysis of EMI Effect in The μA740 Operational Amplifier Circuit ................................................. 1118
Jin-Li Cheng, Yuan Liu, Ai-Xiang Wei, Jian-Bo Liu, Ting Zhang, Yun-Fei En, Jia-Jun Lv
The Relationship Between Oil Resistance and Abrasion Resistance of FKM/NBR Blends in Oil Medium ..... 1122
Yuzeng Zhang, Mingyin Yan, Shijie Wang, Xiaoren Lv
Uncertainty Analysis of Turbine Blade Fatigue Life Distribution Based on Bayesian Inference ..................... 1126
Jing Li, Dashuang Luo, Longlong Zhang, Shun-Peng Zhu, Hong-Zhong Huang
The Theoretic and Testing Research on Fitful Halt of Disengaging Rod in a Weapon Launch Pad ................ 1129
Li-Wei Tang, Zhong-Xing Sun, Ping Wang, Xiu-Wen Jin
Reliability and Failure Analysis of DC/DC Converter and Case Studies ............................................................ 1133
Bin Yao, Hui Chen, Xiao-Qi He, Qing-Zhong Xiao, Xian-Jun Kuang
Damage Effectiveness Research for Terminal Guided Projectile to Armored Target Paper ............................ 1136
Zhining Zhao, Quan Shi, Dong Mi, Junjie Dong, Jian Tang, Xinhua Feng, Han Liu, Guojiang Ma
Fatigue Lifetime Assessment of Aircraft Engine Disc Based on Multi-Source Information Fusion ................. 1140
Pingliang Cui, Zhisheng Zhang, Wei Cai, Hong-Zhong Huang, Yan-Feng Li, Haikun Wang
Analysis of Equipment’s Software Test’s Problems and The Countermeasures ................................................ 1143
Jun-Ping Zhang, Wei-Feng Li, Jie Yang, Zhi-Yuan Ding
Reliability Assessment of Degradation Product Based on Accelerated Factor ................................................... 1147
Haowei Wang, Tingxue Xu
Forecasts and Analysis of Output Characteristics on Giant Magnetostrictive Material ................................... 1152
Zhongbo He, Zhaoshu Yang, Dongwei Li, Xu Cui, Guangming Xue, Yulong Li
Total Dose Irradiation Effects in The μA740 Operational Amplifier With Different Biases ............................ 1156
Jian-Bo Liu, Yuan Liu, Jin-Li Cheng, Yun-Fei En, Ting Zhang, Yu-Juan He, Fu-Yao Dong
Reliability Analysis of An Electric Control System Based on Type I Censored Test Zero-Failure Data Using
Bayesian Methods ..................................................................................................................................................... 1160
Jing Li, Wei Guo, Longlong Zhang, Dashuang Luo, Shun-Peng Zhu, Hong-Zhong Huang
Malicious Circuitry Detection Using Transient Power Analysis for IC Security ............................................... 1164
Liwei Wang, Hai Xie, Hongwei Luo
The Failure Mode and Mechanism Analysis of Filament in Heater of Traveling Wave Tube .......................... 1168
Fangfang Song, Xiaoqi He, Yunfei En
A Study on Vibration Fatigue of Engineering Structures ..................................................................................... 1172
Ruiyao Yang, Longlong Zhang, Pingliang Cui, Shun-Peng Zhu, Hong-Zhong Huang
Study on Pitting Corrosion of Stainless Steel for Electric Water Heater Tank .................................................. 1178
Xiongzhi Xiang, Xinying Liu, Xugao Hu, Xiaojun Bai
Prediction on Extrusion Force in Copper-Chromium Alloy Extrusion Processing Based on Projection Pursuit
Regression .................................................................................................................................................................. 1181
Lianghai Yi, Yucai Dong, Min Lin, Ling Zhang, Xiaoyan Wang
Simulation on The Radiation Characteristic of Planar Array Antenna Subjected to The Single-Hole Damage
.................................................................................................................................................................................... 1184
Feng Liu, Quan Shi, Guangyan Wang, Xianglong Ni, Xinming Cai
Bayes Statistical Analysis of Burr XII Distribution in Random Censoring Life Test ........................................ 1189
Jie Zhou, Xingshi He
Dynamic Mechanical Properties and Parameters of Constitutive Model for Lead-Free Solder ....................... 1193
Jian-Zhuang Zhi, Gui-Bo Yu, Li-Jun Cao, Zhi-Ling Chen, Wen-Ya Bai
Investigation on Reliability of Thermoelectric Cooler for Space Remote Sensing ............................................. 1196
Yang Wang, Yani Zhang, Peng Ji, Xiangrong He, Guangyu Fan
Weibull Distribution Research Based on Fourier Series ....................................................................................... 1200
Lei Liu, Huanwei Xu, Nan Li, Weiwen Peng, Hong-Zhong Huang
V. Reliability, Maintainability, and Supportability
Practice and Thinking of The Durability Tests of Airborne Equipments in China ........................................... 1204
Zetao Xiong, Peng Zhang
A Method for Software Reliability Test Case Design Based on Markov Chain Usage Model........................... 1207
Yigang Wang, Fei Ye, Xiaodong Zhu, Caihua Wu
An Improved Matching Algorithm and Applications in The Simulation Platform of C4ISR System .............. 1211
Gang Niu, Pengliang Lv, Yajun Zhang, Wenya Bai, Wenbin Cao
A Developing Method of Aircraft HIRF/L Preventive Maintenance Program ................................................... 1215
Yiyong Cui, Chen Cui
A Maintenance Working-Posture Evaluation Methodology Based on Shaperecorder ...................................... 1219
Dong Zhou, Qing-Yuan Cao, Xu Jia, Zhi-Qi Guo
Customer Requirements Analysis Method in Lean Six Sigma Project Selection Based on RAHP ................... 1224
De-Yong Zhao, Wei-Min Ye, Cui-Juan Gao, Min-Fang Zhang
Design and Implementation of Virtual Maintenance Training System Based on Cortona 3D .......................... 1229
Junhai Cao, Xiaolong Chen, Dan Xu
Integration Method and Example of Six Sigma and CMMI for Process Improvement .................................... 1233
Wei Qu
Frameworks of Process-Based Sampling Inspection for Ammunition Products ................................................ 1237
Jian Zhang, Rong Xu, Chunning Jia
Research on Factors and Management Optimization of The Emergency Production Response Capacity of
Equipment Manufacturing Systems ........................................................................................................................ 1240
Haidan Wang, Yukui Ding, Jianwei Zhen
The Research on The Design Technology of Weapon System of Systems ........................................................... 1245
Jun Yu, Tinghua Peng, Yiguang Ren, Baohua Zheng
The Joint Optimization Model for Spare Part Demand and Maintenance Cost Under Compound Maintenance
Strategy ...................................................................................................................................................................... 1249
Qiwei Hu, Xu Ren, Feng Li, Yongsheng Bai
Based on Set Pair Analysis of Spare Parts Supply Accurate Security Scheme Decision ................................... 1253
Lin Zhang, Feng Gao, Fengli Chen
A Multiple Attribute Evaluation Method Based on Improved Uncertain Linguistic Hybrid Geometric Mean
Operator .................................................................................................................................................................... 1256
Yong Liu, Chenliang Sun, Tingxue Xu, Hongqing Zhou
Application and Validity Analysis of EM Algorithm in Reliability Evaluation of Aviation Equipment .......... 1261
Anwei Shen, Jilian Guo, Lingtong Jia, Zhuojian Wang
Research on Spare Parts Inventory Control Based on Modified Team Order Policy ........................................ 1266
Hongqiang Gu, Changzheng Qu, Tielin Liu, Xuezhi Lv
Effective Availability Simulation Evaluation Research on Complex Ship System ............................................. 1271
Zhicheng Chen, Lu Yao, Jianjun Yang
Research on The Method to Coordinate The Aircraft Echelon Use of Aviation Fleets ..................................... 1274
Yuanda Wang, Qian Zhang
Research on Software Maintainability Evaluation Based on Fuzzy Integral ...................................................... 1279
Xue-Liang Hao, Xiao-Dong Zhu, Li Liu
Effectiveness Evaluation Research of Quality Management System ................................................................... 1283
Jianxin Huang, Yaqin Bian, Wensheng Cai
The Man-Hour Quota Establishing for Professionally Concentrative Repair of Armored Equipment Unit
Based on GERT ......................................................................................................................................................... 1289
Wenhua Shi, Chunliang Chen, Xianming Shi
Research on Equipment Non-Core Support Capability ........................................................................................ 1293
Liying Cai, Jinna Jia, Kai Wang, Yunchuan Zhou
Motion Capture of Maintenance Personnel Based on Multi-Kinect .................................................................... 1297
Guozhu Han, Wu Song
Effectiveness Analysis for Tanker Aircraft in The Aerial Refueling Stage ......................................................... 1300
Yuanda Wang, Zhe Li
The Historical Evolution and Inspiration of Military-Civilian Integration of Equipment Maintenance Support
Relation ...................................................................................................................................................................... 1304
Ming Zhao, Haibo Zhang, Haiying Du, Lei Feng
Reliability Analyses of Digital Protection Relay System ....................................................................................... 1308
Xia Tian, Qi-Wei Hu, Yong-Sheng Bai, Yan Tian
A Study on Quality Traceability of Transmission Assembling Based on Kruskal-Wallis Method ................... 1312
Lianzhi Li, Mingyi Tsai
Improved Ant Colony Algorithm for System Efficiency Optimization of Supply Facilities .............................. 1316
Guozhu Han, Ningjun Fan, Kai Lv
Research of Probability Risk Assessment Based on Expanded ESD Dynamic System ...................................... 1320
Jianxin Huang, Shubin Li, Yaqin Bian
Research on Fragment Impact Initiation of The Shelled Explosive ..................................................................... 1325
Ran Xiong, Xin-Bao Gao, Jun-Kun Zhang, Xing-Chun Xu, Meng Gao
Gray Correlation Degree Assessment of Construction Unit Equipment Quality in Use Stage Based on TOPSIS
.................................................................................................................................................................................... 1329
Yuquan Wang, Chaoshuai Han, Dan Xu
Research on Allocation Optimization Model of Multi-Echelon Inventory Based on Horizontal Support ....... 1334
Chen Jiang, Qiaoli Mi
Maintenance Tools Category Integration Method Based on Grey Situation Decision-Making ........................ 1338
Yabin Wang, Hongbo Liu, Zhen Li, Wensheng Li
Research on Procedure and Method for Identification of General Quality Characteristics ............................. 1344
Wei-Wei Liu, Shou-Hua Chen, Fu-Sheng Liu, Dan Xu
Research on Task Allocation Model Based on The Professional Growth Law ................................................... 1349
Bing Chen, Xiao-Dong Zhu, Tao Chen
Research on Two Level Maintenance Functions and Operation Processes of Modern Aircraft ....................... 1353
Yuanda Wang, Qing Xia
Research of Coordinate Supply Policy of Spare Parts Based on Demand Inventory ......................................... 1356
Fu Su, Changzheng Qu, Hongqiang Gu, Lu Gao
The Ascertain Method Research of Support Quantitative Parameters for Equipment Requirement
Argumentation Based on Simulation .................................................................................................................... 1361
Haidong Du, Junhai Cao, Wei Wu
Research of Quick-Repaired Test on Stealth Coating ......................................................................................... 1365
Yuming Li, Bin Geng
Research on Remote Maintenance Support System of Surface-to-Air Missile Equipment ............................... 1368
Guodong Gu, Junhong Hu, Lin Zhang, Hailin Zhang
Evaluation Methods for Maintenance Quality of Missile Weapon Equipment .................................................. 1372
Hua Zhang, Tielu Gao, Jun Ang
Optimization Design and Experimental Study of The Nozzle Program of Impulse Anti-Riots Water Cannon
.................................................................................................................................................................................... 1375
Chaozu Ma, Zhefeng Zhang, Junjie Dong, Zhining Zhao, Can Jin,Long Chi, Na Hu, Jian Tang
Research on Validation Method of Dynamic Action of Equipment Maintenance Support Simulation
Conceptual Model ..................................................................................................................................................... 1379
Chuang Gu, Xisheng Jia, Bing Liu, Guiqi Wang, Hang Liu
Application of The Set Pair Analysis Based on Entropy and Weight to Efficiency Evaluation of The BDAR for
Amphibious Equipment ........................................................................................................................................... 1383
Long-Yang Xu, Zhao-Lei Wei, Chun-Liang Chen, Yuan-Sheng Dong
MAS-Based Reliability Evaluation Model in General Equipment Supply Chain .............................................. 1387
Lei Gao, Jun Gao
Joint Optimization Model for Support Equipment’s Quantity Based on Support Equipment’s Fill Rate and
Utilization Rate ....................................................................................................................................................... 1393
Wen Jia
Research on Safety Assessment of Gas Environment in Ammunition Warehouse ............................................ 1397
Jianguo Liu, Zhentao An, Qian Zhang, Tieshan Zhao, and Gang Liu
Research on Force Construction of High-Tech Equipment Maintenance Support ............................................ 1400
Qing Xie, Fan Lu
A Design of Radio Maintenance Simulation Training System Based on LabVIEW .......................................... 1404
Zhe Wang, Yeshuang Tan, Tianhui Zhang
A New Method of Ascertaining Optimal Detection Period of Machine Equipment’s Condition Maintenance
.................................................................................................................................................................................... 1408
Yanbin Li, Guangjun He, Gang Feng, Baoquan Li
Research on The Model of Tradeoff Analysis of Maintenance Time Based on Constraints.............................. 1411
Jun Yang, Songshan Wang, Hui Liu, Xingxin Li
Anti-Tank Company Battle Unit’s Effectiveness Evaluation Based on ADC and AHP ..................................... 1416
Wei-Feng Li, Jun-Ping Zhang, Jie Yang, Jie Liu
Research of New Equipment Maintenance Information Management Based on Data Mining ........................ 1420
Hong-Li Jia, Gang Liu, Bing Hao, Bing Feng, Zhi-Rong Li
Research on Quality Control in Outsourced Process of Aviation Equipment Development and Production . 1424
Junjie Dong, Hai-Wei Bai, Peng Li, Jie Zeng, Zhi-Ning Zhao, Long Chi
Research on Equipment Support Forces Configuration Based on Field Theory................................................ 1428
Xu Lu, Dong Mi, Dong Liu, Ping Gu
Research on Key Technologies of Aircraft Two Level Maintenance System ...................................................... 1433
Yuanda Wang, Qing Xia
Research on Decision-Making Process of Condition-Based Maintenance .......................................................... 1437
Yaohui Zhang, Shaohua Wang, Xiaohai Han
Maintainability Level Evaluation Based on Distribution Characteristics for A Certain Type of Equipment . 1441
Yanjiang Zhou, Guibou Yu, Zhanjie Yuan, Qing Hong, Qiao Ma
Research on Equipment Core Maintenance Capability ........................................................................................ 1444
Dongpo Zhang, Liying Cai, Kai Wang, Dan Du
The Research on Key Problem of Stereoscopic Warehouse With Tandem Storage Space ................................ 1447
Meng Jin, Xihui Mu, Fengpo Du, HaoLiang Guo, Bo Wu
Construction of Maintenance Accessibility Evaluation Index Based on Purpose ............................................... 1451
Desuo Huang, Qin Li, Congju Zuo, Jun Li
Set Pair Comprehensive Evaluation of Naval Gun Maintenance Support Capability ....................................... 1455
Qiaoli Mi, Tingxue Xu, Haowei Wang
The Comprehensive Evaluation Method of Equipment Maintainability Parameter Based on Multi-Hierarchal
Gray Correlation Degree .......................................................................................................................................... 1461
Da Xu, Bao-Qi Wang, Xi Wu, Shu-Lin Liu
Universal Design of A Distributed Monitoring System for Large-Scale Moving and Complicated Equipment
.................................................................................................................................................................................... 1465
Huaiguang Wang, Peilin Zhang, Zhiyong Shi
An Optimization Model for Spares Inventory Under The Minimum Average Time for Waiting Spares ....... 1470
Shengxue Yu, Yanqiao Chen, Yuwen Wang
A RCM Analytical Method Considering Proactive Maintenance ........................................................................ 1473
Zhong-Hua Cheng, Li-Qing Rong, Zhi-Yong Liu
Research on The Maintenance Process Modeling Method for Complicate Equipments ................................... 1477
Lin-Hong Li, Ping Li
Study of Assessment Method for Emergency Maintenance Guarantee Capability at Vehicle Equipment of
Armed Police Force .................................................................................................................................................. 1480
Ran Tan, Heping Cui, Junjie Dong, Xi Li, Junjie Dong, Guojiang Hou, Zhining Zhao
Constructing Quality Management System and Enhancing Scientific Research Quality of Military Academy
.................................................................................................................................................................................... 1484
Lingyun Chen, Xu Lu
The Research and Realization of Equipment Maintainability Verification Method Based on Digital Human
Technique .................................................................................................................................................................. 1488
Da Xu, Baoqi Wang, Fang Liu, Xi Wu
Evaluation on Equipment Maintenance Support Ability Based on FAHP ......................................................... 1492
Han Zhen, Lu Yu, Gu Ping, Li-Yun Chen
Analysis of Equipment Support System Attribute Constitution .......................................................................... 1496
Jianping Wang, Qingquan Li, Yong Shuai, Heng Gao, Chunlei Wang
Research on Stage Management of Aeroengine Low-Rate Initial Production .................................................... 1499
Junjie Dong, Weiming Zhao, Wei Tang, Guojiang Hou, Jie Zeng, Long Chi
Study on The Reliability Evaluating Method of Exterior Ballistic Discrimination Fuze ................................... 1504
Wen-Zhao Li, Jun Zhang, Xin Zhao, Jia Xue
Research on Improving Production Quality of Aero-Engine ............................................................................... 1507
Junjie Dong, Zhenhua Xiao, Xia Zhang, Xi Li, Rong He, Long Chi
A Novel Method for Circuit Fault Modeling and Simulation in Virtual Maintenance ...................................... 1510
Yuelong Ran, Yingmin Yan
Capability-Based Research on Supportability Parameters System ..................................................................... 1514
Qinqin Wang, Xiaolong Chen, Weida Tang
Study on Design Methods of Basic Maintenance Unit for Mission ...................................................................... 1519
Liu Zhang, Ying Xu, Yongli Yu, Bo Zhang
Study on Reliability Estimation of Command Control and Communication System ........................................ 1523
Hongyan Zhuo
Study on Parameter System of Reliability Maintainability Supportability for Satellite Navigation Terminal .......
.................................................................................................................................................................................... 1526
Min Kong, Xinshu Zhao, Fujun Wang
Specific Ontology Building on Equipment Maintenance Support Domain Research ........................................ 1530
Ye Wang, Quan Shi, Jian-She Kang, Guang-Yan Wang, Hang Liu
WSR and LSS Based Research on Building and Evaluation of Quality Management System for Armored
Equipment Maintenance .......................................................................................................................................... 1534
Hongbing Ye, Rui He, Jiexiang Chen
Research on Reliability and Maintainability of A New-Style Antitank Missile System ..................................... 1539
Gongjun Ning, Jiang Liu, Qi Chen, Chen Li, Tao Lin
The Key Operation Ascertaining of Armored Equipment Parts Batch-Repair Progress for Quality Monitoring
Based on FCE ............................................................................................................................................................ 1542
Chunliang Chen, Wenhua Shi, Shixin Zhang
A Spare Inventory Model With Lateral Supply ..................................................................................................... 1546
Hao Liu, Jianmin Zhao, Jinsong Zhao, Xinghui Zhang
The Control Strategies and Methods of Equipment Maintenance Quality ......................................................... 1551
Zhen Zhang, Yonggang Zuo, Jun Chen, Dean He
Study on Quality Management Based on The SE Process .................................................................................... 1554
Jun Li, Yu Zhang, Jingkai Zhou, Cheng-Yuan Gong
Competitive Procurement Mode Choosing of General Equipment Maintenance Materiel ............................... 1557
Xiao Chen, Woye Liu, Minfang Zhang, Fei Han
Modeling on Quality Control Process of Armored Equipment in Operational Phase ....................................... 1561
Huiqiang Lv, Chunliang Chen, Shixin Zhang
Maintainability Metrics of Software Architecture Based on Symbol Connector ............................................... 1564
Li Liu, Xiao-Dong Zhu, Xue-Liang Hao
Evaluation of Guided Ammunition Storage Life Based on Reliability Statistics ................................................ 1568
Meng Gao, Jinzhu Wang, Ping Cui
Research on The Construction of Business Training System about Equipment Maintenance Management
.................................................................................................................................................................................... 1571
Xin Shi, Shusen Zhang
The Application of TOPSIS on Sequencing Decision-Making in Equipment Battlefield Repair ...................... 1574
Haikuan Wang, Quan Shi, Fei Xiong, Kan Wang
Study on The Sale Tactics Based on The Substitution of New Support Implement for Old Support Equipment
.................................................................................................................................................................................... 1579
Dongxing Fang, Yong Li, Xiangdong Mao, Huagang Sun
Discussion on The Profession Training of Equipment Maintenance Support Management ............................. 1583
Fan Lu, Qing Xie
A New Software Maintainability Evaluation Model Based on Multiple Classifiers Combination .................... 1588
Fei Ye, Xiaodong Zhu, Yigang Wang
A Criticality Analysis Method of Failure Modes for Ordnance Software ........................................................... 1592
Jie Yang, Jun-Ping Zhang, Li-Na Zhao, Yancheng Sa
Study on Army Products’ RMS Parameter Shooting-Range Test and Assessment ........................................... 1596
Jinghua Song, Qisheng Guo, Liang Li
Research on Equipment Maintenance Material Support Capability Generation .............................................. 1602
Tielu Gao, Qi Gao, Liqing Rong, Hua Zhang
Equipment Quality Management Methods Discussion ......................................................................................... 1606
Yonghai Shan, Youliang Xu, Chen Yin
Research on Mission Sustainability Evaluation Models of Some-Type Weapon System Based on PMS ......... 1611
Chenglong Nie, Tao Li, Wei Zhang
The Procedure and Method of Determining The Equipment Testability Interface Signal ............................... 1616
Ai-Min Li, Yao-Hui Zhang, Rui He
Virtual Scene Simulation and Implementation Based on DirectX11 ................................................................... 1620
Jiqing Shi, Zongqiang Liu, Yanjiang Li, Hongyan Yuan
Research on The Technical Support Information Management and Quick Query Architecture Based on The
Concept of IETM ...................................................................................................................................................... 1624
Yun-Sheng Zhang, Gao-Fei Liu, Feng Liu,Xiao-Ning Chen
GA Based Modelling and Optimizing Combination of Multi-Component System Renewals ........................... 1627
Yong-Sheng Bai, Hong-Qiang Gu, Jian-Min Zhao, Ji Li
Reinforce The Process Management In Order to Improve The Production Quality of Equipment Research and
Development .............................................................................................................................................................. 1631
Guojiang Hou, Junjie Dong, Zhenhua Xiao, Chi Long, Zhining Zhao, Na Hu
Assessment Model for Battle Damage Location Process Based on Diagram Entropy Method ......................... 1637
Quan Shi, Zhifeng You, Qiwei Hu, Yuansheng Dong
Reliability Study to Improve The Diesel Engine Performance in Plateau Environment ................................... 1641
Yong-He Chen, Zhen-Biao Wei, Jian-Tao Feng, Kun-Peng Zheng
Analysis of The Reliability of Rasterized Electronic Information Equipment Maintenance ............................ 1646
Long Chi, Junjie Dong, Jianguo Liu, Na Hu, Rong He, Zhining Zhao
Model Research on Support Capability of The Ammunition Informationization Based on Principal
Component-Set Pair Analysis .................................................................................................................................. 1649
Zhining Zhao, Jian Tang, Dong Mi, Quan Shi, Peng Jin, Junjie Dong, Xinhua Feng, Zhongwu Wang, RuiWang
The Application of Control Chart Based on Bayesian Statistic in Equipment Maintenance Quality Control
.................................................................................................................................................................................... 1654
Yi Zheng, Qing-Xia Geng, Rui He
Study on A New Type of Vehicle Longitudinal Anti-Collision Warning System ................................................ 1658
Shibei Wang, Zhefeng Zhang, Junjie Dong, Zhining Zhao, Dehai Xiang, Jian Tang
FMECA and FTA Based Automatic Generation Technology in Familiar Failures Data Module of IETM .... 1662
Wenjiang Huang, Xisheng Jia, Qiwei Hu, Minfang Zhang
VI. Fault Diagnosis, Prognosis, Condition Monitoring, and PHM
Dynamic Simulation of A Planetary Gear Set and Estimation of Fault Growth on The Sun Gear .................. 1667
Xihui Liang, Ming J. Zuo
A Monte-Carlo Simulation Method for Industry Transformer Health Prediction Based on Dissolved
GasAnalysis ............................................................................................................................................................... 1673
Huashu Liu, Lin Ma, Yuantong Gu
Tuning of Fault Semantic Network Using Bayesian Theory for Probabilistic Fault Diagnosis in Process
Industry ..................................................................................................................................................................... 1677
Sajid Hussain, Amir Hossein, Hossam A. Gabbar
On-Line Model-Based Prognosis for Crack Growth Under Variable Amplitude Loading ............................... 1683
Dae Han Shin, Sang Hyuck Leem, Joo-Ho Choi
Health Assessment of Electronic Systems ............................................................................................................. 1689
Arvind Sai Sarathi Vasan, Michael Pecht, Bing Long
Whole Life Cost Modelling in Infrastructure Asset Management ....................................................................... 1695
Wenjuan Zhang, Wenbin Wang
Small Wind Turbine Generator Monitoring:A Test Facility and Preliminary Analysis ................................... 1698
Hongwei Cai, David Wood, Qiao Sun
Prognostic Theory and Key Techniques of Aircraft Hydraulic System .............................................................. 1702
Kang Wang, Shaoping Wang, Zhaomin He, Lei Han
Improved Grey Theory-Based Model in Time Series Adaptive Prediction ......................................................... 1707
Xiao-Lei Li, Jie-Zhong Ma, Yang-Ming Guo, Jiang-Yan Sun
An Adaptive Signal Processing Method for Extraction of A Weak Bearing Signal ........................................... 1712
Wei Guo, Kesheng Wang, Ming J. Zuo
Linear Correlation-Based Sparseness Method for Time Series Prediction with LS-SVR ................................. 1716
Yangming Guo, Yafei Zheng, Xiangtao Wang, Guanghan Bai
Feature Analysis of Asymmetric Fault in Asynchronous Motor Based on Quantitative Simulation and Park’s
Vector Method ........................................................................................................................................................ 1721
Junyao Li, Guojun Qin, Niaoqing Hu
Machinery Condition Prediction Based on Wavelet and Support Vector Machine ........................................... 1725
Chao Li, Shujie Liu, Hongchao Zhang, Yawei Hu
Rolling Bearing Reliability Estimation Based on Logistic Regression Model ..................................................... 1730
Hongkun Li, Yinhu Wang
Application of Wavelet Transform and EEMD in Electromagnetic Acoustic Signal De-Noising ..................... 1734
Peng Chen, De-Lai Han, Qiang-Fu Cai, Hao Liu
Feature Optimization for Bearing Fault Diagnosis ............................................................................................... 1738
Mao Wang, Niao-Qing Hu, Lei Hu, Ming Gao
Exponential Smoothing Model for Condition Monitoring: A Case Study .......................................................... 1742
Yawei Hu, Hongchao Zhang, Chao Li, Shujie Liu, Yuanliang Zhang
Study on Real-Time Reliability Evaluation and Prediction of Machining Center Based on Expert Modeler
.................................................................................................................................................................................... 1747
Fei Chen, Dameng Jiao, Junzhao Yang, Binbin Xu, Yinkai Wang, Chao Chen
Bayesian Network Based Fault Diagnosis and Maintenance for High-Speed Train Control Systems ............. 1753
Yu Cheng, Tianhua Xu, Lianbao Yang
The Information-Enhanced Fault Diagnosis System Design of Avionics Power Supply Module ..................... 1758
Fuchao Song, Wenkui Hou, Long Shi
Remaining Useful Life Estimation for Degradation and Shock Processes .......................................................... 1762
Haikun Wang, Yu Liu, Zheng Liu, Zhonglai Wang, Hongzhong Huang
An EMD-SVR Method for Non-Stationary Time Series Prediction .................................................................... 1765
Jun Fan, Yanzhen Tang
Knowledge Representation Method for Spacecraft Health Status Telemetry Monitoring ................................ 1771
Ta Wu, Dongyang Sun, Tianxiang Yu
A Modified Non-Linear Damage Accumulation Model Considering Load Interaction Effects Under Two -level
Loading .................................................................................................................................................................... 1774
Huiying Gao, Fangjun Zuo, Hong-Zhong Huang, Yu Liu, Shun-Peng Zhu
Shaft Center Orbit Diagnoses Technology of Broken-Blade Propeller Induced Shaft Vibration Fault ........... 1777
Lijian Ou, Deyu Li, Jun Li
Theoretic Modeling and Numerical Simulation of The Electromagnetic Sensor for Online Wear Debris
Monitoring ................................................................................................................................................................. 1781
Baoxi Li, Dingxin Yang, Zheng Hu, Yongmin Yang
The Combined Diagnosis Approach for The Satellite Attitude Control System Based on Observer Redundancy
.................................................................................................................................................................................... 1785
Yao Cheng, Rixin Wang, Minqiang Xu, Yang Jin
Fault Prognostic Technology of Complex Electronic Equipment for PHM ........................................................ 1790
Xi-Shan Zhang, Xin-Yue Li, Kao-Li Huang, Peng-Cheng Yan, Guang-Yao Lian, Shao-Guang Wang
Review of Remaining Useful Life Prediction Using Support Vector Machine for Engineering Assets ............ 1793
Longlong Zhang, Zhiliang Liu, Dashuang Luo, Jing Li, Hong-Zhong Huang
Influence of Single-Phase Short Circuit to TWACS Signal .................................................................................. 1800
Zongye Liu, Xiufan Ma, Junting Yang, Jin Li
Research on Gear-Box Residual Useful Life Prediction Based on Stochastic Filtering Model ......................... 1804
Shi-Jie Deng, Liwei Tang, Gui-Bo Yu, Jie Yang
Best Morlet Wavelet-Based Full Information Energy Entropy Extraction with Its Application to Rolling
Bearing Condition Monitoring ................................................................................................................................ 1808
Chun-Yu Zhao, Ping Ning, Bai-Yu Liu, Lei Wang, Xiang-Long Ni, Lun Ma
Current Progress on Weak Signal Detection .......................................................................................................... 1812
Jie Wang, Lu Yang, Long Gao, Qiang Miao
Remaining Useful Life Prediction of Gearbox Based on A Nonlinear State Space Model ................................ 1819
Guoyu Lin, Yunxian Jia, Lei Sun, Xin Liu,Wenquan Zhang
Design of Prognostic Circuit for Hot Carrier Injection Failure of Integrated Circuit....................................... 1823
Bin Wang, Yiqiang Chen, Yunfei En, Yun Huang, Yudong Lu
Residual Lifetime Prediction of A Vehicle Engine Using Fuzzy Similarity Analysis ......................................... 1827
Pingliang Cui, Zhisheng Zhang, Ruiyao Yang, Yu Liu, Hong-Zhong Huang
The Research of Unknown Weak Fault Signal Detection on The Duffing Oscillator With Hu Moment
Invariants ................................................................................................................................................................... 1831
Jie Li, Jianmin Zhao, Haiping Li
System Life Prediction Approaches Based on Key Apparatus ............................................................................. 1835
Hongyan Zhuo, Zhiqiang Liu, Xiao Jin, Fanbao Meng, Xiaoyan Hu
Fault Mode Analysis and Prediction of Space Deployable Articulated Mast Based on Gray Relation Theory
.................................................................................................................................................................................... 1838
Ming Hu, Dan-Min Huang, Wen-Hua Chen,Zong-Quan Deng
Research on Network Centric Based Remote Fault Diagnosis and Maintenance System to Vehicle Equipment
.................................................................................................................................................................................... 1843
Xiaosong Yang, Zhiping Gong, Shuo Wang, Jianhua Zhang
Application of Rao-Blackwellized Particle Filtering for Estimating Remaining Useful Life of Gearbox ........ 1846
Yun-Xian Jia, Lei Sun, Guo-Yu Lin,Wei-Guo Wang
Fault Diagnosis and Risk Control of Aircraft Electric System Based on IAHP and Bayesian Network .......... 1851
Chuang Yin, Liping He, Xing Wang, Hong-Zhong Huang
Process and Application of Equipment Battlefield Damage Assessment Based on Damage Tree .................... 1855
Haiying Ma, Feng Gao, Zhifeng Zhang
2-D Defect Profile Reconstruction from Ultrasonic Guided Waves Signals Adopting Fuzzy Wavelet Packet and
LS-SVM ..................................................................................................................................................................... 1858
Bing Liu,Liwei Tang
A Health Status Evaluation Based on Minimal Path About The Destruction Equipment of High-Risk
Hazardous Goods ...................................................................................................................................................... 1863
Hongyuan Zhang, Aizhi Hao, Hanlin Liao
Application of The Fault Tree Analysis Method in The Fault Diagnosis of Breechblock .................................. 1867
Jin-Hua Liu, Guang Tian, Xin-Jie Shao, Jing-Tao Zhou
Application of Dempster-Shafer Evidence Theory in Fault Diagnosis of Aero-Engine Gas Path ..................... 1871
Di Wen, Xue-Hai Wu, Dan Ling, Zhong-Zhe Chen, Haikun Wang
A Similarity-Based Remaining Useful Life Prognostic Approach of Equipment Components ........................ 1874
Cong-Ying Lei, Liang-Hua Xia, Bo Wu, Gang Liu
Analysis of Applying PHM in Equipment Maintenance ....................................................................................... 1878
Na Hu, Junjie Dong, Jingli Zhong, Long Chi, Rong He, Zhining Zhao
A Model to Predict The Residual Life of Aero-Engine Based upon Support Vector Machine ......................... 1880
Xue-Hai Wu, Di Wen, Run-Guo Li, Zhong-Zhe Chen, Hong-Zhong Huang, Zhiqiang Lv
Fuel-Stop Fault Diagnosis for Diesel Engine Based on Vibration Intensity ........................................................ 1883
Jin-Song Zhao, Xing-Hui Zhang, Hong-Wen Ma, Ming-Zheng Liu
Research on The Roller Bearing Fault Diagnosis Based on Morphological Wavelet and LSSVM Algorithm
.................................................................................................................................................................................... 1888
Xing Han, Jingqi Xiong, Rui Sun, Lili Wang, Xiaopin Qin
Regression Based Complex Equipment Prognostic and Health Management .................................................... 1893
Guoshun Chen, Gefang Wang, Wenbin Cao
Measurement Error Separation Based on EMD .................................................................................................... 1897
Wei Wang, Hai-Long Chen, Ying-Lie Dai
Research of Equipment Remaining Life Prediction Based on Flexible Process Management .......................... 1901
Jianxin Huang, Yaqin Bian, Shubin Li
Research on Damage Level Assessment Model Based on CGA-SVM ................................................................. 1906
Zhifeng You, Quan Shi, Xianglong Ni, Ning Ding
Trasient Dyamic Analysis of Crankshaft Torsinal Vibration for Reciprocating Piston Compressor .............. 1910
Shijie Wang, Jie Lu, Nan Zhao, Zengjin Xu, Yuan Li
A Study on Applications of Principal Component Analysis and Kernel Principal Component Analysis for
Gearbox Fault Diagnosis ........................................................................................................................................ 1917
Deng Pan, Zhiliang Liu, Longlong Zhang, Yinjiang Liu, Ming J. Zuo
Cost-Benefit Analysis of The Application of Prognostics and Health Management Technology .................... 1923
Bo Wu, Xisheng Jia, Lianghua Xia, Congying Lei, Yabin Wang
Study on The Application of Health Management Techniques in Aerospace Testing Software ....................... 1928
Weiqi Xie, Changping Dang, Jianwei Shi, Yuanwen Cai
Research on On-Line Testing of Faults of Gun Fire Extinguish Mechanism ..................................................... 1934
Zhanjie Yuan, Yanjiang Zhou, Guibo Yu, Shuhai Wang
End of Discharge Time Prediction for Li-ion Battery ........................................................................................... 1938
Zhenwei Zhou, Zhengyu Shi, Guo Ai, Yudong Lu, Yunfei En
Decision-Making Model for Ranking Battlefield Damaged Equipment Repairs Based on Multi-Criteria ...... 1942
Qiao Ma, Guibo Yu, Lijun Cao, Jinhui Zhao, Bing Feng
VII. Others
Technology Transfer and Efficiency Change in China’s High-Tech Industry ................................................... 1945
Feng Peng, Yanping Li
Scale-Free Property of Copying Model ................................................................................................................... 1949
Rongrong Dai, Zhenting Hou
Research on Iron and Steel Enterprise Customer Satisfaction Evaluation Based on Unascertained Theory . 1953
Xiang Wang, Ayong Li
Auxiliary Decision Support System Designing of Aircraft’s Initial Spares ......................................................... 1957
Boping Xiao, Linxia Lv, Ting Wang
Optimized Selection Method of Industry Chain and Its Application in Chemical Industrial Parks ................ 1962
Shukun Wang, Guohua Chen
Study on Spare Parts Resupply Model Based on Cost Restrictions ..................................................................... 1967
Xue Tao, Yun-Wen Feng, Xiao-Ming Dai, Zhong-Wei Guo, Bao-Shan Cai
Application Research of TRIZ in Maintainability Design .................................................................................... 1971
Chuan Lv, Mengying Zhang, Meihui Wang
Integrating Kano’S Model and Quality Function Deployment to Evaluate Exposition ..................................... 1976
Juan Bi, Xinli Wang
Corporate Life-Cycle, Corporate Governance and Investment Efficiency ......................................................... 1980
Fangfei Ding, Lulu Zhang
The Application of Motion Capture System and Virtual Simulation Software in Virtual Maintenance ......... 1986
Baocheng Liu, Yongxiang Li, Dong Zhou
Study on Cross-Border M&A Performance of China Construction Bank Based on The Factor Analysis ...... 1989
Bai Xue
Reactive Power Capabilities of DFIG-Based Wind Park for Low-Voltage Ride-Through (LVRT) Performance
.................................................................................................................................................................................... 1992
Yang Han
Managers’ Overconfidence, Financing Decision-Making and Company Performance ..................................... 1997
Ling Liu, Yanxi Li, Kejing Chen
Project Management in Development of IETMS for Aviation Equipments ....................................................... 2001
Weiwei Jiang, He Yin, Jin Yan, Xueqiao Hou, Liang Zhang
Modeling and Analysis of Folding Arm Aerial Platform Vehicle Considering The Flexible Foundation ........ 2005
Xianglong Zeng, Jingqi Xiong, Xiaopin Qing, Xing Han, Fuliang Wang
Application Research of Cold Rolling Gears for Small Module Involute Spline Shafts .................................... 2010
Hongping Yu, Li Mo, Yilong Gong
Photovoltaic Grid Simulation and Harmonic Analysis ......................................................................................... 2014
Xiao-Ming Huang, Wen-Bing Lu, Jin Li
Three-Dimensional Numerical Simulation for Shaped Charge Jet Penetrating into Target............................. 2018
Xingyong Gao, Guoqing Liu, Yuling Zhang
Research on The Operational Condition Evaluation of ATC Automation System ............................................ 2022
Rui Li, Zili Zhou
Economic Analyses of Business Models on Agriculture Industrialization .......................................................... 2026
Haizi Wang, Shibin Zhang, Juan Liu
Measurement of ESD protection structure irradiation degradation using TLP method ................................... 2029
Qian Shi, Qing-Zhong Xiao, Yuan Liu, Yun-Fei En
Performance Analysis of Target Acceleration Resolution for Radar Based on Ambiguity Function ............... 2031
Hanbing Hua, Jianxin Wang, Tian Ban
A Kind of Embedded System Development Method Based on C# ....................................................................... 2035
Huiyu Yang, Junjie Zhao, Yishan Zhang, Qingdong Ma
Far-Field Measurement of Phased Array Multi-Beam Antennas Based on The Airship .................................. 2039
Nai-Ping Cheng, Xiao-Jie Dou, Shu-Yan Ni, Yu-Fei Ren
An Improved Variable Step-Size Affine Projection Algorithm for Narrowband Interference Suppression in
DSSS Systems ............................................................................................................................................................ 2043
Lai Ping, Ruimin Lu
A Novel Trust Model Based on Probability and Statistics for Peer to Peer Networks ....................................... 2047
Haimei Xu, Yulin Liu, Shouqing Qi, Yanjun Shi
Design and Realization of MDA-Based Signal-Oriented Instrument Drivers .................................................... 2051
Xiang-Bing Sun, Fu-Jun Liu, Gong-Min Tang
A New Ant Colony Optimization Algorithm for TSP ............................................................................................ 2055
Xiwu Wang, Yongxin Wang, Yinlong Wang, Yican Jin
Research of Fractional Order Chaotic System Based on Time-Frequency Domain Method ............................ 2058
Xiaodan Liu, Ping Yang, Zhisheng Zhang, Yongxin Wang
Support Vector Machine Radar Emitter Identification Algorithm Based on AP Clustering............................ 2062
Weihua Xiao, Hongchao Wu, Chengzhi Yang
Research on The Present Situation and Countermeasures in Management of Dangerous Chemical .............. 2065
Quanmin Bu, Jun He
The Implementation of Multi-Micro-Controller Communication System Based on RF1100 Wireless Module
.................................................................................................................................................................................... 2070
Xunlai He, Huiyong Deng, Jiuhe Ma, Yanbin Zhang
Study on Fire Temperature Characteristics in Closed Cabin .............................................................................. 2074
Feng Yang, Jinyun Pu, Qixiu Li
Stability of Positive Solutions of An N-Patch Predator-Prey System with Random Perturbation ................... 2078
Hailong Gao, Yanqiu Li
A Critical Analysis of Outsourcers’ Behaviorization of Moral Hazards ............................................................. 2081
Fuyuan Zhang, Bin Geng, Zhanling Liu, Jinna Jia
The effect of Different Length-To-Diameter Ratio of Charge in EFP Shaping .................................................. 2085
Hang Liu, Hongqiang Gu, Quan Shi, Xianming Shi, Chuang Gu
Analysis of Hardware Security for Cryptographical Module .............................................................................. 2088
Haitao Sun, Jie Liu, Deqing Xue
Analysis on Arc-Welding Robot Visual Control Tracking System ...................................................................... 2091
Heping Cui, Zhenhua Xiao, Junjie Dong, Yayun Chen, Guojiang Hou, Zhining Zhao
Kinematics Simulation of PMT Based on ADAMS and Pro/E ............................................................................. 2095
Xiaogang Jia, Zhenhua Xiao, Junjie Dong, Daiqiang Wei, Long Chi, Na Hu
Analysis and Simulation of Affect Factors on Operational Readiness of Materiel ............................................. 2098
Bobiao Yu, Tailiang Song, Qinqin Wang
Civil-Military Integration Precision Support ......................................................................................................... 2103
Chen Liu, Lin Zhang, Jianxin Huang, Hong Wang
Parameter Analysis of One Dimensional DifferentialEquation with Delay by Fixed a<0 ................................. 2107
Ai Gao
Application of Laser Interferometry in Micro ThrustMeasurement ................................................................... 2111
Hao Chang, Xing Jing
Technology Readiness Assessment Approach Based on Close Degree ................................................................ 2113
Weigang Chen, Woye Liu, Jing Wang, Weimin Ye, Fei Han
Method to Guide Aircraft from Downwind to Final Leg Based on Complexity Map ........................................ 2118
Yifei Zhao, Jian Yang, Hongyong Wang
On Translator’s Initiatives from The Perspective of Motivation ......................................................................... 2123
Qin Guo
Analysis on Features of Advertising English from Perspective of Aesthetic Rhetoric ....................................... 2126
Jing-Wei Shu, Lin Wang
Investigation on The Population Density in A Underground Shopping Mall of A University .......................... 2129
Guomin Zhao
Research on An Index System for University Library Knowledge Service Quality Assessment ...................... 2133
Jijun Zhang, Jinbo Yao, Donghang Zhai
Informatization Construction and Development of Procuratorial Organizations ............................................. 2137
Yuan-Yuan Li, Hao Jin, Jin Hui
TIC: A Methodology for The Construction of E-Commerce ................................................................................ 2142
Jing-Chun Zhang, Jin-Rong Guo, Wei Su, Yan-Xu Dou
Study on The Application of Information Technology in Enterprise Risk Management .................................. 2146
Lingju Li
Discussion on Credit Risk Forecasting of Industries with Fraud Sales ............................................................... 2151
Ruicheng Yang, Qiang Lv, Zhuang Jin
Evaluation of The Producer-Consumer Problem .................................................................................................. 2155
Jing-Chun Zhang, Jin-Rong Guo, Wei Su, Yan-Xu Dou
The Use of SLP Method in Function Area Distribution of Market Town ........................................................... 2159
Huang Li
Sensory Integration Training Theory to Primary School Physical Educantion ................................................. 2163
Lifeng Dong
Strong Law of Large Numbers and Growth Rate for NOD Sequences ............................................................... 2167
Songlin Ma, Weicai Peng