Vehicle Specs: 4” AirRide Lift Kit, 35x12.50 Atturo M/T, 20x9 M/T Sidebiter

2013-2017 DODGE RAM 1500

W/ AIR RIDE 4WD

2013-2017 DODGE RAM 1500 4WD TRUCK - AIR RIDE ONLYLIFT & METHOD QTY PART# DESCRIPTION RECOMMENDED ACCESSORIES NOTES4" Front / 2.5" RearIFS SystemFactory Air Ride SuspensionKit# 1623H 42DK8802

111112

02263002263102240302262502225985719

Front Box Kit 1 of 4Front Box Kit 2 of 4Front Box Kit 3 of 4 - Air RideFront Box Kit 4 of 4Rear Air Ride Box KitRear NX2 Shock

98224712 FOX 2.0 Rear Gas Shock (2 req’d) 1234567

Notes1. The rack and pinion steering system is extremely sensative to an out-of -round or out-of-balance tire/wheel combinations.2. Fits factory air ride equipped trucks only.3. The factory air ride is a closed loop system. Opening the system more times than recommended in the lift instructions or factory service manual will require the system to be recharged. This can be done at any

Ram dealer service department.4. Stock 20” wheel can be reinstalled with factory sized tire only. Stock 17” and 18” wheels will not fit5. This kit is FMVSS No.126 Compliant6. Not for use on Ram Rebel7. Will fit Eco Diesel models

4” KIT FEATURESThe lift system utilizes the base components from the popular 4” suspension system. This includes 1/4” thick steel laser cut front and rear crossmembers, differential skid plate, ductile cast iron steering knuckles, differential drop brackets and sway bar link extensions.

In order to accommodate for the full height range of the adjustable suspension, front replacement brake lines are also included.

In the rear, upper control arm relocation brackets, track bar relocation bracket and sway bar links are included. This new system uses front and rear air bag spacers to maintain the proper position and function of the factory air bags. All necessary air line fittings and hardware are included.

4” Lift Kit shown with optional FOX 2.0 Series Shocks

Vehicle Specs: 6’’ lift kit – 35’’ Nitto Mud Grapplers – 20’’ American Outlaw Hollywood

2013-2017 DODGE RAM 1500 4WD

2013-2017 DODGE RAM 1500 4WD TRUCKLIFT & METHOD QTY PART# DESCRIPTION RECOMMENDED ACCESSORIES NOTES4" Front / 2" RearIFS System (Strut Spacer)Rear Coil SpacerKit# 670H 02DK6202

111112

02263002263102240202262502220985758

Front Box Kit 1 of 4Front Box Kit 2 of 4Front Box Kit 3 of 4Front Box Kit 4 of 4Rear 2" Box KitRear NX2 Shock

98224758022309

FOX 2.0 Rear Gas Shock (2 req’d)Rear 3” Coil Box Kit

12346

6" Front / 3" RearIFS System (Strut Spacer)Rear Coil SpringKit# 671H01DK0222FOX Performance C/O SystemKit# 671F 72DK9014

11111122

022630022631022624022625022309883020738575998224759

Front Box Kit 1 of 4Front Box Kit 2 of 4Front Box Kit 3 of 4Front Box Kit 4 of 4Rear 5" Box KitFOX 2.5 Coilover KitRear NX2 Shock orFOX 2.0 Rear Gas Shock

98224758022309 85758 98224758

FOX 2.0 Rear Gas Shock (2 req’d)Rear 3" Box Kit Rear NX2 Shock (2 req’d) orFOX 2.0 Rear Gas Shock (2 req’d)

123456

Notes1. Be sure to measure your vehicle before ordering. Tail height on these trucks vary from 1"-3" from the factory. The

022209, 022309, and 022509 can all be substituted to achieve the desired stance.2. Rack & Pinion steering system is extremely sensitive to any out of round or out of balance tire/wheel combination.

The larger the tire the less the backspacing, the more sensitive the system, causing minor steering wheel shimmy.3. Not recommended for AWD models.4. Stock 17" and 18" wheels can not be re-installed. Stock 20" can be reinstalled with factory tire.5. TRX models will achieve approximately 1" of additional lift. This lift is not recommended for use on the TRX models

due to possible CV shaft vibration caused by the additional lift. Instead, consider our 4" lift system for 5" of lift or replace the TRX struts with standard struts for use with this system.

6. Will not fit adjustable air suspension equipped models.

ATTENTION: MEASURE YOUR TRUCK FIRST! Tail height on ‘09-15 Rams will vary from 1’’-3’’ from the factory. Use #022209 (2’’), #022309 (3’’), or #022509 (5’’) rear box kit to

achieve desired stance.

}When using 3” Coil Box Kit

6" KIT FEATURES• 1/4" Laser cut crossmembers with high clearance design• Differential skid plate included for offroad protection• 3-Point differential drop for proper drive line angles• Rear ProRide Coils• Front Kevlar lined stainless steel brake lines included• Upper strut spacer included to maintain factory ride quality

6” Lift Kit shown with optional FOX 2.0 Series Shocks

#88302073 - FOX 2.5 Coilover Kit