20 ha wd

1
Lounge Hall Kitchen / Dining Kitchen Conservatory Garage Lounge Hall Kitchen / Dining Garage Kitchen Family Area Currently shown as a canopy over. Soil pipe in high level boxing WC Utility Flat ceiling over utility with 2 layers 150mm cross laid insulation quilt to roof space with insulated loft hatch. 100mm step down to garage Extractor Extractor Extractor UTILITY EXTRACTOR Mechanical extractor min air FKDQJH OWUVVHF ZLWK PPð background ventilation Boiler Glazing N1 Safety glass to BS6206 to be provided to any glazing within 800mm of floor level, any glazing in doors within 1500mm of floor level and any glazing in side panels within 1500mm of floor level. Velux PO8 GGU 0059 Velux PO8 GGU 0059 Velux PO8 GGU 0059 WC EXTRACTOR Mechanical extractor 6ltrs/sec air change with 15min overrun KITCHEN EXTRACTOR Mechanical extractor min air FKDQJH OWUVVHF ZLWK PPð background ventilation Ex window to be blocked up Part P Electrics Electrics to be installed or certified by Part P Electrician RWP & BIG BIG RWP & BIG Currently shown as a canopy over. ROOF CONSTRUCTION 100 x 50mm treated sw wallplate strapped to wall 225 x 50mm C16 hip rafters 200 x 50mm ceiling chords over garage and utility [ PP WUHDWHG VZ & UDIWHUV # DW PP FWUV Rafters to be doubled up adjacent to roof light opening Roof light opening to be trimmed with 200 x 50mm timbers 30 x 5mm ms restraint straps at 2m max ctrs Flat section of roof below landing window lined with 18mm marine ply and covered with code 4 lead laid to fall away from wall. Foundations to have min 600mm min cover and be taken down to a depth agreed on site with LABC. Any existing drains passing under extension shall be inspected for integrity and replaced where necessary. Drains to be encased in 150mm concrete. Where drains pass through sub walls a concrete lintel shall be provided over. Floor to comprise 150mm concrete slab on separation layer on 100mm Kingspan Kooltherm K3 insulation providing a 89DOXH RI :Pð. RQ J '30 RQ PP ZHOO compacted selected hardcore SVP boxing to be filled with glassfibre insulation quilt and finished with 12.5mm Soundbloc platerboard. New walls to comprise 100mm facing bricks, 50mm clear cavity, 50mm Kingspan Kooltherm K8 insulation with 100mm medium density blockwork giving 8YDOXH RI :Pð . All structural steel beams to be encased with 2 layers 12.5mm pbd and skim to provide 1hr fire resistance. Use Sandtoft 20/20 tiles on sarking felt on 18mm sarking board with 75mm Kingspan Kooltherm K7 between rafters maintaining 50mm ventilation space between insulation and underside of sarking board. Rafters to be battened out to accommodate insulation and finished with 62.5mm Kooltherm K18 insulated plasterboard providing a U-Value RI :Pð. KITCHEN FAMILY ROOM Velux PO8 GGU 0059 NORTH Project Title Job No. Drawn By Drawing No. Checked By Revision Drawing Title Scale Authorised By Date Date Date Original Sheet Size A1 Do Not Scale From This Drawing Rev. Description Drawn Date 16 Pilch Lane East, Huyton, Merseyside, L36 4HZ T: 07799 061950 E: [email protected] W: nmwdesign.weebly.com This drawing is the copyright of NMW Design. It must not be reproduced or used in any form without the express written permission of NMW Design. All dimensions to be checked on site prior to commencement of any works. Do not scale from this drawing only use written dimensions. The contractor is to verify all dimensions, heights and levels prior to commencement of work. Any discrepancies are to be reported immediately to NMW Design. No encroachment is to be made onto any neighbouring property without obtaining the written permission of the neighbour. The contractor shall visit the site and familiarise himself with the project prior to preparing his estimate. He shall allow in his price for any detail whether indicated or not which may be reasonably considered necessary to ensure a neat and structurally sound and workmanlike job. The contractor shall issue all statutory notices to the Local Authority prior to commencement, during progress and completion of the works. - Typical new wall insulation detail Existing Rear Elevation Existing Side Elevation Existing Front Elevation Proposed Rear Elevation Proposed Side Elevation Proposed Front Elevation Existing Ground Floor Plan Proposed Ground Floor Layout Proposed Garage, Utility, WC & Kitchen Family Room Extension Proposed Plans & Elevations 1/50 NMWard 01/13 Mr & Mrs N Isherwood 20 Heathmoor Avenue Lowton 20HA/WD01 1/100 Proposed Roof Plan Typical Section Through Location Plan (1/1250)

Upload: nmw-design

Post on 16-Jul-2015

85 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: 20 ha wd

LoungeHall

Kitchen / Dining

Kitchen Conservatory

Garage

LoungeHall

Kitchen / Dining

Garage

Kitchen

Family Area

Currently shown as

a canopy over.

Soil pipe in high level boxing

WC

Utility

Flat ceiling over utility with 2

layers 150mm cross laid

insulation quilt to roof space with

insulated loft hatch.

100mm step down to garage

Extractor

Extractor

Extractor

UTILITY EXTRACTOR

Mechanical extractor min air

change 30ltrs/sec with 4000mmĮ

background ventilation

Boiler

Glazing N1

Safety glass to BS6206 to be provided to any

glazing within 800mm of floor level, any glazing in

doors within 1500mm of floor level and any glazing

in side panels within 1500mm of floor level.

Velux PO8

GGU 0059

Velux PO8

GGU 0059

Velux PO8

GGU 0059

WC EXTRACTOR

Mechanical extractor

6ltrs/sec air change with

15min overrun

KITCHEN EXTRACTOR

Mechanical extractor min air

change 30ltrs/sec with 4000mmĮ

background ventilation

Ex window

to be blocked up

Part P Electrics

Electrics to be installed or certified by Part P Electrician

RWP &

BIG

BIG

RWP &

BIG

Currently shown as

a canopy over.

ROOF CONSTRUCTION

100 x 50mm treated sw wallplate strapped to wall

225 x 50mm C16 hip rafters

200 x 50mm ceiling chords over garage and utility

200 x 50mm treated sw C16 rafters @16Á at 400mm ctrs

Rafters to be doubled up adjacent to roof light opening

Roof light opening to be trimmed with 200 x 50mm timbers

30 x 5mm ms restraint straps at 2m max ctrs

Flat section of roof below landing

window lined with 18mm marine

ply and covered with code 4 lead

laid to fall away from wall.

Foundations to have min 600mm min

cover and be taken down to a depth

agreed on site with LABC. Any existing

drains passing under extension shall be

inspected for integrity and replaced

where necessary. Drains to be encased

in 150mm concrete. Where drains pass

through sub walls a concrete lintel shall

be provided over.

Floor to comprise 150mm concrete slab on separation layer

on 100mm Kingspan Kooltherm K3 insulation providing a

U-Value of 0.17W/mĮK on 2000g DPM on 150mm well

compacted selected hardcore

SVP boxing to be filled with

glassfibre insulation quilt and

finished with 12.5mm

Soundbloc platerboard.

New walls to comprise 100mm facing

bricks, 50mm clear cavity, 50mm

Kingspan Kooltherm K8 insulation with

100mm medium density blockwork giving

U-value of 0.27W/mĮ ÁK.

All structural steel beams to be

encased with 2 layers 12.5mm pbd and

skim to provide 1hr fire resistance.

Use Sandtoft 20/20 tiles on sarking felt on

18mm sarking board with 75mm Kingspan

Kooltherm K7 between rafters maintaining

50mm ventilation space between insulation

and underside of sarking board. Rafters to

be battened out to accommodate insulation

and finished with 62.5mm Kooltherm K18

insulated plasterboard providing a U-Value

of 0.18W/mĮK.

KITCHEN

FAMILY

ROOM

Velux PO8 GGU 0059

NORTH

Project Title

Job No.

Drawn By

Drawing No.

Checked By

Revision

Drawing Title

Scale Authorised By

Date Date Date

Original Sheet Size A1 Do Not Scale From This Drawing

Rev. Description Drawn Date

16 Pilch Lane East, Huyton, Merseyside, L36 4HZ

T: 07799 061950 E: [email protected]

W: nmwdesign.weebly.com

This drawing is the copyright of NMW Design. It must not be reproduced or used in

any form without the express written permission of NMW Design.

All dimensions to be checked on site prior to commencement of any works.

Do not scale from this drawing only use written dimensions.

The contractor is to verify all dimensions, heights and levels prior to

commencement of work.

Any discrepancies are to be reported immediately to NMW Design.

No encroachment is to be made onto any neighbouring property without obtaining

the written permission of the neighbour.

The contractor shall visit the site and familiarise himself with the project prior to

preparing his estimate. He shall allow in his price for any detail whether indicated or

not which may be reasonably considered necessary to ensure a neat and

structurally sound and workmanlike job.

The contractor shall issue all statutory notices to the Local Authority prior to

commencement, during progress and completion of the works.

-

Typical new wall insulation detail

Existing Rear Elevation Existing Side Elevation Existing Front Elevation

Proposed Rear Elevation Proposed Side Elevation Proposed Front Elevation

Existing Ground Floor Plan

Proposed Ground Floor Layout

Proposed Garage, Utility, WC &

Kitchen Family Room Extension

Proposed Plans & Elevations

1/50

NMWard

01/13

Mr & Mrs N Isherwood

20 Heathmoor Avenue

Lowton

20HA/WD01

1/100

Proposed Roof Plan Typical Section Through

Location Plan (1/1250)