2 inch high power dome squawker loudspeaker on

2
AD02110/Sq_ _- ,.IA 2 inch HIGH POWER DOME SQUAWKER LOUDSPEAKER APPLICATION For use in hi-fi enclosures. This loudspeaker has a very wide radiating pattern due to its nearly flat conical front. TECHNICAL DATA version Sq4 Sq8 4 8 on 3,4 6,9 on 340 360 Hz 550 to 5000 Hz 30 W 30 W 60 W 4 W 4 V 5,6 V 205 mJ 0,9 T 3 mm 3,3 mm 50 mm ceramic . 102 mm 0,35 kg 1 kg Rated impedance Voice coil resistance Resonancefrequency Rated frequency range Power handling capacity," loudspeaker mounted on I EC baffle, measured with filter 36/J-F - 1,2 mH 18/J-F - 2,4 mH Maximum power on loudspeaker Operating power Sweep voltage (100 to 10000 Hz, filter 36 /J-F- 1,2 m H 18 /J-F- 2,4 mH) Energy in air gap Flux density Air-gap height Voice coil height Core diameter Magnet material diameter mass Massof loudspeaker The loudspeaker has a textile dome and an acoustically sealed pot. No isolation is required. Connection to the squawker by means of 2,8 mm (0,11 inch) tag connectors or by soldering. AVAILABLE VERSIONS AD02110/Sq4, catalogue number 2422 257 32221 I these numbers apply to bulk packed loudspeakers, AD02110/Sq8, catalogue number 2422 257 32222 J minimum packing quantity 8 per unit. FREQUENCY RESPONSE CURVES (see Fig. 2) Measured in anechoic room, loudspeaker mounted on IEC baffle at operating power. Above 500 Hz the sound pressure may not deviate more than ± 1 d8. Curve a: Sound pressure. Curves d2 and d3: 2nd and 3rd harmonic distortion . Measuring according to DIN 45573 par. 3.2. September 1985 41

Upload: others

Post on 03-Nov-2021

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 2 inch HIGH POWER DOME SQUAWKER LOUDSPEAKER on

AD02110/Sq_

_-·,.IA

2 inch HIGH POWER DOME SQUAWKER LOUDSPEAKER

APPLICATION

For use in hi-fi enclosures. This loudspeaker has a very wide radiating pattern due to its nearly flatconical front.

TECHNICAL DATA versionSq4 Sq8

4 8 on3,4 6,9 on340 360 Hz

550 to 5000 Hz

30 W30 W

60 W

4 W

4 V5,6 V

205 mJ

0,9 T

3 mm

3,3 mm

50 mm

ceramic. 102 mm0,35 kg

1 kg

Rated impedance

Voice coil resistance

Resonancefrequency

Rated frequency range

Power handling capacity," loudspeaker mountedon IEC baffle, measured with filter

36/J-F - 1,2 mH18/J-F - 2,4 mH

Maximum power on loudspeaker

Operating power

Sweep voltage (100 to 10000 Hz, filter 36 /J-F- 1,2 mH18 /J-F- 2,4 mH)

Energy in air gap

Flux density

Air-gap height

Voice coil height

Core diameter

Magnet materialdiametermass

Massof loudspeaker

The loudspeaker has a textile dome and an acoustically sealed pot. No isolation is required. Connectionto the squawker by means of 2,8 mm (0,11 inch) tag connectors or by soldering.

AVAILABLE VERSIONS

AD02110/Sq4, catalogue number 2422 257 32221 I these numbers apply to bulk packed loudspeakers,AD02110/Sq8, catalogue number 2422 257 32222 J minimum packing quantity 8 per unit.

FREQUENCY RESPONSE CURVES (see Fig. 2)

Measured in anechoic room, loudspeaker mounted on IEC baffle at operating power. Above 500 Hz thesound pressure may not deviate more than ± 1 d8.Curve a: Sound pressure.Curves d2 and d3: 2nd and 3rd harmonic distortion .

• Measuring according to DIN 45573 par. 3.2.

September 1985 41

Page 2: 2 inch HIGH POWER DOME SQUAWKER LOUDSPEAKER on

AD02110/Sq.AD02110/Sq.2 Inch high power dome squawker loudspeaker

1Z78130 1

100r--t~---t-+-t~rttt--+-~--+-+-+i-ttt~-+~I~im~iu--.~,-+-+4-~~--~~ - - _ •..•. P •• ~.- •••• _./N

0'0+III

'yd8

/o~N

/

80r--t--r--f--~rt-rttv--t--r--f--r-rt-rttr--t--r--f--~rt~bH~/-"~~

70N "e0' E+1 N

'" ..•.~ ~0 0 80

1/

d3 '\.' d21/"

/V (,1/ 't. I ..

50 100 200 500 Hz

...:Fig. 2.

:: IIII------------ __ ON? ,N

~Ill"r-----------~~-- _

"'."--------.,." ---------~E

cO0.~c:c:0o5/IIIs:a..~L-

" EgE 1!,.,

S! III

E EN

~N-L- III

2i >-

'"., .0E "0III 2i:0 III., U

0 :0s: .s., ..s: OlIII !!l

CD .,z, c

0

EE.s..c.~c.,E

i:S

September 1985 'I( September 1985 43