2 020 product catalog - optipure water · 2019. 12. 9. · 4 minerals – that are dissolved in...

Foodservice Filtration System Application Guide

2020 PRODUCT CATALOG

www.optipurewater.com2

FILTERTRAK

Filtertrak is an online application that enables low maintenance service and filter monitoring of water treatment systems, ensuring customers get the full performance of their system. Attributes of FilterTrak include:

• Tracks all information regarding each individual system including automatic reminders and shipments to monitor filter performance

• Monitors compliance with filter replacement to allow management teams to review site records via the web or by custom reports

• Adjusts for seasonal peak periods to provide the most accurate filter analysis

FilterTrak’s proprietary cartridge tracking software program maximizes consumables revenue and gives your customers peace of mind.

FilterTrak manages timely, proper filter replacement which:

• Reduces maintenance

• Improves operating efficiency

• Assures the quality of ice, beverages and steam generating systems

For more information on FilterTrak, please email OptiPure [email protected] or contact one of our foodservice master distributors.

© OptiPure3

TABLE OF CONTENTS

TECH

NOLO

GIE

SAP

PLIC

ATIO

NS A

ND P

RODU

CTS

SYSTEM SELECTION GUIDE 4 – 5

TREATMENT TECHNOLOGY GUIDE 6

FX OR QT SYSTEMS 7

SUPP

ORT

INDEX 36 – 38

GLOSSARY 35

WARRANTY INFORMATION 39

COMPETITIVE CROSS REFERENCE GUIDE 30 – 31

ICE MAKER APPLICATIONS - QT & FX 12 – 13

MULTI POINT APPLICATIONS 19

OFFICE WATER & COFFEE 28 – 29

STEAM APPLICATIONS 20 – 21

REVERSE OSMOSIS SYSTEMS 22 – 24

WAREWASHING/SOFTENING 25

FOUNTAIN BEVERAGES - QT, FX & CR 8 – 11

MISCELLANEOUS PARTS & KITS 34

MISCELLANEOUS PRODUCTS 32 – 33

OZONE SYSTEMS 27

FOOD SAFETY 26

ESPRESSO APPLICATIONS 16 – 17

COFFEE APPLICATIONS 14 – 15

TEA APPLICATIONS 18


Minerals – That are dissolved in water.

Sediment – Dirt and other suspended particulate matter.

Taste & Odor – Caused by chlorine and other chemicals.

SYSTEM SELECTION GUIDE

As described above, most water-related problems are caused by two basic characteristics:

1. A tendency to form scale – impacts equipment operating efficiency and condition.2. An offensive taste or odor – impacts beverage quality.

A common cause of offensive taste and odor is chlorine and its by-products. Scale comes from naturally occurring minerals in the water commonly referred to as water hardness. It is essential to understand the chemical characteristics of your water to select the best treatment technology for an application and avoid expensive water-related equipment problems. You may be already familiar with the characteristics of your water, but if not, here are a couple of simple ways to learn about it:

Contact your water company and ask for the most recent water quality report.

To find out what is in your water, OptiPure offers water testing kits that include a basic water test, H2O Test Express Kit, and a more extensive test, the Watercheck -OP Water Test through an independent laboratory. See page 34 for more information or ask your dealer, distributor or representative about testing choices.

STEP 1 Three categories of contaminants cause the majority of the problems in food service applications.

STEP 2 Know the basic characteristics of your water.

It is important to select the right water treatment system so that you get the benefits you expect. This guide will help you understand the primary considerations when selecting the best filtration for your needs.

Minerals

70%

20%10%

Sediment

Taste & Odor

Minerals70%20%

10%

Sediment

Taste & Odor

Equipment

Beverages

Scale – the #1 water-related equipment problem, caused by dissolved hardness minerals. It is important that the system you choose includes the right technology to protect your equipment against water ‘hardness’. Equipment most susceptible to scale problems include:

Combi Ovens – Steamers – Ice Makers – Espresso MachinesCoffee & Tea Brewers – Hot Water Dispensers

Taste and Odor – caused primarily by chlorine and a range of organic substances can ruin beverage quality and consistency. It is important that the system you choose deals with taste and odor reduction. Equipment most susceptible to these problems include:

Fountain Beverages – Ice Makers – Drinking WaterCoffee & Tea Brewers – Espresso Machines

© OptiPure5

SYSTEM SELECTION GUIDE

Water treatment is not a mystery – Virtually all water treatment systems for food service applications utilize one or more of five basic water treatment technologies. The challenge is to choose the right technologies to deal with particular contaminants in order to create a desired result.

OptiPure offers a choice of system styles to meet any need. Description of systems on page 7.

FX = “Drop-In” QT = “Qwik-Twist”

Go to your application in the catalog and select the system that meets your requirements.System recommendations are based on typical water usage for a six-month period between filter changes. Formulas for calculating your actual water usage are provided for most applications. NOTE: Different OptiPure technologies may be recommended for the same general application (e.g. “Steam”), because of differences in steam equipment

design. The amount of hardness minerals in the water can also influence system selection. Detailed information about specific equipment applications such as Ice

Makers, Combi Ovens, Espresso Machines and Combination Systems are available at OptiPureWater.com.

Additional important information listed for each system to help you with your selection includes: — Rated Capacity (Gallons or Liters) — System Flow Rate — Replacement Cartridges

Confirm your choice of systems by answering two final questions:

1. Are the right technologies applied for each application?2. Will the system capacity meet or exceed the actual water usage for the period between filter changes?

Water chemistry is complex, and there are many chemical interactions that can influence quality. The recommendations made in this catalog are proven guidelines that are for most applications. Recommendations vary based upon water quality and application specifics. If you have unusual or difficult water problems, discuss them with your dealer or call OptiPure directly. We can provide solutions for any food service water treatment need.

Five basic water treatment technologies are utilized in food service water treatment systems. STEP 3

Choose the system style that meets your needs. STEP 4

Select the right system for your application. STEP 5

Water Treatment Technology How It Works

Water Treatment Performance

Mechanical Filtration Suspended particulates are trapped by media. Removes dirt and sediment

Activated Carbon Reduces chlorine and by adsorption, offensive tastes and odors are reduced. Reduces chlorine, taste and odor

Scale InhibitorInhibitor media interferes with hardness minerals to reduce the potential for scale formation.

Inhibits scale formation

Ion Exchange (Softening)Water flows through charged resin where mineral ions are exchanged e.g. calcium & magnesium are exchanged for sodium.

Takes out hardness minerals

Membrane Separation (Reverse Osmosis)

A separation process that removes total dissolved solids.Removes a broad range of minerals and contaminants

Here are the five technologies, the water characteristics they deal with and the benefits they produce.


TECHNOLOGY GUIDE

Mechanical FiltrationOften referred to as “pre” or “sediment” filters, mechanical filters are designed to trap and hold particulate matter (not dissolved) in water down to a specific size or micron. Various QT and FX filtration systems include a pre-filter to protect primary filters against premature plugging from water sources with excessive dirt and sediment. Pre-filtration systems are also available for applications where dirt and sediment levels become problematic with existing systems.

Mechanical Filtration and Activated CarbonThe media structure of OptiPure CTO and XTO cartridges is composed of millions of fibers coated with powdered activated carbon (PAC). The high mass of PAC and the depth structure of these cartridges provides exceptional nominal particulate filtration and chlorine, taste and odor reduction.

Scale Inhibitor TechnologiesIsoNet® (Patented) adds inhibitor media into the water which interferes with the ability of hardness minerals to crystallize and create scale. IsoNet® also utilizes a corrosion inhibitor to protect metal surfaces.

ScaleX2 uses “template-assisted-crystallization” to inhibit calcium carbonate from forming scale. ScaleX2 adds nothing to the water.

Ion Exchange (Softening)OptiPure uses strong acid cation (SAC) softening resin to remove 100% of hardness minerals from water by exchanging calcium and magnesium ions for sodium ions. Only hardness minerals and some forms of iron are removed. Systems are available in the QT and FX style with a range of capacities. OptiSoft softeners are self-regenerating for high capacity/high flow applications.

Membrane Separation (Reverse Osmosis)Unlike filtration, membrane separation is a process where contaminants rejected by the membrane are continually flushed away. Pure water molecules pass through with ease, while >95% of impurities are rejected by the membrane.

WATER TREATMENT SYSTEM PERFORMANCE WITH OPTIPURE

Removes dirtand sediment

Reduces chlorinetaste and odor

Inhibits scale

formation


Removes a broadrange of minerals andother contaminants




Inhibits scale

formation






Inhibits scale

formation






Inhibits scale

formation






Inhibits scale

formation



PolyTrix Pre-Filters – are U.S. made thermally bonded, gradient-density, depth filters. PolyTrix offers greater dirt-holding capacity and high efficiency micron ratings. PolyTrix is used in OptiPure NSF Certified Systems.

CTO, CTOS, and XTO – cartridges contribute to the exceptional performance and capacity of OptiPure Systems.

OptiSoft, QTSFT, EM and FXWS – take out hardness minerals and iron. QTSFT-3+ and OS systems allow the user to blend in a desirable amount of hardness minerals.

OptiPure OP and BWS – utilize reverse osmosis and include blending and mineral-addition features to manage TDS and achieve a favorable mineral balance.

ScaleX2 – instantly transforms dissolved calcium carbonate ions into microscopic particles that become suspended in solution greatly reducing the potential for scale formation.

IsoNet – ensures consistent dosing by trapping and holding scale and corrosion inhibitor media within the water flow path of the OptiPure cartridge.

© OptiPure7

QT OR FX GUIDE

QT= Qwik-TwistOptiPure QT Advantages • Filter replacement is quick and simple.

• No need to empty water from a sump or clean and sanitize before replacing the filter.

• OptiPure Multi-Point systems use all QT cartridges from beginning to end! (Details on page 19)

QT Systems use a Qwik-Twist cartridge – Simply discard the old cartridge and “Twist” in the replacement.

Point-Of-Use or Multi-Point?

FX Systems use Drop-In filter cartridges – The sump is re-used. Only the filter media is replaced.

FX= Drop-InOptiPure FX Advantages • Replacement cartridge cost per gallon is less than with quick-change filters.

• Generates less waste than metal or plastic quick-change filters. Only the drop-in media is discarded - Better for the environment.

• Based on performance, system cost is typically less than quick-change style systems.

Fountain Beverage

Coffee

Multi-Point – a filter system that includes multiple treatment technologies to meet the requirements of different equipment applications including fountain beverages, ice and coffee.

Point-of-Use – One filtration system provides the required treatment to connected equipment.

Fountain Beverage

Ice Maker

CoffeeIN

Non Treated Water


Replacement Cartridges

Foun

tain

Bev

erag

e Q

T

System Performance

Rated Capacity Flow Rates

Gallons Liters GPM LPM

Filtration Solution

System Part No. PricePrice

(Per Unit)Model Part No.Required

Qty.

QT-2 170-52020 $757.00 45,000 170,325 4.5 17 CTO-Q 300-05830 2 $116.00

QT-2+ 170-51005 $965.00 45,000 170,325 4.5 17 S5-Q 300-05802 1 $84.00 CTO-Q 300-05830 2 $116.00

QT-3 170-52030 $1,071.00 67,500 255,478 6.75 25.5 CTO-Q 300-05830 3 $116.00

QT-4 170-52035 $1,422.00 90,000 340,687 9.0 34 CTO-Q 300-05830 4 $116.00



Inhibits scaleformation



Water Treatment Technologies


Foun

tain

Bev

erag

e Q

T

System Performance



Filtration Solution



Qty.

QT5-1 160-52075 $129.00 6,000 22,712 .75 2.85 CTO-Q5 300-05803 1 $55.00

QT10-1 160-52009 $296.00 15,000 56,775 1.5 5.7 CTO-Q10 300-05828 1 $96.00

QT10-2 170-52019 $653.00 30,000 113,550 3 11.3 CTO-Q10 300-05828 2 $96.00

QT10-3 170-52029 $952.00 45,000 170,344 4.5 17 CTO-Q10 300-05828 3 $96.00

QT-1 160-52010 $327.00 22,500 85,162 2.25 8.5 CTO-Q 300-05830 1 $116.00

QT-1+ 170-52051 $511.00 22,500 85,162 2.25 8.5 S5-Q 300-05802 1 $84.00 CTO-Q 300-05830 1 $116.00







QT-1+Up to 75BIB/monthSingle Carbonatorwith SedimentPre-Filter

QT-3Over 150BIB/monthUp to ThreeCarbonators

QT-2Up to 150 BIB/monthOne or Two Carbonators

QT10-2Up to 100 BIB/monthSingle Carbonator

QT-2+Up to 150BIB/monthOne or Two Carbonatorwith SedimentPre-Filter

QT-1Up to 75 BIB/monthSingle Carbonator

FOUNTAIN BEVERAGE QT

QT-4Over 150BIB/monthUp to FourCarbonators

QT10-1Up to 50 BIB/monthSingle Carbonator

QT10-3Up to 150BIB/month,One or Two Carbonators

QT5-1For water coolers & low-flow waterdispensers

© OptiPure9

See selection guide pages 4-5 or visit www.optipurewater.com


Foun

tain

Bev

erag

e FX

System Performance



Filtration Solution



Qty.

FX-11 160-50010 $228.00 15,000 56,775 1.5 5.7 CTO-10 252-00210 1 $30.00

FX-12 160-50020 $281.00 30,000 113,550 3 11.3 CTO-20 252-00220 1 $50.00

FX-22 160-50025 $480.00 30,000 113,550 3 11.3 S5-20 252-00120 1 $20.00 CTO-20 252-00220 1 $50.00

FX-22P 160-50030 $700.00 60,000 227,100 6 22.7 CTO-20 252-00220 2 $50.00

FX-22P+ 160-50035 $913.00 60,000 227,100 6 22.7 S5-20 252-00120 1 $20.00 CTO-20 252-00220 2 $50.00







FOUNTAIN BEVERAGEQT FX

FX-11Up to 50 BIB/monthSingle Carbonator

FX-12Up to 100 BIB/monthOne or Two Carbonators

FX-22Up to 100 BIB/monthOne or Two Carbonatorswith SedimentPre-Filter

FX-22POver 100BIB/month,Two or ThreeCarbonators

FX-22P+Over 100BIB/month, Two or ThreeCarbonatorsw/pre-filter

Calculating usage for beverage system selection.

Add up the number of “bag-in-box” (BIB) used for all carbonated and non-carbonated beverages in a month and multiply times 25 to calculate monthly water usage. Estimate filtered drinking water dispensed from a post-mix valve or water fill station and add to calculate total monthly usage. Multiply total monthly water usage times 6 to calculate water usage over a six-month period.

Example:75 BIB/mo. x 25 gals. each = 1,875 gallons of water per month.1,875 + 500 gals. drinking water = 2,375 gallons per month.2,375 x 6 months = 14,250 gallons every 6 months.

Note: Actual water usage should not exceed system capacity.


FOUNTAIN BEVERAGE QT

QTC-1+Up to 75BIB/monthSingle Carbonatorwith Sediment Pre-Filter

QTC-2+Up to 150BIB/monthOne or Two Carbonatorswith Sediment Pre-Filter

QTC-1Up to 75 BIB/monthSingle Carbonator

QTC-2Up to 150 BIB/monthOne or Two Carbonators

QTC-3Over 150BIB/monthUp to ThreeCarbonators


Foun

tain

Bev

erag

e Q

T

System Performance



Filtration Solution



Qty.

QTC-1 160-52014 $353.00 22,500 85,162 2.25 8.5 XTO-Q 300-05840 1 $132.00

QTC-1+ 170-52061 $528.00 22,500 85,162 2.25 8.5 S5-Q 300-05802 1 $84.00 XTO-Q 300-05840 1 $132.00

QTC-2 170-52024 $790.00 45,000 170,325 4.5 17 XTO-Q 300-05840 2 $132.00

QTC-2+ 170-51007 $1,027.00 45,000 170,325 4.5 17 S5-Q 300-05802 1 $84.00 XTO-Q 300-05840 2 $132.00

QTC-3 170-52034 $1,131.00 67,500 255,478 6.75 25.5 XTO-Q 300-05840 3 $132.00

QTC-4 170-52044 $1,512.00 90,000 340,687 9.0 34 XTO-Q 300-05840 4 $132.00







QTC-4Over 150BIB/month,Up to FourCarbonators

© OptiPure11

QT FOUNTAIN BEVERAGE

FX-22BCRUp to 100 BIB/month One or Two Carbonators

FX-22PCR+Over 100 BIB/month up to Three Carbonators


Foun

tain

Bev

FX

System Performance



Filtration Solution



Qty.

FX-22BCR 160-50049 $1,419.00 25,000 95,400 5 18.9 CTO-20B 252-20420 1 $108.00 CCM-20B 252-20605 1 $353.00

FX-22PCR+ 160-50055 $1,913.00 100,000 302,400 5 18.9 CTO-20B 252-20420 1 $108.00 CCM-20B 252-20605 2 $353.00


Reduceschlorine

taste and odorInhibits scale

formationTakes outhardness minerals

Reduces chloramineRemoves a broad

range of minerals andother contaminants


CRQTCR-1Up to 1.7 GPM

QTCR-2Up to 3.4 GPM

QTCR-3Up to 5.1 GPM

QTCR-4Up to 6.8 GPM


Foun

tain

Bev

erag

e Q

T

System Performance



Filtration Solution



Qty.

QTCR-1 160-52131 $403.00 10,000 37,845 1.7 6.4 CTO-QCR2 300-05833 1 $164.00

QTCR-2 170-52132 $739.00 20,000 75,708 3.4 12.9 CTO-QCR2 300-05833 2 $164.00

QTCR-3 170-52133 $1,081.00 30,000 113,562 5.1 19.3 CTO-QCR2 300-05833 3 $164.00

QTCR-4 170-52134 $1,310.00 40,000 151,417 6.8 25.7 CTO-QCR2 300-05833 4 $164.00


Reduceschlorine






ICE MAKER



Ice

Mak

er Q

TI

System Performance



Filtration Solution



Qty.

QTI5-1 160-52076 $140.00 6,000 22,712 .75 2.85 CTOS-Q5 300-05804 1 $57.00

QTI10-1 160-52011 $309.00 15,000 56,775 1.5 5.7 CTOS-Q10 300-05829 1 $109.00

QTI10-2 170-52021 $682.00 30,000 113,550 3 11.3 CTOS-Q10 300-05829 2 $109.00

QTI10-3 170-52031 $1,019.00 45,000 170,344 4.5 17 CTOS-Q10 300-05829 3 $109.00

QTI-1 160-52012 $342.00 22,500 85,162 2.25 8.5 CTOS-Q 300-05835 1 $132.00







QT


Ice

Mak

er Q

TI

System Performance



Filtration Solution



Qty.

QTI-1+ 170-52055 $529.00 22,500 85,162 2.25 8.5 S5-Q 300-05802 1 $84.00 CTOS-Q 300-05835 1 $132.00

QTI-2 170-52022 $795.00 45,000 170,344 4.5 17 CTOS-Q 300-05835 2 $132.00

QTI-2+ 170-51010 $1,008.00 45,000 170,344 4.5 17 S5-Q 300-05802 1 $84.00 CTOS-Q 300-05835 2 $132.00 QTI-3 170-52032 $1,120.00 67,500 255,478 6.75 25.5 CTOS-Q 300-05835 3 $132.00

QTI-4 170-52042 $1,512.00 90,000 340,687 9.0 34 CTOS-Q 300-05835 4 $132.00







QTI-2Cubers upto 2000 lbs.Flakers upto 3000 lbs.

QTI-2+Cubers up to 2000 lbs. Flakers up to 3,000Lbs with Sediment Pre-Filter

QTI-3Cubers greater than 2000 lbs.Flakers upto 4000 lbs.

QTI-1+Cubers upto 1000 lbs.Flakers upto 1500 lbs.With SedimentPre-Filter

ICE MAKER

QTI10-1Cubers up to 800 lbs. Flakers up to 1000 lbs.

QTI10-2Cubers up to 1500 lbs. Flakers up to 2000 lbs.

QTI-1Cubers upto 1000 lbs.Flakers upto 1500 lbs.

QTI5-1Under Counter & Countertop Machines

QTI10-3Cubers greater than 2300 lbs. Flakers up to 3000 lbs

QTI-4Multiple Cubers Up to 2,000lbs each

ICE MAKER

© OptiPure13


Ice

Mak

er F

X

System Performance



Filtration Solution



Qty.

FXI-11 160-50105 $233.00 15,000 56,775 1.5 5.7 CTOS-10 252-00310 1 $46.00

FXI-12 160-50110 $305.00 30,000 113,550 3 11.3 CTOS-20 252-00320 1 $77.00

FXI-22 160-50115 $508.00 30,000 113,550 3 11.3 S5-20 252-00120 1 $20.00 CTOS-20 252-00320 1 $77.00

FXI-22P 160-50120 $725.00 60,000 227,100 6 22.7 CTOS-20 252-00320 2 $77.00







QT ICE MAKER

FXI-11Cubers upto 800 lbs.Flakers up to 1000 lbs.

FXI-12Cubers upto 1500 lbs.Flakers up to 2000 lbs.

FXI-22Cubers upto 1500 lbs.Flakers up to 2000 lbs.With sedimentPre-Filter.

FXI-22PCubers greater than 1500 lbs. Flakers up to 4,000 lbs.

FX

Sanit-ICE Specifications

InletConnection

AirFlow

AmbientConditions

OzoneLevelSystem

OutputPowerPrice

OverallDim.

PowerConnection WeightPart No.

Sanit-ICE 130-61025 $669.00 3/16” Barb 3.5 lbs. 2-4 SCFH

Backpressure2 PSI MAX

6’ Long with3-ProngCord

7.5” h10” w3.7” d

250 MG/HRat 4 SCFH

120-240 VAC50-60 Hz

32˚- 95˚F(0˚- 35˚C)

10 - 90% RHNon-Condensing

Ozo

ne

New Sanit-ICE Biofilm Reduction System for commercialice machinesSanit-ICE is an external wall-mounted, self-contained ozone ice treatment system allowing ozone to dissolve in the water, treating the water, as well as off gassing into the chiller compartment and treating all of the internal surfaces. With a sophisticated microcontroller, the Sanit-ICE Ozone System can adapt to any size ice machine.

– 1 year between maintenance regardless of ice maker size.

– Service timer allows unit to alert user when maintenance is required.

– Provides treatment for water and interior surfaces, even if no ice is being produced.

Sanit-ICE


Replacement CartridgesSystem Performance



Price(Per Unit)Model Part No.

RequiredQty.

Filtration Solution

System Part No. Price

QTI5-1 160-52076 $140.00 6,000 22,712 .75 2.85 CTOS-Q5 300-05804 1 $57.00

QTI10-1 160-52011 $309.00 15,000 56,775 1.5 5.7 CTOS-Q10 300-05829 1 $109.00

QTI10-2 170-52021 $682.00 30,000 113,550 3 11.3 CTOS-Q10 300-05829 2 $109.00

QTI-1 160-52012 $342.00 22,500 85,162 2.25 8.5 CTOS-Q 300-05835 1 $132.00

QTI-2 170-52022 $795.00 50,000 189,271 5.0 19 CTOS-Q 300-05835 2 $132.00

Cof

fee







COFFEE

It is essential to consider the impact water will have on equipment, products, customers and your success.

Water chemistry varies from one location to another. Poor beverage quality and equipment problems can be avoided with the right water treatment system.

Consider the following:

Sediment – can collect in equipment clogging parts and serving as a catalyst for scale build-up.

Chlorine – causes offensive tastes and contributes to corrosion in equipment.

Hardness – scale build-up in equipment reduces efficiency and damages equipment.

Total Dissolved Solids – all minerals that are dissolved in water including hardness minerals. High TDS increases corrosion potential and can be responsible for off-taste in beverages.

To select the right filtration for an application refer to your equipment’s manual to determine flow requirements.

WATER MAKES UP 98% OFCOFFEE AND TEA BEVERAGES.It has a significant impact on yourequipment as well as beverage qualityand consistency.

QTI10-1single brewers up to 1.5 gpm

QTI10-2single brewers up to 3.0 gpm

QTI-2multiple brewers up to 4.5 gpm

QTI5-1single low volume brewer up to .75 gpm

QTI-1single or multi-ple brewers up to 2.25 gpm

ICE MAKER

© OptiPure15

BWS350/16 BWS350/50

QTSX-2PGsingle brewer up to 1 GPM with high water hardness and pH below 8.5

COFFEE





RequiredQty.

Filtration Solution


QTSX-2PG 160-52822 $614.00 22,500 85.162 1 3.8 CTO-Q 300-05830 1 $116.00 SCLX2-Q 300-05860 1 $186.00

SX2-22 160-50142 $695.00 30,000 113,550 3 11.3 SX22RK 252-60115 1 $197.00

Cof

fee











RequiredQty.

System Solution

System Part No. PriceStorage TankCapacity

BWS350/16 164-14366 16 Gallons $5,179.00 CTO-Q 300-05830 2 $116.00

AMS-QT10 204-52810 1 $198.00 MA-Q15 300-05855 1 $109.00

BWS350/50 164-14375 50 Gallons $5,698.00 CTO-Q 300-05830 2 $116.00

AMS-QT10 204-52810 1 $198.00 MA-Q15 300-05855 1 $109.00

Cof

fee

Refer to ‘Reverse Osmosis Systems’ for detailedinformation about the OP and BWS systems








SX2-22multiple brewers up to 3 GPM with high water hardness and pH below 8.5

Recommended for high volume coffee or multiple equipment applications (such as a Café) whenwater quality is a problem.

Reverse Osmosis with Mineral-Addition and Adjustable Blend


ESPRESSO

QTSX-2PG*espresso machine up to 1 GPM with high water hardness and pH below 8.5

QTSFT-3single espresso machine - removes hardness minerals

QTSFT-3+single espresso machine - removes hardness then allows adjustable hardness blending





RequiredQty.

Filtration Solution


QTSX-2PG* 160-52822 $614.00 22,500 85,162 1 3.8 CTO-Q 300-05830 1 $116.00 SCLX2-Q 300-05860 1 $186.00

QTSFT-3 160-00450 $720.00 4500 grains 1 3.8 CSFT-Q 300-05885 1 $95.00 SFT-Q 300-05890 2 $106.00

QTSFT-3+ 160-00460 $1,372.00 5200 grains 1 3.8 CTO-Q10 300-05828 1 $96.00 SFT-Q 300-05890 3 $106.00

Espr

esso







QT10-1single esspresso machine high volume

QT-1multiple esspresso machines

FX-12multiple esspresso machines





RequiredQty.

Filtration Solution


QT5-1 160-52075 $129.00 6,000 22,712 .75 2.85 CTO-Q5 300-05803 1 $55.00

QT10-1 160-52009 $296.00 15,000 56,775 1.5 5.7 CTO-Q10 300-05828 1 $96.00

QT-1 160-52010 $327.00 22,500 85,162 2.25 8.5 CTO-Q 300-05830 1 $116.00

FX-12 160-50020 $281.00 30,000 113,550 3 11.3 CTO-20 252-00220 1 $50.00

Espr

esso







QT5-1single esspressomachine low volume

*ScaleX2 inhibits scale formation and does not take out hardness minerals

© OptiPure17

BWT Single Cartridge Filtration Systems

ModelDimensions

(H x W)Part No.Connection

Inlet*Connection

Outlet*Operating

Pressure RangeInlet Water

Temperature RangePrice

(Per Unit)Required

Qty.

BWT Premium M 300-05360 $411.00 19.7” x 5.12” 3/8” BSP male 3/8” NPT 1

BWT Premium XL 300-05361 $629.00 20.9” x 5.71” 3/8” BSP male 3/8” NPT 1

300-02102 $249.00 1

Aqua Meter 300-02106 $321.00 1

Espr

esso 29 - 116 psi

(2 - 8 bar)39 - 86˚ F

(1.67 - 30˚ C)29 - 116 psi(2 - 8 bar)

39 - 86˚ F(1.67 - 30˚ C)

OPBWT Headw/ flush valve kit

ESPRESSO





RequiredQty.

System Solution

System Part No. PriceTechnology

BWS100/2 164-00102 $2,061.00 CTO-Q10 300-05828 2 $96.00 AMS-QT10 204-52810 1 $198.00 BWS100/5 164-00105 $2,246.00 CTO-Q10 300-05828 2 $96.00 AMS-QT10 204-52810 1 $198.00 BWS100/10 164-00110 $2,309.00 CTO-Q10 300-05828 2 $96.00 AMS-QT10 204-52810 1 $198.00 BWS100/16 164-00116 $2,609.00 CTO-Q10 300-05828 2 $96.00 AMS-QT10 204-52810 1 $198.00

Espr

esso











Reverse Osmosiswith Blend




BWT Premium M

BWT Premium XL

This is a guideline for recommended blend settings and capacities for the BWT Bestmax Premium M and XL systems.The values indicated here are minimum capacities based on total hardness. For more information please contact OptiPure.

OPBWT Head

OPBWT Flush Valve

The BWT bestmax PREMIUM M and XL are single cartridge filtration systems that reduce sediment, chlorine taste & odor and remove scale-forming hardness. The AromaPLUS formula adds magnesium to the product (optimized) water which provides a balance of minerals.

MUST ORDER HEAD & FLUSH VALVE TO

COMPLETE SYSTEM

5 Gallon 10 Gallon 16 Gallon2 Gallon

Single espressomachine applicationswhen water qualityis a problem.

Reverse Osmosis with Adjustable Blend, NO Mineral-addition

BWS100


TEA

5 Gallon 10 Gallon 16 Gallon





RequiredQty.

Filtration Solution


BWS100/2 164-00102 2.5 Gallons $2,061.00 CTO-Q10 300-05828 2 $96.00 AMS-QT10 204-52810 1 $198.00

BWS100/5 164-00105 5 Gallons $2,246.00 CTO-Q10 300-05828 2 $96.00 AMS-QT10 204-52810 1 $198.00 BWS100/10 164-00110 10 Gallons $2,309.00 CTO-Q10 300-05828 2 $96.00 AMS-QT10 204-52810 1 $198.00 BWS100/16 164-00116 16 Gallons $2,609.00 CTO-Q10 300-05828 2 $96.00 AMS-QT10 204-52810 1 $198.00

Tea











2 Gallon

QT-2multiplebrewers upto 4.5 gpm

QT-2+multiplebrewers up to 4.5 gpm with sediment pre-filter

QT-1multiple brewers up to 2.25 gpm

QT10-1singlebrewerup to1.5 gpm

FX-11singlebrewerup to1.5 gpm

FX-12multiplebrewersup to3 gpm





RequiredQty.

Filtration Solution


QT10-1 160-52009 $296.00 15,000 56,775 1.5 5.7 CTO-Q10 300-05828 1 $96.00

QT-1 160-52010 $327.00 22,500 85,162 2.25 8.5 CTO-Q 300-05830 1 $116.00

QT-2 170-52020 $757.00 50,000 189,271 5.0 19 CTO-Q 300-05830 2 $116.00

QT-2+ 170-51005 $965.00 50,000 189,271 5.0 19 S5-Q 300-05802 1 $84.00 CTO-Q 300-05830 2 $116.00FX-11 160-50010 $228.00 15,000 56,775 1.5 5.7 CTO-10 252-00210 1 $30.00

FX-12 160-50020 $281.00 30,000 113,550 3 11.3 CTO-20 252-00220 1 $50.00

Tea







Single brewerapplicationswhen water qualityis a problem.


BWS100

© OptiPure19


Mul

ti-Po

int

System Performance



Filtration Solution



Qty.

QT2+MP 170-52040 $1,761.00

45,000 170,344 4.5 17 S5-Q 300-05802 1 $84.00

CTO-Q 300-05830 2 $116.00 PTS-Q 300-05805 1 $91.00

QT3MP 170-52070 $1,954.00 67,500 255,478 6.75 25.5 CTO-Q 300-05830 3 $116.00 PTS-Q 300-05805 1 $91.00

QTC2+MP* 170-52045 $1,842.00

45,000 170,325 4.5 17 S5-Q 300-05802 1 $84.00

XTO-Q 300-05840 2 $132.00 PTS-Q 300-05805 1 $91.00

QTC3MP* 170-52075 $2,117.00

67,500 255,478 6.75 25.5 XTO-Q 300-05840 3 $132.00 PTS-Q 300-05805 1 $91.00 *Cyst-Rated







Multi-Point systems provide the flexibility to connect to different types of equipment that have different water treatment requirements.

OptiPure Multi-Port systems support primary filtration to remove sediment, chlorine, taste & odor, and secondary filtration for equipment that needs additional protection benefits, usually to guard against scale and corrosion. For more detailed information, please visit the Multi-Point section of optipurewater.com.

QT2+MPQTC2+MP*

QT3MPQTC3MP*

MULTI-POINTQT

Fountain Beverage

Ice Maker

CoffeeIN

Non Treated Water


Reverse Osmosis with Mineral-Addition

STEAM





RequiredQty.

System Solution


Stea

m

Refer to Reverse Osmosis Systems for OP system performance details.

OP175/16 164-00216 16 Gallons $4,105.00 CTO-Q10 300-05828 2 $96.00

AMS-QT15 204-52820 1 $480.00 MA-Q10 300-05850 1 $93.00

OP350/16 164-14416 16 Gallons $4,767.00 CTO-Q 300-05830 2 $116.00

AMS-QT 204-53040 1 $732.00 MA-Q15 300-05855 1 $109.00

OP350/50 164-14450 50 Gallons $5,281.00 CTO-Q 300-05830 2 $116.00

AMS-QT 204-53040 1 $732.00 MA-Q15 300-05855 1 $109.00

OP350/50 HF 164-14451 50 Gallons $5,903.00 CTO-Q 300-05830 2 $116.00

AMS-QT 204-53040 1 $732.00 MA-Q15 300-05855 1 $109.00











OP175 OP350 16 Gallon 50 Gallon





RequiredQty.

Filtration Solution

System Part No. Technology Price

Stea

m QT1+CR* 170-52080 no inhibitor $496.00 20,000 75,708 2.5 9.5 CTO-Q10 300-05828 1 $96.00 6,000* 22,712 0.5* 1.9* CTO-QCR 300-05831 1 $130.00

QTI1+CR* 170-52081 Isonet $504.00 20,000 75,708 2.5 9.5 CTO-Q10 300-05828 1 $96.00 6,000* 22,712 0.5* 1.9* CTOS-QCR 300-05832 1 $143.00

FX11+CR* 160-50012 no inhibitor $529.00 10,000* 37,800* 3* 11.4* CCM-20 252-20620 1 $111.00 20,000 75,708 2.5 9.5 CTO-10 252-00210 1 $30.00

FXI11+CR* 160-50185 Isonet $553.00 10,000* 37,800* 3* 11.4* CCM-20 252-20620 1 $111.00 20,000 75,708 2.5 9.5 CTOS-10 252-00310 1 $46.00


Reduceschlorine






*Chloramine Reduction

QT1+CR FXI11+CRQTI1+CR FX11+CR

Refer to the OptiPure Combi and Steam oven sizing guides to select the right system for your steam equipment.

© OptiPure21

STEAM

OPS70 OPS70CR OPS175 OPS175CR


System Performance

Daily Production* Storage Tank Volume Delivery Flow Rate**

Gallons Liters Gallons Liters GPM LPM

System Solution


Stea

m

*Gallons per day at 77°F @ 60 PSI. Production will vary depending on available water pressure and water temperature.**Delivery pressure and flow will vary depending on water level in tank.

OPS70/2 164-01202 $1,339.00 70 132-265 2.5 9.5 up to 2.5 up to 9.5

OPS70/5 164-01205 $1,468.00 70 132-265 5 18.9 up to 2.5 up to 9.5

OPS70/10 164-01210 $1,571.00 70 132-265 10 37.9 up to 2.5 up to 9.5

OPS70/16 164-01216 $1,777.00 70 132-265 16 60.5 up to 2.5 up to 9.5

OPS70CR/2 164-01502 $1,622.00 70 132-265 2.5 9.5 up to 2.5 up to 9.5

OPS70CR/5 164-01505 $1,751.00 70 132-265 5 18.9 up to 2.5 up to 9.5

OPS70CR/10 164-01510 $1,854.00 70 132-265 10 37.9 up to 2.5 up to 9.5

OPS70CR/16 164-01516 $2,060.00 70 132-265 16 60.5 up to 2.5 up to 9.5

OPS175/2 164-01302 $1,751.00 175 662 2.5 9.5 up to 2.5 up to 9.5

OPS175/5 164-01305 $1,880.00 175 662 5 18.9 up to 2.5 up to 9.5

OPS175/10 164-01310 $1,983.00 175 662 10 37.9 up to 2.5 up to 9.5

OPS175/16 164-01316 $2,189.00 175 662 16 60.5 up to 2.5 up to 9.5

OPS175CR/2 164-01402 $1,957.00 175 662 2.5 9.5 up to 2.5 up to 9.5

OPS175CR/5 164-01405 $2,086.00 175 662 5 18.9 up to 2.5 up to 9.5

OPS175CR/10 164-01410 $2,189.00 175 662 10 37.9 up to 2.5 up to 9.5

OPS175CR/16 164-01416 $2,395.00 175 662 16 60.5 up to 2.5 up to 9.5







Reverse Osmosis with Mineral-Addition. CR models include Chloramine Reduction.

OPS Reverse Osmosis systems are specifically designed for steam applications.The compact, non-electric design offers a high-value choice with 16 models to meet your specific requirements.

Refer to the OptiPure Combi and Steam oven sizing guides to select the right system for your steam equipment.For filter and membrane replacement information please refer to the system specification sheet, which can be downloaded at www.optipurewater.com


BWS350/16 164-14366 Reverse Osmosis with $5,179.00 400 1,512 16 60.5 up to 4 up to 15 Mineral-Addition and Blend

BWS350/50 164-14375 Reverse Osmosis with $5,698.00 400 1,512 50 189 up to 4 up to 15 Mineral-Addition and Blend

BWS350/50 HF 164-14376 Reverse Osmosis with $6,325.00 400 1,512 50 189 up to 10 up to 38 Mineral-Addition and Blend

BWS350/175HF 164-14380 Reverse Osmosis with $6,748.00 400 1,512 175 662 up to 10 up to 38 Mineral-Addition and Blend

Reve

rse

Osm

osis System Part No. PriceDescription

System Solutions - Up to 400 GPD

*Gallons per day at 77°F @ 60 PSI. Production will vary depending on available water pressure and water temperature.**Delivery pressure and flow will vary depending on water level in tank.







System Performance

Daily Production*

Storage TankVolume

Delivery Flow Rate**


REVERSE OSMOSIS SYSTEMS

BWS350/16 BWS350/50

Reve

rse

Osm

osis

BWS 100/2 164-00102 Reverse Osmosis System $2,061.00 100 380 10 38 up to 2.5 up to 9.5 with Blend




160-52890 OPTIONAL BWS 100 $75.00 Manual Bypass Kit




System Performance

Daily Production*

Storage TankVolume


Gallons Liters Gallons Liters GPM LPMSystem Part No. PriceDescription


BWS 100Bypass Kit*Gallons per day at 77°F @ 60 PSI. Production will vary depending on available water pressure and water temperature.**Delivery pressure and flow will vary depending on water level in tank.




BWS100


BWS350/50HF



For filter and membrane replacement information please refer to the system specification sheet, which can be downloaded at www.optipurewater.com

© OptiPure23

OptiPure Reverse Osmosis Systems are the right choice for food service water treatment applications when: – TDS and hardness levels are too severe for scale inhibition or basic filtration.

– Equipment manufacturer’s minimum water quality standards for warranty must be achieved.

– Consistency of product is required regardless of location or differing water characteristics.

OptiPure offers different styles of reverse osmosis systems which include systems with mineral-addition (OP & OPS) and systems with mineral-addition and blending (BWS).

Note: BWS100 line does not include mineral-addition.

– OP & OPS systems utilizes mineral-addition to insure you always have a specific balance of minerals in your water regardless of your incoming water quality.

– BWS includes mineral-addition and a precision blend valve to adjust your TDS level as desired.


BWS1500/50 BWS1500/50 HF(shown). Alsoavailable with175 or 300 gallonstorage tank

Reve

rse

Osm

osis

System Part No. PriceDescription

System Solution - Up to 1500 GPD






Water Treatment System Performance With Reverse Osmosis Systems

System Performance

Daily Production*

Storage TankVolume



BWS1500/50 164-15545 $9,959.00 1500 5,670 50 189 up to 4 up to 15

BWS1500/50HF 164-15550 $10,998.00 1500 5,670 50 189 up to 10 up to 38

BWS1500/175HF 164-15575 $11,356.00 1500 5,670 175 662 up to 10 up to 38

BWS1500/175HF PLUS 164-15576 $11,653.00 1500 5,670 175 662 10 plus 38 plus

BWS1500/300HF 164-15580 $11,734.00 1500 5,670 300 1,134 up to 10 up to 38

BWS1500/300HF PLUS 164-15581 $12,085.00 1500 5,670 300 1,134 10 plus 38 plus

Reverse Osmosis with Mineral-Addition and Blend

Reverse Osmosis withMineral-Addition and

Blend and High Flow RPReverse Osmosis withMineral-Addition and




Blend and High Flow RP*Gallons per day at 77°F @ 60 PSI. Production will vary depending on available water pressure and water temperature.**Delivery pressure and flow will vary depending on water level in tank.





OP350/16 OP350/50OP175/16

OP175/16 164-00216 Reverse Osmosis with $4,105.00 175 662 16 60.5 up to 4 up to 15 Mineral-Addition

OP350/16 164-14416 Reverse Osmosis with $4,767.00 350 1,323 16 60.5 up to 4 up to 15 Mineral-Addition

OP350/50 164-14450 Reverse Osmosis with $5,281.00 350 1,323 50 189 up to 4 up to 15 Mineral-Addition

OP350/50 HF 164-14451 Reverse Osmosis with $5,903.00 350 1,323 50 189 up to 10 up to 38 Mineral-Addition

Reve

rse

Osm

osis System Part No. PriceDescription








System Performance

Daily Production*

Storage TankVolume



*Gallons per day at 77°F @ 60 PSI. Production will vary depending on available water pressure and water temperature.**Re-pressurizzation system maintains consistent pressure regardless of water level in storage tank.

OptiPure Reverse Osmosis systems are designed to provide optimal quality water for specific application requirements from a single piece of equipment to all water-using equipment in an establishment. With proper application, installation and routine maintenance a user can expect consistent, measurable water quality that has a significant impact on reducing maintenance requirements, increasing equipment life and improving product quality.

Contact your OptiPure representative or distributor for assistance with:

– Water testing

– System selection based on specific application requirements

– Technical support with pre-installation planning, installation, and start-up

– On-going service and maintenance

Reverse Osmosis with Mineral Addition


© OptiPure25

War

ewas

hing/

Softe

ning Flow Rates

GPM LPM

OS.10 165-01003 5,000 $1,684.00 4 15.1

OS.13 165-01004 7,500 $1,772.00 5.3 20

OS.20 165-01006 12,600 $1,861.00 7.9 29.9

OS.29 165-01009 18,300 $2,011.00 11.4 43

System Part No.Grain

Capacity/Regen.

Price

Softening Solution Application GuideGlass

washerUnder

counterDoorType

ConveyorType

FlightType

1-10gpg

>10gpg

1-10gpg

>10gpg

1-8gpg

>8gpg

1-8gpg

>8gpg

AllTypes







WAREWASHING/SOFTENING

OS.10 OS.13 OS.20 OS.29

48K OptiSoft system 64K OptiSoft system

For Use with OptiPure Reverse Osmosis Systems as needed

For Use with Hot or Cold Water

Grains Gallons per Minute

System Performance

Rated Capacity

OS 48K 165-02048 $2,217.00 48,000 10

OS 64K 165-02064 $2,366.00 64,000 10

Softe

ning


Softening Solution


FOOD SAFETY

Food service professionals understand the benefits of ozone as an additional cleaning tool and safe organic solution. Ozone can augment traditional sanitizing agents such as chlorine and provide other benefits in washing and storage of food products. Rinsing your food products with ozonated water adds another dimension of safety to your food preparation process and may be used in applications such as:

• Fruit & Vegetable rinse systems• Food, Meat, Poultry and Seafood processing• Surface sanitation• Hand wash• Wash cloth rinse

The ActivTapp Commerical Series (ACS) operates with your faucet and sink. It automatically turns on when the water flows, infusing ozone into your cold rinse water. Benefits of the ACS system include:

• Real-time proof of delivery• Improved food safety and quality control• Production on site - nothing to store or transport• Extended shelf life of food• Organic and sustainable option

ACS-3 Schematic

HAND WASH SINK

HIGH FLOWPREP SINK #1

RINSINGPREP SINK #2

ACS-3 STATUS PANEL

OZONE GENERATOR

INCOMING WATERHIGH FLOW

INCOMING WATERHAND WASH RINSING

SYSTEM STATUS

POWER

OZONE

SERVICE

SANITIZER

HAND SINK

PREP SINK #1

PREP SINK #2RED = Wait GREEN = Ready

ACTIVATED OXYGEN

ACS Status Panel

ACS-1

ACS-3

ACS Ozone Generators

COMMERCIAL SERIES

Activated-Oxygen for that Added

Measure of Food Safety

ACS Specifications

Inlet &Outlet

ConnectionWaterFlowRate

AmbientZone

OzoneLevel

InletWater

Pressure# of

OutletsSystemInput

PowerPriceOverallDim.

MountingDim. Weight ListingsPart No.

ACS-1 340-72041 $3,309.00 1-4 GPM 1 40-100 PSI 3/4” MNPT 16” wide 7 lbs. UL, NSF

Food

Saf

ety

less than0.08 PPM

0.5 PPM@ 4 GPM

90-264 VAC,50-60 Hz,50 Watts

ACS-2 340-72042 $7,222.00 1-4 GPM 2 40-100 PSI 18.5” wide 20 lbs. UL, NSF less than0.08 PPM1/2” MNPT (3x)3/4” MNPT (3x)

1/2” MNPT (3x)3/4” MNPT (3x)

0.5 PPM@ 4 GPM

80-264 VAC,50-60 Hz,100 Watts

ACS-3 340-72040 $7,958.00 1-4 GPM 3 40-100 PSI 18.5” wide 25 lbs. UL, NSFless than0.08 PPM0.5 PPM@ 4 GPM

80-264 VAC,50-60 Hz,150 Watts

17.25”w10”h3”d

17.25”w19.5”h3.75”d

17.25”w19.5”h3.75”d

ICE MAKER

© OptiPure27

Sanit-ICE Specifications

InletConnection

AirFlow

AmbientConditions

OzoneLevelSystem

OutputPowerPrice

OverallDim.

PowerConnection WeightPart No.

Sanit-ICE 130-61025 $669.00 3/16” Barb 3.5 lbs.2-4 SCFH

Backpressure2 PSI MAX

6’ Long with3-ProngCord

7.5” h10” w3.7” d

250 MG/HRat 4 SCFH

120-240 VAC50-60 Hz

32˚- 95˚F(0˚- 35˚C)

10 - 90% RHNon-Condensing

OZONE SYSTEMS

Ozone Disinfection for commercial HVAC applicationsThe ComAir 20T Air Treatment System is the most advanced commercial grade HVAC sterilization system available. With germicidal killing power of 300 microwatts and 0-100% variable ozone output, it effectively eliminates bacteria and viruses along with odor from smoke, pets, and food preparation.

New Sanit-ICE Biofilm Reduction System for commercialice machinesSanit-ICE is an external wall-mounted, self-contained ozone ice treatment system allowing ozone to dissolve in the water, treating the water, as well as off gassing into the chiller compartment and treating all of the internal surfaces. With a sophisticated microcontroller, the Sanit-ICE Ozone System can adapt to any size ice machine.

– 1 year between maintenance regardless of ice maker size.

– Service timer allows unit to alert user when maintenance is required.

– Provides treatment for water and interior surfaces, even if no ice is being produced.

Sanit-ICE

ComAir 20T

COMAIR 20T Specifications

Overall Dim.

Total Power Consumption

OutputPowerVoltageSystem

Exposed Size (outside of Duct)Price

MinimumDuct Depth WeightPart No.

ComAir 20T 130-61050 $2,416.00 18” 10 lbs.

Lamp Specifications

16” h6” w4” d

16” h6” w20” d

120-240 VAC50-60 Hz

90-270 VAC50-60 Hz

70W at MAXOutput Setting

Ozone Lamp Germicidal Lamp

• Maximum Service Capacity: 20T, 8,000 CFM, or 6,000 sq. ft. per unit• AC Unit Size (Maximum): 20 Tons• 25W, Hot Filament, Instant-Start, Hard Quartz, Glass Construction,

• 185 nm Wavelength Output• Rate Life: 20,000 hours (2-3 years continuous use)• Maintenance: Annual Cleaning• Easy Lamp Service Requires No Tools• Ozone Output Settings are Adjustable Based on Need (Low, Medium, High & Boost)

• Maximum Service Capacity: 20T, 8,000 CFM, or 6,000 sq. ft. per unit• AC Unit Size (Maximum): 20 Tons• 90% of Output at 253.7 nm Wavelength• Rate Life: 20,000 hours (2-3 years continuous use)• Maintenance: Annual Cleaning• Easy Lamp Service Requires No Tools• Output (Measurements Taken at 70˚F): 300 micro watts per sq. cm. at 39.37” (1m) 2,400 micro watts per sq. cm. at 12.00” 7,450 micro watts per sq. cm. at 6.00”


System Performance

Gallon Rating Flow Rate


Description Part No. Pack Size Price Each

5 Micron Taste & Odor Scale

1 Micron Taste & Odor Scale

WCTOI-8* 300-05201CS 24 $55.00 6,000 .75

WCPWS-10* 300-05115CS 20 $53.00 3,000 .5

WCS5-10* 300-05113CS 20 $50.00 2,500 .5

WCS-10* 300-05110CS 20 $51.00 2,500 .5

WCES-15* 300-05211CS 12 $72.00 15,000 1.67

Application: Low flow coffee

System Performance

Gallon Rating Flow Rate



WCTO-8* 300-05200CS 24 $53.00 6,000 .75

WCSL-10* 300-05114CS 20 $57.00 1,500 .5

WCESL-15* 300-05210CS 12 $62.00 2,500 1.67

WCE-15* 300-05212CS 12 $56.00 15,000 1.67

Chlorine Taste & Odor, Particulate, Cyst, & LimescaleApplication: Point of use water coolers

OFFICE WATER & COFFEE

WCPWS-10 WCS5-10 WCS-10 WCES-15

*Sold in case quantities only.

WCSL-10 WCESL-15 WCE-15


WCTO-8

WCTOI-8

© OptiPure29

Filter Heads

Head Connection Part No. Pack Size Price Each

H3T* Non-Valve 3/8” FPT 300-05911 12 $34.00

H3* Non-Valve 3/8” JG 300-05912 12 $34.00

H1* 300-05913 12 $49.00Valve 1/4” JGvalve in head – auto shut-off

System Performance

Gallon Rating Flow Rate Connection

In-lines


WCI-6.14* (Taste, Odor & Scale) 300-00752CS 25 $31.00 1,250 .5 1/4” JG

WCIS-10.14* (Taste, Odor & Scale) 300-00750CS 25 $39.00 1,500 .5 1/4” JG

ILTOS-10.38* (Taste, Odor & Scale) 252-70220 6 $38.00 1,250 .5 3/8” FPT

ILTO-10.38* (Taste, Odor) 252-70120 6 $35.00 1,500 .5 3/8” FPT

OFFICE WATER & COFFEE

WCI-6.14 WCIS-10.14 ILTO-10.38ILTOS-10.38

H3T H3 H1




COMPETITIVE CROSS REFERENCE GUIDE

CTOS-EK10Replacement cartridge for Everpuresystem – ice/coffee

CTO-EK10Replacement cartridge for Everpuresystem – beverage

Everpure® OptiPure Suggested Replacements

Everpure Part Number OptiPure Cartridge OptiPure Part Number Price(Per Unit)Everpure Cartridge

MC 9612-56

XC 9613-10

4FC 9692-21

4FC-5 9693-21

4CB-5 9617-16

7FC 9692-61

7FC-5 9693-61

7CB-5 9618-11

I-2000 9612-22

I-4000 9612-32

4CB5-S 9617-26

7CB5-S 9618-21

4FC5-S 9693-31

7FC5-S 9693-71

MH 9613-21

BH 9612-50

7FC-5 9693-61 CTO-EK10 300-08035 $98.00

SS-10 ScaleStick 9799-02 PTS-10 252-00810 $45.00

SCALECLEAN 9798-35 OPTICLEAN 150-50026 $68.00 (Sold in case of 4 only)

CTO-EK10 300-08035 $98.00 (Sold in 10 Packs)

CTOS-EK10 300-08045 $107.00 (Sold in 10 Packs)

Opt

iPur

e C

ompe

titiv

e C

artri

dges

Deliming Scale Remover

Steam Replacement Cartridge

ICE MAKER

© OptiPure31

CTO-CK10Replacement cartridge for 3M Cuno system – beverage

CTOS-CK10Replacement cartridge for 3M Cunosystem – ice/coffee

COMPETITIVE CROSS REFERENCE GUIDE

3M® Cuno OptiPure Suggested Replacements

Opt

iPur

e C

ompe

titiv

e C

artri

dges 3M® CUNO Part Number OptiPure Cartridge OptiPure Part Number3M® CUNO Cartridge

CFS8112 5581705

CFS8112 EL 5581725

CFS8112X 5601101 CTO-CK10 300-08010 $85.00

CFS8720 5631905

CFS8720 EL 5632002

CFS8112 S 5581708

CFS8112 ELS 5581727

CFS8112 XS 5601103 CTOS-CK10 300-08015 $95.00

CFS8720 S 5631904

CFS8720 ELS 5632001

Price(Per Unit)

(Sold in 10 Packs)

(Sold in 10 Packs)

Everpure® Coffee & Office Water - OptiPure Suggested Replacements

Everpure Part Number OptiPure Cartridge OptiPure Part Number Pack Size Price(Per Unit)Everpure Cartridge

OCS2 EV9618-02 WCS-10* 300-05110CS 20 $51.00

OCS2 EV9618-02 WCTOI-8* 300-05201CS 20 $55.00

2CB-GW EV9618-36 WCPWS-10* 300-05115CS 20 $53.00

2CB-GW EV9618-36 WCTOI-8* 300-05201CS 20 $55.00

HQS-WF DEV9830-01 WCPWS-10* 300-05115CS 20 $53.00

HQS-WF DEV9830-01 WCTOI-8* 300-05201CS 20 $55.00

AC EV9601-12 WC-10* 300-05111CS 20 $44.00

2CB5-S EV9617-22 WCS5-10* 300-05113CS 20 $50.00

2-HL EV9634-26 WCSL-10* 300-05114CS 20 $57.00

OW2Plus EV9634-01 WCSL-10* 300-05114CS 20 $57.00

4-HL EV9635-26 WCESL-15* 300-05210CS 12 $62.00

4H EV9611-00 WCES-15* 300-05211CS 12 $72.00

4H EV9611-00 WCTOI-8* 300-05201CS 12 $55.00

OW4Plus EV96135-01 WCESL-15* 300-05210CS 12 $62.00

4C EV9601-00 WCE-15* 300-05212CS 12 $56.00

4C EV9601-00 WCTOI-8* 300-05201CS 12 $55.00

Opt

iPur

e C

ompe

titiv

e C

artri

dges

* Sold in case quantity only


Filtration Solution

System Part No. Type Price

System Performance



** Sold 2 per case - not individually



RequiredQty.

FXAF-12 160-50305 Extra Pre-Filtration $281.00 n/a n/a 5 19 S5-20 252-00120 1 $20.00

S5-20 252-10120 1 $17.00

FXAF01-12 160-50301 Extra Pre-Filtration $281.00 n/a n/a 5 19 S1-20 252-00119 1 $20.00

S1-20 252-10020 1 $17.00

FXAF-12B 160-50340 Extra Pre-Filtration $471.00 n/a n/a 8 30 S5-20B 252-10410 1 $75.00**

FXAF01-12B 160-50345 Extra Pre-Filtration $471.00 n/a n/a 8 30 S1-20B 252-10405 1 $81.00**

FXTS-11 160-50003 Sediment and Scale $178.00 20,000 75,600 2 7.6 PTS-10 252-00810 1 $45.00

PTS-10 252-10810 1 $42.00

FXTS-12 160-50004 Sediment and Scale $242.00 40,000 151,200 4 18.9 PTS-20 252-00820 1 $67.00

PTS-20 252-10820 1 $65.00

SX2-21 160-00350 ScaleX2 $415.00 15,000 56,775 1.5 5.7 SX21RK 252-60110 1 $127.00

SX2-22 160-50142 ScaleX2 $695.00 30,000 113,550 3 11.3 SX22RK 252-60115 1 $197.00

Mis

cella

neou

s Pr

oduc

ts

S5-20 Catridges by the case (6 QTY)

S1-20 Catridges by the case (6 QTY)

PTS-10 Catridges by the case (6 QTY)

PTS-20 Catridges by the case (6 QTY)

MISCELLANEOUS PRODUCTS

Visit www.optipurewater.com for detailed specification sheets and retrofit information.

FXAF-12When excessivedirt and sediment are a problem

FXAF-12BWhen excessivedirt and sediment are a problem

SX2-21 SX2-22

© OptiPure33

System Performance





RequiredQty.

Filtration Solution


QTTS10-1 160-52090 Sediment and Scale $279.00 15,000 56,700 2 7.6 PTS-Q 300-05805 1 $91.00

OptiClean 150-50026 DeScaler (4 bottles) $68.00 4/cs - 4lb bottles, sold in case packs only $272 for case of 4Misc

Pro

duct

sMISCELLANEOUS PRODUCTS

H2OTest Express Kit

Watercheck- OP Water Test

OP-COM 100TDS Meter

OPTICLEANRemoves scale build-up from equipment

QTTS10-1When secondary scale inhibition is needed

Double Triple QuadSingle

OptiPure Manifolds


Single 160-91003 Manifold $173.00

Double 170-91010 Manifold $469.00

Triple 170-91013 Manifold $664.00

Quad 170-91015 Manifold $890.00

Misc

Pro

duct

s

Water Testing

System Part No. Type Price Notes

H2O Express 180-80180 Water Test $58.00 12/cs - sold in case packs only $696 for case of 12

OP-COM100 180-85025 TDS Meter $176.00

Watercheck-OP 180-81105 Water Test $113.00 Non Discounted Price Mis

c Pr

oduc

ts

ICE MAKER


MISCELLANEOUS PARTS & KITS

Miscellaneous Filtration Parts & Kits

SystemDescription SuggestedQuantityPrice

(Per Unit)Part No.

Mis

cella

neou

s Pr

oduc

ts

QT Models520-12215 QT Inlet Ball Valve $32.00 5530-20019 Pressure Gauge $49.00 2FX Models 520-12055 Inlet Ball Valve - all FX except 22P and 22P+ models $39.00 5520-12031 Inlet Ball Valve - 22P 22P+ models $34.00 2530-20019 Pressure Gauge $49.00 2600-99003 FX O-Ring $6.00 12600-10051 FX 10" Sump with O-ring $66.00 1600-10060 FX 20" Sump with O-ring $86.00 1600-99205 FX Pressure Relief Kit $8.00 413203 FX Filter Wrench $8.00 2FX-B Models 520-12006 Inlet Ball Valve - 3/4" $50.00 1600-99206 FXB (Big Bowl) Pressure Relief Kit $10.00 2530-20019 Pressure Gauge $49.00 113217 FXB (Big Bowl) O-ring $14.00 12600-99009 FXB Filter Wrench $12.00 2Reverse Osmosis Replacement Parts - Processors704-70015 Permeate Pump BWS100, OP70, OPS70, OP70CR, OPS175, OPS350 $165.00 1530-20018 Pressure Gauge BWS100,350, OP175, 350, OPS175, OPS175CR $61.00 1530-20090 Pressure Gauge BWS1500 $110.00 1164-89913 Adapter Kit, 3/8"-1/4" Auto Shut-off OP175 $88.00 1564-02105 Flow Control, Capillary OP175, BWS200 $20.00 2714-10998 Solenoid Valve, 3/8" PTC (after 12/12/2014) BWS200, OP350, BWS350 $100.00 1714-10150 Solenoid Valve, 1/2" Diaphragm OP1200, BWS1500 $213.00 1520-12223 Valve, Sample Port BWS200, OP350, BWS350 $28.00 2514-90440 Valve, Reject Flow Control Assy OP350, BWS350 $114.00 1551-63021 Elbow, Membrane Reject 1/4" PtC OP175, BWS200 $7.00 2551-65210 Connector, Membrane Stem OP175, BWS200 $2.00 2Reverse Osmosis Replacement Parts - Installation, Storage & RP 164-89938 PRV - Pressure Reducing Value Assembly w/PG & Brkt $189.00 1 300-40005 Air Breather, 0.2m Hydrophobic $246.00 1704-90023 Replacement Pump Assembly $420.00 2704-39905 Brush Kit for Repressurization Pump $67.00 2340-50001 Buffer Tank, 1.4L Black $63.00 1340-50004 Buffer Tank, 2.5G White $103.00 1520-14501 Valve, Tank Shut-off $39.00 1550-08730 Connector, 1/2" Stem x 1/2" Barb $9.00 8580-00106 Poly tube Black 1/4 $1.00 12580-00110 Poly tube Blue 3/8 $2.00 11580-00111 Poly tube Green 3/8 $2.00 12584-00050 HOSE 1/2 ID FDA GRAY PVC B $5.00 16

© OptiPure35

GLOSSARY

OptiPure Glossary of AbbreviationsOptiPure Glossary of Abbreviations

DefinitionCode .14 1/4" In and Out FPT (Female Pipe Thread) .38 3/8" In and Out FPT (Female Pipe Thread) 1 1 cartridge system 2 2 cartridge system 3 3 cartridge system 4 4 cartridge system 5 5" cartridge 10 10" (Drop-In Only) 20 20" (Drop-In Only) /2 2 gallon tank /5 5 gallon tank /10 10 gallon tank /16 16 gallon tank /50 50 gallon tank /175 175 gallon tank /300 300 gallon tank # after OP Production Gallons per day (RO) or BWS i.e. BWS 175 = 175 gallons, 350, 1500 + With additional sediment pre-filtration AF Additional Filtration, Stand Alone AMS Advanced Membrane Separation (replacement membrane element) for RO Systems B Big Blue sumps BWS Blended RO Water System CCM Drop-In Chloromine reduction filter CK 3M Cuno compatible cartridge CR Chloromine Reduction CSFT Carbon plus softening resin cartridge CTO Drop-In Chlorine, Taste & Odor filter CTO-Q Qwik-Twist Chlorine Taste & Odor cartridge CTOS Drop-In Chlorine, Taste & Odor, IsoNet scale inhibitor cartridge CTOS-Q Qwik-Twist Chlorine Taste & Odor, IsoNet scale inhibitor cartridge CW Carbon plus softening resin (Espresso Mate Only) EK Everpure compatible cartridge EM Espresso Mate systems FX Drop-In Chlorine Taste Odor systems FXI Drop-In Chlorine Taste Odor, IsoNet scale inhibitor systems FXPT Drop-In Post Treatment Assembly FXSI Drop-In Chlorine Taste Odor, sediment reduction, IsoNet scale inhibitor systems HF High Flow for RO systems HF PLUS Increased Delivery Flow Rate for RO Systems IL In-line filter ILTO In-line filter, Taste & Odor ILTOS In-line filter, Taste & Odor, scale inhibitor MA Mineral Addition MP Multi-Point systems OP RO System with mineral addition OS OptiPure water softener

DefinitionCode P Parallel configuration PG Pressure Gauge PTS Sediment plus Isonet post treatment scale inhibition Q Qwik-Twist Cartridge QT Qwik-Twist Chlorine Taste Odor systems QTC Qwik-Twist Chlorine Taste Odor, Cyst systems QTI Qwik-Twist Chlorine Taste Odor, Isonet scale inhibitor systems QTPT Qwik-Twist Post Treatment Assembly QTSFT Qwik-Twist Softening systems QTSX2 Qwik-Twist Chlorine Taste Odor, ScaleX2 scale inhibitor systems QTTS Qwik-Twist Isonet leaves chlorine in water systems RFZ Radial Flow Carbon Cartridge RK Replacement Filter Kit, Espresso Mate Only S1 Sediment Filter 1 Micron cartridge S5 Sediment Filter 5 Micron cartridge SCLX2 ScaleX2 cartridge SFT Softening cartridge SX2 ScaleX2 scale inhibitor systems SXI Drop-in Sediment with Isonet scale inhibitor filter TWH Tankless Water Heater WS Softening resin (Espresso Mate Only) XSI Sediment reduction with Isonet scale inhibitor XTO Qwik-Twist Chlorine, Taste & Odor, Cyst filter XTOS Qwik-Twist Chlorine, Taste & Odor, cyst, Isonet scale inhibitor filter

WC Water Office Coffee Product H Head 1 1/4" push connection 3 3/8" push connection 5 for 5 micron. All other assumed to be 1 micron 8 8" length 10 10" length (small) 15 15" length (medium) 20 20" length (large) E larger capacity H Head l Inline L Lead Reduction PW Premium Water S Scale Reduction T threaded connection WCTO Water, Chlorine, Taste, Odor WCTOI Water, Chlorine, Taste, Odor, Isonet

Office Water & Coffee Abbreviations


INDEX

OptiPure Glossary of AbbreviationsOptiPure Index

Description List Price Page #Part #13203 FX Filter Wrench $8.00 3413217 FXB (Big Bowl) O-Ring $14.00 34130-61025 Sanit-ICE $669.00 27130-61050 ComAir 20T $2,416.00 27140-83016 SX2-12TWH $768.00 -150-50026 OptiClean $68.00 30,33160-00302 EM2+ $319.00 -160-00350 SX2-21 $415.00 32160-00401 EM4 $462.00 -160-00450 QTSFT-3 $720.00 16160-00460 QTSFT-3+ $1,372.00 16160-00520 FXWS-12B $446.00 -160-50003 FXTS-11 (not pictured) $178.00 32160-50004 FXTS-12 (not pictured) $242.00 32160-50010 FX-11 $228.00 9,18160-50011 FXPT-11CR $187.00 -160-50012 FX11+CR $529.00 20160-50015 FX-21 $395.00 -160-50020 FX-12 $281.00 9,16,18160-50022 FX-12B $465.00 -160-50025 FX-22 $480.00 9160-50027 FX-22CR $526.00 -160-50030 FX-22P $700.00 9160-50035 FX-22P+ $913.00 9160-50042 FX-22B $827.00 -160-50049 FX-22BCR $1,419.00 11160-50055 FX-22PCR+ $1,913.00 11160-50105 FXI-11 $233.00 13160-50110 FXI-12 $305.00 13160-50115 FXI-22 $508.00 13160-50120 FXI-22P $725.00 13160-50125 FXI-22P+ $997.00 -160-50129 FXI-22B $854.00 -160-50131 SX2-11 $291.00 -160-50133 SX2-12 $392.00 -160-50142 SX2-22 $695.00 15,32160-50143 SX2-22B $1,020.00 -160-50144 SX2-12B $582.00 -160-50185 FXI11+CR $553.00 20160-50301 FXAF01-12 (not pictured) $281.00 32160-50305 FXAF-12 $281.00 32160-50340 FXAF-12B $471.00 32160-50345 FXAF01-12B (not pictured) $471.00 32160-52009 QT10-1 $296.00 8,16,18160-52010 QT-1 $327.00 8,16,18160-52011 QTI10-1 $309.00 12,14160-52012 QTI-1 $342.00 12,14160-52014 QTC-1 $353.00 10160-52017 QTSFT-1 $276.00 -160-52075 QT5-1 $129.00 8,16160-52076 QTI5-1 $140.00 12,14160-52090 QTTS10-1 $279.00 33160-52101 SX2-QT $323.00 -160-52120 QTPT-1 $302.00 -160-52131 QTCR-1 $403.00 11160-52822 QTSX-2PG $614.00 15,16160-52890 BWS100 Bypass Kit (Not pictured) $75.00 22160-52900 Gauge/Flush QT-1 $154.00 -160-52904 QT-1 PG Kit $77.00 -160-52907 FX / QT Combo Kit $238.00 -

Description List Price Page #Part #160-52910 FX Flush Valve Kit (1/2") $75.00 -160-52912 QT Flush Valve Kit (3/8") $83.00 -160-52914 FXB Flush Valve Kit (3/4") $87.00 -160-52995 1/2" Flex-Connector Kit $78.00 -160-52997 1/2" x 3/8" Flex-Con Kit $76.00 -160-52998 3/4" Flex-Connector Kit $113.00 -160-91003 Single Head and Bracket QT $173.00 33164-00102 BWS100/2 $2,061.00 17,18,22164-00105 BWS100/5 $2,246.00 17,18,22164-00110 BWS100/10 $2,309.00 17,18,22164-00116 BWS100/16 $2,609.00 17,18,22164-00216 OP175/16 $4,105.00 20,24164-00225 OP175/50 $4,756.00 -164-01002 OP70/2 $1,552.00 -164-01005 OP70/5 $1,674.00 -164-01010 OP70/10 $1,783.00 -164-01016 OP70/16 $1,947.00 -164-01102 OP70CR/2 $1,572.00 -164-01105 OP70CR/5 $1,703.00 -164-01110 OP70CR/10 $1,812.00 -164-01116 OP70CR/16 $1,975.00 -164-01202 OPS70/2 $1,339.00 21164-01205 OPS70/5 $1,468.00 21164-01210 OPS70/10 $1,571.00 21164-01216 OPS70/16 $1,777.00 21164-01302 OPS175/2 $1,751.00 21164-01305 OPS175/5 $1,880.00 21164-01310 OPS175/10 $1,983.00 21164-01316 OPS175/16 $2,189.00 21164-01402 OPS175CR/2 $1,957.00 21164-01405 OPS175CR/5 $2,086.00 21164-01410 OPS175CR/10 $2,189.00 21164-01416 OPS175CR/16 $2,395.00 21164-01502 OPS70CR/2 $1,622.00 21164-01505 OPS70CR/5 $1,751.00 21164-01510 OPS70CR/10 $1,854.00 21164-01516 OPS70CR/16 $2,060.00 21164-01602 BWS 175/2 $1,983.00 -164-01605 BWS 175/5 $2,086.00 -164-01610 BWS 175/10 $2,215.00 -164-01616 BWS 175/16 $2,395.00 -164-14366 BWS350/16 $5,179.00 15,22164-14375 BWS350/50 $5,698.00 15,22164-14376 BWS350/50 HF $6,325.00 22164-14380 BWS350/175 HF $6,748.00 22164-14416 OP350/16 $4,767.00 20,24164-14450 OP350/50 $5,281.00 20,24164-14451 OP350/50 HF $5,903.00 20,24164-15545 BWS1500/50 $9,959.00 23164-15550 BWS1500/50 HF $10,998.00 23164-15575 BWS1500/175 HF $11,356.00 23164-15576 BWS1500/175 HF PLUS $11,653.00 23164-15580 BWS 1500/300 HF $11,734.00 23164-15581 BWS1500/300 HF PLUS $12,085.00 23164-81016 16 gals. Tank / RP Assembly $2,189.00 - 2L Buffer (OP175)164-81017 16 gals. Storage Tank / RP $2,371.00 Assembly 2L Buffer (BWS200, BWS350, OP350)

© OptiPure37

INDEX


Description List Price Page #Part #164-81018 16 gals. Buffer Tank Assembly / $566.00 - For Use with 3/4 hp RP 164-81019 16 gals. Buffer Tank Assembly / $679.00 - For Use with 1 hp RP 164-81055 50 gals. Storage Tank / RP $2,867.00 - Assembly 2.5 gals. Buffer (BWS200, BWS350, OP350) 164-85010 BPS100 Booster Pump Assembly $798.00 - for BWS100, OPS70, and OPS70CR 164-85015 BPA200 Booster Pump Assembly $962.00 - for OP175, OPS175, OPS175CR, and BWS200 164-85020 BPS-QT Booster Pump Assembly $962.00 - for BWS350 and OP350 164-88920 Switch, Level Float $234.00 -164-89100 RP Assembly Complete / Stand $1,541.00 - and 2L Buffer Tank 164-89116 RP Remote Mount Kit / RP $41.00 - Assembly w/ 2L Black Buffer 164-89150 RP Remote Mount Kit / RP $72.00 - Assembly w/ 2.5 gals. White Buffer 164-89200 RP Assembly Complete / Stand $1,595.00 - and 2.5 gals. Buffer Tank 164-89905 Approved Air-Gap Kit for RO $105.00 - Drain Line 164-89912 Dual Combi Oven Connection $139.00 - Manifold 164-89913 Adapter Kit, 3/8"-1/4" Auto $88.00 34 Shut-Off OP175 164-89938 PRV - Pressure Reducing Valve $189.00 34 Assembly with PG and BRKT 165-01003 OS.10 $1,684.00 25165-01004 OS.13 $1,772.00 25165-01006 OS.20 $1,861.00 25165-01009 OS.29 $2,011.00 25165-02048 Optisoft 48K $2,217.00 25165-03064 Optisoft 64K $2,366.00 25170-51005 QT-2+ $965.00 8,18170-51007 QTC-2+ $1,027.00 10170-51010 QTI-2+ $1,008.00 12170-52019 QT10-2 $653.00 8170-52020 QT-2 $757.00 8,18170-52021 QTI10-2 $682.00 12,14170-52022 QTI-2 $795.00 12,14170-52024 QTC-2 $790.00 10170-52029 QT10-3 $952.00 8170-52030 QT-3 $1,071.00 8170-52031 QTI10-3 $1,019.00 12170-52032 QTI-3 $1,120.00 12170-52034 QTC-3 $1,131.00 10170-52035 QT-4 $1,422.00 8170-52040 QT2+MP $1,761.00 19170-52042 QTI-4 $1,512.00 12170-52044 QTC-4 $1,512.00 10170-52045 QTC2+MP $1,842.00 19170-52051 QT-1+ $511.00 8170-52055 QTI-1+ $529.00 12170-52061 QTC-1+ $528.00 10170-52070 QT3MP $1,954.00 19170-52075 QTC3MP $2,117.00 19

Description List Price Page #Part #170-52080 QT1+CR $496.00 20170-52081 QTI1+CR $504.00 20170-52132 QTCR-2 $739.00 11170-52133 QTCR-3 $1,081.00 11170-52134 QTCR-4 $1,310.00 11170-91010 Manifold Assembly QT2 $469.00 33170-91013 Manifold Assembly QT3 $664.00 33170-91015 Manifold Assembly QT4 $890.00 33180-80180 H20 Express Water Test Kit $58.00 33180-81105 Water Test - Watercheck-OP $113.00 33180-85025 OptiPure TDS Meter $176.00 33204-44021 AMS-4021XLE Membrane $859.00 -204-52810 AMS-QT10 Membrane $198.00 -204-52820 AMS-QT15 Membrane $480.00 -204-53040 AMS-QT Membrane $732.00 -252-00119 S1-20 $20.00 -252-00120 S5-20 $20.00 -252-00210 CTO-10 $30.00 -252-00220 CTO-20 $50.00 -252-00310 CTOS-10 $46.00 -252-00320 CTOS-20 $77.00 -252-00810 PTS-10 (not pictured) $45.00 30252-00820 PTS-20 $67.00 -252-10010 S1-10 $11.00 -252-10020 S1-20 $17.00 -252-10110 S5-10 $11.00 -252-10120 S5-20 $17.00 -252-10405 S1-20B $81.00 -252-10410 S5-20B $75.00 -252-10807 PTS-7 $46.00 -252-10808 PTS-8 $46.00 -252-10810 PTS-10 $42.00 -252-10820 PTS-20 $65.00 -252-10840 PTS-20B $88.00 -252-20110 CTO-10 $28.00 -252-20120 CTO-20 $47.00 -252-20210 CTOS-10 $43.00 -252-20220 CTOS-20 $74.00 -252-20410 CTO-10B $55.00 -252-20420 CTO-20B $108.00 -252-20420 CTO-20B $108.00 -252-20510 CTOS-10B $72.00 -252-20520 CTOS-20B $141.00 -252-20605 CCM-20B $353.00 -252-20610 CCM-10 $52.00 -252-20620 CCM-20 $111.00 -252-60010 WS-10 $47.00 -252-60020 WS-20 $70.00 -252-60040 WS-20B $104.00 -252-60102 EM2RK $102.00 -252-60104 EM4RK $172.00 -252-60106 QTSFT3RK $318.00 -252-60108 QTSFT3+RK $416.00 -252-60110 SX21RK $127.00 -252-60115 SX22RK $197.00 -252-60124 SX22BRK $433.00 -252-60205 SCLX2-1 $100.00 -252-60210 SCLX2-2 $151.00 -252-60220 SCLX2-4 $325.00 -252-60230 SCLX2-6+ $372.00 -


INDEX


Description List Price Page #Part #252-70120 ILTO-10.38 $35.00 29252-70220 ILTOS-10.38 $38.00 29252-70255 ILMA-10.14 $54.00 -252-70260 ILMA-6.14 $42.00 -300-00082 RFZ-20 $75.00 -300-00750CS WCIS-10.14 $39.00 29300-00751 WCI-10.14 $33.00 -300-00752CS WCI-6.14 $31.00 29300-01612 MA-10 $58.00 -300-01613 MA-20 $73.00 -300-01614 MA-20B $109.00 -300-02102 BWT Head&Valve $249.00 17300-02106 Aquameter (not pictured) $321.00 17300-02651 PCQ-CW-12 $41.00 -300-02654 PCQ-WS-12 $40.00 -300-05110CS WCS-10 $51.00 28,31300-05111CS WC-10 $44.00 31300-05113CS WCS5-10 $50.00 28,31300-05114CS WCSL-10 $57.00 28,31300-05115CS WCPWS-10 $53.00 28,31300-05200CS WCTO-8 $53.00 28300-05201CS WCTOI-8 $55.00 28,31300-05210CS WCESL-15 $62.00 28,31300-05211CS WCES-15 $72.00 28,31300-05212CS WCE-15 $56.00 28,31300-05360 BWT Premium M $411.00 17300-05361 BWT Premium XL $629.00 17300-05802 S5-Q $84.00 -300-05803 CTO-Q5 $55.00 -300-05804 CTOS-Q5 $57.00 -300-05805 PTS-Q $91.00 -300-05821 CTO-Q10CR $113.00 -300-05828 CTO-Q10 Cartridge, Pre and Post $96.00 -300-05829 CTOS-Q10 $109.00 -300-05830 CTO-Q $116.00 -300-05831 CTO-QCR $130.00 -300-05832 CTOS-QCR $143.00 -300-05833 CTO-QCR2 $164.00 -300-05835 CTOS-Q $132.00 -300-05840 XTO-Q $132.00 -300-05850 MA-Q10 $93.00 -300-05855 MA-Q15 $109.00 -300-05860 SCLX2-Q $186.00 -300-05885 CSFT-Q $95.00 -300-05890 SFT-Q $106.00 -300-05911 H3T $34.00 29300-05912 H3 $34.00 29300-05913 H1 $49.00 29300-08010 CTO-CK10 $85.00 31300-08015 CTOS-CK10 $95.00 31300-08035 CTO-EK10 $98.00 30300-08045 CTOS-EK10 $107.00 30300-40005 Air Breather, 0.2m Hydrophobic $246.00 34300-72915 ComAir 20T - ComAir Lamp - Ozone $79.00 -340-50001 Buffer Tank, 1.4L Black $63.00 34340-50004 Buffer Tank, 2.5 gals. White $103.00 34340-72040 ACS 3, 120V with Status and ORP $7,958.00 26340-72041 ACS 1, 120V with Status and ORP $3,309.00 26340-72042 ACS 2, 120V with Status and ORP $7,222.00 26340-72043 ACS 1, 220V with Status and ORP $3,309.00 -

Description List Price Page #Part #340-72044 ACS 1, 120V Basic $1,769.00 -340-72045 ACS 1, 220V Basic $1,769.00 -340-72046 ACS 2, 220V with Status and ORP $7,222.00 -340-72047 ACS 2, 120V Basic $4,244.00 -340-72048 ACS 2, 220V Basic $4,244.00 -340-72049 ACS 3, 220V with Status and ORP $7,958.00 -340-72050 ACS 3, 120V Basic $5,056.00 -340-72051 ACS 3, 220V Basic $5,056.00 -340-72100 Airwaves System $578.00 -340-72901 Plumbing Bypass Manifold ACS 2 $1,399.00 -340-72902 Plumbing Bypass Manifold ACS 3 $1,747.00 -340-72903 Ambient Monitor $1,352.00 -340-72904 Handheld ORP $856.00 -340-72905 Replacement Ozone Cell and PS $134.00 -340-72906 Control PCB $195.00 -340-72907 Mazzei Checkvalve $22.00 -340-72908 Secondary Checkvalve $47.00 -340-72909 ORP Probe $588.00 -340-72910 ORP Control PCB $165.00 -340-72911 Air Filter $48.00 -340-72912 Airwaves Ozone Lamp Cold Cathode $81.00 -340-72913 Airwaves Ozone Lamp Germicidal $57.00 -340-72914 ComAir 20T - ComAir Lamp - Germicidal $110.00 -340-72916 ComAir 20T Remote Assembly $183.00 -340-72917 ComAir 20T Sensor Assembly $1,274.00 -514-00442 Blend Valve $376.00 -514-90440 Valve, Reject Flow Control Assembly $114.00 34 OP350, BWS350520-12006 Inlet Ball Valve - 3/4" $50.00 34520-12031 Inlet Ball Valve - 22P and 22P+ Models $34.00 34520-12055 Inlet Ball ValveExcept 22P and 22P+ Models $39.00 34520-12215 Inlet Ball Valve $32.00 34520-12216 Ball Valve, Elbow 3/8" MPT $18.00 -520-12218 Ball Valve, 3/8" MPT x 3/8" PTC $19.00 -520-12221 Valve, 3/8" PTC $21.00 -520-12223 Valve, Sample Port BWS200 & 350, OP350 $28.00 34520-12230 Valve, Bypass - Red Handle $56.00 -520-12235 Valve, Tank Inlet Divert, Blue Handle $51.00 -520-14501 Valve, Tank Shut-Off $39.00 34520-91203 Valve, Tank Float $49.00 -524-01025 Check Valve, 1/4" PTC $33.00 -524-01030 Check Valve, 3/8" PTC, Permeate $36.00 -524-01035 Check Valve, 1/2" PTC, Pressurized Water $32.00 -530-20018 Pressure Gauge BWS100,350, OP175, 350 $61.00 34530-20019 Pressure Gauge $49.00 34530-20090 Pressure Gauge BWS 1500 $110.00 34530-40112 Water Quality Monitor $144.00 -550-08730 Connector, 1/2" Stem x 1/2" Barb $9.00 34551-63021 Elbow, Membrane Reject 1/4" PTC OP175, BWS200 $7.00 34551-65210 Connector, Membrane Stem OP175, BWS200 $2.00 34564-02105 Flow Control, Capillary OP175, BWS200 $20.00 34580-00106 Poly tube Black 1/4 $1.00 34580-00110 Poly tube Blue 3/8 $2.00 34580-00111 Poly tube Green 3/8 $2.00 34584-00050 HOSE 1/2 ID FDA GRAY PVC B $5.00 34600-10051 FX 10" Sump with O-Ring $66.00 34600-10060 FX 20" Sump with O-Ring $86.00 34600-99003 FX O-Ring $6.00 34600-99009 FXB Filter Wrench $12.00 34600-99205 FX Pressure Relief Kit $8.00 34

© OptiPure39

WARRANTY

OptiPure Limited Warranty

OptiPure filtration system components and assemblies are warranted against defects in material and workmanship, when installed and operated in accordance with manufacturer’s recommended procedures and guidelines, for a period of 60 months from date of installation or 60 months from the date of original shipment, whichever comes first. Replacement filter cartridges and separation membranes are warranted for defects in material and workmanship only for a period of one year. Contact OptiPure customer service or go to www.optipurewater.com for a detailed copy of the warranty statement.

Obtaining Warranty Service:

To obtain warranty service the customer should:

1) Contact the authorized OptiPure dealer who supplied the product.

2) Call OptiPure’s customer service department for replacement parts and support.

Prices effective until 12/31/20 unless otherwise notified.

Freight: EX Works, FOB Roselle, IL.

Standard Domestic Minimum Order is $100 net. Drop ship fee is $10.

Notes:


Description List Price Page #Part #600-99206 FXB (Big Bowl) Pressure Relief Kit $10.00 34700-82014 Pump, 215GPH $441.00 -704-10345 Smart Pump 1hp $1,526.00 -704-39905 Brush Kit for Repressurization Pump $67.00 34704-70015 Permeate Pump $165.00 34704-90023 Replacement Pump Assembly $420.00 -

Description List Price Page #Part #714-10150 Solenoid Va

2 020 product catalog - optipure water · 2019. 12. 9. · 4 minerals – that are dissolved in...

Documents