1º eso unit 8 three dimensional works
DESCRIPTION
ÂTRANSCRIPT
Visual Arts
Teacher Simone
Architecture and Sculpture are the two mediums used by artists to express themselves through VOLUME.
There are 2 types of sculpture:
Free-standing sculpture: is a sculpture that can be observed from all sides.
Relief sculpture: is a sculpture that rests on a support, so that it has no back side.
The typical techniques for creating sculptures are:
Constructing
Carving
Modelling
Casting
Welding
Assembling
Carving consists in slowly removing small pieces of the material with a sharp tool called a chisel.
https://www.youtube.com/watch?v=gyWeksAo8VM
Modelling is a using hands and other tools to give form to a moldable materials, like clay or plasticine.
https://www.youtube.com/watch?v=mkmFWXMeq6s
https://www.youtube.com/watch?v=dU0vdP043jQ
Casting is a process which is used to make many copies of the same figure.
First, it consists of making a figure through modelling.
Then, a mold is made of the figure.
The mold is then filled with a liquid like bronze or plaster to make a final figure.
https://www.youtube.com/watch?v=3r5gEZwurQM
Welding is when we put two pieces of metal together to make a structure.
http://www.youtube.com/watch?v=RyLvVMg84xs
Assembling is a technique similar to making a 3-dimensional collage. It consists in combining pre-existing elements in order to create a new figure.
https://www.youtube.com/watch?v=I-JCJ6VEaKs
Constructing is a technique of building with sculptural materials, like metal, wood, wire, etc.
https://www.youtube.com/watch?v=Sw66Gd_SXx0
In your table groups, create a voluminous sculpture using only paper!
STONES, like marble, is considered one of the premier sculpting materials.
WOOD is another material that a sculptor can carve. It is softer than stone, but it is less durable.
IRON is a metal that offers great possibilities to sculptors, because it can be cut, bent, welded, etc.
BRONZE is a very maleable material that can be given form through various processes.
The most common process is through using molds, which are filled with the molten (melted) bronze.
CLAY is a very moldable material. The clay is first molded when wet, and then it is baked in a special oven, called a kiln.