1965-66 e2 body kits - mustangdepot.com1965-66 e2 body kits as with all mustang depot fiberglass...

1965-66 E2 Body Kits

As with all Mustang Depot fiberglass parts, you can rest assured of

high quality, good fitting parts.

• These body components are being sold either as complete kits, or purchase the parts individually...

• Will fit 1965-1966 Fastbacks, Coupes or Convertibles (upper side scoops for Fastbacks only)

• Prices below do not include shipping and packaging charges.

List of Parts Included in Kit Below: headlight buckets, front lower valance, 1 piece upper nose, your choice of 5 different hoods, front fender flares, rear fender flares, side exhaust skirts, upper side scoops (fastbacks only), lower side scoops, spoiler trunk w/end caps … Part # Description Price

FS-ELN-E2CP

1965-66 E2 Body Kit Coupe or Convertible Grills Not Included Truck Freight Collect –Select Hood - $50 Box Charge

$3100.00/kit

FS-ELN-E2CPG

1965-66 E2 Coupe Body Kit with Grills Coupe or Convertible Same as FS-ELN-E2CP but includes Upper and Lower Billet Grills Truck Freight Collect –Select Hood - $50 Box Charge

$3455.00/kit

FS-ELN-E2FB

1965-66 E2 Fastback Body Kit Fastback Grills Not Included Truck Freight Collect –Select Hood - $50 Box Charge

$3425.00/kit

FS-ELN-E2FBG

1965-66 E2 Fastback Body Kit with Grills Fastback Same as FS-ELN-E2FB but includes Upper and Lower Billet Grills Truck Freight Collect –Select Hood - $50 Box Charge

$3780.00/kit

Please Note: Fiberglass body parts do not fit the same as stamped steel parts. While they can be finished to show quality, fiberglass body parts are built closer to race car standards than show car standards. We have come to this conclusion

after many years of installing and selling fiberglass body parts from many different manufacturers. Check fit before sanding or painting your new fiberglass pieces. If fiberglass parts have been sanded or painted they can no longer be

sold as new for either race or show purposes. For this reason, the manufacturer will not warranty such parts. Our policy for returning fiberglass parts is limited to the purchase price of the unit. All freight charges incurred are the responsibility of the purchaser/customer. For fiberglass hoods, removal of stock hood springs and use of a prop rod and hood pins are highly recommended. Mustang Depot is not affiliated with Ford Motor Company. All products herein are reproductions and not affiliated directly with either Ford or Shelby American unless noted. All Ford products are licensed by Ford through the

respective manufacturer. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Call 702-262-0011 Call 702-262-0011 Direct 702-262-0011 Fax 702-262-0099 M-F 9a-5p PST or visit our website 24/7 www.MustangDepot.com

Copyright 2006 Mustang Depot All Right Reserved. Prices are subject to change without notice. Version 1k 3/31/2010

1

E2 Body Kit Components

Fastback kit shown here

Part # Description Price

FS-ELN2-UN3

1965-66 E2 Upper Nose Assembly 3 Piece Kit Includes: 1pc E2 upper nose & set of headlight buckets New version is pre-molded as a one-piece upper $15 Box Charge This new version is much easier and less expensive to install. Also, improved fitment to fenders.

$648.95/kit

FS-ELN2-UN

1965-66 E2 Upper Nose 1 Piece New version is pre-molded as a one-piece upper nose $15 Box Charge You can cut and re-use stock buckets. This new version is much easier and less expensive to install. Also, improved fitment to fenders.

$449.95/ea

FS-ELN2-LN

1965-66 E2 Lower Nose/Apron Improved fitment $20 Box Charge $379.95/ea

FS-ELN2-HDLR

1965-66 E2 Hood Low Rise Truck Freight Collect $15 Box Charge (i.e. freight charges are due upon receipt of parts)

$489.95/ea

FS-ELN2-HDHR

1965-66 B9 Style Hood High Rise Cut open front of scoop to make functional Truck Freight Collect $15 Box Charge (i.e. freight charges are due upon receipt of parts)

$489.95/ea

FS-ELN2-FFL

1965-66 E2 Front Flare LH 1.25" $114.95/ea

FS-ELN2-FFR

1965-66 E2 Front Flare RH 1.25" $114.95/ea

FS-ELN2-RFL

1965-66 E2 Rear Flare LH 1.75" $124.95/ea

FS-ELN2-RFR

1965-66 E2 Rear Flare RH 1.75" $124.95/ea

$104.95/ea



2

FS-ELN2-HBL

1965-66 E2 Headlight Bucket LH These are what the headlight hardware and upper nose bolts to. You can cut-out and use the stock ones if they are not broken.

FS-ELN2-HBR

1965-66 E2 Headlight Bucket RH These are what the headlight hardware and upper nose bolts to. You $104.95/eacan cut-out and use the stock ones if they are not broken.

FS-ELN2-LSL 1965-66 E2 Lower Side Scoop LH Driver Side $134.95/eaFS-ELN2-LSR 1965-66 E2 Lower Side Scoop RH Passenger Side $134.95/eaFS-ELN2-USL 1965-66 E2 Upper Side Scoop LH Fastback Only $159.95/eaFS-ELN2-USR 1965-66 E2 Upper Side Scoop RH Fastback Only $159.95/ea

FS-ELN2-SS

1965-66 E2 Side Exhaust Skirt Set For use with E2 Flares $10 Box Charge

$420.00/pr

FS-M-7001SS

1965-66 Side Exhaust Skirts For use without E2 Flares $10 Box Charge

$420.00/pr

FS-M110

New 1964-66 4pc Ground Effects Kit (includes 2ea side skirts, and 2ea rear corners) for use without flares. Matches spoiler on our E2 upper nose above – Can be substituted for side exhaust in kits above $10 Box Charge

$329.95/set

FS-656TK1

1965-66 Spoiler Trunk w/End Caps- Fastback $15 Box Charge $459.95/ea

FS-656TK2

1965-66 Spoiler Trunk w/End Caps- Coupe/Conv $15 Box Charge $469.95/ea



3

http://www.mustangdepot.com/OnLineCatalog/Fiberglass/e2ls.htm

http://www.mustangdepot.com/OnLineCatalog/Fiberglass/e2ls.htm

http://www.mustangdepot.com/OnLineCatalog/Fiberglass/e2us.htm

http://www.mustangdepot.com/OnLineCatalog/Fiberglass/e2us.htm

We are not responsible for offset/backspacing. Make sure to check clearances prior to ordering! For Custom Backspacing, please allow 4-6 weeks for delivery. Spinners are Included but lug nuts are separate! Please specify custom backspacing required requirements in the "COMMENTS" section of the checkout order form or call. When selecting custom backspacing, these are "custom" made Special Order wheels and cannot be returned for any reason. PART # SIZE FINISH PATTERN Price

AR-427-8165 18x10 427 Series Polished Rim/Painted Center 5-4.5 $399.95/ea




AR-427-7965 17x9.5 427 Series Polished Rim/Painted Center 5-4.5 $384.95/ea


AR-427-7866-45 17x8 4.5” BS 427 Series Polished Rim/Painted Center 5-4.5 $369.95/ea

AR-842042 1/2" Chrome Acorn Lug Nut Set/20 $19.95/set

PART # SIZE FINISH PATTERN Price

AR-427P-8165 18x10 427P Series Polished Rim/Polished Center 5-4.5 $469.95/ea




AR-427P-7965 17x9.5 427P Series Polished Rim/Polished Center 5-4.5 $439.95/ea


AR-842042 1/2" Chrome Acorn Lug Nut Set/20 $19.95/set



4

Bullet Mirrors Show car quality mirrors, made in America. Exact copy of Rotunda mirror offered years ago. Includes two styles of pads (Mustang and Cobra versions), mounting hardware and positioning templates...


C5RZ-17696-A 1965-67 Bullet Mirrors $117.95/ea

VPS-LK2

1965-66 "E2" Light Kit Includes: 1 set of AL-HL2T 7" Tri-Bar Headlights with integrated turn signals, 1 set VPS-NV503W small lights next to headlights. 1 set VPS-PL2020C small lights in lower apron, 1 set VPS-NS2140DK 5.5" Lower Center Driving Lights. Note: Small lights can be reversed from upper nose to lower valance. NO SUBSTITUTIONS

$344.95/kit

ACC-9030-Lock Accessory Lock Kit $9.95/kit

B-9030-COBRA 1965-73 Billet Aluminum Gas Cap - Cobra $96.95/ea

B-9030-P 1965-73 Billet Aluminum Gas Cap - No Emblem $84.95/ea

B-9030-H 1965-73 Billet Aluminum Gas Cap - Running Horse $89.95/ea

B-9030-GT 1965-73 Billet Aluminum Gas Cap - GT $89.95/ea

B-9030-COBRA-BK 1965-73 Black Billet Aluminum Gas Cap - Cobra $96.95/ea

B-9030-P-BK 1965-73 Black Billet Aluminum Gas Cap - No Emblem $84.95/ea

B-9030-H-BK 1965-73 Black Billet Aluminum Gas Cap - Running Horse $89.95/ea

B-9030-GT-B 1965-73 Black Billet Aluminum Gas Cap - GT $89.95/ea

D1ZZ-9030-C 1971-73 Mach I Pop Open Gas Cap New High Quality Reproduction by Scott Drake (used for side filler option) $139.95/ea

CSX-9030-A

AC COBRA ROADSTER GAS CAP: 31/2", roller latch LeMans fuel filler cap. Polish finish (used for side filler option) $149.95/ea



5

http://www.mustangdepot.com/OnLineCatalog/images/Electrical/AL-HL2T.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Electrical/nv-503w.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Electrical/pl2020c.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Electrical/NS-2160.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Electrical/NS-2160.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Fuel/acc-9030-LOCK.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Fuel/B-9030-COBRA.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Fuel/B-9030-P.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Fuel/B-9030-H.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Fuel/B-9030-GT.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Fuel/B-9030-COBRA-BK.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Fuel/B-9030-P-BK.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Fuel/B-9030-H-BK.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Fuel/B-9030-GT-BK.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Fuel/215488F-a.jpg

MD-FBSFK

1965-68 Mustang Fastback Side Filler Kit Great for E and E2 Fastbacks wanting the side filler gas cap/inlet (slight shortening may be required for 1965-66 model cars depending on cap placement)

$209.95/kit

TZ-2274-FP 1965-66 E2 Billet Grill - Upper $199.95/eaTZ-2275-FP 1965-66 E2 Billet Grill - Lower $159.95/ea

TZ-2307 1965-66 E2 Lower Side Scoop Grill Set - Fully Polished $89.95/set

TZ-2306

1964-70 Cowl Hood Billet Grill - Fully Polished Only very slight trimming depending on the manufacturer, may be required. $119.95/ea


ML-MK3-Kit 1964-73 Motolita Steering Wheel Kit- Real Mahogany Rim! (Polished Adaptor Kit, Horn Kit and Horse Emblem Included) $359.95/kit

LC- MK4-Kit 1964-73 Motolita Steering Wheel Kit- Real Black L eather Rim! (Polished Adaptor Kit, Horn Kit and Horse Emblem Included) $359.95/kit ,

Whether you’re working on Steel, SMC, FRP, fiberglass, rigid plastic, semi-rigid plastic, flexible plastic or panel bonding, Norton SpeedGrip Urethane Structural Adhesive gets the job done. This product will help to reduce the potential for cracking when bonding fiberglass to metal. While retaining flexibility after curing, it can be sanded and painted. Yes you can use it as the filler instead of bondo. Ideal for bonding on the flares, skirts, and side scoops on our E & E2 Body Kits. Can also be used in place of 2 way adhesive tapes commonly used on late model side scoops and skirts. Part # Description Price 636425-04616 Speed Grip 5 Minute Set Time (2ea tips included) $39.95/ea 636425-04617 Speed Grip 15 Minute Set Time (2ea tips included) $39.95/ea 636425-04627 Speed Grip Self Mixing Tips $7.95/ea 636425-41400 Speed Grip Heavy Duty Manual Applicator Gun $69.95/ea



6

TCP’s Coilover Conversion Kit is the definitive solution for improving the handling of your classic automobile. Using current technology, materials and racetrack proven techniques, we are able to offer a suspension package that even the most modest of drivers can benefit from. You can now enjoy the security, confidence and handling characteristics of a newer vehicle without making irreversible modifications to your classic automobile.

TCP Design

Our use of TIG welded, tubular steel control arms and Kevlar Injection Molded Rod Ends, prevent much of this deflection.

The tubular control arms resist the twisting and bending that the stamped design is subject to. The state of the art rod ends create an extremely precise pivot point that ensures accurate travel throughout the suspensions range of motion.

We have also made corrections to the original geometry of the suspension. Our design induces negative camber as the suspension loads, which keeps more of your tire's contact patch on the road. The upper ball-joint angle has also been corrected to prevent binding at the top of the travel arch. The lower mount of the shock is relocated to the strut rod plate at the lower control arm. This modification effectively transfers the weight of the vehicle closer to the pivot axis of the spindle, which eliminates the flex normally induced upon the upper control arm.

Vari Shock Coilovers

The QA1 shock absorber is machined from 6061 T-6

billet aluminum stock, which provides superior heat dissipation, maximum strength and quality appearance. Special features are easy six-position compression and six-position rebound damping adjustments, an internally vented oil chamber which protects the top seal from excess pressure and stops leakage, nitrogen gas charging for fade-free damping and consistent operation, and hydraulic anti-topping. Bottom threaded nut quickly changes spring preload to adjust ride height.


TCP-COLV65-66 1965-66 TCP Coilover Spring Conversion $2485.00



7

TCP Rack and Pinion

The cure for poor steering...

For many classic car enthusiasts, a car that isn't up to today's handling standards can sometimes taint the joy of ownership. Some owners are known to comment that they "love everything about their car, except the way it steers". TCP’s Rack & Pinion Kit is the cure for the poor steering characteristics of your classic car.

Precision Operation... Our Rack & Pinion Kit eliminates the "play" in the steering system. By using a more direct gearing system than the factory steering box we have enabled a more efficient transfer of energy. As you turn the steering wheel the steering shaft turns the pinion gear. The pinion gear is in direct contact with the rack gear. The centerlink, which the inner tie-rods bolt to, is bolted directly into the rack gear. This simplified gearing system gives the steering a tight, direct feel that the factory steering box is incapable of.

Factory Steering... The factory steering box uses a worm and sector gearing system that is very susceptible to wear. As the worm gear turns, the contact edges

slide along the surface of the sector gear and consequently wear these surfaces down. After some use this sliding action creates slack between the gears which translates into unwanted "play" at the steering wheel. This "play" creates a delay in the control of the front wheels.

Rack & Pinion... A pinion and rack gear are less susceptible to wear. As the pinion gear turns it pushes against the rack gear which reduces the

sliding action. Reduced wear insures increased precision by maintaining a tight fit. This precision provides immediate control and feedback from the front wheels.

Quicker Ratio... A quicker ratio means fewer turns of the steering wheel while maintaining the same turning radius. Our Rack & Pinion requires only 3 turns from lock to lock. The factory steering systems were a slow responding 4 turns. A more sensitive steering system will get you pointed in the right direction in less time. You will enjoy quicker turning response and more confidence in all types of driving situations.

Highest Quality... Every component is manufactured from the highest quality materials available. Billet steel construction of the internal gears, stainless steel lines, durable rubber boots, grade 8 mounting hardware combined to give you a reliable and quality steering system. Easy Installation... This kit has been designed for the easiest possible installation. Whenever possible, factory mounting locations are used and extensive cutting is avoided. We provide detailed installation instructions with photos to make the installation as straightforward as possible. For those other than textbook installations we have free tech support available during business hours. Our rack will clear most aftermarket headers and work with small or big block engines. Improve the steering characteristics of your classic automobile! Order today! Starts at $1398.00 Manual Starts at $2098.00 Power



8

TCP Subframe Connectors Fits: 1964 1/2 - 1970 Mustang and Cougar Coupe, Fastback & Conv.


TCP-DSL-01

1964-70 Drive Shaft Safety Loop $95.00/set

TCP-SUBFC-01

1964-70 Coupes/Fastbacks Subframe Connectors Kit 1 (outside section / weld-in) $229.00/set

TCP-SUBCS-01

1964-70 Coupes/Fastbacks Subframe Connectors Kit 2 (center section / bolt-in) $295.00/ea

TCP-SUBFC-02

1964-70 Convertible Subframe Connectors Kit 1C (outside / weld-in) $259.00/set

TCP-SUBCS-03

1964-70 Convertible Subframe Connectors Kit 2C $309.00/ea

TCP-PKG-SFC-01

1964-70 Coupes/Fastbacks Subframe Connectors Complete Package Kit (Includes driveshaft safety loop)

$498.00/ea

TCP-PKG-SFC-02

1964-70 Convertibles Subframe Connectors Complete Package Kit $539.00/ea

Shock Tower Braces

During cornering your car's chassis has a tendency to flex a great deal, allowing unwanted changes in its overall handling performance. Our Shock Tower Brace is designed to help eliminate unwanted flex, keeping your car's chassis properly aligned. By stiffening the shock towers to the firewall and shock tower to shock tower, you vehicle stays tight and goes where you point it. Left & Right Rod Ends offer complete adjustability to help you dial-in desired handling characteristics. Part # Description Price

TCP-TWRB-01 1964-70 Mustang Tower Brace Kit 1 (Export Brace Portion) $198.00/kit

TCP-TWRB-02 1964-70 Mustang Tower Brace Kit 2 (Monte Carlo Bar Portion) $149.00/kit

TCP-TWRB-03 1964-70 Mustang Tower Brace Kit 3 (Tie’s in Kit #1 to Kit #2) $139.00/kit

TCP-TWRB-123 Mustang Tower Brace Kit Set 1,2 & 3 $459.00/kit



9

All instructions included...

All Kits: 2 1/16" Volt, Water Temp, Oil Press, & Electric Fuel Gauge (Matches Stock Sender)

Available 3 3/8" Speed/Tach

For ease on installation, the "Instrument Panel Wiring Loom" is highly recommended. (Available at bottom of order table) Wiring Loom plugs into stock underdash harness

No drilling required

Uses stock sending units where applicable

Glove Box Insert (now available) Part # Description Bezel-Face Price

JME-656GBI 1965-66 JME Aluminum Glove Box Door with Aluminum Insert Sold Separately . $224.95/ea

JME-WH6566 1965-66 JME Wiring Harness for Gauge Cluster Sold Separately . $149.95/ea

JME-PGC5-CC 1965-66 JME 5 Gauge Bezel Only (no gauges) Camera/Case Black $484.95/ea

JME-PGC5-BA 1965-66 JME 5 Gauge Bezel Only (no gauges) Brushed/Aluminum $484.95/ea

JME-PGC5-DLX-BZL

1965-66 JME 5 Gauge Bezel Only (no gauges) Deluxe Woodgrain matches stock decals Deluxe Woodgrain $484.95/ea

JME-PGC6-CC 1965-66 JME 6 Gauge Bezel Only (no gauges) Camera/Case Black $484.95/ea

JME-PGC6-BA 1965-66 JME 6 Gauge Bezel Only (no gauges) Brushed/Aluminum $484.95/ea

JME-PGC65-DLX-BZL

1965-66 JME 6 Gauge Bezel Only (no gauges) Deluxe Woodgrain matches stock decals Deluxe Woodgrain $484.95/ea

AM-UL6566M 1965-66 Auto Meter UltraLight Silver Face 6 Gauges Only Kit 160 mph Mechanical Speedo, 10k tach, fuel, volts, water, oil

Bezel sold separately. $449.95/kit

AM-PT6566M

1965-66 Auto Meter Phantom White Face 6 Gauges Only Kit 160 mph Mechanical Speedo, 10k tach, fuel, volts, water, oil (Please note: Phantom Gauges now come with Black Rings, not the silver ones pictured)


AM-UL6566 1965-66 Auto Meter All Electric UltraLight Silver Face 6 Gauges Only Kit 160 mph electric speedo w/sender, 10k tach, fuel, volts, water, oil


AM-CF6566 1965-66 Auto Meter All Electric Carbon Fiber 6 Gauges Only Kit 160 mph electric speedo w/sender, 10k tach, fuel, volts, water, oil


AM-PT6566

1965-66 Auto Meter All Electric Phantom White Face 6 Gauges Only Kit 160 mph electric speedo w/sender, 10k tach, fuel, volts, water, oil (Please note: Phantom Gauges now come with Black Rings, not the silver ones pictured)




10

http://www.mustangdepot.com/OnLineCatalog/images/Interior/Brushed-GBX.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Interior/6566_harness3.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Interior/65-66STD.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Interior/jme65-1.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Interior/65-66DLX.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Interior/65-66DLX.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Interior/6566_camera1.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Interior/6566_brushed_ultralite.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Interior/65-66dlx6.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Interior/65-66dlx6.jpg


http://www.mustangdepot.com/OnLineCatalog/images/Interior/6566_carbon.jpg


http://www.mustangdepot.com/OnLineCatalog/images/Interior/6566_camera1.jpg

http://www.mustangdepot.com/OnLineCatalog/images/Interior/6566_carbon.jpg

Side Exhaust Kits

Fig. A Fig. C Fig. D

Fig. B

Dr Gas Tip New E Tip! • The Dr Gas side exhaust kits are designed to run with your 65-04 Mustang making 12 more horsepower than Walker

Race Bullets and noticeably quieter. The Dr Gas kit uses Spintech mufflers with mandrel bent tubing.. The tubing is flattened to go under subframe connectors (see Fig. A). The size of the Dr Gas tip is dim 5.5" x 2" (See Fig. B). Options include tube sizes 2.5" and 3", addition of X-Pipe technology with long or short tube headers...

• The new Side Exhaust with Cast Aluminum E Tips is uniformly contoured to the exhaust hole on the side skirt (See Figure C) This is the same kit as above using the E tip. These work with both the 1967-68 E Body Kit and the 1965-66 E2 Body Kit. The cast has flattened contour to go under subframe connectors and pre-tapped holes for securing the tip with hangers. (See Figure D). Please Note: If you are using TCP-SFKit2, it is very close to the center section and you will have to fabricate new exit tubes between the mufflers and tips. On all cars, it's expected that some modification will be necessary to the Dr Gas exit tube that comes out of the muffler to meet the tip, as these tips were not specifically designed for the Dr Gas Exhaust Kit. The rocker area will need to be modified for the exhaust tip to exit comfortably. You would cut the outer rocker slightly larger than the hole opening and weld in fillers so the inner rocker is not exposed. It's a good idea to trim the pinch weld where the tip would run underneath. The hole opening is the same between the Maier E Kit skirts and the E2's skirts. Convertibles require a special pipe so please call prior to ordering.


S7MS-5255-E E Tip Set 2.5" Inlet Cast Aluminum - Polished Tip Opening $309.95/set

PMS-SX6100-SPEC1 1965-04 Side Exhaust Kit 2.5" Tubing w/E Tips from behind the X pipe pictured above and back $769.95/set

PMS-SX6100-SPEC2 1965-04 Side Exhaust Kit 2.5" Tubing w/X-Pipe & E Tips for Shorty Headers (pictured above) $1049.95/set

PMS-SX6100-SPEC3 1965-04 Side Exhaust Kit 2.5" Tubing w/X-Pipe & E Tips for Long Tube Headers $1069.95/set

PMS-SXD6130-SPEC1 1965-04 Side Exhaust Kit 3" Tubing w/E Tips from behind the X pipe pictured above and back $899.95/set

PMS-SXD6130-SPEC2 1965-04 Side Exhaust Kit 3" Tubing w/X-Pipe & E Tips for Long Tube Headers $1094.95/set

All JBA Headers come standard with 14 gauge steel nickel/chrome finish, hardware gaskets, instructions and a limited lifetime manufacturers warranty…

JBA-1650 Add JBA Headers 289, 302 $499.95/set

JBA-1653 Add JBA Headers 351W $599.95/set



11

Paxton Supercharger Kit


PA-1001839

1964-1968 Mustang 289, 302 NOVI 1200 Satin Finish, Passenger Side Supercharger Mount Call for best price 702-262-0011

Call

PA-1001839-P

1964-1968 Mustang 289, 302 NOVI 1200 Polished Finish, Passenger Side Supercharger Mount Call for best price 702-262-0011

Call

PA-1001840

1964-1968 Mustang 289, 302 NOVI 1200 Satin Finish, Driver Side Supercharger Mount Call for best price 702-262-0011

Call

PA-1001840-P

1964-1968 Mustang 289, 302 NOVI 1200 Polished Finish, Driver Side Supercharger Mount Call for best price 702-262-0011

Call

More products for your build are available on our site www.MustangDepot.com



12

http://www.mustangdepot.com/OnLineCatalog/Engine/pax-carb.htm




http://www.mustangdepot.com/

Mustang Depot Order Sheet

___________________________________________________________________ Ship To Address: (Cannot be a PO Box) First & Last Name : Street Address : City, State & Zip : Day Time Telephone # : Email Address : ____________________________________________________________________ Billing Address: (Required! Must match billing address on credit card) Name : Address : City, State & Zip : ____________________________________________________________________ Method of Pre-Payment: (No COD's) Card Type : Card Number : Expiration Date : ____________________________________________________________________ Year, Make & Model:(Please enter all info relative to your order) Part Number Description Qty Price TOTAL ___________________________________________________________________ I hereby authorize Mustang Depot to charge my credit card account for the parts listed above and including shipping & handling fees incurred in the transportation of the merchandise requested above. Returns within 30 days only, are subject to a 20% restocking fee. Shipping charges figured at 8% (.08) of the total sale and are non-refundable. Prices are subject to change without notice. Call for pricing and availability. Please include a copy of your driver’s license… Signature X______________________________ Print Name Here__________________________ Date ___________________

Mustang Depot 2510 E Sunset Rd #7 Las Vegas, NV 89120 Terms and Conditions


Copyright 2006 Mustang Depot All Right Reserved. Prices are subject to change without notice. Version 1j 10/31/2008

13

Contents Copyright © 1998-2008 Automotive Internet Retailers, LLC All rights reserved. Ford, Ford Mustang, Mustang GT, SVT Cobra, Mach 1 Mustang, Shelby GT 500, Cobra R, Bullitt Mustang, SN95, S197, V6 Mustang, Fox Body Mustang, and 5.0 Mustang are registered trademarks of Ford Motor Company. Saleen is a registerd trademark of


Copyright 2006 Mustang Depot All Right Reserved. Prices are subject to change without notice. Version 1j 10/31/2008

14

Saleen Incorporated. Roush is a registered trademark of Roush Enterprises Inc. Shelby is a registered trademark of Shelby American. Mustang Depot has no affiliation with Ford Motor Company, Roush Enterprises, Shelby American or Saleen. Throughout our website and catalogs, these terms are used for identification purposes only. All Ford logo products are licensed by Ford through the respective manufacturer. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Information and prices are subject to change without notice. Photos are for graphical representation only and may not be the exact product you are ordering. Sales taxes are applicable to Nevada residents. Thank you for choosing Mustang Depot Your access to and use of the Mustang Depot, including any purchase made using our web site is exclusively governed by these terms and conditions and any others contained on this web site (collectively, "Terms and Conditions"), as may be supplemented by applicable law. By accessing, using or purchasing products from Mustang Depot, you agree to be bound by the Terms and Conditions. The Terms and Conditions may be changed at any time without prior notice. We will make changes by modifying our web sites. Your continued access to or use of the modified web sites conclusively demonstrates your acceptance of those changes prospectively. No other provisions or changes are binding upon us unless reduced to writing and signed by an authorized Mustang Depot representative. If any provision of the Terms and Conditions or any application thereof is held to be invalid or unenforceable for any reason, that provision shall be deemed sever able and the remainder of the Terms and Conditions and the application of that provision in other situations shall not be affected. All pictures herein are for representation purposes only. Although we do our best to provide as clear and accurate pictures as possible, the picture may be of a product similar to the actual one (ie different year, etc) Some of the products we sell are for racing and off-road vehicle only, lighting products are solely as auxiliary lighting. Please check with your local DMV or vehicle department for regulations and information. Mustang Depot is not responsible for any legal issues regarding any of the products purchased from this site. For your own concern, please make sure of your orders and the legality of the product before making any purchases. We reserve the right, without liability or prior notice, to revise, discontinue, or cease to make available any or all products or to refuse or cancel any order.

Shipping Terms Mustang Depot will process all orders received the day after the order is received. We do not guarantee stock. If the item is currently available, the product will ship the day following the order date, with respect to the type of delivery service requested by the customer. (For example; If you order something on Monday selecting the Next Day Air Option, if the product is available, your order will be processed and shipped on Tuesday and you should receive it by Wednesday) This does not include weekends and holidays. We are not liable for shipping charges, for items that are not currently in stock. We will ship the item the manner in which it was ordered (i.e. Next Day, 2nd Day) whenever the product is or becomes available... There are no refunds given for shipping charges! We will do our best to fill orders that we don't have currently in stock. We have a network of affiliates, which allows us the ability to pursue the product from other sources. However, it is not too uncommon for nationwide backorders to be in effect due to manufacturer hold-ups on certain items. The term used herein as "Free Shipping" only applies to "Ship To" addresses within the continental USA only. When a product is deemed "Free Shipping," other shipping options including 3 Day, 2nd or Next Day Air, will have to be paid separately. On large items deemed "Truck Freight Collect" the bill for freight will be due upon arrival of the parts. Shipping charges are, in all cases, the complete responsibility of the customer and Mustang Depot will not be liable in any case for shipping charges incurred by the customer. This includes both from the origin to the customer and from the customer to the origin. We do not currently accept international orders...

Other Policies Special Order Items - Some items listed in this catalog are made to order by the manufacturer. These Special Order items require pre-payment by debit card, credit card, or wire transfer and are not returnable. Back Orders - Items temporarily out of stock will be placed on back-order unless you indicate that a refund should be made. All shipping charges on regular domestic orders are charged on the initial order, so back orders are shipped at no additional charge. Back ordered items usually are shipped within 30 days, however, availability can change and Mustang Depot reserves the right to cancel any back order and issue a refund. Refused Shipments - The customer is responsible for freight both ways on any shipment for which delivery is refused Sale Items - At no time are refunds given on items that may go on sale after purchase.

Warranty Disclaimer; Limitation of Liability Mustang Depot expressly disclaims, and the purchaser expressly assumes, responsibility for any incidental or consequential damages arising from any and all product failure, sold through Mustang Depot. Defective product liability is limited to the replacement/purchase price of the product and is provided by the manufacturer of the goods.. Any provision voided by state or other applicable law shall not act to enlarge other provisions of this warranty except as expressly required by law. Mustang Depot products are provided "AS IS." We do not make any representations or warranties, whether express or implied, regarding or relating to Mustang Depot or any associated hardware or software, including the content or operations of either. TO THE FULLEST EXTENT PERMITTED BY LAW, MUSTANG DEPOT DISCLAIMS ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MUSTANG DEPOT OR ANY OF ITS EMPLOYEES, DIRECTORS, OFFICERS, AGENTS, VENDORS OR SUPPLIERS (collectively, the "Mustang Depot parties") BE LIABLE FOR ANY DIRECT OR INDIRECT LOSSES OR DAMAGES ARISING FROM OR RELATED TO ANY PRODUCTS, SERVICES OR SOFTWARE PROVIDED HEREIN. This limitation of liability applies to all losses and damages of any kind whatsoever (whether general, special, consequential, incidental, punitive, exemplary, or otherwise, including loss of income, profits, or data), whether arising in contract, negligence or other tort theory, even if we have been advised of or should have known of the possibility of such losses or damages. The preceding Warranty Disclaimer and/or Limitation of Liability shall survive the failure of any exclusive remedy, but they may be prohibited or restricted by applicable law so they may not apply to you. YOU AGREE TO INDEMNIFY, DEFEND AND HOLD HARMLESS THE MUSTANG DEPOT PARTIES FROM AND AGAINST ANY AND ALL THIRD PARTY CLAIMS, DEMANDS, LIABILITIES, COSTS OR EXPENSES, INCLUDING REASONABLE ATTORNEYS' FEES, ARISING FROM OR RELATED TO ANY BREACH BY YOU OF ANY OF THE TERMS AND CONDITIONS OR APPLICABLE LAW, INCLUDING THOSE REGARDING INTELLECTUAL PROPERTY. All products herein are reproductions and not affiliated directly with either Ford or Shelby American unless noted. All Ford brand products are licensed by Ford through the respective manufacturer. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Information and prices are subject to change without notice.

Privacy Statement We consider the personal information you choose to share with us to be confidential. We do not share any personal or identifying information you submit directly or through our web sites with any unaffiliated third party, unless it is necessary to respond to your inquiry or required by law. We train our associates to respect and protect our customers' privacy. We limit our associates' access to information about you, and stress the importance of your privacy with our associates. If you just view our web sites, we do not collect any personal or identifying information about you. We do monitor the number of visits to our web sites, but only in the aggregate. This information is important for us to provide the best possible service to you.

Return Policy Within 30 days of your purchase, items can be returned to Mustang Depot via UPS for a refund. There is a 20% restocking fee imposed on all goods returned for a refund! In-Store Credits can be issued in the full amount of the product, less shipping charges! Shipping charges are always non-refundable! Either way, it's necessary to obtain a Return Goods Authorization (RGA) number from Mustang Depot. Obtaining an RGA number ensures that the return process is handled efficiently and that credits are issued in a timely manner. Within 30 days of receipt of items purchased from Mustang Depot customers may choose to return:

• Any new item in original packaging and original/unused condition • If you install the item(s), it will be deemed un-returnable. • Any used Core, as long as it is shipped in the box that contained the new product • Any item received in a damaged or defective condition • Any item received in a damaged or defective condition. • Any item received in error.

Goods Not Accepted for a Return • If you purchase a product and find it doesn't fit due to any modification to the car from stock (ie. Engine Swap, Transmission Swap) • No return on electrical parts, books, special order items, or items we disclaim in advance...

Obtaining a Return Goods Authorization Number When you plan to return items via UPS to Mustang Depot, it's necessary to obtain a Return Goods Authorization (RGA) number. RGA numbers help us process returns quickly and efficiently. Please Call (702) 262-0011 or email [email protected] for your RGA number request. Please include the reason for the return, date the order was placed, your order number, name, phone number, and shipping address. Returning Items to MustangDepot.com Simply take your package to any location that has regularly scheduled UPS pick-ups. You may want to check with your place of employment to see if they have regular UPS pick-ups. Or, you can call 1-800-PICK-UPS (1-800-742-5877) or visit the UPS Web site at www.ups.com/using/services/locate/locate.html. As long as your return address label is attached and the RGA number is included, it will insure the prompt and efficient handling of your return. Please note: you must insure the item with the carrier for the total amount of the sale! Credit and Return Shipping Costs Within 15 business days of receipt of your returned item, you will be issued credit for the original purchase price, plus applicable sales taxes, and less applicable re-stocking charges. Core credits will also be processed within 15 business days. If the reason for your return was caused by Mustang Depot, or one of our business partners (i.e., damaged or defective items, wrong part shipped), we will cover the freight charges on the replacement items. All other returns (i.e., didn't want, doesn't like) will be limited to the invoiced price less a 20% restocking fee, and less the shipping charges. In-store credits can be issued for the full purchase price of the goods, less shipping charges. Thank you for choosing Mustang Depot

mailto:[email protected]

http://www.ups.com/using/services/locate/locate.html

1965-66 e2 body kits - mustangdepot.com1965-66 e2 body kits as with all mustang depot fiberglass...

Documents