Job Name:Job Name:

Designer:

Noted

JDEASTON

RODNEYEATON

8.25.19

Sales:

Scale:

Date:

Revisions:

Date:

Date:

Date:

Date:

Customer Approval:

DaVinci Approval:

Sales Approval:

Production Approval:

x

x

x

x

Electrical hookup by others.

Electrical requirements: 120V or as indicated.

All landscaping by others.

This artwork is copyrighted, and the exclusive

property of DaVinci Sign Systems. It is the result

of the original work of its employees, and is

submitted to your organization for the sole

purpose of your consideration of whether to

purchase from DaVinci Sign Systems. Distribution

or exhibition of this artwork to anyone other than

employees of your organization, or the use of this

artwork to construct a similar sign is strictly

prohibited. In the event your organization fails to

comply with the stipulations outlined above,

DaVinci Sign Systems expects to be compensated

minimum $5000 for its original design work. At any

time you may purchase this artwork for $5000, at

which point you may use it however you see fit.

Without Changes

With Changes As Shown

1 3

DENVERMETROCHAMBERO F C O M M E R C E

Loveland Chamber

of Commerce

4496 Bents Dr.Windsor, CO 80550www.davincisign.com

Greeley (970) 353-8446

Rifle

Copyright 2019 DaVinci Sign Systems Copyright 2019 DaVinci Sign SystemsCopyright 2019 DaVinci Sign SystemsCopyright 2019 DaVinci Sign Systems Copyright 2019 DaVinci Sign SystemsCopyright 2019 DaVinci Sign Systems

TYPICAL END VIEWNON-ILLUMIANTED F.C.O. LETTERS & LOGO SCALE: 1/2”=1’-0”

QUANTITY: 1 MANUFACTURE AND INSTALL1A

1/2”

COLOR KEYCONCEPTUAL PLACEMENT VIEW OF PROPOSED SIGNAGEEXISTING CONDITIONS

This sign is intended to be installed in accordance with the requirements of Article 600 of the National Electrical Code. The location of the disconnect switch after installation shall comply with Article 600.6 (A) (1) of the National Electrical Code. 19-634

Threaded stud

Stud mounted. Graphic is projected with a spacer.

Fill hole with siliconeadhesive.

Spacer

16’-0”SIGN AREA - VERIFY

14’-6”

5’-

9”

2’-

11

”

1’-

1 3

/4”

8”

9”

1/2” P.V.C. LOGO PAINTED WHITE. #3630-69 DURANODIC VINYL OVERLAY. PIN MOUNT 1/2”OFF OF BRICK.

1/2” P.V.C. LOGO PAINTED WHITE. PIN MOUNT 1/2”1/2” P.V.C. LOGO PAINTED WHITE. PIN MOUNT 1/2”OFF OF BRICKOFF OF BRICK1/2” P.V.C. LOGO PAINTED WHITE. PIN MOUNT 1/2”OFF OF BRICK

1/2” P.V.C. LOGO PAINTED WHITE. PIN MOUNT 1/2”1/2” P.V.C. LOGO PAINTED WHITE. PIN MOUNT 1/2”OFF OF BRICK.OFF OF BRICK.1/2” P.V.C. LOGO PAINTED WHITE. PIN MOUNT 1/2”OFF OF BRICK.

Job Name:Job Name:

Designer:

Noted

JDEASTON

RODNEYEATON

8.25.19

Sales:

Scale:

Date:

Revisions:

Date:

Date:

Date:

Date:

Customer Approval:

DaVinci Approval:

Sales Approval:

Production Approval:

x

x

x

x

Electrical hookup by others.

Electrical requirements: 120V or as indicated.

All landscaping by others.

This artwork is copyrighted, and the exclusive

property of DaVinci Sign Systems. It is the result

of the original work of its employees, and is

submitted to your organization for the sole

purpose of your consideration of whether to

purchase from DaVinci Sign Systems. Distribution

or exhibition of this artwork to anyone other than

employees of your organization, or the use of this

artwork to construct a similar sign is strictly

prohibited. In the event your organization fails to

comply with the stipulations outlined above,

DaVinci Sign Systems expects to be compensated

minimum $5000 for its original design work. At any

time you may purchase this artwork for $5000, at

which point you may use it however you see fit.

Without Changes

With Changes As Shown

2 3

DENVERMETROCHAMBERO F C O M M E R C E

Loveland Chamber

of Commerce

4496 Bents Dr.Windsor, CO 80550www.davincisign.com

Greeley (970) 353-8446

Rifle

Copyright 2019 DaVinci Sign Systems Copyright 2019 DaVinci Sign SystemsCopyright 2019 DaVinci Sign SystemsCopyright 2019 DaVinci Sign Systems Copyright 2019 DaVinci Sign SystemsCopyright 2019 DaVinci Sign Systems

TYPICAL END VIEWNON-ILLUMIANTED F.C.O. LETTERS & LOGO SCALE: 1/2”=1’-0”

QUANTITY: 1 MANUFACTURE AND INSTALL1B

1/2”

COLOR KEYCONCEPTUAL PLACEMENT VIEW OF PROPOSED SIGNAGEEXISTING CONDITIONS

This sign is intended to be installed in accordance with the requirements of Article 600 of the National Electrical Code. The location of the disconnect switch after installation shall comply with Article 600.6 (A) (1) of the National Electrical Code. 19-634

Threaded stud

Stud mounted. Graphic is projected with a spacer.

Fill hole with siliconeadhesive.

Spacer

16’-0”SIGN AREA - VERIFY

14’-6”

5’-

9”

2’-

11

”

1’-

1 3

/4”

8”

9”

1/2” P.V.C. LOGO PAINTED MP BRUSHED ALUM. #3630-69 DURANODIC VINYL OVERLAY. PIN MOUNT 1/2” OFF OF BRICK.

1/2” P.V.C. LOGO PAINTED MP BRUSHED ALUM. 1/2” P.V.C. LOGO PAINTED MP BRUSHED ALUM. PIN MOUNT 1/2” OFF OF BRICKPIN MOUNT 1/2” OFF OF BRICK1/2” P.V.C. LOGO PAINTED MP BRUSHED ALUM. PIN MOUNT 1/2” OFF OF BRICK

1/2” P.V.C. LOGO PAINTED MP BRUSHED ALUM. 1/2” P.V.C. LOGO PAINTED MP BRUSHED ALUM. PIN MOUNT 1/2” OFF OF BRICK.PIN MOUNT 1/2” OFF OF BRICK.1/2” P.V.C. LOGO PAINTED MP BRUSHED ALUM. PIN MOUNT 1/2” OFF OF BRICK.

Job Name:Job Name:

Designer:

Noted

JDEASTON

RODNEYEATON

8.25.19

Sales:

Scale:

Date:

Revisions:

Date:

Date:

Date:

Date:

Customer Approval:

DaVinci Approval:

Sales Approval:

Production Approval:

x

x

x

x

Electrical hookup by others.

Electrical requirements: 120V or as indicated.

All landscaping by others.

This artwork is copyrighted, and the exclusive

property of DaVinci Sign Systems. It is the result

of the original work of its employees, and is

submitted to your organization for the sole

purpose of your consideration of whether to

purchase from DaVinci Sign Systems. Distribution

or exhibition of this artwork to anyone other than

employees of your organization, or the use of this

artwork to construct a similar sign is strictly

prohibited. In the event your organization fails to

comply with the stipulations outlined above,

DaVinci Sign Systems expects to be compensated

minimum $5000 for its original design work. At any

time you may purchase this artwork for $5000, at

which point you may use it however you see fit.

Without Changes

With Changes As Shown

3 3

DENVERMETROCHAMBERO F C O M M E R C E

Loveland Chamber

of Commerce

4496 Bents Dr.Windsor, CO 80550www.davincisign.com

Greeley (970) 353-8446

Rifle

Copyright 2019 DaVinci Sign Systems Copyright 2019 DaVinci Sign SystemsCopyright 2019 DaVinci Sign SystemsCopyright 2019 DaVinci Sign Systems Copyright 2019 DaVinci Sign SystemsCopyright 2019 DaVinci Sign Systems

This sign is intended to be installed in accordance with the requirements of Article 600 of the National Electrical Code. The location of the disconnect switch after installation shall comply with Article 600.6 (A) (1) of the National Electrical Code. 19-634This sign is intended to be installed in accordance with the requirements of Article 600 of the National Electrical Code. The location of the disconnect switch after installation shall comply with Article 600.6 (A) (1) of the National Electrical Code.

CONCEPTUAL PLACEMENT VIEW OF PROPOSED SIGNAGEEXISTING CONDITIONS

This sign is intended to be installed in accordance with the requirements of Article 600 of the National Electrical Code. The location of the disconnect switch after installation shall comply with Article 600.6 (A) (1) of the National Electrical Code.

CONCEPTUAL NIGHT VIEW

COLOR KEY

TYPICAL END VIEW

3” 5”

ALUMINUM WIREWAY PAINTED MPDARK BRONZE..

** NOTE: LOGO PROPORTIONS HAVE CHANGED TO BETTER FIT SIGN FACE AREAS **.** ALL COLORS TO BE APPROVED PRIOR TO PRODUCTION **.

** SURVEY FASCIA PRIOR TO PRODUCTION **

5” DEEP PAN/CHAN LOGO W/ BRONZE 313RETURNS. FACE TO BE WHITE ACRYLIC W/#3630-69 DURANODIC BRONZE VINYLOVERLAY. USE 2” BRONZE 313 TRIM CAP W/HURRICANE CLIPS. ILLUMINATE W/ WHITE L.E.D.’S AS REQUIRED.

5” DEEP PAN/CHAN LTRS. W/ BRONZE 313RETURNS. FACE TO BE WHITE ACRYLIC.USE 1” BRONZE 313 TRIM CAP. ILLUMINATE W/ WHITE L.E.D.’S AS REQUIRED.

S/F ILLUMINATED WALL SIGN SCALE: 1/4”=1’-0”

QUANTITY: 1 MANUFACTURE AND INSTALL1

970.203.9292WWW.DAVINCISIGN .COM

30’-0”

7’-1 3/4” 20’-3 1/4”

7’-

0”

5’-

7 1

/2”

2’-

2 3

/4”

1’-3 1/4”