1855. carpentry equipment...1855. carpentry equipment sale information number of items : 27 location...
TRANSCRIPT
-
1855. Carpentry equipment
Sale Information
Number of items : 27
Location : Geel (Belgium)
Start date : 21 April 2020 as from 17:00
End date : 05 May 2020 as from 18:30
Viewing day : 28 April 2020 from 15:00 to 17:00
BY APPOINTMENT ONLY
Winkelomseheide, 221-223
2440 Geel (BE)
Removal day : 15 May 2020 from 09:00 to 16:00
Winkelomseheide, 221-223
2440 Geel (BE)
WWW.AUCTELIA.COM
-
The General Terms and Conditions and the Specific conditions of sale apply to this online Auction
SPECIFIC CONDITIONS - 1855. Carpentry equipment
START DATE 21 April 2020 as from 17:00
END DATE 05 May 2020 as from 18:30
VIEWING 28 April 2020 from 15:00 to 17:00
BY APPOINTMENT ONLY
Winkelomseheide, 221-223
2440 Geel (BE)
REMOVAL 15 May 2020 from 09:00 to 16:00
Winkelomseheide, 221-223
2440 Geel (BE)
In order to be able to pick up the Lots, the total amount due has to be paid. The Lots can only be removed if the Buyer shows
on the removal day the proforma invoice and signs the delivery note.
WARNING: The Buyer is fully responsible for the dismantling, loading and transportation of the bought Lots.
WARNING: If Buyers do not collect their goods at the removal date, time and address mentioned above, extra storage and
transport costs will be charged.
AUCTION FEES Auction Fees (based on Final Selling Price per Piece)
- Amounts less than €15,000 17% of the final selling price
- Amounts more than €15,000 12% of the final selling price
VAT 21.00 % on the highest bid and/or accepted by the Seller and on the Auction fees
PAYMENT Within 3 business days of reception by e-mail of the proforma invoice, the Buyer must transfer the total amount due to the
bank account below and mention the invoice number:
Auctelia
ING 363-4520918-79 / IBAN : BE58 3634 5209 1879 / BIC BBRUBEBB
BNPPF 035-7704702-33 / IBAN : BE79 0357 7047 0233 / BIC : GEBABEBB
ORGANIZER AUCTELIA
Rue Emile Francqui 6/3 B-1435 Mont-Saint-Guibert, Belgique, 6
1435 Mont-Saint-Guibert (BE)
SUPERVISION This online Auction sale is held under the supervision of court Bailiffs Etude Bordet, 4031 Angleur-Liège.
EXTENSION OF
ONLINE AUCTIONIf there is at least one Bid within the last 5 minutes of a sale, the closing time is extended by 5 minutes until there is no more
Bid.
If no Bid has been placed on a Lot, then the closing time of the sale of this Lot is extended by 20 minutes.
ATTRIBUTION OF LOTS Within 48 hours of the closing of the Auction (Saturdays, Sundays and Belgian public holidays not included), the Candidate-
Buyer receives confirmation of purchase by e-mail on behalf of the Seller that the Sales contract has been materialised. If the
Candidate-Buyer has not received an e-mail of confirmation within this delay, this means that their Bid did not result in an
Attribution.
TERMS AND
CONDITIONSThe General Terms and Conditions and the Specific conditions apply to this online Auction, as you can find on the website
www.auctelia.com.
TO THE ATTENTION OF
THE CANDIDAT-
BUYER/BUYER
Lots are sold as they are, in the state they are in on the date of Attribution or of the Sales contract, with all the benefits and
burdens attached thereto. Auctelia SA and/or the Seller provide no guarantee relating to hidden or visible defects, nor does it
provide guarantees relating to the wholeness, quantities, the working and/or the usefulness. Defects of any nature
whatsoever, the disappointed expectations of the Buyer or third party buyers do not give right to compensations, damages
and/or settlement. Given that Lots can be viewed before the Sale or the Auction and that the Terms and Conditions are
known to the Buyer, the Buyer is deemed to have carefully examined the Lots, prior to purchase. The Buyer examines the
Lots at his own risk.
TRANSLATION In the case of a discrepancy between translations of these Specific conditions and the original French version of these
Specific conditions, the French version prevails.
-
Photos Description Start price
ID : 1855-001 Horizontal Sliding table saw Griggio CA400EMake : Griggio
Model : CA400E
Horizontal Sliding table saw
Make: Griggio
Model: CA400E
Year: 2005
Voltage: 400 V three-phase
Power engine blade: 5.5 kW
Trolley Length: 310 cm
Sawing width: 150 cm
Blade Diameter: 30 cm
Machine equipped with a blade Incizer
Reclining Blade
Digitized Machine
Weight: 805 kg
Machine with protective cover
Overall dimensions: 380 cm x 385 cm x 150 cm
Conditions: Tested
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
990,00 €
ID : 1855-002 Altendorf F-90 Horizontal Sliding table sawMake : Altendorf
Model : F-90
Horizontal Sliding table panel saw
Make: Altendorf
Model: F-90
Year: 1988
Voltage: 400 V three-phase
Power engine blade: 5.5 kW
Trolley Length: 310 cm
Sawing width: 125 cm
Blade Diameter: Max 35 cm
Weight: 805 kg
Machine with protective cover
Overall dimensions: 325 cm x 320 cm x 140 cm
Conditions: Tested
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
590,00 €
ID : 1855-003 Bi-Matic 2.2 PS EdgebanderMake : Bi-matic
Model : 2.2 CH
Edgebander
Make: Bi-Matic
Model: 2.2 PS
Year: 2005
Voltage: 380 V three-phase
Power: 8 A
Dimensions Size: 230 cm x 75 cm x 150 cm
Cabinet with leftover of carting covers included
Conditions: Not tested
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
1 200,00 €
https://www.auctelia.com/en/used-equipment/woodworking/saws/sliding-table-saws/horizontal-sliding-table-saw-griggio-ca400e/index/105480https://www.auctelia.com/en/used-equipment/woodworking/saws/sliding-table-saws/altendorf-f-90-horizontal-sliding-table-saw/index/105481https://www.auctelia.com/en/used-equipment/woodworking/gluing-machines/bi-matic-22-ps-edgebander/index/105482
-
Photos Description Start price
ID : 1855-004 Centauro 700 CO Band sawMake : Centauro
Model : 700 CO
Band saw
Make: Centauro
Model: 700 CO
Voltage: 220 V three-phase
Overall dimensions: 86 cm x 130 cm x 230 cm
Included with 1 spare saw
Conditions: Not tested, no plug
Remarks: removal and loading are to be borne by the buyer, to be reconditioned, no lifting
equipment on site
190,00 €
ID : 1855-006 Metal milling machine Calvet 020PMake : Calvet
Model : 020P
Metal milling machineMake: CalvetModel: 020PYear: 1997Voltage: 230 V single
phasePower: 4ADrilling Height: 10 cmOverall dimensions: 70 cm x 90 cm x 150
cmConditions: Not testedRemarks: Removal and loading are to be borne by the buyer, no
lifting equipment on site
100,00 €
ID : 1855-007 Calvet FWS237 Metal milling machineMake : Calvet
Model : FWS237
Metal milling machine
Make: Calvet
Model: FWS237
Year: 1997
Voltage: 230 V single phase
Power: 4.8 A
Overall dimensions: 165 cm x 65 cm x 160 cm
Conditions: Not tested
Remarks: Removal and loading are to be borne by the buyer, no lifting equipment on site
90,00 €
ID : 1855-008 Tomassi 652 Band Belt sanderMake : Tomassi
Model : 652.0
Band Belt sander
Make: Tomassi
Model: 652
Year: 1990
Voltage: 380 V three-phase
Power: 1.85 kW
Band width: 17cm
Overall dimensions: 130 cm x 45 cm x 115 cm
Conditions: Not tested
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
150,00 €
https://www.auctelia.com/en/used-equipment/woodworking/saws/band-saws/centauro-700-co-band-saw/index/105483https://www.auctelia.com/en/used-equipment/metalworking/metal-milling-machines/milling-universal-knee-and-column-type-milling-machine/metal-milling-machine-calvet-020p/index/105485https://www.auctelia.com/en/used-equipment/metalworking/metal-milling-machines/milling-universal-knee-and-column-type-milling-machine/calvet-fws237-metal-milling-machine/index/105486https://www.auctelia.com/en/used-equipment/woodworking/sanders/tomassi-652-band-belt-sander/index/105487
-
Photos Description Start price
ID : 1855-009 Festool CS70EB Circular saw on tableMake : Festool
Model : CS70EB
Circular saw on table
Make: Festool
Model: CS70EB
Voltage: 230 V single phase
Overall dimensions: 77 cm x 57 cm x 30 cm
Blade Diameter: 22 cm
Conditions: Not tested
90,00 €
ID : 1855-010 Contimac SB18 Column drilling machineMake : Contimac
Model : SB18
Column drilling machine
Make: Contimac
Model: SB18
Year: 1998
Voltage: 400 V three-phase
Power: 1.1 kW
Drilling Height: 45 cm maximum
Overall dimensions: 33 cm x 50 cm x 170 cm
Conditions: Not tested
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
90,00 €
ID : 1855-011 Contant Philips 7 02 Drill mortiserMake : Contant Philips
Model : 7 02
Drill mortiser
Make: Contant Philips
Model: 7 02
Voltage: 380 V three-phase
Overall dimensions: 95 cm x 70 cm x 120 cm
Conditions: Not tested
Included with drill bits in reserve
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
190,00 €
https://www.auctelia.com/en/used-equipment/woodworking/saws/circular-saws/festool-cs70eb-circular-saw-on-table/index/105488https://www.auctelia.com/en/used-equipment/metalworking/metal-saws/miscellaneous/contimac-sb18-column-drilling-machine/index/105489https://www.auctelia.com/en/used-equipment/woodworking/wood-mortising-machines/drill-mortising-machines/contant-philips-7-02-drill-mortiser/index/105490
-
Photos Description Start price
ID : 1855-012 Chip extractor unit 1 bagMake : Coral
Model : Handy2
Chip extractor unit
Make: Coral
Model: Handy2
Year: 1996
Voltage: 230 V single phase/380 V three-phase
Power: 1.5 kW
Weight: 53 kg
Number of bags: 1
Diameter Bag: 45 cm
Overall dimensions: 100 cm x 55 cm x 275 cm
Conditions: Not tested, no plug
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
30,00 €
ID : 1855-013 Coral Junior Chip extractor unit 1 bag on footMake : Coral
Model : Junior
Chip extractor unit 1 bag on feet
Make: Coral
Model: Junior
Voltage: 230 V single phase/380 V three-phase (mounted in 380)
Power: 2 hP
Number of bags: 1
Diameter Bag: 45 cm
Overall dimensions: 100 cm x 60 cm x 265 cm
Conditions: Not tested
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
30,00 €
ID : 1855-014 Soenen Hendrik Copy/B Universal copying milling machineMake : Soenen Hendrik
Model : Copy/B
Universal copying milling machine
Make: Soenen Hendrik
Model: Copy/B
Year: 1997
Voltage: 380 V three-phase
Power: 1.5 kW
Overall dimensions: 300 cm x 100 cm x 130 cm
Conditions: Not tested
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
150,00 €
https://www.auctelia.com/en/used-equipment/woodworking/dust-collectors-heating/chip-extractor-unit-1-bag/index/105491https://www.auctelia.com/en/used-equipment/woodworking/dust-collectors-heating/coral-junior-chip-extractor-unit-1-bag-on-foot/index/105492https://www.auctelia.com/en/used-equipment/metalworking/metal-milling-machines/milling-cnc-universal-milling-machines/soenen-hendrik-copyb-universal-copying-milling-machine/index/105493
-
Photos Description Start price
ID : 1855-015 Emmigi 200A Mitre sawMake : Emmigi
Model : 200A
Mitre saw
Make: Emmigi
Model: 200A
Year: 1997
Voltage: 380 V three-phase
Power: 0.55 kW
Weight: 30 kg
Overall dimensions: 45 cm x 50 cm x 145 cm
Conditions: Not tested
Included with a length guide of 270 cm
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
150,00 €
ID : 1855-016 Soenen Hendrik OM350 Mitre sawMake : Soenen Hendrik
Model : OM350
Mitre saw
Make: Soenen Hendrik
Model: OM350
Year: 1997
Voltage: 380 V three-phase
Power: 2.21 kW
Overall dimensions: 75 cm x 55 cm x 160 cm
Machine equipped with 2 roller tabels
Dimensions of Roller tabels:
2 x 300 cm x 32 cm x 96 cm
Conditions: Not tested
Included with 2 more discs
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
150,00 €
ID : 1855-017 Wegoma SE1-S Reinforcement Screw driverMake : Wegoma
Model : SE1-S
Reinforcement Screw driver
Make: Wegoma
Model: SE1-S
Year: 1996
Compressed air operation
Machine mounted on a metal bracket
Machine Dimensions: 60 cm x 60 cm x 175 cm
Included with 2 roller tabels
Tabels Dimensions: 2 x 150 cm x 25 cm x 100 cm
Conditions: Not tested
Remarks: removal and loading are to be borne by the buyer
50,00 €
https://www.auctelia.com/en/used-equipment/metalworking/metal-saws/miscellaneous/emmigi-200a-mitre-saw/index/105494https://www.auctelia.com/en/used-equipment/metalworking/metal-saws/miscellaneous/soenen-hendrik-om350-mitre-saw/index/105495https://www.auctelia.com/en/used-equipment/metalworking/pvc-tooling/reinforced-screwmachine/wegoma-se1-s-reinforcement-screw-driver/index/105496
-
Photos Description Start price
ID : 1855-018 Worktable for hand toolsWorktable for hand tools
Dimensions fold: 265 cm x 124 cm x 85 cm
Open Dimensions: 440 cm x 124 cm x 85 cm
Content not included
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
50,00 €
ID : 1855-019 Worktable for hand toolsWorktable for hand tools
Dimensions fold: 265 cm x 124 cm x 85 cm
Open Dimensions: 440 cm x 124 cm x 85 cm
Content not included
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
50,00 €
ID : 1855-020 Worktable for hand toolsWorktable for hand tools
Dimensions fold: 265 cm x 124 cm x 85 cm
Open Dimensions: 440 cm x 124 cm x 85 cm
Content not included
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
50,00 €
ID : 1855-021 3 Roller Tool trolleysRoller Tool trolleys
Quantity: 3
Dimensions of a tool trolley fold: 55 cm x 55 cm x 74 cm
Maximum height: 114 cm
Lot as on the pictures
30,00 €
ID : 1855-022 4 Roller Tool trolleysRoller Tool trolleys
Quantity: 4
Dimensions of a tool trolley fold: 55 cm x 55 cm x 74 cm
Maximum height: 114 cm
Lot as on the pictures
40,00 €
ID : 1855-023 2 Eder Muller DT Telescopic working TabelsMake : Eder Muller
Model : DT
2 Telescopic Working Tabels
Make: Eder Muller
Model: DT
Year: 1997
Quantity: 2
Overall dimensions: 178 cm x 100 cm x 95 cm
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
60,00 €
https://www.auctelia.com/en/used-equipment/construction/construction-others/worktable-for-hand-tools/index/105497https://www.auctelia.com/en/used-equipment/construction/construction-others/worktable-for-hand-tools/index/105498https://www.auctelia.com/en/used-equipment/construction/construction-others/worktable-for-hand-tools/index/105499https://www.auctelia.com/en/used-equipment/construction/construction-others/3-roller-tool-trolleys/index/105500https://www.auctelia.com/en/used-equipment/construction/construction-others/4-roller-tool-trolleys/index/105501https://www.auctelia.com/en/used-equipment/construction/construction-others/2-eder-muller-dt-telescopic-working-tabels/index/105502
-
Photos Description Start price
ID : 1855-024 Trolley for profileTrolley for profile
Overall dimensions: 650 cm x 170 cm x 210 cm
Lot as on the pictures
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
60,00 €
ID : 1855-025 Trolley with 2 tool trolleysTrolley with 2 tool trolleys
Trolley Dimensions: 150 cm x 54 cm x 75 cm
Lot as on the pictures
Remarks: removal and loading are to be borne by the buyer, no lifting equipment on site
50,00 €
ID : 1855-026 Lecot Roller trolleyMake : Lecot
Roller trolley
Make: Lecot
Weight: 60 kg
Overall dimensions: 60 cm x 78 cm x 152 cm
50,00 €
ID : 1855-027 Glass Trolley for side pickupGlass trolley
Dimensions: 310 cm x 25 cm x 240 cm
Quantity: 1
50,00 €
ID : 1855-028 Glass Trolley for side pickupGlass trolley
Dimensions: 200 cm x 40 cm x 220 cm
Quantity: 1
50,00 €
https://www.auctelia.com/en/used-equipment/handling-storage/others/trolley-for-profile/index/105503https://www.auctelia.com/en/used-equipment/handling-storage/others/trolley-with-2-tool-trolleys/index/105504https://www.auctelia.com/en/used-equipment/handling-storage/others/lecot-roller-trolley/index/105505https://www.auctelia.com/en/used-equipment/construction/construction-others/glass-trolley-for-side-pickup/index/105506https://www.auctelia.com/en/used-equipment/construction/construction-others/glass-trolley-for-side-pickup/index/105507
-
WHY SELL YOUR USED EQUIPMENT WITH AUCTELIA ?
QUALITY DEALS
Auctelia is deal-focused:95% of listed equipment have been sold. We only earn our fee if you make a sale.
BEST PRICE
Online auction is one of the best way to reach the market price.
You always win.
SHORT TIME
Online auction accelerates sales so you save time and stay focused
on your own business.
+31-85-4002222
+32-10-620660
www.auctelia.com/sell
Contact us!
References
95%
45.000+
of listed equipmenthave been sold
buyers & sellers
40 targetedcountries
+33-9-75-18-00-09