18-kmr-004 ktp-5 sell sheet v2 -...
TRANSCRIPT
TRANSPORT PLATFORM KTP-5A tool forthe trades. + Bring crew and materialto optimal height+ Work effi ciently withouta dedicated operator
TRANSPORT PLATFORM KTP-5A tool forthe trades. + Bring crew and materialto optimal height+ Work effi ciently withouta dedicated operator
CUSTOM PLATFORM
Twin Masts designed to accomodate specifi c material sizes. Allows easy transfer from truck to platform.
LANDING GATE
PERFORMANCE SPECIFICATIONS
SINGLE CAR - WITH COUNTERWEIGHT DUAL CARCapacity Range 4,500lbs (2,045kg) or 11 persons 4,000lbs per car (1,815kg) or 10 persons
Transport Car Size 5'x13' (1,524mm x 3,962mm) 5'x13' (1,524mm x 3,962mm) /each
Vertical Travel Speed - Variable 0-30ft/min (0.915m/min) 0-30ft/min (0.915m/min)
Maximum Free-Standing Height 72ft (22m) 72ft (22m)
Maximum Spacing Between Tie Anchors 50ft (15m) 50ft (15m)
Maximum Anchored Mast Height 330ft + (100m +) † 330ft + (100m +) †
Mast Height Above Last Anchor 20' (6m) 20' (6m)
Lowest Platform Height 71" (1,803mm) 71" (1,803mm)
DRIVE SPECIFICATIONS
Drive System Hydraulic rack-and-pinion drive As per single-car confi guration
Power System 26kW (35hp) gasoline engine or22kW (30hp) electric motor As per single-car confi guration
DRIVE UNIT SPECIFICATIONS
COMPONENT DIMENSIONS: L x W x H WEIGHTDrive Unit Gas 62" x 77" x 82" (1,575 x 1,956 x 2,083mm) 4,652lbs (2,110kg)
Mast Section 30" x 30" x 60" (762 x 762 x 1,524mm) 385lbs (175kg)
Transport Car 156" x 60" (3,962 x 1,524) 2,581 lbs (1,173kg)
Optional Roof 156" x 63" x 102" (3,962 x 1,600 x 2,591mm) 500lbs (226kg)
† Please contact Klimer if your project exceeds the maximum specifi ed height.
Nothing is out of reach.
Choosing a KTP-5 helps you:• Meet all of your material handling needs.
• Work more effi ciently with up to 4,500lbs load capacity and travel speeds of up to 30ft/min.
• Transport bulky materials with removable gates and spacious single or dual car platforms.
• Continuously feed material to your crews without a dedicated operator.
• Protect historical and sensitive facades with high freestanding design (up to 72ft).
Choosing a KTP-5 helps you:*• Meet all of your your access and material
handling needs.
• Work more effi ciently with up to 4000lbs load capacity and travel speeds of up to 30ft/min.
• Work at optimum height to increase production levels from 20% to 60%.
• Reduction of repetitive strain injuries
• Install and remove your platform up to 90% faster than any fi xed platform.
• Keep your workers safe. Guard-rail system moves with the platform for easy installation and reduced exposue to fall hazards.
• Reduce worker fatigue and lost time climbing scaff old or stairs.
• Save time and money by using up to 80% less wall ties.
* Compared to fi xed or suspended scaff old
• Double travel-limit switches on top, bottom and all opening gates.
• Redundant drive system includes four hydraulic motors with speed-limiting device.
• Auxiliary engine for emergency descent.
• Landing gates with mechanical interlocks
• Optional roof for overhead protection
• Full guard-rail reduces exposure to fall hazards
• 12V control voltage
A higher standard.Our platforms help you get the job done safer and faster while reducing your operating costs. When you choose a Klimer, you are not just choosing a platform; you are choosing a higher standard.
“What’s possible?” is a question we ask ourselves every day. We’re engineers, designers and
problem solvers partnering with clients to fi nd the most effi cient ways to take workers and
materials to hard-to-get-to places. Safer. Faster. With Klimer, nothing is out of reach.
KTP-5 Components & Confi gurations
Safety Features:
DUAL CAR - WITH OPTIONALROOF & STAGING PLATFORM
LEGEND1. DRIVE UNIT
2. TRANSPORT CAR - SINGLE
CAR SHOWN (DUAL CAR AVAILABLE)
3. MAST
4. COUNTERWEIGHT PLATFORM
5. GUARD RAIL
6. TIE IN SYSTEM
7. BASE TYPE - PEDESTAL SHOWN (CHASSIS AVAILABLE)
DUAL CAR(CHASSIS BASE)
4. COUNTERWEIGHT PLATFORM
6. TIE IN SYSTEM
7. BASE TYPE - PEDESTAL SHOWN (CHASSIS AVAILABLE)
1 2
7
3
45
6
TITLE:
CLIENT:
DATE:
DESIGNER:
COMPASS CREATIVE STUDIO INC
201-1040 south service rd
stoney creek, on L8E 6G3
www.compasscreative.ca
KMR_Logo_Reversed_CMYK
Klimer High Performance Platforms
December 2016
Nick Tenhage
CMYK
100/40/0/0
0/0/0/0
CANADA 1-888-526-3262 US [email protected] | klimer.com
IMPORTANT! Study operator's manual before use. Do not load above recommended safe working loads. Platform loads shown are based on uniformly distributed load including personnel and materials. Maximum 5 people. Extensions (E1) = 0-5 feet (1.5m). For longer extensions, loads will be reduced. Contact your Klimer representative for engineering services. No materials at any time to be placed on platform extensions. For configurations not shown above, consult your local Klimer dealer or operator's manual. This product must be used in conformity with industry safe use and best practices and applicable regulations, codes and ordinances. Specifications of products and equipment shown herein are subject to change without notice.
SINGLE CAR CHASSIS
DUAL CAR CHASSIS
SINGLE CAR PEDESTAL
DUAL CAR PEDESTAL
KTP-5 in Service Dimensions
B
G
F
HI
A
C
CHASSIS
KTP-5 IN SERVICE DIMENSIONS SINGLE AND DUAL CAR**
ITEM DESCRIPTIONCHASSIS
ftA
B
CD
E
FGHI
Unit Length
Overall cribbing footprint width
Total base width from building face
Counter Weight
Transport Car Dimensions
Ramp to face of wallFront & Rear outrigger extended lengthDistance between outrigger jacksOverall cribbing footprint length
20'-0" Single Car
16'-3/4" max.
18'-3"
5’-0”5’-0” - 13'-0" max.
18"4’-4”14’-11”20’-11”
m6.09m
4.90m
5.486m
1.52m1.52m - 3.96m max.
0.457m1.32m4.55m6.38m
20'-0" Single Car
6’-0”
13'-0"**
5’-0”
18"N/A5’-4”8’-0”
ft
KTP-5 in Service DimensionsSingle Car and Dual Car
DIMENSIONPEDESTAL
m6.09m
1.83m
3.96m**
1.52m
0.457mN/A1.63m2.44m
B
F
HI
A
PEDESTAL
DE
E
D E
C
CHASSIS
DUAL CARSINGLE CAR
PEDESTAL
B
G
F
HI
A
CE
E
B
F
HI
A
E
C
E E
15'-0" Dual Car 4.57m 15'-0" Dual Car 4.57m
TRA
NS
PO
RT
CA
R
5’-0” - 13'-0" max. 1.52m - 3.96m max.
G G
COUNTERWEIGHT
COUNTERWEIGHT
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
B
G
F
HI
A
C
CHASSIS
KTP-5 IN SERVICE DIMENSIONS SINGLE AND DUAL CAR**
ITEM DESCRIPTIONCHASSIS
ftA
B
CD
E
FGHI
Unit Length
Overall cribbing footprint width
Total base width from building face
Counter Weight
Transport Car Dimensions
Ramp to face of wallFront & Rear outrigger extended lengthDistance between outrigger jacksOverall cribbing footprint length
20'-0" Single Car
16'-3/4" max.
18'-3"
5’-0”5’-0” - 13'-0" max.
18"4’-4”14’-11”20’-11”
m6.09m
4.90m
5.486m
1.52m1.52m - 3.96m max.
0.457m1.32m4.55m6.38m
20'-0" Single Car
6’-0”
13'-0"**
5’-0”
18"N/A5’-4”8’-0”
ft
KTP-5 in Service DimensionsSingle Car and Dual Car
DIMENSIONPEDESTAL
m6.09m
1.83m
3.96m**
1.52m
0.457mN/A1.63m2.44m
B
F
HI
A
PEDESTAL
DE
E
D E
C
CHASSIS
DUAL CARSINGLE CAR
PEDESTAL
B
G
F
HI
A
CE
E
B
F
HI
A
E
C
E E
15'-0" Dual Car 4.57m 15'-0" Dual Car 4.57m
TRA
NS
PO
RT
CA
R
5’-0” - 13'-0" max. 1.52m - 3.96m max.
G G
COUNTERWEIGHT
COUNTERWEIGHT
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
B
G
F
HI
A
C
CHASSIS
KTP-5 IN SERVICE DIMENSIONS SINGLE AND DUAL CAR**
ITEM DESCRIPTIONCHASSIS
ftA
B
CD
E
FGHI
Unit Length
Overall cribbing footprint width
Total base width from building face
Counter Weight
Transport Car Dimensions
Ramp to face of wallFront & Rear outrigger extended lengthDistance between outrigger jacksOverall cribbing footprint length
20'-0" Single Car
16'-3/4" max.
18'-3"
5’-0”5’-0” - 13'-0" max.
18"4’-4”14’-11”20’-11”
m6.09m
4.90m
5.486m
1.52m1.52m - 3.96m max.
0.457m1.32m4.55m6.38m
20'-0" Single Car
6’-0”
13'-0"**
5’-0”
18"N/A5’-4”8’-0”
ft
KTP-5 in Service DimensionsSingle Car and Dual Car
DIMENSIONPEDESTAL
m6.09m
1.83m
3.96m**
1.52m
0.457mN/A1.63m2.44m
B
F
HI
A
PEDESTAL
DE
E
D E
C
CHASSIS
DUAL CARSINGLE CAR
PEDESTAL
B
G
F
HI
A
CE
E
B
F
HI
A
E
C
E E
15'-0" Dual Car 4.57m 15'-0" Dual Car 4.57m
TRA
NS
PO
RT
CA
R
5’-0” - 13'-0" max. 1.52m - 3.96m max.
G G
COUNTERWEIGHT
COUNTERWEIGHT
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
B
G
F
HI
A
C
CHASSIS
KTP-5 IN SERVICE DIMENSIONS SINGLE AND DUAL CAR**
ITEM DESCRIPTIONCHASSIS
ftA
B
CD
E
FGHI
Unit Length
Overall cribbing footprint width
Total base width from building face
Counter Weight
Transport Car Dimensions
Ramp to face of wallFront & Rear outrigger extended lengthDistance between outrigger jacksOverall cribbing footprint length
20'-0" Single Car
16'-3/4" max.
18'-3"
5’-0”5’-0” - 13'-0" max.
18"4’-4”14’-11”20’-11”
m6.09m
4.90m
5.486m
1.52m1.52m - 3.96m max.
0.457m1.32m4.55m6.38m
20'-0" Single Car
6’-0”
13'-0"**
5’-0”
18"N/A5’-4”8’-0”
ft
KTP-5 in Service DimensionsSingle Car and Dual Car
DIMENSIONPEDESTAL
m6.09m
1.83m
3.96m**
1.52m
0.457mN/A1.63m2.44m
B
F
HI
A
PEDESTAL
DE
E
D E
C
CHASSIS
DUAL CARSINGLE CAR
PEDESTAL
B
G
F
HI
A
CE
E
B
F
HI
A
E
C
E E
15'-0" Dual Car 4.57m 15'-0" Dual Car 4.57m
TRA
NS
PO
RT
CA
R
5’-0” - 13'-0" max. 1.52m - 3.96m max.
G G
COUNTERWEIGHT
COUNTERWEIGHT
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
TRA
NS
PO
RT
CA
R
KTP-5 IN SERVICE DIMENSIONS SINGLE AND DUAL CAR**
ITEM DESCRIPTION DIMENSIONCHASSIS PEDESTAL
ft m ft m
A Unit Length 20'-0" Single Car 15'-0" Dual Car
6.09m4.57m
20'-0" Single Car 15'-0" Dual Car
6.09m4.57m
B Overall Cribbing Footprint Width 16'0” 4.90m 6'-0'' 1.83mC Total Base Width From Building Face 18'-3" 5.486m 13'-0"** 3.96m**D Counter Weight Deck Width 5'-0'' 1.52m 5'-0'' 1.52m
E Transport Car Dimensions 5’-0'' - 13'-0" max. 1.52m - 3.96m max. 5'-0''- 13'-0" max. 1.52m - 3.96m max.
F Ramp To Face Of Wall 1'-6'' 0.457-0.864mm 1'-6'' 0.457-0.864m
G Front & Rear Outrigger Extended Length 4'-4'' 1.32m N/A N/A
H Distance Between Outrigger Jacks 14'-11'' 4.55m 5'-4'' 1.63mI Overall Cribbing Footprint Length 20'-11'' 6.38m 8'-0'' 2.44m