15 cdrw catalog prezentare 2018 - costheva.com · 8 for 2019 we are extending our products range...

CALITATE

REZISTENTA

GARANTIE

COSTHEVA SRL

CHIMICALE

VOPSELURI

1

COSTHEVA SRL

After working many years for a chemical

multinational company, Mr. Kostas Koutsoubas decided

that he needs new challenges in his professional career

and, in 1992, founded COSTHEVA SRL in Constanta City,

Romania.

Using his experience and technical knowledge, Mr.

Koutsoubas, acting as CEO of his company, has been

producing for the last 25 years a wide range of chemicals

for cleaning and maintenance, paints and primes to the

highest standards of quality and environmental

protection.

Today COSTHEVA SRL products are used in chemical,

marine, oil/gas industries, factories, power-plants,

construction sites, civil or industrial buildings. For a wide

range of materials, surfaces and various buildings,

COSTHEVA SRL offers solutions that improve appearance,

protection, durability, security and energy efficiency.

Also our cleaning products protect and increase the life,

efficiency and sustainability of equipment and

installations.

COSTHEVA's reputation as a chemical company is

insured by employees professionalism and the quality of

products compliant with Quality Management System ISO

9001: 2015 and ISO 14001:2015. As a result, our quality

products and fast delivery provides efficient and reliable

results for correct prices and flexible payment methods,

thereby making COSTHEVA SRL your global partner for

successful shipping, freight, construction or energy

business.

Since its foundation, our main customers have been

shipping companies and shipyard from the Romanian

Black Sea, and oil companies involved in exploration and

3

PRODUCTS SELECTION

GUIDE

8

FOR 2019 WE ARE EXTENDING OUR PRODUCTS RANGE WITH THE FOLLOWING ITEMS:

ź COAGULAND LIQUID (FOR BOILERS)ź ANTIFREEZEź BAUXITE REMOVERź BLEACH LIQUIDź CARPET CLEANERź FOULING AND STAIN REMOVERź HARD SURFACE CLEANERź NICKEL ORE CLEANERź TAR AND COAL REMOVERź ULTRASONIC BIOLOGICAL CLEANERź STEEL CLEANSING PASTE

9

Chemicals

12

BOILER WATER

TREATMENT

13

DESCRIPTION

BWT is a liquid compound. It contains

a combination of alkaline mineral

salts, sequestering agents, sludge

conditioners, scale and corrosion

inhibitors.

APPLICATIONS

BWT is suitable for use with all

auxiliary boilers including waste heat,

and exhaust gas boilers. BWT prevents

scale formation and inhibits

corrosion. It also conditions sludge so

it can be removed by blow-down.

DIRECTIONS FOR USE

For optimum results, BWT should be

dosed directly into the boiler via a

by-pass pot feeder installed in the

boiler feed line. For low-pressure

boilers without by-pass feeder, the

product may be dosed into the hot

well. Regular blow-down is necessary

to remove sludge and solids.

INITIAL DOSAGE

Initial dose for untreated system is 1

lt. of BWT per 1000 lt. water.

Maintenance dosages are determined

by the result of P-alkalinity. Analysis

is carried out using a BWT test set.

NOTE: The phosphate and alkalinity

values if analyzed, may not necessarily

correspond to the control levels. In cases of

poor quality feed water used, increased

dosages may be required. If the P alkalinity

is persistently low, use ALKAL CONTROLLER to

adjust. The pH of the boiler water should be

kept between 10 - 12.

DOSAGE CHART

50100150

200225250300

350

400

P-Alkalinity(PPM CaCO3) DoseAction

BWT (lt. per ton)

1.00.60.30

0

000

0

0

IncreaseIncreaseIncreaseSatisfactory

Blow-down

Blow-downBlow-downBlow-down

Blow-down

Blow-down

0

This information is not to be

taken as a warranty or

representation for which we

assume legal responsibility, nor

as permission, inducement or

recommendation to practice any

patented invention without a

licence. The information is

offered solely for your

consideration, investigation and

verification.

B.W.T.

Combined

boiler water

conditioner

ź One-product

treatment for

LP auxiliary

boilers

ź P r e v e n t s

corrosion and

s c a l e

formation

ź C o n d i t i o n s

sludge for easy

removal by

ź blow-down

ź Easy to use

PRODUCT CHARACTERISTICS

A p p e a r a n c e :

c l e a r

liquid

S p e c i c

gravity: 1 , 2

(20°C)

F l a s h

point: none

IMO Class: 8 / II

U N

Number: 1824

ADR: 8.42b)

14

DESCRIPTION

ALKAL CONTROLLER is a concentrated liquid

alkaline compound. It is used in conjunction

with PHOSPHATE for the prevention of scale

and corrosion in low and high-pressure

boiler systems.

APPLICATIONS

ALKAL CONTROLLER is added to the boiler

water to maintain a optimum alkalinity

level to prevent corrosion. Under these

conditions, calcium and magnesium

hardness salts cannot form and the

precipitate can be removed by blow-down.

DIRECTIONS FOR USE

For optimum results, ALKAL CONTROLLER

should be dosed directly into the boiler via

a by-pass pot feeder installed in the boiler

feed line. For low pressure boilers without

by-pass feeder, the product may be dosed

into the hot well.

INITIAL DOSAGE

Initial dosage for untreated water is 250 ml

of ALKAL CONTROLLER per ton of water.

Dosages should be adjusted in accordance to

the recommended P alkalinity levels. The

recommended control limits are:

CONTROL LIMITS

P Alkalinity : 75 - 100 PPM for boilers 28 -

57 bar

100 - 150 PPM for boilers max. 28

bar

- For high pressure boilers P Alkalinity level

must be between 0 - 50 PPM.

- 0.25 ml ALKAL CONTROLLER will increase

the P alkalinity by 70 PPM

NATURE OF SPECIAL RISKS AND SAFETY

ADVICE

In accordance with the latest EEC Council











verification.

ALKAL CONTROLLER

Boiler water

conditioner

źM a i n t a i n s

a l k a l i n i t y

w i t h i n

o p t i m u m

limits

ź A s s i s t s i n

precipitation

of hardness

salts

ź N e u t r a l i z e s

acid condition

in boiler water



clear liquid

C o r r o s i v e

a c t i o n :

corrosive

t o

a luminu

m, zinc

and tin

Specic gravity: 1,2

(20°C)

F l a s h p o i n t :

none

15

DESCRIPTION

PHOSPHATE is a dry phosphates based

powder. It is used in conjunction with ALKAL

CONTROLLER for the prevention of scale and

corrosion in low and high-pressure boiler

systems.

APPLICATIONS

PHOSPHATE is added to the boiler water to

maintain an optimum phosphate level.

Under these conditions, calcium and

magnesium hardness salts cannot form and

the precipitate can be removed by blow-

down.

DIRECTIONS FOR USE

PHOSPHATE should be dissolved in warm

water before adding into the boiler. The

solubility of the product is 100 gr. per lt.

For optimum results, the product should be

dosed directly into the boiler via a by-pass

pot feeder installed in the boiler feed line.

For low-pressure boilers without by-pass

feeder, the product may be dosed into the

hot well.

INITIAL DOSAGE

Initial dosage for untreated water is 100 gr.

of PHOSPHATE per ton of water. Dosages

should be adjusted in accordance to the

recommended phosphate levels. The

recommended control limits are:

CONTROL LIMITS

Hardness : Zero

Phosphate : 10 - 20 PPM (HP boiler)

20 - 40 PPM (LP boiler)


ADVICE


directives this product is subjected to:

S2 : Keep out of reach of children

S24/25 : Avoid contact with skin

and eyes

S26 : In case of contact with

eyes, rinse immediately with plenty of

water and seek medical advice

S28 : After contact with skin,

wash immediately with plenty of water











verification.

PHOSPHATE

Boiler water

conditioner

ź R e d u c e s

ha rdne s s i n

boiler water

ź P r e v e n t s

formation of

ca lc ium and

magnesium scale

ź C o n v e r t s

hardness salts to

non-adheren t

sludge that can

be removed by

blow-down



white powder

Corrosive action:

none

pH 1% solution:

8,8


none

I M O C l a s s :

not regulated

U N N u m b e r :

not regulated

ADR: n o t

regulated

16

DESCRIPTION

OXYGEN CONTROL is used as a oxygen

scavenger in boiler water treatment,

reacting with oxygen to form inert

sodium sulfate. The catalyst ensured

rapid reaction times, so that

complete oxygen removal is achieved.

Rapid oxygen removal means minimal

corrosion and extended boiler life..

OXYGEN CONTROL may also be used for

the removal of chlorine: 4 ml. of

OXYGEN CONTROL removes 1 gr. of free

chlorine.

PRODUCT DOSAGE AND CONTROL

OXYGEN CONTROL is a slightly acid

liquid and thus must NOT be mixed

with any alkaline treatment, when

dosing the feed system. Mixing with

alkaline treatments will cause

precipitation of the catalyst.

OXYGEN CONTROL can be fed neat or

diluted with water. Dilution should

not exceed 30 times and must be

used immediately. Application by

dosing pump into the feed system is

ideal, but adding by dosing pot or

alternative means to the feed system

or direct to the boiler is acceptable.

Adding at deaereator outlet on feed

pump suction, to give optimal

protection to as much of the system

as possible is recommended.

OXYGEN CONTROL should be dosed at a

rate of 90 ml. / ton if liquid, at 45 gr.

/ ton if powder. This is the dosage

required to maintain the desired 20 -

30 mg. / lt. of sodium bisulfite in the

boiler. Note: Where boilers are left

idle for any length of time, a reserve

of 100 - 200 PPM (mg. / lt.) sodium

sulfite should be maintained in water

to protect against corrosion. The

single-tube low-pressure boilers

(i.e.: quick vaporization boilers











verification.

OXYGENCONTROL

A catalyzed sodium

bisulfite in powder

or liquid form.

Very soluble in

water.

ź Efficiently and

quickly removes

the dissolved

Oxygen from the

b o i l e r ’ s

feedwater.

ź Prevents oxygen

corrosion

ź It is safer in use

than Hydrazine

based products.

ź It is stable in

high pressures

and that makes

it applicable in

any type of

marine boilers.


Powder


white powder

Density 0,80

pH 5% solution: 7

5,5


none

17

DESCRIPTION

BOILER SLUDGE is a synthetic organic

polymer of high molecular weight in a

viscous aqueous solution. It has an added

anti-foam agent and can be diluted with

water to any required concentrations.

APPLICATIONS

BOILER SLUDGE is used to prevent formation

of adherent deposits and sticky sludge in

boilers. The deposits and sludge are then

removed by normal blow-down.

BOILER SLUDGE can also be used in the

event of an oil contamination. The oil will be

coagulated for removal by blow-down.

However, if the oil contamination is

excessive and continuous, the source of

contamination must be stopped immediately

and off-line cleaning is necessary to restore

normal operation of the boiler.

DIRECTIONS FOR USE

For optimum results, BOILER SLUDGE should

be dosed directly into the boiler via a by-

pass pot feeder installed in the boiler feed

line. Otherwise it can be dosed into the hot

well. An initial dose of 250 ml / ton of boiler

water is recommended. For maintenance

dose, this quantity can be reduced or

increased.


ADVICE


directives this product is subjected to:


S24/25 : Avoid contact with skin and eyes

S26 : In case of contact with eyes, rinse

immediately with plenty of water and

seek medical advice

S28 : After contact with skin, wash

immediately with plenty of water and

seek medical advice











verification.

BOILER SLUDGE

CONDITIONER

Oil and sludge

conditioner

ź Coagulates oil

in the boiler

w a t e r f o r

removal by

blow-down

ź Fluidizes and

d i s p e r s e s

sludge

ź P r e v e n t s

deposits from

adhering to

boiler surfaces



s l i g h t l y

brown or

c l e a r

liquid

Specic gravity:

1,0

(20°C)


none

I M O C l a s s :

18

COOLING WATER

TREATMENT

19

APPLICATIONS

D.C.W.T. is a nitrite, borate and

organics based corrosion inhibitor

suitable for all types of engines and

other closed re-circulating water

systems.

DIRECTIONS FOR USE

Determine the quantity of treatment

required for the system from the

product dosage chart. Sacrificial

anodes (magnesium or zinc) and

galvanized coating contained inside

the cooling water system must be

removed prior to D.C.W.T. treatment.

These materials are unnecessary in

the treated system. It can cause

undesirable deposits if not removed.

D.C.W.T. should be added to the

system at a point where the

circulation is high. Do not add to

expansion tank if there is little or no

circulation. Systems contaminated

with oil and/or scale should be

cleaned before applying D.C.W.T.

treatment. Use SEA CLEAN for

degreasing and DESCAL LIQUID for

descaling operation.

DOSAGE AND CONTROL

The effective control range of is 1500

- 2000 PPM NO2. To maintain

adequate reserves, nitrite level should

not be allowed to fall below 1500 PPM.

Initial dosage is 6 lt. of for every ton

of cooling water. Maintenance dosages

are based on the nitrite

concentration

shown in the product dosage chart.This information is not to be










verification.

D.C.W.T.NON

CHROMATE

Corrosion and

scale inhibitor

for

closed circuit

cooling water

systems

ź H i g h l y

e f f e c t i v e

a n o d i c

i n h i b i t o r

t r e a t m e n t ,

p r o t e c t s

ferrous and

non-ferrous

metals

ź Deposits a

m i c r o s c op i c

protective film

on surfaces

ź Built-in pH

b u f f e r i n g

compounds

ź C o n t r o l s

formation of

hard scale

deposits

ź W i l l n o t

damage seals,

g l a n d s ,

DOSAGE CHART

Nitrite (PPM NO2) D.C.W.T. (lt. per ton)

Initial dose 6.0

200 5.2

400 4.4

600 3.6

800 2.8

1000 2.0

1200 1.2

1500 - 2000 Satisfactory

20











verification.

APPLICATIONS

DIESEL COOLING WATER TREATMENT

POWDER is a solid mixture of specific

corrosion and scale inhibitors, applied

for the prevention of corrosion and

scale to all marine diesel engines for

the treatment of the cooling water. It

is the equivalent powder product of

D.C.W.T. NON CHROMATE .

Furthermore, it can be applied to

other cooling and heating closed

re–circulating water

systems in order to prevent rust and

scale development.

The application of adjusts the pH

value in a range where the desired

protection of the metallic surfaces is

achieved. Treatment of the cooling

water with , in relation to the

quantity involved is highly effective,

offering a decisive cost advantage.

A. Dosing procedure Initially, a

quantity of 3kgrs per ton of distilled

or fresh water must be used.

For optimum results, a nitrite

concentration of 1,200–3,600ppm in

the cooling system is recom mended.

The following dosage rates (as

appearing in Table 1) should be

applied anytime the Nitrite

concentration is not within the

satisfactory levels.

B. Feeding Procedure

After the quantity of D.C.W.T.

POWDER to be dosed is determined

and before the introduction of the

product into the system, it must be

dissolved in sufficient volume of

water until the dissolution of the

powder is complete.

Thereafter, feed the solution into the

expansion tank or through a

metering pump, these are

D.C.W.T. POWDER

D.C.W.T. POWDER is

a non-Chromate,

Nitrite-based

powder compound

with a deposit

m o d i f i e r , p H

stabilized.

ź P r e v e n t s

corrosion and

scale formation.

ź Prevents acid

attack.

ź A chromate–free

product.

ź It is not an oil

compound and

does not create

foaming.

ź Protects various

metal surfaces

a n d i s

compatible with

non–metals.

ź Increases the

e n g i n e ’ s

efficiency.

ź Prevents scale

overheating and

m a i n t a i n s

regular heat

transfer.

ź Has no effect on

r u b b e r a n d

p l a s t i c

c o m p o u n d s ,

21

APPLICATIONS

EVAPOR IMPROVER is used in both high

and low pressure evaporators to

prevent foaming, carry-over and

scale formation.

DIRECTIONS FOR USE

should be diluted in fresh water and

fed continuously to the evaporator

feed water line or directly into the

evaporator she l l us ing a

recommended dosing system

consisting of dosing tank with

lowmeter and suitable eductor or a

metering pump system. A dosage rate

of 25 ml per ton of distillate is

recommended. E.g. For a 40 ton per

day evaporator, 1ltr of should be used

daily. Solution strength and fed rates

should be calculated to give the

required dosage through continuous

feeding.

NOTES

1. Brine density should not exceed

1.5/32 (specific gravity: 1.038).

Scale formation increases rapidly at

higher brine densities.

2. Prior to starting treatment it is

recommended to remove any

existing scale in the evaporator.

DESCAL LIQUID or DESCAL POWDER is

recommended for this purpose.


ADVICE

In accordance with the latest EEC

Council directives this product is not

subjected to any recommendation.

R38 : Irritating to the skin


S26 : In case of contact with eyes,

rinse immediately with plenty of












verification.

EVAPOR IMPROVER

Liquid compound

c o n t a i n i n g

s y n t h e t i c

p o l y m e r s ,

sequesteringand

a n t i - f o a m i n g

a g e n t s f o r

prevention of scale

in evaporators

ź Safe to use with

e v a p o r a t o r s

where distillate

is used for

d r i n k i n g

purposes

ź M a i n t a i n s

o p t i m u m

e v a p o r a t o r

performance

ź Prevents scale

formation and

avoids the need

f o r a c i d

descaling

ź Reduces foaming

and carry-over

into the distillate

ź Does not contain

phosphates

ź Not detrimental

to d is t i l l a te

purity

22

SEA WATER

TREATMENT

23

APPLICATIONSBIOGUARD gives complete protection against corrosion and fouling by marine growth such as algae, moss, shellfish and microorganisms in seawater cooling systems. It is also used as an effective biocide to treat diesel engine cooling water systems against microorganisms and bacteria.

DIRECTIONS FOR USEIt is essential that systems are completely free from marine growth before treatment with BIOGUARD. Therefore where necessary, clean the systems with DESCAL LIQUID .

SEAWATER COOLING SYSTEMSBIOGUARD should be injected into the sea chests with a dosing equipment, once every two days for one hour, according to the flow rate of seawater in each particular system. When vessel is in harbor, or in prolific zones of shellfish, the frequency of treatment should be increased to once every other day. 3 PPM of BIOGUARD is sufficient to prevent fouling. To achieve this dose rate 0.3 lt. of product is required for every 100 ton per hr. of seawater flowing through the system.

FRESH WATER COOLING WATERBIOGUARD is also a recommended biocide to be used in conjunction with D.C.W.T. NON-CHROMATE in case of contamination of microorganisms in the fresh water cooling system. It is effective over a broad pH range and gives a wider spectrum of protection against micro-organisms in marine diesel engine cooling system. In this case, 100 PPM of BIOGUARD or 1Ltr for 10 tons of water, added on a weekly

BIOGUARD

Anti-foulant and corrosion inhibitor

for sea water cooling systems

ź Prevents marine growth in filter boxes, sea water lines and heat exchangers

ź F i l m i n g p r o p e r t i e s protect systems a g a i n s t corrosion

ź E n s u r e s m a x i m u m t h e r m a l efficiency by keeping heat transfer surfaces f r e e f r o m deposits

ź Consistent usage provides long l a s t i n g protection

ź R e d u c e s maintenance and down time

ź Non-toxic and non-po l lutant product


A p p e a r a n c e : c l e a r g o l d











verification.

25

FUEL OIL

TREATMENT

26











verification.

APPLICATIONS

FUEL OIL IMPROVER acts as a

combustion improver, carbon

catalyst, ash modifier and smoke

suppressant for diesel engines

burning heavy fuel oils and boilers.

PRODUCT DOSAGE

Dosage point location varies

depending on engine/boiler fuel

system layout. The most efficient and

economical method is obtained with a

metering pump, dosing the additive

into the suction side of the booster

pump (for diesel engines) or into the

burner feed line (for boilers).

Alternatively the additive may be

dosed directly to the day tank prior

to refilling or directly the additive

may be dosed directly to the bankers

tanks.

Dosage rates depend on engine

characteristics, operating conditions

and quality of fuel oil.

A CCAI (Calculated Carbon Aromaticity

Index) number exceeding 840

indicates a poor fuel quality, which

justifies the use of a chemical fuel oil

treatment to counteract the effects

hereof. Typical dosage rate varies

between 1 to 2 lt. for every 2000 lt. of

fuel oil may be necessary.

As a general guide, initial dosage

recommendation is 1ltr of FUEL OIL

IMPROVER for 4000 lt. of heavy fuel

oil.

FUEL OIL IMPROVER

Blend of highly

c o n c e n t r a t e d

c o m b u s t i o n

c a t a l y s t s

containing organo

metallic complex

agents and special

solvents

ź I n c r e a s e s

c o m b u s t i o n

efficiency

ź Reduces carbon

bu i l d-up i n

c o m b u s t i o n

zones

ź I n h i b i t s

formation of

c a r b on a c e o u s

ash deposits

ź Minimizes low

t e m p e r a t u r e

corrosion by

i n h i b i t i n g

conversion of

sulfur dioxide to

sulfur trioxide

ź Reduces piston

ring groove and

piston fouling

resu l t ing in

longer life

ź Reduces ash

d e p o s i t

formation in

turbochargers

27











verification.

DESCRIPTION

VANASOLVENT is a liquid compound

that contains chemicals proven

effective in reducing harmful effects

of vanadium oxides and sodium salts

in diesel engines. Adding

VANASOLVENT to bunker fuel forms a

complex that de-activates the

vanadium and sodium common in

heavy bunker fuels. The melting point

of vanadium pentoxide is 675°C and

sodium sulfate is 880°C. When

VANASOLVENT is employed, the

complexes formed with vanadium and

sodium sulfate by the agents in

VANASOLVENT melt at about 1100°C.

APPLICATIONS

VANASOLVENT is used both in steam

and motor vessels burning heavy fuel

oils to improve combustion efficiency,

reduce corrosion, disperse sludge and

separate water. It is primarily

formulated for use in diesel engines

to prevent valves failure.

DIRECTIONS FOR USE

VANASOLVENT is introduced manually

into the fuel tanks prior or during

bunkering. The fuel movement on

entering the tank will blend the

product completely with the fuel. The

product can also be dosed

automatically into the fuel oil service

line, prior to the service pump by

means of a metering pump.

PRODUCT DOSAGE

Dosage requirements depend on the

nature and amount of impurities, but

typical dosage rate is 1 lt. of

VANASOLVENT per 4 tons of fuel oil,

considering a normal vanadium of 100

PPM. To establish a more accurate

and cost efficient dosage rate, it

VANASOLVENT

Highly effective

ash modifier and

high temperature

corrosion inhibitor

for diesel engines

and boilers

ź Reduces high


corrosion

ź R e d u c e s

corrosion effects

c a u s e d b y

vanadium and

s o d i u m

impurities

ź Reduces fouling

i n p o s t

combustion zone

such as turbo

charges, exhaust

v a l v e s ,

economizers

ź S e p a r a t e s

emulsified water

in fuel and

enhance water

separation at the

separator

ź R e d u c e s

u n b u r n e d

particles and

soot emission

ź Extends life of

valves, cylinders

etc.

28











verification.

DESCRIPTION:

BENEFITS:

Saves you cleaning time by reducing

soot and slag deposit. Reduces cold

end corrosion by neutralizing sulfuric

acid deposits on surfaces where the

temperature is lower than the dew

point of the exhaust gas. Saves you

money by improving heat transfer

and boiler efficiency due to reduction

in deposits. Helps to keep exhaust gas

system clean while slow steaming and

will also reduce cold end corrosion. If

firescale is allowed to form on heat

exchangers, the loss of efficiency can

be directly related to extra fuel

consumption. A 1 mm deposit is

approximately equivalent to a 10%

efficiency loss, a 3 mm deposit can

reduce efficiency by up to 50%.

SOOT CLEANER

Soot Cleaner is formulated for

effective prevention of soot and

firescale deposits from boilers and

diesel engine exhaust systems. For

the prevention of soot and firescale

deposits in diesel engine and boiler

exhaust systems. For reduction of

cold-end corrosion where surface

temperatures are lower than the dew

point of the exhaust gases. Aids soot

blowing The normal ignition

temperature of soot is around 600°C.

This means that it is burned only in

the hottest parts of the boiler or

diesel exhaust systems. Due to the

catalytic action of SOOT CLEANER, the

ignition temperature of the

soot/firescale is reduced down to

200°C. The carbon deposits are thus

ignited, leaving an easily removable

ash.

The use of SOOT CLEANER not only

provides greater fuel efficiency, but

SOOT CLEANER

Highly effective

ash modifier and

high temperature

corrosion inhibitor

for diesel engines

and boilers

ź Reduces high


corrosion

ź R e d u c e s

corrosion effects

c a u s e d b y

vanadium and

s o d i u m

impurities

ź Reduces fouling

i n p o s t

combustion zone

such as turbo

charges, exhaust

v a l v e s ,

economizers

ź S e p a r a t e s

emulsified water

in fuel and

enhance water

separation at the

separator

ź R e d u c e s

u n b u r n e d

particles and

soot emission

ź Extends life of

valves, cylinders

etc.

29

TANK

CLEANERS

30











verification.

ALKACLEAN HD (POTASSIUM BASED) is

used for removal of vegetable and

animal oil residues in cargo tanks. It is

also used as a final treatment for

cleaning tanks from black to white or

grain. ALKACLEAN HD is suitable for use

on ferrous metals, including stainless

steel and epoxy tank coatings.

ALKACLEAN HD is used for cleaning boiler

furnace and as a neutralizing agent.

DIRECTIONS FOR USE

TANK CLEANING

Tank cleaning should, if possible, be

carried out immediately after discharge

of cargo. ALKACLEAN HD should be

applied with water at a temperature

above 60°C if possible. The cleaning

should be done by circulation using tank

cleaning machine, spray equipment or

injected into the steam.

QUICK DRYING OILS

Use a 3% to 5% solution of ALKACLEAN HD

with fresh water.

SEMI-DRYING OILS

Use a 5% solution of ALKACLEAN HD with

fresh water.NOTE: fresh water solutions are recommended. If

seawater solution is used, it is recommended that

dosage amount be increased by 1.5 times the amount

required for fresh water solutions.

BOILER FURNACE CLEANING

Use a 10% to 20% solution of ALKACLEAN

HD with fresh water. A hot solution of

more than 40°C is preferable as

treatment is more effective when

heated. Apply solution to surfaces to be

cleaned by spraying. Depending on the

nature, age and state of the deposits,

repeat spraying as necessary. For

deposits, which are very hard to remove

a solution of up to 50% can be used.

CLEANING OIL CONTAMINATION IN BOILERS

AND HEAT EXCHANGERS WATER SIDE

Generally the amount of ALKACLEAN HD

required is 4% of the unit capacity

depending on the degree of

contamination. The above dosage may be

increased to 5-10%.

PROCEDURE

ALKACLEAN HD

(POTASSIUM

BASED)

H e a v y d u t y

alkaline cleaner

ź R e m o v e s

h a r d e n e d

oxidized oil and

grease deposits

ź Cleaning of boiler

furnace

ź R e m o v e s

vegetable, fish

and animal oils

ź Final treatment

for c leaning

cargo tanks from

black to white or

grain

ź Safe on epoxy

and polyurethane

tank coatings



clear amber liquid

Corrosive action:

a v o i d

contact with

aluminum, zinc,

tin and their

alloys

Specific gravity:

1,3 (20°C)

31











verification.

APPLICATIONS

TANK CARE is used for cleaning and gas-

freeing of cargo tanks contaminated with

petroleum residues, double bottom

tanks, deep tanks and bilges. Can be

used neat or diluted with water. Can be

used with most tank coatings. Cleaning

methods: with machines, manual

spraying, rock and roll, re-circulation.

DIRECTIONS FOR USE

CLEANING AND GAS FREEING OF DOUBLE

BOTTOM AND DEEP TANKS AT SEA - ROCK

AND ROLL METHOD

1. Strip tank of all possible fuel. Where

possible, heat fuel to assist removal, and

trim vessel to give maximum stripping

suction.

2. Flush tank with seawater, while

heating, stripping constantly. Ensure all

other valves to and from the tank are

closed.

3. After flushing add first dosage of TANK

CARE to tank. Use 10 to 20 lt. of TANK

CARE per 1000 lt. tank capacity. Fill tank

to 25% capacity with seawater and apply

heating where possible (up to 60°C

maximum). Maintain for 24 hours.

4. Fill tank to 95% capacity with

seawater. Apply heating to 60°C

maximum, if available, and maintain for

48 to 72 hours. If the sea is calm fill up

the tanks enough for the solution to be

in contact with the overheads.

5. Discharge and strip tank. Fill 50%

capacity with seawater. Maintain for 2

hours to allow rinsing.

6. Discharge tank and strip. Flush tank

with seawater for 2 hours, stripping

constantly.

7. Add second dosage of TANK CARE to

tank (10 to 15 lt. per 1000 lt. tank

capacity). Fill tank with seawater to 90-

95% capacity and apply heating to 60°C

maximum, where available. Maintain for

48 to 72 hours.

8. To gas free, fill tank with seawater

through the sounding or vent pipe, and

press up tank in order to overflow.

Discharge and strip completely by

TANK CARE

Fast and effective

t a n k c l e a n e r

c o n t a i n i n g

p e t r o l e u m

s o l v e n t s ,

e m u l s i f y i n g

detergents and

su r f a c e-a c t i v e

agents.

ź High solvent

power, rapid

penetration

ź R a p i d l y

emulsifies in

fresh or salt

water

ź Rapid rinsing

leaving clean, oil

free surface.

ź C on c en t r a t e d

p r o d u c t ,

effective and

economical in

diluted solutions

ź Non-corrosive to

metal and paint

finishes

ź S im p l e a n d

e f f e c t i v e

cleaning of tanks

at sea

ź Low toxic i ty

when mixed with

sea or fresh

w a t e r a s

recommended.

32

RECIRCULATION METHOD

The chemical solution is prepared in a cargo tank near the pump

room. The strength of the solution depends on the quantity of

water required for circulation: 10 - 20 lt. per 1000 lt. of water.

Depending on the size and the condition of the tank to be cleaned,

the solution can be used only for three tanks after which a new

solution should be made. After cleaning rinse the tanks

thoroughly with seawater or fresh water, depending on availability

and requirements

HAND SPRAYING METHOD

UseTANKCAREundilutedonthebulkheads,frames,stringersetc.,usinga

spraygun.Afterpre-determined reaction time, rinse the tanks with

water, using automatic tank-cleaning machines.For spotcleaning

TANK CARE can be used by hand, using a hose for rinsing. When

applying these methods, the tanks must be gas-free before

entering the tanks.

NATURE OF SPECIAL RISKS AND SAFETY ADVICE

In accordance with the latest EEC Council directives this product

33











verification.

DESCRIPTION

SLUDGE RECONDITION is a synthetic

organic polymer of high molecular

weight in a viscous aqueous solution. It

has an added anti-foam agent and can

be diluted with water to any required

concentrations.

APPLICATIONS

SLUDGE RECONDITION is used to prevent

formation of adherent deposits and

sticky sludge in boilers. The deposits and

sludge are then removed by normal

blow-down.

SLUDGE RECONDITION can also be used in

the event of an oil contamination. The

oil will be coagulated for removal by

blow-down. However, if the oil

contamination is excessive and

continuous, the source of contamination

must be stopped immediately and off-

line cleaning is necessary to restore

normal operation of the boiler.

DIRECTIONS FOR USE

For optimum results, SLUDGE

RECONDITION should be dosed directly

into the boiler via a by-pass pot feeder

installed in the boiler feed line.

Otherwise it can be dosed into the hot

well. An initial dose of 250 ml / ton of

boiler water is recommended. For

maintenance dose, this quantity can be

reduced or increased.


ADVICE


Council directives this product is

subjected to:


S24/25 : Avoid contact with skin and

eyes


rinse immediately with plenty of



immediately with plenty of water

SLUDGE RECONDITION

Oil and sludge

conditioner

ź Coagulates oil in

the boiler water

for removal by

blow-down

ź Fluidizes and

disperses sludge

ź P r e v e n t s

deposits from

adhe r i n g t o

boiler surfaces



s l i g h t l y

brown or

c l e a r

liquid

Specic gravity:

1,0 (20°C)


none

IMO Class: n o t

regulated

U N N u m b e r :

not regulated

ADR: n o t

regulated

34

COATINGS

35











verification.

TANK COAT is a revolutionary bituminous

highly viscous product, engineered to

satisfy extremely demanding conditions.

It is formulated with specific wetting

agents, special ineert additive

compounds and advanced surface–active

agents that form together to create, an

adherent protective, homogeneous and

elastic elastic dense layer, that will

protect all metal surfaces and spaces

such as ballast tanks, bulk holds, dry

holds, decks, docks, etc, against

corrosion.

A. DOSING PROCEDURE

TANK COAT is applied in quantities

proportional to the surface area to be

covered, and should be diluted with

8–12% water.

Note that 1 liter of TANK COAT can cover an

area of approximately 2–3m2 at a layer

thickness of 220 microns. However, in cases

where the surface to be treated is new build

then the quantity to use is smaller than for

high pitting surfaces.

B. PREPARATION

TANK COAT must be applied to a clean,

dry surface, free of rust and any loose

particles.

Therefore the following steps must be

taken:

1. Initially, remove loose rust scales

and rust blisters either by a

high–pressure water supply and/or by

water/sand blasting, for heavy

accumulation mulation, use a

high–pressure machine.

2. Apply under pressure, a RUST SHIELD

solutiontion with water at a ratio of

1:2, by use of spraying equipment.

3. Leave solution to act for 15 minutes

and then wash thoroughly with a high

pressure water source.

4. Let surface dry completely before

applying the TANK COAT. To assist

with quicker drying, use a hot air fan.

C. APLICATION PROCEDURE

TANK COAT

ź Once applied it

protects and

keeps the coated

surface free

from corrosion.

ź Enriched with

f i n e r u b b e r

powder and is

1 0 0 %

water–soluble.

ź Can safely be

used on all metal

surfaces and

metal alloys.

ź No nega t i v e

effects on rubber

o r p l a s t i c

compounds.

ź Forms a flexible,

elastic and long

lasting coating

with insulating

properties

ź Harmless to

m a c r o a n d

microorganisms.

ź Provides quick

and re l iab le

results, whilst

b e i n g v e r y

stable.

ź Cost effective,

simple to apply

and use.


36











verification.

DESCRIPTION

Coat Barrier is a water based liquid

product specially formulated to leave

a thin, temporary film on cargo hold

surfaces. The film provides a barrier

between the cargo and the cargo hold

surfaces making the cleaning

operation after unloading quicker and

easier, and optimal cleaning result is

achieved. is safe to the environment

and to the personnel handling it, and

will not contaminant the cargo. It is

non-corrosive and safe on all

coatings.

APPLICATIONS

After drying, creates a thin, non-

sticky film on the cargo hold

surfaces. The film substantially

facilitates the cleaning before next

cargo in two ways:

1. The film fills the minute pores in

the surface, and prevents that small

particles are trapped in the pores.

2. Small, solid particles can be very

difficult to remove especially from

organic coatings, even with the use of

effective cleaning agents and high

pressure water jets. The reason is the

build-up of electromagnetic forces,

and sometimes the only way to

remove the particles is by scrubbing.

Coat Barrier provides a barrier

between the particles and the surface

that minimize this problem, and the

particles may now be removed with

high pressure water only. The film is

completely water soluble and is easy

to remove even with cold sea water.

To avoid re-deposition of

contaminants a cleaning agent should

be used, but at lower dosage rates

than what normally is required. Coat

Barrier may also be sprayed on deck,

superstructure and other areas

COAT BARRIER

Water Based liquid

special ly for-

mulated to leave a

thin temporary

film on cargo hold

surfaces


C o l o u r :

Colourless

Density: 1,00 -

1,01 g/cm3 at

20°C

pH: 9 at

1 0 0 %

concentration

Solubility in water:

100%

37

ECO

PRODUCTS

BIODEGRADABLE

AND WATER BASED

PRODUCTS

38











verification.

Water based and solvent free,

biodegradable and safe for marine life.

APPLICATIONS

O.S.D. is used to disperse and clear

accidental oil spills on deck and in the

sea.

DIRECTIONS FOR USE

OIL SPILL ON WATER

Where possible contain any floating

spilled oil, using oil booms. If the oil

layer is too thick, pump or skim off as

much as possible. When most of the

spilled oil has been removed or the

spilled oil cannot be contained, apply

O.S.D. undiluted. For small spills, spray

O.S.D. using a portable hand spray. Allow

the product to react with the oil, then

disperse the mixture using water from

fire hose or other mechanical means.

For large spills, use spraying equipment

connected to the side of a motor boat.

Ensuring the spray is directed over the

spill. Spraying can also be done from

aircraft fitted with spraying equipment.

OIL SPILL ON DECKS AND BEACHES

Remove as much spilled oil as possible

with an oil absorbent. Spray undiluted

O.S.D. over the spill and allow the

product to react with the oil. Disperse

the mixture with water from a fire hose.

For spills on beaches and on rocks the

mixture will be dispersed by natural

tidal wash action.

PRODUCT DOSAGE

The quantity of O.S.D. used largely

depends upon the type and quantity of

oil.

Crude oil - thin layer: 1 volume O.S.D. to

10 volumes of oil

Heavy hydrocarbon oil - thick oil: 1

volume O.S.D. to 4 volumes of oil

NATURE OF SPECIAL RISK AND SAFETY

DATA

OIL SPILL DISPERSANT

ECO

Low toxicity biodegradableoil spill dispersantź Type I ready to use

productź Biodegradable and very

low toxicity to marine lifeź R a p i d l y c o n v e r t s

hydrocarbons into very f i n e e m u l s i o n s a c c e l e r a t i n g t h e breakdown of the oil by marine bacteria



light yellow,

ambe r o r

d a r k

brown liquid

Specic gravity:

0,95 (20°C)


>90°C

IMO Class: n o t

regulated

U N N u m b e r :

not regulated

ADR: n o t

regulated

39











verification.

Water based and solvent free, biodegradable and safe for animal and vegetal life.

APPLICATIONS

DEGREASER ECO is a general oil and grease remover for deck and engine room. Most suitable for removal of oil and grease from machinery parts, tank tops, bulkheads, decks and floor plates. is also used for cleaning of cargo tanks, bunker tanks and for spot cleaning.

DIRECTIONS FOR USE

DEGREASER ECO is applied by soaking, spraying or combined with scrubbing.

SOAKING

Dip parts to be cleaned into bath of undiluted DEGREASER ECO. Allow deposit to breaks up and loosen. Then rinse off with water (chemical cleaning module can be utilized for this application, allowing re-circulation of the product). A higher temperature of the solution (up to 60°C) always increases the cleaning power of the product.

SPRAYING / CLEANING OF TANKS

Apply neat and allow product to penetrate into deposits for 15 to 20 minutes before rinsing off with water. For stubborn deposits some brushing may be necessary to accelerate removal. Before spraying a prewash with hot water of approx. 60°C is always helpful.

For tanks: before cleaning with DEGREASER ECO prewash with hot water of approx. 60ºC, except for drying and semidrying oils. Then spray with undiluted and let the product soak for at least 30 minutes. Rinse each tank for approx. 45 minutes with hot water at 60ºC.

SCRUBBING

Use DEGREASER ECO undiluted, agitate by scrubbing where soiling is not recent, is thick and/or trodden in. Rinse off with water.

CLEANING OF COOLING SYSTEMS

Fill the cooling system with an emulsion of DEGREASER ECO and water, Depending on the degree of contamination, 100 lt. of cleaning

DEGREASER ECO

General purpose

emulsifier cleaner

ź Highly effective

so lvent with

rapid penetration

ź Loosens and

b r e a k s u p

deposits quickly

ź S t r o n g


action

ź Easily rinsed

leaving surfaces

free of oil and

grease

ź Quick and easy

to use - saves

labor costs

ź Non-corrosive,

l ow t ox i c i t y

product


Appearance: l i g h t

yellow, amber

o r d a r k

brown liquid

Specic gravity:

0,85 - 0,9

(20°C)


40











verification.

Water based and solvent free, biodegradable and safe for marin life.

APPLICATIONSTANK CARE is used for cleaning and gas-freeing of cargo tanks contaminated with petroleum residues, double bottom tanks, deep tanks and bilges. Can be used neat or diluted with water. Can be used with most tank coatings. Cleaning methods: with machines, manual praying, rock and roll, re-circulation.

DIRECTIONS FOR USECLEANING AND GAS FREEING OF DOUBLE BOTTOM AND DEEP TANKS AT SEA - ROCK AND ROLL METHOD1. Strip tank of all possible fuel. Where possible, heat fuel to assist removal, and trim vessel to give maximum stripping suction.2. Flush tank with seawater, while heating, stripping constantly. Ensure all other valves to and from the tank are closed.3. After flushing add first dosage of TANK CARE ECO to tank. Use 10 to 20 lt. of TANK CARE per 1000 lt. tank capacity. Fill tank to 25% capacity with seawater and apply heating where possible (up to 60°C maximum). Maintain for 24 hours.4. Fill tank to 95% capacity with seawater. Apply heating to 60°C maximum, if available, and maintain for 48 to 72 hours. If the sea is calm fill up the tanks enough for the solution to be in contact with the overheads.5. Discharge and strip tank. Fill 50% capacity with seawater. Maintain for 2 hours to allow rinsing. 6. Discharge tank and strip. Flush tank with seawater for 2 hours, stripping constantly.7. Add second dosage of TANK CARE to tank (10 to 15 lt. per 1000 lt. tank capacity). Fill tank with seawater to 90-95% capacity and apply heating to 60°C maximum, where available. Maintain for 48 to 72 hours.8. To gas free, fill tank with seawater through the sounding or vent pipe, and press up tank in order to

TANK CARE

ECO

Fast and effective

t a n k c l e a n e r

c o n t a i n i n g

p e t r o l e u m

s o l v e n t s ,


detergents and

su r f a c e-a c t i v e

agents

ź High solvent

power, rapid

penetration

ź R a p i d l y

emulsifies in

fresh or salt

water

ź Rapid rinsing

leaving clean, oil

free surface.

ź C on c en t r a t e d

product, effective

and economical

i n d i l u t e d

solutions

ź Non-corrosive to

metal and paint

finishes

ź S im p l e a n d

effective cleaning

of tanks at sea

ź Low toxicity when

mixed with sea

or fresh water

as recommended.

41











verification.

RECIRCULATION METHODThe chemical solution is prepared in a cargo tank near the pump room. The strength of the solution depends on the quantity of water required for circulation: 10 - 20 lt. per 1000 lt. of water. Depending on the size and the condition of the tank to be cleaned, the solution can be used only for three tanks after which a new solution should be made. After cleaning rinse the tanks thoroughly with seawater or fresh water, depending on availability and requirements

HAND SPRAYING METHODUseTANKCAREECOundilutedonthebulkheads,frames,stringersetc.,usingaspraygun.Afterpre-determined reaction time, rinse the tanks with water, using automatic tank-cleaning machines.For spotcleaning TANK CARE ECO can be used by hand, using a hose for rinsing. When applying these methods, the tanks must be gas-free before entering the tanks.

NATURE OF SPECIAL RISKS AND SAFETY ADVICEIn accordance with the latest EEC Council directives this product is subjected to:R51/53 : Toxic to aquatic organisms. May cause long-term adverse effects in the aquatic environmentR65 :Harmful; may cause lung-damage if swallowed

42











verification.

Water based and solvent free, biodegradable and safe for marin life.

APPLICATIONSBILGE REMOVER ECO is a general oil and grease remover for deck and engine room. Most suitable for removal of oil and grease from machinery parts, tank tops, bulkheads, decks and floor plates. BILGE REMOVER ECO is also used for cleaning of cargo tanks, bunker tanks and for spot cleaning.

DIRECTIONS FOR USEBILGE REMOVER ECO is applied by soaking, spraying or combined with scrubbing.SOAKINGDip parts to be cleaned into bath of undiluted BILGE REMOVER ECO Allow deposit to breaks up and loosen. Then rinse off with water (chemical cleaning module can be utilized for this application, allowing re-circulation of the product). A higher temperature of the solution (up to 60°C) always increases the cleaning power of the product.SPRAYING / CLEANING OF TANKSApply BILGE REMOVER ECO neat and allow product to penetrate into deposits for 15 to 20 minutes before rinsing off with water. For stubborn deposits some brushing may be necessary to accelerate removal. Before spraying a prewash with hot water of approx. 60°C is always helpful. For tanks: before cleaning with BILGE REMOVER ECO prewash with hot water of approx. 60ºC, except for drying and semidrying oils. Then spray with undiluted BILGE REMOVER ECO and let the product soak for at least 30 minutes. Rinse each tank for approx. 45 minutes with hot water at 60ºC.SCRUBBINGUse BILGE REMOVER ECO undiluted, agitate by scrubbing where soiling is not recent, is thick and/or trodden in. Rinse off with water.CLEANING OF COOLING SYSTEMSFill the cooling system with an emulsion of BILGE REMOVER ECO and

BILGE REMOVER ECO

General purpose

emulsifier cleaner

ź Highly effective

so lvent with

rapid penetration

ź Loosens and

b r e a k s u p

deposits quickly

ź S t r o n g


action

ź Easily rinsed

leaving surfaces

free of oil and

grease

ź Quick and easy

to use - saves

labor costs

ź Non-corrosive,

l ow t ox i c i t y

product


Appearance: l i g h t

yellow, amber

o r d a r k

brown liquid

Specic gravity:

0,85 - 0,9

(20°C)

43

GENERAL CLEANING

& MAINTENANCE OF

FREIGHT, EQUIPMENT,

STORAGES

44











verification.

APPLICATIONSELECTROCLEAN SLOW is used for cleaning and degreasing of electrical equipment such as motors, generators, switch gears, contacts, coils, winches, etc. It is also used for general degreasing and cleaning of machine parts and equipment without the need for rinsing. Safe on all metals, metal alloys and insulating varnishes (except for certain plastics).

DIRECTIONS FOR USEELECTROCLEAN SLOW is used undiluted. Do not dilute product or use with any solution or emulsion. Cleaning should be done out of the vicinity of any ignition source and well ventilated. Small parts can be cleaned by immersing them in a bath filled with ELECTROCLEAN SLOW. Large components can be cleaned by spraying with a non-atomizing spray, or brushing and wiping. Allow ELECTROCLEAN SLOW to completely evaporate leaving surface dry.

NATURE OF SPECIAL RISKS AND SAFETY ADVICEIn accordance with the latest EEC Council directives this product is subjected to:R36/38 : Irritating to the eyes and to the skinR45 :May cause cancerR52/53 : Harmful to aquatic organisms. May cause long-term adverse effects in the aquatic environmentR67 : Vapors may cause drowsiness, dizzynessR68 : Possible risk of irreversible effectsS2 : Keep out of reach of childrenS45 : In case of accident or if you feel unwell, seek medical advice immediately (show the label if possible)S53 : Avoid exposure, obtain special instructions before useS61 : Avo id re lease to the environment. Refer to special instructions / safety data sheets

ELECTROCLEAN SLOW

General purpose,

s l o w - d r y i n g

degreasing solvent

and electrical

parts cleaner

ź Fast penetrating

action, removes

contaminat ion

from all common

electrical parts

ź Can be applied

w i t h n o n -

atomizing spray

avoiding the

n e e d t o

dismantle parts

ź Slow evaporation

allows parts to

be cleaned in a

bath

ź Leaves surfaces

completely clean

after drying


Appearance: c l e a r

c o l o r l e s s

liquid

Corrosive action:

n o n e

corrosive on

metals, test

45











verification.

APPLICATIONS

ELECTROCLEAN FAST is a safe cleaner for electrical equipment such as motors, generators, switchgear, contacts, coils etc. Rinsing is not required after degreasing. Can be used on all metals, metal alloys and insulating varnishes (except for certain plastics). Preliminary test shou l d be conduc t ed on polymethacrylate and silicone varnishes

DIRECTIONS FOR USE

ELECTROCLEAN FAST is used neat. Do not dilute or use in any solution or emulsion. Apply by brushing, dipping, or with non-atomizing spray. Allow ELECTROCLEAN FAST to completely evaporate, leaving surface dry.


In accordance with the latest EEC Council directives this product is subjected to:

R36/38 : Irritating to the eyes and to the skin

R45 : May cause cancer

R52/53 : Harmful to aquatic organisms. May cause long-term adverse effects in the aquatic environment

R67 : Vapors may cause drowsiness, dizzyness

R68 : Possible risk of irreversible effects


S45 : In case of accident or if you feel unwell, seek medical advice immediately (show the label if possible)

S53 : Avoid exposure, obtain special instructions before use

S61 : Avoid release to the environment. Refer to special instructions / safety data sheets

ELECTROCLEAN FAST

F a s t - d r y i n g

electrical parts

cleaner

ź Non flammable

ź R a p i d

penetration

ź F a s t a n d

powerful solvent

ź Quick, controlled

evaporation

ź C o m p l e t e

e v a p o r a t i o n

leaving clean dry

surface

ź High dielectric

c o n s t a n t .

Disruptive force

more than 23,000

volts

ź TLV of 350 PPM -

less toxic than

c a r b o n

tetrachloride (10

PPM)

ź Recommended

for application

b y n o n -

atomizing spray

avoiding the

need of extensive

dismantling

PRODUCT

46











verification.

APPLICATIONS

DEGREASER HD is a general oil and grease remover for deck and engine room. Most suitable for removal of oil and grease from machinery parts, tank tops, bulkheads, decks and floor plates. DEGREASER HD is also used for cleaning of cargo tanks, bunker tanks and for spot cleaning.

DIRECTIONS FOR USE

DEGREASER HD is applied by soaking, spraying or combined with scrubbing.

SOAKING

Dip parts to be cleaned into bath of undiluted DEGREASER HD Allow deposit to breaks up and loosen. Then rinse off with water (chemical cleaning module can be utilized for this application, allowing re-circulation of the product). A higher temperature of the solution (up to 60°C) always increases the cleaning power of the product.

SPRAYING / CLEANING OF TANKS

Apply DEGREASER HD neat and allow product to penetrate into deposits for 15 to 20 minutes before rinsing off with water. For stubborn deposits some brushing may be necessary to accelerate removal. Before spraying a prewash with hot water of approx. 60°C is always helpful.

For tanks: before cleaning with DEGREASER HD prewash with hot water of approx. 60ºC, except for drying and semidrying oils. Then spray with undiluted DEGREASER HD and let the product soak for at least 30 minutes. Rinse each tank for approx. 45 minutes with hot water at 60ºC.

SCRUBBING

Use DEGREASER HD undiluted, agitate by scrubbing where soiling is not recent, is thick and/or trodden in. Rinse off with water.

CLEANING OF COOLING SYSTEMS

Fill the cooling system with an emulsion of DEGREASER HD and water, Depending on the degree of contamination, 100 lt. of cleaning liquid should contain 5-10 lt. of DEGRESANT HD Allow this emulsion to

DEGREASER HD

General purpose

emulsifier cleaner

ź Highly effective

so lvent with

rapid penetration

ź Loosens and

b r e a k s u p

deposits quickly

ź S t r o n g


action

ź Easily rinsed

leaving surfaces

free of oil and

grease

ź Quick and easy

to use -saves

labor costs

ź Non-corrosive,

l ow t ox i c i t y

product



light yellow,

amber o r

dark brown

liquid

Corrosive action:

metal -

none

pa i n t -

47











verification.

APPLICATIONS

DESCAL LIQUID is suitable for removal of hardness scale and/or iron oxides from boilers, condensers, evaporators, heat exchangers, cooling systems etc. It must not be used on zinc, aluminum, galvanized materials, cast iron and stainless steel.

DIRECTIONS FOR USE

Descaling can be accomplished by circulation. For large components and systems, use in-situ soaking. For small components soak in immersion bath. The most effective method is by circulation as it ensures renewal of acid film in contact with the scale.

CIRCULATION METHOD

If deposits to be removed are covered with oil or grease, a degreasing treatment with a solution of 2% to 8% of ALKACLEAN, CARBON REMOVER, SEACLEAN with water should be carried out prior to descaling. Circulate solution for 4 to 6 hours with a temperature of 60°C. After degreasing, start descaling treatment with a solution of 10% to 20% DESCAL LIQUID with water. The solution should be circulated for 24 to 36 hours for hardness scale, and 1 to 4 hours for iron oxide scale, depending on nature and state of the deposits. Ensure circuit is vented at the highest point to release gases produced during the descaling treatment. Cleaning solution may be heated to increase the descaling process rate. Do not exceed 40°C as chlorine gas may be liberated above this temperature. Check the acid concentration of the solution regularly. If it drops to less than 1/2 initial concentration, regenerate the solution by adding more DESCAL LIQUID . Determination of the acid concentration may be found using an ACIDITY TEST KIT The progress of operation may be followed by placing scale samples in easily observed positions, When the samples are completely dissolved and effervescence has stopped, circulate for one more hour then drain system thoroughly. Rinse thoroughly with water then drain. To neutralize any

DESCAL LIQUID

Heavy duty acid

c o m p o u n d

c o n t a i n i n g

d e s c a l i n g

accelerators and

c o r r o s i o n

inhibitors

ź Fast and efficient

removal of scale

and iron oxides

ź C o n t a i n s

d e s c a l a n t

accelerator to

i n c r e a s e

reactions

ź C o n t a i n s

p r o t e c t i v e

c o r r o s i o n

inhibitor against

attack on ferrous

metals

ź H i g h l y


product

ź In-situ cleaning

eliminates need

for extensive

dismantling



clear liquid

Corrosive action:

48











verification.

APPLICATIONSDESCAL POWDER is suitable for removing water scale and rust in diesel engine cooling water systems, boilers, evaporators, condensers etc.

DIRECTIONS FOR USEDescaling can be accomplished by circulation, for large components and systems, by in-situ soaking, or by soaking in an immersion bath for small components. The most effective method is by circulation as it ensures renewal of acid film in contact with the scale.

CIRCULATION METHODIf the deposits to be removed are covered with oil or grease, a degreasing treatment with a solution of 2% to 8% ALKACLEAN, CARBON REMOVER or SEACLEAN with water should be carried out prior to descaling. Circulate the solution for 4 to 6 hours. To accelerate the cleaning process the solution should be heated up to a temperature of 60°C. After degreasing, a descaling treatment with a solution of 5% to 10% by weight of DESCAL POWDER with water should be circulated for 24 to 36 hours for hardness scale, and 1 to 4 hours for derusting, depending on nature and state of deposits. To avoid saturating the solution, do not exceed solution strength of 10%. Ensure circuit is vented at the highest point to release gasses produced during descaling operations. Product solution may be heated to increase the descaling process rate up to a maximum of 60°C. Over 35°C slight corrosion may occur on light alloys and galvanized surfaces . Check the acid concentration of the solution regularly by observing its state and color. The initial color is pink and if the color turns yellow the effectiveness disappears. Regenerate the solution by adding more DESCAL POWDER until solution regains initial color. To avoid the possibility of a saturated solution, no more than 2 regenerations should be made. If further treatment is necessary the circuit should be drained and a fresh

DESCAL POWDER

Heavy duty acid

c o m p o u n d

c o n t a i n i n g

d e s c a l i n g

accelerators and

c o r r o s i o n

inhibitors


removal of scale

and iron oxides

ź C o n t a i n s

d e s c a l a n t

accelerator to

i n c r e a s e

reactions

ź C o n t a i n s

p r o t e c t i v e

c o r r o s i o n

inhibitor against

attack on ferrous

metals

ź H i g h l y


product

ź In-situ cleaning

eliminates need

for extensive

dismantling



clear liquid

Corrosive action:

49











verification.

APPLICATIONSLUBOIL SEPARATOR CLEANER is an especially formulated blend of surfactants, solvents and acids designed to remove carbonaceous and varnish deposits from lube-oil and fuel-oil separator discs.

DIRECTIONS FOR USEIt is recommended to immerse the discs in a diluted solution of. Depending upon the amount of deposits, use a solution containing 1 part of cleaner to 4 - 8 parts of water. Any suitable metal container (except galvanized) or dip tank can be used to contain the cleaning solution. The solution can be used at ambient temperature of 50°C - 60°C (122°F - 140°F). Do not immerse bronze or brass support column in the cleaning solution, corrosion of these materials will likely occur. Remove the stainless steel discs from the support column and place only these stainless steel parts in the cleaning solution. After cleaning has been completed, thoroughly rinse the parts with plenty of fresh water.

NATURE OF SPECIAL RISKS AND SAFETY ADVICEIn accordance with the latest EEC Council directives this product is subjected to:R22 : Harmful if swallowedR35 : Causes severe burnsR51/53 : Tox i c t o aqua t i c organisms. May cause long-term adverse effects in the aquatic environmentS2 : Keep out of reach of childrenS23 : Do not breathe gas, fumes, vapor and sprayS24 : Avoid contact with skinS26 : In case of contact with eyes, rinse immediately with plenty of water and seek medical adviceS36/37/39 : W e a r s u i t a b l e protective clothing, gloves and eye / face protectionS45 : In case of accident or if you feel unwell , seek medical advice immediately (show the label if possible)

LUBOILSEPARATOR CLEANER

ź R e m o v e s

c a r b o n a c e o u s

and va rn i sh

deposits from

discs

ź Reduces cleaning

time

ź Safe to use and

does not corrode

disc material



c l e a r

w h i t e o r

a m b e r

liquid

S p e c i c

g r a v i t y :

1,06 (20°C)

p H ( n e a t ) :

1,9

I M O C l a s s :

8 / II

U N N u m b e r :

3265

A D R :

8.40b)

50











verification.

DESCRIPTIONAIR COOLER WASHER (ACW) is a liquid blend of highly active cleaning compounds and corrosion inhibitors. ACW has been developed for safe, fast and economical in-service cleaning of the air handling systems of turbo charged diesel engines. By using ACW, airborne contaminants that have been carried into and deposited on scavenger air trunks, air coolers and inlet valves are removed. Thus, all surfaces are kept clean and free ofdeposits.

ADVANTAGES1. By using ACW and the ACW INJECTION SYSTEM, fouling of air coolers is reduced so heat transfer and engine efficiency are improved. Pressure drops across the air cooler and air temperature after the air cooler are keptto a minimum. 2. Fire hazards from the build-up of grease and residue are minimized.3. Down time and expense of periodic dismantling of the air handling system for cleaning is eliminated. 4. Scavenging efficiency is improved by the reduction of deposit build-up around scavenging ports. 5. Water displacing surfactants incorporated in ACW form a mono-molecular film throughout the air handling system that protects the metal and reduces the adherence of airborne contaminants.

USAGEACW is suitable for all types of diesel engines. The ACW / fresh water mixture has no flash point and cylinder lubrication is not impaired.

DOSAGEThe following table shows our recommendation for initial dosage per air cooler. This is based on one injection every 24 hours. This can be varied based on performance of the pressure drops across the air coolers.

Suggested daily usage table (Table A):

AIR COOLER WASHER

Liquid cleaner

containing solvents

and surface-active

agents for on-line

a n d o f f - l i n e

cleaning of charge

air coolers

ź Effective removal

o f o i l y

contaminants

ź On-line cleaning

saves time and

m a i n t e n a n c e

costs

ź C o m p l e t e l y

combustible in

the cylinder

ź Does not damage

cylinder oil film



c l e a r

amber liquid

( l i g h t

yellow or dark

brown)

Corrosive action:

metal – none

p l a s t i c ,

rubber, paint:

m a k e

51

IMMERSION METHOD

(generally ACW is used undiluted)

The dismantled parts to be cleaned are laid in a tank specially designed for the purpose, which has been filled with undiluted ACW. Movement is achieved by means of compressed air. Wash surface with high-pressure water hose or compressed air. ACW can be reused f o r se ve ra l cleanings. Cleaning time: 5-12 hours.

CIRCULATION METHOD

(for in-place cleaning - generally ACW is used undiluted) See Diagram B

1. Arrange to collect ACW at bottom of unit with drain back to drum.

2. Circulate by pump and/or spray (airless spray or steady low-pressure flow - do not atomize) on deposits through access doors. A perforated pipe placed between tubes is effective for reaching normally inaccessible tubes.

3. Thoroughly saturate deposits and allow to stand for one hour minimum.

4. Wash off with high-pressure water hose and drain to collecting tank.

5. Dry with compressed air.

CLEANING FUEL OIL HEATERS OR LUBE OIL COOLERS -See Diagram C

For best results ACW should be circulated through the heat exchange unit for 6 to 8 hours,depending on the amount of deposits present and the length of time since the last cleaning. When ACW is used as a preventive maintenance item periodically, circulating times can be substantially reduced.

ACW solution can be saved and reused until it becomes thoroughly contaminated. Flushing unit with kerosene before using ACW will prevent excessive dilution. During cleaning, solids may accumulate in reservoir drum. These solids may be removed by allowing the solution to settle and decanting clean liquid from the top. When cleaning action of ACW has been reduced by excessive dilution with fuel oil, the material can then be dumped into the bunker tanks and then burned.

52

For circulating ACW a pump with a large discharge volume should be used in order to insure rapid flow through the unit. A 50 or a 200 liters drum fitted with a wooden cover containing an opening for the discharge pipe can be used as a reservoir. Use enough ACW to fill the unit, piping and enough additional material to keep the reservoir one third full. Take pump suction from the reservoir and discharge into the lowest connection on the heat exchanger. Pipe the overflow from the highest point on the heat exchanger back into the reservoir. A fine mesh screen should be adapted to the reservoir return to remove large pieces, which become dislodged during the cleaning operation. To avoid the dislodging of loosened particles, a method of backflushing can be used as indicated in schematic drawing showing recommended hood-ups for use of .

INJECTION METHOD USING ACW (DAILY) UNDERWAYDilute with water as per dosage diagram. See diagram ATo inject ACW use an INJECTION SYSTEM as those fabricated by VECOM.This system consists of a steel 6 liter dosage tank, complete with all necessary valves, an atomizer and required fittings for 6x8 mm copper tubing. The dosage tank may be installed in any appropriate place in the engine room. Copper tubing (6x8 mm) is fitted from the dosage tank to the atomizer, from the dosage tank to the casing on the pressure side of the turbo blower (equalizing line), and from the ships’ compressed air system to the atomizer.

By m eans of the INJECTION SYSTEM a mixture of ACC and fresh water in a ratio of 1:3 (observe the mixture ratio exactly) is injected into the air channel between the turbo blower and the air cooler. This is followed by a second injection of fresh water only. Injection procedure as per the ACW injection system diagram is as follows:

53

INSTALLATION DRAWINGSThese installation drawings are only a guide for typical installations. Air trunking dimensions, configuration and baffles arrangement may differ between engines of the same model. Physical inspection is necessary to ensure that nozzles are correctly sited and installed. These drawings are not to scale. All dimensions are in millimeters.

55











verification.

APPLICATIONSCARBON RELEASER is used undiluted for breaking down and separates residual combustion products and by-products distillation of mineral oils. Suitable for cleaning burner tips, lube / fuel oil filters, oil coolers, fuel injectors and machines parts.

DIRECTIONS FOR USESOAKINGBurner tips, oil filters, injectors and machine parts can be cleaned effectively by soaking in a tank of undiluted CARBON RELEASER. Put the components in the tank and soak for 2 to 10 hours depending on the degree of soiling. Most deposits can be removed at ambient temperatures. If deposits are particularly hard to dissolve, heat up to maximum of 50°C in a properly ventilated area.

CIRCULATIONHeavy oil heaters, heat exchangers, oil coolers and equipment not possible to be dismantled for cleaning by soaking may be cleaned effectively by circulating undiluted CARBON RELEASER through the equipment for 4 to 10 hours depending on the degree of soiling. Remove excessive deposits by blowing compressed air or steam through the system prior to circulation.

NATURE OF SPECIAL RISKS AND SAFETY ADVICEIn accordance with the latest EEC Council directives this product is subjected to:R24/25 : Toxic in contact with skin and if swallowedR34 : Causes burnsR40 : Possible risks of irreversible effectsR50/53 : Very toxic to aquatic organisms, may cause long-term

adverse effects in the aquatic environmentR65 : Harmful, may cause lung-damage if swallowedS2 : Keep out of reach of childrenS23 : Do not breathe gas, fumes,

CARBON RELEASER

Solvent emulsifier

for removal of

c a r b o n a c e o u s

deposits

ź Quickly dissolves

d e p o s i t s

c o n t a i n i n g

carbon, resins or

varnishes

ź Eliminates need

f o r h a n d

scraping

ź S im p l e a n d

economical to

use

ź Soaking and

c i r c u l a t i o n

m a k e s

dismantling of

p a r t s

unnecessary

ź High flash point

solvent



brown /

amber liquid

Corrosive action:

none

Specic gravity:

1,1 (20°C)

56











verification.

APPLICATIONS

RUST SHIELD is used for removing light rust from iron and steel surfaces. It also cleans and brightens aluminum and copper. Rust stains on painted surfaces, porcelain, terrazzo, ceramic tiles, wood etc can be removed with RUST SHIELD. It is also used as a protective pretreatment for iron and steel prior to painting.

DIRECTIONS FOR USE

Remove loose dirt and rust scale by sweeping or brushing prior to applying RUST SHIELD.

Apply RUST SHIELD with brush to surfaces to be treated or by soaking for smaller parts as follows:

ź Use undiluted for severely corroded and soiled surfaces.

ź Use diluted in solution of 1 part RUST SHIELD to 2 or 4 parts water for aluminum and less corroded or soiled surfaces.

ź Rinse thoroughly with water after 10 to 15 minutes from application. When used on aluminum rinse off within 5 minutes from application.

RUST SHIELD is also used for removing lime deposit in cargo tanks during tank cleaning operations. Normally, 0.5% solution of RUST SHIELD circulated via the tank washing machine for about 20 minutes is sufficient.

NOTE: RUST SHIELD is not recommended for use on zinc or galvanized surfaces.


In accordance with the latest ECC Council directives this product is subjected to:

R34 : Causes burns S2 : Keep out of reach of children

RUST SHIELD

Liquid detergent

c o m p o u n d

c o n t a i n i n g

phosphoric acid

and non-ionic

surfactants for

cleaning of non-

ferrous metals and

removal of rust

stains

ź C o m p l e t e l y

removes light

rust and stains

from metal and

wooden surfaces

ź Powerfull against

attack on ferrous

metal;

ź C l e a n s a n d

b r i g h t e n s

aluminum and

copper

ź Forms protective

coating on steel

surfaces to which

paint adheres

readily

ź Biodegradab le

a n d n o n -

flammable



c l e a r

57











verification.

APPLICATIONS

RUST SHIELD is used for removing light rust from iron and steel surfaces. It also cleans and brightens aluminum and copper. Rust stains on painted surfaces, porcelain, terrazzo, ceramic tiles, wood etc can be removed with RUST SHIELD. It is also used as a protective pretreatment for iron and steel prior to painting.

DIRECTIONS FOR USE

Remove loose dirt and rust scale by sweeping or brushing prior to applying RUST SHIELD.

Apply RUST SHIELD with brush to surfaces to be treated or by soaking for smaller parts as follows:

ź Use undiluted for severely corroded and soiled surfaces.

ź Use diluted in solution of 1 part RUST SHIELD to 2 or 4 parts water for aluminum and less corroded or soiled surfaces.

ź Rinse thoroughly with water after 10 to 15 minutes from application. When used on aluminum rinse off within 5 minutes from application.

RUST SHIELD is also used for removing lime deposit in cargo tanks during tank cleaning operations. Normally, 0.5% solution of RUST SHIELD circulated via the tank washing machine for about 20 minutes is sufficient.

NOTE: RUST SHIELD is not recommended for use on zinc or galvanized surfaces.


In accordance with the latest ECC Council directives this product is subjected to:

R34 : Causes burns S2 : Keep out of reach of children

PENETRATING OIL

Effectively removes

pet coke and

mineral depos its

from cargo holds

and tanks.

Can a lso be

efficiently used as

a general pu pose

c l e a n e r t o

el iminate bad

odors in tanks and

o t h e r c l o s e d

systems.

Acts quickly and

thoroughly.

Can safely be used

on all metals and

metal al loys (even

if painted /

varnished).

Non–f l ammab le ,

n o n – t o x i c ,

non–conductive &

non–volatile.

Soluble in sea

water and fresh

water.

No known effect on

rubber or plastic

compounds.

May be combined

with a specific

range of other

products.

Cost effective, easy

to apply and use.

58











verification.

DESCRIPTIONAn environmentally friendly, non-toxic, completely biodegradable multipurpose cleaner. This water-based product has high degreasing properties due to the use of natural citrus oil solvents and advanced wetting agents.

APPLICATIONSMixed in different concentrations, this product can be used for many purposes:ź General marine cleaning: removal of grease, oil, sludge, carbon deposits, polymer compounds, general dirt and grime, vegetable and animal oils and greases.

ź As an engine room cleaner: for cleaning paintwork, as a carbon remover, to soak tanks, for ultrasonic and high pressure cleaning.

ź Ecoclean can be used to clean the cargo tank of vegetable, fish, animal and mineral oils, petroleum based chemicals, hydrocarbon freeing of cargo tanks and for the cleaning and degreasing of double bottoms, deep tanks, bilges etc.

ź As a general cleaner it is used for bulkheads, deck and toilets. The product is safe to use on most types of plastics and vinyl.

After its use it demulsifies in the bilges or sloptanks and it is suitablefor use with an oil / water separator.

DIRECTIONS FOR USEGENERAL CLEANINGENVIROCLEAN can be applied by brush, spraygun, in an ultrasonic tank-system, in immersion baths with neat product or diluted in water up to 10% according to the type and amount of contamination to be removed. After application in the engine room, slops must be allowed to separate for approx. 3 hours before treatment in the oil / water separator.TANK-CLEANINGWhen using an automatic tank-wash system inject directly into the BWT line or gun-cleaner in a solution of

ENVIROCLEAN

ź New advanced

e c o l o g i c a l

formula

ź W a t e r b a s e d

degreaser

ź Non-flammable

ź Non-toxic

ź No risk of water

pollution during

d i s p o s a l

operation

ź Compatible with

o i l / w a t e r

separators

ź Promotes an

hea l thy and

pleasant smell in

the working area

ź Very economical

dilution rate

ź Compatible with

all types of tank

coatings



c l e a r

liquid

C o r r o s i v e

a c t i o n :

metal: do not

use with aluminum

59











verification.

APPLICATIONS

GENERAL CLEANER is a superior liquid detergent with good foaming properties. The active wetting agents give rapid penetration to

remove light oil and dirt from all surfaces. It is used in the galley, accommodation and engine room aboard

ships, launches and maintenance department of all industries. Also used for cleaning reefer boxes, woodwork and decks.

DIRECTIONS FOR USE

GENERAL CLEANER should be diluted at the rate of 2 teaspoons to 1/2 cup per 5 lt. of warm water depending on the

degree of contamination. Or 1 cup of GENERAL CLEANER to a bucket of water. Cleaning can be applied by mops,

brush or dipping the soiled parts into a bath.

It is not recommended to use GENERAL CLEANER with washing machines, due to high foaming properties.

NATURE OF RISKS AND SAFETY ADVICE



GENERAL CLEANER

General purpose

b i o d e g r a d a b l e

cleaner

ź V e r y


p r o d u c t ,

economical to

use

ź Non-flammable

ź Pleasant odor

ź Cleans and leaves

surfaces free of

residues

ź Biodegradable,

acceptable for

use in food areas



c l e a r

liquid, amber

or green

C o r r o s i v e

a c t i o n :

none on

c e m e n t ,

asphalt ,

c e r a m i c

t i l e s ,

v i n y l o r

m e t a l

60











verification.

DESCRIPTIONALCACTIVE LIQUID is a water based liquid solution, containing specific salts, detergents, wetting agents and corrosion inhibitors.

APPLICATIONALCACTIVE LIQUID is formulated to attack and remove vegetable and animal fats and oils from epoxy coatings and from most of the common ferrous alloy metals. Moreover, it can safely be applied on Tin, Zinc and/ or Zinc Silicate, Aluminum and galvanized surface coatings and materials. Also ideal to use for “Gas–Free” when sprayed after any hydrocarbon cleaning process as it discharges an additional pleasant fresh aroma.

DIRECTION FOR USE

A. Dosing ProcedureRock and Roll method: Add 15–20

litres of ALCACTIVE LIQUID for every ton of water at the point where the tank is filled to 30% of its capacity.Circulation method: A solution of

5–10% must be prepared by diluting ALCACTIVE LIQUID with water.Injection method: Prepare a solution

of 3–6% by diluting ALCACTIVE LIQUID with water.

B. Cleaning ProcedureRock and Roll method: After you

have filled the tank with water (fresh or seawater) to 30% of its capacity and added the required amount of ALCACTIVE LIQUID, let it stand for approximately 24 hours. Then fill tank with more water, up to 90% of its capacity level. This way the tank will be cleaned by natural agitation due to wave motion. Leave for a few days, then drain the tank completely and rinse off by

ballasting–deballasting the tank 2–3 times with water.

Circulation method: After the solution is prepared, apply by circulating for approximately 6–8 hours. Thereon, wash thoroughly with water.

ALCACTIVELIQUID

ź N o n – t o x i c ,

non–flammable

a n d

non–corrosive.

ź General purpose

c l e a n e r t o

remove oil and

grease deposits.

ź May be applied to

any ferrous alloy

metals.

ź Acts as an odor

b i n d e r a n d

eliminator.

ź Cost effective,

easy to handle

and apply



Colorless

liquid

O d o r :

S o f t ,

lemon odor

S p e c i f i c

g r a v i t y :

1 . 0 2

gr/cm3 at

15°C

pH : 8

61











verification.

APPLICATIONSBILGE REMOVER is a general oil and grease remover for deck and engine room. Most suitable for removal of oil and grease from machinery parts, tank tops, bulkheads, decks and floor plates. BILGE REMOVER is also used for cleaning of cargo tanks, bunker tanks and for spot cleaning.

DIRECTIONS FOR USEBILGE REMOVER is applied by soaking, spraying or combined with scrubbing.SOAKINGDip parts to be cleaned into bath of undiluted BILGE REMOVER Allow deposit to breaks up and loosen. Then rinse off with water (chemical cleaning module can be utilized for this application, allowing re-circulation of the product). A higher temperature of the solution (up to 60°C) always increases the cleaning power of the product.SPRAYING / CLEANING OF TANKSApply BILGE REMOVER neat and allow product to penetrate into deposits for 15 to 20 minutes before rinsing off with water. For stubborn deposits some brushing may be necessary to accelerate removal. Before spraying a prewash with hot water of approx. 60°C is always helpful.For tanks: before cleaning with BILGE REMOVER prewash with hot water of approx. 60ºC, except for drying and semidrying oils. Then spray with undiluted BILGE REMOVER and let the product soak for at least 30 minutes. Rinse each tank for approx. 45 minutes with hot water at 60ºC.SCRUBBING Use BILGE REMOVER undiluted, agitate by scrubbing where soiling is not recent, is thick and/or trodden in. Rinse off with water.CLEANING OF COOLING SYSTEMSFill the cooling system with an emulsion of BILGE REMOVER and water, Depending on the degree of contamination, 100 lt. of cleaning liquid should contain 5-10 lt. of BILGE REMOVER. Allow this emulsion to circulate for 12-24 hours at a maximum temperature of 60ºC. After

BILGE REMOVER

General purpose

emulsifier cleaner

ź Highly effective

so lvent with

rapid penetration

ź Loosens and

b r e a k s u p

deposits quickly

ź S t r o n g


action

ź Easily rinsed

leaving surfaces

free of oil and

grease

ź Quick and easy

to use - saves

labor costs

ź Non-corrosive,

l ow t ox i c i t y

product



light yellow, amber

or dark

brown liquid

C o r r o s i v e

action:

metal - none

paint - none

r u b b e r -

62











verification.

APPLICATIONSThe loading of ballast water often results in the deposition of mud, silt and sediment in the ballast tanks, due to the presence of these materials in the waters where ballast is lifted. If this is not dealt with on a regular basis, a "permanent ballast" may accumulate, causing problems when emptying the tank. Can help preventing this build-up, resulting in more efficient operation of the vessel.

ADVANTAGESź Prevents formation of hard-packed layers of mud and sediment in tanks. A loose deposit is formed, which can easily be removed.

ź Increases cargo payload by decreasing unwanted mud and silt in tanks.

ź Eliminates the considerable manual labor required to remove deposits.

ź Highly economical - very effective at low concentrations

ź Non-polluting, non-toxic and non-corrosive

ź Safe and easy to use

DIRECTIONS FOR USE - PRODUCT DOSAGEMUD CLEANER may be used neat or diluted with water in any convenient proportion.

MAINTENANCE TREATMENTź Apply MUD CLEANER directly to the tank prior to each ballasting operation

ź D o s e M U D C L E A N E R i n concentrations of 0,5 lt. per 10 tons of ballast water. The dosage will depend on the severity of contamination in the area where ballast water is loaded.

MUD LIFTING TREATMENTź For existing accumulations of mud and silt in tanks, apply the maximum dosage of 1 lt. of product per 10 tons tank capacity.

ź Fill tank to 50% capacity with seawater.

ź Allow the rolling motion of the ship

MUD CLEANER

Liquid organic

po lye lectro lyte ,

conditioner for

mud and silt in

ballast tanks

ź P r e v e n t s

formation of

h a r d - p a c k e d

layers of mud

and silt

ź Non polluting

ź Safe and easy to

use

ź Effective at low

concentrations

ź H i g h l y

economical



colorless viscous

liquid

C o r r o s i v e

action: none

Specic gravity:

1,0 (20°C)

p H n e a t :

9,6

I M O C l a s s :

not regulated

U N N u m b e r :

not regulated

63











verification.

WATERBASED HYDROCARBON FREE

APPLICATIONS WATERBASED HYDROCARBON FREE can be used for the removal of vegetable oil, animal oil, fats and light mineral oils in aluminum and zinc silicate coated tanks. It is also being used as an after treatment agent in hydrocarbon free cleaning operations where cleaning has been carried out with BILGE REMOVER or TANK CARE .

DIRECTIONS FOR USE

TANK CLEANING It is recommended to pre-wash the tanks with hot water at 50°C. For drying and semi-drying oils a pre-wash with cold water should be carried out immediately after discharge of cargo to retard oxidation and hardening of oils residues.

RE-CIRCULATION METHOD WATERBASED HYDROCARBON FREE is circulated in a 5% solution for a period of 2 to 6 hours. The temperature of the cleaning solution should be between 20 to 60°C. After circulation period rinse thoroughly with fresh water. A chemical solution is prepared in an empty clean slop tank or one of the after tanks near the pump room. The solution is circulated via the automatic tank washing system pump and heater to the tank to be cleaned. The solution is returned to the solution tank via the stripping line. Usually it is not possible to re-circulate the solution through the tank washing system heater (to maintain solution temperature during cleaning) without making a temporary connection between the solution tank and the tank washing pump. Capacities of solution tank, pipeline, connecting hoses, pumps...etc, should be calculated carefully to ensure sufficient solution is available to maintain continuous re-circulation. Depending on the size and condition

WATERBASED HYDROCARBON

FREE

Neutral l iquid

degreasing agent

for removal of

edible oils from

zinc silicate coated

tanks

ź Blend of highly

efficient and low

foaming nonionic

surface active

agents

ź S p e c i a l l y

developed for

situations where

cleaning with

Alkaclean is not

possible

ź Sui tab le for

cleaning tanks

with zinc silicate

coating and all

common metals



clear liquid

C o r r o s i v e

action: su i t a b l e

f o r u s e o n

z i n c

s i l i c a t e

64











verification.

DESCRIPTIONCHLORINE TABLETS contain an active ingredient of 70% calcium hypochlorite. They dissolve slowly and release available chlorine uniformly over a period of time, avoiding the trouble of repeated application. Have a slightly alkaline reaction with water. CHLORINE TABLETS contain an oxidation agent and will evolve free chlorine in acid solution.

APPLICATIONCHLORINE TABLETS are used as a disinfectant of supply water and treatment of sewage systems.

TREATMENT OF SEWAGE SYSTEMSTo treat sanitation system, the tablet is added into the system to maintain residual chlorine of between 10 to 20 PPM. CHLORINE TABLETS 200 gr. (Sanuril 115 or Hichlor type / Trichlorineisocianuric Acid 90%) For chlorinating swimming pools, sewage and waste water. Standard tablet size: 75 mm diameter - 25 mm H. For swimming pool water treatment: 4 large tablets every 100 m3 of water to be put in skimmers or in floating trays. For wastewater treatment, fill the chlorinating pipes until 2 to 5 PPMof residual active chlorine is obtained. If below 2 PPM, use both chlorinating pipes.

DISINFECTION OF WATER SYSTEMSTo disinfect reservoir water, tablet is added into the water to maintain residual chlorine of between 0.2 to 0.5 PPM. Initial recommended dosage should be 1 to 2 tablets per 4.5 ton of water.Recommended dosage is listed in the table below.

CHLORINE TABLETS

Desinfectant for

portable water

system & sewage

system

ź Tablets dissolve

slowly

ź R e l e a s e s

a v a i l a b l e

c h l o r i n e

uniformly

ź Easy to use

Dosage Table

Tons of No. of water tablets

4 1 - 2

8 2 - 3

16 4 - 5

32

8 - 10

64

16 - 20

65











verification.

APPLICATION

CEMENT REMOVER is used for removing

cement residues from all common

metal surfaces. It must not be used

on zinc, aluminum, galvanized

materials and stainless steel.

DIRECTIONS FOR USE

Apply CEMENT REMOVER with brush to

surfaces to be cleaned.

ź Use undiluted for hard cement

deposits on the surfaces.

ź Use diluted in solution of 1 part

CEMENT REMOVER to 5 - 10 parts

water, depending on the thickness

of the cement layer.

ź Rinse thouroughly with water after

10 to 15 minutes after application.


ADVICE



subjected to:

R34 : Causes burns

R37 : Irritating to respiratory

system



rinse immediately with plenty o f



immediately with plenty of w a t e r

and seek medical advice

S36/37/39 : W e a r s u i t a b l e

protective clothing, gloves and eye /

face protection

S45 : In case of accident or if you

feel unwell , seek medical

advice immediately (show the label if

possible)

CEMENTREMOVER

S t r o n g a c i d

c o m p o u n d

specially designed

for the removal of

cement deposits

f r o m m o s t

common surfaces


cement removal

ź Inhibited against

attack on ferrous

metals

ź Forms protective

coating on steel

surfaces to which

paint adheres

readily

ź Biodegradab le

a n d n o n

flammable



yellow

C o r r o s i v e

action: inhibited

a g a i n s t

attack on ferrous

metals

Specic gravity:

1,1 (20蚓)

66











verification.

FILTER CLEANER

Liquid cleaner for removing partially carbonized oil in oil coolers and filters

ź Non-corrosive

ź Prevents forma-

tion of coke-

like deposits re-

circulation

method

ź Suitable for

cleaning oil cool-


Appearance:

light yellow - brown liquidCorrosive action:

not corro-sive on mostcommon metals, synthetic Specific gravity:

1,0-1,1 (20°C)Flash point:

62°CpH 1% solution:

7 - 9

IMO Class:

6.1 / IIIUN Number:

1591ADR:

6.1,15c)

APPLICATIONS

FILTER CLEANER is used for cleaning metal and ceramic oil f i lters. It is also used for cleaning oil heaters using re-circulation method. Regular cleaning with FILTER CLEANER prevents formation of coke-like deposits.

DIRECTIONS FOR USE

FILTER CLEANER is used undiluted. The temperature of the cleaning solution should not be allowed to exceed 60°C. Filters and oil coolers can be cleaned by soaking in bath of FILTER CLEANER or by re-circulating the product through the equipment with a circulation pump and tank connection. Cleaning time various from between 6 to 24 hours depending on the degree of contamination.



R20

: Harmful at inhalation.R40

: Possible risks of irreversible effectsR51/53

: Toxic to aquatic organisms, may cause long-term adverse

effects in the aquatic environmentR65

: Harmful, may cause lung-damage if swallowedS2

: Keep out of reach of childrenS24/25

: Avoid contact with skin and eyesS60

: The material and its container must be disposed of as

hazardous wasteS61

: Avoid release to the environment. Refer to special

instructions / safety data sheetsS62

: If swallowed do not induce vomiting, seek medical advice. Immediately show this container or label

67

APPLICATIONS

LIQUID SOAP is a superior liquid

detergent with good foaming

properties. The active wetting agents

give rapid penetration to remove light

oil and dirt from all surfaces. LIQUID

SOAP is used in the galley,

accommodation and engine room

aboard ships, launches and

maintenance department of all

industries. Also used for cleaning

reefer boxes, woodwork and decks.

DIRECTIONS FOR USE

LIQUID SOAP per 5 lt. of warm water


contamination. Or 1 cup of LIQUID

SOAP to a bucket of water. Cleaning

can be applied by mops, brush or

dipping the soiled parts into a bath. It

is not recommended to use LIQUID

SOAP with washing machines, due to

high foaming properties.

NATURE OF RISKS AND SAFETY ADVICE



subjected to:


HAND CLEANER is gel skin cleaner

containing natural ingredients. It

removes the most severe industrial

grime, oil and grease on your hands.

HAND CLEANER is effective, mild to

the skin and contains no petroleum

solvent derivatives. It falls under the

cosmetic regulations and does not

need to have a Safety Data Sheet

DIRECTIONS FOR USE

HAND CLEANER should be massaged

onto the soiled skin without the use

of water. The skin should then be

rinsed with clean fresh water and

dried thoroughly with a towel or

tissue.

LIQUID SOAPGeneral purpose b i o d e g r a d a b l e cleaner

ź V e r y c o n c e n t r a t e d p r o d u c t , economical to use

ź Non-flammable

ź Pleasant odor

ź Cleans and leaves surfaces free of residues

ź Biodegradable, acceptable for use in food areas


A p p e a r a n c e :c l e a r l i q u i d ,

amber or green

C o r r o s i v e action: none on c e m e n t , asphalt, ceramic

t i l e s , v i n y l o r metal surfaces

pH 1% solution: 7 - 9

F l a s h p o i n t : none

I M O C l a s s : not regulated

U N N u m b e r : not regulated

ADR: n o t regulated











verification.

68

DESCRIPTION:

PET COKE REMOVEW

is a concentrated product, specially formulated to successfully remove pet coke from cargo and storage tanks. It contains special detergents and builders. It helps with cargo hold cleaning, by removing stains and discolouring after cargo discharge.

PET COKE REMOVEW

is water based and non-Flammable.

APPLICATION:

PET COKE REMOVEW

is mainly used in cargo and storage tanks but may also be used for the removal of mineral deposits in tanks and other closed systems. It can also be applied as a general purpose cleaner to eliminate bad odors in tanks and other closed systems.

PROPERTIES:

It is highly recommended to always test all cleaner solutions on a small area of tank coating, before full scale application.

STORAGE, HANDLING & DOSAGES

Instructions are based on experience and are meant only as a guide since circumstances for each tank cleaning operation vary. They are not intended to interfere with the judgment of the vessel’s responsible personnel.

Always try to preclean tanks with high pressure water, so as to remove large deposits and ensure an effective cleaning operation. Be sure that the surface has dried, before applying the chemicals, in order to avoid

unnecessary dilution of chemicals used.

PET COKE REMOVER may be used neat or diluted in water. Dose rates of PET COKE REMOVER vary depending on the

PET COKE REMOVER

Effective liquid

product for pet

coke removal


Colour: R e d

Liquid

Odor: Soft

Density at 20°C:

1.05 ± 0.05 g/cm˝

F l a s h P o i n t :

None

pH (undiluted):

12.5 ± 1.0

S o l u b i l i t y :

Soluble in water

C o m p a t i b i l i t y

(concentrated):











verification.

69

DESCRIPTION

PAINT REMOVER is a heavy duty, fast acting paint remover for the professional. Utilizing the power of methylene chloride, PAINT REMOVER will attack multiple layers of paint in a single application. PAINT REMOVER will remove most oil and latex paints, varnishes, shellacs, lacquers.

PAINT REMOVER is non-flammable and will not raise the grain of wood or corrode metals. This product does not require antievaporation paper like many caustics or other weaker solvent formulas.

SURFACE PREPARATION

Warning! If you scrape, sand, or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, ,

ESPECIALLY CHILDREN AND PREGNANT WOMEN SHOULD

ALSO AVOID EXPOSURE.

Wear a NIOSH approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPA vacuum. For indoor application, open all windows and doors or use other means to assure a constant supply of fresh moving air during use. Ideal working temperature is between 18°- 30°C. Avoid direct sunlight. Protect floor coverings and other areas not being stripped. Do not use on synthetic fabrics, plastic, linoleum, asphalt, foam products or rubber tile.

APPLICATION TOOLS

Apply PAINT REMOVER with brush or airless spray equipment. Brush: Synthetic, nylon or polyester bristle Spray: .017 to .021 tips

PRODUCT APPLICATION

1. Stir well before using. Open pail carefully to avoid splashing.

2. For best results, test a small area to determine the appropriate thickness, and duration of time required to most effectively remove the lead-based paint.

3. Brush on a thick layer in one direction for best results. Brushing

PAINT REMOVER

Product Specifications

Color: Clear /

Hazy

Odor: Pungent

Odor

F l a s h P o i n t :

>212º

pH: 7.0-9.0

S h e l f L i f e :

36 Months Min.

(Original Sealed

Container)

Coverage

Smooth Surfaces:

2.5m2/Lt.

Porous Surfaces:

1.25-2.5m2/Lt.

P e r f o r m a n c e

Activation Time:

5 - 1 5

minutes

Minimum Activation Temp: 5°C











verification.

70

AQUATUFF HIGH FOAM is a heavy duty alkaline cleaner with excellent foaming qualities specially formulated for cleaning cargo holds on bulk carriers.

Cargo Hold CleaningAQUATUFF HIGH FOAM is specially developed to clean vertical surfaces. When applied with the proper spray foam equipment, the dense foam created prolongs the contact time between the cleaning solution and the surface to be cleaned. It effectively removes most dry cargoes, sludge, soot, carbon deposits, fish meal etc., and is used for cargo hold cleaning when going from black to white cargo. AQUATUFF HIGH FOAM should not be used on zinc coatings.

Dosing and application methodApply AQUATUFF HIGH FOAM mixed 10--25% (ratio 1:9 to 1:3) in water, using spray foam equipment. Always apply the chemicals from bottom and upwards. Applying from top and down can result in lost cleaning effect or even staining. Leave for 30--45 minutes. The surface remains wet. Repeat the procedure if necessary. Always perform final rinse with fresh water after wash down to avoid salt residues on the surface.

When mixing AQUATUFF HIGH FOAM with seawater the following needs to be taken into account:Seawater may reduce the foaming qualities of the detergent. Seawater may influence the pH of the cleaning solution with a reduced cleaning effect as result. Seawater represents a corrosion risk to the surfaces and the equipment used.When mixing AQUATUFF HIGH FOAM with seawater it is recommend to have a concentration of at least 20 - 25% (ratio 2:9 to 1-3).

AQUATUFF HIGH FOAM

ź H e a v y D u t y

alkaline water

based cleaner

ź S p e c i a l l y

formulated for

the cleaning of

cargo holds

ź Does not contain

nonyl phenol

ethoxylates or

other estrogenic

compounds

ź Biodegradable

ź F r e e f r o m

h y d r o c a r b o n

solvents

ź Ideal for cleaning

after coal, pet

coke and other

difficult cargoes

ź Effective and

economical in

use

ź Completely safe

o n e p o x y

coatings

ź Complies with all

env ironmenta l

regulations and

the EU Detergent

Regulation











verification.

71

POTABLE WATER

TREATMENT

72











verification.

APPLICATIONSUsed to disinfect drinking water in aquaducts or on board ships and for desinfecting residual sewage water from waste water treatment. Also used for disinfecting swimming-pool and Jacuzzi-pool water.

ADVANTAGESControl and removal of bacterial flora ensured, thus meeting the essential requirements for drinking water. 12% SODIUM HYPOCHLORITE is universally recognized as a disinfectant for drinking water therefore its use is allowed in all civil water supply lines.

RECOMMENDED DOSAGE0,2 PPM of RESIDUAL ACTIVE CHLORINE as assessed by DPD method and tablets or ortho-tolidine should always be present in the ship or pipeline farthest point from place of application. Residual chlorine in drinking water tanks should range between 0,5 and 2 (maximum) PPM, to ensure wide range antibacterial protection. To obtain 2 PPM in a drinking water tank, put 20 cc of CHLOR 12 (corresponding to approximately 20 pump strokes of the proportioning pump) for every cubic meter of water. CHLOR 12 may either be proportioned manually with the proportioning pump or automatically upon water loading by means of a proportioning system featuring a pulse water-meter connected with a special proportioning pump. To obtain 20 cc per ton of CHLOR 12 (or 200 cc every 10 tons). A meter must be installed releasing one impulse every 50 lt. of water flowing inside the pipe. Alternatively, an oversized meter can be used (i.e. every 10 lt.). In this case the sodium hypochlorite solution must be diluted with water or the proportioning pump has to be set to have a pump stroke every 50 lt. Consult your Service Engineer for disinfecting swimming-pool and Jacuzzi-pool.


CHLOR 12

1 2 % S O D I U M

H Y P O C H L O R I T E

D e s i n f e c t a n t

activator

ź D e s i n f e c t s

drinking water

ź Controls and

r e m o v e s

bacterial flora

ź D e s i n f e c t s

residual sewage

water and waste

water systems



light yellow liquid,

ch l o r ine

odor


none

pH 1% solution:

11

I M O C l a s s :

8

U N N u m b e r :

1791

ADR: 8.61c)

73

STAINLESS STEEL

TREATMENTS

74











verification.

PICKLING LIQUID - APPLICATIONS &

DIRECTIONS FOR USE

PICKLING LIQUID is only suitable for

use on austenitic stainless steel.

The product is mainly used for

pickling stainless steel installations

and tanks.

The product may be used by

circulation, spraying and in

immersion baths. The surfaces to be

cleaned must be free of oil, grease

and ink marks.

CIRCULATION METHOD

This method is mainly used for

treatment of pipelines. The pipeline is

filled with undiluted PICKLING LIQUID

and circulated through pump and

tank loop arrangement. Treatment

time is between 2 to 6 hours


contamination. Do not pickle longer

than required. Drain the lines and

flush through thoroughly with

demineralised water. If passivation is

required, it should be carried out

immediately after with PASSIVATING

LIQUID. The treatment time is about 2

hours. Drain the lines and flush

through with demineralised water.

After drying the lines, test the

passivity of the steel with a Palladium

test set.

SPRAYING METHOD

This method is mainly used for

treatment of large surfaces such as

cargo and storage tanks. The product

is sprayed undiluted using suitable

tank washing machine. The treatment

procedure is the same as the

circulation method.

IMMERSION METHOD

This method is used mainly for

treatment of internal and external

surfaces at the same time. The

articles to be treated are immersed

into a plastic or plastic lined bath.

The treatment procedure is the same

as the circulation method.

TREATMENT OF EFFLUENT

Before disposing the treatment

PICKLING LIQUID

S p e c i a l l y

formulated for

austenitic stainless

steel treatment

ź Removes weld

slag, annealing

scale, grinding

dust and iron

particles

ź Fast pickling

reaction

ź Forms uniform

protective oxide

film

ź Sui tab le for

c l e a n i n g

aluminum



clear liquid

p H 1 %

solution: 1 - 2

D e n s i t y :

1,13 (20°C)


none

I M O C l a s s :

8 / II

U N N u m b e r :

1796

ADR: 8.3b)

75











verification.

PASSIVATING LIQUID is only suitable for use on austenitic stainless steel. The product is mainly used for pass ivat ing sta in less stee l installations and tanks.

DIRECTIONS FOR USEThe products may be used by circulation, spraying and in immersion bath. The surfaces to be cleaned must be free of oil, grease and ink marks.

CIRCULATION METHODThis method is mainly used for treatment of pipelines. The pipeline is filled with undiluted PICKLING LIQUID and circulated through pump and tank loop arrangement. Treatment time is between 2 to 6 hours depending on the degree of contamination. Do not pickle longer than required. Drain the lines and flush through thoroughly with demineralised water. Passivation should be carried out immediately after with PASSIVATING LIQUID. The treatment time is about 2 hours. Drain the lines and flush through with demineralised water. After drying the lines, test the passivity of the steel with a Palladium test set.

SPRAYING METHODThis method is mainly used for treatment of large surfaces such as cargo and storage tanks. The product is sprayed undiluted using suitable tank washing machine. The treatment procedure is the same as the circulation method.

IMMERSION METHODThis method is used mainly for treatment of internal and external surfaces at the same time. The articles to be treated are immersed into a plastic or plastic lined bath. The treatment procedure is the same as the circulation method.

CLEANING ALUMINUMFor cleaning aluminum, dilute PASSIVATING LIQUID 1:1 ratio with water. Cleaning time is approximate 2

PASSIVATING LIQUID

ź P a s s i v a t i n g

Liquid is based

on nitric acid

and non-ionic

surface active

substances?

ź The product

p r o v i d e s

a u s t e n i t i c

stainless steel

with a protective

oxide layer after

it has been

pick led . The

metal is then

passive?

ź P a s s i v a t i n g

Liquid, undiluted,

is suitable for

use only on

a u s t e n i t i c

stainless steel?


S p r a y i n g

: Undiluted

R e c i r c u l a t i o n :

Undiluted

I m m e r s i o n

: Undiluted

PROPERTIES

77

Paints

78

EPOXY PRODUCTS

79

FERODUR COATDESCRIPTION:It is an epoxy paint with two components (part A and part B). FERODUR COAT is a high quality product, excellent abrasion resistance, excellent spreading properties, good chemical and impact resistance, slight roughness and easy to clean.RECOMMENDED USES:Metal surfaces in shipping industry, oil refineries, chemical industry, power plants, warehouses, garages, hospitals etc.CHEMICAL RESISTANCE:Aliphatic & aromatic solvents, mineral oils, salt solution, acid & alkaline solutions, detergents, etc.Coverage area:5-6 m2/kg (A+B).Preceding coat: FERODUR PRIMERDilution: DILUACHROM T (10%-20%).Specific gravity:A = 1.53-1.60 g/cm3

B = 0.89-0.96 g/cm3Mixing ratio (by weight):A = 4; B = 1Application: brush, spiked roller, spray at temperature min. 13°C and humidity max 80%.Humidity: max. 80%.Pot life after mixing: 6-10 hours.Drying time (at 20-25°C): Surface (touch) dry: 8 hoursDry to over coat: 8-24 hoursDried/cured for service: 7 days.Storage Validity: 12 months

FERODUR PRIMERDESCRIPTION:It is a two component (part A and part B) polyamide cured epoxy primer. FERODUR PRIMER is used as general purpose primer in protective coating systems because insures protection from atmospheric exposure conditions, has good salt and corrosion resistance and very good chemical and impact resistance.RECOMMENDED USES:Primer in coating systems for a long term protection of metal surfaces such as ballast tanks, steel structures, dry cargo holds, decks, hulls, etc.

80

CHROMEPOXOL PRIMERDESCRIPTION:It is an epoxy primer with two components (part A and part B). It is a high quality product, self leveling, excellent abrasion resistance, good chemical and impact resistance, excellent spreading properties, slight roughness and easy to clean.RECOMMENDED USES:Primer in coating systems for a long term protection of concrete surfaces. For new and old concrete elements subject to heavy loads, heavy wear, weather exposure, chemicals. Ideal for use in chemical storage areas, oil refineries, chemical industries, laundry houses, swimming pools, warehouses, garages, abattoirs, hospitals etc.CHEMICAL RESISTANCE:Aliphatic & aromatic solvents, mineral oils, salt solution, acid & alkaline solutions, detergents, etc.Coverage area: 7 - 9 m2/kg (A+B).Color: red oxide, gray.Dilution: DILUACHROM T max. 10%.Specific gravity: A = 1.00-1.06 g/cm3B = 0.85-0.91 g/cm3Mixing ratio (by weight): A = 1; B = 1Introduction period: 15 minutes.Application: brush, roller, spray at temperature min. 13°C and humidity max 80%.Pot life after mixing: 6 -10 hours.Drying time (at 20-25°C): Surface (touch) dry: 8 hoursDry to over coat with CHROMEPOXOL: 6-24 hoursDried/cured for service: 7 days.Storage validity: 12 months

CHROMEPOXOL COATDESCRIPTION:It is an epoxy paint with two components (part A and part B). CHROMEPOXOL COAT has superior abrasion resistance, good chemical and impact resistance, excellent spreading properties, and is easy to clean and maintain.RECOMMENDED USES:Concrete surfaces in industrial buildings, power plants, oil industry, hospitals, construction sites.CHEMICAL RESISTANCE:Aliphatic & aromatic solvents, mineral oils, salt solution, acid & alkaline solutions, detergents, etc.Coverage area: 5-6 m2/kg (A+B).Primer: CHROMEPOXOL PRIMERDilution: DILUACHROM T (10%-20%).Specific gravity: A = 1.53-1.60 g/cm3

81

DURO FLOOR PRIMERDESCRIPTION:IIt is an epoxy primer with two components (part A and part B). DURO FLOOR PRIMER is a high quality product, with excellent abrasion resistance and spreading properties, good chemical and impact resistance, slight roughness and easy to clean.RECOMMENDED USES:Primer in coating systems for a long term protection of subject to mechanical or chemical aggression, heavy loads, weather factors, etc. Ideal for use on high traffic surfaces in public institutions, schools, industrial warehouses, factories, hospitals, chemical storage areas, oil refineries, chemical industries, laundry houses, swimming pools, warehouses, garages, abattoirs, hospitals etc.CHEMICAL RESISTANCE:Aliphatic & aromatic solvents, mineral oils, salt solution, acid & alkaline solutions, detergents, etc.Coverage area: 5 - 6 m2/kg (A+B).Dilution: DILUACHROM T at a rate of 10%-20%.Specific gravity: A = 1.53-1.60 g/cm3B = 0.89-0.96 g/cm3Mixing ratio (by weight): A = 4; B = 1Application: brush, spiked roller, spray at temperature min. 13°C and humidity max 80%.Pot life after mixing: 6 -10 hours.Drying time (at 20-25°C): Surface (touch) dry: 8 hoursDry to over coat with DURO FLOOR COAT: 6-24 hoursDried/cured for service: 7 days.Storage validity: 12 months

DURO FLOOR COATDESCRIPTION:It is an epoxy paint with two components (part A and part B). DURO FLOOR COAT is a high quality product, with excellent abrasion resistance and spreading properties, good chemical and impact resistance, slight roughness and easy to clean.RECOMMENDED USES:Protection of concrete floors subject to mechanical or chemical aggression, heavy loads, heavy traffic, weather factors, etc. Ideal for use on high traffic surfaces in public institutions, schools, industrial warehouses, factories, hospitals, chemical storage areas, oil refineries, chemical industries, laundry houses, swimming pools, warehouses, garages, abattoirs, hospitals etc.CHEMICAL RESISTANCE:Aliphatic & aromatic solvents, mineral oils, salt solution, acid & alkaline solutions, detergents, etc.Coverage area: 5 - 6 m2/kg (A+B).

82

HEAT-RESISTANT COAT

83

HEAT RESISTANCE 200

&

HEAT RESISTANCE 500

DESCRIPTION:

HEAT RESISTANCE 200 and 500 are paints based on silicon

resins with aluminum pigment, good heat resistance up to

200°C, respectively 500°C.

HEAT RESISTANCE 200 and 500 have an extensive range of

applications for elements exposed to rough atmospheric

conditions and high temperature in factories, engines,

machines, etc.

RECOMMENDED USES:

any parts, components, systems, structures exposed to high

temperatures for a long period.

APPLICATION DATA:

Apply only on dry and free from any contamination surfaces.

In order to clean the surface we strongly advice to use

DEGREASER HD, as any dirt / grease on the surface will

negatively affect the heat protection properties of the paint.

Application: brush, roller.

spray application improves the appearance.

Coverage area: 5-8 m2/ Lt.

Dilution: DILUACHROM T at 5-10%.

Specific gravity:1.0 g/cm3

Over-coating interval: minimum 24 hours at 20°C.

Storage validity: 12 months

84

NAVAL PAINTS

85

CHROMVINYL PRIMER

DESCRIPTION:

A one component vinyl anticorrosive primer. It contains no

tar and can be used as a primer under vinyl, chlorinated

rubber and alkyd coatings for metalic structures, both above

and bellow the waterline. It is recomanded to be used in

conjunction with ANTIFOULING LONG LIFE.

SURFACE PREPARATION: .

1. Remove oil, grease etc. by ,,Degresant HD”.

2. Fresh water wash to remove all dirt and salt

contamination.

3. Clean, dry any undamaged plastprimer or blast

cleaning to Sa 2 ½ Swedish standards SIS 0559900.

APPLICATION DATA:

Airless spray, brush or roller may be used for smaller areas.

Thinner may be necessary 5% - 10%.

THINNER: DILUACHROM T/M

RECOMMENDED NUMBER OF COATS : Two (2) x 80 µm

SAFETY PRECAUTIONS:

A.Take precaution to avoid skin and eye contact

(gloves, face mask etc)

B. Provide adequate ventilation.

C. Keep away from sparks and open flames. No

smoking should be permitted in the area.

SPECIFIC GRAVITY: 1.5 – 1.7

VISCOSITY: BROOKFIELD 1900-2300 CP at 25°C

SOLIDS: 59 %

FILM THICKNESS PER COAT: Dry: 35 - 100 m Typical 80 m

Wet :95 – 260 m Typical 210 m

THEORETICAL SPREADING RATE: 4-10 m2/lt

DILUTION: DILUACHROM T/M - 10% - 15%

CHARACTERISTICS:

Drying time: STAS 2875-75

Droping: STAS 2096-68

Storage Validity: 12 months

86

ANTIFOULING LONG LIFE

(SELF-POLISHING)

DESCRIPTION:

Tin free self-polishing antifouling based on a vinyl copolymer

binder. To be used on vessels operating area in global

services.

SURFACE PREPARATION:

Use controlled close high pressure fresh water washing to

clean the entire area. The total area should be free of all

contamination (oil, grease, salt). Recommended DEGREASER

HD. Repair corroded areas with CHROMVINYL PRIMER.

APPLICATION DATA:

Airless spray. Thinner may be necessary (5% - 10% by

volume). Use DILUACHROM T/M VINYL.

Recommended number of coats: Two (2) x 75 µm.

SAFETY PRECAUTIONS:

a. Avoid contact with skin and eyes.

b. Provide adequate ventilation.

c. Keep away from sparks and open flames. No smoking

should be permitted in the area.

d. If the product comes in contact with skin or eyes

flush with plenty of water and obtain medical assistance.

SPECIFIC GRAVITY: 1.8 – 1.9

VISCOSITY: BROOKFIELD 1800-220 CP at 250 C

SOLIDS: 62%

FILM THICKNESS PER COAT: Dry 75 m - 150 m

Wet 150m - 300 m

THEORETICAL SPREADING RATE: 4 – 6.5 m2 / Lt.

DILUTION: 5% - 10%

CHARACTERISTICS: Drying time STAS 2875-75

Droping STAS 2096-68

STORAGE VALIDITY: 12 months

87

MARICOAT SUPERIOR

ALKYD PAINT

88

MARICOAT PRIMER

DESCRIPTION:High quality alkyd primer suitable for wood, concrete\brick, metal surfaces, to be used as undercoat for MARICOAT PAINT. Also has anti-corrosive properties.COLORS: red, gray.SURFACE PREPARATION:Before using, remove oil, grease, rust, old paint and blast clean of dust and dirt. Use Degrease HD for the cleaning phase.APPLICATION METHOD:ź Mix well in its own recipient and dilute it with DILUACHROM at a rate of 10% when spraying, and 10 – 15% when applied by brush or roller.

ź To be applied in two coats at a 6 hrs. distance on 15°C – 30°C temperature.

ź SPREADING RATE : 12 – 14 m2/kg. STAS 2043-73ź SAFETY PRECAUTIONS:ź Deposit: At a temperature of under 30°C, in drums well sealed, in covered and airy spaces, kept out of fire sources and excessive heat .

ź First aid measures: In contact with eyes, rinse immediately with plenty of water and seek medical advice if the symptoms persist.

ź CHARACTERISTICS:ź Appearance: red, gray.ź Drying time: 6 hours at temp. above 15 Cź STORAGE VALIDITY: 18 months

MARICOAT PAINT

DESCRIPTION:It is hight qualityl Alkyd paint for any surface (wood, metal, brick walls, plastic, glass, etc). MARICOAT has superior adhesion and gloss compared to a regular alkyd paint.COLORS: deck red, white, blue, red, orange, green, yellow, bronze aluminum.SURFACE PREPARATION:ź The total area must be completely free of all contamination (oil, grease, dirt). For cleaning the surface we recommend DEGREASER HD.

ź A primer coat of MARICOAT PRIMER is required prior to painting with MARICOAT PAINT.

APPLICATION METHOD:ź Mix well in its own recipient and dilute it with DILUACHROM at a rate of 10% when spraying, and 10 – 15% when applied

89

THINNERS

90

DILUACHROM

DESCRIPTION:It is a mixture of solvents (aliphatic and aromatic hydrocarbons) made for the dilution of varnishes, primers, air drying alkyd paints, in order to give products an adequate viscosity for application. It is also used in cleaning the painting tools.DILUTION:This product is recommended to be diluted at a rate of 10-15%. SAFETY PRECAUTIONS:ź This product must be kept in covered and ventilated spaces, out of excessive heat and away from the sun rays.

ź No smoking should be allowed while handling the product.ź Keep away from sparks and open flames.ź It must be used in a proper ventilated room using rubber gloves.

ź In contact with skin wash with water and soap; in contact with eyes wash with fresh water at least 10 minutes then seek medical advise; In case of swallowing do not induce vomiting, but seek for medical advise.

STORAGE VALIDITY: 24 months.

DILUACHROM T

DESCRIPTION:It is a mixture of solvents (aliphatic and aromatic hydrocarbons) formulated to give EPOXY COATINGS an adequate viscosity for application.DILUTION: It is recommended a rate dilution of maximum 20%.SAFETY PRECAUTIONS:ź This product must be kept in covered and ventilated spaces, out of excessive heat and out of the direct action of the sun rays.

ź No smoking should be allowed while handling the product. ź Keep away from sparks and open flames.ź It must be used in airy rooms using rubber gloves.ź In contact with skin wash with water and soap; in contact with eyes wash with fresh water at least 10 minutes then seek medical advise; In case of swallowing do not induce vomiting, but seek medical advise.

STORAGE VALIDITY: 24 months.

DILUACHROM T-M

DESCRIPTION:It is a mixture of aliphatic and aromatic hydrocarbons rich in

91

GENERAL PRIMERS

92

CHROMAPRIM

DESCRIPTION:

Alkyd primer suitable for wood, concrete\brick, metal surfaces. It has anti-corrosive properties.


Before using, remove oil, grease, rust, old paint and blast clean of dust and dirt.

APPLICATION DATA:

It is applied by brush or airless spray in one-two coats. The second coat is applied only after complete drying of the first one.

SPREADING RATE: 9 -11 m2/kg.

DRYING TIME: minimum 24 hours at 200C.

DILUTION: The product can be diluted with DILUACHROM at a rate of 20%.

SAFETY PRECAUTIONS:

a. Being flammable covered spaces are required for deposit, kept away from sparks and open flames and excessive heat.

b. To be delivered in covered means of transport.

c. No smoking should be permitted in the area while handling the product.

CHARACTERISTICS:

Appearance: red, gray, black, yellow color

Aspect: STAS 4121-75

STORAGE VALIDITY: 18 months

CHROMAPRIM Ultra Fast Dry

DESCRIPTION:

IFast drying formulated Alkyd primer suitable for wood, concrete\brick, metal surfaces. It has anti-corrosive properties.


Before using, remove oil, grease, rust, old paint and blast clean of dust and dirt.

APPLICATION DATA:

It is applied by brush or airless spray in one-two coats. The second coat is applied only after complete drying of the first one.

SPREADING RATE: 9 -11 m2/kg.

DRYING TIME: aprox 5-10 minutes at 20C

DILUTION: The product can be diluted with DILUACHROM at a rate of 20%.

SAFETY PRECAUTIONS:

a. Being flammable covered spaces are required for deposit, kept away from sparks and open

flames and excessive heat.

93

FINISHING FOR EXTERIOR /

INTERIOR

94

CHROMEMAL

DESCRIPTION: It is an general Alkyd paint for any surface (wood, metal, brick walls, plastic, glass, etc).

SURFACE PREPARATION: ź The total area must be completely free of all contamination (oil, grease, dirt). For cleaning the surface we recommend DEGREASER HD.

ź A primer coat of CHROMAPRIM is required prior to painting with CHROMEMAL.

PREPARATION METHOD: ź Mix well in its own recipient and dilute it with DILUACHROM at a rate of 20 -25% when spraying, and 10 – 15% when applied by brush or roller.

ź To be applied in two coats at a 6 hrs. distance on 15°C – 30°C temperature.

SPREADING RATE : 12 – 14 m2/kg. STAS 2043-73

SAFETY PRECAUTIONS: Deposit: At a temperature of under 30°C, in drums well sealed, in covered and airy spaces, kept out of fire sources and excessive heat . First aid measures: In contact with eyes, rinse immediately with plenty of water and seek medical advice if the symptoms persist.

CHARACTERISTICS: Appearance: all colors Drying time: STAS 2875-75 STORAGE VALIDITY: 18 months

CHROMLAVAB

DESCRIPTION:CHROMLAVAB WHITE is an acrylic paint for interior and exterior use, suitable to marine / high humidity environments. It is based on vinyl-acrylic copolymer and styren to confer the product a high resistance on concrete, cemented, brick, etc. Due to its properties, walls can breathe, avoiding the danger of humidity and mold. COLOR: white.

RECOMMENDED USES: concrete, cement, exposed building elements.

APPLICATION DATA: ź To be applied on clean dry, straight and polished surfaces. ź By brush, roller or air pump; two coats are recommended.

95

NANOPORE DESCRIPTION: NANOPORE is a nanotechnology based impregnation product that gives the surfaces treated with strong hydrophobic (water repellent) properties. The product is water-based, solvent-free and therefore eco-friendly. APPLICATIONS NANOPORE is ideal for the preservation of buildings, historical monuments, pavements of any kind, and exposed construction surfaces in general, preventing the development of algae, molds, efflorescence; also protects surfaces from external pollutants (smog, dust, etc.), giving them a very good resistance. Also, due to its transparency it does not change the natural appearance of the surface. It can be applied on both horizontal and vertical surfaces. Because forms an excellent barrier, surfaces treated with NANOPORE can be easily cleaned by any kind of stains (oil, wine, coffee, ketchup, etc.).

NANOPORE can be used with very good results for impregnation of: ź Concrete surfaces & foundations ź Porous sandstone or marble facade and walls ź Pavements and concrete strips ź Plastered facades ź Bricks, roof tiles, terracotta ź Prefabricated concrete street poles and sewerage tubes

NANOPORE advantages: Strong waterproofing properties, penetrating a few mm in the layers of the protected material Anti-adherent properties Easy-to-clean of treated surfaces Pressure washer resistant (50 bar) Resistant to solvents and stable to UV rays Does not color or change the appearance of the treated surfaces Excellent efficiency with low substance consumption Perfectly resistant both to very high temperatures and to frost

DIRECTIONS FOR USE 1. Surfaces must be dry and cleaned of materials / dirt that could prevent adhesion (grease, salts, algae, molds, etc.). Apply with brush or spray. On highly absorbent surfaces we recommend applying a second layer after the first layer has been absorbed by the surface. 2. Do not dilute. The products it's ready for application. 3. Do not apply on wet surfaces. Do not apply under rain, windy conditions, or direct sun rays. 4. Application temperature for surfaces and air must be between min. +5ºC and max. + 30°C. 5. After use, the tools are washed with water. Observation: Phase separations may occur during storage, therefore the product should be shaken before use.

CONSUMPTION Consumption is approx. 200-400 ml / m2 / layer; depending on the porosity and the absorption capacity of the surface this consumption may vary.

DRYING TIME 5 -6 hours at + 20ºC and relative humidity 65%. Increased air humidity and lower temperatures can prolong drying time.

PRODUCT CHARACTERISTICS Appearance: clear liquid Density: 1 +/-0,05 g/ml pH: 4-6 PACKING: Containers: 3Lt. and 10Lt. STORAGE: Cold and frost-free places. WARRANTY: 36 months in sealed packaging.

PRECAUTIONS S2 Keep out of the reach of children.

96

CHROMEMAL AQUA

DESCRIPTION: Acrylic Paint for wood and metal surfaces. It does not contain synthetic solvents. It dries quickly and forms adherent films with excellent coating strength and superior gloss qualities. It does not suffer yellowing effects with the passing of time.

USE: The product is especially recommended for finishing wood and metal surfaces, both indoors and outdoors. It can also be used for repainting older surfaces that were originally covered with solvent based coatings. The product can be colored with COLOR SYSTEM in 1000 different colors, based on clients requests.

SURFACE PREPARATION: Application of the product to the support surface is only made after a correct preparation, due to the fact that this stage has a decisive influence on the quality of the coverage and its durability. New wood surfaces -sanding along the fiber with abrasive paper with granulation at least 150, then degrease with GENERAL CLEANER, and fix the surface defects with repairing paste and prime. New metallic surfaces -Remove eventual rust, degrease with DEGREASER HD / DEGREASER ECO / GENERAL CLEANER and then priming with anticorrosive MARICOAT PRIMER. Old and / or painted surfaces -remove the old coating lairs to the support surface, and then treated as new any surfaces.

APPLICATION CONDITIONS: Thinner: water Dilution: 5-10% for brush or roller and 10-15% for air spray gun. Homogenize before use. Drying Time: Surface (touch) dry: 1 hour at 20°C Dry to over coat: 4 hours at 20°C Dried/cured for service: 24 hours. Product temperature: 10-30°C Surface temperature: 10-30°C Surface moisture: 1-12% Average humidity: 20-80% Spreading Rate : 12 – 14 m2/kg

ATTENTION! Do not apply the product if there is a risk of rain, both during and after application. Failure to observe application instructions can alter appearance and quality coverage. Clean tools with water immediately after use.

PRODUCT CHARACTERISTICS Appearance: clear liquid, no sediments Color: white

98

14 PAPADOPOL ST., CONSTANTA CITY, ROMANIA

www.costheva.com

COSTHEVA SRL

15 cdrw catalog prezentare 2018 - costheva.com · 8 for 2019 we are extending our products range...

Documents