Sheet1Execution Plan: Fuel Duct Installation ProjectSr.No.Execution PlanResponsibilityHoursDay 1Day 2Day 3Day 4Day 5Day 6Remarks1Getting the work permit from Client every dayETW12Area Barrication.ETW23Providing the Scaffolding material and scaffolderAAC / ClientRequired ready on Day 14Removing the instruments connectionsAAC / ClientRequired ready on Day 15Removal of InsulationETW66De-torduing of lower flange and upper flangeETW37Wood arrangement for lifting the duct assembly on the ground.AAC / ClientRequired ready on Day 18Holding duct assembly using crane for proper de-bolting of flanges.ETW69Lifting of fuel duct assembly and placement on the wood on ground.ETW610Removal of central flange.ETW611Cleaning of all flanges for inspection.ETW612Inspection of all the flanges with gaskets and bolts & Overall inspection.AAC / Client13After inspection clearance, installtion of new feul duct lower spool using crane.ETW614Fuel duct assembly erection, installation and re-fitting both flanges simultaneously.ETW815Allignment inspection for fuel duct.AAC / Client & ETW5Simultaneous operation.16Torquing of flange's nut bolts.ETW517Inspection of bolt torquing.AAC / Client218Fuel duct re-insulation.ETW1019Weather shield installation.ETW620Box up and house keeping.ETW6