1350 oms eml r9.6 o&m tos63017_student guide

8/13/2019 1350 Oms Eml r9.6 o&m Tos63017_student Guide

http://slidepdf.com/reader/full/1350-oms-eml-r96-om-tos63017student-guide 1/846

Copyright © 2012 Alcatel-Lucent. All Rights Reserved.

COPYR!"# © ALCA#$L-L%C$&# ''Y$AR. ALL R!"#( R$($R)$*.

1350 OMS EMLR9.6 Operation and MaintenanceStudent Guide#O(+,01),.1-(!-R/.+-$dition 1

Passing on and copying o this docuent use and counication o itscontents not peritted 3ithout 3ritten authori4ation ro Alcatel-Lucent




@@COURSENAME@@PRODUCT

2COPYR!"# © ALCA#$L-L%C$&# 2012. ALL R!"#( R$($R)$*.

#ers o use and legal notices

Switch to notes view!TERMS OF USE AN LEGAL NOT!"E

Alcatel-Lucent provides this training course to you su56ect to these #ers o %se and Legal &otice. Your use o this trainingcourse and7or this site constitutes your acceptance o and agreeent to these #ers o %se and Legal &otice. #hese #ers

o %se and Legal &otice as 3ell as the contents o this training course ay 5e updated or aended 5y Alcatel-Lucent rotie to tie 3ithout prior notice to you. Your use o the Alcatel-Lucent training aterials ater such update or aendentconstitutes your acceptance o and agreeent to said updated or aended #ers o %se and Legal &otice.

SAFET# $ARN!NG

Alcatel-Lucent training aterials can 5e or products or reer to products that have 5oth lethal and dangerous voltagespresent. Al3ays o5serve all saety precautions and do not 3or8 on the e9uipent alone. #he user is strongly advised not to3ear conductive 6e3elry 3hile 3or8ing on the products. $9uipent reerred to or used during this course ay 5eelectrostatic sensitive. Please o5serve correct anti-static precautions.

%ERM!SS!ON TO USE "ONTENT

#he inoration counications scripts photos te:t video graphics usic sounds iages and other aterials providedin this training course ;collectively the <Content<= is intended or the la3ul use o eployees o Alcatel-Lucent and otherauthori4ed participants in this Alcatel-Lucent training course. You are here5y granted a non-e:clusive non-transera5leperission to access and use the Content solely or your personal training and non-coercial use. #his perission ay 5eterinated 5y Alcatel-Lucent at any tie or any reason or no reason 3ith or 3ithout notice. You ust iediately ceaseuse o the Content upon such terination.

"O%#R!G&TS AN TRAEMAR'S

#he unauthori4ed copying displaying or other use o any Content ro this training course is a violation o the la3 and Alcatel-Lucent>s corporate policies. #he Content is protected in ?rance the %.(. and other countries 5y a variety o la3sincluding 5ut not liited to copyright la3s and treaty provisions tradear8 la3s patent la3s and other proprietary rightsla3s ;collectively <P Rights<=. n addition to Alcatel-Lucent>s P Rights in the Content in part and in 3hole Alcatel-Lucentand any o the third parties 3ho have licensed and7or contri5uted to the Content o3ns a copyright in the oratting andpresentation o the Content.

Alcatel-Lucent does not grant you any perission to use the Content other than the perission e:pressly stated in these#ers o %se and Legal &otice. All other use o Content ro this training course including 5ut not liited to odiicationpu5lication transission participation in the transer or sale o copying reproduction repu5lishing creation o derivative3or8s ro distri5ution perorance display incorporation into another training course or presentation or in any other 3aye:ploiting any o the Content in 3hole or in part or uses other than those e:pressly peritted herein is strictly prohi5itedand shall not 5e ade 3ithout Alcatel-Lucent>s prior 3ritten consent. All characters appearing in this training course areictitious. Any rese5lance to real persons living or dead is purely coincidental.

#here ay 5e a nu5er o proprietary logos ar8s tradear8s slogans and product designations ound in theContent. Alcatel Lucent Alcatel-Lucent and the Alcatel-Lucent logos are tradear8s o Alcatel-Lucent. All other tradear8s

are the property o their respective o3ners. Alcatel-Lucent does not grant you a license to use any o the oregoing logosar8s tradear8s slogans and product designations in any ashion. !ranting o the right to access and use the Content ortraining purposes does not coner upon you any license under any o Alcatel-Lucent>s or any third party@s P Rights.

!S"LA!MER

ALCA#$L-L%C$&# *(CLA( ALL BARRA&#$( R$!AR*&! #"$ #RA&&! CO%R($( OR #"$ CO&#$&# $PR$(( ORPL$* &CL%*&! B#"O%# L#A#O& #"$ PL$* BARRA&#$( O? $RC"A&#ADL#Y OR ?#&$(( ?OR APAR#C%LAR P%RPO($. #"$ ALCA#$L-L%C$&# BLL &O# D$ R$(PO&(DL$ OR LADL$ ?OR A&Y &E%RY LO(( CLA*AA!$ OR A&Y (P$CAL $$PLARY P%&#)$ &*R$C# &C*$&#AL OR CO&($F%$&#AL *AA!$( O? A&Y G&*;&CL%*&! B#"O%# L#A#O& LO(( PRO?#( OR LO(( (A)&!(= B"$#"$R DA($* & CO&#RAC# #OR# (#RC#LADL#Y OR O#"$RB($ #"A# AR($( O%# O? OR ( & A&Y BAY CO&&$C#$* B#" ;A= A&Y %($ OR (%($ O? #"$CO&#$&# OR #"$ #RA&&! CO%R($( DY YO% OR ;D= A&Y ?AL%R$ OR *$LAY DY ALCA#$L-L%C$&# #( O??C$R(*R$C#OR( A!$&#( OR $PLOY$$( & CO&&$C#O& B#" #"$ CO&#$&# OR #"$ #RA&&! CO%R($( ;&CL%*&!B#"O%# L#A#O& #"$ %($ O? OR &ADL#Y #O %($ A&Y COPO&$&# O? #"$ CO&#$&# OR #RA&&! DY YO%=. (O$ E%R(*C#O&( L# OR PRO"D# (%C" $CL%(O& O? BARRA&#$( OR L#A#O& O? LADL#$( A&* (O #"$ ?OR$!O&! $CL%(O& O? BARRA&#$( OR L#A#O& O? LADL#Y AY &O# APPLY #O YO%.

GO(ERN!NG LA$

#hese #ers o %se and Legal &otice are governed 5y the la3s o ?rance. #he operation and use o the training course isgoverned 5y the la3s o the country that governs your eployent contract i applica5le. any provision o these #ers o%se and Legal &otice or the application thereto to a person or circustance is held invalid or unenorcea5le 5y la3 statuteor a court o copetent 6urisdiction or any reason then such provision shall 5e odiied and7or superseded 5y a provisionthat relects the intent o the original provision as closely as possi5le. All other provisions o these #ers o %se and Legal&otice shall reain in ull orce and eect. You ay not assign these #ers o %se or any perission granted hereunder3ithout Alcatel-Lucent>s prior 3ritten consent. &othing herein shall 5e deeed an eployent agreeent or an oer oeployent or an alteration in any 3ay o a user>s ters o eployent 3ith or 3ithin Alcatel-Lucent.

Copyright © 2011 Alcatel-Lucent. All Rights Reserved






Course outline

4. Topic/Section is Positioned Here




1. Product Overview

1. 1350 OMS Overview

2. Gr!"ic# $%ter&ce

1. 'e( Port#

2. Mu#ti Service GU$

3. S)*te+ O!ertio%

1. NE Cretio% %d Su!ervi*io%

2. M!* %d Su(,%etwor-*

3. P")*ic# co%%ectio%*

. Co++i**io%i%/ %d Power #%ci%/ &or 130 PSS

5. NE M%/e+e%t. 3 NE *i+u#tor %d NE M$ (c-u! %d re*tore

. Mi%te%%ce A!!#ictio%*

1. A#r+ +%/e+e%t

2. Per&or+%ce Mo%itori%/ +%/e+e%t

3. 4o/* +%/e+e%t

. NE *o&twre dow%#od

$e)co*e to 1350 OMS EML

R9.6 Operation and Maintenance

1. Product Overvie3

1. 1,H0 O( Overvie3

2. !raphical nterace

1. Be5 Portal

2. ulti (ervice !%

,. (yste Operation

1. &$ Creation and (upervision

2. aps and (u5-net3or8s

,. Physical connectionsI. Coissioning and Po3er Dalancing or 1J,0 P((

H. &$ anageent

+. F, &$ siulator and &$ D 5ac8up and restore

I. aintenance Applications

1. Alar anageent

2. Perorance onitoring anageent

,. Logs anageent

I. &$ sot3are do3nload






Course o56ectives

%pon copletion o this course you should 5e a5le toK

descri5e the 1,H0 O( unctions and architecture login and start 3ith the 1,H0 O( navigate the !raphical %ser nteraces create in the syste data5ase the &$s deployed in the net3or8 conigure the paraeters re9uired or supervising the &$s create and anage the net3or8 ap create in the syste the physical connections that represent the net3or8 ca5ling peror the ain provisioning and coissioning procedures or 1J,0 P(( net3or8s use the siulator or o-line coniguration o F,-O( &$s peror the 5ac8up restore o the &$ data5ase peror a set o &$ anageent operations do3nload into the &$ a ne3 sot3are pac8age to update its sot3are release 5ro3se the operation log handle the Alar (urveillance application or onitoring the current and the historical

alars anage the transission 9uality records.

1350 OMS EML

R9.6 Operation and Maintenance

%pon copletion o this course you should 5e a5le toK

descri5e the 1,H0 O( unctions and architecture

login and start 3ith the 1,H0 O(

navigate the !raphical %ser nteraces

create in the syste data5ase the &$s deployed in the net3or8

conigure the paraeters re9uired or supervising the &$s

create and anage the net3or8 ap

create in the syste the physical connections that represent the net3or8 ca5ling

peror the ain provisioning and coissioning procedures or 1J,0 P(( net3or8s

use the siulator or o-line coniguration o F,-O( &$s

peror the 5ac8up restore o the &$ data5ase

peror a set o &$ anageent operations

do3nload into the &$ a ne3 sot3are pac8age to update its sot3are release

5ro3se the operation log

handle the Alar (urveillance application or onitoring the current and the historical alars

anage the transission 9uality records.

our &eed(c- i* !!recited6

P#e*e &ee# &ree to E+i# )our co++e%t* to7

tri%i%/.&eed(c-@#cte#,#uce%t.co+

P#e*e i%c#ude t"e &o##owi%/ tri%i%/ re&ere%ce i% )our e+i#7

TOS30189:3.1,SG Editio% 1

T"%- )ou6



Copyright © 2012 Alcatel-Lucent. All Rights Reserved.TOS!01"#$!.1-S%-R&.-'d1 (odule 1.1 'dition 1

))S'C

Do not delete this graphic elements in here:

All Rights Reserved ©Al catel-Lucent @@YEAR

(odule 11!,0 O(S Overvie

TOS!01"#$!.1-S%-R&.-'d1 (odule 1.1 'dition 1

Section 1roduct Overvie

1!,0 O(S '(L

R&. Operation and (aintenance

TOS!01"#$!.1-S% 'dition 1

Section 1 / (odule 1 / age 1




1!,0 O(S '(L / R&. Operation and (aintenanceroduct Overvie / 1!,0 O(S Overvie

1 · 1 · 2COR*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

4lan5 page

This page is le6t 7lan5 intentionally

3ocu8ent istory

'dition 3ate Author Re8ar5s

01 2012-11-10 $allet9 Carole :irst edition







(odule o7;ectives

pon co8pletion o6 this 8odule9 you should 7e a7le to<

3etail the set o6 1!,0 O(S=s applications and their interor5ing

*llustrate the 1!,0 O(S '(L=s purposes

3escri7e ho 1!,0 O(S '(L interacts ith the +etor5 'le8ents

Section 1 / (odule 1 / age !

1350 OMS13 - Rep software50 - rep 3rd genO - OpticalM - management

S- system

EML - Element management layer

EML - Divided into IM andUSM

IM - Information Management

USM - User Services Management






(odule o7;ectives >cont.?


Section 1 / (odule 1 / age @






Ta7le o6 contents

S-itch to notes vie-A age

1 1350 OMS Product and its Applications "2 EML Management Functions 1,3 EML Arcitecture 2!

Section 1 / (odule 1 / age ,





1 · 1 · !COR*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

Ta7le o6 contents >cont.?

S-itch to notes vie-A


Section 1 / (odule 1 / age





1 · 1 · "COR*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1 1!,0 O(S roduct and its Applications

Section 1 / (odule 1 / age "





1 · 1 · #COR*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


T(+ description

A Teleco88unication (anage8ent +etor5 BT(+ is a structured netor56eaturing 8anage8ent 6unctions 6or a Teleco88unication +etor5 BT+.

The T(+ is structured in layers '(L< 'le8ent (anage8ent Layer

To 8anage the netor5 ele8ent con6iguration9 alar8s and per6or8ance

+(L< +etor5 (anage8ent Layer To 8anage netor5 connectivity9 routing and protections in various topologies and

across di66erent regions

S(L< Service (anage8ent Layer To 8anage services o66ered to the custo8er< order handling9 service handling9 7illing9

service develop8ent9 planning

4(L< 4usiness (anage8ent Layer

To 8anage the overall sales activity< e.g. return on invest8ent9 syste8 decisionsupport9 8ar5et analysis

Section 1 / (odule 1 / age D





1 · 1 · $COR*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Applications and Co88on Co8ponents

1350 OMS P%&

1350 OMSeOMS

1350 OMS '(M

)*+ ,maps

Login andSecurit-

Per.ormanceMonitoring

+etor5

1350 OMS/ardarePlat.orm

ra.t

&erminal

1350 OMS S(/ 135 0OMS SOE&

1350 OMS EML

MLla-er

EMLla-er

FaultManagement

The 1!,0 O(S 6ocuses on the T(+=s 'le8ent (anage8ent and +etor5 (anage8ent layers.

These 8anage8ent layers 6unctions are acco8plished 7y a set o6 di66erent applications .

The 'le8ent (anage8ent Layer is i8ple8ented 7y the 1350 OMSEML application.

The +etor5 (anage8ent Layer is i8ple8ented 7y the 1350 OMSS(/9 1350 OMSP%&6 1350 OMSSOE&6 and 1350 OMS'(M applications.

Co88on 6unctionalities are 7undled into co8ponents that are shared 7y the applications.

4y 8eans o6 a uniEue login9 the user is granted the access to the applications according to the securitysettings.

The co88ands o6 all the applications are availa7le in the sa8e %raphical ser *nter6ace that provides auniEue 8ap9 too.

:ault 8anage8ent and er6or8ance (onitoring in6or8ation is co88on to all the applications. The user canretrieve the data collected 7y a single application9 too. 'very application renders the alar8s and the (results according to the on 8anage8ent.

Cra6t Ter8inal is 8eant 6or co88issioning and 6or 8aintenance hen the +etor5 'le8ent is not reacha7le6ro8 1!,0 O(S.

Section 1 / (odule 1 / age &





1 ·1 ·10COR*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Applications= purposes

Legac- Lucentetor7

Legac- Lucentetor7

Element

Mng

1350 OMS P%&

1350 OMS S(/1350 OMS SOE&

'(M

&(M

(ata'thernet9(LS9 C'S

1350 OMS EML

1350 OMS '(M

1D,0TSS9 &,00(R9 *SA-'S

1D,0TSS9 O(S+

12L(1D!0SS

ClientFServer relationship

+ e t - o r 5 i n g 8 a n a g e 8 e n t

1 3 5 0 OM S

e OM S

'ach application is license controlled and separately purchasa7le.

1350 OMSEML 6or the 'le8ent Layer 6unctions such as +' creation9 SG donload9 +' data7ac5upFrestore.

The etor7 P-sical 8esource 9P8: 8odule is also part o6 the 1!,0 O(S-'(L application. *t8anages netor5 construction and inventory on physical resource Bi.e. +'9 7oards9 ports. *t providessupport 6or 8anualFauto8atic physical lin5 creation.

1!,0 O(S-S3 6or the S3 technology and 6or the G3( technology in so8e eEuip8ent9 e.g. 12L(.

1!,0 O(S-HT 6or the data technologies9 such as 'thernet9 T-(LS9 C'S BCircuit '8ulation Service.

1!,0 O(S-SO+'T 6or the SO+'T technology.

1!,0 O(S-G3( 6or the G3( technology in so8e eEuip8ent9 e.g. 1D!0SS.

1!,0 O(S provides users ith the ease o6 accessing and using the eO(S Be87edded Optical(anage8ent Syste8 to provision the 6or8er Lucent legacy netor5. 1!,0 O(S-eO(S acco8plishes7oth the '(L and +(L 6unctions. *t is integrated ith the 1!,0 O(S %* 6or single login and co88on%* navigation.

*t relies on the Co88on :ault (anage8ent co8ponent to display alar8s.

*t is integrated ith '(L9 S39 G3( and SO+'T applications 6or su7-netor5 8anage8ent.








'Ia8ple o6 service provisioning< 'thernet over S3 over G3(

1 D , 0

T S S

%7'

S T ( - +

S T ( - +

1!,0 O(S S3 1!,0 O(S S31!,0 O(S G3(

1 D , 0

T S S

1 D ! 0

. S S

%7'

1!,0 O(S HT1!,0 O(S HT

1!,0 O(S HT

1!,0 O(S S3

1!,0 O(S G3(

e n d - p o i n t s

s e l e c t i o n 6 o r

p r o v i s i o n i n g

e 6 6 e

c t o 6 p r o v i s i o n i n g

A; ( E

F

1D!0SS 1!,0 O(S G3(

1D,0TSS J1!,0 O(S S3 6or S3K J1!,0 O(S HT 6or'thernetK

Let=s consider a %iga7it 'thernet service across S3 and G3( netor5s. The G3( netor5 is 8ade o6

1D!0SS eEuip8entM the 'thernetFS3 netor5 is 8ade o6 1D,0TSS eEuip8ent. 1D!0SS 8anage8entreEuires 1!,0 O(S-G3(M S3 8anage8ent o6 1D,0TSS reEuires 1!,0 O(S-S3M 'thernet 8anage8ento6 1D,0TSS reEuires 1!,0 O(S-HT.

Ghile provisioning the G3( netor59 the user has to select the end-ports o6 node C and node 3. All theG3( nodes 7eteen the to ports are con6igured.

Ghile provisioning the S3 netor59 the user has to select the suita7le points o6 node A and node :. All theS3 nodes 7eteen the to points are con6igured.

Ghile provisioning the 'thernet service9 the user has to select the end-ports o6 node A and node :. The'thernet con6igurations are eIecuted on node A and node :.








(aster and resentation< %* processes

HTSO+'T

+etor5 hysical Resource

Borts9 hysical connections9 ...

G3(

+' 8anage8ent

S3

protocol adapters N 7asic +' 6unctionalities

eOMSSecurity

er6. (onit.

omponents

Alar8s

EML

ML

Server

(aps

%* server

%* server

%* server

%* server

%* server

%* server

% 2 * s e r v e r s

%* server

%* clients

C

%*< %raphical ser *nter6ace

Auto8atic donload o6 %*clients 6ro8 Server to C

4roser - 'Iplorer9 (oilla :ire6oI9 ...

PA$A 1. and patches - !2 7it con6iguration

2%4 RA( B!%4 RA( strongly reco88ended

1!,0 O(S runs on servers and the user 8a5es use o6 C.

*n the server9 the usage o6 the applications is acco8plished 7y the %* server processes. These processesare driven 7y the %* client processes that run on the C. The C donloads those processes 6ro8 theserver at the 6irst login and henever a 6eature Be.g. open the eEuip8ent vie is used 6or the 6irst ti8e.

This slide 6eatures the case here all the applications and processes are installed in one server. The8anage8ent o6 the netor5 8ay reEuire 8ore servers.

O(S %* 6ollos a 6ull e7-7ased approach.

+o 8anual client so6tare distri7ution and installation procedures are reEuired in the C apart 6ro8 a e77roser and Pava.

To 5no the C=s reEuire8ents9 clic5 the R'Q*R'('+TS lin5 in the e7 des5top.

+ote< previous Pava versions Be.g.< 1.@ are not supported. Pava @ 7it is not supported.+ote< *nternet 'Iplorer D is supported on Gin "9 con6igured in 7ac5ard co8pati7ility 8ode to or5 as *'".








(aster and resentation eIa8ple

(ore users 8ore load o6 %* server processes

%* server processes can 7e installed on resentation servers in order tounload the (aster servers

(aster<

6or ApplicationsB %* servers

resentation<

6or %* servers'(L %* server

S3 %* server

HT %* server

resentation

(aster < S3 HT

%* server

(aster < '(L 1

%* server

(aster < '(L 2

1!,0 O(S-'(L

%* server

1!,0 O(S-'(L

1!,0 O(S-HT1!,0 O(S-S3

Server4

Server A

ServerC

Server3

%* server

'Ia8ple o6 plat6or8architecture

3istri7uted B8orethan one server

one presentation three 8asters

Co-hosted

S3 and HT onthe sa8e server

The type and the nu87er o6 servers to deploy in the netor5 depend on to concerns< the +etor5

(anage8ent Syste8 load and the +etor5 (anage8ent Syste8 constraints.

The +(S load can 7e evaluated ta5ing into account a nu87er o6 6actorsM 8ainly<

•the sieFcon6iguration o6 the netor59 that is the nu87er and type o6 +etor5 'le8ents.

•the reEuired applications.

•the Added-$alue co8ponents< Open *nter6aces9 igh Availa7ility.

•the nu87er o6 active users or5ing ith the syste8 at the sa8e ti8e.

As +(S constraints9 the 6olloing rules apply.

•The '(L application can 7e split over 8ultiple servers.

•'ach single +(L application can not 7e distri7uted over 8ultiple servers.

•

(ore applications can co-reside in a single server.

Section 1 / (odule 1 / age 1!







igh Availa7ility

sually

(ain Active

Spare Stand-7y Baligned to (ain

Resilient con6igurations

11

+1

(utual protection

Server

Application1 is Active

Application2 is Stand-7y

Server

Application1 is Stand-7y

Application2 is Active

2(7Fs 8in 7eteen (ain and Spare

Localstorage (

Localstorage

+(S A (asterSpare+(S A

(aster(ain

1 1

1!,0 O(S-A is the igh Availa7ility application. *t 6oresees at least to server 8achines.

The co88it8ents o6 igh Availa7ility are<

•Replication o6 the Core applications and their relevant data 6ro8 the Active server to the Stand7y one.

•(onitoring o6 the health status o6 the active 8achine and all its processes.

•Triggering the sitchover o6 netor5 supervision 6ro8 Active to Stand7y in case the 6or8er one is no 8orea7le to carry out its tas5. The activation o6 the Spare +(S in place o6 the (ain one can 7e doneauto8atically or 8anually.

*n principle the protection is provided at the application level< it 8eans that a 6ailure on a single process inany o6 the Core applications can trigger a selective sitch-over involving ;ust the a66ected application andnot all the others.

The data7ase o6 the spare server is populated 7y the replication 8echanis8s9 7ut it is 5ept inactive ith

respect to the netor5 supervision. According to the custo8er reEuire8ents9 igh Availa7ility is a7le to protect single +(S applications9 holesites or partial sites through the 6olloing di66erent resilient con6igurations<

•11K< the (ain server is connected ith a dedicated co88unication lin5 to the protecting Spare server9usually located in a geographically re8ote site hen 3isaster Recovery Centers are envisaged.

•+1J >+-plus-1?< 8ultiple serversFapplications are protected 7y only one Spare server that duplicates theapplication data o6 all the running applications on the active servers 7ut9 upon 6ailure9 protects only oneapplication per type.

• J(utual rotectionK< the (ain server is concurrently Active 6or the 6irst application and Stand7y 6or thesecond one. The other server con6iguration is dual< the 6irst application is O::9 the second one is O+. Thissolution ai8s at providing load 7alancing in the no8inal situation9 so 7etter scala7ility targets. pon 6ailuresthe custo8er could pay so8e per6or8ance degradation hile 5eeping 6ull +etor5 (anage8ent capa7ilities6ro8 one host.

Section 1 / (odule 1 / age 1@






2 '(L (anage8ent :unctions

Section 1 / (odule 1 / age 1,





1 · 1 · 1!COR*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


'(L 6unctions

'(L supplies 6unctionalities as de6ined in *T-T (.!100<

Con6iguration 8anage8ent

:ault 8anage8ent

er6or8ance 8anage8ent

Security 8anage8ent






1 ·1 ·1"COR*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


+' 3irectory :unctions

+etor5'le8ent list

+' creationindo

+' 3irectory (anage8ent<

+' CreationFRe8oval%lo7al +' inventory

+' na8ing and addressing

Section 1 / (odule 1 / age 1"





1 ·1 ·1#COR*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


+etor5 Topology :unctions

Su7-netor5tree

Su7-+etor5(ap

+odes andhysical lin5s

+etor5 Topology (anage8ent<

Creating the topology B+etor59 Su7-+etor5 AddingFdeleting +ode in 8aps

Creating hysical Lin5s 7eteen +odes

Topology Autodiscovery

Alar8 status propagation in 8aps

Section 1 / (odule 1 / age 1D





1 ·1 ·1$COR*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


'Euip8ent $ie and So6tare (anage8ent :unctions

So6tare(anage8ent

'Euip8ent $ieli5e the local

8anage8ent=sBCra6t Ter8inal9U*C9 G'4-*9 ...

+etor5 'le8ent 8anage8ent<

+' Supervision 8anage8ent AlloFinhi7it Local Cra6t access to +'

+' Re8ote *nventory 8anage8ent

+' JSho eEuip8entK 6or accessing all the eEuip8ent 8anage8ent 6unctions

'na7lingFdisa7ling alar8 noti6ications

Con6iguring the alar8 severity pro6ile

(anaging +' ti8e and synchroniation sources

4ac5ing up and restoring the +'s con6iguration

+' So6tare 8anage8ent

%et in6or8ation on the +' so6tare

3onloading so6tare 6ro8 a server to an +'

ActivatingFdeactivating +' so6tare

Section 1 / (odule 1 / age 1&







Alar8 :unctions

Alar8Surveillance

Alar8s (anage8ent<

Receiving and processing alar8sSetting up 6ilter criteria 6or receiving alar8s

(anaging alar8 log 6iles

*nternal storage and processing o6 current alar8s in6or8ation

*nternal storage and processing o6 alar8 history in6or8ation

ser inter6ace service 6or display purposes

Alar8s synthesis represented in all vies concerning an entity








er6or8ance (onitoring :unctions

(onitoredcounters

(easure

er6or8ance (onitoring (anage8ent<

'na7ling the error countersCon6iguring the error counters threshold

er6or8ance (onitoring collection

Report generation

Logging per6or8ance data








Syste8 ad8inistration :unctions

Syste8(anage8ent

Security(anage8ent

:or the ad8inistrator<

Syste8 (anage8ent<

StartingFstopping the syste8

Syste8 trace and logs

3isplaying and 8anaging the processes

Syste8 4ac5upFRestore

eriodic actions scheduling

Security (anage8ent<

Accessing the syste8

Assigning pro6iles

Access rights to the +'







! '(L Architecture







! '(L Architecture

'(L-*( processes

1!,0 O(S '(L interacts ith the +'s 7y 8eans o6 the '(L-*(B*n6or8ation (anager processes

'(L-*( is called also +etor5 Adapter B+A

There are several '(L-*( types. 'ach '(L-*( type<

can 8anage several +'s types and releases

is 7ased on the co88unication protocolFs supported 7y the +'s< OS* Q! * S+( * TL1

can have several instances that are created during the syste8 installation andcon6iguration. 'ach instance is responsi7le 6or a nu87er o6 +'s.

S+(< Si8ple +etor5 (anage8ent rotocol

TL1< Transaction Language 1

'(L-*( processes i8ple8ent the inter6ace toard the netor5=s +'s. 3i66erent types o6 '(L-*(s areprovided in order to 8anage di66erent +'s inter6aces BQ!9 S+(9TL1 andFor di66erent +'s technologiesB3CFA3(FG3(F'TFS3FSO+'TFV.

'(L-*( acts as a 7ridge 7eteen +(L (anagers9 %*s9 and the +'s9 too.

Section 1 / (odule 1 / age 2@






EML-IM

type Protocol Notes Examples

A3( Q! OS* Q! -

164E!" 16#$%!&" 166%!&" 166$%!" 1664%!" 16'$%!"

1666-##%R" L(R" )(D" )(R" 164$*!" 16$L! R+,./"

166L! R+,.4" 16/6*!" 1606!%

3C Q! OS* Q!3igital cross

Connect16'/!&& R,.$" 1641%2" 1664%2" 16'4L3

COR4AS+(

* S+( -0#$$!R" 5%A-E%" L)2#$" )L%" 160!%E"

/E% in 1646%! R. and 1646%!& R.

@%OS* Q! * S+(

- 166L! R47R#" 1/#$8%%-" 1/#$8%%-$ R+,.$

&,00(C * S+( - 0#$$!2&

S+A * TL1 * S+(

!ost recent

9Es

!ost 1/#$8%% #; #&; #R; 1$$; 16$ 7 $ R,.$<"

1/$%%" 1#4$L59A" 1/'$88%"

16$L! R,4." 166L! R,6.$" 1646%!=&"

/E% in 1646%! R.$ and 1646%!& R1.$

C+A OS* Q! - 164#A!&

T+A * TL1 - 16'#L)

S%( -!rd party

+'sRaman ump" 1#11E!

! '(L Architecture

'(L-*( vs +' - eIa8ples

A3(< Add and 3rop (ultipleIer

S%(< S+( %eneric (apper

S+A< S8art +etor5 Adapter

S+(< Si8ple +etor5 (anage8ent rotocol

C(*S'< Co88on (anage8ent *n6or8ation Service 'le8ent. *t=s an application Blayer " protocol o6 Q!stac5.

COR4A< Co88on O7;ect ReEuest 4ro5er Architecture

C+A< C(*S' +etor5 Adapter

T+A< TL1 +etor5 Adapter

TL1< Transaction Language 1

@%< @th %eneration W ti8e 6ra8e 7eteen J+'s ith A3( Q! '(L-*(K and J+'s ith S+A '(L-*(K

TSS< Transport Service SitchSS< hotonic Service Sitch

O(S+< Optical (ulti Service +ode

R< &00S

LR< &00LS

(R< (icroave ac5et Radio

<;<= 'ach release o6 1!,0 O(S and its applications support certain +'s ithin the Alcatel-Lucent 6a8ily o6optical +'s. (ention o6 +'s or speci6ic +' 6eatures in the teIt o6 this docu8ent9 or any docu8ent in the1!,0 O(S docu8entation set9 that are not supported in this particular product release can apply to prior or6uture product releases. Such 8aterial 8ay not 7e currently visi7le or opera7le on the %* andFor theserver and has 7een added only as a convenience 6or our custo8ers. This 8aterial is su7;ect to change. :or

the list o6 +'s that are supported in the 1!,0 O(S &.9 contact your Alcatel-Lucent local custo8er servicesupport tea8.

Section 1 / (odule 1 / age 2,





1 · 1 · 2!COR*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

3iscussion or Euestion

List and de6ine the '(L 6unctionnalities X






1 · 1 ·2"COR*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

'nd o6 8odule1!,0 O(S Overvie





))S'C


All Rights Reserved © Alcatel-Lucent @@YEAR

(odule 1,e ortal


Section 2%raphical *nter/ace

1!0 O(S '(L



Section 2 (odule 1 age 1




1!0 O(S '(L R&. Operation and (aintenance%raphical *nter/ace ,e ortal

2 · 1 · 2COR*%3T © ALCAT'L-L4C'+T 2012. ALL R*%3TS R'S'R$'5.

6lan7 page

This page is le/t lan7 intentionally

5ocu8ent 3istory


01 2012-11-09 $allet: Carole ;irst edition







(odule o<ectives

4pon co8pletion o/ this 8odule: you should e ale to=

Login: log out and start the 1!0 O(S

Start the 1!0 O(S>s applications

Custo8i?e the ,e ortal

Section 2 (odule 1 age !






(odule o<ectives @cont.


Section 2 (odule 1 age B






Tale o/ contents

SCitch to notes vieCD age

1 Login Windows "2 Web Portal Overview 113 How to Logout 22

Section 2 (odule 1 age






Tale o/ contents @cont.

SCitch to notes vieCD


Section 2 (odule 1 age






1 Login ,indos

Section 2 (odule 1 age "






1 Login ,indos

reli8inary setting

1. Select the /olloing /older=

C = E ,*++T E syste8!2 E drivers E etc

2. 'dit and savethe /ile FhostsG

!. *nsert the * addressand hostna8e o/ theServer

B. Save the/ile andeHit

To gain /ull access to the 1!0 O(S %4*s through the ,e 5es7top: the C 8ust e con/igured so that the

1!0 O(S>s server can e reached using the server>s hostna8e. */ the 5o8ain +a8e Server I5+SJ iscon/igured on the C: it should e con/igured so that the server>s hostna8e is 8anaged.

*/ such a con/iguration is not /easile: the Fserver>s hostna8eG F* addressG association 8ust e8anually inserted in the /olloing /ile=

C=E,*+5O,SEsyste8!2EdriversEetcEhosts in case the C runs the ,indosK Operating Syste8

etchosts in case C runs the C-LinuH Operating Syste8






2 · 1 · 9COR*%3T ©A LCAT'L-L4C'+T 2012. ALL R*%3TS R'S'R$'5.

1. Open a ,e 6roser and typethe Server>s * address as Address

1 Login ,indos

,e 6roser

Section 2 (odule 1 age &






1 Login ,indos

,e 5es7top

1. Clic7anyhere

$'RS*O+= to chec7 the1!0 O(S>s so/tare

2. *nsert 4ser andassord andthen Login

To chec7 the CreMuire8ents

The user passord is su<ect to the /olloing constraints=

At least 2B hours should last since the last change

The ne passord should contain at least one digit @0-&

The ne passord should contain at least eight characters

The ne passord should contain at least to special characters

The ne passord should contain at least one uppercase letter

The ne passord should not contain the user identi/ier







2 ,e ortal Overvie







2 ,e ortal Overvie

,e ortal

,e ortal is a Nava application that is started hen the user logs in /ro8the ,e 5es7top

Status ar

Toolar

Le/t Treeanel

Application List Area

(essage Area

(ain ar

The e ortal provides the user ith a vie o/ all the 1!0 O(S>s applications.

The Le!t "ree Panel is a navigational panel hich is organi?ed ith a hierarchical tree that lists the1!0O(S>s applications. The applications are grouped as O#eration I(anage8ent: Alar8: +etor7 ToolsJand $d%inistration ISyste8: 5ata (anage8ent and Security Ad8inistrationJ. ,hen a /older is selected/ro8 the Le/t Tree anel: the sutended applications> icons are displayed in the Application List Area.

The $##li&ation List $rea allos to start an application: doule clic7 an icon or right clic7 the icon todisplay a 'tart utton.

The (essage $rea displays application>s and ,e ortal>s 8essages.

The 'tatus bar displays the last application or ,e ortal>s 8essage.







2 ,e ortal Overvie

(ain ar and Toolar

,hile closingthe ,eortal...

The user can add or re8ove pre/erred applications to the Tool ar y 8eans o/ )*dit +usto%i,e t-e

toolbar. or doule clic7 an application and then )$dd to toolbar./

The applications added to the toolar can e listed y issuing )0iew Pre!erred $##li&ation List./

Section 2 (odule 1 age 1!






2 ,e ortal Overvie

,e ortal navigation

Operation

Ad8inistration

Co88on syste8 applications are grouped y their logical /unction as /ollos=

O#eration includes applications /or +etor7 rovisioning and *nventory: Alar8s and +etor7 Tools.

$d%inistration includes syste8 ad8inistration tools: such as Syste8 (onitoring: Tas7 Scheduler:5ata 6ac7up and Restore and Security Ad8inistration.

Section 2 (odule 1 age 1B





2 ·1 ·15COR*%3T ©A LCAT'L-L4C'+T 2012. ALL R*%3TS R'S'R$'5.

2 ,e ortal Overvie

Operation applications= +etor7 (anage8ent

(ulti Service - %raphical 4ser *nter/ace I('J

co88ands /or the 1!0 O(S>s applications I'(LS53T,5(J

(aps

er/or8ance (onitoring ... Right clic7 and

choose FStartG ordoule clic7 onthe related iconto start thedesiredapplication

(S-%4*

The etwor (anage%ent application provides the (ulti Service %raphical 4ser *nter/ace I('J:

to create: 8odi/y: delete: retrieve and provision the +'s and the S53: SO+'T: ,5( and T netor7. *tprovides inventory lists /or Muerying the content o/ the 8anage8ent applications> dataases. *t alsoprovides a 8ap o/ the 8anaged netor7 on hich various netor7 o<ects are displayed: such asSunetor7s: +odes: Lin7s: etc. er/or8ance (onitoring is also issued y the (S-%4*.







2 ,e ortal Overvie

Operation applications= Alar8s

Alar8s

,5(

Alar8s'(L

Alar8s

S53

Alar8sT

Alar8s P Logs

+' Auto5iscovery

'vents=

S+C sitch

tunnel sitchloopac7

The Alar8s application is the single co88on /ault 8anage8ent %4* hich provides presentation /unctions

/or the alar8 o/ all 8anaged +'>s and netor7. The %4* presents a dyna8ic vie o/ all current andhistorical alar8s in the 8anaged netor7. 6esides the %loal Alar8 (anage8ent: hich consolidates all the+'>s ele8entary alar8s and S+C sitching events and the netor7 correlated alar8s o/ the hole syste8:the user can choose to start the applications dedicated to the alar8s /iltered per single application I'(L:S53: ,5(: TJ.

The +'A5#4S( I+etor7 'le8ent Auto 5iscovery 4ser Service (anage8entJ opens the %4* /or thecreation o/ the auto-discovered +'s.

The Current 'vents log opens an Alar8 Surveillance li7e %4* that lists the S+C sitch: T-(LS(LS-Ttunnel sitch: and loopac7 con/iguration events /or 190TSS-100: 190TSS-10!20 and 19!0SS.






2 ·1 ·17COR*%3T ©A LCAT'L-L4C'+T 2012. ALL R*%3TS R'S'R$'5.

2 ,e ortal Overvie

Operation applications= +etor7 Tools

%'+OS= generic OS-to-OS inter/ace

'OS= 'Hternal OS

OS= Operation Syste8

%'+OS= Open *nter/ace to eHport alar8s: per/or8ance 8onitoring:netor7 inventory: and re8ote inventory to eHternal OperationSyste8s.

The 1!0 O(S supports Open *nter/aces IO*J as an added value 8odule: hich is re/erred to as the

1!0 O(S O*. The 1!0 O(S O* so/tare pac7age is installed independently o/ any other applicationsuch as the 1!0 O(S S53: 1!0 O(S T: 1!0 O(S ,5(: or 1!0 O(S SO+'T: or any ele8ent8anager such as the 1!0 O(S eO(S or 1!0 O(S eO(S.

The 1!0 O(S O* enales the 1!0 O(S applications to eHport or i8port data to 8ultiple eHternaloperation syste8s IOSsJ. The 1!0 O(S O* is a /leHile: poer/ul: and e//ective set o/ generic OS-to-OSinter/aces I%'+OSJ that allo an eHternal OS to synchroni?e alar8s: per/or8ance 8onitoring: netor7inventory: and re8ote inventory data ith any o/ the 1!0 O(S applications.

4p to +etor7 Release &.B: +etor7 Tools reports also the icon to start the F* over OS* tunnelG con/iguration that is availale in (S-%4* /or R&..

Section 2 (odule 1 age 1"






2 ,e ortal Overvie

Ad8inistration applications= Syste8

Applications 8eantonly /or users ho

carry outad8inistration activity

on the server

*t is use/ul /or usersho carry out

provisioning: tooIsee neHt slideJ

The "as '&-eduler enales the ad8inistrator to schedule the eHecution o/ <os that typically include

ac7ups o/ data: purges o/ data: clean ups o/ data: and ( data collection.

The 'ste% (onitor is the graphical inter/ace that allos the user to per/or8 process 8onitoring/unctions Istart: stop: vie the status: vie the traces: etc.J on ite8s that appear in a tree structure.







2 ,e ortal Overvie

Ad8inistration applications= Syste8 @cont.

rocesses(onitoring and

Control

*(= *n/or8ation (anagerS+A= S8art +etor7 Adapter

'(L-*(s

1!0 O(S

A5( Q! Ie.g. 10S(J

S+A Ie.g. 190TSS:19!0SS: 12L( RJ

COR6A S+( Ie.g. *SA

oards: &00(RJ

1!0 O(S '(L

Section 2 (odule 1 age 1&






2 ,e ortal Overvie

Ad8inistration applications= 5ata (anage8ent

To install on the '(L the +'so/tare pac7ages to e then

donloaded to the +'s

Applications 8eant only /or usersho carry out ad8inistration

activity on the server

The a&u# and estore applications allo the ad8inistrator to du8p and restore a copy o/ the

application data to a dis7 or a tape.

'Ha8ples o/ <os=

•5tw: hich is all 8anage8ent syste8 data and +' ac7up data: 8eaning: netor7 data

• $': hich is all alar8 surveillance data

•P(: hich is all per/or8ance 8onitoring data

•'wdl: hich is all data pertaining to +' so/tare donloads

•Log: hich is all log /ile data

•'7ste% +on!iguration: hich is all syste8 con/iguration data

•O#erator: hich is user data that includes the ho8e directory o/ all created and prede/ined 1!0O(S-'(L users

The * 'W Pa&ages allos the ad8inistrator to install on the '(L the +' so/tare pac7ages to edonloaded to the +'s /or possile upgrades.







2 ,e ortal Overvie

Ad8inistration applications= Security Ad8inistration

ser 'ession to chec7 and /orce out the logged user

ser $&&ounts to create: 8odi/y and delete the users

ser Pro!iles to 8anage ;unctional Access 5o8ain: O<ect Access

5o8ain: user pro/iles: etc. per single application







! 3o to Logout







! 3o to Logout

3o to do it

;ro8 the ,e ortal:select= );ile Logout<.

Section 2 (odule 1 age 2!





2 · 1 ·24COR*%3T © ALCAT'L-L4C'+T 2012. ALL R*%3TS R'S'R$'5.

Log on the '(L application and discover the e portal

5iscover

Ti8e alloed= 8inutes

Section 2 (odule 1 age 2B





2 · 1 ·25COR*%3T © ALCAT'L-L4C'+T 2012. ALL R*%3TS R'S'R$'5.

'nd o/ 8odule,e ortal





))S'C



(odule 2(ulti Service %,*


Section 2%raphical *nterace

1!0 O(S '(L







1!0 O(S '(L / R&. Operation and (aintenance%raphical *nterace /(ulti Service %,*

2 · 2 · 2COR*%T © ALCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

4lan5 page

This page is let 6lan5 intentionally

3ocu7ent istory









(odule o6;ectives

,pon co7pletion o this 7odule9 you should 6e a6le to<

Operate the (ulti Service - %raphical ,ser *nterace =(S-%,*>







(odule o6;ectives ?cont.@








Ta6le o contents

SBitch to notes vieBC age

1 MS-GUI layout "2 Main command-bar 1"3 Left area 214 Filtering and earc!ing 305 Lit management 41" #o$y%$ate 5!& '$tion 58






2 · 2 · "COR*%T © ALCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

Ta6le o contents ?cont.@

SBitch to notes vieBC age





1!0 O(S '(L / R&. Operation and (aintenance%raphical *nterace / (ulti Service %,*

2 · 2 · &COR*%T © ALCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

1 (S-%,* layout






2 · 2 · (COR*%T © ALCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

1 (S-%,* layout

(ain points

(S-%,* is shared 6y all the applications<

1!0 O(S '(LDS3DETDF3(

TBo types o applicationGs co77ands<

Actions< or provisioning

Search< to retrieve the provisioned o6;ects =e.g. +'s> according to the o6;ect type9 the HueryGs result is a list or a graphical BindoB

:our 7ain operational panels<

(aps

Lists

%raphical

Logs

The (S-%,* presents 7aps9 lists9 Hueries9 and graphical vieBs o netBor5Gs o6;ects. *t provides a central

point supporting co7prehensive unctional navigation across the Bhole 7anaged netBor5.

The (S-%,* is the uniHue interace to access to the eatures o all the 'le7ent (anage7ent ='(L> and the+etBor5 (anage7ent =S39 F3(9 ET9 SO+'T> applications o the 1!0 O(S.

:ro7 the 7ap o the (S-%,* the user is a6le to<

vieB all nodes and physical lin5s 6etBeen the79 ani7ated 6y their alar7 status

retrieve lists o netBor5 entities

organiIe nodes into recursive su6-netBor5s9 so having a partitioned 7ap vieB o the 7anaged netBor5

use 7enus conteJtual to the selected entity and to the user proile

start the provisioning BiIards






2 · 2 · )COR*%T © ALCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

1 (S-%,* layout

Search and Actions






2 · 2 · 1*COR*%T © ALCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

1 (S-%,* layout

OvervieB

(ain co77and-6ar

:iJed tool6ar

*cons that dependon the selectedo6;ect

(ain Area

• Logs

• Lists

• %raphical

• (aps

•Co7pound $ieBs

Let Area







1 (S-%,* layout

(aps

Let Area

(aps tool6ar







1 (S-%,* layout

Lists

'Ja7ple< +etBor5 'le7ents list







1 (S-%,* layout

%raphical

'Ja7ple< hysical Connection structure







1 (S-%,* layout

Logs

Clic5 any colu7nGs header to sort







1 (S-%,* layout

Co7pound $ieBs

18!0SS

Favelength Trac5erGs

outco7e






2 · 2 · 1"COR*%T © ALCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

1 (S-%,* layout

*no ro7 %,*

Ongoing or last operation

eap 7e7ory siIe?used@ o ?7aJ@

Clic5 the 6as5et =Run the %ar6ageCollector> to clean the not-usedseg7ents o the heap 7e7ory

rogress4ar

CGs 3ate and Ti7e

%,* servers connectionstatus synthesis

The GUI er+er connection tatu ynt!ei icon shoBs i all the %,* servers are connected =plug

close> or i so7e o the7 are disconnected =plug open>. * a %,* server is disconnected9 the eJecution o itsoperations is not availa6le or ails. * the plug is open9 the KApplication roperties BindoB can 6e opened6y clic5ing the plug. Such a BindoB states the status =connected or not> o each %,* server. * the plug isclose9 the KApplication roperties BindoB can 6e opened ;ust 6y< :ile roperties.

• T3(< 1!0 O(S S3

• :TS< :ile Transer Scheduler

• C(< Converged eror7ance (anage7ent

• T(< Topology (anager M 1!0 O(S '(L

• CLO%< Co77on Log

• ET< 1!0 O(S ET

• (A• C4< Co77issioning and oBer 4alancing =or 18!0 SS>

• F3(< 1!0 O(S F3(

• LT< Line Tuning =or 12 L(>

Co77on 7eans that it is shared 6y all the applications.

The ,ate and ime are the CGs onesN they are not the 1!0 O(S serverGs ones. *t is necessary that theCGs date and ti7e are aligned to the serverGs9 so that the dierence is loBer than 7inutes9 otherBiseso7e applications =e.g.< rocesses (onitoring and Control %,*> Bill not start andDor Bill not Bor5 correctly.






2 · 2 · 1&COR*%T © ALCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

2 (ain co77and-6ar






2 · 2 · 1(COR*%T © ALCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

2 (ain co77and-6ar

:irst level drop-doBn 7enus

File Close Selected view or all windows

File Print Selected view

Edit Find… Find a tet string in the !ain "iew# $t%s case sensitive#

Tools Left Area &hange the appearance o' the le't tree area to !aps( Search()indows( &ommand or Favorites

Tools Options Ena*les the user to control certain t+pes o' ,$ screen *ehavior

Tools Manage server connection Allows to disconnect or re-connect previousl+ disconnectedapplication ,$ servers .i#e# /D!( F/S( &0!( /!( &L1,( 02/()D!( !A0( &03( L/4






2 · 2 · 1)COR*%T © ALCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

2 (ain co77and-6ar

The Search (enu

uery optionsdependent onthe 1!0 O(Sinstallation=e.g. 1!0 O(SF3( is notinstalled>

uery optiondependent on theo6;ect selected inthe 7ap or list=e.g. a +ode>

OT+< co77ands or 1!0 O(S S3

ac5et< co77ands or 1!0 O(S ET







2 (ain co77and-6ar

The Actions (enu

uery optionsdependent onthe 1!0 O(Sinstallation=e.g. 1!0 O(SF3( is notinstalled>

uery optiondependent on theo6;ect selected inthe 7ap or list=e.g. a Su6-+etBor5>

4y the Actions (enu the user can peror7 tas5s on the netBor5Gs o6;ects =create9 delete9 discover9

synchroniIe9 P> and on :ile Transer Scheduler ;o6s9 set the eror7ance (onitoring =(> report options9retrieve and 7odiy o6;ects properties9 etc.







! Let area







! Let area

OvervieB

MapsSelection o' this icon causes the categories o'domain map resource trees .Su*-networ5s4 to *edispla+ed in the le't panel#

Search

Selection o' this icon causes a search capa*ilit+to *e displa+ed in the le't panel# /he user enterssearch criteria( the results o' which are displa+edin the !ain "iew panel#

WindowsSelection o' this icon ena*les the le't panel todispla+ the list o' open windows grouped *+categories#

OperationsSelection o' this icon ena*les shortcuts to certainoperations to *e displa+ed in the le't panel#

FavoritesSelection o' this icon ena*les the le't panel to *epopulated with a tree that shows the 'olderscontaining *oo5mar5s de'ined *+ the user#

ObectsSelection o' this icon ena*les shortcuts to certaino*6ects .7odes( 7etwor5 Elements( 0h+sical&onnections( 84 to *e displa+ed in the le't panel#

Let Area







! Let area

(aps

=Su6->+etBor5Tree To shoB the selected Su6-netBor5

• dou6le clic59 OR

• right clic5 Search (ap

3isplayed 7ap

Reload

7aps tree

:ind







! Let area

Search =ilter>

As ar as '(L isconcerned9 itGs the,ser La6el

A neB list containingthe ilteringGs

outco7e is opened







! Let area

FindoBs

%roup 6y category

Sort 6y na7e Close(ove toront 3oc5

,ndoc5

OR dou6le clic5

OR dou6le clic5 the header othe undoc5ed BindoB







! Let area

Operations

1. K3rag the desiredSearch or Actionsco77and olloBingsuch a path

2. K3rop Bhen thepointer appears

Add neB category Re7ove selected operationShortcuts or the preerred KSearch and KActions

co77ands







! Let area

:avorites

%roups o KLists9 K(aps9 K%raphical

BindoBs

1. Clic5 KAdd a +eB:avorite icon

2. Choose so7e BindoBsa7ong the open KLists9

K(aps9 K%raphical

. OE

!. Assigna na7e

'Jecute at startup< the selected BindoBs are opened at (S-%,* opening =+etBor5 (anage7ent Start>.







! Let area

:avorites ?cont.@

Add a +eB:avorite

(odiyLoad associatedBindoBs

Re7ove Selected:avorite

Create a neBgroup o :avorites

1. To open all the BindoBs 6elonging to thecreated avorite9 select the avorite and ... 2. ... clic5 this icon9

OR ...

!. ... dou6le clic5 theavorite







! Let area

O6;ects

List o preerred o6;ects=+'9 +odes9 hysical

Connections9 ...>

1. Select an o6;ect=e.g. +'> in the listand dragQdrop

2. Select the o6;ect and<• right clic5 to get the drop-doBn

co77ands list• dou6le clic5 to get its properties

AddCategory

3eleteCategory







:iltering and searching

Section 2 / (odule 2 / age !0







Search =ilter> ro7 the let area

As ar as '(L isconcerned9 itGs the,ser La6el

A neB list containingthe iltering outco7e

is opened








Open a list as iltered

1. Clic5 the K'na6le :iltered

Searches icon

2. 3o aSearch

!. The BindoB that opensis a ilter coniguration

. Set the ilter . OE

ou can decide toshoB the outco7e

o the ilteredsearching in an

already open list othe sa7e type. *

so9 the currentcontent o the list

is lost.








Open a list as iltered ?cont.@

1. *nstead o clic5ingthe K'na6le:iltered Searches

icon9 ...

2. ...9 itGs possi6le to ena6lesuch a iltering 6y KTools Options9...

!. ...and tic5ing K3isplay:ilter dialog on Search

Section 2 / (odule 2 / age !!







:ilter an open list

1. Clic5 the KChangeSearch Criteria icon

2. Clic5 K(odiy

!. Set the ilter








:ilter per colu7n








:*LT'R 6y 7eans o the 6otto7 6ar

1. Clic5 the 3isplay :ind Tool6ar icon

2. Type








:*+3 6y 7eans o the 6otto7 6ar

ighlights all occurrences othe phrase

:ind the neJt occurrenceo the phrase

:ind the previousoccurrence o the phrase

1. Clic5 the 3isplay :ind Tool6ar icon

Section 2 / (odule 2 / age !"







ListGs counters

" ite7s in the not iltered list

ite7s that donGt7atch the ilter

All +'s =not iltered>

+'s iltered per colu7n Bith KLocation +a7e (ilan or 6y 7eans o the 6otto7 6ar ilter

1 selected ite7! selected ite7s








Si7ply 6y editing< or lists

1. Clic5 any cell o any roB9eJcept cells that 6elongto roIen colu7ns

2. Start typing. This6oJ opens.

The irst occurrence

is highlighted

Section 2 / (odule 2 / age !&







Si7ply 6y editing< or let area

1. Clic5 anyBhere

2. Start editing. This6oJ opens.

The irst occurrenceis highlighted

e.g. (aps







List 7anage7ent







List 7anage7ent

TBo dierent Bays to 7anage the lists

The neB setting appliesto the neB open lists







List 7anage7ent

ShoB group ta6les as deault

ShoB group ta6les as de-ault =not valid -or hierarch and i- cols are -orced>

* disa6led

* ena6led

=deault>

This sectionis availa6le

%rouping colu7nsis not possi6le

An eJa7ple in neJt slide







List 7anage7ent

%roup colu7ns

...itGs possi6le to groupone colu7n or ... ... 7ore than one colu7n

4y 7eans o Kcolu7nGs title dragQdrop ... ... or co77ands in drop-doBn7enu ro7 Kcolu7nGs title9...







List 7anage7ent

(ove a colu7n

Clic5 the colu7nGs

title and dragQdrop

e.g.

...







List 7anage7ent

(ove a colu7n< reeIe

1. Right clic5 thecolu7n title

2. :reeIe ...

e.g. :reeIe Let

The yelloB colu7nsare the roIen ones

:reeIeD,nreeIe areavaila6le or the lists

opened Bhile KShoB groupta6les as de-aultL is

disa6led







List 7anage7ent

ShoBDhide colu7ns

4y deault9so7e colu7ns

are hidden

:ro7 anycolu7n title







List 7anage7ent

Sort a colu7n

Clic5 the colu7n title







List 7anage7ent

'Jport list

K'Jport to CS$... OR ...

... K'Jport data







CopyDpaste

CopyDpaste o6;ects

#o$y ob/ect< to copy the selectedo6;ectDs to the 6uer. The

copied o6;ectDs can 6e Kpasted in the suita6le BiIard or7s =e.g.a node in the KCreate hysicalConnection BiIard>.

The selected o6;ects replace thecurrent 6uerGs content.

#lear co$ied ob/ect< to clear the 6uer

0dd to co$ied ob/ect< to addurther o6;ects to the 6uer

Bithout erasing its content






2 ·2 ·55COR*%T ©A LCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

CopyDpaste

CopyDpaste o6;ects< 'Ja7ple

1. Selectthe o6;ects

2. Copy o6;ect







" Options

Availa6le options

3eaultsettings






2 · 2 · "*COR*%T © ALCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

" Options

AlBays shoB ull 7enus

* disa6led* ena6led=deault>

'.g. KLin5s Over Ca6le in ET<Search ac5et Construction

Transport Lin5 Lin5s Over Ca6le

Co7pleteco77ands list

Collapsedco77ands list






2 · 2 · "1COR*%T © ALCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

" Options

3isplay :ilter dialog on Search

1. 3o a

Search

2. The BindoB that opensis a ilter coniguration

!. Set the ilter . OE

ou can decide toshoB the outco7e

o the ilteredsearching in an

already open list othe sa7e type. *so9 the current

content o the listis lost.

*t corresponds toclic5ing the K'na6le

:iltered Searches icon







" Options

3eine ighlight +a7e 6ased on selection

1.

2.

!. 'dit

* disa6led

* ena6led=deault>

. Outco7e







" Options

,se (A version 2.0

4asic Advanced =(A version 2.0>

The training addresses the K(A version 2.0

* disa6led* ena6led

=deault>






2 · 2 · ""COR*%T © ALCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

" Options

,se old hierarchical ta6les

'.g. KLin5s OverCa6le in ET<Search ac5et

Construction Transport Lin5 Lin5s Over Ca6le

* ena6led

* disa6led=deault>

'Jpand isavaila6le






2 · 2 ·")COR*%T © ALCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

'Jercise

1. Open the 7ap dedicated or the training

2. List the netBor5 ele7ents

!. (ove the location na7eU colu7n as the irst one

. Save the list

Ti7e alloBed< 7inutes






2 · 2 ·&*COR*%T © ALCAT'L-L,C'+T 2012. ALL R*%TS R'S'R$'3.

'nd o 7odule(ulti Service %,*

Section 2 / (odule 2 / age "0



Copyright © 2012 Alcatel-Lucent. All Rights Reserved.TOS!01"#$!.1-S%-R&.-'d1 (odule !.1 'dition 1

1!0 O(S '(L R&. Operation and (aintenanceSyste, Operation +' Creation and Supervision

3 · 1 · 2CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

4lan5 page


3ocu,ent istory

'dition 3ate Author Re,ar5s


Section ! (odule 1 /age 2






(odule o7;ectives

pon co,pletion o6 this ,odule9 you should 7e a7le to<

Create ,anually the +et=or5 'le,ents 7y setting the re>uired para,eters

Let 1!0 O(S '(L auto-discover the deployed +et=or5 'le,ents

Supervise the +et=or5 'le,ents

3elete the +et=or5 'le,ents

Section ! (odule 1 /age !






Ta7le o6 contents

S=itch to notes vie=B /age

1 Introduction "2 NE supervision and deletion 113 NSAP address 24 Creating and addressing a Q3 NE 305 Creating and addressing ISA boards 41 Creating and addressing a 4! Q3 NE 2.1 % ! +' in /TR/ con6iguration .2 % ! +' in (S// con6iguration 8" Creating and addressing an SN#P NE $&".1 &00(DC &$ Creating and addressing a 4! %&1 NE 1'18.1 Creating and addressing an 180TSS 108.2 Creating and addressing an 18!0/SS 11( Creating and addressing a Q3 CNA NE 131

1' Creating and addressing a %&1 NE 13&11 Creating and addressing a !eneric NE 14"12 NE auto discover) 1512.1 +' initiated procedure 1"12.2 1!20CT initiated procedure 1!12.! '(L procedure 6or ! and % +'s 1812. 18!0/SS and &00(/R Auto discovery /rocedure 1"213 Addressing t*e NEs +it* ,-SI over IP. tunnel 1"814 Securit) in A&/ net+or0s 1$81.1 RA3*S 1&01.2 SS 2001.! SSL 2081. S+(/v! 210

1. Secure ,ode 21"

Section ! (odule 1 /age






2 +' supervision and deletion

Starting supervision on an +'

2. Select ,Actions Supervision StartSupervision

1. :ro, the +et=or5 'le,entList9 right clic5 the +'

,Start supervision. starts the ,anage,ent o6 the selected +'

activates alar, collection and con6igurations

*n case o6 % +'9 =here the ele,ent ,anage,ent is per6or,ed via 7oth a ! Eor TL1F agent and an S+(/

agent9 during the KSet +' Address phase only one o6 the t=o addresses 7elonging to the +' E+SA/ and */Fcan 7e con6igured 7y the operator in the '(L. The '(L is in 6act a7le to discover the ,issing addressduring the start supervision procedure.

A6ter supervision is started9 the KSupervision State attri7ute changes 6ro, 3'CLAR'3 to S/'R$*S'3.






3 · 1 · 1"CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


'>uip,ent $ie=

1. +' list

2. Select the +'

!. Right-clic5 Search Sho= '>uip,ent

Section ! (odule 1 /age 1"





3 · 1 · 1$CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


+ode

4y creating an +'9 a +ode is created9 too

the +ode is used 7y +(L applications< S39 /MT9 N3(9...

the +ode can 7e placed in the (ap

+odes

A +ode is a representation o6 the +' that is co,posed only 7y the +' o7;ects that has to do =ith the

trans,ission ,anage,ent ,odel9 that are /orts and Ter,ination /oints.






3 ·1 ·2'CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Step 1< Stop the +' supervision

1. *ssue the +' List 7y,Searc* E#& Net+or0

Eleents.

2. :ro, the +et=or5

'le,ent List9 rightclic5 the +' and then,Actions Supervision 222.






3 ·1 ·21CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Step 2< Re,ove the +ode

2. :ro, the +ode List9right clic5 the +odeand then ,Actions P*)sical eove.

1. Open the +ode List 7y,Searc* P*)sical Nodes.








Step < 3elete the +'

*n the +et=or5 'le,ent List9right clic5 the +' and then,Actions 4elete NE.







! +SA/ address






3 ·1 ·2"CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

! +SA/ address

Syste, addressing< +SA/ address ?cont.@

oain

1 2

A1

A2

A3

A4

Area

NE S)ste I






3 ·1 ·2$CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

! +SA/ address

Syste, addressing< +SA/ address ?cont.@

T=o types o6 e>uip,ent< *nter,ediate Syste,s E*SF9 =ith

routing ta7le 'nd Syste,s E'SF9 =ithout routing

ta7le

T=o protocols< 'S-*S 7et=een an 'S e>uip,ent

and another *S e>uip,ent

*S-*S 7et=een t=o pieces o6 *Se>uip,ent

ES

IS

Alcatel-Lucent ! e>uip,ent runs as an *nter,ediate Syste, E*SF and uses the *S-*S protocol.





3 · 1 · 3'CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

Creating and addressing a ! +'

Section ! (odule 1 /age !0







/rocedure

/reli,inary +' con6iguration 7y ,eans o6 Cra6t Ter,inal1. Con6igure the Local +' OS* Address E+SA/F

2. Con6igure the OS Address E+SA/ o6 the '(L serverF in the +'!. Con6igure the LA/3 inter6ace

. Con6igure the 'thernet inter6ace

'(L con6iguration. Chec5 the '(L con6iguration and process status

. Create the +'

". Con6igure the +' address in '(L

LA/3 ELin5 Access /rocedure on 3-channelsF< supervision protocol that relies on ST(-+Js 3CC 7ytes.








Step 1< OS* address o6 the +'

4y CT9 open the '>uip,ent $ie=and chec5 or con6igure the +'address. This address =ill 7e set

in '(L9 too.

1. Select ,&ocalCon5iguration .

2. +'Js addressE+SA/F

To open the '>uip,ent vie= 6ro, 1!20CT<

Select the supervised +' into the ,apSupervision Sho= e>uip,ent








Step 2< OS* address o6 the OS

:irst o6 all9 as5 the Syste, Ad,inistrator 6or the OSJs +SA/.Then9 7y CT9 open the '>uip,ent

$ie= and chec5 or con6igure it.

1. Select ,-SCon5iguration.

2. OSJs addressE+SA/F

:or setting the OS Address in 1"8(CC9 please re6er to the e>uip,ent docu,entation.

Section ! (odule 1 /age !!







Step !< LA/3 con6iguration

4y CT9 open the '>uip,ent $ie=and chec5 or con6igure the LA/3.LA/3 ,ust 7e ena7led on theST( inter6aces.

1. Select ,&AP4Con5iguration .

2. LA/3

As 6ar as t=o connected ST(-+ inter6aces are concerned<

KLA/3 inter6ace ,ust 7e o6 the sa,e type< (sTT/ or RsTT/ EOTS or O(S in case o6 N3(e>uip,entF

KLA/3 Role ,ust 7e di66erent< one inter6ace as K+et=or5 and the other one as Kser

Connection Oriented Eused to interconnect the +' =ith Alcatel +'F

Connection Less Eused to interconnect the +' =ith not Alcatel +'F. Nhen KConnection-less isused9 the Role o6 the LA/3 inter6ace ,ust 7e set as K+et=or5.

:or % e>uip,ent used as ! +'9 itJs necessary to con6igure the +et=or5 /rotocol9 too< choose KOS*.








Step < 'thernet inter6ace con6iguration

4y CT ena7le the 'thernet

inter6ace o6 the +' 6ro, the'>uip,ent $ie=. sually it isnecessary in the %+'. Select ,enu Con5iguration

Co6outing Inter5acesCon5iguration Et*ernetCon5iguration

Select 7es to ena7le it

Clic5 Appl) to con6ir, any,odi6ication and then Close

4y CT9 open the '>uip,ent $ie= and chec5 orcon6igure the 'thernet inter6ace.

1. Select KEt*ernetCon5iguration.

2. Kes ,ust 7e

tic5ed i6 thee>uip,ent is a%ate=ay +'

*t is necessary to ena7le the 'thernet inter6ace only in the gate=ay +'.

*n case o6 pure OS* 3C+ T(+ net=or59 no */ con6iguration is re>uired.








Step < chec5 the '(LJs processes

RetiHStac5

',li,s< E#&I#A#Q3 6or O(S+9 1&(S and 12L(

R!.0A and earlier

E#&I#8CQ3 6or O(S% E1"8(CC and 1" L%F

The +' creation 6or, gives the operator theopportunity to select hi,sel6 a particular '(L-*(. :ro, /rocess (onitoring Control< The su66iH o6 the RetiHStac5Js su7-processes

suggests the Supervision Area na,e

'(L do,ain ,ust 7e chosen a,ong the K'(LHHH! processes

:or the Syste, Ad,inistrator< 7y ,eans o6 the Syste, Con6ig9 con6igure the 6ollo=ing ite,s<

A Supervision Area lin5ed to the Syste,Js 'thernet inter6ace Ee.g. lan0F A +eco, Su7syste, associated to this Supervision Area

An '(L*( associated to the sa,e Supervision Area<

'(L*(A3(! 6or O(S+9 1&(S and 12L( R!.0A and earlier

'(L*(3DC! 6or 1"8(CC and O(S%

N9: Re6er to Ad,inistrator %uide 6or details








Step < +' creation

1. :ro, the (S-%*9Select ,Create NE.

K3irectory see notes

*6 the operator doesnJt select the Supervision Area and the '(L 3o,ain9 the a7ove procedure leads to an

auto,atic choice o6 the Supervision Area and '(L-*( ,ade 7y the '(L. *n this case9 the syste, ta5esinto account o6 each availa7le K'(L*(HHH! '(L-*( trying to ,a5e their load ho,ogeneous.

1!0O(S provides '(L :ederation< a nu,7er o6 '(L instances can run on presentation server9 7ut theyare ;oined in one single application contri7utions to the operator.

The K3irectory 6ield re6ers to the /hysical +et=or5 (anage,ent %* server E/+(*(F o6 the '(Linstance in =hich the +' ,ust 7e created. +or,ally there is only one '(L instance installed in a1!0O(S Syste, thus9 the 6ield is auto,atically 6illed =ith the proper value. *6 ,ore than one '(Linstances are present in a :ederation9 the operator ,ust select the desired /+( %* Sever 6ro, thedrop-do=n list Esee the picture 7elo=F.

Section ! (odule 1 /age !"







Step "< +' address in '(L

2. Right clic5the created+'

1. Retrieve the list o6the +'s. Select,Net+or0

Eleents.

!. Select ,SetNE Address.






3 ·1 ·3(CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Step "< +' address in '(L ?cont.@

Assign the +SA/ =ritten in theLocal Con6iguration ,enu o6 the'>uip,ent $ie= EStep 1F.Clic5 ,-;. or ,Appl).

The +' address can 7e ,odi6ied only i6 the +' is not supervised Ei.e. its supervision state is K3eclaredF.

Section ! (odule 1 /age !&





3 · 1 ·4'CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

'Hercise

*6 availa7le on the training plat6or,9 declare a ! +'.

Supervise the +'.

Chec5 that the +' is reacha7le

Ti,e allo=ed< 10 ,inutes







Creating and addressing *SA 7oards








*SA 7oards and '(L inter=or5ing

4CN4CN

E#&

S+(/

'(L-*(

!

'(L-*(

*SA 4oard

O(S+Js'>uip,entController








Co,,unication 7et=een '(L and *SA 7oards

-#SN

-#SN +it* ISA

'(L

&AN

,IP over-SI. tunnel

CC

-SI or Q3IP orSN#P

*/QOS* 3C+

,IP over-SI. tunnel

'(L

&AN

-SI or Q3

,IP over -SI. or SN#P

CC

OS* 3C+

The K*/ over OS* tunneling eHploited 7y '(L ai,s at< Meeping OS* 3C+ 7ac57ones :ully eHploiting the OS* 3C+ resilience Supporting S+(/ tra66ic toI6ro, *SA 7oards =itha single e2e tunnel

*SA 7oards EAT(9 'S19 'S9 'S19 'S-9 /R'AF in the e>uip,ent are ,anaged 7y ,eans o6 S+(/

ESi,ple +et=or5 (anage,ent /rotocolF9 =hich is an application o6 the TC/I*/ re6erence ,odel.To ,anage the S3 6eatures o6 the +' and *SA 7oards together9 it is necessary to encapsulate S+(/,essages inside the OS* layers E*/ over OS* tunnelingF. *n this =ay the S+(/ ,anage,entin6or,ation is transported over the eHisting S3 net=or5s.

The OS enters the net=or5 ,anage,ent ,essaging over an 'thernet lin5 E*'''-802.! protocolF o6 a%+' here the ,essages are transported over the S3 3CC lin5s 7y ,eans o6 the LA/3 protocol at there,ote ,anaged nodes9 the ,essages are ac5no=ledged as 7elonging to<

OS* re6erence ,odel9 6or S3 ,anage,ent

S+(/ E*/F re6erence ,odel 6or *SA 7oards ,anage,ent

The encapsulation o6 S+(/ ,essages inside the OS* layers can 7e carried out 7y the OS itsel6< in thiscase the tunnel end-points are the +' and the OS.

The operator ,ust provide the tunneling con6iguration only in the +'s =hich are the end-points o6 thetunnel.

*SA< *ntegrated Service Adapter

3C+< 3ata Co,,unication +et=or5

3CC< 3ata Co,,unication Channels

LA/3< Lin5 Access /rocedure on 3-channels








/rocedure 6or */QOS* 3C+

+' con6iguration1. Con6igure the */ address o6 *SA

2. Con6igure the */ /oint-to-/oint inter6ace!. Con6igure the K*/ over OS* tunnel to=ard another +'

. Con6igure the */ address o6 the 'thernet inter6ace into the %+'

'(L con6iguration1. Chec5 that an K'(L*(COR4AS+(/ process has 7een instantiated in the

'(L

2. Create the *SA 7oard

!. Create the */ routing in the '(L








/rocedure 6or OS* 3C+

+' con6iguration1. Con6igure the */ address o6 *SA

2. Con6igure the */ /oint-to-/oint inter6ace!. Con6igure the K*/ over OS* tunnel to=ard the '(L

. Con6igure the */ static routing

'(L con6iguration1. Chec5 that an K'(L*(COR4AS+(/9 the Kositunneling and the

KOS*#(anager processes have 7een instantiated


!. Create the K*/ over OS* tunnel to=ard the O(S+ and add the *SA 7oard tothe created K*/ over OS* tunnel








Step 1< */ address o6 *SA

Open the '>uip,ent $ie=and chec5 or con6igure the*SA address. This address

=ill 7e set in '(L9 too.1. Select the

*SA 7oard

2. Select,ISA

9oard IP Address.

!. */ Addresso6 *SA








Step 2< /oint-to-/oint inter6ace

Open the '>uip,ent $ie= andchec5 or con6igure the */ addresso6 the /oint-to-/oint inter6ace

1. Select ,IP AddressCon5iguration o5 Point< %o<Point Inter5aces.

2. */ Address

Section ! (odule 1 /age "







Step !< K*/ over OS* tunnel into the O(S+

Open the '>uip,ent $ie= and chec5 orcon6igure the K*/ over OS* tunnels

1. Select ,IP-ver-SI.

2. +SA/ address o6< '(L9 in case o6 OS* 3C+ another O(S+9 in case o6 */QOS*

3C+

!. */ Routing< K+one in case o6 OS* 3C+ KOS/: in case o6 */QOS* 3C+






3 ·1 ·4(CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Step < Eonly 6or OS* 3C+F */ static routing

Open the '>uip,ent $ie= and chec5or con6igure the */ Static Routing

1. Select ,IP

Static outingCon5iguration .

2. *nsert the */ Address o6 the tunnel

de6ined in the '(L Syste,con6iguration Eas5 the Syste, Ad,inistratorF

!. Select ,C&NP %unnel. and selectthe tunnel =hose destination +SA/ isthe '(LJs one

Section ! (odule 1 /age &





3 ·1 ·5'CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Step <Eonly 6or */QOS* 3C+F 'thernet inter6ace con6iguration

Open the '>uip,ent $ie= o6 the%ate=ay +' and chec5 or con6igureits 'thernet inter6ace

1. Select ,Et*ernetCon5iguration.

2. */ Address








Step < chec5 the '(LJs processes

OS* 3C+ RetiHStac5

Stac5Services< ositunneling ',li,s< '(L*(COR4AS+(/ Osi(anager

*/QOS* 3C+ RetiHStac5 ',li,s< '(L*(COR4AS+(/

RetiHStac5

ositunneling

'(L*(COR4AS+(/

Osi(anager

:or the Syste, Ad,inistrator< 7y ,eans o6 the Syste, Con6ig9 con6igure the 6ollo=ing ite,s =hen

dealing =ith a pure OS* 3C+< A Supervision#Area Ee.g. pri,aryF lin5ed to the Syste, 'thernet inter6ace Ee.g. lan0F

A +eco,#Su7Syste, associated to this Supervision#Area

A Supervision#Area Ee.g. virtualF dedicated to the K*/ over OS* Tunnel

An OS*#(A+A%'R and an ositunnel associated to the Kvirtual Supervision#Area

An '(L*(COR4AS+(/ associated to the Kvirtual Supervision#Area

+.4.< Kpri,ary and Kvirtual are only speci,ens used to eHplain the roles o6 the t=o supervision areas.The ad,inistrator is 6ree to give any other na,e to the processes involved.








Step "< *SA 7oard creation in '(L

1. Select the O(S+ thatcontains the *SA 7oardand right clic5

2. Actions Create ISA








Step "< *SA 7oard creation in '(L ?cont.@

*/ address o6 *SA

'(L*(COR4AS+(/

O(S+

*SA

Add On Tunnel Eonly 6or OS*3C+F<- creates the tunnel in the '(L- associates the *SA to the tunnel








Step 8< Eonly 6or OS* 3C+F K*/ over OS* tunnel in the '(L

To dou7le chec5 that the tunnel creation in '(L is succes6ul<

1. Retrieve the Tunnel list<

Search '(L Tunnel %et */ Over OS* Tunnels

2. 3ou7le chec5 that the *SA 7oard is associated to the Tunnel<

Select the Tunnel Search %et +'s in Tunnel

Tunnel *3< the Syste, *3 o6 the O(S+Js +SA/









*nstead o6 creating auto,atically the tunnel along =ith the *SA 7oardcreation9 itJs possi7le to create ,anually the tunnel.


2. Create the Tunnel

!. Associate the *SA 7oard to the Tunnel

4et=een an +' and '(L thereJs ;ust one K*/ over OS* Tunnel

The Tunnel is eHploited 6or all the +'Js *SA 7oards









To create the Tunnel<

Actions '(L Tunnel Create */ over OS* Tunnel

%ate=ay Type P %ate=ay Enot the case o6 O(S+ Q *SAF<

it is used to create an */ Over OS* tunnel to an */ 7ased +' to ,anage +'s connected there a6ter.

the list o6 +'s =hich support %ate=ay */ Over OS* are given in this serverJs 6ile<

IusrISyste,sIU'(L#*S+TA+C'VIOS*T+Icon6I%ate=ay+eTypeRelease3e6inition.

Nhen this training guide =as developed9 the suita7le +'s =ere<

180TSS-!20I10< 1.1 W !.

180TSS-100< 1.1 W !.1

180TSS-1< 1.0

180TSS-< .0 W ".0

1&2(S'< 1. - !.

1&(S< !.0 1"8(CC< 2.0 W .

18!0/SS-1< 1.0 W 1.1

%ate=ay Address< +'Js */ address auto,atically 6illed in.

%ate=ay OS*I+SA/ Address< to 7e populated 7y the operator.






3 · 1 · 5"CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.



To associate the *SA to the Tunnel<

1. Retrieve the Tunnel list<

Search '(L Tunnel %et */ Over OS* Tunnels

2. Select the Tunnel Actions Add */ To Tunnel

see neHt slide






3 · 1 · 5$CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.








3 · 1 · 5(CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.



To delete the Tunnel<

1. Re,ove the *SA 7oard associated to the Tunnel

2. 3elete the Tunnel

*tJs possi7le to deletethe Tunnel only i6 it has

no *SA 7oard






3 ·1 ·'CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Step &< Eonly 6or */QOS* 3C+F */ routing in '(L

Static routing

the +*D Kroute co,,and isused. *t allo=s to declare thenet=or5 =here the *SA 7oardsare located and to declare therelationship =ith the gate=ay.

route add net Unet=or5Vnet,as5 U,as5V Ugate=ayV 1

route add net 10.10.0.0net,as5 2.2.0.011.&8.!!.8" 1

3yna,ic routing

the Open Shortest /ath :irstEOS/:F protocol has 7eenchosen 6or eHchanging therouting in6or,ation a,ongthe routers and the OSservers.

*tJs a ,atter o6 Syste,con6iguration

as5 the Syste, Ad,inistrator=hether it is ena7led.






3 · 1 ·1CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

'Hercise

*6 availa7le on the training plat6or,9 declare an *SA 7oard.

3eclare the */ over OS* tunnel








Creating and addressing a % ! +'

(anage,ent o6 % ! e>uip,ent

! ,anage,ent agent

180 TSS-!20 R1.1IR1. as /TR/12L( R.0HIR.0H

% ! /TR/ +'

Q3 Agent

% ! (S// +'

Q3

Agent

SN#P

Agent

! and S+(/ ,anage,ent agents

180 TSS-!20 R1.1IR1. as (S// or /T+180TSS-0 R.H

The 180 TSS-!20 can 7e con6igured in three di66erent 6lavors9 7ased on the o66ered transport

capa7ilities</ure TRansport /lat6or, E/TR/F9 providing pure T3( and N3( transport capa7ility

(ulti-Service /rovisioning /lat6or, E(S//F9 providing the capa7ility o6 integrating transport o6 T3(and data tra66ic

:ull 3ata or /ac5et Transport +' E/T+F9 providing only data tra66ic capa7ility

/TR/ E/ure TRansport /lat6or,F< T3( and N3( transport capa7ility

(S// E(ulti-Service /rovisioning /lat6or,F< transport o6 T3( and data tra66ic

/T+ E/ac5et Transport +'F or :ull 3ata< only data tra66ic capa7ility






3 · 1 · CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

.1 % ! +' in /TR/ con6iguration






3 ·1 ·"CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

.1 % ! +' in /TR/ con6iguration

Creating a % ! +' in /TR/ Con6iguration

% '(L-*('(L Coordinator

! /rotocoladapter

S+(/ /rotocoladapter

% ! +' /TR/Q3 Agent

!

An ,E#&I#4!. ust be c*osen as E#&<I#

*n this con6iguration9 only the ! co,,unication session needs to 7e esta7lished 7et=een the '(L and

the +'.There6ore9 a ! 3C+ is needed in order to ,anage the e>uip,ent.






3 · 1 · $CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

.2 % ! +' in (S// con6iguration






3 ·1 ·"'CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

% '(L-*('(L Coordinator

! /rotocoladapter

S+(/ /rotocoladapter

E#&


OS* 3C+

Nhen a pure OS* 3C+ is availa7le9 the S+(/ ,anage,ent session ,ustrun over an K*/ over OS* tunnel con6igured 7et=een the '(L and the +'.

TSS-!20 (S//

Q3 Agent

SN#P Agent

! session

S+(/ session E*/ tra66icF

OS* 3C+

*/ over OS*Tunnel

*/ over OS* tunnelEit encapsulates */ tra66ic in OS* tra66icF

Section ! (odule 1 /age "0





3 ·1 ·"1CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


OS*Q*/ 3C+

Nhen an OS*I*/ 3C+ is availa7le9 7oth the ! and the S+(/ ,anage,entsessions can conte,porarily run over the sa,e net=or5 in6rastructure.

%'(L-*('(L Coordinator

! /rotocoladapter

Q3 Agent

%SS<32'

SN#P Agent

%SS<3%SS<32'

! session EOS* tra66icF

S+(/ session E*/ tra66icF

OS*I*/ 3C+








*/ over OS* tunnel

'(L

&AN

CC supporting-SI

=

,IP over -SI.

tunnel

-SI or Q3IP orSN#P

*/QOS* 3C+

,IP over-SI. tunnel

'(L

&AN

-SI or Q3 ,IP over -SI. or SN#P

CC

OS* 3C+

-

CC supporting-SI=IP

,IP over-SI. tunnel

CC

CCsupporting

-SI








/rocedure 6or OS*Q*/ 3C+

+' con6iguration 7y ,eans o6 Cra6t Ter,inal<1. Con6igure the Local +' OS* address E+SA/F

2. Con6igure the Local +' */ address!. Con6igure the LA/3 inter6aces

. Con6igure the OS address in the +'

. Con6igure the 'thernet inter6ace

'(L con6iguration1. Chec5 the '(L con6iguration and processes status

2. Create the +'

!. Set the addressEesF o6 the created +'

Section ! (odule 1 /age "!







Step 1< OS* address o6 the +'

4y CT9 open the '>uip,ent $ie= andchec5 or con6igure the +' +SA/address. This address =ill 7e set in'(L9 too.

1. Select ,&ocalCon5iguration -SI Con5iguration.

2. +'Js OS* addressE+SA/F






3 ·1 ·"$CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Step !< LA/3 con6iguration ?cont.@

*n case o6 OS* 3C+<,-SI.

*n case o6 KOS*Q*/ 3C+Ealso valid in case o6

KOS* 3C+F<,-SI and IP. K*ntegr*S-*S






3 ·1 ·"(CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Step < OS* address o6 the OS

:irst o6 all9 as5 the Syste, Ad,inistrator 6or the OSJs+SA/. Then9 7y CT9 open the

'>uip,ent $ie= and chec5 orcon6igure the OS address.

1. Select ,-SCon5iguration.

2. OSJs addressE+SA/F

Section ! (odule 1 /age "&





3 ·1 ·$'CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Step < 'thernet inter6ace con6iguration

1. Select ,Et*ernetCon5iguration.

2. ,7es. ,ust 7e tic5ed

!. +et=or5 /rotocol GG.-SI. 9 in case o6 OS* 3C+

G.-SI and IP. 9 in case o6 */QOS*3C+

. Only in case o6 */QOS*3C+<

set the */ addresstic5 ,IntegrIS<IS.






3 ·1 ·$3CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Step 8< chec5 the '(LJs processes

OS* 3C+

RetiHStac5

Stac5Services< ositunneling ',li,s< '(L*(%

Osi(anager

*/QOS* 3C+

RetiHStac5

',li,s< '(L*(%

RetiHStac5

ositunneling

'(L*(%

Osi(anager

:or the Syste, Ad,inistrator< 7y ,eans o6 the Syste, Con6ig9 con6igure the 6ollo=ing ite,s<

-SI=IP CN A Supervision#Area lin5ed to the Syste, 'thernet inter6ace Ee.g. lan0F


An '(L*(% associated to the sa,e Supervision#Area

-SI CN

A Supervision#Area Ee.g. pri,aryF lin5ed to the Syste, 'thernet inter6ace Ee.g. lan0F


A Supervision#Area Ee.g. virtualF dedicated to the */ over OS* Tunnel

An OS*#(A+A%'R

An ositunnel associated to the Kvirtual Supervision#Area

An '(L*(% associated to 7oth the Kpri,ary and the Kvirtual Supervision#Area

+.4.< Kpri,ary and Kvirtual are only speci,ens used to eHplain the roles o6 the t=o supervision areas.The ad,inistrator is 6ree to give any other na,e to the processes involved.

Section ! (odule 1 /age 8!





3 ·1 ·$CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Step 10< +' addressEesF in '(L ?cont.@

3/ /ort is al=ays 11 ES+(/F






3 ·1 ·$"CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.



Re6er to K Creating and addressing *SA 7oards chapter






3 · 1 ·$$CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

'Hercise

*6 availa7le on the training plat6or,9 create and address a % ! +'







3 · 1 · $(CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

" Creating and addressing an S+(/ +'

Section ! (odule 1 /age 8&





3 ·1 ·(1CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.



A Supervision#Area lin5ed to the

Syste, 'thernet inter6ace Ee.g. lan0F An '(L*(COR4AS+(/ associated to

the sa,e Supervision#Area

'(L*(COR4AS+(/

Section ! (odule 1 /age &1







Step !< +' creation

1. Select KCreate NE.

K3irectory See +otes


auto,atic choice o6 the Supervision Area and '(L-*( ,ade 7y the '(L. *n this case9 the syste, ta5esinto account o6 each availa7le K'(L*(COR4AS+(/ '(L-*( trying to ,a5e their load ho,ogeneous.

4e care6ul to chec5 that the selected '(L-*( is suita7le 6or */ 3C+9 that is to say it ,ust 7e associatedto a Supervision Area 7elonging to the Syste, 'thernet *nter6ace


The K3irectory 6ield re6ers to the /hysical +et=or5 (anage,ent %* server E/+(*(F o6 the '(Linstance in =hich the +' ,ust 7e created. +or,ally there is only one '(L instance installed in a1!0O(S Syste, and the 6ield is auto,atically 6illed =ith the proper value. *6 ,ore than one '(Linstances are present in a :ederation9 the operator ,ust select the desired /+( %* Sever 6ro, thedrop-do=n list Esee the picture 7elo=F.








Step < +' address in '(L

!. Select ,Actions Set NE Address.

1. Retrieve the list o6 the +'. Select,Net+or0 Eleent.

2. Right clic5 the +'

Section ! (odule 1 /age &!







Step < +' address in '(L ?cont.@

Nrite the */ address o6the +' and the 3/ portdedicated to S+(/ E11F

The +' address can 7e ,odi6ied only i6 the +' is not supervised Ei.e. in the K3eclared stateF.






3 · 1 · (5CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

".1 &00(DC






3 ·1 ·(CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

".1 &00(DC

/rere>uisites

&00(DC +' can 7e created and correctly supervised only i6 the 6ollo=ingprocesses have 7een con6igured and are running on the '(L Syste,<

A Supervision#Area lin5ed to the Syste, 'thernet inter6ace Ee.g. lan0F

A &00(DC '(L*( associated to the sa,e Supervision#Area

Chec5 the correct con6iguration and process status =ith the Syste, Ad,inistrator

/lease re6er to the speci6ic +' docu,entation 6or in6or,ation a7out the local +' address con6iguration

procedures.






3 ·1 ·("CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

".1 &00(DC

+' creation

1.Select,Create NE.

K3irectory see notes


auto,atic choice o6 the Supervision Area and '(L-*( ,ade 7y the '(L. *n this case9 the syste, ta5esinto account o6 each availa7le K&00(DC '(L-*( trying to ,a5e their load ho,ogeneous.

4e care6ul to chec5 that the selected '(L-*( is suita7le 6or */ 3C+9 that is to say it ,ust 7e associatedto a Supervision Area 7elonging to the Syste, 'thernet *nter6ace.



Section ! (odule 1 /age &"





3 ·1 ·($CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

".1 &00(DC

+' address in '(L


!. Select ,Action Set NE Address.

1. Retrieve the list o6 the+'. Select ,Net+or0Eleent.






3 ·1 · 1'1CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

8 Creating and addressing a % TL1 +'






3 ·1 · 1'2CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Overvie=

So,e +'s that are ,anaged 7y '(L via the S+A '(L-*( processes are<

1S(IC 18!0/SS-19 18!0/SS-9 18!0/SS-19 18!0/SS-!2

180TSS-9 180TSS-1009 180TSS-109 180TSS-!20 R!IR

18"0TTS

4oth the TL1 and the S+(/ ,anage,ent ,odels run over an */ net=or5layer. So9 an */ 3C+ is needed to supervise % TL1 +'s. *6 OS* protocol is ena7led in the +'9 the +SA/ o6 the +' ,ust 7e a valid

address








Overvie= ?cont.@

The ne= releases o6 so,e types o6 +'s support the security ,anage,ent.

180TSS-1009 6ro, R!.2

180TSS-!209 6ro, R.0 18!0/SS9 6ro, R!..2

Security is con6igured in the KSet +' address =indo=

i6 the +' supports security9 the =indo= provides its con6iguration

i6 the +' doesnJt support security9 the =indo= doesnJt provide its con6iguration.

:or details a7out security9 re6er to the last chapter o6 this student guideJs,odule< K1 Security in AL net=or5s







8.1 Creating and addressing an 180TSS

/rocedure

/reli,inary +' con6iguration 7y ,eans o6 Cra6t Ter,inal EY*CF The S*3 ESource *3enti6ierF o6 the Local +' ,ust 7e con6igured Esee notesF

The */ addresses o6 the local +' Eusually the 3C+ inter6ace address and the+' addressF ,ust 7e con6igured9 along =ith the routing settings necessary to,a5e the +' reacha7le 7y the '(L /lease re6er to the speci6ic +' docu,entation 6or details a7out the local +'

con6iguration procedures

'(L con6iguration1. *6 needed9 con6igure the routing settings necessary to ,a5e the +'

reacha7le 7y the '(L

2. Chec5 the '(L con6iguration and process status

!. Create the +'. Con6igure the +' address in '(L

SI Eor %I W Target *3enti6ierF is a string o6 up to !2 E6or 'TS*F or 20 E6or A+S*F non case-sensitive

alphanu,eric characters9 including the hyphen E-F character9 or a >uoted string o6 up to !2 E6or 'TS*F or20 E6or A+S*F characters9 including any special character. *6 it is a non->uoted string9 SI >or %I?ust start +it* a letter and end +it* an alp*anueric c*aracter. Consecutive hyphens E-F shallnot 7e allo=ed. +u,7er o6 hyphens shall not 7e greater than 6our.






3 ·1 · 1'"CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


/reli,inary +' con6ig. 7y Y*C< */ addresses W 180TSS-100

Co,,u. Local address

LA+Js */address

+'Js */ address






3 ·1 · 1'$CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


/reli,inary +' con6ig. 7y Y*C< */ addresses W 180TSS-!20

Co,,unication 3C+ /hys. *6 */ Address

Co,,unication 3C+ /hys. *6 LA+ ,anag LA+Js */

address

+'Js */ address






3 ·1 · 111CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.





1. Retrieve the list o6 the+'s. Select ,Net+or0Eleents.









Assign the address o6 the TL1Epri,aryF inter6ace in the 6or,at<

IP Address:%&1 Port E!082 or!08!F. The TL1 port is not,andatory.The /ri,ary ser *3 and /ass=ord,ust ,atch =hat con6igured in the+' Esee neHt slide 6or detailsF

Leave the ,!NE @lag. E[F andthe ,@%A#. E[[F para,eters totheir de6ault values

The T*3 ,ust 7e e>ual to theS*3 con6igured in the +'E[[[F

*t is sho=nonly i6 the +'supports SS2

E[F The K%+' :lag ena7les a TL1 co,,and line inter6ace operator to act on a Re,ote +' ER+'F through

a Telnet access to the %ate=ay +' E%+'F. This 6eature is applica7le only to the A+S* environ,ent.E[[F *l the K:TA( para,eter is set to Kse %N9 the +' under creation can 7e used as a repository todo=nload the SN to its Re,ote +'. This 6eature =ill 7e availa7le in 6uture releases.

E[[[F T*3 P Target *3enti6ier Ei.e. the +' identi6ier used in the ,essages eHchanged 7et=een the +'and the '(LF. *t ,ust 7e e>ual to the KSource *3enti6ier ES*3F set into the +'.

SI Eor %IF is a string o6 up to !2 E6or 'TS*F or 20 E6or A+S*F non case-sensitive alphanu,ericcharacters9 including the hyphen E-F character9 or a >uoted string o6 up to !2 E6or 'TS*F or 20 E6or

A+S*F characters9 including any special character. *6 it is a non->uoted string9 SI >or %I? uststart +it* a letter and end +it* an alp*anueric c*aracter. Consecutive hyphens E-F shallnot 7e allo=ed. +u,7er o6 hyphens shall not 7e greater than 6our.

The +' address can 7e ,odi6ied only i6 the +' is not supervised Ei.e. in the declared stateF.

S+(/ address setting is not re>uired.








/ri,ary ser *3

K/ri,ary ser *3 ,ust ,atch a user de6ined in the +'.

(a5e sure that it has 7een con6igured in the +' =ith the K+OT(OT para,eter ena7led9 that ,eansthat the user session inactivity ti,eout is not ta5en in account 6or that user.

*6 not9 a6ter the eHpiration o6 the session inactivity ti,eout the +' status =ill s=itch to<

KCo,,unication state P nreacha7le

K+' Reacha7ility P nreacha7le

leading to the +' isolation.

Also9 ,a5e sure that K/ri,ary ser *3 con6igured in the +' is dedicated to the 1!0O(S access.

/lease re6er to the '>uip,ent training docu,entation 6or details a7out the user account con6igurationprocedures.






3 ·1 · 11"CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

8.2 Creating and addressing an 18!0/SS

/reli,inary +' con6iguration< chec5 the S*3

Access to the local +' 7y *nternet 'Hplorer.*n the ,S)ste. tag9 chec5 that a valid +et=or5 'le,ent+a,e ES*3F has 7een given to the +' Echec5 the site

docu,entationF






3 ·1 · 11(CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


/reli,inary +' con6iguration< OA(/ Address

1. *n the resourcetree9 select the,-A#P. tageHpanding the

KSR/+L

2. Assign the OA(/ */address and su7net,as5 Echec5 the sitedocu,entationF.

'na7le the port 7ytic5ing on the K/ort'na7led 7oH.






3 ·1 · 12'CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


/reli,inary +' con6iguration< OS/: settings o6 the OA(/ /ort

1. *n the resourcetree9 select the,-A#P. tageHpanding the

KSR/+L 2. Assign the OS/:para,eters asreco,,ended 7ythe net=or5ad,inistrator








/reli,inary +' con6iguration< */ routes

1. Select ,Net+or0ing IP outes. toopen the related =indo=. ,-SP@ Areas. is 6or OS/: con6iguration9 i6 auto,aticrouting is re>uired.

2. Assign the OA(/ */address and su7net,as5. 'na7le the port7y tic5ing on the

K/ort 'na7led 7oH

2. Clic5 on ,Create. to create*/ static routes Echec5 thesite docu,entationF








+et=or5 reacha7ility< connectivity details

Optical Supervisory Channel EOSCFConnectivity ses 110 n, optical channel9

,ultipleHed onto C-4and tra66ic channels7y OSC ,odule on a,pli6ier card

/rovides \100 (7ps connection 7et=een+'s

+' runs OS/: on OSC inter6aces so that6ull ,anage,ent connectivity =ill 7e,aintained during 6i7er cut

%ate=ay +et=or5 'le,ent E%+'FConnectivity An +' that connects to a custo,er data

net=or5 through its OA(/ port

ses 'thernet ca7les A de6ault route ,ust 7e con6igured7et=een the +' and the neigh7or router

-SP@outingDCN

Inter-NECommunication

IP

1350OMS

Static Route via

DCN

(OSC)








+et=or5 reacha7ility< connectivity options W 'Ha,ple 1

'ach +' is connected to the ,anage,ent net=or5 through the OA(/ LA+ port

The OA(/ LA+ port supports 10I100 and auto-negotiates accordingly Con6igure the 6ollo=ing attri7utes on each +'<

OA(/ */ address

OA(/ */ address ,as5

3e6ault router */ address

1. 3irect connection through the OA(/ LA+ port

Client /C Client /C1!0O(S Server








+et=or5 reacha7ility< connectivity options W 'Ha,ple 2

One +' selected as the gate=ay E%+'F

1!0O(S access via the %+'

OSC 6or inter-+' co,,unications %ate=ay +' con6iguration

OA(/ */ address and ,as5

3e6ault route E=hich is redistri7utedF

+' loop7ac5 */ address and ,as5

Con6iguration o6 other +'s

+' loop7ac5 */ address and ,as5

Router con6iguration

static route 6or the +' loop7ac5 */ address su7net

2. Single %+' =ith static route

Node1 Node3

Node2

Client PC 1350OMS Server

Client PC

Management Network

Router

Router







Local CraftPC:

Web / CLI

Node #1

PhMServr

PCClient

10.10.0.4

172.16.0.1 DHCP-assigned

(typically172.16.0.2)

CIT Port

Node Loopback IP Addresses

D C N R o u t er ( s )

10.10.05

1350OMS Server152.148.66.xxx

PC Client152.148.66.xxx

OAMP Port152.148.66.xxx

Node #5

Node #4

Node #3Node #2

GNE Router152.148.66.xxx

Router152.148.66.xxx

10.10.0.1

10.10.0.310.10.0.2

Node Loopback IP Addresses

OSCConnectivity


+et=or5 reacha7ility< connectivity 'Ha,ple








/rocedure Step !< +' creation

1. Select.CreateNE.

:a,ily P ,-%N. Type P ,1$3'PSS<.


auto,atic choice o6 the Supervision Area and '(L-*( ,ade 7y the '(L. *n this case9 the syste, ta5esinto account o6 each availa7le K'(L*(S+A '(L-*( trying to ,a5e their load ho,ogeneous.

1!0O(S provides '(L :ederation< a nu,7er o6 '(L instances can run on presentation server9 7ut theyare ;oined in one single application contri7ution to the operator.







3 ·1 · 12$CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


/rocedure Step < +' address in '(L



1. Retrieve the listo6 the +'s. Select,Net+or0Eleents.






3 ·1 · 13'CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

'Hercise

*6 availa7le on the training plat6or,9 create and address a % TL1 +'


Section ! (odule 1 /age 1!0





3 ·1 · 131CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

& Creating and addressing a ! C+A +'







& Creating and Addressing a ! C+A +'

Step 1< +' creation

1. Select KCreate NE.

Leaving ,Supervision Area. and ,El 4oain.

unspeci6ied9 the syste, =illauto,atically choose thecorrect values a,ong thecon6igured processes


1!0O(S provides '(L :ederation< a nu,7er o6 '(L instances can run on presentation server9 7ut they

are ;oined in one single application contri7utions to the operator.The K3irectory 6ield re6ers to the /hysical +et=or5 (anage,ent %* server E/+(*(F o6 the '(L

instance in =hich the +' ,ust 7e created. +or,ally there is only one '(L instance installed in a1!0O(S Syste, and the 6ield is auto,atically 6illed =ith the proper value. *6 ,ore than one '(Linstances are present in a :ederation9 the operator ,ust select the desired /+( %* Sever 6ro, thedrop-do=n list Esee the picture 7elo=F.








Step 2< Set the +' address


1. Retrieve the list o6 the +'s.Select ,Net+or0Eleent.









Step 2< Set the +' address ?cont.@

,NSAP Selector. P01

Assign the OS* +SA/ addresso6 the con6igured +'


Section ! (odule 1 /age 1!"





3 ·1 · 13$CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

'Hercise

*6 availa7le on the training plat6or,9 create and address a ! C+A +'







3 ·1 · 13(CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

10 Creating and addressing a TL1 +'

Section ! (odule 1 /age 1!&






10 Creating and Addressing a TL1 +'

Overvie=

*n this chapter it is descri7ed ho= to create and address the K(etropolis 13(D and 1"L E6ro, the 6or,er Lucent port6olioF and the

terrestrial N3( e>uip,ent 12LD E6ro, the 6or,er Lucent port6olio9tooF.

This e>uip,ent is ,anaged 7y the ,%NA. '(L-*( process.

An */ 3C+ is re>uired to ,anage the K(etropolis TL1 e>uip,ent.

T+A< TL1 +et=or5 Adapter








/rocedure

/reli,inary +' con6iguration 7y ,eans o6 Cra6t Ter,inal /lease re6er to the speci6ic +' docu,entation 6or in6or,ation a7out the local

+' con6iguration procedures

'(L con6iguration1. Chec5 the '(L con6iguration and process status

2. Create the +'

!. Con6igure the +' address in '(L









A Supervision Area lin5ed to the syste,'thernet inter6ace

An K'(*L(T+A process associated to the sa,esupervision area

'(L*(T+A

/lease re6er to the 1!0O(S-'(L Syste, Ad,inistration %uide 6or details a7out the Syste,

Con6iguration.








Step 2< +' creation

1. Select.CreateNE.



auto,atic choice o6 the Supervision Area and '(L-*( ,ade 7y the '(L. *n this case9 the syste, ta5esinto account o6 each availa7le K'(L*(T+A '(L-*( trying to ,a5e their load ho,ogeneous.










Step !< Set the +' address in '(L



1. Retrieve the list o6 the+'s. Select,Net+or0Eleents.








Step !< Set the +' address in '(L ?cont.@

Assign the address o6 the TL1 Epri,aryF

inter6ace in the 6or,at< IP Address:%&1Port E!082 or !08!F. The TL1 port is not,andatory.The /ri,ary ser *3 and /ass=ord ,ust,atch =hat con6igured in the +'.

Leave the ,!NE @lag. E[F andthe ,@%A#. E[[F para,etersto their de6ault values

The T*3 ,ust 7e e>ual to theS*3 con6igured in the +' E[[[F

E[F The K%+' :lag ena7les a TL1 co,,and line inter6ace operator to act on a Re,ote +' ER+'F through

a Telnet access to the %ate=ay +' E%+'F. This 6eature is applica7le only to a A+S* environ,ent.E[[F *l the K:TA( para,eter is set to Kse %N9 the +' under creation can 7e used as a repository todo=nload the SN to its Re,ote +'. This 6eature =ill 7e availa7le in 6uture releases.

E[[[F T*3 P Target *3enti6ier Ei.e. the +' identi6ier used in the ,essages eHchanged 7et=een the +'and the '(LF. *t ,ust 7e e>ual to the KSyste, *3enti6ier ES*3F set into the +'

SI Eor %IF is a string o6 up to !2 E6or 'TS*F or 20 E6or A+S*F non case-sensitive alphanu,ericcharacters9 including the hyphen E-F character9 or a >uoted string o6 up to !2 6or 'TS* E20 6or A+S*Fcharacters9 including any special character. *6 it is a non->uoted string9 SI >or %I? ust start+it* a letter and end +it* an alp*anueric c*aracter. Consecutive hyphens E-F shall not 7eallo=ed. +u,7er o6 hyphens shall not 7e greater than 6our.


S+(/ address setting is not re>uired.







'Hercise

*6 availa7le on the training plat6or,9 create and address a TL1 +'








11 Creating and addressing a %eneric +'


A Supervision#Area lin5ed to the Syste,'thernet inter6ace Ee.g. lan0F

An '(L*(S%( or an '(L*(COR4AS+(/Edepending on the !rd party e>uip,entFassociated to the sa,e Supervision#Area

'(L*(COR4AS+(/or

'(L*(S%(










1. Retrieve the list o6 the+'s. Select ,Net+or0Eleent.










Nrite the */ address o6the +' and the 3/ portE11F dedicated to S+(/








'Hercise

*6 availa7le on the training plat6or,9 create a generic +'

Ti,e allo=ed< ,inutes







12 +' auto discovery








/rinciples

+' auto discovery is a 6eature that ,a5es auto,atic the procedure o6creating a ne= +' in the '(L data7ase.

The +'s ,ust 7e reacha7le 7y '(L +'Js 3C+ para,eters already con6igured

There are three procedures9 according to the +' type the +' initiated procedure availa7le 6or % ! and % TL1 +'s.

the 1!20CT initiated procedure 6or ! +'s and *SA 7oards.

the procedure 6ully ,anaged 7y the 1!0O(S9 availa7le 6or 18!0/SS and&00(/R.

+' auto discovery procedure E7otto,-upF is any=ay co,pati7le =ith thetraditional top-do=n ,ethod9 =here ne= +'s are ,anually created on'(L.

+' auto discovery is availa7le 6or *SA 7oards9 too.








/rinciples ?cont.@

The discovery ,essages pass the 6ollo=ing in6or,ation< +' type Z release

+' na,e and location +' address

OS address Ei6 relevantF

The discovery ,essage is directly sent over the appropriate Layer ! ECL+S W also 6or *SA 4oards - or */F. +o application session is esta7lished7et=een the +' and '(L.

Since the ,essages go through the +'9 they eHploit the sa,e 3C+ routes

availa7le to '(L 6or supervising the +'.







12.1 +' initiated procedure

CT perspective

CN

1!20CTJs S(or

Y*C

+e= +'B

ACM

'(L

*n case o6 % ! or % TL1 +'s9 the auto discovery 6unction is directly eHploited 7y the +' itsel6.

The S(IY*C provides the KAuto discovery option9 =hich triggers the discovery ,essage directly 6ro,the +' to the '(L.








Nhat to do on +' E% ! +'F

1. Trigger the auto discoveryprocedure 7y issuing,Con5iguration #anageent Auto4iscover).








Nhat to do on +' E% ! +'F ?cont.@

2. *ssue ,Auto4iscover).B,enable.

!. Clic5 ,-;.

. Clic5 ,Cancel. toclose the =indo=

. Open again the Auto 3iscovery

=indo=< the Status is no=,succeeded.

. Nith ,Auto4iscover).B,disable. 9 clic5 OM tostop the procedure9 then ,Cancel.








Nhat to do on +' E% TL1 +'9 e.g. 180TSS-!20F

1. :ro, the local ter,inal9 issue,Counication

Net+or0 4oain -SI#ng -SI -S Address.

2. Select ,IP. Eor OS*F asOperating Syste,9 and insertthe */ Eor OS*F address o6 the1!0O(S server

*n this and the 6ollo=ing slides9 an eHa,ple is given on ho= to trigger the auto discovery procedure 6ro,

an 180TSS-!20 +'.:or other +'s 7elonging to the % TL1 ES+AF 6a,ily9 please re6er to the speci6ic e>uip,entdocu,entation.








Nhat to do on +' E% TL1 +'9 e.g. 180TSS-!20F ?cont.@

!. *ssue ,Counication NE Autodiscover).

. Choose ,7. in the,ENA9&E4. 7oHand the clic5 on,Save.

. Open again the Autodiscovery =indo=< theStatus is no=,S/CCEE4E4.







12.2 1!20CT initiated procedure








CT /erspective

*n-6ield engineers get the result o6 the auto discovery procedure 3*SCO$'R OM the auto discovery ,essage has 7een ac5-ed 7y '(L +OC

tea, is no= in6or,ed 3*SCO$'R MO the auto discovery ,essage has not 7een ac5-ed 7y '(L

Ti,e-out eHpiration< '(L not availa7le or 3C+ not OM

(essage re6used 7y '(L< +' TypeZRel. un5no=n9 duplicated +' address9 etc

CN

'(L

ACM

1!20CT+e= +'B

:or ! +'s and *SA 7oards9 the 1!20CT provides a 6unction dedicated to +' auto discovery.

+' address is retrieved 6ro, the +' con6iguration the list o6 target '(L is 7ased on a list o6 plat6or,na,es Eo66line editF to avoid the ,anual set-up o6 the OS address 6or every +'.








Nhat to do on CT

1. Select ,NE Autodiscover). or,NEA4 /pdate.

2. Select ,N#s addresscon5ig.

Narning< The +' Auto discovery 6eature is availa7le on the CT starting 6ro, CT-M Rel !.!








CT initiated procedure< Nhat to do on CT ?cont.@

1. *nsert theOS na,e

2. *nsert theaddress o6 theOS

!. 3o ,Add.

. The OS is putin the list

A3

The last t=o digits E+SA/ selectorF o6 the OS OS* address ,ust 7e KA3.








CT initiated procedure< Nhat to do on CT ?cont.@

1. Select ,NEA4 /pdate.

2. Select the +'

!. Select the OS

. *tJs possi7le tochange theLocation na,e

. 3o,Send.

. STAT'changes into

,sentsuccess5ull).






3 ·1 · 1$CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

12.! '(L procedure 6or ! and % +'s








Nhat to do on '(L

1. On receipt o6 the +' auto discovery ,essage co,ing 6ro, the +'9the Alar, (anage,ent application generates a Narning alar,.

2. Then9 the operator ,ust navigate 6ro, the auto discovery alar, to,CreateNE.2

!. The ,Create NE 4ialog. =indo= is presented to the operator.






3 ·1 · 1"'CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Nhat to do on '(L ?cont.@

2. Select the =arningand clic5 on,Eternal

Applications CreateNe.

1. *n the Alar,,anage,ent

Application9 select the,NE Auto

4iscover). Su7list

Section ! (odule 1 /age 1"0





3 ·1 · 1"1CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Nhat to do on '(L ?cont.@

!. Choose or leaveunspeci6iedSupervision Areaand '(L do,ain. Clic5 on Create

The +' can also 7e re6used

1. Clic5 on Theauto discovered+' selected inthe previousvie=

2. Optionally9

the operatorcan ,odi6ythe ,NEnae. orthe,&ocationnae.






3 ·1 · 1"2CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

12. 18!0/SS and &00(/R Autodiscovery /rocedure







12. 18!0/SS and &00(/R Auto discovery /rocedure

/rocedure

Prereuisites< The %ate=ay +' ,ust 7e ,anually created and supervised in '(L.

The Re,ote +'s to 7e discovered ,ust 7e reacha7le 7y '(L.

Procedure<1. *n the +' List9 select the %ate=ay +'9 right clic5 and issue ,Actions

4iscover NE. < the 3iscover +' Niard is opened.

2. Optionally enter a 6iltering criteria in ter,s o6 a list o6 */ AddressI*/ (as5pairs.

!. Clic5 ,Net. and trigger the K%et Auto 3iscovered +' process< =ait 6or itsco,pletion.

. Clic5 ,Net. and trigger the Auto,atic +' Creation< the previously

discovered +'s are created into the '(L data7ase.. Chec5 that +'s have 7een actually created.

Section ! (odule 1 /age 1"!







Step 1< *ssue the 3iscover +' Niard

1. *n the +et=or5 'le,ent List9select the %+' and issue,Actions 4iscover NE.

2. The K3iscover +' =iard is opened

Section ! (odule 1 /age 1"v







Step 2< Optional :ilter

1. Optionallyinsert an */

AddressI*/(as5 pairas 6ilteringcriteria

2. ,Net.D totrigger thediscovery

The operator is optionally allo=ed to enter a 6iltering criteria de6ined in ter,s o6 a list */ AddressI(as5

pairs.Only the 6iltered list o6 +' 7elonging to the Ksu7nets de6ined 7y any o6 the ,as5s =ill 7e given 7ac5 tothe %*.

*n case o6 the operator is not 6illing in any 6iltering criteria9 the discovery scope =ill consist o6 the overallsu7set o6 18!0/SS net=or5 ele,ents that are reacha7le 6ro, the +' =here the action is triggered.








Step !< 3iscover +'

1. The 3iscovery process is triggered 7yclic5ing on ,Net. in the previous step.Nait 6or the discovery process to 7eco,pleted Echec5 in the operation logF.

2. A6ter the co,pletion9 thediscovered +'s are sho=n inthis ta7le. The user canre,ove +'s not to 7e created7y selecting the, and clic5ing

on the Kred cross. The user can a7ort the process7y clic5ing on this 7utton

The discovered +'s arecreated =ith the Location+a,e o6 the %+'

!. ,Net.D to trigger the creation

+.4.< The discovery process can last several ,inutes9 depending on the nu,7er o6 +'s to 7e discovered.

Location +a,e and Supervision area are populated 7ased on the gate=ay +' 7y =hich the process has7een started.

*n case an ]A7ortJ re>uest is issued9 the +'s discovered up to the ti,e the discovery =as interrupted can7e created 7y clic5ing on K+eHt.






3 ·1 · 1""CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


Step < Create +'

1. The auto,aticallycreated +'s are sho=nin this ta7le.

2. Chec5 in the +' List thatthe ne= ones have 7eencreated. 'ventually changethe location na,e9 chec5

their address9 ser *3 and/ass=ord and startsupervision

The address and ser *3 and pass=ord o6 the auto discovered +'s are auto,atically set during the

discovery procedure. Address is set 7ased on the in6o sent 7y the discovered +'s.

ser *3 and pass=ord are the sa,e as the ones o6 the %ate=ay +'.

Section ! (odule 1 /age 1""





3 ·1 · 1"$CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1! Addressing the +'s =ith KOS* over*/ tunnel






3 ·1 · 1"(CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1! Addressing the +'s =ith KOS* over */ tunnel

/rinciple

IP net+or0

IP Pac0ets

1!0 O(S +' ,anaged7y OS*

protocol E!F

C&NP

IS<IS

ES<IS C&NP

IS<IS

ES<IS

OS* over */ tunneling is a techni>ue that consists in the insertion EencapsulationF o6 the OS* tra66ic in */

pac5ets.

The eHtre,ities o6 the tunnels are typically a 1!0O(S server and an +'.

The 3C+ connecting the 1!0O(S and the +' =ill carry */ pac5ets.

The +' and the 1!0O(S server need to support the OS* and */ protocols9 =hereas the routers onlyneed to support the */ protocol.

+' has to 7e co,pati7le =ith this 6eature.

*S-*S< *nter,ediate Syste, W *nter,ediate Syste,'S-*S< 'nd Syste, W *nter,ediate Syste,

*S-*S and 'S-*S are t=o OS* routing protocols.

CL+/< Connection-Less +et=or5 /rotocol. *tJs the OS* net=or5 Elayer !F protocol.

Section ! (odule 1 /age 1"&





3 ·1 · 1$1CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


'Ha,ple< 10S( ,anaged through an 180TSS-!20

1!0O(S

O S * o v e r

* / t u n n e l

*n this eHa,ple9 the 7idirectional OS* over */ tunnel 7et=een the 1!0O(S and the TSS-!20 is

necessary 6or the ,anage,ent o6 the 10S(. *n 6act9 the 10 ,anage,ent uses OS* protocol and itJsthere6ore necessary to create an OS* over */ tunnel up to the TSS-!20. 4et=een TSS-!20 and 10S(9the OS* protocol is transported 7y the 3CC.








+' Con6iguration procedure< ! %+'

4y ,eans o6 Cra6t Ter,inal<

1. Start the supervision o6 the +' and

Login2. Choose the ,enu ,Con5iguration

Co6outing Inter5aces Con5iguration Et*ernet Con5iguration.

!. 'na7le the 'thernet inter6ace

. Assign an */ address and ,as5 tothe 'thernet inter6ace

. Clic5 on Appl)

>3?

>4?

>5?








+' Con6iguration procedure< ! %+' ?cont.@

. Choose the ,enu ,Con5iguration Co6outing %unnelingCon5iguration -SI over IP.

". As eote 4estination IP Address 9 enter the 1!0O(S serverJs */address

8. Clic5 on Appl)

>"?

>$?

The */ address o6 the 1!0O(S can 7e get 7y typing the co,,and Kcat IetcIhosts 6ro, a +*D shell.








+' Con6iguration procedure< 180TSS-!20 %+'

:irst o6 all9 con6igure the OS* AR'A that the +' is part o6 E,ust 7e thesa,e as the one o6 1!0O(SF.

To open the OS* Address ,enu select< Counication Net+or0

oain -SI #ng -SI NE Area

1. *nsert the address

2. Clic5 on Save

!. Clic5 on 7es

The OS* page contains the OS* AR'A panel<

-SI AEA< Co,7o7oH to deter,ine an access *denti6ier 6or an OS* area.&evel 3 Initial oain Part< Assign the initial do,ain part o6 the ,anual area address E8

heHadeci,al charactersF.

&evel 3 oain @orat Identiier< Assign the do,ain 6or,at identi6ier 6ield o6 the ,anual areaaddress E2 heHadeci,al charactersF.

&evel 3 -rganiation< Assign the organiation 6ield o6 the ,anual area address E8 heHadeci,alcharactersF.

&evel 3 eserved< Assign the reserved 6ield o6 the ,anual area address E heHadeci,alcharactersF.

&evel 3 outing< Assign the routing do,ain and routing area =ithin the routing do,ain o6 the,anual area address E8 heHadeci,al charactersF.

&evel 3 S)ste Identiier< This is the syste, identi6ier assigned to the card E12 heHadeci,alcharactersF.








+' Con6iguration procedure< 180TSS-!20 %+' ?cont.@

Then9 create the OS* over */ tunnel.

To open the OS* Tunnel ,enu select< Counication Net+or0oain -SI #ng -SI %unnel

!. Clic5 on Save

1. Clic5 on Create to create ane= -SI over IP tunnel

2. *nsert the Access *denti6ierand the */ address o6 thetarget +'








Con6iguration /rocedure on the 1!0O(S

1. Actions E#& %unnel Create-SI over IP %unnel

2. Select the

Supervision Area

!. ,#anaged NE. or ,Eternal!ate+a).

. Select the %N +' 6ro,the list. *ts */ address isauto,atically retrieved

. ,Appl).






3 ·1 · 1$"CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.


OS* over */ Tunnel List

Searc* E#& %unnel !et -SI over IP %unnels






3 ·1 · 1$$CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1 Security in AL net=or5s






3 ·1 · 1$(CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1 Security in AL net=or5s

*ntroduction

*nvolved +'s

180TSS-1009 6ro, R!.2

180TSS-!209 6ro, R!. 18!0/SS9 6ro, R!..2

Protocol Purpose

RA3*S ERe,ote Authentication3ial *n ser ServiceF

ser ,anage,ent< Authentication9 Authoriation9 Accounting

SS ESecure SellFTL1 ,anage,ent inter6aceS:T/< Secure :ile Trans6er /rotocolCL*< Co,,and Line *nter6ace

SSL ESecure Soc5et LayerF '>uip,ent $ie= in 1!0O(SS+(/v! ESi,ple +et=or5(anage,ent /rotocol version !F

S+(/ ,anage,ent inter6ace

Secure ,odeThe +' replies only to secure protocols<SS-29 S:T/9 SSL9 S+(/v!






3 ·1 · 1('CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1.1 RA3*S

Section ! (odule 1 /age 1&0





3 ·1 · 1(1CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1.1 RA3*S

*ntroduction

eote Aut*entication ial In /ser Service EAI/SF is anet=or5ing protocol that provides centralied Authentication9 Authoriation9and Accounting EAAAF ,anage,ent 6or hosts to connect and use a net=or5

service.

RA3*S server is responsi7le 6or AAA

1!0O(S and +'s act as RA3*S clients







1.1 RA3*S

Con6iguration in 1!0O(S

The custo,iation o6 RA3*S para,eters in the 1!0O(S is in the scope o6So6t=are installation.

*tJs not addressed 7y this Student %uide.

Section ! (odule 1 /age 1&!





3 ·1 · 1(4CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1.1 RA3*S

Con6iguration in +'

(ain and Spare RA3*S servers

the +' can 7e con6igured to reach t=o RA3*S servers

RA3*S server para,eters */ address

port< 7y de6ault 1812

Shared secret< to !2 character-long ASC** string

Authentication order con6iguration

Local 18!0/SS and 180TSS< authentication carried out 7y the +'. +o RA3*S

i,ple,entation re>uired.

RA3*S

18!0/SS< authentication carried out 7y RA3*S server. 180TSS< 6irst9 the authentication is carried out 7y +'. *6 it 6ails9 the RA3*S server

ta5es over.

RA3*S9 then Local 18!0/SS< 6irst9 the authentication is carried out 7y the RA3*S server. *6 it 6ails9 the

+' ta5es over.

*'T: r6c28< Transactions 7et=een the client and RA3*S server are authenticated through the use o6 a

shared secret9 =hich is never sent over the net=or5. *n addition9 any user pass=ords are sent encrypted7et=een the client and RA3*S server9 to eli,inate the possi7ility that so,eone snooping on an unsecurenet=or5 could deter,ine a userJs pass=ord.

*n case o6 authentication carried out 7y the +'9 the user account ,ust 7e con6igured in the +'.







1.1 RA3*S

Con6iguration in +'< 18!0/SS-!2

To con6igure the RA3*S server para,eters9 use the '>uip,ent $ie= orY*C Adinistration Securit) A4I/S Servers >clic0 on ,Create. ?

RA31IRA32

Server< select RA31 or RA32 6or ,ain or spare RA3*S server.

Server */< */ address o6 the RA3*S server./ort< /ort o6 the RA3*S server Ede6ault port is 1812F.

Shared Secret< it is the shared secret 5ey 7et=een the +' and the RA3*S server. to !2 character-long ASC** string.







1.1 RA3*S

Con6iguration in +'< 18!0/SS-!2 ?cont.@

To con6igure the authentication order9 use the '>uip,ent $ie= or Y*C Adinistration Securit) A4I/S Properties

0-100

1-1000

Ti,eout E1-1000sF< it indicates the ,aHi,u, ti,eout value 6or connectivity.

Retries E0-100F< it speci6ies the nu,7er o6 retries allo=ed in connecting to the RA3*S server. Authentication Order ELocalIRA3*SIRA3*S9 then LocalF<

- Local< the chec5 6or the user account in only per6or,ed in the local data7ase o6 the +'.

- RA3*S< the chec5 6or the user account in only per6or,ed in the RA3*S server data7ase.

- RA3*S9 then local< a 6irst chec5 is per6or,ed in the RA3*S server in case o6 the user account isnot present9 the re>uest is sent to the local data7ase o6 the +'.






3 ·1 · 1("CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1.1 RA3*S

Con6iguration in +'< 180TSS-100

To con6igure the RA3*S server para,eters and the authentication order9use the '>uip,ent $ie= or Y*C Securit) Con5igure

RadiusILocal

activeIsuspended

Order ELocalIRA3*SF<

- Local< the chec5 6or the user *3 in only per6or,ed in the local data7ase o6 the +'.- RA3*S< a 6irst chec5 is per6or,ed in the local data7ase o6 the +' in case o6 the user account is notpresent9 the re>uest is sent to the RA3*S server.

Retries E0-100F< it speci6ies the nu,7er o6 retries allo=ed in connecting to the RA3*S server.

Ti,eout E1-1000 secF< it indicates the ,aHi,u, ti,eout value 6or connectivity.

Address< */ address o6 the RA3*S Server.

/ort< /ort o6 the RA3*S Server Ede6ault port is 1812F.

Status< Active or Suspended.

Secret< it is the shared secret 5ey 7et=een the +' and the RA3*S server. to !2 character-long ASC** string.

Section ! (odule 1 /age 1&"





3 ·1 · 1($CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1.1 RA3*S

Con6iguration in +'< 180TSS-!20

To con6igure the RA3*S server para,eters9 use the '>uip,ent $ie= orY*C Securit) Adinistration #anageent A4I/S Con5igure

A4I/S

Create

Server +u,7er< select RA31 or RA32 6or ,ain or spare RA3*S server.

Status E'+A4L'I3*SA4L'F< it indicates =hether the authentication is active or disa7led. */ Address < it indicates the */ address o6 the RA3*S Server.

/ort< it is the authentication port o6 the RA3*S server. The de6ault port value is 1812.

Secret Mey< it is the shared secret 5ey 7et=een the +' and the RA3*S server. to !2 character-long ASC** string.






3 ·1 · 1((CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1.1 RA3*S

Con6iguration in +'< 180TSS-!20 ?cont.@

To con6igure the authentication order9 use the '>uip,ent $ie= or Y*C Securit) Adinistration #anageent A4I/S Con5igure Aut*orit)

0-100

1-1000

Authority Order ELOCALIRA3*SF<

- LOCAL< the chec5 6or the user *3 in only per6or,ed in the local data7ase o6 the +'.- RA3*S< a 6irst chec5 is per6or,ed in the local data7ase o6 the +' in case o6 the user account is notpresent9 a re>uest is sent to the RA3*S server.

Retries E0-100F< it speci6ies the nu,7er o6 retries allo=ed in connecting to the RA3*S server.

Ti,eout E1-1000sF< it indicates the ,aHi,u, ti,eout value 6or connectivity.

Section ! (odule 1 /age 1&&





3 ·1 · 2''CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1.2 SS







1.2 SS

Overvie=

SS ESecure SellF is a co,,unication protocol used to create a securelyaccess to a re,ote host. *t uses special algorith,s to encrypt the datastrea,9 ensure data strea, integrity and per6or, authentication in a sa6e

and secure =ay.

SS authentication protocols are 7ased on a pair o6 cryptographic 5eys9called K private 5ey and Kpu7lic 5ey9 used to encrypt and decrypt data.

SS is used 6or the 6ollo=ing services 7et=een +' and 1!0O(S TL1 ,anage,ent inter6ace S:T/< Secure :ile Trans6er /rotocol

CL*< Co,,and Line *nter6ace







1.2 SS

Con6iguration

4y de6ault9 precon6igured SS 5eys are already availa7le 7oth in the +'sand in the 1!0O(S. So9 =hile creating the +' in 1!0O(S9 the usercan select the de6ault 5ey.

o=ever9 the user can generate other 5eys9 7ut this is an ad,inistrationissue.

Apart 6ro, the 5eys that ,ust 7e availa7le in the +' and in the 1!0O(S9the SS con6iguration concerns ;ust 1!0O(S

in +' creation or ...

later on 6or not supervised +'s

The +'s re>uire no con6iguration.







1.2 SS

'na7le SS and set the 5ey

1. *n the KSet +' Address =indo=set SS2 as SecureCo,,unication

2. +eHt

!. ChooseK3':ALT







1.2 SS

Select another 5ey 6or one or ,ore +'s

To select another 5ey 6or the +'s that are already ena7led 6or SS<

Actions '(L Con6igure +' *nter6ace Con6igure SS







1.2 SS

Select another 5ey 6or one or ,ore +'s ?cont.@

The =indo= sho=s all the +'s =ith SS ena7led

+eHt







1.2 SS

Select another 5ey 6or one or ,ore +'s ?cont.@

1. Selectanother 5ey

2. Apply






3 ·1 · 2'"CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1.2 SS

Select another 5ey 6or one +'

T=o ,ethods

Set +' address

Select the +' right clic5 Actions Con6igure SS you get the sa,e =iard descri7ed in the previous slides






3 ·1 · 2'$CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1.! SSL






3 ·1 · 2'(CO/R*%T ©A LCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1.! SSL

Overvie=

The SSL ESecure Soc5et LayerF protocol relies on TC/I*/.

An SSL-ena7led server and an SSL-ena7led client authenticate one eachother to esta7lish an encrypted connection.

SSL is used 7y 1!0O(S to ,anage the '>uip,ent $ie= o6 the +'s.

+o operation via '>uip,ent $ie= or 1!0O(SJs %*s is re>uired.

The +'Js certi6icates ,ust 7e copied 6ro, the +' to the 1!0O(S this is an ad,inistration issue







1. S+(/v!







1. S+(/v!

Overvie=

S+(/v! provides secure access to devices 7y a co,7ination o6authenticating and encrypting pac5ets over the net=or5.

The security 6eatures provided 7y S+(/v! are< (essage integrity

'nsuring that a pac5et has not 7een ta,pered =hile in-transit.

Authentication 3eter,ining =hether the ,essage is 6ro, a valid source.

'ncryption Scra,7ling the content o6 a pac5et preventing it 6ro, 7eing seen 7y an unauthoried

source.

S+(/v! ,ust 7e con6igured 7oth in the 1!0 O(S and in the +'s. T=opara,eters are necessary< aut*entication< The process o6 ensuring ,essage integrity and protection

against ,essage replays. *t includes 7oth data integrity and data originauthentication.

privac)< An encrypted state o6 the contents o6 an S+(/ pac5et =here they areprevented 6ro, 7eing disclosed on a net=or5.







1. S+(/v!

Con6iguration in 1!0O(S 6or one +'

1. Set +' address

2. Set K$! asS+(/version

!. Con6igure theappropriatepara,eters Esee+otesF

Security Level< it speci6ies the possi7le con6iguration in ter,s o6 Authentication and 'ncryption<

+oAuthoriation+o/rivacy < uses only a userna,e to ,atch 6or authentication. Authoriation+o/rivacy < provides only authentication9 7ased on the selected protocol.

Authoriation/rivacy < provides 7oth authentication and privacy9 7ased on the selected protocols.

S( ser: enter the S+(/ user *3.

S( Authentication /ass=ord< enter the pass=ord 6or authentication.

+.4< in case o6 TSS the Authentication pass=ord is the sa,e as login pass=ord .

S( /rivacy /ass=ord< enter the pass=ord 6or privacy connection.

+.4< in case o6 TSS the /rivacy pass=ord is li5e S( Auth. pass=ord 7ut inverted.

Authentication (ethod E(AC-(3 I (AC-SAF< speci6ies the algorith, 6or Authentication.

/rivacy (ethod E3'S I A'S-128F< speci6ies the algorith, 6or encryption.

+.4< in case o6 /SS-!2 the Authentication and /rivacy algorith,s are 6iHed< (3 and A'S-128.







1. S+(/v!

Con6iguration in 1!0O(S 6or one +' or ,ore +'s

T=o ,ethods that provide the sa,e =iard descri7ed in the previous slide

:ro, the (S-%* tool7ar Actions '(L Con6igure +' *nter6ace Con6igure S+(/

:ro, the +' list Select the +' right clic5 Actions Con6igure S+(/







1. S+(/v!


To con6igure the S+(/9 use the '>uip,ent $ie= or Y*C Securit) /sers >select a /ser?

Con6igure thespeci6ic protocols

S+(/v! privacy protocol Edisa7led I C4C3'S I A'SF< it speci6ies the encryption algorith, 6or the

privacy protocol. S+(/v! authoriation protocol Edisa7led I (3 I SAF< it speci6ies the encryption algorith, 6or the

authentication protocol.







1. S+(/v!


To con6igure the S+(/9 use the '>uip,ent $ie= or Y*C Securit) Adinistration Accounts C*ange accounts #odi5)

account

Con6igure thespeci6ic protocols

S+(/v! /rivacy /rotocol E+O/R*$ I C4C3'S I A'SF< it speci6ies the encryption algorith, 6or the

privacy protocol. S+(/v! Authoriation /rotocol E+OATI (AC(3F< it speci6ies the encryption algorith, 6or the

authentication protocol.







1. S+(/v!


To con6igure the S+(/9 use the '>uip,ent $ie= or Y*C Adinistration Securit) SN#P v3 /sers >select a /ser and

clic0 on ,4etails.?

Authentication /ass=ord< enter the pass=ord 6or authentication.

/rivacy /ass=ord< enter the pass=ord 6or privacy connection.

+.4< S+(/v! /rivacy protocol and Authentication protocol are 6iHed to (3 and A'S-128 .






3 ·1 · 21"CO/R*%T © ALCAT'L-LC'+T 2012. ALL R*%TS R'S'R$'3.

1. Secure ,ode







1. Secure ,ode

3e6inition

The +' can =or5 either in S'CR' or +S'CR' ,ode. 4y de6ault9 the +' shall start in +S'CR' ,ode. This allo=s 7ac5=ard

co,pati7ility to=ards eHisting +et=or5 (anage,ent Syste,s that do not

support encryption.

Nhen the +' is in S'CR' ,ode9 several non-secure protocols aredisa7led< as S+(/9 only S+(/v! is supported SS-2 encryption protocol is used 6or TL1 and CL* SSL is used 6or TT/S S:T/ is used to trans6er 6iles 7et=een 1!0O(S and +'

The SecureInsecure ,ode ,ust 7e con6igured only in the +'s and not inthe 1!0O(S. :irst9 con6igure SS9 SSL9S+(/v!9 and then ena7le the S'CR' ,ode.

+.4< RA3*S 6unctionality can 7e used regardless the +'JsS'CR'I+S'CR' ,ode con6iguration.







1. Secure ,ode


The 6ollo=ing steps ,ust 7e eHecuted in order to trans6or, a /SS nodeinto secure (ode<

1. Con6igure SSL9 SS and S+(/v! as eHplained in previous chapters

2. Open the ,ain %* and ,odi6y * (ode!. Clic5 on KSu7,it

Set K'ncrypted in

the * (ode 6ield

* indicates the user inter6aces< CL*ITL1IN'4*.







1. Secure ,ode


The con6iguration via Y*C9 6or the TSS-1009 is accessi7le under the ,enu Securit) Con5igure

Set Ksecure in theS'CACC 6ield

S'CACC W Secure ,ode < set Ksecure 6or Secure ,ode.

3C/ protocol on the CT port < i6 chec5ed9 it ena7les the 3C/ protocol on the CT port o6 the +'./S/ORT W 'na7le physical port on +' < i6 chec5ed9 it ena7les the de7ug port o6 the +' E and : portsare al=ays availa7leF.







1. Secure ,ode


The con6iguration via Y*C is accessi7le9 6or the TSS-!209 under the ,enu Securit) Adinistration Account 4e5ault Settings

Set KS'CR' inthe Security Access6ield

Security Access < set KS'CR' 6or Secure ,ode.

*C(/ /rotocol < K'+A4L' or K3*SA4L' *C(/ protocol on the +'.3C/ /rotocol < K'+A4L' or K3*SA4L' 3C/ protocol on the CT port o6 the +'.

/hysical /orts < K'+A4L' or K3*SA4L' the de7ug port o6 the +' E and : ports are al=ays availa7leF.







Ans=er the >uestions

Nhich is the condition to auto-discover an +' ^

Nhich is the SS protocol 6unctionnality ^

Nhich para,eters are necessaries to con6igure the S+(/v! ^







'nd o6 ,odule+' Creation and Supervision





))S'C



(odule 2(aps and Su,-netors

TOS!01"#$!.1-S%-R&.-'d1 (odule !.2 'dition 1

Section !Syste/ Operation

1!0 O(S '(L



Section ! (odule 2 age 1




1!0 O(S '(L R&. Operation and (aintenanceSyste/ Operation (aps and Su,-netors

3 · 2 · 2CO3R*%4T © ALCAT'L-L5C'+T 2012. ALL R*%4TS R'S'R$'6.

7lan page

This page is le8t ,lan intentionally

6ocu/ent 4istory

'dition 6ate Author Re/ars








(odule o,<ectives

5pon co/pletion o8 this /odule: you should ,e a,le to=

Create and /anipulate the /aps

Section ! (odule 2 age !






(odule o,<ectives >cont.?


Section ! (odule 2 age @






Ta,le o8 contents

S-itch to notes vie-A age

1 Overview "2 Sub-Network and Node management 1@3 Zoom 2&4 Size 35 Background 426 rid 4"! Some "etting" in #$iew management %ane&' 52( )ink management %ane& 5"

Section ! (odule 2 age






Ta,le o8 contents >cont.?

S-itch to notes vie-A







3 · 2 · !CO3R*%4T © ALCAT'L-L5C'+T 2012. ALL R*%4TS R'S'R$'6.

1 Overvie

Section ! (odule 2 age "





3 · 2 · (CO3R*%4T © ALCAT'L-L5C'+T 2012. ALL R*%4TS R'S'R$'6.

1 Overvie

(S-%5* (ap ;eatures

1!0 O(S provides the 8olloing 8eatures= Network to%o&og* %artition: ena,ling the user to organiBe the netor ,y creating

su,-netors and assigning nodes to the/. )ink creation: ena,ling the user to create or let the syste/ auto-discover the physical

connectivity ,eteen nodes o8 the /anaged netor.

ra%+ica& Ob,ect anagement: ena,ling the user to /ove on the /aps the iconsrepresenting the netors o,<ects. The o,<ect position can then ,e 8astened or un-8astened on the /aps.

a% $iew ani%u&ation: ena,ling the user to Boo/ in: Boo/ out: assign a ,acgroundpicture and so on.

.&arm "tatu" %ro%agation: so that the color o8 an icon is deter/ined ,y the /ostsevere alar/ a88ecting its su,tended o,<ects.

S+ortcut to /uerie" or action": ena,ling the user to retrieve lists or per8or/co//ands on the netors o,<ects 8ro/ pop-up /enus: availa,le ,y right-clicing on the

related icons.

A (ap is a graphical vie here the netors o,<ects: such as su,-netors: nodes: lins: are represented

,y graphic sy/,ols DiconsE.

(aps are shared a/ong all the (anage/ent Application= '(L: S64: FT: G6(: SO+'T.

(S= (ulti-Service. The /ap is shared ,y all o8 the applications.







1 Overvie

ROOT netor

ROOTnetor

The Syste/ auto/atically instantiates a ROOT netor: thatrecursively contains all the Su,-+etors created ,y the users.

Only Su,-+etors Dand not +odesE can ,e added to ROOT

Su,-+etors:recursivelycontained inROOT

All the procedures on netors and su,-netors descri,ed in the present (odule can ,e issued as ell

8ro/ the (S-%5* netors and su,-netors lists.

To open the netor list= #Searc+ a% Network"' Donly ROOT is shonE.

;ro/ the ROOT o,<ect in the list it is possi,le to create su,-netors D#.ction" 1reate Sub- Network' E or list the 8irst-level su,-netors DSearc+ Sub-Network" E.

;ro/ the Su,-+etors in the Su,-+etor lists: it is then possi,le to search several ite/s.

Section ! (odule 2 age &






1 Overvie

To /ethods 8or (ap /anage/ent

There are to /ethods 8or /anaging the Su,-+etors=

7asic Advanced D(ap version 2.0E

The training addresses the H(ap version 2.0I /ethod







1 Overvie

To /ethods 8or (ap /anage/ent >cont.?

1. To sitch 8ro/one /ethod tothe other one ...

2. ... open the HOptionsI indoDTools OptionsE

!. Tic to ena,le

@. Close the /apand reopen it







1 Overvie

anels

(iniature

%o to parent /ap4ideJSho theright panel







2 Su,-+etor and +ode /anage/ent

Section ! (odule 2 age 1@







Su,-+etor creation

1. 6ou,le clic HROOTI toget its /ap

2. Right clic in the (ap paneland HCreate Su,netorI








Save the o,<ects position

To save the o,<ectsposition






3 · 2 · 1!CO3R*%4T © ALCAT'L-L5C'+T 2012. ALL R*%4TS R'S'R$'6.


Add a node to the Su,-+etor

There are to /ethods 8or adding a node to a Su,-+etor=

(ethod K1= using <ust the Right panel

(ethod K2= using the Su,-+etor tree A+6 the Right panel

Rightpanel

Su,-+etortree

;irst o8 all: the node /ust ,e availa,le

Section ! (odule 2 age 1"





3 · 2 · 1(CO3R*%4T © ALCAT'L-L5C'+T 2012. ALL R*%4TS R'S'R$'6.


Add a node to the Su,-+etor (ethod K1

1. Open the /ap

2. 6rag M 6ropthe +ode








+odes in8o in pop-up

The icons shon,eside the nodedepend on the

Technology ,eingdisplayed

Communication StateReachable !nreachable "artiall#reachable

Local Access Control$t concerns the cra%t-terminal&'ranted Denied&

Alignment State (ode vs )*+,.S

onl# "h#s& Supervision State

onl# /( Con%& Do0nload Status1hile Disabled (E is notcon%igured b# )*+,.S-SD2

onl# "h#s& .ulti (Es e&g& .S( 0ith $SA board

onl# /( Control "lane status %or '."LS3AS(

(ulti +'s= e.g. 10S( ith *SA ,oards.

Co//unication state

•artially reacha,le= the node supervision relies on to protocols De.g. OS* and *E and one o8 the/ is notoperational. ;or eNa/ple: 10S( is reacha,le: hereas its *SA ,oard is not.

Con8. 6onload Status

•6e8ault 'na,led. *8 disa,led: the con8igurations carried out ,y /eans o8 1!0O(S-S64 are <ust ept inthe 1!0O(S-S64s data,ase and not applied to the +'.

Section ! (odule 2 age 1&







(ove a node in the Su,-+etor

1. e.g. 'nter the node 8ro/the top right verteN

e.g. (ove +ode2

@. ... and drop

. Save the /ap

*ts not possi,le tooverlap o,<ects

2. A crossappears

!. Clic. Then drag ...








Re/ove a node 8ro/ the Su,-+etor








Add a node to the Su,-+etor (ethod K2

1. (odi8y Su,-+etor








Add a node to the Su,-+etor (ethod K2 >cont.?

2. Clic this icon

!. Select one or/ore o,<ects

@. OF

. Apply

Section ! (odule 2 age 2!







Add a node to the Su,-+etor (ethod K2 >cont.?

The +ode is assigned to the /aps H+ot placedI group.

D+ot placed= the position o8 the o,<ect in the /ap has not ,een yet de8inedE

6rag M 6rop the +ode tode8ine its position.

Dthe node is re/oved 8ro/

the H+ot placedI groupE

The H+ot placedI icon is shon in the /ap

Section ! (odule 2 age 2@







Assign an o,<ect ,ac to the H+ot placedI group

1. Select the o,<ect De.g. a +odeE

2. Clic this icon








Another ay to re/ove a node 8ro/ the Su,-+etor

2. Select the nodeto ,e re/oved

!. Clic thered cross

@. Apply

1. Select the Su,-+etor in the Su,-+etor tree Actions (odi8y Su,-+etor








ShoJhide the lins to unplaced o,<ect

+ode ! ,elongs to the H+ot placedI group

Theres a hysicalConnection ,eteen+ode1 and +ode!

Sho

4ide

Section ! (odule 2 age 2"







H%eneral *n8oI panel

OC DO88-age ConnectorE stands 8or a Su,-+etor at higher level than or at the sa/e level o8 the current

/aps ith hich the current /ap shares physical connections. They dont contri,ute to the a,ove HLinI counter.







! Poo/

Section ! (odule 2 age 2&






! Poo/

7y /eans o8 percentage

Section ! (odule 2 age !0






! Poo/

7y /eans o8 /ouse heel M CTRL

1. osition the cursor on the /ap area

2. ress CTRL on the ey,oard

!. Roll the /ouse heel ,ac and 8orth







! Poo/

7y /eans o8 /iniature







! Poo/

7y /eans o8 /iniature >cont.?

Section ! (odule 2 age !!






! Poo/

;it to page

The Boo/ is ad<usted so that at least one di/ension De.g. heightE is entirely shon

age

Section ! (odule 2 age !@






@ SiBe







@ SiBe

+ode and Su,-+etor

1 3 5

2

15







@ SiBe

(ap

2. Loo at the /aN

1. Scroll up tothe end

9@2 J @0 21.0

@12 J @0 10.!

/ a p s i

B e

Section ! (odule 2 age !"






@ SiBe

*ncrease the (ap siBe

Clic and hold don

delta

delta







@ SiBe

ResiBe /ap 8unction o8 o,<ect position

Constant ratio

&1&J1090

1&J"2" 610010

The /ap is resiBed so that it8its the area occupied ,y the/aps o,<ects

1 (

! 2 !

Section ! (odule 2 age !&






@ SiBe

*ncrease distance ,eteen o,<ects ...

The /ap siBe changes accordingly

e.g. clic ti/es

Section ! (odule 2 age @0






@ SiBe

6ecrease distance ,eteen o,<ects ...

e.g. clic ti/es

Overlapping*n case o8

overlapping:clic this icon:and eventually

the nodes







7acground







7acground

Add

/ a

p s i B

e

( 2

6 2 2 4

1 5 6ou,le clic

the picture

(ost o8 the ,acground i/ages are H900 N 00I: that corresponds to H20 N 1I in the rulers.

*8 the /ap siBe is loer than the ,acground siBe=

then the /ap siBe is set eQual to the ,acground siBe:

else the /ap siBe doesnt change.

Section ! (odule 2 age @!






7acground

;it i/age to /ap siBe

The ,acground ,eco/es as ,ig as the /ap Dat least one di/ensionE.

The ,acground siBe ratio is constant.

7e8ore

A8ter

Section ! (odule 2 age @@






7acground

ResiBe i/age 8unction o8 o,<ect position

The ,acground siBe gets closer to the area occupied ,y the o,<ects

The /ap siBe changes accordingly

7e8ore

A8ter

e.g. The o,<ects area is initially Quite s/aller thanthe ,acground siBe.

DThis co//and ors 8or the opposite case: tooE







7acground

Re/ove

1. Scroll don up

to the ,otto/

'ven though HSiBe= 200 N 10I:the hole /ap is colored

! . C h o o s e a c o l o r

2. 6ou,leclic

To get the de8ault color







%rid

Section ! (odule 2 age @"






%rid

ShoJ4ide

4ide

Sho







%rid

%rid siBe

%rid siBe 10

%rid siBe 0

Section ! (odule 2 age @&






%rid

Align to grid

The top le8t verteN o8 theo,<ects 8its to a grids point

A l i g n

t o g r i d

HAlign to gridI is applied ...

... only to the selected o,<ects: i8 any

...to all o8 the o,<ects: i8 no o,<ect is selected







%rid

Snap to grid

Ghen /oving the o,<ects in the /ap: their top le8t verteN 8its to the a grids point







" So/e settings in H$ie /anage/entpanelI







" So/e settings in H$ie /anage/ent panelI

O,<ect selection: color: verteN

Select allSelect none

Change selection color

Change selection ,order to lineJdashed

Collapse verteN 'Npand verteN








'dge Type

'dgeType

S t r a i g h t

4 o r i B o n

t a l

$ e r t i c a l

R e l a t i o n








La,el policy

+' La,el policy

A5TO= the la,els are shon or notdepending on the Boo/ level=

- high Boo/= shon

- lo Boo/= hidden

Lin La,el policy








Search 8or o,<ects in the (ap

1. As you type HI: the node !7 is selected

2. 7y clicing once H%o to neNt occurrenceI: the node 1@7 is selected

%o to neNtoccurrence

%o toprevious

occurrence

!. 7y clicing again H%o to neNt occurrenceI: the node 17 is selected

1st

2nd

!rd







9 Lin /anage/ent panel

Section ! (odule 2 age "






9 Lin /anage/ent panel

Overvie

The operator can shoJhide so/e lins

7y de8ault: all o8 the

lins are shon. So: allo8 the (aps o,<ects

are in the list.

Clic this ,utton to clear listClic this ,utton to addele/ent in list

Clic this ,utton tore/ove ele/ent 8ro/ list

Clic this ,utton to addall o,<ects in list






3 · 2 ·50CO3R*%4T © ALCAT'L-L5C'+T 2012. ALL R*%4TS R'S'R$'6.

'Nercise

Create a /ap ith a proper ,acground

6rag training +'s inside it

Save the /ap

Ti/e alloed= 10 /inutes

Section ! (odule 2 age &





3 · 2 ·6CO3R*%4T © ALCAT'L-L5C'+T 2012. ALL R*%4TS R'S'R$'6.

'nd o8 /odule(aps and Su,-netors




Copyright © 2012 Alcatel-Lucent. All Rights Reserved.TOS!01"#$!.1-S%-R&.-'d1 (odule !.! 'dition 1

Section ! ) (odule 1 ) *age 1

++S'C



(odule !*hysical connections

TOS!01"#$!.1-S%-R&.-'d1 (odule !.! 'dition 1

Section !Syste Operation

1!/0 O(S '(L







1!/0 O(S '(L ) R&. Operation and (aintenanceSyste Operation ) *hysical connections

3 · 3 · 2CO*R,%T © ALCAT'L-LC'T 2012. ALL R,%TS R'S'R$'3.

4lan5 page


3ocuent istory

'dition 3ate Author Rear5s





Section ! ) (odule 1 ) *age !



(odule o7;ectives

pon copletion o6 this odule9 you should 7e a7le to<

Create anually the physical connections

Let 1!/0 O(S auto-discover the physical connections deployed in the net=or5




Section ! ) (odule 1 ) *age >



(odule o7;ectives ?cont.@





Section ! ) (odule 1 ) *age /



Ta7le o6 contents

S=itch to notes vie=A *age

1 Introduction "2 Physical Connection_manual creation 113 Internal Physical Connection_automatic upload 2!.1 ploading the S3 physical connections 28!.2 ploading the B3( internal O*S *hysical Connections 12L(D !&!.! ploading the B3( OTS *hysical Connections 18!0*SSD >/!.> ploading the radio lin5s &/00(*RD /14 Highlight 58




Section ! ) (odule 1 ) *age



Ta7le o6 contents ?cont.@

S=itch to notes vie=A *age




Section ! ) (odule 1 ) *age "



1 ,ntroduction






3 · 3 · CO*R,%T © ALCAT'L-LC'T 2012. ALL R,%TS R'S'R$'3.

1 ,ntroduction

ode List

Bhen a et=or5 'leent is created in '(L9 a correspondent o7;ect9 called ode9 is autoatically created

too.

A ode is the logical representation o6 the '9 containing the o7;ects used 7y the net=or5 anagers 6orodeling the transission net=or59 that are ports and terination points.

Soeties9 =hen a ne= ' is created9 the ne= correspondent node is not appearing in the node list. ,nthis case9 the 6ollo=ing steps ust 7e per6ored<

1. ,ssue ESearch *hysical '(L 3oainsF

2. Select the ne%roup or the '(L corresponding to the '(L,( instance o6 the ne=ly created '

!. 3ou7le-clic5 and EActions SynchroniGe SynchroniGe '(LF




Section ! ) (odule 1 ) *age &


3 · 3 · !CO*R,%T © ALCAT'L-LC'T 2012. ALL R,%TS R'S'R$'3.

1 ,ntroduction

SynchroniGe '

4e6ore *hysical Connection creation9 it is reHuired to per6or "#ctions

Physical $ynchroni%e $ynchroni%e &'( 6ro the ne= ode.

The ESynchroniGe 'F procedure uploads in the ode the ports that are

discovered in the '.






3 · 3 · 1)CO*R,%T © ALCAT'L-LC'T 2012. ALL R,%TS R'S'R$'3.

1 ,ntroduction

T=o =ays to create physical connections

1. (anual procedure

The user anually creates the physical connections 7et=een the odes9

7ased on the in6oration he has a7out the net=or5 connectivity.

2. Autoatic upload procedure

*or $+H Physical Connections, The physical connections are auto-discovered 7ased on the Trace ,denti6ier in6oration contained in the I0 7yteo6 the S3 6rae.

*or -+. /P$ Physical Connections internal to 16260. &odes< Thephysical connections are auto-discovered 7ased on the eHuipent internalca7ling in6oration retrieved 7y the 1!/0O(S.

*or -+. /$ Physical Connections eteen 13)P$$ &odes, The

physical connections are auto-discovered 7ased on the in6oration containedin the connection ta7les o6 the 's.

*or adio lins eteen !5)).P &odes, The physical connections areauto-discovered 7ased on the ,* routing in6oration contained in the 's not operational =hen the Student %uide =as developed







2 *hysical Connection#anual creation







2 (anually creating physical connections

*rocedure

1. Select the t=o end-odes o6 the *hysical Connection optionalD

2. ,ssue "#ctions Physical Create Physical Connection(

The "Create Physical Connection( BiGard is opened

!. Assign a ser La7el to the *hysical Connection

>. Select "Connection 1ype( S39 B3(9 'thernet9 JD and otherrelevant paraeters o6 the *C to 7e created. Set the "Implement4ule( to "6ser( KD

/. Clic5 "&e7t(

. 4ased on the "Connection 1ype( chosen at point >9 select the "$1.1ype( or "-+. 1ype( etc.

". Select the "# &ode( 9 "8 &ode( 9 "# Port and "8 port(

8. Clic5 "#pply( to start the *hysical Connection creation

All the con6igura7le paraeters that are not re6erenced in the present (odule are speci6ic o6 the proper

et=or5 (anageent application S39 B3(9 etc.D in charge to anage the physical connection. See thespeci6ic docuentation 6or details.

KD ,6 the E,pleent RuleF is set to EAutoaticF9 the proper et=or5 (anageent application9 i6 installed9=ill try to ipleent the *hysical connection9 so instantiating all the transission o7;ects Trails9 Lin5connections9 JD =hich are necessary 6or the anageent o6 the physical connection at net=or5 layer. Seethe speci6ic docuentation o6 the proper et=or5 (anageent application S39 B3(9 etc.D 6or details.




Section ! ) (odule 1 ) *age 1!




Open the creation =iGard

1. Select the t=o end-odes o6 the*hysical Connection

2. ,ssue "#ctions

Physical CreatePhysicalConnection(




Section ! ) (odule 1 ) *age 1>




'aple< S3 *hysical Connection

>. Select "Connection 1ype( andother relevant paraeters o6 the*C to 7e created. Set the"Implement 4ule( to "6ser(

!. Assign a ser La7el tothe *hysical Connection

. et/. Set "9es(: so that the

*hysical Connectionstructure is displayeda6ter creation

+e;ined

Implemented

+eimplemented

Leave "1ransport #larm 'na2ling 4ule( eHual to "/n Implementation( to display the alars o6 the

physical connection =hen it is "Implemented( .




Section ! ) (odule 1 ) *age 1/




'aple< S3 *hysical Connection ?cont.@

". select the"$1. 1ype(

8. The nodes are

availa7le7ecause they=ere selectedin the ap

&. Leave E:roListF

10. Select theports. Clic5 theicon or

any=here inthe portMsspace. Then9see net slide.

11. :inally9 Apply








Options 6or retrieving the o7;ect lists




Section ! ) (odule 1 ) *age 1"





*hysicalConnection

ode

*ort

3ou7le-clic5the lin5

List

Structure

•To get the *C structure9 itMs possi7le to select the *C Search *hysical Connection Structure.

•This slide reports a 3e6ined *C.









+e;ined

Implemented

+eimplemented

+e;ined

Implemented A>(ultipleSection

To change the*C state9dou7le-clic5 it Actions Con6iguration ,pleentN

3eipleent




Section ! ) (odule 1 ) *age 1&


3 · 3 · 1!CO*R,%T © ALCAT'L-LC'T 2012. ALL R,%TS R'S'R$'3.


'aple< 'thernet *hysical Connection

es< to open a *hysical Connectionlist =ith the *C 7eing created at the

end o6 the creation

+e;ined

Implemented

+eimplemented

o n l y

3 e 6 i n e d








'aple< 'thernet *hysical Connection ?cont.@

*hysicalConnection

structure notavaila7le

*Clist








'aple< Radio *hysical Connection 6or &/00(*R

es< to open a *hysical Connectionlist =ith the *C 7eing created at the

end o6 the creation








'aple< Radio *hysical Connection 6or &/00(*R ?cont.@

*C list+e;ined

Implemented

+eimplemented

o n l y

3 e 6 i n e d

*hysicalConnection

structure notavaila7le




Section ! ) (odule 1 ) *age 2!




'aple< OTS *hysical Connection 6or 12L(

es< to open the *hysicalConnection structure atthe end o6 the creation




Section ! ) (odule 1 ) *age 2>




'aple< OTS *hysical Connection 6or 12L( ?cont.@




Section ! ) (odule 1 ) *age 2/




'aple< OTS *hysical Connection 6or 12L( ?cont.@







! ,nternal *hysicalConnection#autoatic upload




Section ! ) (odule 1 ) *age 2"



! Autoatic upload o6 physical connections

%eneralities

*hysical Connections can 7e uploaded 7y the 1!/0 O(S relying on thein6oration contained in the nodes. The procedure applies to the 6ollo=ing

physical connections types<

$+H Physical Connections, The auto-discovery process is 7ased on theTrace ,denti6ier in6oration contained in the I0 7yte o6 the S3 6rae.

-+. /P$ Physical Connections internal to 16260. &odes< The auto-discovery process is 7ased on the eHuipent internal ca7ling in6oration thatcan 7e retrieved 7y the 1!/0O(S.

-+. /$ Physical Connections eteen 13)P$$ &odes, The auto-discovery process is 7ased on in6oration e7edded in the Optical SupervisoryChannel.

adio lins eteen !5)).P &odes, The auto-discovery process is 7asedon the ,* in6oration contained in the 's

,n the 6ollo=ing9 the relevant eaples.







!.1 ploading the S3 physicalconnections




Section ! ) (odule 1 ) *age 2&



!.1 ploading the S3 physical connections

*rocedure

1. Select the odes involved in the creation o6 the physical connectivity

2. ,ssue "#ctions Physical +isco<er Physical 1opology(

The E3iscover *hysical TopologyF =iGard is opened

!. *ut "#ction selection = #utomatic >eneration o; 1raceIdenti;ier(

>. Clic5 on "&e7t(

/. Chec5 that all the desired nodes appear in the "&ode( =indo=. To addthe issing nodes< right-clic5 the in the ap issue "$end to

+isco<er Physical 1opology &ode(

. Clic5 on "#pply(

". Chec5 in the Log that the Trace ,denti6ier has 7een sent to the S3

ports o6 the desired nodes8. See neLt slide




Section ! ) (odule 1 ) *age !0




*rocedure ?cont.@

8. 3o E?ac5 F in the =iGard

&. *ut "#ction selection = Physical Connecti<ity ;rom @)(

10.Clic5 on "&e7t( 11.Chec5 that all the desired nodes appear in the "&ode( =indo=. To add

the issing nodes< right-clic5 the in the ap issue "$end to


Leave "Implement( to "*alse(

12.Clic5 on "#pply(

1!.Chec5 in the Log that the relevant *hysical Connections have 7eencorrectly created








'aple

1. Select the odes involved in thecreation o6 the physical connectivity

2. ,ssue "#ctions

Physical +isco<erPhysical 1opology(








'aple ?cont.@

!. *ut "#ction$election = #utomatic>eneration o; 1raceIdenti;ier(

>. Clic5 on "&e7t(




Section ! ) (odule 1 ) *age !!




'aple ?cont.@

/. Chec5 that the selectednodes appear in the"&ode( section

. Clic5 on "#pply(




Section ! ) (odule 1 ) *age !>




'aple ?cont.@

"a. ,ssue ".ore 0og( in the=iGard

"7. Clic5 E3etailsF andchec5 that theTrace ,denti6ier has7een sent andupdated in the S3ports o6 the nodes

8. To close the Log=indo=< Options Close Log




Section ! ) (odule 1 ) *age !/




'aple ?cont.@

&. 3o E4ac5F

10. *hysicalConnectivity6ro I0

11. et








'aple ?cont.@

12. Chec5 that all theselected node appearsin the "&ode( =indo=

1!. Clic5 on

"#pply(

Seeotes

,6 E,pleentF is set to ETrueF9 the proper et=or5 (anageent application9 i6 installed9 =ill try to

ipleent the *hysical connection9 so instantiating all the transission o7;ects Trails9 Lin5 connections9 JD=hich are necessary 6or the anageent o6 the physical connection at net=or5 layer. See the speci6icdocuentation o6 the proper et=or5 (anageent application S39 B3(9 etc.D 6or details.




Section ! ) (odule 1 ) *age !"




'aple ?cont.@

1>. ave a loo5 at theLog to chec5 thatthe relevantphysical

connections have7een correctlycreated








'aple ?cont.@

*rocedure result




Section ! ) (odule 1 ) *age !&



!.2 ploading the B3( internal O*S*hysical Connections 12L(D




Section ! ) (odule 1 ) *age >0



!.2 ploading the B3( internal O*S *hysical Connections 12L(D

*rocedure

PrereAuisite, The user ust already have con6igured the 12L( internalconnectivity using the option "Con;igure ConnectorsBCa2ling(

1. Select the ode or ore than oneD involved in the creation o6 thephysical connectivity2. ,ssue "#ctions Physical +isco<er Physical 1opology( The E3iscover *hysical TopologyF =iGard is opened

!. *ut "#ction selection = Physical Connecti<ity ;rom -+.Internal Ca2le(

>. Clic5 on "&e7t( /. Chec5 that the selected node appears in the "&ode( =indo=9

other=ise right-clic5 the ode in the ap and issue "$end to


. Select the desired option into the "Implement( 7o". Clic5 on "#pply( 8. Chec5 in the Log that the relevant *hysical Connections have 7een

correctly created








'aple

1. Select the desired ode

2. ,ssue "#ctions

Physical

+isco<er Physical1opology(








'aple ?cont.@

!. *ut "#ction$election =PhysicalConnecti<ity ;rom-+. InternalCa2le(

>. Clic5 on "&e7t(




Section ! ) (odule 1 ) *age >!




'aple ?cont.@

/. Chec5 that theselected nodeappears in the

EodeF =indo=

". Clic5 on EApplyF

. Select the desired optioninto the E,pleentF 7oi6 E,pleent TrueF9OC-CT*s and OC-Lin5sare created ?K@D

?K@ The internal *hysical connections are9 at least in this eaple9 O*S Lin5s. As such9 they support no

O(S-CT*9 O(S-Lin5s or O(S-Trails.




Section ! ) (odule 1 ) *age >>




'aple ?cont.@

8a. ,ssue E(ore LogF in the=iGard

87.Clic5 on the EploadToolsF Operation9clic5 on E3etailsF andchec5 that therelevant physicalconnections have7een correctlycreated.ote that thecreation andipleentation o6the *hysicalConnections iply asside e66ect the

discovery o6 theOC9 OT and O3trails.




Section ! ) (odule 1 ) *age >/



!.! ploading the B3( OTS *hysicalConnections 18!0*SSD




Section ! ) (odule 1 ) *age >



!.! ploading the B3( OTS *hysical Connections 18!0*SSD

*rocedure

1. Select the odes involved in the creation o6 the physical connectivity

2. ,ssue "#ctions Physical +isco<er Physical 1opology(

The E3iscover *hysical TopologyF =iGard is opened

!. *ut "#ction selection = Physical Connecti<ity ;rom &'(

>. Clic5 on "&e7t(

/. Chec5 that the desired nodes appear in the "&ode( =indo=9 other=iseright-clic5 the ode in the ap and issue "$end to +isco<erPhysical 1opology &ode(

. Leave "*alse( in the "Implement( 7o KD

". Clic5 on "#pply(

8. Chec5 in the Log that the relevant *hysical Connections have 7eencorrectly created

's in the sae '(L,(

KD o ipleentation is reHuired 6or OTS physical connections 7et=een 18!0*SS nodes.




Section ! ) (odule 1 ) *age >"



1830 PSS1830 PSS--3232

C33C33

1830 PSS1830 PSS--1616

C34C34


'aple

1. Select the desired odes.'ven one is enough.

2. ,ssue "#ctions

Physical


Slot 2

AL*% AL*%

Slot &








'aple ?cont.@

!. *ut "#ction $election= PhysicalConnecti<ity ;rom&'(

>. Clic5 on "&e7t(




Section ! ) (odule 1 ) *age >&




'aple ?cont.@

/. Chec5 that the selectednodes appears in the EodeF =indo=

". Clic5 on EApplyF

. Leave E:alseF in the E,pleentF 7o




Section ! ) (odule 1 ) *age /0




'aple ?cont.@







!.> ploading the radio lin5s &/00(*RD








*rocedure

1. Select the odes involved in the creation o6 the physical connectivity2. ,ssue "#ctions Physical +isco<er Physical 1opology(

The E3iscover *hysical TopologyF =iGard is opened!. *ut "#ction selection = 4adio Physical 0in5s ;rom /#.( >. Clic5 on "&e7t( /. Chec5 that the desired nodes appear in the "&ode( =indo=9 other=ise

right-clic5 the ode in the ap and issue "$end to +isco<erPhysical 1opology &ode(

. Clic5 on "#pply( ". A Be7 7ro=ser =indo= is opened containing the operation log< chec5

that the relevant *hysical Connections have 7een correctly created

Only the 6ollo=ing 5inds o6 radio lin5s are autoatically discovered< aD 1P0 con6iguration< the (ain Lin5Q 7D 1P1 con6iguration< the (ain Lin5 spare Lin5 has to 7e anually createdDQ cD K1P1D con6iguration< the Active Lin5.

OA( Operations Adinistration (aintenanceD< it is a 1!/0O(SMs process responsi7le 6or soe 6unctions<

sho= reote inventory9 ping '9 '-SB do=nload9 (,4 7ac5up9 CL,9 ' scheduled 7ac5upNSB (gt9 'auto-discovery9 pass=ord anageent9J




Section ! ) (odule 1 ) *age /!




'aple

1. Select the desired odes

2. ,ssue "#ctions

Physical





Section ! ) (odule 1 ) *age />




'aple ?cont.@

!. *ut "#ction selection= 4adio Physical0in5s ;rom /#.(

>. Clic5 on "&e7t(




Section ! ) (odule 1 ) *age //




'aple ?cont.@

/. Chec5 that theselected nodesappear in the EodeF =indo=

. Clic5 on EApplyF




Section ! ) (odule 1 ) *age /




'aple ?cont.@

pload *ailure case

'(L ' 10/N!M

•10/< is the nu7er o6 the '(L,( '(L,(COR4AS(*D that anages the '. ,t corresponds to the ' E'(L 3oainF attri7ute.

•!< is the ' identi6ier

•you can read the in the ' list

node M"/M

•"/< is the node identi6ier

•you can read it in the node list

S3 ' M/"M •to get it< (ain tool7ar Search *hysical '(L 3oainsQ then9 select the ne%roup right clic5 Search 's




Section ! ) (odule 1 ) *age /"


3 · 3 ·57CO*R,%T © ALCAT'L-LC'T 2012. ALL R,%TS R'S'R$'3.

'ercise

4ased on the net=or5 availa7le 6or the training course< create a suita7le su7-net=or5 hierarchy

create the *hysical Connections 7y using 7oth the anual and the autoaticupload procedure

Chec5 the physical connection structure

Tie allo=ed< 1/ inutes







> ighlight




Section ! ) (odule 1 ) *age /&



> ighlight

,ntroduction

The o7;ects that can 7e highlighted are soe o7;ects created 7y eans o6*hysical or OT enus

ode9 *hysical Connection9 *ath9 Trail9 ...Only one o7;ect can 7e highlighted at a tie.

3isa7le highlight ode

To clear the currenthighlight

Add to highlights

To highlight the selectedo7;ect and to add it to

the ighlight ta7le

3isplay ighlights

To open theighlight ta7le






3 · 3 ·6)CO*R,%T © ALCAT'L-LC'T 2012. ALL R,%TS R'S'R$'3.

> ighlight

ode

prior to highlighting

another o7;ect

The su7-net=or5 that contains theode is autoatically opened and

the ode is highlighted

1. Select the ode

2. Clic5

!. The node







> ighlight

*hysical Connection

The su7-net=or5 that contains the*hysical Connection is autoatically

opened and highlighted

dou7le-clic5 thesu7-net=or5

highlighted *hysical Connection







3iscover the highligt tool

3iscover

Tie allo=ed< / inutes







'nd o6 odule*hysical connections



Copyright © 2012 Alcatel-Lucent. All Rights Reserved.TOS!01"#$!.1-S%-R&.-'d1 (odule !.) 'dition 1

Section ! * (odule ) * +age 1

,,S'C



(odule )Co//issioning and +oer alancing or 13!0 +SS

TOS!01"#$!.1-S%-R&.-'d1 (odule !.) 'dition 1


1!40 O(S '(L







1!40 O(S '(L * R&. Operation and (aintenanceSyste/ Operation * Co//issioning and +oer alancing or 13!0 +SS

3 · 4 · 2CO+5R%6T © ALCAT'L-L7C'T 2012. ALL R%6TS R'S'R$'8.

lan9 page

This page is let :lan9 intentionally

8ocu/ent 6istory

'dition 8ate Author Re/ar9s

01 2012-11-03 $allet; carole <irst edition




Section ! * (odule ) * +age !



(odule o:=ectives

7pon co/pletion o this /odule; you should :e a:le to>

8escri:e the generalities a:out the co//issioning and poer :alancing eatureor 13!0+SS netor9s

Carry out the /ain provisioning and co//issioning procedures or 13!0+SSnetor9s




Section ! * (odule ) * +age )



(odule o:=ectives ?cont.@

This page is let :lan9 intentionally







Ta:le o contents

S0itch to notes vie0 +age

1 Generalities and CPB integration in 1350 OMS "2 Overview on CPB commands 13 Imort t!e "P# commissioning $ile 224 Imort %" data to CPB 2"5 Provision s&stem '(sing Plan) 31* Initial+Green$ield '(sing Plan) 40, Create -oss .eort 4&/ Power Balance s&stem 5) "ort ile $or "P# *1




Section ! * (odule ) * +age


3 · 4 · *CO+5R%6T © ALCAT'L-L7C'T 2012. ALL R%6TS R'S'R$'8.

Ta:le o contents ?cont.@

S0itch to notes vie0 +age




Section ! * (odule ) * +age "


3 · 4 · ,CO+5R%6T © ALCAT'L-L7C'T 2012. ALL R%6TS R'S'R$'8.

1 %eneralities and C+ integration in1!40 O(S






3 · 4 · /CO+5R%6T © ALCAT'L-L7C'T 2012. ALL R%6TS R'S'R$'8.

1 %eneralities and C+ integration in 1!40O(S

'+T B C+

n deploying and operating an 13!0+SS netor9; three stages areoreseen>

1. etor9 +lanning using the 'ngineering and +lanning Tool '+TD2. %reenield co//issioning o the netor9

!. Ongoing /aintenance and netor9 upgrade

Co//issioning and +oer alance C+D addresses the co//issioningphase and also helps the operator during the ongoing /aintenance iththe Loss Report and +oer alancing options

report :ased on thecurrent po0er valuesagainst the target ones

to apply ne0 target po0er values and po0er :alance




Section ! * (odule ) * +age &


3 · 4 · CO+5R%6T © ALCAT'L-L7C'T 2012. ALL R%6TS R'S'R$'8.


Syste/

13!0+SS netor9 /ust :e deco/posed :y the '+T user into Rings or+oint-to-+oint Syste/s

'ach Syste/ has to :e co//issioned separately

+oint to point

Ring

A Syste/ /ay include several 's








Splitting netor9 into Syste/s eEa/ple

%" 1

C.///'24)

C-S1

C-S2

C-S3

C-S4

C-S/C-S/

C! 53

C1 -1

C2 11P64 -2

C3 '213) -3

C4 -4

OM7

C-S1

C-S2

6n& C!C./'2/)

C./'14)

C.///'14)

C./'1/)

C./'1/)

68P8G'1*)

68P-G'12)

68P-G'12)

68P8G'1*)

6-P8G

'22)

6-P8G'2*)

C-S1 C-S2 C-S3 C-S4 C-S5 C-S*

C-S1 C-S2 C-S 3 999: C-S, C-S/ C-S1 C-S2 C-S3 C-S4 C-S5 C-S*


S<8)) 2D

TL24D

' O

#8.;

C-S/

C-S/

<ro/11STAR1 L11-14D

C! 35<ro/)8+A) L11-4D

10G"-6%C! 30

<ro/11ST%'12 L11-3D

6n& C!

-4 -3 -2 -1

11P64'113)

C4 C3 C2 C1

C! 30 6n& C!

10G"-6%

-1

11S#G"12'11/)

C1 C2 9: C12

G<"

6n& C!

-1 -2

117P"12'11*)

C1 C2 9: C12

-1 -2

47P64'11)

C1 C2 C3 C4

C! 35

S#M4 1G<"1G<"

%" 2

%" 3

S & s t e m 1S & s t e m 2

CLS connections :eteen theCFR :oards

the ring /ust :e split in to+oint-to-+oint Syste/s








Co//issioning scenarios

n case o ring Syste/ assu/ing that at least a pre-a/pliier is present oneach OTSD>

co//issioning is comletel& acco/plished leveraging on the light sourcerepresented :y the AS' A/pliier Spontaneous '/issionD

n case o +oint-to-+oint Syste/> co//issioning is carried out in to steps>

1.co//issioning is only artiall& acco/plished leveraging on the light sourcerepresented :y the AS' :ecause the nodes that are not ed :y any light source e.g.

AS'D cannot :e conigured

2.the co//issioning o the re/aining nodes reGuires the operator to create a dedicatedservice; that can :e disrupted ater the tas9 co/pletion or can :e 9ept or real traic








+oint-to-+oint Syste/ co//issioning

%" 1

C.///'24)

C-S1

C-S2

C-S3

C-S4

C-S/C-S/

C! 53

C1 -1

C2 11P64 -2

C3 '213) -3

C4 -4

OM7

C-S1

C-S2

6n& C!C./'2/)

C./'14)

C.///'14)

C./'1/)

C./'1/)

68P8G'1*)

68P-G'12)

68P-G'12)

68P8G'1*)

6-P8G

'22)

6-P8G'2*)


C-S1 C-S2 C-S 3 999: C-S, C-S/ C-S1 C-S2 C-S3 C-S4 C-S5 C-S*


S<8)) 2D

TL24D

' O

#8.;

C-S/

C-S/

<ro/11STAR1 L11-14D

C! 35<ro/)8+A) L11-4D

10G"-6%C! 30

<ro/11ST%'12 L11-3D

6n& C!

-4 -3 -2 -1

11P64'113)

C4 C3 C2 C1

C! 30 6n& C!

10G"-6%

-1

11S#G"12'11/)

C1 C2 9: C12

G<"

6n& C!

-1 -2

117P"12'11*)

C1 C2 9: C12

-1 -2

47P64'11)

C1 C2 C3 C4

C! 35

S#M4 1G<"1G<"

+oint conigured ith thehelp o AS'

+oint s9ipped due to AS'unavaila:ility

%" 2

%" 3

S & s t e m 1S & s t e m 2




Section ! * (odule ) * +age 1!




+rereGuisites to use C+ in 1!40 O(S

The netor9 is planned using '+T

C+ co/ponent installed on the1!40 O(S server> C+ optionalD is pac9aged ith '(L

chec9 ith the syste/ ad/inistrator

13!0+SS 's /ust :e created andgiven an address :y 1!40 O(S '(L>

+hysical connections can either :ecreated or not. They are or sure

necessary or creating the service in+oint-to-+oint Syste/ co//issioning.




Section ! * (odule ) * +age 1)




etor9 Co//issioning /acro-steps

1. '+T 'ngineering +lanning ToolD

to :e used to design and plan the netor9

it provides an .E/l co//issioning ile per Syste/ that contains ino a:out> card types; position and /utual connectivity

/in and /aE values or span losses

port-to-port losses :eteen avelength trac9er detect points

a/pliier gains

...

2. 1!40 O(S

i/port the .E/l co//issioning iles provided :y '+T

co/parison o design data against installed eGuip/ent coniguration and

creation o connections :eteen cards optical +oer provisioning setting o no/inal valuesD and Co//issioning

setting o actual values :ased on real /easuresD

+oer alancing








Onards

C+ application in 1!40 O(S is addressed

o details a:out the co//issioning guidelines or 13!0+SS netor9s aregiven>

the trainee /ust already :e a/iliar ith the/

or details; please reer to the Hnstallation and Syste/ Turn-7p %uideI hich ispart o the Alcatel-Lucent 13!0+SS custo/er product docu/entation






3 · 4 · 1*CO+5R%6T © ALCAT'L-L7C'T 2012. ALL R%6TS R'S'R$'8.

2 Overvie on C+ co//ands




Section ! * (odule ) * +age 1"


3 · 4 · 1,CO+5R%6T © ALCAT'L-L7C'T 2012. ALL R%6TS R'S'R$'8.


Optical 's and Syste/ lists






3 · 4 · 1/CO+5R%6T © ALCAT'L-L7C'T 2012. ALL R%6TS R'S'R$'8.


Actions




Section ! * (odule ) * +age 1&




Operations ro/ Optical Syste/ list> Status

These HstatusI 0indo0s have :eenretrieved ater C+ co/pletion.

They are created :y theco//ands that 0eJll see on0ards.








Operations ro/ Optical Syste/ list> Logs

L o g s

2 o r

.

.

.








Operations ro/ Optical Syste/ list> Sho Loss Report

+rovided :y ...







! /port the '+T co//issioning ile














a/pliier gains

...

2. 1!40 O(S i/port the .E/l co//issioning iles provided :y '+T

co/parison o design data against installed eGuip/ent coniguration andcreation o connections :eteen cards

optical +oer provisioning setting o no/inal valuesD and Co//issioningsetting o actual values :ased on real /easuresD

+oer alancing








6o to do

1. Search

Co//ission and+o0er alance Optical Syste/

!. See neEt slide

2. Select the Syste/ Search

7pload +lan <ile








6o to do ?cont.@

!. =Browse> to search or thedesired co//issioning ilein the local +CJs ile syste/

). <ileJs na/ecan :e edited

4. 7pload <ile

nternet 'Eplorerindo








6o to do ?cont.@

. Fait or the uploadto co/plete







) /port ' data to C+














a/pliier gains

...


co/parison o design data against installed eGuip/ent coniguration andcreation o connections :eteen cards imort %" data to CPB

Provision s&stem '(sing Plan)


+oer alancing








6o to do

!. Apply

2. H+lan <ileI /ust :e selected

1. Actions Co//issionand +o0er alance

8iscover 's using +lanD




Section ! * (odule ) * +age !0




6o to do ?cont.@

). Fait or the header gets green.t /ay ta9e so/e /inutes.

4. Search

Co//ission and

+o0er alance

Optical 's

. Chec9 that the 's ith related inohave :een correctly i/ported>

Search C+ Optical 's

So/e /inutes are necessary to co/plete the process; :ased on the nu/:er o 's to :e discovered.

tJs possi:le to dou:le chec9 that the discovery is ongoing loo9ing at the Logs - the ta: near:y (aps; Lists;%raphical.







4 +rovision syste/ using +lanD














a/pliier gains

...





+oer alancing




Section ! * (odule ) * +age !!




+rovision syste/ using +lanD

$alidates the ' hardare inventory co/paring '+T plan ith cardsinstalled in ield.

Creates the internal i:er connections :eteen the circuit pac9s.Loads the target poer values on the conigura:le cards L8; EFRy;...D.<ails in case o co/parison /is/atch.

Actions

Co//ission and+o0er alance

+rovision syste/using +lanD




Section ! * (odule ) * +age !)




Select the Syste/

1. Select the Syste/and the +lan <ile

2. eEt








Chec9 the 's

's that :elong to the Syste/

eEt








Select the Options

Reer to theco//issioning

reco//endationsor setting the

para/eters

Then clic9 eEt

Select thecorrect option




Section ! * (odule ) * +age !"




Start the auto/atic procedure

OK








See the results

+rovision 8etail Status




Section ! * (odule ) * +age !&




See the results> ailure details

so/e actions are notco/pleted correctly; theStatus is set to H<ailedI and

the procedure stops. Clic9 onthe H+rovision 8etail StatusI icon to see the details.




Section ! * (odule ) * +age )0



nitial%reenield using +lanD














a/pliier gains

...





+oer alancing









Co//issioning to set up the target poer values on the conigura:lecards L8; EFRy;...D in order to /atch the or9ing condition envisaged :y

'+T. AS' poer is used to peror/ co//issioning on Ring syste/s and on theinter/ediate 's in +oint-to-+oint syste/s.

Actions Co//ission

and +o0er alance -nitial%reenieldusing +lanD




Section ! * (odule ) * +age )!




Setting the co//issioning para/eter

Report <ile isauto/atically illed in

eE t

Clean state> co//issioning starts ro/ scratch

Continue Co//issioning> resu/e a previous co//issioning that ailed




Section ! * (odule ) * +age ))




Setting the co//issioning para/eter ?cont.@

Appl y Outco/e in neEt slide

Reer to theco//issioning

reco//endationsor setting thepara/eters

Select thecorrect option








Chec9 the eEecuted operations








<ailure details

so/e actions are notco/pleted correctly; the

Status is set to H<ailedI andthe procedure stops.

Clic9 on the H+rovision 8etailStatusI icon to see the details.




Section ! * (odule ) * +age )"




Sho Loss Report

1. Search Co//ission and +o0eralance Optical Syste/

2. Select the Syste/ andissue Search Sho0Loss Reports

!. Select the desiredreport and issueSearch Sho0 LossReport








Sho Loss Report ?cont.@

LossReport

<ile

yello highlighted cells>/easure not possi:le




Section ! * (odule ) * +age )&



" Create Loss Report








Create Loss Report

HCreate -oss .eortI generates a poer loss report :ased on thecurrent poer values against the target poer settings or the optical

do/ain. %reenield co//issioning and +oer alancing operations alays generate loss

reports.

To options>

HCreate Loss ReportI generates a report that su//ariMes the ailed auto poer/anage/ent; the status o the last ingressegress ad=ust/ent that asperor/ed or each '; and any co/ponents that are suspected to :e out ospeciication.

HCreate Loss Report using +lanDI generates a report; using an eEistingco//issioning ile ro/ '+T; that details the poer loss that occurs throughoutthe optical netor9ing syste/.








ssue the FiMard

Actions Co//ission and +o0eralance HCreate Loss ReportI orHCreate Loss Report using +lanDI








Create Loss Report

1. Select the ' and itsdesired 'gress port

2. nsert a na/e orthe Loss Reportile. tJs 6T(L.

!. Apply

The generated Loss Report ile can :e opened using the procedure already descri:ed or Hnitial%reenield

Co//issioningI>

1D Select the Optical Syste/ Search Sho0 Loss Reports

2D Select the desired report Search Sho0 Loss Report

The report ile is put in the su:directory>

usrSyste/s'(L#Nnstance/aintenancecp:reports








Create Loss Report using planD

1. Select the +lan <ile


!. Apply

The generated Loss Report ile can :e opened using the procedure already descri:ed or Hnitial%reenield Co//issioningI>

1D Select the Optical Syste/ Search Sho0 Loss Reports 2D Select the desired report Search Sho0 Loss Report









3 +oer alance syste/














a/pliier gains

...





+oer alancing








+oer alance syste/

t is peror/ed to> apply ne target poer values and poer :alance the optical do/ain ith the services

present.Or

co/plete the poer ad=ust/ent during co//issioning once the dedicated service iscreated.

t can :e done> y using a +lan ile ro/ '+T - +oer alance syste/ 7sing +lanD.

Or

y selecting an ' in the optical do/ain - +oer alance syste/.

n this case the user has to select a node and one o its egress ports to start the poer:alancing operation.







Actions Co//issionand +o0er alance

H+o0er alance syste/I orH+o0er alance syste/using +lanDI


+oer alance syste/ ?cont.@








+oer alance syste/

1. Select the ' and the

'gress port ro/hich the :alancingoperation has to start


!. Apply










+oer alance syste/ using +lanD

1. Select the +lan <ile


!. OK








3 · 4 · *0CO+5R%6T © ALCAT'L-L7C'T 2012. ALL R%6TS R'S'R$'8.

Be$ore?


Loss Report

%ow

1D Select the Optical Syste/ Search Sho0 Loss Reports

2D Select the desired report Search Sho0 Loss Report







& 'Eport <ile or '+T








6o to do

1!40O(S can generate an .E/l ile containing the eGuip/ent conigurationand eEport it to '+T or possi:le netor9 re-design.

The .E/l ile is saved in the directory> usrSyste/s'(L# N'(L#-nstance C+#COR'eEport

1. Actions

Co//ission and+o0er alance

'Eport ile or '+T








6o to do ?cont.@

2. Clic9 the icon to select

the eGuip/ent hoseconiguration /ust :eeEported

!. Apply






3 · 4 ·*4CO+5R%6T © ALCAT'L-L7C'T 2012. ALL R%6TS R'S'R$'8.

Anser the Guestions

Fhich are the three stages oreseen in deploying and operationg an13!0+SSP

List the co//isionning /acro steps.






3 · 4 ·*5CO+5R%6T © ALCAT'L-L7C'T 2012. ALL R%6TS R'S'R$'8.

'nd o /oduleCo//issioning and +oer alancing or 13!0 +SS





,,S'C



(odule )' (anage/ent

TOS!01"#$!.1-S%-R&.-'d1 (odule !.) 'dition 1


1!)0 O(S '(L







1!)0 O(S '(L * R&. Operation and (aintenanceSyste/ Operation * ' (anage/ent

3 · 5 · 2CO+R%T © ALCAT'L-LC'T 2012. ALL R%TS R'S'R$'3.

4lan5 page


3ocu/ent istory









(odule o7;ectives

pon co/pletion o6 this /odule9 you should 7e a7le to<

3escri7e the status o6 the et=or5 'le/ent

%rant the access to the local operator

Align the et=or5 'le/ent>s ti/e to the 1!)0 O(S>s one

Retrieve the et=or5 'le/ent>s card list as re/ote inventory

Reset the net=or5 'le/ent




Section ! * (odule ) * +age ?



(odule o7;ectives @cont.








Ta7le o6 contents

S=itch to notes vie=B +age

1 NE status "2 Granting access to Craft Terminal 1?3 NE time and NTP 224 Remote inventory 3)?.1 Re/ote nventory as tet 6ile 6or a single ' !&?.2 Re/ote nventory as a list in the (S-% 6or one or /ore 's ??5 Resetting an NE from Eui!ment "ie# 48




Section ! * (odule ) * +age


3 · 5 · $CO+R%T © ALCAT'L-LC'T 2012. ALL R%TS R'S'R$'3.

Ta7le o6 contents @cont.

S=itch to notes vie=B





Section ! * (odule ) * +age "


3 · 5 · %CO+R%T © ALCAT'L-LC'T 2012. ALL R%TS R'S'R$'3.

1 ' status






3 · 5 · &CO+R%T ©A LCAT'L-LC'T 2012. ALL R%TS R'S'R$'3.

1 ' status

3isplaying ' states

An auto/atic re6resh is per6or/edperiodically

To chec5 that the ' statesdisplayed are up to date9per6or/ a /anual re6resh<1. Select the ' in the et=or5

'le/ent List2. Right clic5 on it and choose

'(ctions Resync)roni*e+

:ro/ the et=or5 'le/ent list9select an ' right clic5

Actions %et ' Current Status

The Co//unication state D' Reacha7ilityE is sho=n in the F%et ' Current StatusG =indo= =ith the t=o

possi7le values<,isa-led H Correspondent to the F.nreac)a-leG state

Ena-led H Correspondent to the FReac)a-leG state




Section ! * (odule ) * +age &


3 · 5 · /CO+R%T ©A LCAT'L-LC'T 2012. ALL R%TS R'S'R$'3.

1 ' status

Alar/ status

The alar/ state indicates the /ost critical alar/ present on the '

Critical

(a;or

(inor

Iarning

Cleared

no alar/

-ndeter/inate the severity level cannot 7e de6ined 7y the resources =hich raise the alar/






3 ·5 ·10CO+R%T ©A LCAT'L-LC'T 2012. ALL R%TS R'S'R$'3.

1 ' status

Supervision state

3'CLAR'3

S+'R$S'3

ACT$AT%3'ACT$AT%

Sta7le states Transient states

Starting

supervisionJ

StoppingsupervisionJ

Supervision state

declared< the ' is si/ply created in the OS (4 7ut is not supervised supervised < the ' is under supervision

activating< supervision is 7eing started Dno /anage/ent tas5 can 7e per6or/ed on the 'E

deactivating < supervision is 7eing stopped Dno /anage/ent tas5 can 7e per6or/ed on the 'E







1 ' status

Align/ent state

Sta7le states

Transient states

≠

K

1!)0O(S

(SAL%'3

AL%'3

AL%% +

(4

1!)0O(S

A3T%

(4

1!)0O(S

(4

1!)0O(S(4

1!)0O(S

(4

Align/ent state<

(isaligned < The ' (4 and its i/age in the OS are not identical. Typically9 the ' is in this state=hen<

The Supervision state is F3eclaredG

n case o6 ! or S(+ '9 =hen the co//unication lin5 7et=een the '(L and the ' isdo=n DCo//unication state K nreacha7leE

n case o6 18)0TSS-!20 (S++ '9 =hen the pri/ary D!E or the secondary DS(+E or 7oththe co//unication lin5s are do=n

.4.< n case only one o6 the co//unication lin5s is do=n9 the Co//unication statestays in Reacha7le

3uring the align/ent phase9 DAligning up or do=n or AuditingE9 the sho=n Align/ent State is still F(isalignedG. t turns into FAlignedG =hen the align/ent phase is 6inished

Aligning 2p < The syste/ is per6or/ing a F(4 Align p=ardsG operation. o operation can 7e doneon the '

Auditing < The ' is under OS supervision and the syste/ is co/paring the ' (4 =ith its i/age inthe OS

Aligned < the syste/ 7eco/es aligned =hen all the operations 6or synchroniMing the '(L =ith the 'are 6ully co/pleted. The synchroniMation procedure involves the alar/s9 the +( and '.







1 ' status

Co//unication state H ' reacha7ility

R'ACA4L'

R'ACA4L'

'(L has lostco//unication =ith

the eNuip/entJ

1!)0 O(S

1!)0 O(S The eNuip/ent can7e reached 7y the'(L J

Co//unication state

2nreacha7le < The Co//unication 7et=een the OS and the ' is interrupted

Reacha7le < The OS can co//unicate =ith the '

2nde6ined < The address hasn>t yet 7een assigned to the '

N 6 the eNuip/ent is an 18)0TSS-!20 1.? in (S++ con6iguration9 it has a dou7le co//unication lin5=ith the OS D! and S(+E. n this case the Co//unication state is nreacha7le only in case 4OT thelin5s are do=n.






3 · 5 ·13CO+R%T © ALCAT'L-LC'T 2012. ALL R%TS R'S'R$'3.

'ercise

Chec5 the status o6 the ' in training net=or5

Ti/e allo=ed< 2 /inutes




Section ! * (odule ) * +age 1?



2 %ranting access to Cra6t Ter/inal








(S-% co//ands

2. Select'Granted+ or',enied+

1. ssue '(ctions (ccess

4tate+

Local Access Control 3enied Dde6ault 6or a supervised 'E ' /anaged 7y the OS only Cra6t Ter/inal

has read-only rights

can as5 6or the access in case o6 the OS is FpendingG Local Access Control %ranted Dde6ault 6or a not supervised 'E Cra6t Ter/inal can /anage the '

The OS continues to receive and process alar/s and per6or/ance data. :or so/e 5inds o6'9 the OS can /anage the '9 too.

A6ter con6ir/ation9 the FLocal Access ControlG attri7ute is updated.

:or ! 's9 it>s possi7le to /anage the Local Access 7y /eans o6 'Nuip/ent $ie=.

'4u!ervision (ccess 4tate ocal+ DgrantedE or 64+ DdeniedE

The Local access state is al=ays 'Granted+ 6or the 18!0+SS up to R!.0.

So/e S(+ 's do not support this 6eature. :or the 's not supporting this 6eature it is not possi7le togrant CT access =hile the '(L is supervising the eNuip/ent.






3 · 5 · 1$CO+R%T © ALCAT'L-LC'T 2012. ALL R%TS R'S'R$'3.


'66ect< ea/ple 6or 18)0TSS-!20

'Nuip/ent $ie=

C

%reen

Light 7lue

FSaveG OT availa7le

FSaveG availa7le

Local Access K %ranted

n the opposite case9 that is FLocal Access K 3eniedG9 the con6iguration co//ands are availa7le in

'Nuip/ent $ie=9 =hereas are not availa7le in CP the F5eyG color changes accordingly.






3 · 5 · 1%CO+R%T © ALCAT'L-LC'T 2012. ALL R%TS R'S'R$'3.


'66ect< ea/ple 6or 18)0TSS-100

'Nuip/ent $ie=

C

Local Access K 3enied

F3eclareG availa7le

F3eclareG OT availa7le

The F5eyG is sho=n and green in 7oth the vie=s

Local Access K %rantedsee net slide

The /odi6ication o6 the Local Access 6or 18)0TSS-100 6orces 'Nuip/ent $ie= and C logout.

1!)0O(S and C /ust use di66erent users.

The ea/ple concerns Fad/inG users.






3 · 5 · 1&CO+R%T © ALCAT'L-LC'T 2012. ALL R%TS R'S'R$'3.


'66ect< ea/ple 6or 18)0TSS-100 @cont.

'Nuip/ent $ie=

C

Local Access K %ranted

F3eclareG availa7lein 7oth the vie=s

o F5eyG in 7oth the vie=s






3 · 5 · 1/CO+R%T © ALCAT'L-LC'T 2012. ALL R%TS R'S'R$'3.


'66ect< ea/ple 6or 10S(

'Nuip/ent $ie=

Local Access K %rantedCra6t Ter/inal

FSetG OT availa7le

FSetG availa7le

F5eyG is %reen

LCA is light 7lue








ote 6or 18)0TSS-!20 R1.?

3ue to the dual /anage/ent do/ain o6 the ?% ! 's D! agent andS(+ agentE9 the Access State /anage/ent needs a speci6ic handling<

:ro/ the et=or5 'le/ent list the access state is directly /anaged only on the! /anage/ent do/ain. The access state to the S(+ do/ain /ust 7e 6urtherhandled in the data S(. navigate 6ro/ 'Nuip/ent $ie= to the data S(

Select the ++20% card Ddata processorE and then FEui!ment ,ata 2oard Navigation+

grant the access 4u!ervision (ccess 4tate Granted

3ataS(

n the S(+ do/ain

•

6 F%rantedG is selected9 the CT has access to the S(+ do/ain only i6 the Access state has 7eenpreviously set to FLocalG 7y the '(L operator 6ro/ the ' list.

• 6 FOSG is selected9 the CT has no access to the S(+ do/ain only i6 the Access state has 7eenpreviously set to FOSG 7y the '(L operator 6ro/ the ' list.







'ercise

%ive the access to the cra6t ter/inal

Chec5 the local access control state

Ti/e allo=ed< ) /inutes







! ' ti/e and T+







! ' ti/e and T+

et=or5 Ti/e +rotocol

T+< to synchroniMe the date and ti/e o6 the 's =ith a ti/e source thattypically is the server hosting the 1!)0 O(S.

The 1!)0 O(S realigns the ti/e o6 all the supervised 's every 2? hours7y de6ault.

T+ con6iguration<

in 1!)0 O(S< T+ /ust have 7een ena7led during 1!)0 O(S installation

in 's< T+ is auto/atically activated upon ' supervision

The 1!)0 O(S '(L server>s address is used as '7ain NTP 4erver (ddress+

T+ types<

! 's rely on OS T+

TL1 's rely on + T+




Section ! * (odule ) * +age 2?



! ' ti/e and T+

T+ in ! 's

2. Set '8alse+ todisa7le9 'True+ to ena7le theT+ protocol

!. Chec5 the OS address o6 the T+server in the FT+ OSG 6older ?. '(!!ly+

1. Right-clic5 on the ' and issue<

FActions T+ con6igurationG







! ' ti/e and T+

T+ in ! 's @cont.

n 'Nuip/ent $ie=< Configuration Comm9Routing NTP 4erver Configuration







! ' ti/e and T+

T+ in TL1 's

Right clic5 the '< (ctions NTP configuration

1.Set '8alse+ todisa7le9 'True+ to ena7le the

T+ protocol

2. Chec5 the +address o6 theT+ server in

the FT+ +G 6older

!. '(!!ly+

Ihen =or5ing =ith 18!0+SS9 /a5e sure no T+ servers have 7een con6igured 7y the local cra6t ter/inal

operator. 6 it is so9 then re/ove the /anually con6igured T+ servers 7y the FSho= 'Nuip/entG =indo=.







! ' ti/e and T+

T+ state in the ' List

TL1 's are

synchroniMed 7yan + T+ server

! 's are

synchroniMed 7y anOS T+ server







! ' ti/e and T+

Re/inder

The date and ti/e sho=nin the (S-% are the

+C>s






3 ·5 ·2/CO+R%T ©A LCAT'L-LC'T 2012. ALL R%TS R'S'R$'3.

! ' ti/e and T+

%etting the ' ti/e

Select FActions Ti/e %et ' Ti/eG

This operation is allo=ed only i6 the ' is under supervision and its ' reacha7ility state is 'A4L'3.







! ' ti/e and T+

Setting ' ti/e

To align the ' ti/e to the OS ti/e

Select FActions Ti/e Set 'Ti/eG

t>s availa7le only i6T+ is disa7led.

'(L server local ti/e

' ti/e

n case o6 18!0+SS9 don:t use t)is !rocedure to set t)e NE time<

To /anually set the date and ti/e the user has to access the ' 7y the Cra6t Ter/inal Ddon>t useSho= 'Nuip/ent 7y the 1!)0O(SE.







! ' ti/e and T+

' ti/e in 'Nuip/ent $ie=< 18)0 TSS-!20

F' Ti/eG sho=n in(S-% is eNual to FCurrent Ti/eG Qthe T+ server ti/e

Mone

1. Syste/ (anage/ent et=or5 Ti/e +rotocol

2. t>s read-only. FSaveG co//and is unavaila7le.

n case o6 T+ ena7le<

FCurrent Ti/eG K FT+ server TC ti/eG Q FCurrent O66setG

FCurrent O66setG usually is null. t can 7e set 7y /eans o6 C.







! ' ti/e and T+

' ti/e in 'Nuip/ent $ie=< 18)0 TSS-100

1. n the 'Nuip/ent $ie=9 issueCo//u T+ con6ig

(S-% ti/e9 that is the +C ti/e

6 T+ is operational9 it>s eNualto the T+ server TC ti/e

FSaveG has no e66ect

3i66erence 7et=een FLocalti/eG and FTC ti/eG




Section ! * (odule ) * +age !!



! ' ti/e and T+

' ti/e in 'Nuip/ent $ie=< ! and ?% ! eNuip/ent

(S-% ti/e9 thatis the +C ti/e

1. n the 'Nuip/ent $ie=9 issue

Con6iguration ' Ti/e

2. 6 T+ is not ena7led9 it>spossi7le to align the ' ti/eto the OS ti/e 7y FSetG

6 T+ is operational9 it>s eNualto the T+ server local ti/e

:or ! and ?% ! eNuip/ent9 the FStart supervisionG action issued 6ro/ the '(L can ena7le the T+ on

the 'P the address o6 the '(L server is auto/atically =ritten as /ain T+ server in the 'co//routing con6iguration. As5 the syste/ ad/inistrator =hether this 6eature is ena7led.




Section ! * (odule ) * +age !?



3iscussion or Nuestion

Ihy is is crucial 6or the net=or5 /aintenance to have all '>s at the sa/eti/e re6erence




Section ! * (odule ) * +age !)



? Re/ote inventory






3 ·5 ·3$CO+R%T ©A LCAT'L-LC'T 2012. ALL R%TS R'S'R$'3.

? Re/ote inventory

+rovided in6o

Alcatel-Lucent denti6ier DA3E

nit Type D(ne/onic o6 the R..E

nit part nu/7erSo6t=are part nu/7er

CL' code

(anu6actory +lant

nit serial nu/7er

3ate identi6ier

3ate

R.. inventory 6ield 6or the custo/er

'a/ple< FAll inventoryG 6ro/18)0 TSS-100>s 'Nuip/ent $ie=

ALCAT'L-LC'T co/pany denti6ier< This 6ield contains the a77reviation o6 the co/pany using ?

characters DuppercaseE. :or instance< ATA9 ACT 9 AS'L 9 AT'L 9 ALCL.nit Type< The /ne/onic o6 the R.. gives in6or/ation a7out the type D6unctionE per6or/ed 7y the R..De.g. ST(1 O 9 (ATR 9....E. This /ne/onic is suggested to 7e identical to the printed na/e on the6ront panel o6 the unit.

nit part nu/7er< The nit +art u/7er is the Alcatel-Lucent code to identi6y the R.. This nu/7erincludes the CS at the end.

So6t=are part nu/7er< The So6t=are +art u/7er is the Alcatel-Lucent identi6ier o6 the resident so6t=aresupported 7y the R.. t is an Alcatel-Lucent code to identi6y the resident so6t=are o6 the R.. consideredas a single piece.

CL' code< CL' code is speci6ied in 4ellcore reco//endations. Ihen this 6ield is not used9 it is 6illed=ith 10 characters.

(anu6actory plant< t identi6ies the /anu6acturing plant =ithin the co/pany. ? characters to 7e used.nit serial nu/7er< This nu/7er speci6ies the /anu6acturing chronological nu/7er o6 this R.. type Dinthe current yearE.

3ate identi6ier< The date identi6ier speci6ies the /eaning o6 the date 6ield. The 6ollo=ing codes arestandardiMed<

00 /anu6acturing date =hich corresponds to the end o6 the test phase

01 date o6 the /anu6acturing order

02 date o6 /anu6acturing R .. lot

0! date o6 custo/er delivery

0? date o6 custo/er order

3ate< 3ate 6or/at< ((33. Ihen the year only is de6ined the 6ield shall 7e encoded as F----F.R.. inventory 6ield 6or the custo/er< This 6ield is reserved 6or the custo/er inventory in6or/ation. Thecusto/er data are loaded into the ''+RO( during the /anu6acturing process only.




Section ! * (odule ) * +age !"



? Re/ote inventory

o= to retrieve it

:ro/ et=or5 'le/ents list in (S-% to get all the 's> 7oards

re/ote inventory provided as tet 6ile 6or one ' at a ti/e

co//ands to use< Fpload Re/ote nventoryG and F3isplay Re/ote nventoryG

the 6ile is saved on the user>s +C

re/ote inventory provided as a list in the (S-% 6or one or /ore 's at a ti/e

co//ands to use< F%lo7al Re/ote nventoryG and FApplyG

:ro/ 'Nuip/ent $ie=

re6er to the docu/entation o6 the speci6ic eNuip/ent







. ! l o a d R ; 1 f i l e < 1 = t = t >

tet 6ile A

CS$ 6ile A ' G l o - a l R ; + $ f i l e s < 3 = C 4 " ? 3 = t = t >

1350 674

tet 6ile 4

tet 6ile C

(

C ' ( ! !

l y + G

l o - a l R

;

, i s ! l a y R ;

< e1 g1 N E C >

Overall list in (S-%< A9 49 C

tet 6ile C

.ser:sPC

Tet 6ile< R o6 C

CS$ 6ile 4

CS$ 6ile C

R< Re/ote nventory

? Re/ote inventory

Ior56lo=

NEs

Fpload Re/ote nventoryG creates a tet 6ile 6or the selected ' in the 1!)0 O(S '(L>s server<

•directory< usrSyste/sU'(L instanceVdatari

•6ile na/e< U'(L-( nu/7erV#U' identi6ierV.ri @e.g. 10!#2.ri

F' identi6ierG can 7e read in the Fet=or5 'le/entsG list in the Fdenti6ierG colu/n.

'very 6urther Fpload Re/ote nventoryG on the sa/e ' over=rites the previous tet 6ile.

F3isplay Re/ote nventoryG<

•it uploads the tet 6ile 6ro/ the 1!)0 O(S '(L>s server and puts it in the user>s +C. The tet 6ile couldhave 7een generated either 7y /eans o6 F%lo7al RG or Fpload RG.

• UdriveV<Wt/pWrunti/e3irWUserver + addressVWU+C>s userVWU'(L instanceVWdisplayRWscriptWU'(L-( nu/7erV#U' identi6ierV.tt

@e.g. C<Wt/pWrunti/e3irW1)1.&8.!!.&?Wpaolo#)0!W'(L#1-&.WdisplayRWscriptW10!#2.tt

•and then opens that 6ile.

F%lo7al Re/ote nventoryG <

•it creates in the 1!)0 O(S '(L>s server<

• one CS$ 6ile per '

• one tet 6ile per ' as the one created 7y /eans o6 Fpload Re/ote nventoryG9 or over=rites it i6already present in the server

•directory< usrSyste/sU'(L instanceVdatari

•

CS$ 6ile na/e< %LO4AL#R#yyyy-//-dd#hh-//-ss.ri @e.g. %LO4AL#R#2012-0?-21#21-)!-)).ri




Section ! * (odule ) * +age !&


3 · 5 · 3/CO+R%T © ALCAT'L-LC'T 2012. ALL R%TS R'S'R$'3.

?.1 Re/ote nventory as tet 6ile 6or asingle '




Section ! * (odule ) * +age ?0



?.1 Re/ote nventory as tet 6ile 6or a single '

pload

1. n the et=or5 'le/ents list9select the '

2. Right-clic5 and select FActions pload Re/ote nventoryG

!. Con6ir/ the choice =ith FesG

?. Iait 6or the /essage FOperationsuccess6ully co/pletedG








3isplay

1. :ro/ et=or5 'le/ent list9 select the '

2. Right-clic5 and FSearch 3isplay Re/ote nventoryG U'(L-(V#U'identi6ierV








'port the 6ile

4y de6ault9 the 6ile is saved in the +C. t>s at user disposal.

UdriveV<Wt/pWrunti/e3irWUserver -+ addressVWU+C>s userVWU'(LinstanceVWdisplayR-Wscript




Section ! * (odule ) * +age ?!



'ercise

Select a ' and as5 6or a glo7al re/ote inventory.

Save the 6ile

Ti/e allo=ed< ) /inutes




Section ! * (odule ) * +age ??



?.2 Re/ote nventory as a list in the (S-% 6or one or /ore 's




Section ! * (odule ) * +age ?)




o= to retrieve

1. :ro/ the 'list9 select oneor /oresupervised 's9

and FActions

%lo7al Re/otenventoryG

2. Clic5 on F%lo7alRe/ote nventoryG

!. Iait 6or the F%R StatusG eNual to FCo/pletedG

?. FApplyG




Section ! * (odule ) * +age ?




Result as a list in (S-%




Section ! * (odule ) * +age ?"




'port Re/ote nventory data to the local +C

1. Select the ro=s to7e eported

2. Clic5 on the F'portdataG icon

!. Save the CS$ 6ile







) Resetting an ' 6ro/ 'Nuip/ent $ie=




Section ! * (odule ) * +age ?&


3 ·5 ·4/CO+R%T ©A LCAT'L-LC'T 2012. ALL R%TS R'S'R$'3.


'a/ple 6or 10 S( R?.

An ' reset /ay 7e necessary in certain 6ailure situations.

This operation resets9 shuts do=n and restarts all the processes currentlyrunning on the '.

Tra66ic is una66ected.

The co//unication 7et=een the ' and the OS is lost 6or a 6e= /inutes.

Clic5 on FRestart 'G








'a/ple 6or 18)0 TSS-!20 R?.0

1. Select the 'Nuip/entController 7oard

2. n the FRestartG 7o9 select FCo//and (ode K :RC3G and then FSaveG

:or other 5inds o6 eNuip/ent9 the co//ands and associated /enus to 7e selected into the eNuip/ent

vie= are speci6ic 6or each single ' type9 so please re6er to the relevant Operator and7oo5s or Student%uides.








'a/ple 6or 18!0 +SS-!2 R!.

1. Select the Active 'CD'Nuip/ent Controller 7oardE

!. Select FIar/ Re7ootG or FCold Re7ootG

2. Select the FRe7ootG 6older

?. FSu7/itG

:or other 5inds o6 eNuip/ent9 the co//ands and associated /enus to 7e selected into the eNuip/ent

vie= are speci6ic 6or each single ' type9 so please re6er to the relevant Operator and7oo5s or Student%uides.







'nd o6 /odule' (anage/ent



Copyright © 2012 Alcatel-Lucent. All Rights Reserved.TOS!01"#$!.1-S%-R&.-'d1 (odule !. 'dition 1

Section ! ) (odule ) *age 1

++S'C



(odule ! ' si/ulator and ' (, acup and restore

TOS!01"#$!.1-S%-R&.-'d1 (odule !. 'dition 1


1!30 O(S '(L







1!30 O(S '(L ) R&. Operation and (aintenanceSyste/ Operation ) ! ' si/ulator and ' (, acup and restore

3 · 6 · 2CO*4R,%5T © ALCAT'L-L6C'T 2012. ALL R,%5TS R'S'R$'7.

lan page

This page is le8t lan intentionally

7ocu/ent 5istory

'dition 7ate Author Re/ars





Section ! ) (odule ) *age !



(odule o<ectives

6pon co/pletion o8 this /odule: you should e ale to=

*er8or/ the ' (, acup>restore either y (S-%6, or '?uip/ent $ie@

Operate the si/ulator 8or ! et@or 'le/ents




Section ! ) (odule ) *age



(odule o<ectives Bcont.








Tale o8 contents

S@itch to notes vie@D *age

1 Principles & FTS "4G TL1 equipment and 1678!! "#4$3 and later% &1.1 ESingle clic (, acupF co//and 131.2 E(ultiple ' (, acupF co//and 201.! Go and Session /anage/ent= acup 231. Go and Session /anage/ent= Restore !1.3 'Ha/ples o8 (, acup>restore 8ro/ '?uip/ent $ie@ 0183PSS' (ac)up 4183PSS' #est*re 434G TL1 equipment and 1678!! "#4$3 and later%' Pr*cedure 4"185TSS+32 ,ac)up' !urrent -ata,ase . (ac)up -ata,ase 49185TSS+32 ,ac)up' (ac)up -ata,ase . FTP ser/er 4&2 03 simulat*r 52







Tale o8 contents Bcont.

S@itch to notes vie@D





Section ! ) (odule ) *age "



1 *rinciples I ;TS







1 *rinciples I ;TS

!: S(*: % ! e?uip/ent

active(,

'

/odi8ication

1!30O(S-'(L

restore

8ile

acup

ot

active(,activate

The ' /odi8ications carried out y /eans o8 the OS Jor 1!20CTK are per8or/ed directly on the ' (,.

,n case o8 !: S(* or % ! 's: the acup procedure copies the ' (, into a 8ile in the OS: @hichlocation into the server is=

>usr>Syste/>'(L#,stanceM >s@dl>s@dlserv>data>'(L,(#,stance#-u/1erM >N#4M

here N is the E' identi8ierF para/eter Jit can e retrieved y the E*ropertiesF o8 the'K: @hile 4 identi8ies di88erent acups 8or the sa/e '.

,n case o8 19!0*SS ': the acup dataase can e saved and retrieved to>8ro/ a T;T* Jor S;T*K location:@hich nor/ally resides on the 1!30O(S server and that is presented y de8ault as=

>usr>Syste/>'(L#,stanceM >s@dl>s@dlserv>data>'(L,(#,stance#-u/1erM >6NM

here N is the E' identi8ierF para/eter. ,t can e retrieved y the E*ropertiesF o8 the '.The user can ho@ever choose a location other than the one proposed y the syste/.




Section ! ) (odule ) *age &


3 · 6 · CO*4R,%5T © ALCAT'L-L6C'T 2012. ALL R,%5TS R'S'R$'7.

1 *rinciples I ;TS

% TL1 e?uip/ent and 1"9(CC JR.! and laterK

Current7ataase

/odi8ication

'(L

CopyRe/ote;ile 8ro/;T* serverto '

8ile

acup

acup7ataaserestore

CopyRe/ote

;ile 8ro/' to ;T*

server

'

The ' /odi8ications carried out y /eans o8 OS Jor 1!20CTK are per8or/ed directly on the ' current

dataase Jcalled E*ri/ary acup 7ataaseF in TSS-!20: or ERunning 7ataaseF in TSS-100K.

The acup copies the Current 7ataase into the acup 7ataase in the ' Jcalled ESecondary acup7ataaseF in TSS-!20: or Eacup 7ataaseF in TSS-100K.

The acup 7ataase can e saved>retrieved to>8ro/ an ;T* location: @hich nor/ally resides on the1!30O(S server J@hich is nor/ally presented y de8aultK. The user can ho@ever choose a location otherthan the one proposed y the syste/ Jsee neHt slidesK.

Re8 to the restore procedure: once the acup 8iles have een copied 8ro/ the ;T* server to the acup7ataase: it /ust e activated to the Current 7ataase JrestoreK.







1 *rinciples I ;TS

Si/ulator

SS

-(-(et*r)Psical#es*urces

et*r)Psical#es*urces

simulat*r

simulat*r

-(-(

S

P#+9

S+9

135 :S S-;-(-(

-(-(

S T 8 # T 2

-

SS

03 L+9

s 9-s







1 *rinciples I ;TS

Si/ulator Bcont.

or on an ' or on the ' si/ulator: ut never on oth

The ' si/ulator is used in case o8= 7C 8ailure=

the ' si/ulator is the only @ay 8or the 1!30O(S-'(L operator to loo up the 'Pscon8iguration Jthe con8iguration stored at the ti/e o8 the last align/entK.

o88-line con8iguration

restoration o8 the ' (,

The si/ulator can e started only i8 the ' is in the EOS isolationF state

The si/ulator is only availale 8or so/e releases o8 ! 's.

The ' si/ulator is the ' so8t@are @hich runs on the 1!30 O(S '(L.

The availaility o8 the ' si/ulator depends on the type "*nl 03% and version o8 the '.

The ' si/ulator is started up Jand stoppedK /anually y the 1!30O (S '(L operator.

The syste/ never auto/atically starts or stops the ' si/ulator.







1 *rinciples I ;TS

Si/ulator Bcont.

Si/ulator

Align do@n

active(,

!' not

active(,activate

1!30 O(S '(L

Si/ulator

Si/ulator

Align up

si/ulator(,

y de8ault: the Si/ulator can e started only once at a ti/e on a given1!30 O(S syste/ instance

;ro/ ' e?uip/ent vie@=

Align up= /enu Supervision Si/ulator Align up

Align do@n= /enu Supervision Si/ulator Align do@n

Activate= /enu Supervision Si/ulator Activate




Section ! ) (odule ) *age 1!



1 *rinciples I ;TS

Go and Session

Go

Type

' (, acup ' (, Restore

' So8t@are *acage 7o@nload

Activation ,//ediate

7e8erred

Ti/etale

the acup>Restore>S@7@ iseHecuted at the sa/e ti/e 8or the

's o8 a session Sessions= one at a ti/e

e.g. Session 2 is eHecuted @hen Session 1is over

Go 1

Session 1'1

'2

'!

Session 2

'

'3

;ile Trans8er Scheduler J;TSK

Go 2

Session 1

'

'"

'9

;ile Trans8er Scheduler launches: 8or each session: the /aHi/u/ nu/er o8 si/ultaneous 8ile trans8er

allo@ed JQ10 8or each involved LA= then the /aHi/u/ si/ultaneous 8ile trans8er: inside a session: is 10/ultiply y the nu/er o8 involved LAK.

The /aHi/u/ ' nu/er 8or any session is &0 ut there is no li/it regarding the /aHi/u/ sessionnu/er in a <o.







1 *rinciples I ;TS

acup and Restore 8ro/ ;TS

ESingle clic (, acupF co//and in ' list 8or only one '

a Go and its Session are created auto/atically activation ti/e= the Go is activated as soon as the ESingle clic (, acupF co//and is

issued

E(ultiple ' (, acupF co//and in ' list 8or one or /ore 's

a Go and its Session are created y the user in one shot

activation ti/e i//ediate= the Go is activated as soon as it is created

de8erred= the user can set an activation date>ti/e

Go and Session /anage/ent 8or one or /ore 's

Gos and Sessions are created y the user= 8irst the Go: then its Session>s.

activation ti/e i//ediate= the <o /ust e activated y the user

de8erred= the user can set an activation date>ti/e

acup only

acup only

acup and Restore







1.1 ESingle clic (, acupF co//and








'Hecution

;ro/ the et@or 'le/entlist: select the desired ':

right clic and <8cti*ns Sin=le clic) 9( (ac)up>

The procedure is the sa/e8or all the 8a/ilies o8 's

This /essage /eans that theacup is started. To checthe outco/e: see neHt slides.

The acup 8iles are put into the 1!30O(S server directory=

>usr>Syste/>'(L#,stanceM >s@dl>s@dlserv>data>'(L,(#,stance#-u/1erM >6NM

here N is the E' identi8ierF para/eter. ,t can e retrieved y the E*ropertiesF o8 the '.

,n case o8 ! 's: the acup over@rites the si/ulator (,.




Section ! ) (odule ) *age 1"




Chec= Gos list

,ssue the <o list y<Searc6 File Trans?erSc6eduler @*,s>

$eri8y the Go status=@ait until it eco/es ESuccess8ulF

' user lael 7ate Local ti/e








Chec= 8ailure analysis

acup Report

'Ha/ple 8or 1930TSS-!20

,8 you get such a /essage:open the e?uip/ent vie@ Syste/ (anage/ent ,nitialie and 6pgrade ,n-Service 6pgrade

Re/ove Old 6pgrade

Success8ulacup

;ailedacup




Section ! ) (odule ) *age 1&


3 · 6 ·1CO*4R,%5T © ALCAT'L-L6C'T 2012. ALL R,%5TS R'S'R$'7.

'Hercise

Select a ' and per8or/ a single clic acup on the training plat8or/.

Ti/e allo@ed= 3 /inutes







1.2 E(ultiple ' (, acupF co//and








'Hecution

1. Select one or /ore

's

Actions

(ultiple ' (,acup

2. 'dit theGoa/e








'Hecution Bcont.

!. Choose

. ;or E7e8erredF

3. Apply

,//ediate= the acup is eHecuted upon Apply

7e8erred= the acup is eHecuted at the ti/e chosen y the user








'Hecution Bcont.

,//ediate

7e8erred

ait 8orStatus Q Success8ul







'Hercise

Select 8e@ 's and per8or/ a /ultiple acup on the training plat8or/.








1.! Go and Session /anage/ent=acup







1.! Go and Session /anage/ent= acup

*rocedure

1. Select <8cti*ns File Trans?er Sc6eduler !reate @*,>

2. Assign a na/e to the ne@ <o: @hose ETypeF /ust e E(, acupF

!. Set the <o periodicity Ji//ediate: de8erredK= 8or scheduled acup:select <-e?erred>

. Set the periodicity

3. ,ssue the Go list y <Searc6 File Trans?er Sc6eduler @*,s>

. Right clic on the ne@ <o and issue <8cti*ns !reate (ac)upSessi*n>

". ,n the Eacup Session CreationF @indo@: choose the desired ' 8oracup

9. Right clic on the ne@ <o and issue <8cti*ns 8cti/ate @*,>








Step 1 and 2= <o creation and <o type

1. Select <8cti*ns File Trans?erSc6eduler

!reate @*,>

2. Assign a na/e tothe ne@ <o. Selecttype <9( (ac)up>








Step ! and = ti/e scheduling

1. The user canspeci8y a duration

in hours: a8ter@hich the <o @ille auto/aticallystopped

Availale 8or E7e8erredF




Section ! ) (odule ) *age 2&




Step 3 and = <o list and session creation

1. ,ssue the Golist y <Searc6 FileTrans?er

Sc6eduler @*,s>

2. Right clic on thene@ <o and<8cti*ns

!reate (ac)upSessi*n>




Section ! ) (odule ) *age !0


3 ·6 ·3CO*4R,%5T ©A LCAT'L-L6C'T 2012. ALL R,%5TS R'S'R$'7.


Step "= 'JsK selection

1. Choose the'JsK

2. Apply








Step 9= <o activation

1. Right clic on the ne@ <o and<8cti*ns 8cti/ate @*,>

The Go is E@aitingF its Activation Ti/e

The Go has eensuccess8ully co/pleted








Other actions on acup <os

A acup <o can e= 'dited Ji8 not pendingK to /odi8y its periodicity Ji//ediate or de8erred periodicK

Aorted Ji8 aitingK

7eleted Ji8 not pendingK

(ultiple sessions can e created in a single <o= choose <!reate (ac)upSessi*ns>

acup sessions can e retrieved y <Searc6 (ac)up Sessi*ns>

The status o8 an activated acup <o can e retrieved y <Searc6 @*,Status>

EActionF • is not availale i8 the <o is Running• is availale i8 the <o is aiting




Section ! ) (odule ) *age !!



'Hercise

1.6sing the scheduler: create a acup session: details should e given ythe instructor.

2. Chec that the acup is done.








1. Go and Session /anage/ent=Restore







1. Go and Session /anage/ent= Restore

Restore *rocedure

1. Select <8cti*ns File Trans?er Sc6eduler !reate @*,>

2. Assign a na/e to the ne@ <o: @hich ETypeF /ust e E(, RestoreF

!. ,ssue the Go list y <Searc6 File Trans?er Sc6eduler @*,s>

. Right clic on the ne@ <o and issue <8cti*ns !reate #est*reSessi*n>

3. ,n the ERestore Session CreationF @indo@: choose the desired ' andthe acup 8ile to restore

. Right clic on the ne@ <o and issue <8cti*ns 8cti/ate @*,>








Step 1 and 2= <o creation and <o type

1. Select <8cti*ns FileTrans?er Sc6eduler !reate @*,>

2. Assign a na/e tothe ne@ <o. Selecttype <9(#est*re>

,//ediate only




Section ! ) (odule ) *age !"




Step ! and = <o list and session creation

1. ,ssue the Golist y <Searc6

FileTrans?erSc6eduler

@*,s>

2. Right clic on thene@ <o and

<8cti*ns

!reate #est*reSessi*n>








Step 3= session con8iguration

1. Select the '

!. Select theacup 8ile

. 5ighlight

3. Apply

To assign a second': repeat the steps8ro/ 3a through 3c

2. Select E4esF toauto/aticallyactivate therestored (,: EoF other@ise JUK

(, Active ;lag

•(eaning• o J;alseK= a8ter the restore procedure has een co/pleted: the operator /ust activate the ne@

(, 8ro/ '?uip/ent $ie@ as descried later on in this /odule.

• 4es JTrueK= the restored (, is auto/atically activated at the end o8 the restore.

•'88ectiveness Jat the ti/e the Student %uide @as developedK

• 8or 19!0*SS: a8ter the acup 8ile has een restored on the ': an auto/atic restart @ill occur inany case: leading to the ne@ (, activation.

• 8or O(S Je.g. 10S(K: E(, Active ;lagF is disregarded= the restored (, is never activatedauto/atically. The operator has to activate.

• 8or 1930TSS-100 R!.1 and 1930TSS-!20 R.0: E(, Active ;lagF is operational.




Section ! ) (odule ) *age !&




Step = <o activation

1. Right clic on the ne@ <o and <8cti*ns

8cti/ate @*,> ait until the Go haseen success8ullyco/pleted







1.3 'Ha/ples o8 (, acup>restore8ro/ '?uip/ent $ie@







1.3 'Ha/ples o8 (, acup>restore 8ro/ '?uip/ent $ie@

!: S(*: % ! e?uip/ent= acup

S(* 's=The co//ands and associated /enus arespeci8ic 8or each single 's. So: please re8erto the Operator 5andoos and to theTraining (anuals o8 each single ' type.

1.Select <-*5nl*ad

i, mana=ement>

!. Clic on <(ac)up>

2. 'nter a na/e

,n case o8 !: S(* or % ! 's: the acup procedure copies the ' (, into a 8ile in the OS: @hich

location into the server is= >usr>Syste/>'(L#,stanceM >s@dl>s@dlserv>data>'(L,(#,stance#-u/1erM >N#4M

here N is the E' identi8ierF para/eter Jit can e retrieved y the E*ropertiesF o8 the'K: @hile 4 identi8ies di88erent acups 8or the sa/e '.








!: S(*: % ! e?uip/ent= Restore

2. Clic on <#est*re>

@ait 8or the /essage<#est*redc*mpleted>

1. Select theacup to erestored JUK

!. Clic on<8cti/ate>

acups created y /eans o8 ;TS J;ile Trans8er SchedulerK

8ts#4444((77hh//H

The 1!30O(S proposes 8or the restore only the (,s that @ere aced-up 8ro/ this speci8ic '.







1 ' (, acup>restore

otes aout ! 's V e.g. 10S(

Three /ethods 8or /anaging acup>restore=

;ile Trans8er Scheduler J8ro/ (S-%6,K

Si/ulator J8ro/ '?uip/ent $ie@K (i /anage/ent J8ro/ '?uip/ent $ie@K

;TS and Si/ulator=

1!30O(S-'(L eeps only one acup 8ile: that is the last one The acup per8or/ed y /eans o8 Si/ulator over@rites the one per8or/ed 8ro/

;TS: and vice versa

The acup 8ile can e restored y /eans o8 Si/ulator or ;TS

;TS can restore the acups created y /eans o8 E(i /anage/entF: too

(i /anage/ent=

every acup creates a ne@ acup 8ile in 1!30O(S-'(L

E(i /anage/entF can restore only the acups created y /eans o8 E(i/anage/entF








19!0*SS= acup

;ro/ the ESho@ '?uip/entF vie@: issue

<8dministrati*n -ata,ase (ac)up and #est*re>

Choose the S;T* protocol

*rovide the root6ser,7 and *ass@ord

The de8ault location in the1!30O(S server isproposed y the syste/

Clic <8ppl7> and then <(ac)up>

ait 8or the procedure results

The 6RL asolute path is=

>usr>Syste/>'(L# instanceM >s@dl>s@dlserv>data>'(L,(#,nstanceM> 6-'#,nternal#,7M

The acup per8or/ed y /eans o8 '?uip/ent $ie@ over@rites the one per8or/ed y /eans o8 ;ileTrans8er Scheduler: and vice versa.








19!0*SS= Restore

;ro/ the ESho@ '?uip/entF vie@: issue


Choose the T;T* or the

S;T* protocol

,8 S;T* is chosen: provide the6ser,7 and *ass@ord o8 the1!30O(SWs server

The de8ault location in the1!30O(S server is proposed ythe syste/. Change the 8ilena/eto e restored i8 desired.

Clic <8ppl7> and then <#est*re>

The user is logged out and the syste/ is @ar/ restarted. A8ter thereoot: chec the restore procedure results in this @indo@.


>usr>Syste/>'(L# instanceM >s@dl>s@dlserv>data>'(L,(#,nstanceM> 6-'#,nternal#,7M








19!0*SS= Restore Bcont.

A8ter the reoot: chec the results o8 the restore operation.





Section ! ) (odule ) *age "




% TL1 e?uip/ent and 1"9(CC JR.! and laterK= *rocedure

acup

1. ac-up the current dataase on the acup dataase

2. Copy the acup dataase on an eHternal archive y using the Re/ote 8ilecopy 8ro/ ' to ;T* server 8eature

Restore

1. Copy the acup 8iles previously saved on an eHternal archive y using theRe/ote 8ile copy 8ro/ ;T* server to ' 8eature

2. Activate the acup dataase

,n the 8ollo@ing: an eHa/ple ased on a 1930TSS-!20 R.0 is [email protected] that the co//ands and associated /enus to e selected into

the e?uip/ent vie@ are ' speci8ic: so please re8er to the Operator5andoos and to the Training (anuals o8 each single ' type.







1. ;ro/ the ESho@ '?uip/entF vie@: issue

<S7stem ana=ement -( ana=ement -ata,ase Per?*rm

-( (ac)up> and con8ir/ the choice clicing on <Aes> ait 8or the con8ir/ noti8ication


1930TSS-!20 acup= Current 7ataase acup 7ataase

This /essage co/esup i//ediately

This /essage co/esup a8ter so/e ti/e




Section ! ) (odule ) *age &




1930TSS-!20 acup= acup 7ataase ;T* server


<S7stem ana=ement -( ana=ement #em*te File Per?*rm!*p7 Fr*m 12 t* FTP>

ait 8or the co/pletion noti8ication

Clic <8ppl7> and thencon8ir/ @ith <Aes>

The syste/ auto/aticallyinserts the needed ;T*user and pass@ord

The syste/ proposes the1!30O(S server as hostlocation.*ort /ust e 21.


>usr>Syste/>'(L# instanceM >s@dl>s@dlserv>data>'(L,(#,nstance M>6-'#,nternal#,7M








Restore eHa/ple @ith 1930TSS-!20 R!.1


<S7stem ana=ement -( ana=ement #em*te File Per?*rm!*p7 Fr*m FTP t* 12>

ait 8or the co/pletion noti8ication

The syste/auto/aticallyinserts the neededLocation

The Co//and (odecan e Eor/alF or

E;orcedF JUK

Clic <8ppl7> and then con8ir/ @ith <Aes>


>usr>Syste/>'(L# instanceM >s@dl>s@dlserv>data>'(L,(#,nstanceM>-'#,nternal#,7M

JUK ,8 E;orcedF: the operation is per8or/ed regardless o8 /is/atch on S,7: S version type: etc.








Restore eHa/ple @ith 1930TSS-!20 R!.1 Bcont.


<S7stem ana=ement -(

ana=ement -ata,ase #est*re-(>

'ventually choose E8orcedF Jnotreco//endedK and then <8ppl7> ,8 E;orcedF: the operation is per8or/ed

regardless o8 /is/atch on S,7: S versiontype: etc.

ait 8or the con8ir/ noti8ication

The ' @ill then auto/atically restart

$($',8 EoF @as chosen during the restore procedure suse?uentto a ESingle clic (, acupF: this is the ERestore 7F procedurethe operator /ust eHecute a8ter the restore <o co/pletion







2 ! ' si/ulator







2 ! ' si/ulator

Loading the si/ulator @ith a con8iguration

;RO( '6,*('T $,';RO( '6,*('T $,'

Copy the con8iguration o8

the real ' into thesi/ulator <Super/isi*n

Simulat*r 8li=n up>







2 ! ' si/ulator

O88-line con8iguration

1. Start supervision2. 6pload the ' con8iguration into the si/ulator Jalign upK

!. Stop the supervision o8 ' Jnote 1K

;OR A OT S6*'R$,S'7 '6,*('T=

. Start the si/ulator= Super/isi*n Simulat*r Start 3. (odi8y the con8iguration Jnote 2= 1!30O(S-S75 can do itK. Stop the si/ulator= Super/isi*n Simulat*r St*p ". Start supervision Jchanges done in the si/ulator donPt appearK9. Align the si/ulatorPs (, do@n to the '

Super/isi*n Simulat*r 8li=n d*5n &. Activate the ne@ con8iguration Super/isi*n Simulat*r 8cti/ate @ait 8or co//unication to e re-estalished 8ollo@ing EOS isolationF

note 1=

Caution= stopping the e?uip/ent supervision in order to use the si/ulator: the EOSisolationF state @ill occur a8ter a 8e@ /inutes.

note 2=

The 1!30O(S-S75 can update the si/ulator. This 8eature is used 8or the e?uip/entcontroller card replace/ent procedure Ji.e. in O(SK.







2 ! ' si/ulator

O88-line ro@sing

;OR A S6*'R$,S'7 '6,*('T in OS ,SOLAT,O state=

1. Start the si/ulator= Super/isi*n Simulat*r Start

2. 7isplay the con8iguration last no@n con8iguration

last ' alar/ state

!. Stop the si/ulator= Super/isi*n Simulat*r St*p







'nd o8 /odule! ' si/ulator and ' (, acup and restore



Copyright © 2012 Alcatel-Lucent. All Rights Reserved.TOS!01"#$!.1-S%-R&.-'d1 (odule ).1 'dition 1

Section ) * (odule 1 * +age 1

,,S'C



(odule 1 Alar/ /anage/ent

TOS!01"#$!.1-S%-R&.-'d1 (odule ).1 'dition 1

Section )(aintenance Applications

1!0 O(S '(L







1!0 O(S '(L * R&. Operation and (aintenance(aintenance Applications * Alar/ /anage/ent

4 · 1 · 2CO+R%T © ALCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.

5lan6 page


4ocu/ent istory






Section ) * (odule 1 * +age !



(odule o8<ectives

3pon co/pletion o7 this /odule: you should 8e a8le to=

handle the Alar/ Surveillance application 7or current and historical alar/s




Section ) * (odule 1 * +age )



(odule o8<ectives >cont.?





Section ) * (odule 1 * +age



Ta8le o7 contents

S@itch to notes vie@ +age

1 Displaying current alarms "2 Alarm debouncing 203 Creating, modifying and deleting an alarm sublist 294 Performing actions on current alarms 3"5 Handling te Alarm !ur"eillance facilities 4!# Displaying te alarm istory 50$ Administrating te A! 5&






4 · 1 · %CO+R%T ©A LCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.


AS principles

Current

alar/s

istorical

alar/s

Alarm !ur"eillance

&et'or(

resources

Raise and clear alar/s

Archive

alar/s

4isplay alar/s (anage alar/s 4isplay alar/s

Real Ti/e(anage/ent

Static analysis

The Alar/ Surveillance 7unction 7or the '(L is supported 8y the Converged ;ault (anage/ent

co/ponent o7 the 1!0O(S.The AS is designed to receive: store and display in real ti/e the alar/s generated 8y di77erent sourcesBC3RR'T ALAR(S.

The AS provides the option o7 archiving and retrieving alar/s BSTORCAL ALAR(S.

Current alar/s

DliveE alar/s Bper/anently re7reshed

istorical alar/s

auto-purging

DliveE alar/s that are auto/atically re/oved 7ro/ the Current Alar/s list as soon as they rise

8ecause the operator has set such a 7ilter criteria

/anual purging

alar/s that are /anually re/oved 7ro/ the Current Alar/s list 8y the operator

over7lo@

alar/s re/oved 7ro/ the Current Alar/s list 8ecause it is 7ull B/aF 10:000 alar/s

Dac6no@ledged A4 clearedE alar/s

synchroniGation




Section ) * (odule 1 * +age &


4 · 1 · )CO+R%T ©A LCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.


The availa8le %3s 7or alar/ /anage/ent

He8 +ortal Operation Alar/s

S4+ITH4(

'(L

%lo8al= '(L J H4( J +IT J S4 J Current 'ventsLog

The D*lobal Alarm+ provides a %3 7or the /anage/ent o7 the alar/s related to all the applications

installed on the server Be.g. '(L: S4: +IT.;ro/ the %lo8al Alar/ (anage/ent the user can eFploit the sa/e 7eature descri8ed in the 7ollo@ing 7orthe '(L Alar/ (anage/ent co/ponent.

All the ;ault (anage/ent %3s provide the user @ith the sa/e loo6 and 7eel.

1!0O(S supports a single co//on 7ault /anage/ent %3 @hich provides presentation 7unctions 7or all/anaged net@or6 ele/ents.

The ;ault (anage/ent %3=

+resents a dyna/ic vie@ o7 all current alar/s in the /anaged net@or6 and also all historical alar/s

Supports actions on alar/s Allo@s to search: sort and 7ilter the alar/ lists

Allo@s custo/iGed alar/ list con7igurations in ter/s o7 attri8utes displayed and ordering o7 attri8utes

Supports the saving o7 /ultiple user de7ined alar/ su8-list con7igurations

The operator can select an alar/ and conteFtually navigates to per/itted operations screens Bi.e.the eKuip/ent vie@ 7or the selected entity. The /enu ite/s presented to the user are conteFtual tothe entity selected and to the user pro7ile.








The availa8le %3s 7or alar/ /anage/ent >cont.?

4e7ault su8lists

S4 +IT H4('(L

%lo8al








avigating 7ro/ 'Kuip/ent $ie@ to Alar/ Surveillance

-Diagnosis Alarms &. /or

.0uipment, ransmission,

.2ternal Points3 Alarms4 to openthe related Alar/ (anage/ent %3

! and )% ! 's









1. Select the node2. Clic6 on -&. /or .0uipment,

ransmission, !yncroniation,.2ternal Points3 Alarms to openthe related Alar/ (anage/ent %3

190TSS-!20M10




Section ) * (odule 1 * +age 1!





Clic6 on -Alarms+ to

display all the ' alar/s

Or: clic6 on the -6ault+ 8utton: then select the Alar/ Category and clic6-!ubmit+

19!0+SS

;or other 6inds o7 )% TL1 's: please re7er to the speci7ic eKuip/ent docu/entation.




Section ) * (odule 1 * +age 1)


4 ·1 ·14CO+R%T ©A LCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.


'(L Current Alar/ (anage/ent /ain @indo@

Su8lists

(essagearea

Su8listNsalar/s








4isplay pre7erences

5y selectingMdeselecting the speci7ic option itNs possi8le to sho@Mhide therelated area.

e.g. onlythe alar/su8list issho@n

Operator can change %3 visualiGation also 8y using the icons on the Tool8ar=






4 ·1 ·1#CO+R%T ©A LCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.


+aginate su8list

tNs possi8le to sho@Mhide paginate su8list and: in case o7 paginate: tode7ine the nu/8er o7 ro@s per page B/aF 200.




Section ) * (odule 1 * +age 1"


4 ·1 ·1$CO+R%T ©A LCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.


;reeGe data

1. 4o -6reee data+

2. The counters in the su8listsu//ary area are updated 8y the

ne@ alar/s: @hile P

!. P the su8listcontent area is not.






4 ·1 ·1%CO+R%T ©A LCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.


4isplaying /ore in7or/ation

Select an alar/ in the su8list

-Alarm 7ore 8nfo+ or

Double clic( te alarm

4i77erent detailscan 8edisplayed

;urther actions are possi8le 7ro/ D(ore Alar/ n7or/ation Hindo@E=

•+rint or 'Fport the Alar/ n7or/ation•avigate to ...

• the related '(L-3S(

• the ' Creation %3: in case o7 D' autodiscoveryE @arning alar/




Section ) * (odule 1 * +age 1&


4 ·1 ·1)CO+R%T ©A LCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.


(onitoring ne@ alar/s

AS %3 can 8e 6ept /ini/iGed. t @ill 8e auto/atically raised up 8y ne@ alar/s.1.Chec6 the option in the /enu 9ie' Auto:;aise

2.(ini/iGe the @indo@







2 Alar/ de8ouncing







ResourceName

Probableause

Event!ime

lear!ime

Repetitionounters

"""" YYYY !# !$ %

ResourceName

Probableause

Event!ime

lear!ime

Repetitionounters

"""" YYYY !# !% &

"""" YYYY !' !( &

"""" YYYY !) !$ &

2 Alar/ de8ouncing

+rinciples >cont.?

Alar/ O

Alar/ O;;

Alar/ Raise 'vent Alar/ Clear 'vent

T1 T2 T! T) T T

To 'nd-Custo/ers:T1-T is the 7aultyperiod as a @hole:in @hich theresource is not a8leto support a given7unction

O4e8ouncing

4e8ouncingO

Alar/ de8ouncing consists in holding the Clear events Bno propagation to AS and upper (anagers 7or a

given period: to chec6 @hether a ne@ Raise o7 the sa/e +ro8a8le Cause on the sa/e ' resource isgenerated.

7 the alar/ is raised again: the Clear noti7ication is not propagated to upper /anagers: and the record inthe AS is 6ept @ith Repetition Counter attri8ute increased 8y one.

7 the alar/ is not raised @ithin the hold period: the Clear event is nor/ally propagated. The Clear Ti/e is6ept according to the ' ti/esta/p.

Alar/ de8ouncing reduces the nu/8er o7 records storedMdisplayed in the AS Current Alar/ List and the

related tra77ic to the et@or6 /anagers B1!0O(S-S4: 1!0O(S-+IT: etc.







2 Alar/ de8ouncing

Architecture Overvie@ BeFa/ple 7or ! and S(+ 's

S(L= S4 et@or6 (anage/ent Layer







2 Alar/ de8ouncing

Con7iguration 7or !: )% ! and S(+ eKuip/ent

1. n the (S-%3: issue-Actions .7<

Configure AlarmDebouncing+







2 Alar/ de8ouncing

Con7iguration 7or !: )% ! and S(+ eKuip/ent >cont.?

(aF!00

The ne@ values 8eco/e active inthe syste/ a7ter a /aFi/u/ o7 2/inutes: @ithout the need to restartany process.

The de7ault value is 190s on any+ro8a8le Cause.

2. n case o7 '(L7ederation: select thedesired +((

!a. Type the ne@ old +eriodin seconds 7or the desired+ro8a8le causeBs

!8. Or: set a old period toall the +ro8a8le CausesBclic6 -!et to All+

). -Apply+







2 Alar/ de8ouncing

Alar/ 4e8ouncing case

;aise

1

Clear

2

;aise

1

1 2 3






4 · 1 · 2#CO+R%T © ALCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.

2 Alar/ de8ouncing

Alar/ 4e8ouncing case >cont.?

1 2 34

1 2 345






4 ·1 · 2$CO+R%T © ALCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.

2 Alar/ de8ouncing

Alar/ 4e8ouncing case >cont.?

1 2 345#

1 2 345#

Hold Periodepiration







! Creating: /odi7ying and deleting an alar/ su8list

Create a ne@ su8list

. The sign BQ is put8eside the shared

su8listNs na/e

The ne@ su8list is a copy o7an eFisting su8list. Later on:

it can 8e /odi7ied.

1. Select a su8list to copy

2. Su8list e@

!. 'nter a na/e and OI

). Ans@er

Shared= anyoperator can see it

To delete a su8list: select it and then Su8list 4elete.




Section ) * (odule 1 * +age !0




(odi7y a su8list

To /odi7y an alar/ su8list:

select a su8list and

-!ublist 7odify+








Su8list 4S+LA para/eters

Su8listna/e

Other availa8leattri8utes Bto/ove to the4isplayed

Attri8utes list:select and clic6on the arro@

To hide4o Apply toapply the/odi7ications

Su8list colorBsingle clic6to /odi7y

Currentlydisplayedattri8utes in thesu8list Bselectand clic6 on thearro@ to re/ove7ro/ the list

Todisplay

To change theorder: select anattri8ute and clic6these arro@s








Su8list ;LT'R para/eters

1. Select -8nclude alarmsmatcing te follo'ing4+

2. tNs possi8le to /odi7y a7ilter B'dit or to create ane@ one Be@




Section ) * (odule 1 * +age !!




Su8list ;LT'R para/eters - e@

Chec6 the 8oF and clic6 D;e@erE tore/ove the 7iltering criteria

Re/ove all7iltering criteria

Choose DotE to deny thecriteria

Choose D(oreE to add /ore7iltering criteria




Section ) * (odule 1 * +age !)




Su8list SORT para/eters

To select asaved sort

To re/ove thesort 7ro/ therepository

+ara/eters notused to sort thesu8list Bselect andclic6 on the arro@to use one

Right clic6here to selectthe sortingorderBincre/ent ordecre/ent

+ara/etersused to sortthe su8list

To save yoursort choice







To get the @arning 8lin6


Su8list TR%%'R para/eters

Activate this option to start asound 7ile each ti/e an alar/appears in the su8list

To eFecute a script or a navigationi7 the nu/8er o7 alar/s in thesu8list is greater than a given

value or 7or an inco/ing alar/

To eFecute a script or a navigationi7 the nu/8er o7 alar/s in thesu8list is s/aller than a given valueor 7or an outgoing alar/

5y eFecuting the script you could: 7or eFa/ple: load a particular process as soon as the nu/8er o7 critical

alar/s eFceeds a certain value.






4 · 1 ·3#CO+R%T © ALCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.

'Fercise

1. 7 possi8le: create an eKuip/ent alar/ on a selected '.

2. Create a su8list @ich selects eKuip/ent alar/s 7ro/ the selected '.

!. Chec6 that the alar/ appears.

Ti/e allo@ed= /inutes




Section ) * (odule 1 * +age !"


4 · 1 · 3$CO+R%T © ALCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.

) +er7or/ing actions on current alar/s






4 ·1 ·3%CO+R%T ©A LCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.


Reserving M unreserving an alar/

Reservation ensures that only one operator is responsi8le 7or an alar/.

To reserve=1. select an alar/

2. select -Alarm ;eser"e+

To reserve and assign1. select an alar/

2. select -Alarm ;eser"eand Assign+

!. Speci7y the operator to @ho/the alar/ /ust 8e assigned

To unreserve= select the reserved alar/

select D Alarm

=nreser"e+

4ou8le-clic6 the alar/

The alar/8eco/es

@hite

The reserved alar/ 8eco/es @hite in the list.

An alar/ can 8e reserved only i7 it has not 8een reserved 8e7ore 8y another operator.The operator @ho can unreserve a given alar/ is only the one @ho reserved it.




Section ) * (odule 1 * +age !&




Ac6no@ledging an alar/

5y ac6no@ledging alar/s: you indicatethat they have 8een registered. As

soon as the alar/ 8eco/es cleared:it @ill 8e re/oved 7ro/ the Current AS and added to the istorical AS.

1. Select one or a group o7 alar/s

2. Select -Alarm Ac(no'ledge+ the Ac6no@ledge/ent attri8ute

changes 7ro/ .ACI Bon ACIno@ledged to ACI BACIno@ledged

The alar/8eco/es

grey

The ac6no@ledged alar/ is grayed.

Ac6no@ledging a cleared alar/ is an i/plicit archiving action. So the ac6no@ledge/ent @ill /ove thecleared alar/s into the istorical AS and re/ove the/ 7ro/ the current alar/s list.




Section ) * (odule 1 * +age )0




(anual purge

1. Select one alar/ or a group o7alar/s

2. Select -Alarm 7anualPurge+ +urged alar/s disappear 7ro/ the

Current alar/s list and are /ovedinto the istorical alar/ list: i7 they/atch the archiving 7ilter.








%enerating trou8le tic6ets

Trou8le tic6et collection o7 allin7or/ation a8out one pro8le/

1. Select a single alar/ or a group o7alar/s

2. Select -Alarm roubleic(et+

!. Con7ir/ the indicator -rouble ic(et

Creation 6lag+ in the su8listchange to >.!

This 7eature reKuires the installation o7 a third party so7t@are co/ponent

A trou8le tic6et contains at least the in7or/ation on the pro8le/: 8ut can also include in7or/ation on the

actions per7or/ed to solve the pro8le/.The ;ault (anage/ent co/ponent can 8e custo/iGed to inter7ace @ith the third-party Trou8le-Tic6eting/anage/ent product ARS BAction ReKuest Syste/ - pu8lished 8y Re/edy Corporation.






4 · 1 ·42CO+R%T © ALCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.

'Fercise

Ac6noledge the alar/ previously created

Ti/e allo@ed= 1 /inute




Section ) * (odule 1 * +age )!



andling the Alar/ Surveillance7acilities




Section ) * (odule 1 * +age ))



ou can navigate to an eFternal application o7 your choice

This navigation 7eature has to 8e con7igured during installation

andling the Alar/ Surveillance 7acilities

avigating 7ro/ AS to an eFternal application

2. Select +?indo'+ -.2ternal

Applications ;[email protected]=sm

1. Select analar/

190TSS-100

Createe= 7or 'autodiscovery

7eature

DCreateeE only in case o7 ' autodiscovery @arnings: to create the correspondent '.

DRelated#'/l3s/E to open the eKuip/ent vie@: to the point @hich raised the corresponding alar/.








'Fporting alar/s to a 7ile

ou can eFport to your +C in a.ht/l : .tFt: .CS$ 7ile a selection

o7 alar/s or a nu/8er o7 pagesBi7 paginate is ena8led

To eFport to a 7ile=

1. n the alar/ su8list select atleast one alar/

2. Select -6ile .2port+

5y selecting +ages: the page set /ust 8e speci7ied=

To eFport the pages 1 and != 1!To eFport the pages 7ro/ 1 through != 1-!

3se de7ault= the 7ollo@ing attri8utes are eFported @hatever the displayed attri8utes are=

+erceived Severity

'vent 4ate and Ti/e

;riendly a/e

Alar/ Type

+ro8a8le Cause a/e

CAL Recording Ti/e

(anaged O8<ect Class

(anaged O8<ect nstance

+ro8a8le Cause d

Cleara8le Status

&B n case o7 a .ASC 7ile is chosen 7or the eFport operation: it /ust then 8e properly parsed 8y a@or6sheet application.








'Fporting alar/s to a 7ile >cont.?

CS$ 7or/at

Bthe get a 8etter data vie@: use D4ata TeFt to colu/nE 'FcelNs co//and




Section ) * (odule 1 * +age )"




Copy M +aste

1. Select so/ealar/s and do-Copy+

2. +aste in a teFtprogra/. The copiedalar/s can 8e pastedalso in a @or6sheetapplication.




Section ) * (odule 1 * +age )&


4 · 1 ·4)CO+R%T © ALCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.

'Fercise

1. Save a 7ile @ith the alar/ on your +C.

2. Repair the eKuip/ent.

!. Chec6 that the alar/ is no@ disappeared.








4isplaying the alar/ history








4escription

The istorical Alar/ List BAL contains 7or/er current alar/s that have8een archived through one o7 the 7ollo@ing processes=

Auto-purging (anual purging

Over7lo@

Ac6no@ledged and cleared alar/s

SynchroniGation

Alar/s are archived i7 they /atch the archiving 7ilter

Auto-purging

these alar/s have never 8een inserted in the Current Alar/ List BCAL. As soon as they arise: they aresent to the AL.

(anual purging

an AS operator /anually re/oves the alar/ 7ro/ the CAL.

Over7lo@

(aFi/u/ siGe o7 the CAL has 8een reached and alar/s are re/oved 7ro/ it.

SynchroniGation

Alar/s that are not con7ir/ed on a synchroniGation co//and are auto/atically cleared 8y theapplication. A/ong the/: those @hich @ere previously ac6no@ledged are 7or@arded to the AL.








+rinciple

7ilter

Archiving 7ilter

CAL or auto purge 7ilter

AL

B+u8lic Archive

7ilter

(ainlist

Su8list

3ser 7ile 3ser 7ile3ser 7ile3ser 7ile

Save selection

The AL is stored using a speci7ic ad-hoc 7or/at Bthe +u8lic Archive 7or/at. This

repository receives all the alar/s passing through the Archiving 7ilter. ou can store a set o7 alar/s Bput together 8y selecting 7ro/ the (ain List or any

su8list in a user-de7ined 7ile. ou can then retrieve alar/s 7ro/ this 7ile instead o7 7ro/ the +u8lic Archive: or in con<unction @ith this source.








Starting up

1. Select -67 Historical+

2. Select=

-;etrie"e from public arci"e+ OR

DRetrieve 7ro/ user 7ileE

Retrieve 7ro/ user 7ile= itNs /eaning7ul i7 a user 7ile has 8een previously created.








Retrieve 7ro/ pu8lic archive

tNs possi8le toapply 7ilters onthe retrieval








Retrieved alar/s

The /ain operations on the archived su8lists are per7or/ed in the sa/e@ay as 7or current alar/s.








Create a user 7ile

1. Select one or a group o7 alar/s in a istorical su8list

2. Right clic6 on the selected group and choose -!a"e As+

!. 'nter a 7ile na/e

). Clic6 on -Apply+

The directory in @hich the 7ile @ill 8e stored has already 8een con7igured 8y the ad/inistrator.








Re/ove a user 7ile

1. ;ro/ the istorical Alar/ (anage/ent @indo@= -Arci"e ;emo"e

user file+

2. Select the 7ile to re/ove and /ove it to DSelected 3ser ;ilesE list 8yclic6ing on the arro@

!. Clic6 -Apply+

Tounselect

Toselect






4 ·1 ·#CO+R%T ©A LCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.


Advanced 7eature /echanis/s and alar/ 7lo@

The Current Alar/s List BCALhas a li/ited siGe. The

operator is provided @ithseveral advanced 7eatures 7or/anaging theover7lo@.

The de7ault siGe o7 the CAL is10000 alar/s: that is its/aFi/u/ siGe: too.

CAL AL

'

Auto+urge7ilter

delete

Auto-Ac67ilter

Archive

7ilter

Trou8leTic6et

7ilter

A;!

Alar/

CAL siGe

The operator can assign the percentage 7ill level at @hich a @arning is e/itted. The operator canalso speci7y the 8ehavior o7 the CAL @hen the over7lo@ occurs B@rapMhalt.

n @rap /ode: a purge @ill auto/atically 8egin. The operator speci7ies the siGe o7 the purgeBnu/8er o7 alar/s and the criteria 8y @hich the alar/s are to 8e deleted Bthese alar/s arearchived in the historical list.

Auto/atic purge

According to the 7ilter criteria: so/e inco/ing alar/s /ay 8e i//ediately archived: @ithout going tothe current alar/s list.

Auto/atic ac6no@ledge/ent

According to the 7ilter criteria: the operator /ay decide to ac6no@ledge so/e alar/s auto/atically@hen they enter the CAL.

Auto/atic trou8le tic6et creation

According to the 7iltering criteria: the operator has a @ay o7 auto/atically reKuesting the creation o7trou8le tic6ets in an eFternal ARS application @hen the alar/s appear in the CAL.

Selective archiving /echanis/

According to the 7ilter criteria: the operator can prevent so/e alar/s 7ro/ 8eing archived in thehistorical list. 5y de7ault: the syste/ plans to archive all the alar/s. 7 this 7ilter is changed: thealar/s that are not archived are lost.

SynchroniGation

5ecause the CAL: 7or any reason: /ay 8eco/e out o7 step @ith the net@or6 alar/s situation: theoperator can provo6e a synchroniGation /echanis/ @hich per7or/s a glo8al re7resh o7 the CAL

chec6ing all the resources involved.






4 ·1 ·#1CO+R%T ©A LCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.


Con7iguring the AS

n the AS-%3 @indo@ select

Alarm !ources Administration 87.7<@1@)5








CAL Ad/inistration

uantity o7alar/s in CAL

7 DCAL ;illing +ercentageE DHarning;illing E then ...

HRA+= a Kuantityo7 alar/s eKual to DOver7lo@ +urgeSiGeE areauto/aticallypurged to /a6eroo/ 7or ne@alar/s

ALT= ne@alar/s are7or@arded toAL

n case o7 over7lo@: the relevant alar/ is provided in the AS-%3 and ...

CAL Ad/inistration

To vie@ the siGe o7 the Current Alar/ List: and to custo/iGe the para/eters relating to over7lo@sand vie@ the current alar/ 7ullness rate.

CAL siGe

The operator can assign the percentage 7ill level at @hich a @arning is e/itted. The operator canalso speci7y the 8ehavior o7 the CAL @hen the over7lo@ occurs B@rapMhalt.

n @rap /ode: a purge @ill auto/atically 8egin. The operator speci7ies the siGe o7 the purgeBnu/8er o7 alar/s and the criteria 8y @hich the alar/s are to 8e deleted Bthese alar/s arearchived in the historical list.

The ;ault (anage/ent co/ponent can 8e custo/iGed to inter7ace @ith the third-party Trou8le-Tic6eting/anage/ent product ARS BAction ReKuest Syste/ - pu8lished 8y Re/edy Corporation.








Archiving 7ilter

Choose an option toassign a 7ilteringcriteria 7or archiving

Clic6 on De@E toopen a @indo@ 7or ane@ personal 7ilter

Activate thepersonal 7ilter

Archiving ;ilter= to archive alar/s @hich are re/oved 7ro/ the CAL and should 8e 7or@arded to the AL.








Auto +urge

Choose an option toassign a 7ilteringcriteria 7or purging


Auto +urge= to divert so/e inco/ing alar/s auto/atically to the AL.








Auto Ac6no@ledge

Choose an option toassign a 7ilteringcriteria 7or

ac6no@ledging


Auto ACI= to ac6no@ledge auto/atically the inco/ing alar/s.






4 ·1 ·##CO+R%T ©A LCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.


Aging

5y Aging the operator can set an

action to 8e done 8y the syste/:7or those alar/s that are in aspeci7ied status since acon7igura8le ti/e

4e7ine the statusand the ti/e o7aging

4e7ine the action to 8edone @hen Daging ti/eE has eFpired

;ilter= to de7ine thealar/s 7or @hich

Aging applies






4 ·1 ·#$CO+R%T ©A LCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.


Aging >cont.?

A7ter the creationo7 an Aging 7ilter:it /ust 8eactivated

Clic6 -Apply+ to

co/plete theprocedure






4 ·1 ·#%CO+R%T ©A LCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.


Trigger

4e7ine the action to8e eFecuted: or anavigation: on eachinco/ing alar/

4e7ine the action to8e eFecuted: or a

navigation: on eachoutgoing alar/

nco/ing alar/= ne@ alar/

Outgoing alar/= cleared alar/

5y ena8ling Trigger on nco/ing or Outgoing alar/s the operator can assign an action BeFecute a script:

navigate to ' %3: send an e-(ailMS(S 7or each inco/ing or outgoing alar/. DSend (ailMS(SE option needs a (ailMS(S service to 8e con7igured and activated on the 1!0O(Sserver. As6 the syste/ ad/inistrator.




Section ) * (odule 1 * +age "0


4 ·1 ·$CO+R%T ©A LCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.


Severity Change >cont.?

A7ter the creation: theseverity change rule/ust 8e activated

;inally: clic6-Apply+




Section ) * (odule 1 * +age "1


4 · 1 ·$1CO+R%T © ALCAT'L-L3C'T 2012. ALL R%TS R'S'R$'4.

'nd o7 /odule Alar/ /anage/ent





,,S'C



(odule 2+er/orance (onitoring anageent

TOS!01"#$!.1-S%-R&.-'d1 (odule ).2 'dition 1


1!0 O(S '(L







1!0 O(S '(L * R&. Operation and (aintenance(aintenance Applications * +er/orance (onitoring anageent

4 · 2 · 2CO+R%3T © ALCAT'L-L4C'T 2012. ALL R%3TS R'S'R$'5.

6lan7 page

This page is le/t 8lan7 intentionally

5ocuent 3istory









(odule o8<ectives

4pon copletion o/ this odule: you should 8e a8le to=

'>plain the eaning o/ the counters

Activate the error easureent on the desired points

Retrieve and analy?e the results







(odule o8<ectives @cont.








Ta8le o/ contents

SBitch to notes vieBC +age

1 Definition of counters "2 Configuring performance points 23 Displaying performance data 3"4 Performance reports 42







Ta8le o/ contents @cont.

SBitch to notes vieBC








1 5e/inition o/ counters






4 · 2 · 8CO+R%3T ©A LCAT'L-L4C'T 2012. ALL R%3TS R'S'R$'5.


ntroduction to S53 per/orance onitoring

Tie

6+

D1D2D!

6+

+rinciples= 6ased on 6+ E6it nterleaved +arityF 8ytes=

6yte 61= 6+9 ERSO3F 6yte 62= 6+2) E(SO3 o/ an ST(1 /raeF

6yte 6!= 6+9 E$C) +O3F

6yte $= 6+2 E$C12 +O3F

1. Coputation o/ the 6+s Eon /rae transissionF






4 · 2 · 9CO+R%3T ©A LCAT'L-L4C'T 2012. ALL R%3TS R'S'R$'5.


ntroduction to S53 per/orance onitoring @cont.

Tie

D1D2D!

6+ coputation'>traction

CO(+AR'

CR'('TCO4T'RS

≠≠≠≠

2. Coparison o/ 6+s Eon /rae receptionF






4 ·2 ·1CO+R%3T ©A LCAT'L-L4C'T 2012. ALL R%3TS R'S'R$'5.



;ar 'nd Eode AF

ST(-

ST(-

ear 'nd Eode 6F $C1

2

$C12

$C

)

$C)

(SO

3

(SO3

R SO

3

R SO3

$C1

2

$C12

$C

)

$C)

(SO

3

(SO3

R SO

3

R SO3

(S-R'

6yte 62

6yte (1 E62 returnF

+-R'

6yte 6!

6yte %1 E6! returnF

6yte $

6yte $ +-R'

TG

TG

RG

RG

6yte 61

On ode A

the near-end in/oration re/lects the per/orance o/ the one-Bay section or path /ro 6 to A the /ar-end in/oration re/lects the per/orance o/ the one-Bay section or path /ro A to 6

On ode 6

the near-end in/oration re/lects the per/orance o/ the one-Bay section or path /ro A to 6

the /ar-end in/oration re/lects the per/orance o/ the one-Bay section or path /ro 6 to A









The per/orance counters are lin7ed to Terination +oints ET+sF to counttransission errors.

The operator can initiate per/orance onitoring on one or ore su8setso/ counters /or each T+.

5ata is collected autoatically and periodically 8y the OS.

The ain per/orance anageent /unctions are=

con/iguring the counting period E1 in andHor 2) hoursF /or each o/ the 'Isper/orance points

con/iguring Juality thresholds collecting per/orance data

displaying per/orance data

The history /iles are date-and-tie-staped 8y the 4TC Eas /or alarsF.

The easureent intervals 8egin at 00=00 E4TCF /or 2)-hour periods and at >>=00: >>=1: >>=!0: >>=) /or1-inute periods.

5ata collection ta7es place at 00=02 /or 2)-hour periods and every tBo hours /or 1-inute periods.

Thresholds

The thresholds can 8e de/ined separately /or 1-inute and 2)-hour counters.

/ threshold values are e>ceeded /or a T+: a Threshold Crossing Alar ETCAF is generated 8y the '.








(anaged S53 per/orance counters ElocalF

66' 6ac7ground 6loc7 'rror

'6 'rror 6loc7

'S 'rrored Second

S'S Severely 'rrored Second

CS'S Consecutive Severely 'rrored Second

4AT 4nAvaila8le Tie

4AS 4nAvaila8le Second

66'

The 66' counter easures the nu8er o/ errored 8loc7s occurring outside o/ an S'S.

;or the 's that are 8ased on %.921 counter /orat.

'6

A 8loc7 Bith one or ore errored 8its.

'S

A period o/ one second Bith one or ore errored 8loc7s.

S'S

A period o/ one second Bhich contains ore than !0K errored 8loc7s: or at least one Severely5istur8ed +eriod ES5+F.

An S'S is also counted as an errored second.CS'S

A seJuence o/ G consecutive S'S: in Bhich G can 8e con/igured.

4AT

A 4AT is a period Bhich 8egins on the occurrence o/ ten consecutive S'S events.

These 10 seconds are considered to 8e part o/ an unavaila8le tie period.

A unavaila8le tie period ends Bhen ten consecutive non-S'S events occur.

4AS

A 4AS is a second that is part o/ an unavaila8le tie period.








(anaged S53 per/orance counters EreoteF

;'66' ;ar 'nd 6ac7ground 6loc7 'rror

;'6C ;ar 'nd 6loc7 'rror Count

;'6' ;ar 'nd 6loc7 'rror

;'CS'S ;ar 'nd Consecutive Severely 'rrored Second

;''S ;ar 'nd 'rrored Second

;'S'S ;ar 'nd Severely 'rrored Second

;'4AS ;ar 'nd 4nAvaila8le Second

;'66'

;ar end 66'

;'6C

denti/ies: on a terinal: the nu8er o/ errored 8loc7s counted Bithin a second: received 8y the /arend terinal

;'6'

;ar end '6

;'CS'S

;ar end CS'S

;''S

;ar end 'S;'S'S

;ar end S'S

;'4AS

;ar end 4AS








Other S53 per/orance counters

O;S Out o/ ;rae Second

+SC +rotection SBitch Counter

+S5 +rotection SBitch 5uration

+C +ointer usti/ication Counter

;'C ;orBard 'rror Correction

O;S

An OO; EOut O/ ;raeF second is de/ined as a second in Bhich one or ore out-o/-/rae eventsoccur.

This event is identi/ied on octets A1HA2 o/ the S53 /rae.

+SC

u8er o/ sBitches 8etBeen the service channel and the de/ence channel.

+S5

5e/ence duration.

+C

Represents the nu8er o/ pointer <usti/ication events counted: increasing or reducing the pointer.

usti/ication is used to adapt the ratio o/ the received container Bith the ratio o/ the transittedcontainer.

;'C

u8er o/ errored ;'C 8loc7s during a tie unit.








+er/orance (onitor on OT-%."0& /raes E5igital MrapperF

There are tBo 6+-9 8ytes carried 8y the %."0& /raes.

A 6+-9 8yte in the OT4-7 header: onitoring the OT4 lin7 ESection (onitoringF

A 6+-9 8yte in the O54-7 header: onitoring the O54 lin7 E+ath (onitoringF

Also: the ;'C decoding process gives in/oration a8out hoB any errorscould 8e corrected or not in the received /rae.

3 8 2 5

4 0 8 0

1 7 8 1 4 1 5 1 6 1 7

3 8 2 4

1

2

3

4

ODUk

OH

Client Signal

mapped in

OPUk Payload

OTUk FEC

OTUk OH

Soe types o/ eJuipent supported 8y the 1!0 O(S Ee.g. 19!0+SSF are copliant Bith the OT-%."0&

T4-T recoendation E5igital MrapperF: and as such they support +( at 5igital Mrapper layer.

5igital Mrapper supports a per/orance onitoring echanis 8ased on 6+-9: siilar to the onepreviously descri8ed /or S53.

RS Corrected Count= u8er o/ errors corrected 8y the ;'C

RS 4ncorrected Count= u8er o/ errors not corrected 8y the ;'C

S(6+9 'rror Count= u8er o/ errors counted in the OT4-7 6+-9 ESection (onitorF

+(6+9 'rror Count= u8er o/ errors counted in the O54-7 6+-9 E+ath (onitorF

S( 'rrored Seconds= u8er o/ errored seconds counted in the Section (onitor

+( 'rrored Seconds= u8er o/ errored seconds counted in the +ath (onitor

S( Severely 'rrored Seconds= u8er o/ errored seconds counted in the Section (onitor

+( 'rrored Seconds= u8er o/ severely errored seconds counted in the +ath (onitor

S( 4navaila8le Seconds= u8er o/ unavaila8le seconds counted in the Section (onitor

+( 4navaila8le Seconds= u8er o/ unavaila8le seconds counted in the +ath (onitor







PM on WDM signal (FEC)


+er/orance (onitoring on ;'C

The eJuipent supported 8y the 1!0O(S Ee.g. 19!0+SSF and copliantBith the OT-%."0& T4-T recoendation E5igital MrapperF also

supports +( at ;'C layer= ;'C is inserted 8y the transponder on the colored transission side: and the

receiving transponder is a8le to detect errors and possi8ly correct the Bhiledecoding the ;'C.

+( on ;'C layer gives in/oration a8out the signal Juality 8etBeen thetransitting transponder colored output and the receiving transponder coloredinput.

CS ECorrected SecondF= a second in Bhich at least a corrected error is detected

4S E4ncorrected SecondF= a second in Bhich at least an uncorrected error is detected6'C E6ac7ground 'rror CorrectedF= a ;'C corrected error that occurred outside a SCS Eresult is divided8y 12F

SCS ESeverely Corrected SecondF= a second Bith a ;'C layer de/ect or at least one ;'C uncorrected 8loc7or ore than !!:!9:0)9 ;'C corrected errors

664 E6ac7ground 6loc7 4ncorrectedF= a ;'C uncorrected 8loc7 that occurred outside a S4S

S4S ESeverely 4ncorrected SecondF= a second in Bhich a ;'C layer de/ect occurred or in Bhich orethan !!:!9:0)9 ;'C 8loc7s Bere uncorrected

4AS E4nAvaila8le SecondF=

A 4AS is a second that is part o/ an unavaila8le tie period.

An unavaila8le period is a period o/ tie Bhich 8egins on the occurrence o/ ten consecutive S4Sevents.

These 10 seconds are considered to 8e part o/ an unavaila8le tie period: so these 10 seconds are4nAvaila8le Seconds.

An unavaila8le tie period ends Bhen ten consecutive non-S4S events occur.

6'R E6it 'rror RateF= not a priitive counterN the '(L coputes the 6'R 8ased on the 6'C counter

; E-;actorF= not a priitive counterN the '(L coputes the -;actor 8ased on the 6'R






4 · 2 ·17CO+R%3T © ALCAT'L-L4C'T 2012. ALL R%3TS R'S'R$'5.


+er/orance (onitoring on 'thernet

!ecei"edpac#ets

!ecei"edpac#ets

DiscardedPac#ets

DiscardedPac#ets

$ransmittedpac#ets

$ransmittedpac#ets

t alloBs to analy?e tra//ic 8ehavior on a speci/ic 'thernet inter/ace.ncoing and Outgoing tra//ic directions are analy?ed.

Port 1 Port 2

Port 3 Port 4





Section ) * (odule 2 * +age 191!0 O(S '(L * R&. Operation and (aintenance(aintenance Applications * +er/orance (onitoring anageent

4 ·2 · 18CO+R%3T © ALCAT'L-L4C'T 2012. ALL R%3TS R'S'R$'5.


+er/orance (onitoring on 'thernet @cont.

The syste supports 'thernet Aggregated octetH/rae counters and alsooctetH/rae counters on per /loB EserviceF 8asis.

(onitored o8<ect=

INFLOW

OUTFLOW

REMOTEEth. Port

S D H

p o r t A

A U 4

S D H X

C

E T S

X C

LOCAL Eth.Port

Transitted /raes

Received /raes

Received /raes

Transitted /raes








(anaged 'thernet per/orance counters

TRCO ETotal Received Correct OctetsF= total nu8er o/ octets o/ 'thernet /raesreceived correctly 8y the 'thernet nter/ace: including 'thernet header characters

TRC; ETotal Received Correct ;raesF= total nu8er o/ 'thernet /raes received

correctly 8y the 'thernet nter/ace TTO ETotal Transitted OctetsF= total nu8er o/ octets o/ 'thernet /raes transitted

out 8y the 'thernet nter/ace: including 'thernet header characters TT; ETotal Transitted ;raesF= total nu8er o/ 'thernet /raes transitted out 8y

the 'thernet nter/ace TR5; ETotal Received 5iscarded ;raesF= total nu8er o/ 'thernet /raes on incoing

signal Bhich Bere chosen to 8e discarded

TT5; ETotal Transitted 5iscarded ;raesF= total nu8er o/ 'thernet /raes onoutgoing signal Bhich Bere chosen to 8e discarded

TRS'; ETotal Received Service 'rrored ;raesF= total nu8er o/ 'thernet /raesreceived incorrectly 8y the $irtual 'thernet nter/ace

Counters are sapled Bith P1h OR 1 inQ A5 2)h granularity periods. All counters are /ree-running. This eans that they are not reset at the end o/ thesapling period. ;or this reason: reports on 'thernet counters are availa8le in '(LshoBing deltas Bith respect to the previous easureent.

SA-'S1H): starting /ro Rel 1.! on: and SA-'S1: starting /ro Rel. 2.2 on: support +(

granularity period o/ either 1h or 1in Eplease note that ALL cards on the sae ' ust 8e con/iguredBith the sae granularity period: i.e. either 1in or 1hF.

;or these 7inds o/ 8oard: '(L supports the tBo granularity types: Bith the /olloBingcon/iguration notes and constraints=

The desired granularity is set in the con/iguration /ile o/ the '(L( supporting the 'E'(L(COR6AS(+F during the syste con/iguration Esee details in the Adinistration hand8oo7s andTraining (anualsFN '(L( then sets the onitoring granularity on the ' at the Start Supervision. 5ueto the /act that the con/iguration /ile is uniJue /or all the '(L(COR6AS(+ instantiated in thesyste: the conseJuence is that the selected granularity should apply to the SA-'S 8oards o/ theBhole netBor7 supervised 8y '(L.

(i>ed netBor7s Bhere soe SA-'S provide 1in and soe others SA-'S provide 1h data are

not supported.Mhen the supervision is started 8y '(L on an SA-'S Bith a di//erent onitoring granularity period: all

the +( points o/ that ' sBitch to the granularity con/igured in '(L.








+er/orance (onitoring on 'thernet= Aggregated Counters

INFLOW

OUTFLOW S

D H

p o r t A

A U 4

Transitted /raes

Received /raes

Received /raes

Transitted /raes

Aggregate counters onReceived ;raes=

TRC;

TRC; 6roadcastTRC; (ulticastTRC; 4nicastTRCOTR5;

TRS';

Aggregate counters onTransitted ;raes=

TT5;

TT;TT; 6roadcastTT; (ulticastTT; 4nicast

TTO

TRC;= nu8er o/ Total Received Correct ;raes

TRC;-6roadcast= nu8er o/ Total Received Correct ;raes o/ 6roadcast type

TRC;-(ulticast= nu8er o/ Total Received Correct ;raes o/ (ulticast type

TRC;-4nicast= nu8er o/ Total Received Correct ;raes o/ 4nicast type

TRCO= nu8er o/ Total Received Correct 'thernet Octets

TR5;= nu8er o/ Total 5iscarded ;raes on ncoing signal

TRS';= nu8er o/ Total Received Service 'rrored ;raes

TT5;= nu8er o/ Total 5iscarded ;raes on outgoing signal

TT;= nu8er o/ Total Transitted 'thernet ;raes

TT;-6roadcast= nu8er o/ Total Transitted 'thernet ;raes o/ 6roadcast typeTT;-(ulticast= nu8er o/ Total Transitted 'thernet ;raes o/ (ulticast type

TT;-4nicast= nu8er o/ Total Transitted 'thernet ;raes o/ 4nicast type

TTO= nu8er o/ Total Transitted 'thernet Octets








+er/orance (onitoring on 'thernet= +er ;loB Counters

IN

FLOW

OUT

FLOW S

D H

p o r t A

A

U 4

Transitted /raesReceived /raes

ngress ;loB counters=

TRC;g

TRC;y

TRCOg

TRCOy

'gress ;loB counters=

TT;g

TT;y

TTOg

TTOy

TRC;g= nu8er o/ Total Received Correct green ;raes

TRC;y= nu8er o/ Total Received Correct yelloB ;raes

TRCOg= nu8er o/ Total Received Correct green 'thernet Octets

TRCOy= nu8er o/ Total Received Correct yelloB 'thernet Octets

TT;g= nu8er o/ Total Transitted green 'thernet ;raes

TT;y= nu8er o/ Total Transitted yelloB 'thernet ;raes

TTOg= nu8er o/ Total Transitted green 'thernet Octets

TTO = nu8er o/ Total Transitted yelloB 'thernet Octets







otes page only Estandard notes te>t /ield e>tendedF

SBitch to notes vieBC Soe 's anaged 8y 1!0 O(S Ee.g 12L( and 19!0+SSF also support the so-called P+CSQ E+hysicalCoding Su8layerF or P'thernet Layer 1Q +er/orance (onitoringon soe o/ their 'thernet inter/aces .They are norally availa8le on 1%6'th or 10%6'th inter/ace and are 8ased on hoB the +hysical CodingSu8layer o/ the 'thernet protocol stac7 anages the coding structure o/ the 'thernet /rae.

n case o/ 1%6'th inter/ace: the 96H106 coding is used= Ta8les !-1 and !-2 o/ the 902.! standard E200 ed.: section !F list all possi8le co8inations

o/ received encoded Bord E106F /or each initial Bord E96F according to their running polarityEnon-?ero disparity 8loc7s ust alternate in polarityF

6ased on those ta8les: an error event is raised Bhen the received Bord is /ound in Ta8les !-1 or !-2 8ut in the colun Bith Brong disparity:

eaning that an error occurred during transission PR5'Q event ERunning 5isparity'rrorF

the received Bord is not /ound in any o/ 8oth ta8les Pnvalid MordQ event n case o/ 10%6'th: the )6H6 coding is instead used

Mhen the receiver detects a Brong con/iguration o/ the 2 synch header 8its o/ the 6 8loc7: anerrored 8loc7 is detected

'rrors are accuulated in a counter Ecalled C%nvalid Code %roupF6ased on the C%: the /olloBing S53-li7e counters are processed 8y the syste=

'S At least one C% or one LOS or LO; Bithin the second

S'S u8er o/ C% corresponding to a 6'RU10'- or one LOS or LO;

66' C% occuring outside an S'S








Analog per/orance onitoring

Soe M5( 's Ee.g. 12L(: 120L(: 1&(S: 19!0+SSF support theonitoring o/ analog values.

6asically: the Analog +( involves all the easureents availa8le in the '4S( at %&uipment 'or (oard) *nstantaneous +easurements .These include= T> Optical +oBer Level R> Optical +oBer Level 6ias Current Level Teperature 'tc./or 8oards such as Transponders: (u>H5eu>: Apli/ier: etc.

'(L is in charge o/ sapling and storing the inputHoutput poBer values inthe +( 56. The user can then select (onitoring +oints to generate theReports.The sapling periods are 1 V 2)h.








T-(+LS per/orance onitoring

Soe eJuipent supporting T-(+LS Ee.g. 19!0TSS-!20 R!.0F: provides theonitoring o/ soe speci/ic counters.

These include= (6 E(onitored ncoing u8er o/ 6ytesF

(+ E(onitored ncoing u8er o/ +ac7etsF

(O6 E(onitored Outgoing u8er o/ 6ytesF

(O+ E(onitored Outgoing u8er o/ +ac7etsF

Outgoing and ncoing 6ytes and +ac7ets are counted per port.







2 Con/iguring per/orance points








Threshold ta8les E! and )% ! 'sF

1. Open an eJuipent vieB2. Select the enu=

Configuration Performance $,res,old $a-les n this BindoB: you can per/or the /olloBingoperations on a thresholds ta8le= create odi/y display delete attach Elin7 to a T+ entityF

ESoe operations are /or8idden i/ the node isanaged 8y 1!0O(S-S53F

!. Select the ta8le /ro the list Ee>cept /orcreationF

). Clic7 the 8utton representing the action youBant to carry out

.6.= n this chapter only the con/iguration o/ S53 per/orance points and Analog +( on !: )% ! and

1!0TSS-!20 R! eJuipent are ta7en into consideration.+er/orance points on 19!0+SS eJuipent are autoatically ena8led as soon as the related inter/ace isset in service 8y the operator or 8y the anageent syste.

;or the con/iguration o/ 'thernet: T-(+LS and ;'C per/orance points: and /or other 7inds o/eJuipent: please re/er to the Operator 3and8oo7s and Training (anuals o/ the speci/ic ' /aily.








'>aple o/ threshold ta8les E! and )% ! 'sF

P5isplayQ gives this vieB

Section / Path type Block size (bits) Blocks per fra me Blocks per second BIP typeSTM-N - RS 19440 x N 1 8000 BIP – 8

STM-N – MS 801 24 x N 192000 x N BIP – 24xN

STM-1 – RS 19440 1 8000 BIP – 8

STM-1 – MS 801 24 192000 BIP – 24

VC4 18792(261x9x8) 1 8000 BIP - 8

VC3 6120 1 8000 BIP - 8

VC12 1120 0,25 2000 BIP - 2








Threshold ta8les E19!0+SSF

1. Open an eJuipentvieB

2. Select ./ystem0 in thele/t resources tree

!. Clic7 on.Performance0 in the

PSelection ;unctionQ

). Clic7 on .$C1Profiles0 ta8 and then.!etrie"e0

. Select a P+ro/ile typeQ

. Select a +ro/ile 5 andthen clic7 on P5etailsQ

2. !.

).

.

.








'>aple o/ threshold ta8les E19!0+SSF

P5etailsQ gives this vieB= the user can change the desired values andclic7 on .1pply0








StartingHstopping +( E! and )% ! 'sF

1. 5isplay the port "ie of a -oard

2. Select a T+ E(ST: RST: A4): $C-n: T4-nF

!. Select the enu Port Performance Configure Performance +onitoring

). Select a P+$C+$C$ as (onitor Ei/reJuiredF

. Tic7 P5ata CollectionQ

. '(L OS (onitoring= select arc,i"ing orarc,i"ing on t,res,old crossed

". Choose a proper $,res,old ta-le and 1ttac, it

9. Clic7 1pply

&. Clic7 on /et 1/1P i/ you Bant tocon/igure ASA+

10. Clic7 1pply

11. Clic7 the Close 8utton

+O(= +ath Overhead (onitoring.

TC(= Tande Connection (onitoring. TCT= Tande Connection Terination.(ode

data collection= select this 8utton to ena8le per/orance onitoring.

create history data= i/ this option is selected: history data is collected in the entity selected /or thecorresponding T+.

Loc7 data collection= i/ selected: per/orance onitoring reains active 8ut data collection isstopped. All the history data reains availa8le. All current values are set to ?ero.

'(L OS (onitoring= Clic7 on 'na8le and select PArchivingQ or PArchiving on threshold crossedQ.

oti/ications

4AT= noti/ications o/ 4AT E4nAvaila8le TieF are created i/ the option is ena8led. This noti/ication is

re/lected in a 4AT alar in the AS. .6. This paraeter can only 8e selected Bhen creating and cannot 8e odi/ied

su8seJuently.

Suppress Additional Threshold=

/ this option is ena8led: noti/ication is sent only /or the /irst counter that e>ceeds thethreshold de/ined during a granularity period.

/ the option is disa8led: the threshold violation o/ each counter is indicated.

Threshold ta8le

Lin7 a threshold ta8le to the selected T+. Assign only the threshold ta8les that correspond to thegranularity period o/ the data sets Ea 1-inute threshold ta8le ust not 8e assigned to a data setcovering 2) hoursF.

Clic7 the Attach... 8utton to open the BindoB /or selecting the threshold ta8le.

Select the Reove 8utton to separate the threshold ta8le /ro the entity.








3oB to set Analog +( in ' 4S( E! and )% ! 'sF

Open the eJuipent vieB

Select Configuration 1nalog P+ Configuration

On etBor7 'leent

/or con/iguring the Analog +( on all the eJuipent Ethe /olloBing BindoB Bill openF On selected o8<ect

/or con/iguring the Analog +( on the single selected 8oard








3oB to set Analog +( in ' 4S( E! and )% ! 'sF @cont.

Start +( 8y selecting /tart in the P+( actionQ colun /or the 1in or the 2)h

/ the data ust 8e sent to the OS: the

PArchivingQ cell ust 8e set to 5es Clic7 on 1pply




Section ) * (odule 2 * +age !!




StartingHstopping +( E190TSS-!20 R!F

1. Select the desired port:then clic7 on ./$+ P+0




Section ) * (odule 2 * +age !)




StartingHstopping +( E190TSS-!20 R!F @cont.

2. Clic7 on .P+ +ode0

ocation= ear 'nd: ;ar 'nd: 6idir: All

Direction Receive: All

+ode $ype +( /or All +araeters: only /or RS: only /or (S

P+ /tate= On: O// or 5isa8led. Set to

$ime Period 1 (in: 1 5ay: 6oth

!. ;ill in the desired value/or all the paraetersshoBn in the page

). Clic7 on ./a"e0








StartingHstopping +( E19!0+SSF

There isnWt any anual procedure to start the +( on the 19!0+SS.

Counters are onitored and processed in the ' as soon as the involvedinter/aces are set in service in the '.

These counters can 8e retrieved=

Mith the local XC terinal Enot the PshoB eJuipentQ o/ the 1!0O(S-'(LF

Mith the procedures availa8le in the (S-%4 o/ the 1!0O(S-'(L Esee in the/olloBingF







'>ercise

;olloBing instructor recoendations: con/igure a +( easureent.

Tie alloBed= inutes




Section ) * (odule 2 * +age !"



! 5isplaying per/orance data








5isplaying +( data /or a single T+ E! and )% ! 'sF

;ro the 'Juipent vieB=

1. 5isplay the port vieB o/ a 8oard

2. Select a suita8le T+!. Select the enu Port

Performance DisplayCurrent Data

). Select T+H+O(HTC(HTCTEin case o/ A4) or T4-nF

. Select the reJuired granularity

Clic7 !efres, to update the countersW

value

Adinistrative State= ndicates Bhether per/orance data selection is loc7ed /or the local

user.Operational State= ndicates Bhether per/orance onitoring is operational.

Suspect 5ata= ndicates Bhether data collection errors have occurred during thecollection period.

Threshold Ta8le= ndicates Bhich threshold ta8le is assigned to the entity.

Current +ro8le List= ndicates the current 4AT Eunavaila8le tieF and TCA Ethresholdcrossing alarF alars.

'lapsed Tie= ndicates the tie that has elapsed since the start o/ the onitoringinterval. This in/oration tells the user Bhether data collection covers the total period.

Reset= Reset counters to ?ero /or the running period.

.6.= n this Chapter only the displaying o/ S53 per/orance data on !: )% ! and190TSS-!20 R! eJuipent are ta7en into consideration.

;or the display o/ 'thernet and ;'C per/orance data: and /or other 7inds o/ eJuipent:please re/er to the Operator 3and8oo7s and Training (anuals o/ the speci/ic ' /aily.




Section ) * (odule 2 * +age !&




5isplaying +( data history /or a single T+ E! and )% ! 'sF


1. 5isplay the port vieB o/

a 8oard2. Select the T+

!. Select the enu Port

Performance

Display :istory Data

). Select T+H+O(HTC(HTCTEin case o/ A4) or T4-nF

. Select the reJuiredgranularity

Clic7 !efres, to update theBindoBWs data

nterval 'nd Tie= dd..yyyy hh==ss.

'lapsed Tie= indicates Bhether data collection is /inished.susp= indicates suspect data /or Bhich collection errors have occurred during the

collection period.

n the case o/ 1-inute entities: up to 1 data sets can 8e displayed siultaneously /oreach T+N the a>iu nu8er o/ data ites /or 2)-hour entities is eJual to three EeJual to one /orO(SF. These values cannot 8e odi/ied 8y the user.

/ the liit o/ 1 data sets /or a granularity o/ 1 inutes and three data sets /or agranularity o/ 2) hours is reached: the oldest data in the list is overBritten 8y the neB data collected.








5isplaying +( data /or a single T+ E190TSS-!20 R!F


1. 5isplay the desired port

2. Select the /$+ P+ /older!. Select P+ !eport su8/older

). ;ill in the desired value /or all theparaeters shoBn in the pageESee otesF

. Clic7 !etrie"e to update thecountersW value

+onitor e"el TBo BindoBs co8o 8o>. The second BidoB can 8e set to=

D= all intervals are retrieved: e>cept /or the incoplete intervalsD!C+P= all intervals are retrieved

;P= only the intervals Bith counters eJual or greater than the values set in the /irst BindoB areshoBn: e>cept /or the incoplete intervals

;P!C+P= only the intervals Bith counters eJual or greater than the values set in the /irstBindoB are shoBn

ocation ;'5: '5: 65R: ALL

+onitored parameter type Counters to 8e shoBn

Direction RC$: TR(T: ALL

$ime Period 1 (: 1 5A or ALL

( Mhen using a 19!0+SS: the per/orance data cannot 8e retrieved 8y the eJuipent vieB o/ the1!0O(S. The operator ust use the local terinal EXCF.







'>ercise

5isplay the +( data.

Tie alloBed= inutes







) +er/orance reports




Section ) * (odule 2 * +age )!




Step 1= avigation to +( 5oains

;ro the (S-%4: select ./earc,

P+ P+ Domains on %+60

Availa8le +( 5oains= i/ PO//lineQ: it is an Archive.




Section ) * (odule 2 * +age ))




Step 2= avigation to (onitored 's

Right clic7 the desireddoain and ./earc,

+onitored 8%s4$Ps0








avigation to (onitored T+s /ro the ' List

Right clic7 the desired 'and ./earc, /,o2 P+0




Section ) * (odule 2 * +age )"




Step )= %enerating the Report

1. Select the desired T+ Eorgroup o/ T+sF: right clic7and .1ctions

<enerate $a-ular= 6ineC,art or (ar C,art

!eport0

2. Select the onitoring period usingthe calendar Eclic7 on F and thegranularity: then clic7 on .1pply0








Ta8ular Report E'>apleF

The ta8le can 8e sorted8y the desired colun




Section ) * (odule 2 * +age )&




Line Chart Report E'>apleF

A8solute or logarithicscale on the a>is

Select the desiredo8<ect andparaeters 8yclic7ing on the








6ar Chart Report E'>apleF

(ove the vieB tothe right or to thele/t 8y acting onthe 8ar








;orced reading o/ +( counters

;orced reading is used to collect data iediately Bithout Baiting /or theend o/ the ne>t collection period.

>alid only for 15?minute counters1. 5isplay any e&uipment "ie

2. Select Configuration Performance @orced PerformanceCollection

;orced reading has no e//ect on the autoatic per/orance counter collection process:

e>cept that 8loc7s already collected Bill 8e collected again./ the /orced reading reJuest occurs at the sae tie as an autoatic collection period:

the /orced collection Bill 8e ignored.

The /orced collection Bill 8e re<ected i/ the reJuest happens in the tBo inutes /olloBingthe end o/ a 1-inute counting period.








Search /or a T+ or an ' 8y naeHtypeHrelease

1. Right clic7 the desireddoain Eor 'F and.1ctions /earc, -y

8ame0

2. Select the search type= ' or T+

)..3A0 or .1pply0

!. Set at least one /ilter=- ae +attern

- in case o/ PSearch 'Q= the 'Ws userla8el- in case o/ PSearch T+Q= the T+Ws nae- case sensitive- Bildcard character Y

- T+ Type- ' type and release

•'>aples o/ T+ nae=

• 10S(• !6Hr01sr1sl2HportZ001-(sTT+-+('TR1

• 190TSS-!20

• C!22HST(1-1-1-21-): L: ;'5: RC$: 1-(








Search /or a T+ 8y $alue

1. Right clic7 the desireddoain Eor 'F and.1ctions /earc, -y>alue0

2. Con/igure PSearch periodQ

!. Set the search criteria=select the counter: theoperator and there/erence value

). Clic7 .3A0 or 1pply0

Search period=

•4ser speci/ic [ Start tie [ 'nd tie

•Last...4ntil [ 'nd tie [ %ranularity

•Latest - %ranularity

•Current - %ranularity








5elete Pot activeQ ites

5elete the selected

Pot ActiveQ T+s

5elete the selected

Pot ActiveQ 's

5elete all the

Pot ActiveQ T+s








'>port P+( T+s listQ to a CS$ /ile on the Server

1. Select a doain Actions '>port T+s to CS$ /ile

\S53,'(L#1-&.HC!22HC!22HST(1-1-1-21-): L: ;'5: RC$: 1-(\

' user la8el T+

2. 'dit the PpathH/ilenaeQ the /ile isto 8e saved to in the server.

• i/ you donWt speci/y any /ile naeEe.g. you 7eep <ust PHtpHQF the

/ile nae Bill 8e PT+List.csvQ !. Apply

T+ e>aple E190TSS-!20F

PHtpHQ 8y de/ault








'>port data to a CS$ /ile on the +C

1. %enerate a ta8ular report

2. Select the roBsto 8e e>ported

!. Clic7







'>ercise

Create a line report

'>port data to a CS$ /ile on your +C

Tie alloBed= inutes







'nd o/ odule+er/orance (onitoring anageent



Copyright © 2012 Alcatel-Lucent. All Rights Reserved.TOS!01"#$!.1-S%-R&.-'d1 (odule ).! 'dition 1

**S'C



(odule !Logs anageent

TOS!01"#$!.1-S%-R&.-'d1 (odule ).! 'dition 1


1!0 O(S '(L



Section ) / (odule ! / age 1




1!0 O(S '(L / R&. Operation and (aintenance(aintenance Applications / Logs anageent

4 · 3 · 2COR+%T © ALCAT'L-L3C',T 2012. ALL R+%TS R'S'R$'4.

5lan6 page


4ocuent istory









(odule o8<ectives

3pon copletion o7 this odule: you should 8e a8le to=

(onitor the coands issued 7ro (S-%3+: '>uipent $ie? and localanageent tools

Section ) / (odule ! / age !






(odule o8<ectives @cont.


Section ) / (odule ! / age )






Ta8le o7 contents

S?itch to notes vie?B age

1 Available log reports "2 Logs provided as a list in MS-GUI &3 Logs in Eqip!ent "ie# 13 Alar! Srveillan$e-li%e event logs 22

Section ) / (odule ! / age





4 · 3 · &COR+%T © ALCAT'L-L3C',T 2012. ALL R+%TS R'S'R$'4.

Ta8le o7 contents @cont.

S?itch to notes vie?B


Section ) / (odule ! / age





4 · 3 · (COR+%T © ALCAT'L-L3C',T 2012. ALL R+%TS R'S'R$'4.

1 Availa8le log reports

Three types o7 reports

Logs provided as a list in (S-%3+

Logs in '>uipent $ie?

Alar Surveillance-li6eevent logs






4 · 3 · )COR+%T © ALCAT'L-L3C',T 2012. ALL R+%TS R'S'R$'4.

2 Logs provided as a list in (S-%3+

Section ) / (odule ! / age &





4 · 3 · 1*COR+%T © ALCAT'L-L3C',T 2012. ALL R+%TS R'S'R$'4.


Open the 3AL %3+

... riority Records=

• priority 1 coands

(y ...=

• coands 8y the 1!0 O(S login

• coands 7ro '(L: S4: T: D4(

All ...=

•

coands 8y all 1!0 O(S and E+C logins• coands 7ro '(L: S4: T: D4(:E+C

Addressed logs

applicationFs logs= coands eGecuted in (S-%3+ H'(LIS4ITID4(J

,'Fs logs

coands eGecuted in E+CID'5-3+

190TSS-100 R!.2: 190TSS-!20 R!.: 19!0SS R!..2

coands eGecuted in ,'Fs '>uipent $ie? in 1!0O(S-'(L

4e7ault collection ties H3TCJ= 02=00 K 09=00 K 1)=00 - 20=00

the collected data is availa8le in 3AL-%3+ alost a7ter 1 hour

CoandFs priority

1 HhighJ or 0 Hlo?J= 8y de7ault: all the events have priority0

itFs assigned 8y 1!0O(S according to a con7iguration 7ile Ac6no?ledgeent o7 the coands in 3AL-%3+

priority 0 coands

autoatically ac6no?ledged at collection ties 8y 1!0O(S HAc6no?ledged 8y AdinJ i7 olderthan 29 hours OR ...

... to 8e anually ac6no?ledged 8y the user

priority 1 coands

to 8e anually ac6no?ledged 8y the user

Logs are deleted 7ro 3AL-%3+ a7ter !0 days








3AL %3+ in7o








'Gaples= operation 8y eans o7 1!0 O(SFs applications

ath creation 8y eans o7 1!0 O(S S4

M4elete ,'N and MLocal access grantedN 8y eans o7 1!0 O(S '(L

%3+ Server 1!0O(SFs user

CFsaddress

athFsnae

,'Fsnae








'Gaples= ,' con7iguration

Coands on ,' 8y eans o7 '(LFs '>uipent $ie?

M(S loc6outN on 190TSS-!20

MSetN a card in 10S(

Coands on ,' 8y eans o7 E+C

M4eclare a cardN and MLoginN on 190TSS-!20

,'Fsnae

1!0

O(SFs user

,'Fsnae

1!0O(SFs user

,'Fsnae

E+CFsuser

Section ) / (odule ! / age 1!







Ac6no?ledge

Ac6no?ledgeent o7 the coands in 3AL-%3+=

priority 0 coands

autoatically ac6no?ledged 8y 1!0 O(S HAdinJ i7 29-hour old OR anually ac6no?ledged 8y the user

priority 1 coands anually ac6no?ledged 8y the user only

List sorted8y MTieN

revious collection

Last collection

Section ) / (odule ! / age 1)






! Logs in '>uipent $ie?






4 · 3 · 1&COR+%T © ALCAT'L-L3C',T 2012. ALL R+%TS R'S'R$'4.


'Gaple 7or 190TSS-!20

Security Adinistration ,et?or6 'leent Logs






4 · 3 · 1'COR+%T © ALCAT'L-L3C',T 2012. ALL R+%TS R'S'R$'4.


'Gaple 7or 190TSS-!20 @cont.

Con7iguration eGecuted 8y eans o71!0 O(S

Con7iguration eGecuted 8y eans o7E+C

11.&9.!!.&&= serverFs + addressadin= E+CFs user

Section ) / (odule ! / age 1"





4 · 3 · 1(COR+%T © ALCAT'L-L3C',T 2012. ALL R+%TS R'S'R$'4.


'Gaple 7or 190TSS-!20 @cont.

Coparison 8et?een ,' log and 1!0 O(S log

M4eclare a cardN 8y eans o7 E+C

Client/User From/To Command

TL1/paolo 1!"#"#"1/$#% &E'T-E()T::1#*+,-1-1:c%.!:::)R,0+0,'EDTY)E1)1#*+, A0'+2,DE',3A0T

++40T++1#:0+&

,'Fsnae

E+CFsuser

3 A L

% 3 +

, ' l o

g






4 ·3 ·1)COR+%T ©A LCAT'L-L3C',T 2012. ALL R+%TS R'S'R$'4.


'Gaple 7or 10S(

5y the '(L3S(: the user has the possi8ility to 8ro?se the event logstored in the (+5 o7 that single ,'.

Clic6 on 'vent Log

Section ) / (odule ! / age 1&





4 ·3 ·2*COR+%T ©A LCAT'L-L3C',T 2012. ALL R+%TS R'S'R$'4.


'Gaple 7or 10S( @cont.

The event records can 8e 7iltered 8y the user per type and tie=

Choose M;ilterN or M,o ;ilterN toapply or not the 7ilter

;ilter 8y 'vent

tie

;ilter 8y 'vent

Type







! Alar Surveillance-li6e event logs







) Alar Surveillance-li6e event logs

De8 ortal

Start MCurrent

'vents LogN 7rothe De8 ortal

Section ) / (odule ! / age 2!







Su8lists

,'s=190TSS-100190TSS-10I!20

19!0SS12L(

'vents=- S,C s?itch- Loop8ac6

- T-(LS tunnel s?itch

Su8lists 7or S,Cand Tunnel s?itch

Su8list 7orLoop8ac6s

Section ) / (odule ! / age 2)







Loop8ac6 on 190TSS-!20

o? to issue a loop8ac6 on an ST( port in 190TSS-!20 7ro '>uipent $ie?=

- Select the ST( port

- Set Mort (odeN Hde7aultA3TOJ to M,(O,N or M(O,N Save

- Set Mriary StateN to MOOSN HOut O7 ServiceJ Save

- +ssue the loop8ac6= MOperate Loop8ac6N






4 · 3 · 2&COR+%T © ALCAT'L-L3C',T 2012. ALL R+%TS R'S'R$'4.


T-(LS tunnel on 190TSS-!20

rotection S?itch H(anualJ=e.g. Loc6out coand

1. To get details on thealar= dou8le clic6 thealr

2. Choose MAdditional+n7orationN

L o c 6

o u t

; o r c e s ? i

t c h

t o s p a

r e






4 · 3 ·2(COR+%T © ALCAT'L-L3C',T 2012. ALL R+%TS R'S'R$'4.

'Gercise

Retrieve the three types o7 logs ?hich are in relation ?ith the alare>uipent created in the Alar anageent chapter

Tie allo?ed= 10 inutes




Copyright © 2012 Alcatel-Lucent. All Rights Reserved.TOS!01"#$!.1-S%-R&.-'d1 (odule ).) 'dition 1

**S'C



(odule ),' sotare donload

TOS!01"#$!.1-S%-R&.-'d1 (odule ).) 'dition 1


1!/0 O(S '(L



Section ) (odule ) age 1




1!/0 O(S '(L R&. Operation and (aintenance(aintenance Applications ,' sotare donload

4 · 4 · 2COR+%3T © ALCAT'L-L4C',T 2012. ALL R+%3TS R'S'R$'5.

6lan7 page


5ocu9ent 3istory


01 2012-11-0: $allet; Carole <irst edition







(odule o8=ectives

4pon co9pletion o this 9odule; you should 8e a8le to>

5onload a ne sotare pac7age to the ,' to upgrade its sotare release

Section ) (odule ) age !






(odule o8=ectives ?cont.@


Section ) (odule ) age )






Ta8le o contents

Sitch to notes vieA age

1 Downloading software to the NE "1.1 Sotare donload 8y <TS &1.2 Sotare donload ro9 'Buip9ent $ie 20

Section ) (odule ) age /






Ta8le o contents ?cont.@

Sitch to notes vieA


Section ) (odule ) age






1 5onloading sotare to the ,'

Section ) (odule ) age "






1 5onloading sotare to the ,'

To 9ethods

<ro9 (S-%4+ 8y 9eanso the <ile TranserScheduler <TSDE

<ro9 'Buip9ent $ieE

Section ) (odule ) age :






1.1 Sotare donload 8y <TS

Section ) (odule ) age &







,' Sotare ac7age preparation

rior to donloading a ne Sotare ac7age SFD to the ,'; itGsnecessary to have it in the server.

1. +n Fe8 ortal; start,' SF ac7ages








,' Sotare ac7age preparation ?cont.@

2. Clic7 +nstall and loo7 or the.5SC ile o the SF that is onyour C or on another 9edia








SF donload procedure

1. Select the ,' to donload in the ,etor7 'le9ent list

2. Right clic7 and select “Ations Download NE !oftware" > the

HCreate and activate sotare donload =o8I is opened!. Assign a na9e to the ne =o8

). Set the =o8 periodicity i99ediate; deerredD> in case o HdeerredI choose the activation ti9e

/. Clic7 on the ,' in the list; choose the Server and the SF pac7age todonload

. Clic7 “#$" or “A%%l&" to su89it the sotare donload =o8

". +n the =o8 list; right clic7 on the ne =o8 and issue “Ations

Ati'ate (o)"

6esides the a8ove procedure; the operator can 9anage 9anually the =o8Jsession creation; too.







2. Right clic7 and“Ations

Download NE!oftware"


SF donload procedure ?cont.@

1. <ro9 the ,etor7'le9ent list; selectthe desired ,'sD

Section ) (odule ) age 1!








+ theactivation isdeerred

choose dateand ti9e 8yclic7ing here

The user canspeciy a durationin hours; aterhich the =o8 ill8e auto9aticallystopped

!. Assign ana9e to the =o8

). Set the =o8periodicityi99ediate;deerredD

Section ) (odule ) age 1)








/a. Clic7 on the ,etor7'le9ent in the list

/8. Chec7Jselect the Server

/c. Select the SFpac7age to 8edonloaded

6y deault; <orceKTrue.

To have <orceK<alse;create 9anually o8 andSession.

Additional ,'Gs can 8e addedto the list 8y clic7ing here

. “A%%l&"

Section ) (odule ) age 1/





4 ·4 ·16COR+%3T ©A LCAT'L-L4C',T 2012. ALL R+%3TS R'S'R$'5.



+99ediate> ater HApplyI; the donload is started

5eerred> it aits or the Activation Ti9e








Other actions on SF 5onload =o8s

A SF donload =o8 can 8e> 'dited i not pendingD to 9odiy its periodicity i99ediate or deerredM periodicD

A8orted i FaitingD

5eleted i not pendingD

o8 Status> or running o8s

Report> or ended o8s

Section ) (odule ) age 1"







Activate the donloaded SF

+n order to see the SFstatus o the 9anaged ,'s>

Select “*ile +ransfer!hed,ler De%lo&ed !-"

Section ) (odule ) age 1:







Activate the donloaded SF ?cont.@

2. Clic7 on Activate to co99it the Stand-8y SF

1.Right clic7 on ,'and “!- Details"

A SF pac7age can also 8e <orced activated; Co99itted and 5eleted 8y using the sa9e 9enu.

Section ) (odule ) age 1&






1.2 Sotare donload ro9 'Buip9ent $ie








Set the server data N! and )% N! ,'sD

1. +n 'Buip9ent vie; select>“!er'ers .anage.ent///"

2. Select “loal" the local server isauto9atically chosenD

+ HlocalI is not availa8le in the server list; rite HlocalI in the HSotare server na9eI;

close and re-open the indo.








Set the server data )% TL1 ,'sD> 1:/0TSS-!20 R!.1

1. +ssue the co99and “!&ste. 0anage.ent 1nitiali2eand 3%grade 1n4!er'ie 3%grade 3%grade!tat,s" to . a7e sure that the 4pgrade Status is“N#!+A15" .

2. Select “!&ste..anage.ent D60anage.ent

7e.ote *ile 5erfor.8o%& !oftwareDownload" ; and chec7the proposed location.

!. Select the desiredpac7age H5I or 5ataM

H(I or (ergedM HTI orTransportID

,ote that the co99ands and associated 9enus to 8e selected into the eBuip9ent vie

are speciic or each single ,'; so please reer to the Operator 3and8oo7s and to the Training (anuals oeach single ,' a9ily.








Set the server na9e S,( ,'sD

The co99ands and associated 9enus to 8e selected into the eBuip9entvie are speciic or each single ,'; so please reer to the Operator

3and8oo7s and to the Training (anuals o each single ,' a9ily.

Section ) (odule ) age 2!







5onloading N! and )% N! ,'sD

2.Select the SF Release to8e donloaded

1. +n 'Buip9ent vie; select>“1nit download"

ait or the 9essage “!oftwaredownload o.%leted9" to appearin the donload indo.

Section ) (odule ) age 2)







5onloading )% TL1 ,'sD> 1:/0TSS-!20 R!.1

Ater having selected “!&ste..anage.ent D6 0anage.ent 7e.ote *ile 5erfor. 8o%&

!oftware Download" andhaving chosen the desired pac7age;clic7 “A%%l&"

,ote that the co99ands and associated 9enus to 8e selected into the eBuip9ent vie are speciic or

each single ,'; so please reer to the Operator 3and8oo7s and to the Training (anuals o each single,' a9ily.

Section ) (odule ) age 2/







5onloading S,( ,'sD










Activating the ne sotare N! and )% N! ,'sD

1. +n 'Buip9ent vie select the 9enu Download 3nits info///

2. Select the ta8 that corresponds to theStand8y sotare loo7 in CurrentstateAction ieldD +n the Current stateAction pull-don 9enu;

select Ati'ate

!. Clic7 #$ and conir9 ait or N! co99unication to 8e

re-esta8lished it 9ay 8e necessary to restart'(L4S(D

SF Release

Section ) (odule ) age 2"







Activating the ne sotare )% TL1 ,'sD> 1:/0TSS-!20 R!.1

1. ,o it is possi8le to activate the ne sotare release using the>“!&ste. 0anage.ent 1nitiali2e and 3%grade 1nitiali2e

!&ste. -ith New 7elease"/ Ater that the ,' ill restart and ill8e activated the ne sotare release

2. ou can chec7 the SF release donloaded > “E:,i%.ent !&ste.1nfor.ation"

!. Select “!&ste. 0anage.ent 1nitiali2e and 3%grade 1n4 !er'ie 3%grade 7e.o'e #ld 3%grade" 9enu.

,ote that the co99ands and associated 9enus to 8e selected into the eBuip9ent vie are speciic or each

single ,'; so please reer to the Operator 3and8oo7s and to the Training (anuals o each single ,' a9ily.

Section ) (odule ) age 2:







Activating the ne sotare S,( ,'sD



Section ) (odule ) age 2&







5onloading SF to 1:!0SS-!2> rocedure

1. <ro9 the eBuip9ent vie; issue “Ad.inistration !oftware

3%grade"

2. Select “Ation ; A,dit" ; set the correct Release 5irectory and clic7“A%%l&"

!. Select “Ation ; Download" and clic7 “A%%l&"

Once the 5onload has 8een co9pleted chec7 in the HSotare StatusI indoD; the operator can activate the ne release>

1. +n the sa9e indo; Select “Ation ; Ati'ate" and clic7 “A%%l&"

2. The ,' restart. Ater the restart; co99it the ne release 8y selecting“Ation ; 8o..it" and clic7ing “A%%l&"

The activation o the ne sotare can 8e reverted 8y selecting “Ation ;

8o..it" and clic7ing “A%%l&" )efore o..itting the new release

Section ) (odule ) age !0







5onloading SF to 1:!0SS-!2> Sotare 4pgrade Findo

“Ad.inistration

!oftware 3%grade"

Actions to 8e applied

Sotare status 8oP

<T location inor9ation






4 · 4 ·32COR+%3T © ALCAT'L-L4C',T 2012. ALL R+%3TS R'S'R$'5.

Anser the Buestions

Fhat is the advantage o using the <TS Q


1350 oms eml r9.6 o&m tos63017_student guide

Documents