Phone

Fax

+61 3 9544 7188

+61 3 9543 7927

Commercial RdNotting Hill, VIC

MONOBLOC CROSSINGSSmale Rail Monobloc crossings (frogs) are made specifically for tram networks. Based on European designs, these crossings have an extensive record of installations throughout the world.

Made from the same material as the rail, the crossings offer easy weldability without the need for Kirby joints.

High impact areas are hard-faced to your requirements, offering higher levels of hardness for consistent wear patterns over time.

CNC machining provides precise match to wheel profiles and a quiet and smooth transition.

« CNC machined

« Reliable

« Quiet & smooth

« Easy to weld

« Global support

SMALE RAIL

MONOBLOC CROSSINGSSMALE RAIL

Phone

Fax

+61 3 9544 7188

+61 3 9543 7927

Commercial RdNotting Hill, VIC

Technical Information

The common monobloc crossing (or frog) is manufactured from a single block of rolled steel.

The steel used is the same grade and hardness as the materials used to make rails. Consequently, there are no welding issues such as those experienced when welding dissimilar materials (eg. manganese castings).

Each monobloc crossing is CNC machined to match the end profile of the rail before having the legs butt-welded to it.

The entire unit is then precision machined, hard faced then CNC machined again.

Monobloc crossings can be manufactured to suit any intersection and crossing angle and the butt-welded rails can be made to any length required.