12g broadcast connectors

12G Broadcast connectors

www.coax-connectors.com

Delivering 12G in a single punch

for more information visit: www.coax-connectors.comNeed help? Call us today: +44 (0)20 8538 90902 3

COAX CableGroup

Typical Cable Dimensions Typical Cable Typesfor more information visit


EF 0.023”0.58mm

0.102”2.59mm

0.159”4mm Belden 1855A, Belden 1865A, Belden 4855R

FB 0.032”0.81mm

0.145”3.68mm

0.234”5.94mm Belden 1505A, Belden 70081NH

FC 0.04”1.02mm

0.18”4.57mm

0.275”7mm Belden 1694A, Belden 1694F

FI 0.051”1.29mm

0.225”5.72mm

0.32”8.13mm Belden 1794A, Belden 4794R

Cables shown are typical of those that can be used with a COAX connector in a specified ‘Cable Group’The inclusion of any cable above does not necessarily indicate that it is suitable for any specific

application, 12G or otherwise. Please check cable manufacturer specification for suitability.

Testing notesThe above data was derived from the tests carried out on the connector part numbers indicated, and where possible using a cable rated by the manufacturer for 12G use. Where no suitable 12G cable was available, the best performing equivalent was used.

12G BNC Plug return loss

Cables & cable groups

Welcome to COAXCOAX Connectors Ltd is a leading UK designer, manufacturer and supplier of high performance RF connectors.Our products are underpinned by a high level of design expertise and an unfaltering commitment to service and quality. Having gone through a rigorous development process and extensive testing, the refined design of a COAX connector is sure to deliver the reliable and enduring performance your business needs.

The range shown in this short form brochure includes BNC and Micro BNC (HD BNC) that can be used with North American standard crimp tooling. The full range of 75ohm connectors can be found in our ‘Broadcast Catalogue’ or at www.coax-connectors.com.

COAX also offer a wide range of other 50 & 75 ohm RF connectors and cable assemblies, including SMA, SMB, N Type, TNC, MCX etc.

COAX in BroadcastFor many years, COAX Connectors Ltd., have focused on developing RF connector solutions to support the increasing demands of the Broadcast equipment and installer markets.

In this publication we feature our range of 12G BNC and Micro BNC (HD BNC) connectors that are specifically designed to handle 4K, SMPTE ST2082-1 transmissions, these connectors are suitable for a range of cable sizes and are tested to 18GHz, see chart opposite.

Korus BNCThe ‘KORUS’ 12G BNC range have distinctive black coupling nuts together with gold plated inner and outer contacts. ‘KORUS’ connectors can be used to easily distinguish new 12G circuits from the existing infrastructure.

Micro BNC (HD BNC)As equipment footprints reduce, the Micro BNC range has been developed to meet the demand for smaller 75ohm RF connectors that save space, yet still provide low loss transmission at high broadcast frequencies. Micro BNC, in certain parts of the industry, is referred to as HD BNC and both are fully compatible and intermateable. The Micro BNC from COAX has a unique and patented coupling nut that is extended at the back to make handling easier in confined spaces, United States Patent No.9,071.013 applies.

Conductor JacketInsulation

-60

-50

-40

-30

-20

-10

0

1.5GHz 3GHz 6GHz 12GHz 18GHz

10-005-W66-FA1 10-005-W66-FB1 10-005-W66-FC1 10-005-W66-FI Typical 3GHz BNC

SMPTE ST 2082-1 Return loss limits shown in red


Part Number Typical Cable Types(for more visit website)

CableGroup

Centre ContactCrimp

Outer ContactCrimp Features

10-005-W126-EF1Belden 1855A Belden 1865A Belden 4855R

EF 0.042”Square(1.07mm)

0.178” Hex(4.52mm)

‘KORUS’ Black Coupling Nut

10-005-W126-FB1 Belden 1505ABelden 70081NH FB 0.042”Square

(1.07mm)0.255”Hex (6.48mm)


10-005-W126-FC1 Belden 1694ABelden 1694F FC 0.042”Square

(1.07mm)0.278”Hex(7.06mm)


10-005-D126-FI Belden 1794A Belden 4794R FI 0.10”Hex

(2.54mm)0.429” Hex(10.9mm) Nickel Coupling Nut

10-005-D126-EF1Belden 1855A Belden 1865A Belden 4855R


0.178” Hex(4.52mm) Nickel Coupling Nut

10-005-D126-FB1 Belden 1505ABelden 70081NH FB 0.042”Square

(1.07mm)0.255”Hex (6.48mm) Nickel Coupling Nut

10-005-D126-FC1 Belden 1694ABelden 1694F FC 0.042”Square

(1.07mm)0.278”Hex(7.06mm) Nickel Coupling Nut


CableGroup

Centre ContactCrimp




0.178” Hex(4.52mm)



(1.07mm)0.255”Hex (6.48mm)



(1.07mm)0.278”Hex(7.06mm)


10-104-D126-EF1Belden 1855A Belden 1865A Belden 4855R


0.178” Hex(4.52mm) Nickel Coupling Nut

10-104-D126-FB1 Belden 1505ABelden 70081NH FB 0.042”Square

(1.07mm)0.255”Hex (6.48mm) Nickel Coupling Nut

10-104-D126-FC1 Belden 1694ABelden 1694F FC 0.042”Square

(1.07mm)0.278”Hex(7.06mm) Nickel Coupling Nut


CableGroup

Centre ContactCrimp




0.178” Hex(4.52mm)

‘KORUS’ Black Insulating bush


(1.07mm)0.255”Hex (6.48mm)



(1.07mm)0.278”Hex(7.06mm)


10-258-B126-EF1Belden 1855A Belden 1865A Belden 4855R


0.178” Hex(4.52mm)

Nickel Plated BodyBlack Insulating bush

10-258-B126-FB1 Belden 1505ABelden 70081NH FB 0.042”Square

(1.07mm)0.255”Hex (6.48mm)


10-258-B126-FC1 Belden 1694ABelden 1694F FC 0.042”Square

(1.07mm)0.278”Hex(7.06mm)


Right angle crimp plugThe 12G BNC plugs are available with either the ‘KORUS’ black coupling nuts or standard nickel.

Straight crimp plugThe 12G BNC plugs are available with either the

‘KORUS’ black coupling nuts or standard nickel.

PCB end launch jack

Part Number Features

10-462-1-D126 - 1.6 Gold plated body with black nickel nut and washer0.623” Board

10-462-1-B126 - 1.6Nickel plated body and hardware

0.623” Board

Straight bulkhead jack insulated

BNC 75 ohm 12G BNC 75 ohm 12G


Part Number Figure Description Interface ArrangementLeft Right Features

10-500-W126 Fig. 1 Straight Adaptor Jack Jack ‘KORUS’ 12GHzGold plated

10-503-2-W126 Fig. 2 Straight BulkheadInsulated Adaptor Jack Jack ‘KORUS’ 12GHz

Gold plated

10-550-W126 Fig. 3 Straight Bulkhead Insulated Adaptor Jack Jack

Push-Fit to panel‘KORUS’ 12GHz see

Gold plated.

Adaptors in a range of configurations for connection within the BNC series. All adaptors have gold plated centre contacts. For connecting BNC to other coaxial connector types, see our range of Inter Series Adaptors.

Figure 1

Micro BNC (HD BNC) Micro BNC (also known as HD BNC) connectors are used extensively in the Broadcast industry as a smaller alternative to the standard BNC connector. Where high performance in a high density package is required, the Micro BNC is the ideal solution. Micro BNC connectors are fully intermateable and interchangeable with other series of HD-BNC/High density BNC.

These Micro BNCs meet the requirements of SMPTE ST 2082-1, for used in 12G UHD-SDI and Ultra HD 4K applications. With a diameter of only 0.31” (7.8mm), mounting density is increased by more than 4 times when compared with a standard BNC. If space allows, the extended coupling nut (US Patent No. 9,071.013) enables the connectors to be mated and unmated without the use of a tool.

Key features: - True 75 ohm - Tested to 18 GHz - Patented coupling nut for easy connection - Meets SMPTE ST 2082-1 for 12G-SDI

Micro BNC (HD BNC)Standard BNC

3.8” (96mm) Square Area

475% more

25 Connectors 144 Connectors0.315” (8mm) Pitch


CableGroup Centre Contact Outer Contact Features

67-005-B66-EF1Belden 1855A Belden 1865A Belden 4855R


0.178” Hex(4.52mm)

67-005-B66-FB1 Belden 1505ABelden 70081NH FB 0.042”Square

(1.07mm)0.255”Hex (6.48mm)

67-005-B66-FC1 Belden 1694ABelden 1694F FC 0.042”Square

(1.07mm)0.278”Hex(7.06mm)

Straight crimp plug

BNC 75 ohm 12G Micro BNC 75 ohm 12G

Figure 3

Figure 2

Adaptors


Figure 1

Figure 2

Figure 1

Part Number Centre Contact

Outer Contact

DimensionA Features

67-476-D66 12.25 Solder Solder 0.490” Figure 1 - 3 Leg + Centre contact 6GHz

67-476-D66-8.3 Solder Solder 0.327” Figure 1 - 3 Leg + Centre contact 6GHz

67-468-D66 Solder Solder 0.094” Figure 2

67-468-1-D66 Solder Solder 0.146” Figure 2 - Centre contact - plated 15µ” gold

67-468-2-D66 Solder Solder 0.079” Figure 2

67-468-3-D66 Solder Solder 0.146” Figure 2

Straight and Right angle PCB jacks

Figure 2

Straight crimp jack


CableGroup Centre Contact Outer Contact

67-054-B66-EF1Belden 1855A Belden 1865ABelden 4855R


0.178” Hex(4.52mm)

67-054-B66-FB1Belden 1505A

Belden 70081NH FB 0.042”Square(1.07mm)

0.255”Hex (6.48mm)

67-054-B66-FC1Belden 1694ABelden 1694F FC 0.042”Square

(1.07mm)0.278”Hex(7.06mm)

PCB push-on plug(without bayonet nut)These PCB plugs do not have the bayonet locking nut fitted so are ideal for board to board applications or for situations where locking is not required.

Part Number Figure Features

67-403-D126 Figure 1 Straight, surface mount, PCB jack

67-409-D126-1.6 Figure 2 End launch, PCB jack, for 0.623” Board

Figure 1

Figure 2

Figure 1

Micro BNC 75 ohm 12G Micro BNC 75 ohm 12G

Figure 2



67-463-D66 1.6Board edge fitting to

0.623” Board12GHz

End launch PCB jack Adaptors


67-863-B36 Return Loss: -30dB @ 3GHz

75 ohm termination This plug device provides a 75 ohm termination for anyunused jack port.

This part has the same rear extended coupling nut (sleeve) used for the plug connectors. The sleeve incorporates a feature that allows it to be connected and disconnected with the standard tool (96-1132) used for cable plugs.

Twin right angle PCB jack Offset & vertical stacked


92-67-468-3 Figure 1

Offset stacked with screw fix to panel. 0.079”PCB legs

92-67-468-2-B126Figure 2

Vertical stacked with bulkhead nut fixing to panel. 0.094” PCB legsFigure 1

Micro BNC 75 ohm 12G Micro BNC 75 ohm 12G

See data sheet for mounting

details

General information and product safety notice.This short form publication contains only limited information on a selected range of products. Information on safety, warranty, handling

and full product details are contained in our catalogues, data sheets, website or can be supplied on request. Failure to observe this information and the operating conditions specified could result in hazardous conditions.

COAX Connectors Limited continuously works to improve their products, therefore products may deviate from the description, technical data and shape as shown in this catalogue and data sheets.

Figure 2

Figure 1


67-503-D126 Bulkhead Jack to Jack with isolated metal threaded bush - Figure 1

67-512-B66 Bulkhead Plug to Jack - without coupling nut on jack, for quick test applications - Figure 2

Figure 2

Figure 1


COAX Connectors Ltd.6-8 Colne Road

TwickenhamMiddlesex TW1 4JR

United Kingdom

t : +44 (0)20 8538 9090f: +44 (0)20 8538 9890

e: [email protected]

March 2017 Edition

No. 96Q13579

No. 92E13579

12g broadcast connectors

Documents