Electropneumatics & Hydraulics (India) Pvt. Ltd.

110T C-Frame Servo Mechanical Press

This servo mechanical press combines the speed and reliability of eccentric drive mechanical presses and the flexibility of hydraulic presses with innovative electric servo technology. The press with a high-torque servo motor in conjunction with the gear train and eccentric link drive transfers motion to the slide, replacing flywheel, clutch and brake used in a conventional mechanical press.

Electropneumatics & Hydraulics (India) Pvt. Ltd. Gat No. 254/255, Kharabe Wadi, Chakan-Talegaon Road, Chakan, Pune 410501, India.Tel. : +91 (0)2135 667500 Fax : +91 (0)2135 667502Email : epchakan@electropneumatics.com Visit at : www.electropneumatics.com

Electropneumatics & Hydraulics (India) Pvt. Ltd.

Machine Features• C-frame construction

•Main slide with 6-point adjustable flat guides having bronze liners

•Defection of frame within 5 minutes

•Automatic (motorised) oil lubrication system for slide/bushes/bearings

•Recirculation type oil lubrication system for gear box with cooling

•Drive for slide by high torque AC servomotor with eccentric link gear drive

•Motorised slide adjustment with slide position display

• Slide counterbalancing by pneumatic cylinders with slide hydraulic overload safety protection

•Adjustable stroke, die height and tonnage of the slide

• Servo motor controlled in velocity and torque modes for speed and tonnage control of the slide

• Stepless programming of the slide for speed, position, acceleration and deceleration allows different slide motion profiles for various critical forming applications with higher part accuracy

• Power saving by regenerative braking during stroke deceleration

•Online capture facility to study the slide speed/position profile

Specifications

110T C-Frame Servo Mechanical Press

Construction C-frame, left-to-right shaft, eccentric link, single point suspension, single action servo mechanical press

Slide forward capacity 110T (at 5 mm above BDC)

Slide drive AC servo motor (through gear box & eccentric link)

Slide stroke (fixed) 145 mm

Throat 340 mm

Shut height (from bolster top) 400 mm (SDAU)

Slide adjustment (motorised) 60 mm

Strokes per minute (no load) 43

Slide size 620 (LR) x 530 (FB) mm

Bolster size 1100 (LR) x 680 (FB) mm

Bolster height from floor 1000 mm

Connected load 32 kW

CNC system Electropneumatics make CNC with MMI (12.1” color LCD touch screen monitor)

Power supply 3 phase AC, 415V ±6%, 50Hz ±3%, 4 wire

Air required At 6 kg/cm2

Bolster deflection Within 0.17 mm/m on full load

Overall dimensions approx. 3200 (L) x 3000 (W) x 4000 (H) mm

Machine weight approx. 15000 kg