11050 w. little york bldg f / houston, texas 77041geminitrades.com/pdf/dyna2010.pdf · 11050 w....

11050 W. Little York Bldg F / Houston, Texas 77041 Phone - +1 (713) 937-6699 / Fax +1 (713) 937-6690

www.dyna-torque.com

Technical SpecificationSingle Head Orbital WelderPipe Size Range : 4” (102mm) to infiniteTravel Speed Range : 0”−200” (5m) / minOscillation Speed Range : 0”−138” (350 cm) / minVertical Movement Range : 2” (51 mm) motorizedHorizontal Movement Range : 2˜ (51mm) motorizedHead Angle Range : 26 deg (13−0−13) motorizedOscillation Dwell Range: 0 to 1 secPosition Measurement Range: 360 deg with 0.1deg precisionWeight: 22 lbs (10Kg)Length: 8.00" (203mm)Width: 8.50" (216mm)Height: 9.00" (229mm)Operating Temperatures: −20 to +45 deg C(Extreme Range: -40 to +55deg C)Clearance Required: 13.8” (350mm)

Position Dependent Welding ParametersArc voltage/powerArc currentWire feed speedOrbital travel speedOscillation speedOscillation widthOscillation dwell timeWelding Head angle

Controlling FeaturesRISC Based MultiprocessorProprietary Real-Time OSReal-Time Welding Data Monitoring & AcquisitionUser Friendly Remote Pendant ControlAbsolute Position MeasurementPosition Dependent Real-Time Parameter ControlAutomated Stick Out ControlAutomated Start/Stop ControlReal-Time Welding DataWelding Powersouce and Wire Feeder Interface

System Highlights

High Deposition RateLow Repair RateLightweight, Compact, Solid and Robust24 Hours Operations - For Every Day Use Ability To Weld All Passes andProcesses With One SystemShort Training Time and FamiliarizationEase of use, Friendly and Flexible DesignGreat Backup and SupportCWS − Complete Welding Services, Equipment, Personnel and Expertise

Technical SpecificationDual Head Orbital WelderPipe Size Range : 6” (152mm) to infiniteTravel Speed Range : 0”−200” (5m) / minOscillation Speed Range : 0”−138” (350 cm) / minVertical Movement Range : 2” (51 mm) motorizedHorizontal Movement Range : 2˜ (51mm) motorizedHead Angle Range : 30 deg (15−0−15) manualOscillation Dwell Range: 0 to 5 secPosition Measurement Range: 360 deg with 0.1deg precisionWeight: 26 lbs (10Kg)Length: 8.00" (203mm)Width: 9.50" (241mm)Height: 10.0" (254mm)Operating Temperatures: −20 to +45 deg C(Extreme Range: -40 to +55deg C)Clearance Required: 13.8” (350mm)


www.dyna-torque.com

Controlling FeaturesRISC Based MultiprocessorProprietary Real-Time OSReal-Time Welding Data Monitoring & AcquisitionUser Friendly Remote Pendant ControlAbsolute Position MeasurementPosition Dependent Real-Time Parameter ControlAutomated Stick Out ControlAutomated Start/Stop ControlReal-Time Welding DataWelding Powersouce and Wire Feeder Interface

Position Dependent Welding ParametersArc voltage/powerArc currentWire feed speedOrbital travel speedOscillation speedOscillation widthOscillation dwell timeWelding Head angle

System HighlightsFully Independent Dual Head ControlHigh Deposition RateLow Repair RateLightweight, Compact, Solid and Robust24 Hours Operations - For Every Day Use Ability To Weld All Passes andProcesses With One SystemShort Training Time and FamiliarizationEase of use, Friendly and Flexible DesignGreat Backup and SupportCWS − Complete Welding Services, Equipment, Personnel and Expertise

LoneStar Dual-Head Welding Unit

PFM 6-14 ODC - O.D. Clamping Pipe Facing MachineLength 72 in 1829 mmWidth 36 in 914 mmHeight 36 in 914 mmWeight 3000 lbs 1364 kg

Dyna Torque's Pipe Facing Machines are he fastest cutting, most versatile and userfriendly machines on the market today.Years of experience and the highest quality components are incorporated into every unit.

Standard Features1. Quickly adjustable from 6" through 14“

2. Repetitive, concise bevels

3. Easily sets up to any bevel configuration (including modified "J“ bevel, any automatic welding bevel and transition bevels)

4. Brush adapters eliminate both internal and external manual buffing, grinding orsanding

PFM 6-14 ODC


www.dyna-torque.com


www.dyna-torque.com

PFM 16-32Length 108 in 2743 mmWidth 55 in 1219 mmHeight 57 in 1448 mmDrive Section 2450 lbs 1110 kg16” – 24” Clamp Section 420 lb 190 kg24” – 32” Clamp Section 840 lb 381 kg

Dyna Torque's Pipe Facing Machines are the fastest cutting, most versatile and userfriendly machines on the market today. Years of experience and the highest quality

components are incorporated into every unit.

Standard Features1. Quickly adjustable from 16" through 36”2. Repetitive, concise bevels 3. Easily sets up to any bevel configuration

(including modified "J“ bevel, any automatic welding bevel and transition bevels)

4. Brush adapters eliminate both internal and external manual buffing, grinding or sanding

PFM 1632

PFM 36 -57 (pipe range 36” – 57”) - optional 24-57 (pipe range 24” – 57”)Length 210 in 2743 mmWidth 70 in 1778 mmHeight 80 in 2032 mmDrive Section 6500 lbs 2948 kg24” – 32” Clamp Section 840 lb 381 kg OPTIONAL CLAMP SECTION36” – 57” Clamp Section 1200 lb 544 kg

Dyna Torque's Pipe Facing Machines are the fastest cutting, most versatile and userfriendly machines on the market today.Years of experience and the highest quality components are incorporated into every unit.

Standard Features

1. Quickly adjustable from 36" through 57“, optional from 24”

2. Repetitive, concise bevels

3. Easily sets up to any bevel configuration (including modified "J“ bevel, any automatic welding bevel and transition bevels)

4. Brush adapters eliminate both internal and external manual buffing, grinding orsanding

PFM 3657 (optional 2457)


www.dyna-torque.com

Electric Hydraulic Power Unit

529 l140 galHydraulic Fluid Capacity

150A150AStart Up Amps

PVM98Main Pump

3/8” maleLoad sense

1” maleReturn

¾” malePressure Out

OptionalSecondary Pump:

56 KW75 hpMotor Horsepower

89A89AFull Load Amps

60Hz60HzFrequency

240/480240/480Voltage

2129 kg3750lbs.Wet Weight

1314 kg2750lbs.Dry Weight

1778 mm70 in.Height

1092 mm48 in.Width

2692 mm106 in.Length

Power Unit Specifications


www.dyna-torque.com

Notes:• VickersTM Hydraulics• Toshiba TM Electric Power Units

Diesel Hydraulic Power Unit

3/8” maleLoad sense

1” maleReturn

¾” malePressure Out

OptionalSecondary Pump:

PVM98Main Pump:

1905 kW75 hpEngine Horsepower

397 l105 galHydraulic Fluid Capacity

397 l105 gal.Diesel Fuel Capacity

2129 kg4700 lbs.Wet Weight

1314 kg2900 lbs.Dry Weight

1778 mm70 in.Height

1092 mm48 in.Width

2692 mm106 in.Length

Power Unit Specifications


www.dyna-torque.com

Notes:• VickersTM Hydraulics• John Deere TM and Deutz TM Diesel Power Units

Dyna Torque's Internal Lineup Clamps are the most versatile and user friendly

clamps on the market today.

Years of experience and the highest quality components are incorporated into

every unit.

Distinguishing Features:

• Available in sizes 6” – 60”

• Clamps 12” – 60” will cover two pipe sizes by use of conversion kits

• Standard clamps are adjustable up to .500 wall thickness; modified

clamps are available for heavier wall pipe.

• Powered travel drive available on models 12” – 60”

• For efficient operation, the compressed air pressure should be

180 – 200 PSi (12.4 – 13.8 Bar) at 40 CFM

• Maximum safe working pressure is 225 PSI (15.5 Bar)

Internal Pneumatic Lineup Clamp


www.dyna-torque.com

IPLC SpecificationsNon Self-Propelled (Pull Type)Available with Copper Backing

16-18

12-14

10

8

6

in

Pipe Size

406-457

324-356

273

219

164

mm

406

318

235

190

139

mm

16

12.5

9.25

7.5

5.5

in

Width

1778

1473

1448

1194

1067

mm

70

58

57

47

42

in

Length

190

102

79

54

44

kg

418

225

175

120

98

lbs

Weight

445

356

267

229

177

mm

17.5

14

10.5

9

7

in

Height

IPLC16-18

IPLC12-14

IPLC10

IPLC6

IPLC6 AWT

Model

IPLC SpecificationsSelf-Propelled (Line Travel)

Available with Copper Backing

1220-1270

1118-1168

1016-1067

914-965

812 - 863

711-762

610-660

508-559

406-457

324-356

273

mm

48-50

44-46

40-42

36-38

32-34

28-30

24-26

20-22

16-18

12-14

10

in

Pipe Size

180

164

144

128

120*

104

115

115

115

90

62

in

Length

4826

4699

3658

2670

3048

2641

2921

2921

2921

2286

1575

mm

48

44

40

36

28*

24

18.5

17

16

12

10

in

Width

1219

1117

1016

914

711

610

469

431

406

305

254

mm

47.5*

45*

41.5

37.5

31*

25.5

20

18.5

17.5

13.5

11.5

in

Height

1206

1143

1054

953

787

648

508

470

445

343

292

mm

3400*

2950*

2480

1750

1500*

1230

925

590

552

355

300

lbs

Weight

1545

1340

1125

794

681

558

420

284

250

161

136

kg

IPLC48-50

IPLC44-46

IPLC40-42

IPLC36-38

IPLC32-34

IPLC28-30

IPLC24-26

IPLC20-22

IPLC16-18

IPLC12-14

IPLC10

Model

Both Non Self-Propelled and Self-Propelled Clamps Require Compressed Air

For sizes 6 through 18 non self-propelled (pull type) require a 25CFM compressor

For sizes 10 through 36 self-propelled clamps require a 40CFM compressorFor sizes 36 through 60 self - propelled clamps require a 90 CFM compressorAll self - propelled clamps have a 25 degree grade capability

Additional Cost FeaturesDual side drive of 35 degree grade Cement mortar lining

compatibilityAdditional reach rod

Vertical operation facilityStainless steel pipe compatibility De-icersStorage skid


www.dyna-torque.com

Onshore and Offshore Pipeline Construction

And many more.

11050 W. Little York Bldg F / Houston, Texas 77041Phone - +1 (713) 937-6699 / Fax +1 (713) 937-6690

www.dyna-torque.com

Conduto – Brazil 2008/9


www.dyna-torque.com

Batam – Indonesia 2009

Europe 2009


www.dyna-torque.com

LoneStar Australia -2008/9

USA Domestic Projects -2008/9


www.dyna-torque.com

Dyna Torque Technologies Inc.General Overview and Corporate Information

Dyna Torque Technologies Inc. (“Dyna Torque”) is a private company incorporated in Houston, Texas, USA. Dyna Torque was formed 1997, recognizing that the pipeline construction industry depends on specialized equipment and service to successfully accomplish its tasks. Dyna Torque has put together a team with extensive experience in engineering, manufacturing, technical support and field service operations.

Dyna Torque’s mission is to design and manufacture innovative, state-of-the-art equipment and team it up with experienced, knowledgeable staff to help our clients accomplish their goals ahead of schedule and under budget.

From their inception, Dyna Torque has provided a full line of internally designed and manufactured pipe facing machines and internal line-up clamps. It also owns an extensive fleet of equipment available for lease covering a wide range of pipe sizes.

In 2001, the LoneStar automated welding system was developed internally. The system is an advanced automated welding system designed to modernize traditional welding techniques and processes by integrating the latest in software development and microprocessor technologies, combined with innovative device design to offer a compelling digital welding solution.

In addition to the equipment offered to the pipeline construction industry, Dyna Torque specializes in expert services related to the welding of pipelines, whether in the form of technical support for its equipment or providing a complete welding solution. Headquartered in Houston, Texas, USA, Dyna Torque Technologies, Inc. has subsidiaries and strategic partners in Australia, Brazil, Croatia, Indonesia, Malaysia and European headquarters in The Netherlands.

It is our ultimate goal to provide and empower our clients with excellent products, services and the best possible welding solution.

With a track record of more than 11 years, Dyna Torque Technologies, Inc.’s reputation is built on reliable products and services, a commitment to accountability and value, and its ability to serve its clients.

For more information, please visit our website at www.dyna-torque.com to see all of our services.

11050 W. Little York Bldg F / Houston, Texas 77041Phone - +1 (713) 937-6699 / Fax +1 (713) 937-6690

www.dyna-torque.com

11050 w. little york bldg f / houston, texas 77041geminitrades.com/pdf/dyna2010.pdf · 11050 w....

Documents