11022009 ipbn test inter working juniper hw
TRANSCRIPT
![Page 1: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/1.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Table of Contents
Table of Contents
1. EtherChannel.....................................................................................................................1
2. Ethernet OAM.....................................................................................................................1
3. OSPF..................................................................................................................................2
4. MGBP L3VPN.....................................................................................................................3
5. MPLS L3VPN.....................................................................................................................4
6. BFD OSPF............................................................................................................................5
7. BFD BGP............................................................................................................................6
8. VRRP for VRF.....................................................................................................................7
9. MPLS TE...............................................................................................................................8
10. MPLS Fast reroute Link Protection...................................................................................9
11. MPLS Fast reroute Node Protection................................................................................10
12. MPLS Fast reroute Hot backup tunnel.............................................................................11
13. MPLS TE constraint.........................................................................................................12
14. Route leak.........................................................................................................................13
15. Martini VPLS..................................................................................................................14
16. Martini L2VPN (VLL)– L2VC Homogenous Connection.................................................15
17. Martini L2VPN (VLL) – L2VC Interworking Connection.................................................16
18. Kompella VPLS...............................................................................................................17
19. Kompella L2VPN Local/Remote Homogenous Connection...........................................18
20. VRF-LITE.........................................................................................................................19
21. QoS..................................................................................................................................20
22. Policy-Forwarding............................................................................................................22
23. Multicast PIM-SM............................................................................................................22
24. Multicast PIM-SSM.........................................................................................................23
25. TACCAS AUTHENTICATION..........................................................................................24
Viettel Telecom
i
![Page 2: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/2.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
1. EtherChannel
Test item Etherchannel for connections between PE router
Networking diagram
Description 1. Config etherchannel for all interfaces have more than one connection with LACP.
2. Load sharing on all physical connections per etherchannel.
3. Can detect and remove down links from etherchannel.
Expected result 1. 1. Same workload on each physical connections in a etherchannel.
2. 2. Time for detecting and removing down link is less than 1s.
Result
2. Ethernet OAM
Test item Ethernet OAM for connections between Routers
Viettel Telecom
1
![Page 3: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/3.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Config Ethernet OAM for all GE interfaces in IPBN.
Expected result 1. Detect link down is less than <100ms.
2. Can run with Etherchannel, interworking between Juniper and Huawei
3. Show command to check working of Ethernet OAM
Result
3. OSPF
Test item OSPF
Viettel Telecom
2
![Page 4: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/4.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Config follow network topology.
Expected result 1. 1. OSPF run correctly between Juniper and Huawei devices.
Result
4. MGBP L3VPN
Test item MBGP VPN Service
Viettel Telecom
3
![Page 5: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/5.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Set up L3VPN for customer from HNI to HCM follow network topology.
2. All of customer's connections is VPN instances.
3. PE HNI and PE HCM routers learn customer routes through RR router with MBGP VPN
Expected result 1. All sites of customer in VPN can send / receive information from others.
2. Can check all VPN instance routings of customer.
3. Juniper and Huawei can interworking well with MBGP VPN
Result
5. MPLS L3VPN
Test item MPLS L3VPN
Viettel Telecom
4
![Page 6: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/6.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Create MPLS L3VPN for customer:
- Connect CE routers of customer to PE routers.
- Use OSPF, RIP, BGP, static route between CE and PE.
- CE3 can connect with CE1 and CE2. But CE1 and CE2 can not connect together (use route-target to control)
Expected result 1. CE and PE can advertise routes well with OSPF, RIP, BGP, Static route
2. Apply policy routing of customers using Route-target
Result
6. BFD OSPF
Test item BFD OSPF to detect failures and recover network that run OSPF.
Viettel Telecom
5
![Page 7: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/7.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Config BFD and set up BFD OSPF session between P router (T1600 and NE5000E).
2. Down a physiscal link and check BFD operations.
Expected result 1. Time for detecting fault and recovering is less than 200ms.
Result
7. BFD BGP
Test item BFD BGP to detect failures and recover network that run BGP.
Viettel Telecom
6
![Page 8: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/8.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Config BFD and set up BFD BGP session between PE and RR router.
2. Down all links of RR and check BFD operations.
Expected result 1. Time for detecting fault and recovering is less than 200ms.
Result
8. VRRP for VRF
Test item VRRP for VRF
Viettel Telecom
7
![Page 9: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/9.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Config VRRP between HCM_NE80 and HCM_MX960_01, HNI_MX960_01 and HNI_MX960_02
2. When Master down, traffic of Customer will go through Slave Router
Expected result 1. Recovery timer when Master down should be less than 1s
2. Huawei and Juniper can interworking well with VRRP for VRF VPN
Result
9. MPLS TE
Test item MPLS TE
Viettel Telecom
8
![Page 10: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/10.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Create 4 tunnels from HCM_MX960_HHT01_01 to HNI_NE80E:
- VoD tunnel: 600Mbps.
- VoIP tunnel: 100 Mbps.
- VPN tunnel: 1500 Mbps.
- VIP VPN tunnel: 600 Mbps.
2. Use MPLS TE, RSVP and CSPF OSPF to create dynamic paths for tunnels.
3. Down some physical links to cause congestion and check for traffic engineering operations.
Expected result 1. Check the working of MPLS TE + RSVP + CSPF OSPF
2. Create dynamic paths and assign enough bandwidth for all tunnels
Result
10. MPLS Fast reroute Link Protection
Test item MPLS TE FRR Link Protection
Viettel Telecom
9
![Page 11: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/11.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Config follow network topology:
- Create Bi-directional VPN tunnel.
- Push traffic of VPN Customer to this tunnel.
2. Down P router HNI_T1600 (or HNI_NE5000) in HNI.
3. Use MPLS FRR Link Protection to keep service (VPN) up.
Expected result 1. Do not lost VPN service.
2. Compare the recovery timer, complexity of Link Protection, Node Pretection, TE hot-standby choose the best solution
3. Check interworking between Huawei and Juniper about MPLS FRR Link Protection
Result
11. MPLS Fast reroute Node Protection
Test item MPLS TE FRR Node Protection
Viettel Telecom
10
![Page 12: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/12.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Config follow network topology:
- Create Bi-directional VPN tunnel.
- Push traffic of VPN Customer to this tunnel.
2. Down P router HNI_T1600 (or in HNI_NE5000)
3. Use MPLS FRR Node Protection to keep service (VPN) up.
Expected result 1. Do not lost VPN service.
2. Compare the recovery timer, complexity of Link Protection, Node Pretection, TE hot-standby choose the best solution
3. Check interworking between Huawei and Juniper about MPLS FRR Node Protection
Result
12. MPLS Fast reroute Hot backup tunnel
Test item MPLS TE FRR Hot backup tunnel
Viettel Telecom
11
![Page 13: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/13.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Config follow network topology:
- Create Bi-directional VPN tunnel.
- Push traffic of VPN Customer to this tunnel.
2. Down P router HNI_T1600 (or HNI_NE5000) in HNI.
3. Use MPLS FRR Hot backup tunnel to keep service (VPN) up.
Expected result 1. Do not lost VPN service.
2. Compare the recovery timer, complexity of Link Protection, Node Pretection, TE hot-standby choose the best solution
3. Check interworking between Huawei and Juniper about MPLS FRR hot backup tunnel
Result
13. MPLS TE constraint
Test item MPLS TE Constraint
Viettel Telecom
12
![Page 14: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/14.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Create 4 tunnels from HCM_MX960_01 to HNI_NE80E:
- VoD tunnel: 600Mbps with affinity is 100.
- VoIP tunnel: 100 Mbps with affinity is 100.
- VPN tunnel: 1500 Mbps with affinity is 1.
- VIP VPN tunnel: 600 Mbps with affinity is 1.
2. Assign affinity value for all connections between HNI and HCM:
- T1600 HNI - T1600 HCM: affinity = 100.
- NE5000E HNI - NE5000E HCM: affinity = 1.
3. Use TE Constraint with bandwidth and affinity atributes
3. Check the path of all tunnels
Expected result 1. Assign enough bandwidth for all tunnels.
2. Paths of tunnel is correct follow TE constraints.
Result
14. Route leak
Test item MPLS TE
Viettel Telecom
13
![Page 15: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/15.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Create VPN NMS for network monitoring servers follow network topology.
2. Routing between VPN NMS routing table and Global routing table.
Expected result 1. NMS Server can connect and monitor with all Routers in IPBN
Result
15. Martini VPLS
Test item Martini VPLS
Viettel Telecom
14
![Page 16: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/16.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Create MPLS VPLS for Customer (4 CE). 4 CE can transmit Layer2 traffic through Service Provider network
2. Using Martini VPLS to provide service for Customer
Expected result 1. VLAN1, VLAN2, VLAN3, VLAN4 of 4 CE can connect together
2. Show command to check the working of Martini VPLS
Result
16. Martini L2VPN (VLL)– L2VC Homogenous Connection
Test item Martini MPLS L2 VPN (VLL) – L2VC Homogenous Connection
Viettel Telecom
15
![Page 17: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/17.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Create MPLS L2VPN for Customer (4 CE). 4 CE can transmit Layer2 traffic through Service Provider network
2. Using Martini L2VPN (VLL)- L2VC to provide service for Customer
Expected result 1. VLAN1, VLAN2, VLAN3, VLAN4 of 4 CE can connect together
2. Show command to check the working of Martini MPLS L2VPN – L2VC
Result
17. Martini L2VPN (VLL) – L2VC Interworking Connection
Test item Martini MPLS L2 VPN (VLL) – L2VC Interworking Connection
Viettel Telecom
16
![Page 18: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/18.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Create MPLS L2VPN for Customer (4 CE). 4 CE can transmit Layer2 traffic through Service Provider network
2. Using Martini L2VPN (VLL) – L2VC to provide service for Customer
Expected result 1. VLAN1, VLAN2, VLAN3, VLAN4 of 4 CE can connect together
2. Show command to check the working of Martini MPLS L2VPN (VLL) – L2VC
Result
18. Kompella VPLS
Test item Kompella VPLS
Viettel Telecom
17
![Page 19: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/19.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Create MPLS VPLS for Customer (4 CE). 4 CE can transmit Layer2 traffic through Service Provider network
2. Using Kompella VPLS to provide service for Customer
Expected result 1. VLAN1, VLAN2, VLAN3, VLAN4 of 4 CE can connect together
2. Show command to check the working of Kompella VPLS
Result
19. Kompella L2VPN Local/Remote Homogenous Connection
Test item Kompella L2VPN Local Homogenous
Viettel Telecom
18
![Page 20: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/20.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Create MPLS L2VPN for Customer (4 CE). 4 CE can transmit Layer2 traffic through Service Provider network
2. Using Kompella L2VPN (VLL) – Local/Remote homogeneous Connection to provide service for Customer
Expected result 1. VLAN1, VLAN2, VLAN3, VLAN4 of 4 CE can connect together
2. Show command to check the working of Kompella L2VPN
Result
20. VRF-LITE
Test item VRF-Lite
Viettel Telecom
19
![Page 21: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/21.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Provide Leased Line Service for Customer using VRF-Lite
2. Using VRRP on PE to redundancy
Expected result 1. Leased Line Customer can use Internet, VoIP, VoD, VPN services
2. VRRP can work well with VRF, and recovery timer when master down is less than 1s
Result
21. QoS
Test item QoS
Viettel Telecom
20
![Page 22: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/22.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Create 4 VRF Internet, VoIP, VoD, VPN for 4 Services of CE
2. CE have 5Mbps connection with PE, using 4 services following QoS policy:
+ VoIP: 512Kbps (highest priority)
+ VoD: 2Mbps (medium priority)
+ VPN: 1Mbps (normal priority)
+ Internet: 1,5Mbps (low priority)
3. Make QoS overall the IPBN based on kind of traffic
Expected result 1. Rate-limit bandwidth between CE and PE
2. End-to-End QoS Policy for customer traffic to guarantee quality of real-time services
Result
Viettel Telecom
21
![Page 23: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/23.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
22. Policy-Forwarding
Test item Policy-forwarding
Networking diagram
Description 1. Create 4 tunnel per PE: VoIP tunnel, VoD tunnel, VPN tunnel, VIP VPN tunnel
2. Customer use 4 service Internet, VoIP, VoD, VPN on per CE
3. Push VoIP traffic to VoIP tunnel, VoD traffic to VoD tunnel, VPN traffic to VPN tunnel
Expected result 1. Traffic can go through bi-directional in the right tunnel based on kind of services
2. Monitor traffic in the tunnel
Result
23. Multicast PIM-SM
Test item Multicast PIM-SM
Viettel Telecom
22
![Page 24: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/24.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Config PIM-SM in IPBN using BSR
2. Transmit multicast traffic through IPBN
Expected result 1. All Multicast Receiver in HCM, HNI, DNG can receive multicast traffic
2. Show command to monitor working of PIM-SM, BSR, RP, IGMP
3. Can choose RP based on Multicast address range
Result
24. Multicast PIM-SSM
Test item PIM-SSM
Viettel Telecom
23
![Page 25: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/25.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Config PIM-SM in IPBN
2. Using PIM-SSM to deny multicast traffic of Untrust Multicast Server
Expected result 1. Untrust Multicast Server can not send multicast traffic throughout IPBN
2. All Multicast receiver in HCM, HNI, DNG can receive multicast traffic from Trust Mulitcast Server
3. Check working of PIM-SSM
Result
25. TACCAS AUTHENTICATION
Test item Taccas authentication
Viettel Telecom
24
![Page 26: 11022009 IPBN Test Inter Working Juniper HW](https://reader036.vdocuments.site/reader036/viewer/2022062618/54f8b8c64a7959303c8b53ad/html5/thumbnails/26.jpg)
Test-Case Interworking Juniper and Huawei in IPBN Viettel Telecom
Networking diagram
Description 1. Using Taccas protocol to authenticate Router for remote access, console access
2. Taccas Server use ACS software of Cisco or another software
Expected result 1. All Huawei, Juniper Router will be authentication, authorization, accounting on Taccas Server
Result
Viettel Telecom
25