11 - 13 june 2019 - africanconstructionexpo.com · required to do the work. i am excited about the...

The MUST-ATTEND show for the built environment

www.africanconstructionexpo.com Organised by:

11 - 13 June 2019 Gallagher Convention Centre, Johannesburg, South Africa

SHOW GUIDE

Co-located events

11th2019

List of contentsWelcome message 3

Event at a glance 5

Floorplans 6-7

A-Z exhibitor listing 6-9

Stakeholder Engagement Forum 11

Training workshops programme 12-13

Prizes and experience giveaways 14

African Smart Cities Summit 17-20

Sponsor listing 22-24

Full exhibitor listing 27-55

Partners listing 57-74

List of contentsWelcome message ................................................................3

Event at a glance ....................................................................5

Floorplans ..............................................................................6-7

A-Z exhibitor listing ..............................................................8

Stakeholder Engagement Forum .................................11

Training workshops programme ........................... 12-14

African Smart Cities Summit ................................... 15-17

Sponsor listing ................................................................21-23

Full exhibitor listing.................................................... 25-48

Partners listing ...............................................................52-63

Our new-generation Excellium Diesel fuel cleans engines, not only improving machine performance, but business performance too. Supported by our fuel service trucks, E-Fuel supply system and secure Total cards, it’s the perfect mix for your operation. The bottom line: our products ensure deadlines are met, loads are delivered, and costs are saved.

Add more than just engine protection to the mix.

910827_Total Construction_210Hx148W.indd 1 2019/05/22 10:34

We are delighted to welcome you to the 2019 edition of the African Construction and Totally Concrete Expo (ACETCE), brought to you by the organisers of The Big 5, one of the largest global construction events.

Over the next three days, we have come together to drive progress in the construction industry and to address core issues such as transformation, compliance, innovation, design and project opportunities across the African continent. The timing for such an event could not be more crucial given the many industry challenges we are weathering at the moment.

ACETCE will afford you an opportunity to connect with new and old peers so that together we can map a positive way forward to make this sector a sustainable one. Over the next three days, you will get to:

• MEET over 200 exhibiting brands showcasing the latest products and solutions to help you deliver projects on time and on budget;

• EXPERIENCE tools and technology in the indoor and outdoor expo;

• ATTEND the free-to-attend workshop programme (consisting of the Architecture Talks, Smart Talks and Contractors’ Corner) which completes your learning experience by providing you with both practical and educational content and the opportunity to gain CPD points;

• DEBATE / ENGAGE in the stakeholder engagement plenary forum, which will paint a vision for Agenda 2063;

• NETWORK with over 9500 professionals from 45 countries;

• WIN prize and experience giveaways worth over R100 000;

As the continent’s largest gathering of construction, cement and concrete industries we trust that you will leave the event with numerous valuable contacts and great ideas which you can implement immediately to advance your business.

Thank you for your participation and enjoy the experience!

Warm regards,

The Executive Mayor of the City of Johannesburg, Cllr Herman Mashaba, welcomes you to the African Construction Expo 2019.

This all-important expo takes place against a backdrop of massive jobs losses, particularly in the construction sector.

As the City of Johannesburg, we are extremely concerned about this state affairs. I am sure you are too.

Immediate, as well as long-term solutions are sought, which is why this expo could not have come at a more opportune moment.

I would like to believe that, beyond the usual business of advertising products and services, at the core of why we are all gathered here, is to answer the question: how do we get South Africa and South Africans, in particular the youth, working again?

We believe we have a solution that may go some way in answering this all-important question.

The City of Joburg has embarked on an ambitious Inner City Rejuvenation Programme, which seeks to turn Johannesburg into a construction site.

So far, 84 buildings have been offered to private developers and we expect to yield 6500 housing units while realising R20 billion in investment.

From this first phase of the project, 11 000 direct jobs will be created.

A further 70 buildings will be released through open tender by September, yielding about 5000 more housing units and realising an additional R15 billion to R20 billion in investment.

Of course, thousands more jobs will be created during and after construction and tons of building material will be required to do the work. I am excited about the positive ripple effect this programme will have on construction companies.

I therefore call on the construction sector to partner with the City of Joburg to get this sector up and running again, and employing more people.

Thank you,

Tracy-Lee BehrPortfolio Director

Cllr Herman MashabaExecutive Mayor– City of Johannesburg

Welcome

www.africanconstructionexpo.com 3

About dmg eventsdmg events is a leading organiser of face-to-face events and a publisher of trade magazines. We aim to keep businesses informed and connect them with relevant communities to create vibrant marketplaces and to accelerate their business across multiple platforms.

dmg events organises more than 80 events across 25 countries, attracting over 350,000 attendees and delegates every year.

www.dmgevents.com

Co-located events sponsors

Thank you to our 2019 sponsors

4 #AfricanConstructionExpo | 11 – 13 June 2019 | Gallagher Convention Centre, Johannesburg

Silver sponsors

Host city

African Smart Cities Summit:Official Mobility Partner

Endorsing ministry

Pumps, Valves & Pipes Africa expo:Sponsor

Bronze sponsors

African Construction and Totally Concrete Expo sponsors


Event at a glance

W WORKSHOP C CONFERENCE N NETWORK

TUESDAY, 11 JUNE 2019 • EXPO TIMES: 10:00 - 18:00

Contractors’ and Transformation Corner (Workshop) 14:00 - 16:00 Hall 4W

Architecture Talks (Workshop) 11:00 - 16:30 Hall 5W

Pumps, Valves and Pipes Africa (Workshop) 11:00 - 15:00 Hall 4W

African Smart Cities Summit (Conference) 09:00 - 16:30 The Grill RoomC

Grand Opening of Expo 10:00 Hall 5 EntranceN

City of Joburg Mayoral Networking Session 10:30 - 12:30 Hall 4N

VIP Tour 10:00 - 10:30 Hall 4 & 5 N

THURSDAY, 13 JUNE 2019 • EXPO TIMES: 10:00 - 16:00



Smart Talks (Workshop) 11:00 - 16:00 Hall 5W

Pumps, Valves and Pipes Africa (Conference) 10:00 - 15:30 Hall 4C

WEDNESDAY, 12 JUNE 2019 • EXPO TIMES: 10:00 - 18:00



Smart Talks (Workshop) 13:00 - 15:00 Hall 5W

NAFBI (Conference) 08:30 - 16:00 The Grill RoomC

Stakeholders Engagement Forum (Conference) 10:30 - 12:00 Hall 4C

Pumps, Valves and Pipes Africa (Conference) 13:00 - 16:30 Hall 4C

Networking Function 16:30 - 18:00 Hall 5N

VIP Tour 12:30 - 13:15 Hall 4/5 & OutdoorN

A - Z exhibitors in the Outdoor Exhibition Area

Parking will be available @R20

Exhibition floorplanOutdoor Exhibition Area


PARKING

PARKING

OO1O09

O10

O11

O12

O13

O14

O16

REGISTRATION

AFRISAM AFRISAM

O24

O27

O29

O68O66

O55O58

O43O40 O41

INDO

OR

EXPO

A

REA

O04 O07

O58 Airport Steel 043 Isuzu Truck Centre 010 Revaro

O68 AKSA Power 055 Liebherr 013 Rock Drill Technologies

009 Brook Kerith 066 Msasa Xypex O16 The Pekay Group

014 Gimi Access 027 PMSA 024 Vermont Sales

004 Groscor Access Solutions 029 PMSA 040 Volvo

Exhibition floorplanIndoor Exhibition Area Halls 4 & 5


.

W W

St

ARCHITECTURE TALKS DMG EVENTS644 650 653 636

REFRESHMENT AREA

552 554 637 632S11 S10 618

621SMART TALKS703 710 709 708 633 625 631

702

608 553 555 603 601S12 S01 627

609

MEETING AREA

533 532 531

705 706 707 634 626

540 552 553 520

509504547 544 542 550 551 521

516 507548

CONFERENCE AREA

P105 P103 P102 P101 P99 P90 528 526

474DEMO

P133 P129 P121

P97 P96 P95 P93 P92 P91 525

518514

CONTRACTORS' CORNER

462 464 466 473 477

478

476P141 P132 P130 P120 P115 P112 P110

460P140 P114 P113

467 469 471 472

458

310

P125 P124

432

448 444 400E055 E054 420

City of Joburg Mayoral Networking Session Stakeholders Engagement Forum

Concrete Breakfast

E053 E052

451 447E012

P147 454

P149 P146 402

P138 456

413

231

328325

348 349326

324

334352

372

358333

354 CITY OF JOBURG

VIP LOUNGE

332

331

330336

314 309 308323321 304312

214 213 218205

220 219222 212

305

319 316

303 302322

240

236244

226 227 228 229 230

208206

120

123

119

MEETING AREA

104 103

SPEAKER LOUNGE

L O A D I N G

B A Y

107

127113 112 109

54m2

114

MEDIA LOUNGE

221217 216 210

224

223

124

215

336 32m2

334 32m2

332 32m2

HALL 5

360

340 338

HALL 4 ENTRANCE / EXIT

ENTRANCE / EXIT TO AUDITORIUM FOYER

EXHIBITOR RESTAURANT

GERMAN PAVILION

TURKISH PAVILION

INDO

OR

EXPO

ARE

A

TURKISH PAVILION

GREEK PAVILIONANPO MOSCOW EXPORT CENTRE PAVILION

364

REFRESHMENTS

REFR

ESH

MEN

TS

ITALIAN PAVILION

A - Z exhibitors in the Indoor Exhibition Area are listed

on the next page.

Dedicated zones

A - Z exhibitors in the Indoor Exhibition AreaHall 4 & 5


609 Advantage Air

Outdoor Afrisam

325 Alchimica

466 Ak Export Import Insaat Malzemeleri Dis Tic. San. Ve Tic. Ltd. Sti.

352 Aks Lining

P129 Anhui Tongfa Equipment Co., Ltd

405–413 Anpo Moscow Export Centre

424 Anpo Moscow Export Centre



360 Ashak

203 Aspasa

210 Bbf Safety

509 BIM Academy Africa

120 Bossang

528 Bulbuloglu Vinc. San. Ve Tic. A.S.

114 Carmix

314 Carst And Walker

208 CemteQ

708 Chemitop

P132 CHENGDU YONGYI PUMP INDUSTRY CO., LTD

127 Chryso

109 City Of Johannesburg

223 Concrete Manufacturers Association

930 Construction Computer Software

348 Credit Guarantee

804 Crown Publications

P121 DALIAN DEGAO INTERNATIONAL TRADING CO., LTD

330 Databuild

358 Derbigum

310 Diamond Products

525 Duosol Chem Kimya San. Ve Tic. Danismanlik Limited Sirketi

803 Ecasa

471 Elif Prefabrik Yapi San. Tic. Ltd. Sti.

205 Engen Petroleum

226 Eurobend Gmbh

227 Eurobend Sa

472 Fema

518 Framecad South Africa

228 Frank Gmbh

P93 FUJIAN TONGYUE PIPE FITTINGS CO., LTD

632 Gautrain

231 German Pavillion/Iec-Berlin

O04 Goscor Access Rental

637 Graphisoft

467 Guris Is Makinalari Endustri A.S.

E012 Hebei Minhai Pipe Fitting Co. Ltd

324 Hepworth Pme Llc

312 Hira Industries

807 Interact Media Defined

444 Isomat S.A.

P130 JINAN AOWEI MECHANICAL EQUIPMENT CO., LTD

400 Kamaridis Sa

011 Kiloton

236 Knauf

473 Ladin Fair

P140 Laizhou Dongsheng Valve Co.,Ltd

323 Leeasa/Lifting Africa

621 Leica Geosystems

Leonardo Stone

634 Lesotho Stone

055 Liebherr

303 Linknbuild

321 Mactool

338 Mapei

448 Maris Polymers

476 Master Builders North

627 Mbongeni

454 Msasa Xypex

540 Nafbi

349 Namco Guarantees

402 Bauer

336 Nordimpianti

460 Olympic Paints

469 Omega Boya Ve Kimya San. Tic. Ltd. Sti.

631 Ovs Solutions

334 Penetron

107 Pmsa

309 Pratley Marketing

322 Protsurv

123 Rbm

230 Rheinzink Gmbh & Co Kg

319 Rober Kunststoffe Gmbh

328 Roco Group Co Ltd

542 Rubber It

316 Ruthmann Gmbh And Co Kg

364 Sanika Waterproofing Specialists

221 Scam

229 Scancraft Gmbh & Co Kg

305 Sedam Aluminium

458 Shiv Enterprises

478 Shockproof Investments

302 Sika

119 Sipar Srl

240 Sismek

447 Sonne Aktion Ltd

113 Southern Pipeline

420 Specialised Coating Systems

333 Taishan Fibreglass

340 Tal

464 Tensaform Membran Yapilar San. Ve Tic. A.S.

608 Thermguard

P125 TIANJIN SURE INSTRUMENT CO.,LTD

112 Total

244 Vermont Sales

451 Vernilac

224 Vortex Hydra

456 Wall Ties And Forms

212 Wardco Projects

P120 WENZHOU CHISUN VALVE MANUFACTURE CO., LTD.

308 Wireforce

P133 YANGZHOU PIPE FITTING FACTORY CO., LTD

P92 YINGKOU ECONOMIC AND TECHNOLOGY DEVELOPMENT ZONE XINFENG PIPE FITTINGS CO., LTD.

P141 ZHEJIANG DAYUAN PUMPS INDUSTRIAL CO., LTD

P91 zhejiang qiangye pipe fitting Co., Ltd

[email protected] www.dmgevents.com

dmg events is an organiser of international events in diverse industries

including Construction, Energy, Coatings, Transport, Hospitality & Design.

Exhibitors21k 425k

When people meet, ideas spark, connections are made and insights discovered. This is why we truly believe that the personal contact you gain from our events

accelerates business for all of us.

GEOFF DICKINSON, CEO

THROUGH FACE-TO-FACE EVENTS

Stakeholder Engagement Forum programme

Wednesday, 12 June 2019

Stakeholder Engagement Forum

10:30 Opening remarks Aubrey Tshalata, President, National African Federation for the Building Industry (NAFBI)

10:35Ministerial address – How will South Africa’s energy transition address structural inequality and achieve goals towards Agenda 2063? Honourable Minister Jeff Radebe, Minister of Energy, Department of Energy, South Africa

10:45

South African aspirations for Agenda 2063. Leaders in the construction industry inspire action for sustainable development by delivering their blueprint for transforming the country’s built environment, ultimately their compelling vision for the future. Brief presentations include: Chairman: Xolile George, CEO, South Africa Local Government Association (SALGA)/ Member of the Presidential Commission on the Fourth Industrial Revolution

11:00

11:10

11:20

11:30

11:40

11:50

12:00

12:10

Women empowerment in industrial development and engineering – Nobenguni Bogopa, President, South African Institute of Black Property Practitioners (SAIBPP)

Provision of skills for 2063 – targeting unemployment – John Matthews, President, Master Builders South Africa

A better urban future with resilient, sustainable cities– Webster Mfebe, CEO, South African Forum of Civil Engineering Contractors (SAFCEC)

Future economic scenarios based on current trends in the built sector– Rob Jeffrey, Economist, Economic Risk

Investment in alternative building materials and sustainability – Njombo Lucky Lekula, Managing Director, PPC RSA Cement and Materials

Promoting progressive partnerships for sustainable development of SMMEs– Raymond Cele, Chairperson, Construction Education and Training Authority (CETA)

An industry that delivers to globally competitive standards– Nonkululeko Sindane, Chairperson, Construction Industry Development Board (CIDB)

Ensuring high-standard innovative construction systems– Joe Odhiambo, CEO, Agrément, South Africa

12:20 Questions and closing

12:30 VIP exhibition tour


Featured speakersHonorable Jeff Radebe Minister of Energy, Department of Energy,South Africa

Nobenguni Nonkululeko Bogopa President, South African Institute of Black Property Practitioners, South Africa

John Matthews President, Master Builders, South Africa

Workshop training programme


Free

to atte

nd

TUESDAY, 11 JUNE 2019

Architecture Talks

11:00 - 16:30 Hall 5

African Smart Cities Summit

09:00 - 16:30 The Grill Room

09:00

10:00

11:00

12:00

13:00

14:00

15:00

National Building Regulations & SANS revisions - what to expect Videsh Boodu, Vice President, South African Institute of Building Design (SAIBD)

Architectural Profession Act and the rules of professional conduct Kgaogelo Mashile, Legal and Compliance Officer, South African Council for the Architectural Profession (SACAP)

N/A

N/A

N/A

N/A

Please view the programme on page 15

The introduction of Energy Performance Certificates (EPCs) and their impact on specification and constructionStephen Wise, Programme and Product Development Manager, Knauf Insulation

Using TRUSS4 software for structural engineering to design, provide quotes and to fabricate Trusses more efficientlyMatthew McCathie, Head of Sales/Marketing, Shock Proof Investments

Promoting social and economic objectives through procurement for an inclusive built environment professionDhanashwar Basdew, Representative, South African Institute of Building Design (SAIBD)

SABS LSD capacity, infrastructure and Customer Specific Requirements (CSR) - formally known as partial testingErich Seeger, Senior Manager: Civil Engineering and Johan Louw, Executive: LSD, South African Bureau of Standards (SABS)

The IHS Engineering Workbench Solution for Standards Management Justin Hoffmann, General Manager, Bateman Watling & Associates

Pipeline corrosion protection - choosing the best coatingVanessa Sealy-Fisher, Director, Isinyithi

Selection criteria for critical API 610 process pumpsBhekinkosi Gumede, Machinery Engineer: Cape Town Refinery, Chevron South Africa

How concrete that fail the tests win a court case – what to look out for when dealing with the specification, testing and disputing of ready-mixed concreteJacques Smith, Managing Member, Go Consult

Construction Guarantees – what are the requirements for contractors?Trevor Donga, Chief Executive, NAMCO Guarantees

Contractors’ and Transformation Corner

14:00 - 16:00Hall 4

Pumps, Valves & Pipes Africa

11:00 - 15:00Hall 4

Hosted by

CPD Accredited by

Hosted by Hosted by

Hosted by

Hosted by Hosted by

Hosted by

Sponsored by

Hosted by

Workshop training programme


Free to attend

WEDNESDAY, 12 JUNE 2019

Smart Talks (Digital Construction)

Stakeholder Engagement Forum

13:00 - 15:00Hall 5

10h30-12h00 • Estate Restaurant

13:00

14:00

15:00

Complete system solutions from the experts in suspended ceilings - all from a single source!Roland Klaus, Regional Sales Manager, Knauf AMF

Design with HERADESIGN Acoustic Wool Panels for proper sound absorption and room acoustics Klaus Nageler, Product Manager: Heradesign, Knauf AMF, Austria

Lightweight insulating concrete with thermal and acoustic characteristics – a smarter, application-specific variation of standard concrete Victor Bouguenon, Managing Director, CemteQ

How to get started with Building Information Modelling (BIM) in large scale and complex construction projects with a hospital project case studyTomi Henttinen, CIO & Director of R&D and BIM, Gravicon Oy, Finland

An overview of precast concrete in terms of quality and the relation to successful project deliverance Henry Cockcroft, General Manager, Concrete Manufacturers Association (CMA)

Concrete quality essentials Johan van Wyk, Director, South African Readymix Association (SARMA)

SESSION 1.1.1: Pump design, maintenance and operation Chairperson: Bhekinkosi Gumede, Machinery Engineer: Cape Town Refinery, Chevron South Africa

SESSION 1.2.1: CONTROL & AUTOMATION Chairperson: Hamanth Kasan, General Manager, Rand Water

13:00 The use of variable speed control in huge slurry pumping facilities – advantages, disadvantages and cost savings Marchant de Kooker, Electrical / Control & Instrumentation / Systems Engineer, AngloGold Ashanti

13:20 Solar driven pump solutions in irrigation or other applications Hannes van Niekerk, Chief Executive Officer, S A W Africa

13:40 An Eskom pump experience: what did we learn about pumps during the past 25 years? Willem van der Westhuizen, Corporate Specialist: Pump Technology, Eskom

14:00 Session Q&A and Think Tank

15:00 Remote monitoring, control and analysis of pumping systems using 4IR technology Lyon van der Merwe, Product Manager, Franklin Electric SA

15:20 Reducing water losses via Web Based IIOT Technology Petrus Klopper, Professional Services Portfolio Member, Society for Automation, Instrumentation, Measurement and Control (SAIMC)

15:40 Case Study: Using an Advanced Planning & Scheduling (APS) software tool as a replacement to Materials Requirements Planning (MRP) within a valve manufacturing company Lance Zikalala, Managing Director, nCoded Solutions



13:00 - 16:00Hall 4


13:00 - 16:30Hall 4

Hosted by

Hosted by

Hosted by

Hosted by Hosted by

Hosted by

Architecture Talks

13:00 - 16:00 Hall 5

CPD Accredited by

N/A

N/A N/A


Workshop training programmeFree

to atte

nd

THURSDAY, 13 JUNE 2019

Smart Talks (Digital Construction)

11:00 - 16:00Hall 5

10:00

11:00

12:00

13:00

The relevance of CPD including the conditions and validation. SACAP’s and the voluntary associations rolesVidesh Boodu, Vice President, South African Institute of Building Design (SAIBD)

The introduction of EPCs and their impact on specification and constructionStephen Wise, Programme and Product Development Manager, Knauf Insulation

Extending the life of your structures using Concrete Crystalline technologySandor Dowling, Marketing Manager, Sanika

Flooring HTC - Floor preparation and polished concreteAndreas Hasselmose, Sales Manager, Superb Flooring Systems

Smart energy solutions - incorporating solar, energy management, electric vehicle charge and virtual utilitiesKevin Robinson, Sales Consultant, SolarEdge Technologies

Renewable energy and energy efficiency applied intelligenceSenior representative, SPV Engineering

How to get started with the Building Information Modelling (BIM) in large scale and complex construction projects with a hospital project case study Tomi Henttinen, CIO & Director of R&D and BIM, Gravicon Oy, Finland

Understanding building costs Graham Alexander, Head of Tech and Idea Generation, BuildAid

Concrete pumping - Equipment, costing and technical tipsCarlo Garbini and Giovanni Bartoli, Pan Mixers South Africa (PMSA)

Truck safety – truck inspections and legalities around the loading of trucksSenior representative, Isuzu

SESSION 2.1.1: Valves Reconditioning, Quality Control And Operation Chairperson: Andy Camphausen, Member, Valve and Actuator Manufacturers Cluster of South Africa (VAMCOSA) and Public Affairs Officer, Lixil Africa

SESSION 2.2.1: Pipe applications and standards Chairperson: Jacques van Eck, Independent Auditor, Southern African Plastic Pipe Manufacturers Association (SAPPMA)

SESSION 2.3.1: Tanks, vessels and drums Chairperson: Hendrick Rasebopye, Executive Director, Corrosion Institute of South Africa (CorrISA)

10:00 The validity of reconditioning valves Wayne Arnold, Director, Valve Hospital

10:20 High-pressure steam isolation valve replacement Roy Zhou, Technical Engineer, LVSA Group, China

10:40 Operation, maintenance and quality control of valves Julius Frauendorf, Group Technical Manager, AVK Southern Africa


12:00 LSD capacity, SABS commercial as well as certification Erich Seeger, Senior Manager: Civil Engineering; Johan Louw, Executive: LSD and Amanda Gcabashe, Executive: Certification, South African Bureau of Standards (SABS)

12:30 Exploring what is available in the market in terms of high-temperature plastic pressure piping system for hot & cold water applications Ken Patrick, Chairman, Polymer Hot and Cold Technology Association (PHACT)


14:00 Case study of thermophilic digestion instead of aeration that is an energy guzzler Sally Hall, Managing Director, Hyson Cells

14:30 Making financial sense of liquid storage and transport Hein van Spaendonck, Group Director, Flexitank Systems



11:00 - 14:00Hall 4


10:00 - 15:30Hall 4

Hosted by

Hosted by

Hosted by

Hosted by

Hosted by

Hosted by

Hosted by

14:00 Using sandstone in your designs to enhance the appearance of homes and corporate buildings – a showcase of the Lesotho State HouseTosin Bello, Marketing Lead, Lesotho Stone

Hosted by

15:00 Topic to be advisedSenior representative, Carst & Walker

Smart solutions to monitor the strength and temperature of early-age concrete in real timeMatthew Denton, Channel Manager: EMEA & Asia, Giatec

Hosted by

Architecture Talks

10:00 - 16:00 Hall 5

CPD Accredited by

N/A

N/A

N/A

N/A

Safety & risk assessments John Higgs, Board Member and Mentor and Lindombuso Zwane, Route Sheq Officer/Safety Officer, National African Federation for the Building Industry (NAFBI) and Mark Pillay, Mentor, Group 5

Hosted by


Urban population in Africa was reported to be the fastest growing globally and by 2030 Africa will host 6 of the world’s 41 megacities.

Africa’s remarkable urban growth creates major challenges around city infrastructure and service delivery but at the same time provides an abundance of opportunities for both public and private sector players to explore and reinvent urban living in the smartest ways possible.

Welcome to the 3rd annual African Smart Cities Summit, produced by dmg events. Today you will hear key insights into what is being done right now to ensure our future cities are resilient, connected, inclusive, safe, prosperous and smart. You will learn from smart and sustainable project updates from across Africa and explore trends in urban resilience, smarter transportation and better energy management. You will discover how future cities will be connected, intelligent and inclusive through technological innovation such as 5G, IoT and Blockchain.

Thank you for joining us, I promise you will learn and gain tremendous value from attending whilst networking with your fellow industry professionals.

Daniel ClaassenProgramme DirectorAfrican Smart Cities Summit

Taking African Smart Cities from Dream to Reality.

Media Partners

Association Partners

Official Mobility Partner Knowledge Partners Accredited by

ECAELECTRICAL CONTRACTORS’ ASSOCIATION (SA)

HOME OF

YOUR TRUSTED ELECTRICAL CONTRACTORS

11 June 2019 | The Gallagher Grill


CONFERENCE PROGRAMMETUESDAY 11 JUNE 2019

Session 1: Keynote session

Session 2: Smart and sustainable city spotlights

09:00 Welcome from the organisers Daniel Claassen, Programme Director, dmg events

09:20 Keynote Address from Host City Cyril Baloyi, Group Chief Technology Officer, City of Johannesburg

09:40 A Smart City starts with a digital roadmap? Vaughan Harris, President, BIM Institute

10:00 Panel discussion: Taking African Smart Cities from dream to reality• What socio-economic objectives are at play and how are Smart City projects aligned to this?• How can smarter cities alleviate African urban challenges?• Public and private sector co-operation to support smart city transition

Moderator: Sharoda Rapeti, Partner: Delta Partners

Panelists: • Lawrence Boya, Director: Smart City Programme, City of Johannesburg• Juanita Clark, Chief Executive Officer, FTTX Council Africa• Tshepo Kgobe, Senior Executive, Gautrain Management Agency• Martine Mtonga, Deputy Secretary to the Cabinet and National Co-ordinator, Electronic

Government Division - Smart Zambia

10:45 Networking coffee break

A series of practical case studies from local and international city initiatives and where we stand in leveraging proven smart city solutions in Africa.

Chairman: Duncan Bonnett, Director, Africa House

11:00 Five major Smart City trends in Africa Jon Williams, City and Urbanisation Leader, PwC

11:20 Ntshongweni, KwaZulu-Natal: Creating a living, working urban node Erky Wood, Director, GAPP Architects & Urban Designers

11:40 Getting smarter with sustainable neighborhood and building developments Marloes Reinink, Founder and Sustainable Building Consultant, Solid Green

12:00 City of Joburg Smart City spotlight Lawrence Boya, Director: Smart City Programme, City of Johannesburg

12:20 Smart Mauritius: Opportunities, challenges and lessons learnt Tony Lee Luen Len, Partner, Ecosis Ltd, Mauritius

12:40 Implementation of Smart City solutions in Zambia Martine Mtonga, Deputy Secretary to the Cabinet and National Co-ordinator, Electronic Government Division - Smart Zambia

13:00 Lunch


CONFERENCE PROGRAMMETUESDAY 11 JUNE 2019

Session 3: Enabling resilient cities

Session 4: Connected, intelligent and inclusive cities

Chairman: Duncan Bonnett, Director, Africa House

14:00 Trends in Urban Resilience Grahame Cruickshanks, Managing Executive: Market Engagement, Green Building Council of South Africa

14:20 Transport infrastructure as a catalyst in developing smart nodes and cities of the future Tshepo Kgobe, Senior Executive, Gautrain Management Agency

14:40 Microgrids and the future of energy management in cities Sebastian Granow, Head of Location Management Africa, Siemens

15:00 Tshimologong Precinct: Innovative technology, blockchain and Smart Cities solutions Lesley Williams, Chief Executive Officer, Tshimologong Precinct

15:20 Panel: Connected intelligent and inclusive cities• Connecting the cities of the future: The Role of 5G in realising Smart Cities in Africa• How IoT and smart technology contribute to smarter living and unlock citizen focused

service models• Digital ecosystems and new thinking in smarter infrastructure

Moderator: Juanita Clark, Chief Executive Officer, FTTX Council Africa

Panelists:• Jeremy Gibberd, Architect and Specialist in Built Environment: Gauge • Tony Lee Luen Len, Partner: Ecosis Ltd, Mauritius• Bora Varliyagci, Chief Executive Officer: digitalthings

16:00 End of summit

The Gautrain Rapid Rail Link was the first rapid rail network in Africa. The rail connection comprises two links, one between Tshwane and Johannesburg and the other between OR Tambo International Airport and Sandton. The system offers a fast, convenient, safe and efficient public transport service. It takes 15 minutes to travel from Sandton to OR Tambo International Airport on the Gautrain and 35 minutes from Pretoria in Tshwane to Park Station in Johannesburg. As from the 11 August 2014, the Gautrain’s airport service (Sandton to OR Tambo International Airport) was improved with earlier trains in the mornings and later trains in the evenings.

www.gautrain.co.za

Gautrain Management Agency - Official Mobility Partner

New investment heralds Jozi’s rebirth

Developers have eagerly snapped up the

first 84 buildings released by the City for

development in the inner city, and more

buildings will be put up for tender.

Through word and deed, investors and developers have

declared their readiness to transform the inner city into

a welcoming home for students, small business and

mixed-income households.

The winning bidders came up with viable proposals on

how they would turn illegal taxi ranks into high-rise

buildings, illegal dumping sites into prime land and

hijacked properties into loft apartments.

In a few months, excavators, cranes, bulldozers and

concrete mixers will roll into the inner city to herald an

era of reconstruction. The Executive Mayor Herman

Mashaba says the private sector is ready to pump over

R20 billion to redevelop the inner city.

“We have moved from bold vision to reality. We have

awarded tenders for 24 developments spanning 84

properties which will create thousands of units. We will

have mixed one and two bedroom units with monthly

rental ranging from R900 to R4 500.”

The properties to be developed are in various parts of

the inner city, including Yeoville, Berea, Turffontein,

Doornfontein, Vrederdorp, Fairview and Marshalltown.

According to Mayor Mashaba, the City has earmarked

over 500 buildings for expropriation and redevelopment

and 70 of these will soon be released to the market.

Many of the buildings will be converted into affordable

student accommodation, family units and business

premises.

The mayor has expressed confidence with the caliber

of appointed developers. “We wanted people with a

healthy balance sheet. I’m happy with developers we’ve

appointed.”

The City of Johannesburg Council released 84 properties for

development and has now added more to turn the Inner City into a

construction site and grow the economy by at least 5%.

Show us how you will convert disused buildings into high-quality

offices, retail spaces, low-cost housing and student accommodation.

In return, the City offers you rates and tax breaks, staggered

discounted rental and other incentives.

Buildings are available on long-term lease agreements, with an

option to purchase. once development is complete.

Calling all developers,

entrepreneurs and innovators

Turning the Inner City into a construction site

@CityofJoburg @CityofJoburgZA CityofJoburg

For more information and closing date visit: jhbproperty.co.za

Together, let us create a cleaner and safer Inner City in

which residents and business make a decent living.

#BuildingNewJozi

Sponsor listings

Silver sponsor: CarmixMETALGALANTE S.r.l., which is the only specialised in the manufacture of 4×4 off-road self-loading mobile concrete mixers and ten tons bi-directional dumpers. This unique equipment can be described as ‘self independent mobile batching plant’ that loads (and weighs) all the materials itself (water included), mixes and delivers concrete wherever and whenever required. Thanks to its reliability & versatility, CARMIX is selected for any kind of job site: residential, industrial areas, hotels and resorts, low cost housing, road maintenance, dams, tunnels and remote areas.www.carmixsa.co.za

Silver sponsor: KnaufKnauf is one of the world’s leading manufacturers of building materials with its head office in Germany. The company was founded in 1932 and is still in family ownership. Today, Knauf is one of the world’s leading manufacturers of modern insulation materials, drywall construction systems, plasters and accessories, thermal insulation composite systems, paints, liquid screed, floor systems as well as construction machines and tools. In 2017 the Group posted sales of around 6.5 billion euros and it employed 26,500 people.www.knauf.com

Silver sponsor: PMSAAfrica’s largest manufacturer of concrete brick, block and paving machinery.PMSA are also the leading supplier of a full range of concrete equipment including concrete pumps, planetary and twin-shaft mixers, turbine and counter-current rapid pan mixers, moisture measuring systems, oxide dosing systems, kerb-stone machinery, concrete pipe and cage making machinery, self-loading concrete mixers, mixing and weigh batching plants, concrete ready-mix trucks and a full range of production boards for brick, block and paving making machinery.We manufacture high quality, competitive products designed to meet the requirements of the local and international markets.www.pmsa.com

Silver sponsor: Total SAWelcome to Total South Africa (TSA), a company with global links.Our business is the manufacturing, sales and marketing of a range of petroleum products for the retail, commercial, agricultural and industrial markets.With a portfolio of 530 service stations located throughout South Africa and 50 in the neighboring countries of Namibia, Botswana, Lesotho and Swaziland, TSA is a key player in the Southern African petrochemical market, with products such as jet fuel and liquid petroleum gas, lubricants, grease and all grades diesel and petrol.The company was established in South Africa in 1954, after a Frenchman came to visit and saw a large, well established agricultural industry. Total first entered the market by supplying farmers with lubricants for their machinery. It was in 1956 that Total embarked on the development of a service station network. Today we have a strategically positioned network of service stations along with our Bonjour and La Boutique convenience stores.TSA forms part of a leading multinational French energy company and enjoys a 36,6% share in the Natref Refinery. It has wholly owned subsidiaries in Namibia, Botswana, Lesotho and Swaziland (NBLS).The company has its head office in Johannesburg, 22 strategically placed depots, and two regional sales offices – one in Cape Town and the other in Durban.At Total we aim to attract talented people and consider ourselves a learning organization because we understand that it is people who will drive the company’s growth and strategy.www.total.co.za

Bronze sponsor: A.Shak Construction ChemicalsASHAK Construction Chemicals Pty (Ltd) is a leading manufacturer of construction chemicals for the building industry. We are experts in release agents, non shrink grouts, repair mortars, bonding agents, epoxies, floor hardeners and curing compounds.www.ashak.co.za

Bronze sponsor: AfriSam‘Afri’ refers to our proud African heritage and the sub-Saharan African countries in which we operate. ‘Sam’ comes from the word samente or disamente which means cement in six of South Africa’s official languages. In essence we are all about African Cement. AfriSam is a proud Level 2 Broad Based Black Economic Empowerment (BBBEE) contributor and have a 62.5 percent interest in Tanzania-based and listed Tanga Cement Company Limited.www.afrisam.co.za


Bronze sponsor: AKSA Power GenerationAksa Power Generators as the leading company in the Turkish genset market, with its worldwide exports to more than one hundred countries is placed amongst the largest exporters in Turkey. AKSA having begun its journey with manufacturing in 1984 with its first genset is able to satisfy all the needs and requirements of its customers within its comprehensive range of gasoline diesel, natural gas powered gensets, marine generating set from 1kVA to 3000 kVA, lighting towers and associated equipment. In the manufacturing facilities in Turkey, China, and U.S.A.www.aksapowergen.co.za

Bronze sponsor: Engen PetroleumEngen Petroleum is a South African oil company focusing on the downstream refined petroleum products market and related businesses. The company’s core functions are the refining of crude oil, the marketing of primary refined petroleum products and the provision of convenience services via an extensive retail network.www.engen.co.za

Bronze sponsor: Liebherr-Africa (Pty) LimitedLIEBHERR-AFRICA (PTY) LIMITED is a fully owned subsidiary of the International Liebherr Group, which operates from 94 Companies in 31 countries. Liebherr-Africa has been serving the needs of the local Construction, Civil Engineering and Mining Industries since 1958. Liebherr Africa have various divisions suppling mining, earthmoving, materials handling and construction equipment. One such division, Liebherr Concrete Technology, is well known for the sales and support of Truck Mixers, Concrete Pumps and various stationary and mobile Batching Plants.www.liebherr.com

Bronze sponsor: MactoolMactool is a young, dynamic company and has quickly emerged as a market leader in the supply of quality diamond tools to the construction and stone industries. With its founder identifying a need for a specialized supplier able to offer individual service attention and high-end quality products, Mactool was established in September 2003.Since its inception, followed by dramatic growth, hundreds of satisfied clients have built relationships with the company, making Mactool their supplier of choice in a competitive market.Strong demand and continued expansion has served to increase the scope of the company’s product offering and services annually.www.mactool.co.za

Bronze sponsor: MapeiMapei SA is part of an Italian-based multinational that is a leading manufacturer of chemical and adhesive products for the construction industry. As part of this group, Mapei SA passes numerous benefits onto its client base by having access to knowledgeable technical experts, research capabilities and product specialists. By investing more than 5% of its annual turnover into research & development, Mapei ensures its success is based on quality products, total system solutions and technical support from local and international sources.www.mapei.com

Bronze sponsor: National Home Builders Registration Council (NHBRC) The National Home Builders Registration Council (NHBRC) is a regulator body of the home building industry. Our goal is to assist and protect housing consumers who have been exposed to contractors who deliver housing units of substandard design, workmanship and poor quality material. No matter the size or value of your home building project the NHBRC is here to protect you, the housing consumer.Established in 1998, in accordance with the provisions of The Housing Consumers Protection Measures Act (ActNo. 95 of 1998) the NHBRC’s mandate is to protect the interests of housing consumers and to ensure compliance toregulated building industry standards.www.nhbrc.org.za

Bronze sponsor: Sedam Aluminium & GlassSedam Group of Companies established in 1981, Sedam Group is a leader in providing value-added Aluminium services provider.Our services include Aluminium Composite Panels, Glass, Steel Structure and Construction services to our customers by creating a successful partnership with them throughout the process. Our pledge is to establish lasting relationships with our customers by exceeding their expectations and gaining their trust through exceptional performance by every member of the team.www.sedam.ae

Sponsor listings


Sponsor listings

Bronze sponsor: TALTAL is the leader in tile and construction adhesives with a track record of more than 40 years. TAL specialises in tiling installation materials, tiling tools, building solutions and is renowned for the quality of its products. It is the brand of choice for tiling contractors, architects and specifiers as well as DIY tile installers.TAL products are manufactured in South Africa to suit local climatic conditions. The expertise of TAL’s technical advisory staff is only a phone call away thanks to its national technical advice line. Whether you require product solutions for a fast-tracked tiling installation, have a concrete repair problem on site or are simply installing tiles at home, TAL has the tiling and building solution that will suit your needs and get the job done correctly.www.tal.co.za

Bronze sponsor: WireforceWe manufacture a wide range of wire products to cater for Industrial, construction, agricultural and merchant requirements.Together with our highly skilled and experienced technicians, we can provide consistent quality and fit for purpose wire solutions for all requirements.Our infrastructure allows us the flexibility to accommodate both small and large orders.We endeavour to offer the best quality wire products and deliver a superior service experience to all our customers at a reasonable price.www.wireforce.co.za


@TotallyConcrete #TotallyConcreteExpo


LIKE SHARE COMMENT

DO YOU FOLLOW US?

Journal of the African Cement & Concrete Industry

www.concretetrends.co.za

ConCrete • Cement • ConstruCtion • news • produCts • event highlights • teChnology

stay connected.follow the latest ConCrete trends

To advertise contact Vuyisa Mfobo at [email protected] or call +27 21 700 5510.

Reach oveR 20,000 concRete pRofessionals in afRica.

Exhibitor listings


3D sTile3D sTile – having no analogues in the world innovative Russian composite finishing materials used in architecture and construction on the same conditions and principles as conventional finishing materials, but with 3D and dynamic images, visible to the naked eye, instead of the static 2-dimensional images Types of finishing materials 3D sTile:- wall and floor tiles - mosaic - panel- decors - murals - facade solutionsPossible field of application is the finishing and decoration of architectural objects and constructions, any interiors and facades:- houses and apartments - sports facilities - shopping and business centers - schools, medical institutions - subway stations - city events- other objects of the city infrastructurewww.3dstile.com

3S Media – Booth P1123S Media is a modern media company offering six regular print titles, namely; IMIESA, ReSource, Water and Sanitation Africa, Meetings, The Exhibition Planner and The Meetings and Event Planner and associated websites. Many of these are produced in partnership with professional institutes, whilst the annual publications are produced in partnership with large private and public sector companies and organisations. With a strong social media presence, 3S Media is entrenched in and engaged with its communities. www.3smedia.co.za

ACO – Booth 220The ACO Group is one of the world market leaders in drainage technology. Climate change brings us face to face with challenges to respond to new environmental influences by developing innovative solutions. With its integrated approach, ACO stands for professional drainage, economical cleaning, and the controlled release and reuse of water.We do this by processing polymer concrete, stainless steel, plastic, cast iron and reinforced concrete. Because we make our products in environmentally-compatible processes, and use them creatively, ACO products satisfy up-and-coming demands for technical innovation, economical application, and sustainable construction. www.aco.co.za

Africa Mining Brief – Booth 304African Mining Brief is a bi-monthly magazine for the mining industry, incorporating mining, quarrying, oil exploration and drilling; and other large scale extractive operations aimed at the discovery, extraction, storage, transport, sale and utilisation of Africa’s mineral wealth and resources. The magazine aspires to be the preferred and authoritative resource for the mining sector in Africa by featuring pertinent and topical issues of interest to the industry. www.ambriefonline.com

Afrisam – Outdoor‘Afri’ refers to our proud African heritage and the sub-Saharan African countries in which we operate. ‘Sam’ comes from the word samente or disamente which means cement in six of South Africa’s official languages. In essence we are all about African Cement. AfriSam is a proud Level 2 Broad Based Black Economic Empowerment (BBBEE) contributor and have a 62.5 percent interest in Tanzania-based and listed Tanga Cement Company Limited. www.afrisam.co.za

Airport Steel – Booth 058Airport Steel was established in 1999 with the vision of servicing the industry with steel and steel related products. 20 years later and we are proud to be able to supply most steel items; from raw to finished products. We have a variety of products and services available, to service anyone; from contractors to end users. These include steel sheet cutting and bending; pipe and sheet rolling; plasma cutting; reinforcing; cutting and bending; manufacturing and welding of steel products; carports; shadeports; see-through fencing; palisades; gates; industrial hardware with PPE and safety signs; and additional products made to your specifications. www.airportsteel.co.za

AK EXPORT IMPORT INSAAT MALZEMELERI DIS TIC. SAN. VE TIC. LTD. STI. – Booth 466Established in 2008 AK EXPORT focuses exclusively on the supply of a wide range of steel products to suit the needs of today’s international market.Combining our expertise and services innovatively and effectively gives us the ability to offer our customers a complete solution, whatever the project requirement of all construction materials, wherever in the world. www.akexportcomtr.bloombiz.com

AKS Lining – Booth 352 AKS Lining Systems (Pty) Ltd is one of only a few global manufacturers of HDPE cast-in Corrosion Protection Linings. Our main product, Anchor Knob Sheet (AKS), is a robust liner system designed to protect concrete structures in chemically aggressive environments.AKS’s unique product design ensures that the cast-in lining is firmly embedded into any concrete structure by means of a matrix of anchors (1230/m²). AKS is extruded as a single sheet and the anchors are homogeneously formed during the extrusion process. www.aks.co.za

AKSA Power Generation – Booth 068Aksa Power Generators as the leading company in the Turkish genset market, with its worldwide exports to more than one hundred countries is placed amongst the largest exporters in Turkey. AKSA having begun its journey with manufacturing in 1984 with its first genset is able to satisfy all the needs and requirements of its customers within its comprehensive range of gasoline diesel, natural gas powered gensets, marine generating set from 1kVA to 3000 kVA, lighting towers and associated equipment. In the manufacturing facilities in Turkey, China, and U.S.A. www.aksapowergen.co.za

ALCHIMICA – Booth 325ALCHIMICA Building Chemicals is the leading independent manufacturer in Europe, and among the top 4 global manufacturers of polyurethane waterproofing products.For over 35 years, our mission has been and continues to be, innovation. We create, produce and supply high quality building chemicals that add value to our partners' work and the global building chemicals market. We continuously introduce new technologies to the global market, and carve new paths that create new opportunities for our company and most importantly, for our partners within the construction industry. www.alchimica.com

Al-Munif Pipes – Booth 206Al-Munif Pipes Factories are located in Riyadh where the solid and flexible polyethylene is being produced as high and low density at diameters starting from 10mm to 1600mm with different lengths and pressure ratings as one of the leading factories in the region in producing such big diameters.Besides producing Polyethylene Pipes; we are also producing PP-R pipes and Fittings for hot water applications with capacity of about 2000 ton with diameters starting from 20mm up to 160mm. Moreover; we are also producing uPVC and cPVC pipes and fittings for Potable water, drainage and sewerage network, and electrical and telecommunication networks, in addition to GRP pipes and fittings and Rubber products. Production censorship is done in our laboratories to be sure of specifications compatibility. Our Laboratories has been equipped with all types of necessary systems to do those compatibility tests. The production capacity is estimated with about 42,000 ton per year which is marketed and sold inside and outside Saudi Arabia. www.ALMUNIFPIPES.com

Anhui Tongfa Equipment Co.,ltd. – Booth 129Founded in 1994, Anhui Tongfa Equipment Co., Ltd is the professional manufacturer of the pipeline fast repair equipment in China with 600 employees in R&D and marketing department. www.ahtf.cn

ANPO Moscow Export Centre – Booth413/432We work to promote your ideas and products to world markets. We help build sales channels for you using marketing, financial and consulting tools: from exhibitions to e-commerce, from reflecting your products in our export catalog to accompanying your business contacts around the world, from informing and consulting to promoting insurance and financial support measures Government of Moscow, as well as the services of federal and private guarantee and investment funds. www.moscow-export.com

ART Solar – Booth 707ARTsolar was established in 2010 in Durban, South Africa, and remains one of the pioneers of the South African Photovoltaic (PV) solar panel manufacturing industry. We are 100% locally owned and are currently the only South African PV manufacturer that specialises in high volume production for the Northern Cape PV farms. Our production facility is fully capable of laminating and framing PV modules, with a capacity up to 300MW annually. We also have the facilities to perform complete quality assurance tests on all imported PV modules, this involves complete testing of each and every module in a shipment to ensure that the quality of your investment has not been compromised during shipping or by manufacturing defects. Our business model has further evolved to incorporate the wholesale/retail of PV modules and related equipment directly to specialist installers and general consumers.www.artsolar.net

Ashak – Booth 360ASHAK Construction Chemicals Pty (Ltd) is a leading manufacturer of construction chemicals for the building industry. We are experts in release agents, non shrink grouts, repair mortars, bonding agents, epoxies, floor hardeners and curing compounds.www.ashak.co.za

BAUER – Booth 402BAUER is a leading company in high performance construction chemicals and mortars with more than 50 years of experience. BAUER product range includes: Waterproofing Materials; Tile Adhesives and Grouts; External Insulation Systems, Plasters; Repairing Materials, Additives for Mortars; Industrial Floors, Epoxy Floors. Supported by modern facilities and fully automated production lines at all stages the company is certified for implementing the total Factory Production Control System by the German Notification Body following the requirements of ISO 9001. .www.netbauer.com

Exhibitor listings


Exhibitor listings

BBF Safety – Booth 210BBF Safety Group (BBF) is an integrated workplace safety solutions provider that helps customers create safe working environments. We offer a full portfolio of head-to-toe personal protective equipment (PPE) and workplace safety advisory services that range from auditing and consulting to training.Our company employs more than 1 600 people who operate from five ISO:9001 accredited manufacturing facilities throughout South Africa.Our mission is simple: To keep people safe at work by providing complete workplace safety solutions whilst delivering on industrialisation, transformation and development.www.bbfsafety.co.za

Bim Academy Africa – Booth 509The BIM Institute is driving dramatic improvements by developing the blueprints of the guidelines and requirements of the “Building Information Modelling initiative for Africa,” promoting software and digital processes to strengthening Africa’s built environment. In formulating a set of guidelines to improve digital construction performance – and therefore construction as a whole – the BIM Institute continues to engage with early-adopter countries like the United Kingdom, Australia and Canada, where they have transformed their respective sectors in recent years using these technologies. Valuable lessons should be learnt from the key countries in these initial development phases and it is crucial to translate these into usable steps that take Africa’s unique strengths and challenges into account. Visit BIM Institute at stand 803 in the Digital Construction Zone.www.biminstitute.org.za

Bossong SPA – Booth 120Bossong S.p.A. is certified by Intertek as per the International ISO 9001:2015 standard reffered to design, manufacturing and selling of fixing and strengthening systems for constructions and similar.www.bossong.co.uk

BMI Icopal – Booth 322BMI Coverland and BMI Icopal form part of the BMI Group, the largest manufacturer of flat and pitched roofing and flat roof waterproofing solutions throughout Europe. Applications for BMI Icopal waterproofing bitumen membranes include, but are not limited to exposed flat concrete roofs, roof gardens systems, foundation walls, balconies, tunnels, landfills, dams; pond linings, box gutters, metal roofs, parking decks under asphalt, terraces, lift pits, paved parking areas, patios, insulated roofs, retaining walls, sewage plants, parapet walls, planter boxes. You can now purchase a complete building waterproofing solution from one supplier – BMI Icopal. We offer a standard 10 year waterproofing warranty on all product solutions. With 36 production facilities globally manufacturing with state of the art machinery you’re guaranteed of the highest quality products that are fit for purpose.www.bmigroup.com

Brook Kerith – Booth 332Today’s homes require the use of products that can provide more than just aesthetics, they have to provide benefits. Brook Kerith Civil & Building Projects cc was established in 2008 to take care of all industrial & domestic maintenance. At Brook Kerith we build to client specifications, using only the finest quality of products on the market. Many home designs today call for innovative curves and angles, finding quality building materials that will fulfill these requirements can be challenging, that’s why we provide solutions for the most unique buildings, offering the largest variety of forms to suit every building projectwww.brookkerith.co.za

BuildaidBuildaid has been informing and servicing the residential building industry since 1988, through architectural services, cost estimation services, publishing, training and broadcasting. Buildaid is a specialist in building cost calculations and strives to inform, inspire and educate everyone involved in the residential building industry to assist in creating a more efficient and informed industry.www.buildaid.co.za

BULBULOGLU VINC. SAN. VE TIC. A.S. – Booth 528BVS Cranes has initiated its activities in 1985 in Ankara, and has become one of the leader companies and gained the right position in Turkish Crane Industry with the strength and trust received from its customers. Our industry passion started in a small workshop and in time BVS Cranes became the leader crane manufacturing company in Turkey. And today BVS Cranes has 400 employees , 37.000 square meter indoor area manufacturing facility, headquarter in Ankara, İstanbul, İzmir and Germany Regional Sales and Service offices, Çukurova Service Office, domestic and international dealer network, common after sales service network and cooperation with the world brands related to the crane industry. We are proud of that BVS Cranes are operating in all Turkey and at the same time exporting more than 60 countries in 5 continent at all over the world. BVS Cranes is always following the ”SUPERIOR QUALITY”and”SUPERIOR SERVICE” principles, since our foundation till today. Apart from the appreciation and trust we gained from our thousands of customers, BVS Cranes has the all necessary certification approved by accredited institutions. www.bvs.com.tr


Exhibitor listings


Calpeda Pumps Southern Africa – Booth P138Calpeda Pumps South Africa Pty Ltd is a subsidiary of Calpeda S.p.A, a major water pump manufacturer based in Vicenza, Northern Italy. We will be showing our comprehensive range of pumps manufactured in Stainless Steel, Cast Iron and Bronze including our Subteck range of borehole pumps, all manufactured to the highest European and international standards. Calpeda have their own 40,000 m2 production facility and own their own foundry, supported by state of the art R & D and a new innovation centre. Look out for our new E-Idos pumps and our Ecoline initiative. www.calpeda.co.za

Carmix – Booth 114METALGALANTE S.r.l., which is the only specialised in the manufacture of 4×4 off-road self-loading mobile concrete mixers and ten tons bi-directional dumpers. This unique equipment can be described as ‘self independent mobile batching plant’ that loads (and weighs) all the materials itself (water included), mixes and delivers concrete wherever and whenever required. Thanks to its reliability & versatility, CARMIX is selected for any kind of job site: residential, industrial areas, hotels and resorts, low cost housing, road maintenance, dams, tunnels and remote areas. www.carmixsa.co.za

Carst and Walker – Booth 314Carst & Walker (South Africa) has established itself as a significant agent and distributor of raw materials and technical support for a wide variety of industries. Adhesives & Coatings Division; Food Division;Consumer Specialities; Polymers Division; Chemicals Division. www.carst.co.za

CemteQ – Booth 208CemteQ will be displaying its range of value-adding, sustainable cementitious products and systems that are lightweight and offer significant thermal insulation, fire-resistance and acoustic advantages over conventional building materials. The company specialises in developing, manufacturing and distributing high quality perlite- or polystyrene-based bespoke cementitious blends for concrete, wall plaster, floor and roof screeds, cavity fill and decorative applications. In a joint venture with Sanjo Fabtech Sterling, CemteQ now also offers its SanteQ lightweight walling system that weighs 600-700kg/m3, is quick and efficient to erect and offers exceptional acoustic, fire-resistance and thermal insulation properties. See us at stand 208. www.cemteq.com

Chemitop – Booth 708Manufacturing at Chemitop belongs to Product Ready, a functional unit where we strive for innovation and improvement to supply our customers with quality products in regulatory compliance, with reliable delivery and at competitive cost. Our ISO 9001 production facilities and offices on three continents adhere to corporate values of Quality, Integrity, Diversity and Responsibility to create the best experience for our customers. Our mission is to become a multinational company that provides an one-stop solution to bonding, filling and sealing applications. www.chemitop.co.za

Chengdu Yongyi pump Industry Co.,ltd. – booth P132YONGYI PUMP SPECIALIZING IN CORROSION-RESISTANT & WEAR-RESISTANT PUMPS AND AGITATORS FOR MORE THAN 20 YEARS, LOCATED IN QINGBAIJIANG INDUSTRIAL CONCENTRATED DEVELOPMENT ZONE. THE COMPANY HAS OBTAINED ISO9001: 2015 QUALITY SYSTEM CERTIFICATION.www.cdyongyi.com

Chryso Southern Africa (Pty) Ltd – Booth 127The CHRYSO Southern Africa Group encompasses a.b.e. Construction Chemicals and CHRYSO Southern Africa. While a.b.e. Construction Chemicals manufactures and sells products for general construction, concrete repair, flooring and waterproofing as well as silicones, sealants, specialised adhesives and polyurea systems; CHRYSO Southern Africa manufactures and sells admixtures and cement additives that service the mining, readymix, precast, new construction and cement industries. The CHRYSO Southern Africa Group has a large local footprint comprising of five manufacturing plants and 11 branches; with distributors throughout Africa. Part of a global company, the CHRYSO Southern Africa Group is one of twenty-two subsidiaries. www.za.chryso.com

City of Johannesburg – Booth 109The City of Johannesburg’s Group Communication & Marketing Department provides communication leadership to drive service delivery, development and raise awareness of the City’s priorities. By effectively leveraging all key communication platforms, Group Communication and Marketing aims to empower Joburg residents and position the City in a positive light. The department also strives to build collaborative relationships with existing and new business partners in the communication ecosystem, ensuring that together we best meet the imperatives and needs of the people and communication goals of the City of Johannesburg. www.joburg.org.za

Exhibitor listings


Concrete Manufacturers Association – Booth 223The Concrete Manufacturers Association (CMA) is the primary representative of the precast concrete industry. Now in its 46thyear, it initiates standards in close cooperation with StanSA and collaborates with its members in developing new products and services. Precast concrete is a building material which slots very comfortably into the modern world of fast track and modular construction, in many instances leading the way with innovative technologies and applications.The CMA’s promotional activities target architects, engineers, developers, contractors and property owners and the pooled knowledge and expertise of its members fosters an environment which encourages the development of innovative, environmentally and community-friendly products.www.cma.org.za

Concrete Trends – Booth 548Concrete Trends provides a medium that portrays the very best in concrete, showing many examples of the creative use of this unique construction material. The journal aims to stimulate a more imaginative and innovative approach to its use in many applications. The focus is largely Southern African, although significant projects involving concrete in other parts of the world are also featured.Concrete Trends is a business-to-business journal which aims to present all material in a balanced and impartial manner and to offer readers exclusive articles and project reports. Because of its very specific focus – concrete – the journal does not publish subject features, but tries to include articles on all aspects of concrete in each issue. www.concrete.tv/concrete-trends-magazine

Conchem – Booth 521CONCHEM CONSTRUCTION CHEMICALS is a highly successful construction solution supply company based in KwaZulu-Natal & Eastern Cape. With 4 offices: Durban, Richards Bay, Newcastle and East London, we set out to service the construction industry effectively. We aim to provide the best quality product to suite the relative need, assisting with the process from consulting with the professional to working with the contractor providing a turnkey solution. www.con-chem.com

Construction Computer Software – Booth 516CCS provides dedicated projects and cost management software solutions to the Construction and Engineering industries. All CCS products are designed with the help of experienced construction industry professionals which means they are built with a deeps understanding of the industry and the problems that typically occur. Candy and BuildSmart provide a seamless solution from first estimate to final accounts with real time cost reporting. Used together, BuildSmart ERP Operations, Cost Management and Accounts, and Candy Estimating and Project Management tie the financial processes to the physical processes of your enterprise construction and engineering projectswww.constructioncomputersoftware.com

The Corrosion Institute of South Africa – P96The Corrosion Institute of South Africa (CorrISA) exists to serve a broad spectrum of stakeholders with an interest in controlling the impact of corrosion on asset lifecycles, productivity and human life. These anti-corrosion experts ensure that legacies are preserved, economic imperatives are achieved and that human lives are enriched and safeguarded in the process. www.corrosioninstitute.org.za

CIN Protective Coatings SA (PTY) Ltd. – Booth 627Est. 1917 and market leader in the Iberian Peninsula since 1995. A Top 20 European coatings company. We specialise in the manufacture and supply heavy duty or specialized epoxy and polyurethane coatings systems. Operating mainly in the petrochemical, infrastructure, energy, metal and concrete construction sectors, CIN Protective Coatings supplied projects in Portugal, Spain, Europe, Middle East, Africa and Latin America. Our commitment to the research and development of innovative products and formulations of our coatings makes us an extremely competitive group. Protective Coatings SA (PTY) Ltd. www.cincoatings.com

Credit Guarantee – Booth 348As a specialist domestic and trade credit export insurer, Credit Guarantee provides your business with the ability to grow sales. We provide protection against non-payment, export cover against unforeseen circumstances, the opportunity to raise additional working capital and bonds and surety.Our unique strength lies in the ability to secure vast stores of information and market intelligence from a network of contacts, and to interpret data to support our clients businesses – in both local and international markets. Simply insure your debtor’s payment risk with Credit Guarantee – a leading South African Financial Services provider, and safeguard your business’ growth.www.creditguarantee.co.za

Exhibitor listings


Crown Publications – Booth 625Crown Publications, one of South Africa’s largest business-to-business publishing houses, came into existence in 1986. Since then, the company has grown from producing a single magazine, Electricity SA (renamed Electricity+Control), to publishing six monthly magazines, three quarterlies, and a number engineering handbooks.Crown Publication’s dynamic team of qualified staff and informed editors understands the challenges of meeting the ever-changing requirements of businesses that operate in the technical field. We pride ourselves on ensuring that the information we publish across all our magazines is relevant and credible.Our magazines cover various engineering disciplines with particular emphasis on industrial applications in the chemical, construction, electrical, mechanical and mining fields. They offer a balanced mix of technical and product information, making them an ideal platform for promoting company growth within Africa. www.crown.co.za

Dalian Degao International Trading Co.,ltd. – Booth 121Degao was founded in 2007, our valves manufacturing base located in China. We have more than 11 years’ experience in valves production and international trade services. www.degaovalves.com

Databuild – Booth 330Databuild is a knowledge hub for the construction and related industries and acknowledged as the source of all intelligence required by all stakeholders in the industry. The company supports this expertise with a spectrum of services, including its flagship offering Databuild Online, a dynamic and detailed online database of contacts, projects and tender opportunities available in South Africa and other African countries. Clients have access to reliable and real-time information to proactively and timeously market their products and services to the right industry players and thus increase business opportunities throughout the industry supply chain. www.databuild.co.za

Derbigum – Booth 358Derbigum Manufacturing (Pty) Ltd is a fully South African owned company specialising in the local manufacture of reinforced waterproofing membranes. During the last thirty years of its existence a broad knowledge base has been established specifically with regards to South African climatic conditions. Derbigum and its staff has and will continue to play a pivotal role in the South African construction industry. In order to ensure that high standards are upheld and that fully functional waterproofing systems are installed we only recommend that the Derbigum product is installed by Approved Derbigum Contractors. www.derbigum.co.za

Diamond Products – Booth 310Diamond Products is a specialist in the manufacture, assembly, sales and support of diamond tools and equipment for the construction, glass, quarrying and flooring industries. Based in Jet Park, the company is unique in its ability to assemble and support its product range and is the only diamond tool company in South Africa with laser welding facilities for the manufacture of diamond blades and core drills.www.diamondpc.co.za

DOGUSAN TEKSTIL CADIR BRANDA TURIZM INS. OTOM.SAN. VE TIC. LTD. STI. – Booth 531DOGUSAN TEKSTILE is a leading PVC coated tarpaulin producer in TURKEY.Our factory is located at CERKEZKOY / TEKIRDAG with 90.000 m2 daily capacity of PVC Tarpaulin. Our production width is between 140cm – 340cm. Our production weight is between 400gr/m2 – 1350gr/m2. Standard products has knife coated, phthalate free and glossy surface. Special properties are Lacquered, Digital printable, Blackout, matt, flame retardant, UV, antistatic and antibacterial. We export many countries. If you need PVC Tarpaulin with good quality and good price, fell free to contact with us.www.dogusanbranda.com.tr

DUOSOL CHEM KIMYA SAN. VE TIC. DANISMANLIK LIMITED SIRKETI – Booth 525Duosolchem was founded in 2016 to engage in the production and marketing of speciality chemicals to various industries in Istanbul, Turkey. Supply chemicals for industries such as construction, detergent, polyurethane, textile, paint, wood and automotive; Export our products to more then 15 countries; Giving consultancy service for production technologies and equipment installation for; Polycarboxylate superplasticizers (approved recipes by multi-nationals); Macro-monomers Vpeg, Hpeg, Tpeg, Mpeg for PCE; Concrete Admixtures; Polyurethane Systems (Rigids, Sole, Automotive, Polyesters); Textile Auxiliaries; Research and Development studies are the priority for us to provide better and different solutions to our customers. www.duosolchem.com

Exhibitor listings


ECASA – Booth 477The ECA (SA) is an employers’ organization registered in terms of the Labour Relations Act, and has been representing electrical contractors in South Africa for 60 years. It has in excess of 4000 members who employ between 70% and 80% of the total labour force in the Industry. Approximately 80% of all electrical installations in South Africa are carried out by our members.The Association represents electrical contractors at all levels, and is recognized by the Government, supply authorities, consulting engineers, CSIR, ESKOM and the Association of Municipality Electrical Undertakings as the spokesman for the Industry. The ECA also serves on the SABS Committee responsible for the Code of Practice for the Wiring of Premises. www.ecasa.co.za

Ecorubber – Booth 633Eco Rubber’s mission is to manufacture, apply and distribute waterproofing products and services of the highest quality, technologically advanced and environmentally friendly, backed by superior client service and respect for all people we work with. www.ecorubber.co.za

ELIF PREFABRIK YAPI SAN. TIC. LTD. STI. – Booth 474

Engen Petroleum – Booth 205Engen Petroleum is a South African oil company focusing on the downstream refined petroleum products market and related businesses. The company’s core functions are the refining of crude oil, the marketing of primary refined petroleum products and the provision of convenience services via an extensive retail network. www.engen.co.za

Estima CeramicaThe Estima Ceramica company is an international leading company in the production of porcelain tiles, spreading its products in more than 55 countries with 3 main offices: Rubiera (Italy) , Fullerton California (USA) and Moscow (Russia). The company has it’s own two plants located in Russia with production capacity in excess 15 million square meters of tile annually.Estima Ceramica is well known throughout Europe as one of the leaders in producing and marketing high quality products with the world’s most advanced technologies. At the same time, all products of TM ESTIMA® fully meet the green criteria: both the raw materials used and the final products obtained are ecologically and hygienically safe. For nearly two decades, the Estima Ceramica company is steadily growing in terms of сompany’s size, products manufacturing and Building Solutions offered to the porcelain tile market. The company has a wide assortment of products: both classic fullbody tiles, as well as colorbody glazed collections. Estima has a relevant Project Portfolio, providing product and building solutions for some of the most significant worldwide events such as the Winter Olympic Games 2014 in Sochi and the FIFA World Cup 2018 in Russia. The company works with projects of any complexity: sports facilities, transport infrastructure facilities, projects for facades and interior decoration of buildings, projects using porcelain tile in the interiors of public buildings with high traffic, as well as in the interiors of private premises. The heart of the Estima Ceramica company is it’s employees. Professionals coming from different parts of the world, who bring an incredible value to Estima with their knowledge and their different cultures. www.estima.ru

Eurobend GmbH – Booth 226EUROBEND is involved for more than two decades in the manufacturing of advanced technology machinery. Our spectacular growth has been the result of high standard achievements in the areas of design, production and trade of our products. More specifically, EUROBEND produces fully automated electronically controlled machines for straightening, cutting and bending of all types of steel wire (smooth, deformed, recessed or re-bar) mesh welding machines and mattress making machines.www.eurobend.com

Eurobend SA – Booth 227EUROBEND is involved for more than two decades in the manufacturing of advanced technology machinery. Our spectacular growth has been the result of high standard achievements in the areas of design, production and trade of our products. More specifically, EUROBEND produces fully automated electronically controlled machines for straightening, cutting and bending of all types of steel wire (smooth, deformed, recessed or re-bar) mesh welding machines and mattress making machines.www.eurobend.com

F.R Accessories SRL – Booth 215The company designs and manufactures a wide range of accessories for aluminum fixtures and is on the market among the three most important companies in the sector with a share of turnover intended abroad that exceeds 70%. The FR produces and sells accessories with Ragni signature, a brand on the market for over 30 years. The production consists of a vast range of accessories for aluminum doors and windows, able to satisfy any construction requirement, from the simplest to the most complex. The company boasts a catalog of corners, cremone, double handles, tilt-and-turn door, hinges and glazing corners extremely exhaustive. www.fraccessories.com

Exhibitor listings


Federal Ministry for Economic Affairs and Energy (BMWi) – Booth 237Germany participates with a “German Pavilion” offering a professional brokerage service to help to establish contacts with German companies and comprehensive information on Germany as an important business location. www.african-construction.german-pavilion.com

FEMA – Booth 472FEM has been providing compensation Insurance for workplace injuries and diseases to the construction industry since 1936. FEM currently has in excess of 4500 policyholders on its books and is licensed by Minister of Labour to provide such insurance. This mandatory insurance compensates employees and their dependents following injury or death, arising from occupational accidents, illnesses, or industrial diseases. www.fema.co.za

Framecad South Africa Pty Ltd – Booth 518The FRAMECAD® System is the fastest way to design and build durable steel framed buildings anywhere in the world. The future of cold-formed steel frame design, manufacturing and construction has arrived. With FRAMECAD® technology and building products, you can turn architectural inspiration into engineered and commercial reality much faster and more cost-effectively than ever before. The FRAMECAD® integrated design engineer-and-build solution incorporates the intelligence of FRAMECAD® software and FRAMECAD® innovative manufacturing equipment, complemented by an international building product supply chain providing steel, cladding, lining, flooring, roofing and building hardware. www.framecad.com

Frank GmbH – Booth 228FRANK specialises in the development, production and marketing of pipe systems, valves, fittings, measuring and control technology, semi-finished products, concrete protective liners, geosynthetics and custom-engineered solutions in thermoplastics. To our clients we offer complete system solutions and a flexible all-round service in the areas of gas and water supply, geothermal energy, geosynthetics, wastewater treatment. www.frank-gmbh.de

Fujin Tongyue Pipe Fittings Co.,ltd. – P93WE SPECIALIZES IN PRODUCING COPPER FITTINGS, PLUMBING FITTINGS, HOSPITAL OXYGEN FITITNG, AIR CONDITIONING SPARE PARTS,REFRIGERATION FITTINGS,OUR PRODUCTS EXPORTED TO MANY DIFFERENT COUNTRIES,OEM PRODUCTION IS ACCEPTED WITH US. www.chinafjty.com

G Crystal – Polycarbonate sheets – Booth 204G Crystal Plastic Industries Company S.A.E, specialized in manufacturing & producing semi-finished products of Hollow (Multiwall), Embossed (Crystal & Prismatic) and Solid polycarbonate sheets.Operators have many years of extrusion in order to ensure its high quality as we manufacture using only virgin premium raw materials of all international brands of PC with the availability of all the colors including the treatment of one/both sides with UV. That is why our mission has been always to facilitate quality products manufacturing at a very competitive price. www.gcrystal-pc.com

Gautrain – Booth 632www.gautrain.co.za

German Pavillion / IEC-Berlin – Booth 231www.iecberlin.de

Gimi Access – Booth 014We are an industry leader on the forefront of Universal Access Design for the built environment in South Africa, creating and developing elegant products and technology. We also provide consultation, construction and training services to assist in correct design, thus providing an accessible built environment for the mobility- and visually impaired. SANS 784 approved Tactiles (TGSI’s) in a range of materials, sizes and colours; Accessible street furniture; Accessible bollards; Concrete buffer kerbs;Professionally trained construction teams with a 100% approval success; Professional consultation on correct TGSI layout and design in South Africa; Continued research & development.www.gimiaccess.com

Goscor Access Rental – Booth 004Equipped with a diverse fleet of machines and a passionate and dedicated workforce, Goscor Access Solutions offers unparalleled service in High Access Platform sales, rentals, parts and technical support. Offering the highest diesel and electric scissor lifts on the continent, highest crawler boom lift, and our unique articulated booms with stabilizers; we ensure absolute safety when working at height. Our equipment is state of the art, sourced from only the best suppliers worldwide with brands such as Genie, ATN and Holland Lift! Driven by innovation and agility, Goscor Access Solutions is part of the Bud Group, a diversified business of scale and relevance. We also offer a range of light towers, personnel lifts and material lifts. Please consult the website for details or get in touch with one of our sales specialists. www.goscoraccesssolutions.co.za

Exhibitor listings


Graphisoft – Booth 637GRAPHISOFT ignited the BIM revolution with ARCHICAD, the industry-leading BIM & 3D Architecture software for architects. With GRAPHISOFT ARCHICAD’s Building Information Modelling approach, architects can explore design ideas with full confidence, knowing that every detail is being captured, and all documents are being synchronized. GRAPHISOFT continues to lead the industry with innovative solutions, such as the Revolutionary GRAPHISOFT BIM Server TM, the world’s first Real-Time BIM Collaboration environment.OPEN BIM design collaboration offers intelligent, model-based workflow between members of the extended design team and architects using ARCHICAD, resulting in greater efficiency in the building process. www.archicad.co.za

Gravicon – Booth 514Gravicon Oy (former Studio HEMA, founded 1990) operates as an IT consultant and developer for building industry. We are specialized in Building Information Modeling (BIM) consulting services and solutions.www.gravicon.fi/home_eng

Group of Companies PromStroyKontraktGroup of Companies PromStroyKontrakt is a large industrial and construction that specializes in the design, integration, engineering and technical support from the monolithic construction of buildings and structures of varying complexity, including technology, formwork, reinforcing steel, concrete, insulation, engineering and finishing works. PSK includes three production facilities. The main activity of the company is formwork technologies. Our product portfolio includes almost all types of traditional and special formwork, as well as components and materials, made by modern European manufacturing equipment. Our formwork systems ensure producing smooth surfaces of any shape, complexity and height. We have a wide range of sizes.PSK operates the factory producing high-quality timber beams which are the basis for many formwork systems. High load-bearing capacity of our beams allows large spans that helps to reduce the quantity of beams used. The main advantage of our beam is that it is supplied with plastic caps that helps to protect the beam from damages and prolongs it`s service life. Warranty period is 40 cycles. Flanges of our beam are made of oriented wood. Walls made of high quality wooden plywood.www.psk-holding.ru

GURIS IS MAKINALARI ENDUSTRI A.S. – Booth 467With the Güriş Stationary Concrete Batching Plants, which provide practical and effective solutions for the needs of every level, maximum efficiency is easily reached. They also save time and convert them into earnings by ensuring the correct use of business resources. They are developed in accordance with international standards (DIN norms), working under heavy working and climatic conditions. In this way, without compromising the quality of production, 7/24 working with continuous production solutions can offer. Thanks to extremely easy and practical installations for businesses in all parts of the world; they have become an alternative to quality production, saving on purchasing costs. www.gurisendustri.boz.com.tr

Hebei Minhai Pipe Fitting Co. Ltd – Booth E012Our factory is one of the largest professional manufacturers of seamless steel butt welding pipe fittings in China. We have been in this industry since the 1990s and are CE & ISO certified. We sincerely hope to establish a long-term business relationship with you! www.minhai-pipefittings.com

Hepworth PME LLC – Booth 324Hepworth manufactures and markets integrated piping systems to the civil and building construction sectors. This business was established over 40 years ago in Dubai and now manufactures pipes and fittings on three locations in the UAE and one location in Qatar. In addition, it trades through operating companies in Oman, Bahrain and Saudi Arabia and exports throughout the MENA region.www.hepworth.ae

HIRA Industries – Booth 312Since 1980, Hira Group is into the Manufacturing Products for the Building and Construction Industry.Witnessing the fast pace of development in the 1980, Mr. Ramesh Hira, HVAC Engineer from India, founded Hira Traders LLC in the UAE, with a strategic objective of distributing HVAC utility products in the Middle East. Today the Hira Group, is a pioneer, a leader, which caters to industrial segments across MENA such as HVAC, MEP, Civil Construction, Infrastructure, Aluminium, Glass, Marine, commercial, residential and industrial projects. In the past 3 decades Hira Group has successfully emerged and expanded its activities in trading and customer base in GCC, India, Southeast Asia, Australia and Africa.Hira Group exemplifies the success of a true enterprise starting from the visionary acumen to breaking newer grounds and excelling at every given instance, from the project conception to execution, and proven time and again. Committed to world-class quality and manufacturing. www.rhira.com

Exhibitor listings


Iberosistem – Booth 218Presentation of our new product: fiberglass board with plywood core with average number of uses: 60 to 150 times. Mexican company that manufactures shorings/props & formwork with the world's highest technology. System allows execution of slabs of any type: reticular, solid or lighted, recoverable bucket, unidirectional, at beam. Company systems: columns, slabs, beams, walls, recoverable buckets.Iberosistem designs, develops & innovates continuously, adapting to customer´s needs. 19 years’ experience. Manufacturing processes re carried out by rotated mechanisms with maximum quality standards. www.iberosistem.com

Interact Media Defined – Booth 653/P114Interact Media Defined (IMD) is a specialist B2B multimedia publisher for the trade and technical environment that focusses on mining, HVAC&R, plumbing, affordable housing, timber and plant & equipment sectors. Recognised by our communities as the leading provider of valuable information, we strive to produce products that are world classed. We pride ourselves on being the pioneer of innovative and integrated commercial partnerships backed by our quality original content, and face to face industry participation. www.interactmedia.co.za

ISOMAT S.A. – Booth 444ISOMAT was founded in 1980 and is a producer of building chemicals and mortars with multinational perspective. The company has 3 production plants in Greece, Romania and Serbia, 7 subsidiaries in Germany, Russia, Turkey, Bulgaria, Romania, Serbia and Slovenia, while exports its products to more than 50 countries worldwide. ISOMAT develops its wide range of product solutions in its own R&D laboratories. The company’s product portfolio includes liquid polyurethane, polyurea & crystalline waterproofing systems, tile adhesives & grouts, paints & renders, microcement coatings & varnishes, epoxy floorings, self-leveling coatings, repair mortars, concrete & mortar admixtures.www.isomat.eu

ISTANBUL ELEKTROSTATIK TOZ VE YAS. BOYA MAK. IML. SAN. TIC. LTD. STI. – Booth 526Paint Plants with its experience and expert staff .İstanbul Elektrostatik Makine, under the İESMAK brand, continues its 15 years of professional experience in Manufacturing, Assembly and Application in a 5000m2 indoor area. The products we produce include Powder Coating Furnaces (Tunnel Type, U Type, Overhead Pallet and Box Type), Coating Cabins (Powder and Wet Paint), Spray washing finishing lines, Submersible bath boilers – Submersible type drying ovens, Wooden-pattern transfer coating plants; Conveyor lines, Powder Coating Guns (Corona and Tribo systems). www.iesmak.com.tr

Isuzu Truck Centre – Booth 043The Johannesburg ITC branch is conveniently located in Midrand to service Jozi clientele, Gauteng Isuzu enthusiasts and more. If you're on the lookout for an Isuzu truck dealer who can assist you with everything from initial purchases, to services, parts and the entire after-sales care package in the City of Gold, we should be your first port of call. When you collaborate with our highly trained team of professional sales personnel and skilled technicians, you can rest assured that you will be getting unbeatable service from start to finish. We're here to make your Isuzu journey a rewarding one from the moment you walk through our doors in Midrand, Johannesburg. If there is anything you would like our Pretoria branch to contact you about, please complete the form and we will have them contact you as soon as we can. www.isuzutruck.co.za/find-a-dealer/isuzu-truck-centre-midrand

IQ laser – Booth S10Technical leader in the field of portable 3D measurement, digital scanning and reverse engineeringsolutions in Southern Africa.Founded in 2004, iQlaser was the first company locally to introduce 3Dscanning for large-scale developments such as mines, tunnels or buildings.We supply and service the equipment as well as train your staff.Our engineers specialise in complete system integration inrespect of any 3D measuring application. They are kept up-to- date with the latest technologies by regularly attending courses run by our principals. www.iqlaser.co.za

Jilin Zhongxin Chemical Group Co – Booth 331Jilin Zhongxin Chemical Group Co., Ltd is an international Green Chemical manufacture focus on the polycarboxylate superplasticizers and its raw material production and R&D, sales and technical services and the total annual capacity reaches >300kta and many top multinational companies are our loyal customers for more than 30 countries. We are the top 1 Chinese exporter of polycarboxylate superplasticizers since now and our production line creates the advantage to each client for our competitive cost performance benefits. Our company focus on the sustainable development by taking our corn based ethylene oxide the ethoxylated non-ionic surfactants in personal care and home care industry, we expect to build the bio business with more values with our company responsibility.

Jinan Aowei Mechanical Equipment Co.,ltd. – Booth P130JINAN AOWEI MECHANICAL EQUIPMENT CO., LTD. IS A MANUFACTURER SPECIALIZING IN THE PRODUCTION OF FLANGES AND FORGINGS. FOUNDED IN 1998, THE COMPANY IS LOCATED IN ZHANGQIU, SHANDONG. www.jnaowei.com

Exhibitor listings


Kamaridis Global Wire SA – Booth 400KAMARIDIS GLOBAL WIRE SA is one of the largest polyurethane and PIR and polyurethane foam manufacturing industries and one of the largest and most modern industries in the production of black, galvanized wire, wire mesh and welded mesh in Greece.www.kamaridis.gr

Kia – Booth 372www.kia.co.za

Kiloton – Booth 011Kiloton is the preferred industrial service partner when it comes to supplying the manufacturing, mining and construction industries in Sub Saharan Africa with high-pressure hydraulics, pneumatic’ s, hand and power tools as well as abrasive equipment solutions either directly or through distributor collaborations.As an official importer of Enerpac and a major distributor of Bosch, Chicago Pneumatic, Gedore, Pferd, Somta, Ruwag and Stier you can be rest assured that only quality branded products are being supplied to the you, our customer.www.kiloton.co.za

Knauf – Booth 236Knauf is one of the world’s leading manufacturers of building materials with its head office in Germany. The company was founded in 1932 and is still in family ownership. Today, Knauf is one of the world’s leading manufacturers of modern insulation materials, drywall construction systems, plasters and accessories, thermal insulation composite systems, paints, liquid screed, floor systems as well as construction machines and tools.In 2017 the Group posted sales of around 6.5 billion euros and it employed 26,500 people.www.knauf-insulation.co.za

KREN VINC MAKINA DERI URUNLERI KAVAFIYE INS. SAN. VE TIC. LTD. STI. – Booth 533Founded in early 2007, our company; Konya 1. Organize activities began in the industrial area of 2000 m2 closed area and currently continues to operate in Busan 3 total 4100 m2 of new factory building in Private Organized Industry. As Kran Crane Machinery since 2007, which he developed systems and innovative designs, and provide after-sales that dialogue established with customers who have safely marked the crane industry it serves and it is has a legitimate place. www.krenvinc.com.tr

Ladin Fair– Booth 473Ladin Fair & Congress Organization Services Inc. was founded in 1993 and has maintained its activities with a vision based on a principle of targeting new markets. Ladin, with a long-standing background, which possesses a major portion to increase our country's export, has amalgamated with Expotim Corporate Group. Until today, Ladin has held up successful exhibitions in Iran, Bulgaria, Algeria, Morocco, Yemen, South Africa, Belarus, Pakistan, Greece, Syria and India. Ladin continues to organize exhibition in all over the world. www.ladin.com.tr

Laizhou Dongsheng Valve Co.,ltd. – Booth P140Laizhou dongsheng valve co.,ltd mainly produce all kinds of check valves and diaphragm valve etc for more than 15 years. www.dongshengvalve.com

Lasher – Booth 547For 90 years’ Lasher Tools has been the leading manufacturer and supplier of quality hand tools in the gardening, DIY, agriculture, construction and mining industries in South Africa. Lasher is also the only local manufacturer of over 1,200 hand tools and has an extensive export supply throughout Africa and abroad. At Lasher we continue to build on our passion for quality, innovation and value for money. Tough, Reliable Tools, Guaranteed. www.lasher.co.za

@ConstructionExposSA #AfricanConstructionExpo

@AfriConstruct #AfricanConstructionExpo

LIKE SHARE COMMENT

DO YOU FOLLOW US?

Exhibitor listings


Leeasa – Booth 323The LIFTING EQUIPMENT ENGINEERING ASSOCIATION OF SOUTH AFRICA (LEEASA) was formed by like-minded organisations and concerned industry individuals from the providers, manufacturers, maintenance, inspection, examination and training sectors in 2003. LEEASA is a voluntary association recognised by the Engineering Council of South Africa (ECSA) VA00A48 and has since nominated members to serve on relevant ECSA committees specifically the Lifting Machinery Inspectors (LMI) ECSA registration committee.www.leeasa.co.za

Leica Geosystems – Booth 621Revolutionising the world of measurement and survey for nearly 200 years, Leica Geosystems, part of Hexagon, creates complete solutions for professionals across the planet. Known for premium products and innovative solution development, professionals in diverse mix of industries, such as aerospace and defence, safety and security, construction, and manufacturing, trust Leica Geosystems for all their geospatial needs. With precise and accurate instruments, sophisticated software, and trusted services, Leica Geosystems delivers value every day to those shaping the future of our world.Hexagon is a global leader in digital solutions that create Autonomous Connected Ecosystems. Hexagon has approximately 20,000 employees in 50 countries and net sales of approximately 3.8bn EUR.www.leica-geosystems.com

Leonardo StoneThe company has been producing artificial stone since 2005. By the 10th anniversary of its foundation we launched a new manufacturing complex. And now, after completing all the startup and commissioning (procedures), the new plant has been finally launched. The company is located on the area of 4 hectares and the capacity of the plant allows to produce up to 500,000 square meters of stone per year. In our manufacturing process we use local cement and sand, some raw materials are purchased in Germany. It is safe to say that our production complex is one of the most advanced and technically equipped facilities in Russia. Our mission is to produce a unique and high-quality artificial stone to fill the need of each person in cozy, beautiful space for living, work and creative activities. Why do customers choose us? We always know the exact answer to the question, because: 1. We carefully study the textures of natural stone to create the product with ideal forms and high aesthetic qualities. 2. We use only the best raw materials and materials: quartz and river sand, high-grade cement and silicone molds. 3. We propose the widest color range of artificial stone. 4. We constantly update the range, following the trends in manufacturing and design, annually introducing several new collections.www.cckomplekt.ru/info/brands/leonardo-stoun

Lesotho Stone – Booth 634Lesotho stone is the largest producer of Natural Sandstone Building Products in Southern Africa cut from the finest sandstone resources in the Kingdom of Lesotho. Our specially designed cutting machines offer the most advanced stone mining technology, assuring productivity of over 200,000 square meters of Natural Sandstone, cut and sized annually. Our highly-trained overseas technicians guarantee the best quality sandstone products at favourable and competitive prices. Our Natural Sandstone finishes will enhance the appearance of your home and boost the value of your property. Visit us today! www.lesothostone.co.za

LIEBHERR – Booth O55LIEBHERR-AFRICA (PTY) LIMITED is a fully owned subsidiary of the International Liebherr Group, which operates from 94 Companies in 31 countries. Liebherr-Africa has been serving the needs of the local Construction, Civil Engineering and Mining Industries since 1958. Liebherr Africa have various divisions suppling mining, earthmoving, materials handling and construction equipment. One such division, Liebherr Concrete Technology, is well known for the sales and support of Truck Mixers, Concrete Pumps and various stationary and mobile Batching Plants.www.liebherr.com

Lifting Africa – Booth 323DEDICATED TO OUR LOYAL READERSLifting Africa is dedicated to providing the reader with a platform to discuss and resolve problems and issues relevant to the African lifting industry. Lifting Africa will assist the reader, with compliance to all legal and statutory requirements in the lifting industry. Our aim is to improve safety in the industry.Training is very important to the industry and ourselves. We will, therefore, focus consistently on training. This will include an annual conference covering all aspect relevant to the industry. Focus areas are case studies of previous accidents in the industry, to prevent this from happening in the future.Lifting Africa will also focus on and feature all forms of lifting; from mobile, tower, and construction cranes to overhead, under-hung, monorail, wharf and gantry type container cranes. Lifting Africa will also include features on “under the hook” equipment, lifting tackle and ancillary equipment, repairs, testing, inspection, and training companies.www.liftingafrica.co.za

Exhibitor listings


LinkNBuild – Booth 303LinkNBuild helps boost construction companies to new levels with simple, cutting edge tools and support for contractors of all sizes. We work with JSE listed construction companies and small 15 person painting companies - with everything focused on value to clients. Visit us to see our wireless mobile fingerprint scanners, automated brick counter or hear how Anthony bought a new bakkie for his bricklaying business from only one project using our systems. Come and say hi!www.linknbuild.com

LVSA Group – Booth P90A leading PVF (Pipes, Valves and Fittings) Supplier, Valve Repair and Modification Company. We at LVSA Group continually strive to meet and exceed the needs of our customers, by paying attention to detail and working with clients to thoroughly understand their requirements and offer quality products and superior service. Our organization strives to become a model of success and true potential in the growing Global Market. Our highly-qualified staff and partners together with our ISO 9001:2015 Certified system works tirelessly to meet our planned objectives in order to serve you exclusively. Our strategic partnerships with: TVM, ROMOTAS, and PETREL enables us to have serious engineering and PVF (pipes, valves & fittings) capabilities. We have branches located nationwide. Contact us on: +27 11 680 2005 or [email protected]. www.lvsa.co.za

Mactool – Booth 321Mactool is a young, dynamic company and has quickly emerged as a market leader in the supply of quality diamond tools to the construction and stone industries. With its founder identifying a need for a specialized supplier able to offer individual service attention and high-end quality products, Mactool was established in September 2003. Since its inception, followed by dramatic growth, hundreds of satisfied clients have built relationships with the company, making Mactool their supplier of choice in a competitive market. Strong demand and continued expansion has served to increase the scope of the company’s product offering and services annually. www.mactool.co.za

Mapei – Booth 338MAPEI is a recognised world leader in the production of adhesives, sealants and chemical products for the construction industry worldwide. Currently, the MAPEI group has 81 subsidiaries with production facilities in operation wordwide. The MAPEI group boasts a wide range of products for the construction sector & invests over 5% of its annual turnover into research & development. MAPEI ensures its success globally through quality products, total system solutions and technical support from local and international sources for any market in which they operate. MAPEI South Africa (Pty) Ltd, the local manufacturing subsidiary of the MAPEI group, is based in Germiston with local representation in the coastal regions. www.mapei.com

MARIS POLYMERS – Booth 448Maris Polymers is one of the leading European specialists in polyurethane liquid applied waterproofing products having 30 years’ experience. We carry out international sales to more than 70 countries around the world where it operates either by affiliated companies or through long term cooperation. In order to strengthen our presence in South Africa, we established MARIS POLYMERS SOUTH AFRICA, a partnership with SAFEGUARD CHEMICALS for offering better customer service and technical support. Maris Polymers South Africa is accredited by B-BBEE Level 2.www.marispolymers.com

Master Builders North – Booth 476The Pretoria Master Builders Association was founded in 1903 and the Johannesburg Master Builders Association was founded in 1894 and was formally constituted in 1904. These organisations merged in January 1996 to form the Gauteng Master Builders Association (GMBA). In 2012, the association underwent a name change and is now known as the Master Builders Association North – incorporating the following 4 regions: Gauteng, North West, Mpumalanga and Limpopo.www.mbanorth.co.za

Master Builders South Africa – Booth 300Master Builders South Africa is the leading representative body in the building industry in South Africa. Its primary role is to uphold the viewpoints of its members and the industry, to promote the highest quality and standards through best business practice, and to establish and maintain strategic relationships with Government and other legislative bodies to create a sustainable business environment.www.masterbuilders.org.za

Exhibitor listings


Mbongeni – Booth 627Founded in 2010, Mbongeni is a construction management and general contracting company specializing in corporate building improvements. Based in Gauteng our foundation is built on trust, reliability and commitment to quality. We guarantee effective planning and coordination along with confident team leadership to maintain communication throughout all stages of construction.Our aim To acquire, plan, execute and monitor projects in property maintenance and improvements.Our Services - Project Management - Health & Safety - Pre-Construction Consulting - Concept design - Space planning - Construction Management - General Contracting - Service Work - Budgets, Estimates & Schedules - Site Assessment - Quality Controlwww.mbongeni.co.za

MEGABOARDInsulation products manufacturing Turkey’s innovative brand MEGABOARD 42,000 m2 indoor, serves 116,000 m2 of production space totaling 158,000 m2 of open space. MEGABOARD brand in the construction and insulation sector has reached a respectable, reliable and strong brand image, thanks to the current state; 40,000 tons / year Rockwool, 200,000 m3 / year XPS, 350,000 m3 / year EPS production in terms of insulation products range and production capacity is one of the most important players in the industry. www.megaboard.com.tr/

MGSUMGSU is a leading civil engineering university in the Russian Federation. MGSU is a modern research and educational center with the long-standing academic and scientific traditions; and it is actively involving in the professional and intellectual potential development of Russia. Our university has created and implemented innovative organization technologies of the educational and scientific activity to train modern engineering personnel, scientists and experts, to establish the high-tech products and transfer new technologies in the construction field, which exists as one of the most important branches of the human activity. NRU MGSU ensures effective participation in the implementation of promising interdisciplinary research projects in priority areas of science and technology development in the Russian Federation, the development of cooperation with leading world scientific and research centers, as well as increased accessibility of equipment and software of interested users.www.mgsu.ru

Msasa Xypex – Booth 066Our focus as Msasa has been on providing the best waterproofing and durability solutions available from a basket of key materials of unsurpassed quality and pedigree. From the Acid Mine Drainage Projects to retaining walls or lift pits, or indeed Mrs Jones’ balconies, we have the proven & tested solutions available together with an experienced network of Approved Applicators through-out South Africa and within SADC. www.msasa.co.za

NAFBI – Booth 540National African Federation for the Building Industry was founded in 1979. The Federation is represented in all nine Provinces of the Republic of South Africa. The Federation represents black Emerging Contractors, professionals and supplies in the construction Industry. NAFBI’s primary objective is economic access facilitation, capacity building and business linkages. The Federation is a member of Business Unity South Africa, the Construction industry transformation Charter Council, CIDB National Stakeholder Forum and Presidential infrastructure planning task team. www.nafbi.org

Namco Guarantees – Booth 349Namco Guarantees is one of the leading Construction Guarantees providers in South Africa. Operating within the structured legislative framework of the National Credit Act, we are a registered credit provider and a FIC Accountable institution.Our conservative approach based on strong business principles, has resulted in consistent growth and success over the years for both our business as well as that of our clients. This has enabled Namco to become the preferred guarantees specialist in the country. www.namcoguarantees.co.za

NHBRC – Booth 041The National Home Builders Registration Council (NHBRC) is a regulator body of the home building industry. Our goal is to assist and protect housing consumers who have been exposed to contractors who deliver housing units of substandard design, workmanship and poor quality material. No matter the size or value of your home building project the NHBRC is here to protect you, the housing consumer.Established in 1998, in accordance with the provisions of The Housing Consumers Protection Measures Act (ActNo. 95 of 1998) the NHBRC’s mandate is to protect the interests of housing consumers and to ensure compliance to regulated building industry standards. www.nhbrc.org.za

MbongeniProperty Improvement Specialists

Exhibitor listings


Nordimpianti – Booth 336Since 1970, NORDIMPIANTI has been one of the world´s leading suppliers of machinery, equipment, production lines and complete production plant for the manufacture of pre-stressed concrete elements.Nordimpianti’s casting machines (Slipformer, Extruder and Wet Casting) can produce a wide range of products such as Hollow core slabs, Vineyard posts, Lintels, T Beams, Slabs with lattice ribs, Inverted double T Beams and Slabs, Double ribbed slabs, U-Panels, up to the large 1m hollow core slabs used for the most demanding construction applications. www.nordimpianti.com

Olympic Paints – Booth 460We are proud to be a South African Paint manufacturer since 1981. We manufacture and supply superior quality paint products together with budget-line paint products depending on specific market needs.For more than 35 Years we have developed and supplied decorative and industrial coatings to serve varying industry needs such as building contractors, office environments, households and the steel industry. Our product range includes primers, undercoats, finish coats, varnishes, putty, waterproofing sealers and industrial cleaners.www.olympicpaints.co.za

OMEGA BOYA VE KIMYA SAN. TIC. LTD. STI. – Booth 469Founded in 2003, our company has been serving all its customers with the principle of memnuniyet maximum customer satisfaction es since its establishment. We also make a difference with our expertise as well as our quality with customer-specific products and the right product recommendations for the right job. In our work with many small and small companies, we are growing together with our interest in every single customer and our experience with our increasing knowledge and dyes.With our incessant R & D and quality control department that captures every mistake, we are moving forward with innovative steps in the industry coatings industry. As the OMEGA family, working with a full team spirit, we include the power of communication with our close relationships with suppliers and customers. We have ISO 9001: 2015 certificate and TSE certificated products. Our primary vision is to provide quality and fast service to our customers with our innovative vision.We will be happy to start a long and fruitful cooperation with you. www.omegaboya.com

ORNEK ELMAS TESTERE SAN. VE TIC. LTD. STI. – Booth 471Our company in the natural stone industry with the experience based on the earlier than in 1980. Dr. Founded by Nedim Örnek. Our company has established a new production plant in Dilovası, Kocaeli – Dilovası in 2011 with the aim of sustaining customer satisfaction by using the latest technology in the production line. Örnek Diamond is one of the first companies to bring Vacuum Technology to our country. As a result of producing quality products and keeping customer satisfaction in the forefront, New Generation Cutter, which follows the world closely, offers the diamonds to our country.www.ornekelmas.com.tr

OVS Solutions (Pty) Ltd– Booth 631Rapid Global is a supplier of workforce management software. It’s wide range of software products cover a variety of scenarios – including managing contractors work permits, incidents and asset maintenance and ensure companies remain compliant with health and safety standards and other regulations.www.rapidglobal.com

Penetron – Booth 334Penetron® is an Integral Crystalline Concrete waterproofing Admixture manufactured in the USA. Penetron has been enhancing the durability of concrete for over 40 years by using its optimal crystalline technology to reduce the permeability of concrete. Penetron® is the world’s leading crystalline waterproofing admixture, all Penetron production facilities are ISO 9001 and ISO 14001 certified, this combined with our on-site technical support makes us the industry leader in cementitious waterproofing products.www.penetron.co.za

Pipes, Pump and Valves Africa – Booth P115/P805The magazine is endorsed by SAPSDA, SAVAMA, SAPMA and VAMCOSA. The main focus of “Pipes, Pumps & Valves Africa” is to develop the pipes, pump and valves industry not only in South Africa but aims to develop the industry in all Southern African countries. Training is the main driving force in the development of the Pump and Valves Industry in Southern Africa focusing on Pump Systems as well as Seals, Electric Motors, Couplings and Drives.www.pumpsandvalves.co.za

Exhibitor listings


Pilot Project LLCSince 2010 LLC «Pilot project» invent, produce and implement new fire suppression technologies and products. Company invents safe and effective means of fire detecting, suppression and neutralization, that surely prevent fire spreading.Company’s developments in the different science fields allow us to offer a new concept of predicting fire, making warning earlier, extinguishing faster and more efficient.Our means of protection against fire change the philosophy of fire preventing, letting people feel more secure.Company`s products are effective for:• Protection of electrical equipment from fires• Protection of local volumes, including cable channels• Effective solutions for fighting fires in the home• Safe extinguishing of burning clothing on the body• Extinguishing of cars and military vehicles• Fire safety in public placesIn Russian Federation company`s products are regularly supplied to transport and metropolitan facilities, military and civil defenсe facilities, educational and health care facilities, gas and power facilities.www.pilot-project.ru

PMSA – Booth O27PAN MIXERS SOUTH AFRICA (PMSA)is Africa’s largest manufacturer of concrete brick, block and paving machinery, supplier of concrete pumps (Sermac), planetary and twin-shaft mixers (Eurostar), turbine and counter-current rapid pan mixers (PMSA), moisture measuring systems (Franz Ludwig), oxide dosing systems (Finke Dosiertechnik), kerb stone machinery (Wil El Mil Engineering), concrete pipe machinery (BFS Casagrande), self-loading concrete mixers (Fiori), mixing and weigh batching plants (PMSA) and production pallets (Rettenmeier). We manufacture high quality, competitive products designed to meet the requirements of the local and international markets. By consistently meeting the needs of our customers, we aim to remain the dominant player on the African continent and beyond, whilst developing lasting partnerships through service & support and utilising the latest technological advances. www.pmsa.com

Pratley Marketing – Booth 309Established in 1948 by George “Monty” Pratley, the Pratley group of companies rests on a foundation of research and innovation in both the manufacturing and mining sectors. The group, drawing from 70 years of experience, has filed over 350 patents worldwide and is ISO 9001 certified.www.pratley.com

Prospec Speacialties Inc – Booth 332Prospec Specialties are a burgeoning manufacturers of Architectural Specialties in Canada, having assembling and distribution hubs in U.A.E and Hongkong. Our dealer net-work is spread globally, catering to major infrastructural projects like Metro Rails, Airport, Shopping Malls etc. Our Product range includes Expansion Joint Covers, Commercial Door Mats, Flagpoles, Stair Nosing and Wall Protection. WE ARE LOOKING FOR DEALERS TO CARRY OUR PRODUCTS IN SOUTH AFRICAN MARKET.www.prospecspecialties.com

Protsurv – Booth 322Protsurv Geo Centre South Africa has been dealers in Surveying and Construction Material Testing Equipment since 1985. Our main brands are Pro-ikon laboratory equipment made at our factory in Kempton Park. Humboldt Construction Material Testing Equipment, Sokkia Surveying Instruments and Hi-Target Surveying equipment. Our company is SANAS accredited in force and dimension and do on site calibration of concrete and soil testing equipment anywhere in Africa. We also have office in Botswana ,Namibia ,Mozambique and Zambia. www.protsurv.co.za

POLOPLAST –Booth 240POLOPLAST develops and produces innovative plastic pipe systems in building services and civil engineering.PRODUCTS SIPHONIC ROOF DRAINAGE SYSTEM (PROJECT / APPLICATION / GUARANTEE) SILENT DRAINAGE SYSTEM UNDERGROUND AND INDUSTRIAL PIPES CENTRAL VACUUM CLEANING SYSTEM PPR, MULTI-FLOOR PRESSURE CLEAN WATER PIPES CONCRETE TRANSFER RESERVATION www.poloplastsa.co.za

Exhibitor listings


RBM – Booth 123Founded in 1953, RBM today is a leading company in the plumbing and heating industry, operating worldwide. The company has 4 production plants in Italy, 4 branches in Europe and more than 250 employees. In order to offer the highest levels of quality RBM develops all its products: from the mould, to customer care.RBM manufactures in Italy components for HVAC systems: balancing valves, radiator valves, manifolds, zone valves, water filters, PRVs, air vents, fittings, ball valves, check valves and plastic pipes. The company also develops and manufactures complete radiant heating and cooling systems and heating metering consumption systems. www.rbm.eu

REDIKS YAPI MALZEMELERI PAZARLAMA A.S. – Booth 532ED STRAFOR has started production in October 2010 in Elazığ Organized Industrial Zone on 8000 sqm area. ED STRAFOR continued its branding process in 2011, while producing insulation products such as REDPOR, EPS, REDBOARD and İKS XPS, REDBOX in packaging products, DECORED in decorative products and construction chemicals in the construction industry under the trademark REDTHERM and started to manufacture ceiling coverings, lamp hubs and injection boxes. In 2015, REDCOLOUR dye production facility was established. ED STRAFOR is quality –oriented, customer-priority, competitive and pionners change. The company continues its investments in paralel with developments in the sector. www.rediks.com.tr

Revaro – Booth 214We offer exceptional value for money to everyone in the construction and concrete industries where we supply earth moving equipment, materials handling equipment, brick making machines and production pallets, lintel, beam, pole and hollow core slab making machines, roof tile machines, aggregate batching plants, concrete mixers, stone crushing plants, pre-stressed concrete wire and strand. The payback period for machinery bought from us is up to 50% shorter than with our competitors enabling our customers ROI much sooner! All our products are manufactured with the highest quality materials specially designed and manufactured to service the cement brick and block manufacturing, storage and transit industries. www.revaro.co.za

Rheinzink GmbH & Co KG – Booth 230The construction of buildings satisfying today's demands on architecture, energy concepts and economic efficiency / processes is characterized by great complexity. Expert advice and assistance is important during planning and execution in the case of a material such as RHEINZINK with numerous applications, which may range from roof drainage to cladding for buildings of all shapes and sizes. We would be delighted to help you with planning and execution of your construction projects from the outset. Whether you need information about the right installation system or a design structure, recommendations from experienced installers or support with drawing up specifications, we are the people to call. www.rheinzink.co.za

Rober Kunststoffe GmbH – Booth 319Producer of Roofing Sheets in transparent materials like Polycarbonate and PMMA - Made in Germany -Roofings Sheets like IBR and other Corrugated Sheet Profiles. www.roeber-kunststoffe.de

Rock Drill Technologies – Booth 013Rock Drill Technologies (RDT) supplies pneumatic rock drills and paving breakers to the quarrying and construction sectors offering great value for proven technology. We also supply ancillary items such as drill steel, drill bits as well as associated items for drilling small diameter holes. We are also the distributor for the DECO hydraulic breaker range offering cost competitive South Korean technology for all sizes of excavators up to 90 tons.RDT distributes the Loadhandler bakkie offloading units that offer labour saving and improved efficiencies using a manually operated conveyor. With payloads of 1.3t this unit reduces the safety risk whilst speeding up off-loading. www.loadhandler.co.za

Roco Group Co Ltd – Booth 328Founded in 2012, ROCO Group is headquartered in Shanghai and has operations in China, Pakistan, Iran, South Africa and Ghana. ROCO is committed to providing global businesses with a one-stop sourcing solution covering a diverse network of trusted suppliers in China and Southeast Asia. We want to be your Partner of Choice in Asia.Our comprehensive procurement services include market research, supplier due diligence, product development and project management, quality assurance, financial services and logistics.Since its founding, ROCO has experienced impressive growth in its role as a link between China and the world; doing business in many of the strategic “Belt and Road” countries. Our core industries include: power transmission с water distribution infrastructure, industrial machinery and equipment and construction materials and equipment.Clients include many large multinational and national companies such as:South Africa SASOL, AUCOR, Ghana Water Company Limited, Electricity Company of Ghana, Pakistan PACKAGE GROUP. www.rocogroup.cn

Exhibitor listings


Rubber It – Booth 542Rubber It has been in business since 2007 and we manufacture all our own products.We manufacture the following:– Multi Guard Rubber for Metal Roofs , Tile Roofs and Asbestos Roofs– Rubber Guard Rubber for Concrete Roofs ,Dams and all concrete areas and Internal Gutters– B- Rubber for Floors and all areas that needs a hardwearing coating and protection and is also acid,

oil , diesel and petrol resistant– B-Earth range of coatings that protects and seals against rust and the elementsWe supply agents country wide and we export our products to Europe and into Africa we also have our own factory application team.www.rubber-it.co.za

Ruthmann GmbH and Co KG – Booth 316www.ruthmann.de

SABS – booth P99www.sabs.co.za

SACAP – Booth 650The South African Council for the Architectural Profession (SACAP) is legally charged with regulating the architectural profession. Its mandates are provided for in the Architectural Profession Act 2000, (Act No. 44 of 2000) which came into operation in 2001. It upholds the standard of education and training through accrediting Architectural Learning Sites situated within tertiary institutions. It registers suitably qualified candidates and professionals and promotes Continuing Professional Development through collaborative engagement with Voluntary Associations. It protects public interest by identifying the type of architectural work each category of registered person is capable and competent to perform and administrates a Code of Conduct. www.sacapsa.com

Sanika Waterproofing Specialists – Booth P95Sanika Waterproofing Specialists was founded over 30 years ago with an ultimate goal in mind – to become a trusted expert in the waterproofing industry to contractors, engineers, architects and building owners alike. During this time, we have been instrumental in developing and manufacturing, high quality industrial and mining waterproofing and roofing systems. Sanika Waterproofing are the exclusive approved distributors and applicators of Kryton Crystalline Waterproofing products and Emseal Expansion Jointing Systems for Southern Africa. Our profile extends within the Commercial, Industrial, Agriculture and Mining Spheres and we pride ourselves in preparing long term, cost effective high-quality concrete rejuvenation and waterproofing solutions, painting and waterproofing coating systems nationwide. www.sanika.co.za

SAPPMA – Booth P102The Southern African Plastic Pipe Manufacturers Association (SAPPMA) was launched in 2004 to represent the interests of the well-developed plastic pipe business in South Africa and surrounding countries. The scope and purposes of SAPPMA are far-reaching and cannot be overemphasized. Benefits of membership to companies, and benefits of specification to engineers are substantial. www.sappma.co.za

Scam – Booth 221Our mission is to supply our customers with the highest and most up-to-date quality and to guarantee a long life to plants and equipment manufactured by our Company, ensuring the highest reliability and the lowest maintenance requirements during operating years.Our standard quality is absolutely one of the highest available and guarantees our equipment with a long operating life and the highest constant yield in time.After 40 years of continuous operation, some important electric companies still use our vacuum pumps, and we can still supply them with new spare parts to extend the pumps working life.Our first goal was to gain trust and loyalty from our customers. And we succeeded in retaining them: our customers know that purchasing equipment from SCAM means getting the utmost trustworthiness and reliability. www.scam-technology.com

Sedam Aluminium – Booth 305Sedam Group of Companies established in 1981, Sedam Group is a leader in providing value-added Aluminium services provider.Our services include Aluminium Composite Panels, Glass, Steel Structure and Construction services to our customers by creating a successful partnership with them throughout the process. Our pledge is to establish lasting relationships with our customers by exceeding their expectations and gaining their trust through exceptional performance by every member of the team. www.sedam.ae

Exhibitor listings


Shiv Enterprises / IPM Bath Fittings – Booth 458Established in 1966 with 50 years of Experience and still counting, We at IPM, believe that ultra modern technological setup is the fundamental to world class products. We continuously strive to create value and exceed customers expectations in quality, delivery and cost effectiveness through continuous product innovation and cutting edge technologies. In line with our mission to deliver superlative Kitchen and Bathroom Faucets, IPM established state-of-the-art manufacturing units spread in the heart of Delhi & NCR region. www.ipmbathfittings.com

Shockproof Investments – Booth 477Shock Proof Investments is the main holding company and deals with engineered tools and machinery. Shock Proof Investments has been supplying the industry since 2004 and has fast grown to be the largest in our industry, the company’s primary focus is in developing and manufacturing products for the timber treatment industry as well as the Roof Truss Product Industry. We at Shockproof boast a 2040m/2 factory with 56 staff. All our staff have been trained by either a Skills Development Program or we provide them with training and schooling to achieve tradesman status. www.shockproof.co.za

SINERJI YALITIM IZALOSYAN INSAAT ENERJI VE YAPI MALZ. SAN VE TIC. A.S. – Booth 462

Sika – Booth 302Sika is a specialty chemicals company with a leading position in the development and production of systems and products. Sika’s products are used in almost every aspect of modern living, from building bridges, dams, roads and harbours to high-rise buildings.When using Sika systems, quality, durability and sustainability are added. Sika’s product lines feature high-quality concrete admixtures, speciality mortars, sealants and adhesives, damping and reinforcing materials, structural strengthening systems, industrial flooring as well as roofing and waterproofing systems. www.sika.com

Sipar SRL – Booth 119SIPAR is ITALIAN company which produces profiles in extruded aluminium and in aluminium with foam for ROLLING SHUTTERS with the most important accessories for the assembling of the shutters such as side caps and box profiles, gears, joints, handles, guides and end slats. Moreover SIPAR offers also a full range of aluminium systems for fences, windows and doors, stairs and jalousie. www.siparonline.com

Skancraft GmbH & Co KG – Booth 229www.skancraft.com

SlabPRO – Booth 644SlabPRO – Rib & Block slab material suppliers.We have more than 10 years’ experience in the supply, manufacturing, design and installation of slabs throughout South Africa. We invest in modern rib and block slab construction practices and techniques in order to ensure that we remain at the cutting edge of our industry, with a portfolio of successful projects across a range of sectors including both residential and commercial.Affordable cost effective Service delivery without compromise. www.slabpro.co.za

Sorex Welding – booth P105SOREX WELDING CO., LTD, was founded in 2004; the leading tech. R&D team members set up since 1973 and has devoted to enhancing the welding consumables professionally the local manufacturer, Taiwan.www.sorex.com.tw

Sobek IT – Booth 507We are multi-disciplinary technology and solutions provider operating in the virtual infrastructure sector of developing economies helping government, public and private organizations to develop their technology and digital infrastructure both independently and in partnerships.www.sobekit.co.za

SONNE AKTION LTD – Booth 447The solar water heaters Sonne is Greek construction, certified by international standards. The production process takes place entirely in our modern factory in Schimatari. In order to ensure the best possible service to our customers, we have created a large network of dealers throughout Greece. We are proud to have created a high-quality product at competitive prices. www.sonne.gr

Southern Pipeline – Booth 113Southern Pipeline Contractors is a leading pre-cast concrete product and pipeline manufacturer and supplier in Southern Africa.SPC’s Southern African adventure started in 1965 and today employs more than 300 people. The company focuses on training and skills development in order to maintain product and service excellence. www.spc.co.za

Specialized Coating Systems (Pty) Ltd – Booth 420Specialized Coating Systems (Pty) Ltd is a South African paint manufacturer. We focus on providing quality and high-performance coating systems & equipment for construction, industrial + protective & wood finish applications. www.speccoats.co.za

STC TECHNO-AC LLCSTC TECHNO-AC LLC (Russia) is the part of TECHNO-AC Group, which designs, manufactures and sells NDT equipment. STC TECHNO-AC LLC exports cable locators, cable and pipe locators, acoustic fault detectors, water leak detectors to 30 countries all around the world and has dealers in Australia, Columbia, UAE, Saudi Arabia, South Africa, India, Egypt, Czech Republic. Our devices are used for cables location (electric, telecommunication, armoured optic-fiber cables) for metal and nonmetal pipelines location underground up to 10 m depth, for water leak detection from metal and pvc pipes. Furthermore, we offer combined and multifunctional sets, which are used to solve several tasks simultaneously. We provide full technical and after- sales support to all our clients. www.technoac.com

Taishan Fibreglass – Booth 333Taishan Fiberglass S.A. is a leader in the supply of fiberglass materials throughout the world. We supply a whole range of reinforcing materials such as Alkaline CemFil ® Fibers, E-glass Fiberglass mats and rovings, Corrosion Resistant TCR mats and rovings and various other composite materials in South Africa.www.ctgf.com

TAL – Booth 340With a 40-year track record, TAL is the professional choice in the tiling and construction industry. This market leader supplies a range of specialist multi-level systems for tiling and vinyl flooring installations, waterproofing, polyurethane and epoxy floor coverings as well as a range of concrete repair solutions and surface treatments. TAL guarantees the performance of their products on site. Valued added services include free technical specifications, on-site technical advice, training and support on projects. The TAL laboratory is ISO 17025 (1348:2007) accredited, and their technical advisory staff are a phone call away. Visit TAL for the latest product systems and solutions. www.tal.co.za

Tata – Booth 007www.tatamotors.co.za

TD Plastmass Group LLCSince 2006 TD Plastmass Group LLC is the supplier of unique wear resistant polymers of ZEDEX ® in the territory of Russia and the CIS countries. Over the years, the company has gained considerable experience in polymer compounds and, having studied the modern market of Russian engineering, opened its own production of high tech world class ZEDEX ® materials in Russia.Today, the company ”TD Plastmass Group” produces more than 30 brands of materials ZEDEX ® (based on the engineering thermoplastics PEEK, PPS, PET, PTFE, PEI, PI, UHMW and the unique additives), their quality far exceed the world famous analogues. We have different forms of delivery: from the primary (granulate) to the final product (sheets, rods, tubes) and components made under the client’s order. ZEDEX ® materials have improved technical characteristics, which allow them to replace traditional technologically old fashioned materials still used in the Russian industry in the friction/sliding units and mechanisms (expensive metal alloys, bronze, fluoroplast, textolite, polyamide, etc.). From ZEDEX materials by machining and molding are made by various parts of the friction-sliding units and lining for operation surfaces of various mechanisms at the enterprises of almost all industries: building, mining, gas and oil, atom and are widely used in medicine. www.plastmass-group.ru

TeMa South Africa (Pty) Ltd – Booth 213TeMa South Africa is the local subsidiary of TeMa – Technologies & Materials from Italy. The business was founded in 1993 and offers value-add and innovative specialist Geosynthetic and building-related products to a wide range of markets and industry sectors throughout the globe. TeMa is a truly global company with production facilities in 6 countries across 3 continents and distribution networks extending into some 60 countries. The product range includes Geotextiles, Reinforcement Geogrids, Cuspated Drainage Sheets, Composite Subsoil Drainage Modules & Piping Systems , Erosion Control Products, Gabions and Mattresses, Liner Systems, Waterproofing, Insulation and Roofing products.www.temasa.com

TENSAFORM MEMBRAN YAPILAR SAN. VE TIC. A.S. – Booth 464Tensaform Membran Yapılar Sanayi Ticaret A.ŞOperates in "Tensile membrane structures and constructions", one of the most creative applications of today's architectural approaches. The most important factor that makes Tensaform preferred in textile architecture and membrane shell structures is its turnkey approach from design to application. www.tensaform.com

Exhibitor listings


Exhibitor listings

The Pekay Group – Booth 016The Pekay Group is a wholly South African company celebrating 60 years of service to the Building and Construction industries. The Building Products division, Jayco Sealants, manufactures a wide range of Polyurethanes, Epoxies, Acrylic and Rubber sealants and waterproofing compounds. We are market leaders in Eco-Friendly Polyurethane and Hybrid sealants for all your sealing needs. Our range is locally manufactures giving us a significant price advantage. Come and visit us at our outside stand, which will include demonstrations of our range. www.pekaygroup.com

TherraWood – Booth 544UNIVERSAL COMPOSITE MATERIALS (UCM)is the sole manufacturer of TherraWood branded wood polymer composite (WPC) outdoor solutions. Company has been established in June 2008 and headquarters are located in Istanbul, Turkey. Manufacturing facilities are located at Corlu, Tekirdag which is 100 km west of Istanbul. Since the first days of establishment, company has grown over 800% in means of turnover. As of today, UCM is operating with 12 extruders with an annual capacity of 6.000 metric tons per year. All production steps – wood grinding, polymer recycling, wood drying, mixing, extrusion, tooling, and surface treatment is realized in house. Our profiles are mainly used for: Decking – Pergola – Siding – Fencing – Railing – Pre fabricated houses and Hybrid installations.Other than the domestic market, we export 50% of our production to 55 countries in 4 different continents. Also, 2 new joint ventures established in 2015 in order to serve customers better with local warehouses. First one is TherraWood Middle East Fzc which is located at Sharjah Airport International Free Zone with 400 sqm of warehouse and office facilities. Second one is TherraWood North America LLC which is headquartered in Richmond, Virginia with 1.000 sqm warehouse facilities in Atlanta. Another joint venture (TherraWood Europe GmbH) is planned to establish in Germany at the end of 2016.www.therrawood.com

Thermguard – Booth 608Thermguard has been making cellulose fibre ceiling insulation for 35 years and we are expanding into other markets! The company has recently relocated to larger premises in Johannesburg to better service our ever expanding customer base. We are currently developing acoustic panels for use in open plan offices, boardrooms, atriums and lecture halls, to name a few. The fact that Thermguard is made from more than 80% recycled material makes it the most eco-friendly thermal and acoustic insulation on the South African market. Our fibres are treated with non-toxic additives to make them fire retardant to SANS specifications as well as insect and rodent resistant. The construction industry is looking for solutions to the problems of sustainability and, more recently, load shedding. Thermguard is the answer when it comes to insulation because of its high recycled content, low-energy manufacturing process and, because it is an insulator, it helps to reduce the load on heating and cooling devices within a building. www.thermguard.co.za

Tianjin Sure Equipment Co.,ltd. – Booth P125THE TOP 5 FLOW METER MANUFACTURE IN CHINA. MORE THAN 350 STAFF, WITH 30 ENGINEERS EXPORT FOR 60 COUNTRIES 70,000M2 WORK SHOP QUALIFIED SUPPLIER FOR NUCLEAR INDUSTRY PROFESSIONAL OEM SERVICE. www.suremeter.com

Total – Booth 112Welcome to Total South Africa (TSA), a company with global links. Our business is the manufacturing, sales and marketing of a range of petroleum products for the retail, commercial, agricultural and industrial markets. With a portfolio of 530 service stations located throughout South Africa and 50 in the neighboring countries of Namibia, Botswana, Lesotho and Swaziland, TSA is a key player in the Southern African petrochemical market, with products such as jet fuel and liquid petroleum gas, lubricants, grease and all grades diesel and petrol. The company was established in South Africa in 1954, after a Frenchman came to visit and saw a large, well established agricultural industry. Total first entered the market by supplying farmers with lubricants for their machinery. It was in 1956 that Total embarked on the development of a service station network. Today we have a strategically positioned network of service stations along with our Bonjour and La Boutique convenience stores.TSA forms part of a leading multinational French energy company and enjoys a 36,6% share in the Natref Refinery. It has wholly owned subsidiaries in Namibia, Botswana, Lesotho and Swaziland (NBLS).The company has its head office in Johannesburg, 22 strategically placed depots, and two regional sales offices – one in Cape Town and the other in Durban. At Total we aim to attract talented people and consider ourselves a learning organization because we understand that it is people who will drive the company’s growth and strategy. www.total.co.za

UIF – Booth 709www.ufiling.co.za/uif


Unnati Pumps – Booth P103Unnati Mech Pvt. Ltd. – is a professionally managed and quality-conscious company manufacturing Power Driven Pumps, Stator Rotor (Kit) and Pump/motor.www.unnatipump.com

Vag-Valves South Africa – Booth P113VAG can be found wherever water is pumped, treated, stored and distributed. The world demands modern water management – and that’s precisely what VAG supplies. With innovative standards in water and wastewater engineering, VAG has positioned itself not only as a supplier of solutions, but also and above all as a quality manufacturer when it comes to durable valves, high functionality and load-bearing mechanisms.VAG valves are installed amongst others in barrages, dams, water works, drinking water supply networks and wastewater systems – wherever reliable closing and regulating mechanisms are indispensable.www.vag-group.com/za

Valve hospital – Booth P110Valve Hospital is a specialized company focused on refurbishment of valves used within industrial applications.www.valvehospital.co.za

VAMCOSA – Booth P101The Valve and Actuator Manufacturers Cluster of South Africa (VAMCOSA) was formed in July 2011 and works within The dti's designated cluster parameters. VAMCOSA's focus is to bring local valve and actuator manufacturers together in order to create a common focus and goal for the respective industries. www.saceec.com/vamcosa

Vermont Sales – Booth 244Vermont Sales, Southern Africa’s #1 Powertool Accessory Supplier, has delivered exceptional service to the trade for the last 32 years. In doing so, it has developed the top brands like Alpen, Rawlplug, Samedia, Festool and others. Powered by Service, focus has always been placed on brands in order to develop each individually with its own identity and market position. As a result consumers interact with each product without the emphasis on the company housing these wonderful brands.However, Vermont Sales itself is now known as the foremost brand promoter in the trade. Many international manufacturers and companies wanting to enter the South African market have knocked on their door, as Vermont Sales have proven success over the years in competently representing these ranges.www.vermontsales.co.za

VERNILAC – Booth 451VERNILAC SA was established in 1960 and has for more than 50 years been dedicated to the production of high quality coatings and has created a reputation for a wide range of products designed to meet the high demands of industries, architects and building professionals.www.vernilac.gr

VIARTECH, I-EXP, LLCViartech is a professional independent development team that creates products in the field of machine learning, cloud computing, as well as mixed reality. Viartech Mixed Reality is a blend of augmented reality technology, cloud computing and machine learning. By combining the principles of machine learning and augmented reality technology, we were able to train the program to “recognize” the most complex objects and attach virtual content to them. And ARCloud technology has expanded our arsenal with two unique features:•• Play advanced graphics on budget devices;•• Collective viewing and synchronization of content between users.Viartech’s customers are leading companies in the fields of industry, tourism and real estate.The main activities of the company:•• Mixed reality •• Neural network technology •• Cloud renderingBy combining technology, the team creates an AR Federation product. AR Federation is с tourist ссс that allows user to take с look at the region, its sights and places of interest, ask AI assistant to plan с tourist route, well as make с reservation. The regions connected to the AR Federation сссссс as 3D maps full of content with с deep level of detail that ссс сс viewed in augmented reality.•• ALL–IN-ONE с single ссс for planning, booking and navigation,•• YOU WONT MISS с THING Personal tips сn points of interest•• SPECIAL OFFERS Our partners (hotels, cafes, restaurants) offering discounts to AR Federation users.www.viartech.ru

Exhibitor listings


Exhibitor listings

Volvo – Booth 040We are one of the world’s leading manufacturers of trucks, buses, construction equipment and marine and industrial engines. We also provide complete solutions for financing and service. Our brand portfolio consists of Volvo, Volvo Penta, UD, Terex Trucks, Renault Trucks, Prevost, Nova Bus and Mack. We partner in alliances and joint ventures with the SDLG, Eicher and Dongfeng brands. By offering products and services under different brands, we address many different customer and market segments in mature as well as growth markets.Volvo Trucks is the second-largest heavy-duty truck brand in the world with trucks sold and serviced in more than 140 countries and supported by over 2300 dealerships and workshops. Volvo Trucks offering a range of medium and heavy duty trucks with more than 95% of the trucks over 16 tones. The company also provide aftermarket products and service as well as specific offers.Volvo Trucks has a production structure based on global presence. About 95% of the company’s production capacity is located in Sweden, Belgium, Brazil and the USA.www.volvo.com

Vortex Hydra – Booth 224Vortex Hydra originated 50 years ago in 1967 in Ferrara (Italy) to become active in the design and manufacture of industrial automation solutions. Today the company is recognized for its worldwide leadership in the specialist field of concrete roof tile manufacturing machinery.In recent years Vortex Hydra have also pioneered the automation of wet cast concrete production systems.Vortex Hydra is also active in the hydraulic works industry as manufacturers and suppliers of large heavy valves to control water flows and gates used in the construction of dams and waterways. It has operated as a partner on many different international dam construction projects.www.vortexhydra.com

Wall Ties and Forms – Booth 456The 37-year-old Wall-Ties & Forms, Inc is the global industry leader in the design and production of aluminum formwork for rapid reinforced concrete construction. The firm’s headquarters is in Kansas City, Kansas State, USA. Every year, Wall Ties & Forms manufactures and ships over 30 million pieces of aluminum forms and accessories to different parts of the world.www.wallties.com

Wardco Projects – Booth 212Importers and distributors of industrial sandblasting, spray painting and pneumatic fittings and hoses.www.wardco.co.za

Watevereco Company (Pty) Ltd – Booth 012Watevereco is a company focused on providing cleaning chemicals to the concrete manufacturing industry that is both user and environmentally safe, we strive to help our clientele with products that best suits their environment and cleaning needs.Our clientele comprises of, Bulk Transport, Brick Making Industry, Concrete Manufacturing Sector, Readymix Concrete Sector, Construction Sector, these include large companies as well as small independent operators.We strive to use ingredients from renewable resources obtained from processes that are respectful to the environment and prohibiting a range synthetic or toxic ingredient. Our products are all water soluble and biodegradable.www.weec.co.za

WENZHOU CHISUN VALVE MANUFACTURE CO.,LTD. – Booth P120COMPANY IS SPECIALIZED IN KNIFE GATE VALVE OVER 90 SERIES AND 2800 SPECIFICATIONS AND TYPES. THEY ARE WIDELY USED IN AUTOMATIO CONTROL SYSTEM OF PAPER MAKINGсCHEMICAL FIBERсPETROCHEMICALсFOODSTUFFсMETALLURGYсELECTRIC POWERс PETROCHEMICALсETC. www.chisunvalve.com

Wireforce – Booth 308We manufacture a wide range of wire products to cater for Industrial, construction, agricultural and merchant requirements.Together with our highly skilled and experienced technicians, we can provide consistent quality and fit for purpose wire solutions for all requirements.Our infrastructure allows us the flexibility to accommodate both small and large orders. We endeavour to offer the best quality wire products and deliver a superior service experience to all our customers at a reasonable price.www.wireforce.co.za


Yangzhou pipe fitting factory Co.,ltd. – Booth P133Yangzhou Pipe Fitting Factory Co., Ltd, a company specialize in manufacturing pipe fittings, which the size from 0.5 inch to 80 inch and the wall thickness from SCH10S to SCH160, according to ASME and the other standards. www.yzsgjc.com

Yingkou Economic and Technology development zone Xinfeng pipe fittings Co.,ltd. – Booth P92Xinfeng is a leading ductile iron pipe fittings manufacturer in China. Fittings can be manufactured from size DN80 to DN2600 according to ISO2531, BS EN545, AWWA C110/C153, etc.This year, our new foundry will put into operation with annual production capacity 50,000t. www.lnxf.cc

Zcon Technologies Ltd. – Booth 544Zcon Technologies Ltd. was established in 2010 noticing the need of an affordable supplier of turnkey solutions for any precast concrete manufacturers.Since then our company started to design and manufacture equipment based upon the most updated methodology with logical functionality by listening to our customers. We benefit from our own in-house design office to launch innovative technologies, practical solutions, and state-of-the-art equipment. We are today able to provide machines, mold equipment, test equipment, handling and transport systems for both concrete and end products.We have supplied numerous installations for our clients all over South East Asia, and are currently expanding to other markets.www.zcontechnologies.com

Zhejiang Dayuan pumps industrial Co.,ltd. – Booth P141FOUNDED IN 1998, OUR COMPANY OWNS 1300 EMPLOYS AND SELLS 3 MILLION PUMPS PER YEAR TO 70 COUNTRIES POSSESSING INTERNATIONAL CERTIFICATES SUCH AS CE GS SGS UL ETC. www.cnpumps.com

Zhejian qiangye pipe fitting Co.,ltd. – Booth P91Wenzhou Qiangye pipe fittings Co., Ltd. is a professional industrial and mining pipe fittings manufacturers, specializing in the production of high-tech elbow, tee, reducer, flanging, cap and professional forging, the production of flange enterprises. The company "quality first, the credibility of the first" a principle of service, wholeheartedly welcome the broad masses of old and new customers to our company order, business negotiations. The main products: GB, American Standard, the standard, seamless three-way, reducer, flanging tube, 45 degrees 90 degrees 180 degrees, flat welding flange, with neck flange, ring connecting flange, loose flange , Threaded flange, pressure vessel flange, and to undertake non-standard pipe fittings, flange manufacturing. www.wzqygjfl.com

Exhibitor listings


IT TAKES MORE THAN CONCRETE TO BUILD YOUR VISION.

HERE’S TO THE BUILDER IN YOU.

Creating Concrete Possibilitieswww.afrisam.com

12935_AfriSam_Construction 2018_148x210.indd 2 2018/05/07 10:03 AM

www.africanconstructionexpo.com Organised by:

9 - 11 June 2020 Gallagher Convention Centre, Johannesburg, South Africa

Grow your business in Africa’s multi-billion construction sector

• Reach 2 million prospective buyers

• 36 years of experience in organising events

• Dedicated exhibitor marketing services

• Unparalleled networking opportunities

• Strong government alliances

Benefits of exhibiting with us

BOOK YOUR STAND FOR 2020

[email protected] +27 21 700 5500

Get in touch to get a tailored exhibiting or sponsorship package to ensure that you achieve the maximum benefits from the expo.

Co-located with

AfricanConstructionAwards • 2019Powered by: NAFBI

11 - 12 September 2019 Sun Exhibits, GrandWest Cape Town

www.capeconstructionexpo.com Organised by:

CAPE

Book your stand for 2019

[email protected] +27 21 700 5500

Get in touch to get a tailored exhibiting or sponsorship package to ensure that you achieve the maximum benefits from the expo.

The MUST ATTEND event for construction professionals in the Western Cape region


Partner listings

Host City: City of JohannesburgThe City of Johannesburg’s Group Communication & Marketing Department provides communication leadership to drive service delivery, development and raise awareness of the City’s priorities. By effectively leveraging all key communication platforms, Group Communication and Marketing aims to empower Joburg residents and position the City in a positive light. The department also strives to build collaborative relationships with existing and new business partners in the communication ecosystem, ensuring that together we best meet the imperatives and needs of the people and communication goals of the City of Johannesburg.www.joburg.org.za

Endorsing Ministry partner: The Department of Energywww.energy.gov.za

Endorsing partner: ASPASAASPASA is a voluntary membership, private sector producers association. ASPASA is a member of the Chamber of Mines, but represents those companies that are in the business of producing aggregate and sand and is better known for operating quarries, sand pits and crushing operations.www.aspasa.co.za

Endorsing partner: BIM Academy AfricaThe BIM Academy Africa is the exclusive consulting and training partner for the BIM Institute. To help develop BIM upskilling and accreditation, the BIM Academy Africa have developed a strategic partnership with vendors and international partners to help promote and educate BIM across Africa.www.bimacademyafrica.co.za

Endorsing partner: BIM InstituteThe BIM Institute is driving dramatic improvements by developing the blueprints of the guidelines and requirements of the “Building Information Modelling initiative for Africa,” promoting software and digital processes to strengthening Africa’s built environment. In formulating a set of guidelines to improve digital construction performance – and therefore construction as a whole – the BIM Institute continues to engage with early-adopter countries like the United Kingdom, Australia and Canada, where they have transformed their respective sectors in recent years using these technologies. Valuable lessons should be learnt from the key countries in these initial development phases and it is crucial to translate these into usable steps that take Africa’s unique strengths and challenges into account. Visit BIM Institute at stand 803 in the Digital Construction Zone.www.biminstitute.org.za

Endorsing partner: Concrete Manufacturers AssociationThe Concrete Manufacturers Association (CMA) is the primary representative of the precast concrete industry. Now in its 46thyear, it initiates standards in close cooperation with StanSA and collaborates with its members in developing new products and services. Precast concrete is a building material which slots very comfortably into the modern world of fast track and modular construction, in many instances leading the way with innovative technologies and applications.The CMA’s promotional activities target architects, engineers, developers, contractors and property owners and the pooled knowledge and expertise of its members fosters an environment which encourages the development of innovative, environmentally and community-friendly products. www.cma.org.za

Endorsing partner: Master Builders NorthThe Pretoria Master Builders Association was founded in 1903 and the Johannesburg Master Builders Association was founded in 1894 and was formally constituted in 1904. These organisations merged in January 1996 to form the Gauteng Master Builders Association (GMBA). In 2012, the association underwent a name change and is now known as the Master Builders Association North – incorporating the following 4 regions: Gauteng, North West, Mpumalanga and Limpopo.www.mbanorth.co.za

Endorsing partner: NAFBINational African Federation for the Building Industry was founded in 1979. The Federation is represented in all nine Provinces of the Republic of South Africa. The Federation represents black Emerging Contractors, professionals and supplies in the construction Industry.NAFBI’s primary objective is economic access facilitation, capacity building and business linkages.The Federation is a member of Business Unity South Africa, the Construction industry transformation Charter Council, CIDB National Stakeholder Forum and Presidential infrastructure planning task team. www.nafbi.org


Partner listings

Endorsing partner: Southern Africa Readymix AssociationSouthern African Readymix Association (SARMA) is a national body representing all reputable readymix companies, and is also responsible for promoting the Readymix industry and establishing readymix as the preferred construction material. In brief, SARMA’s purpose is to set standard and guidelines with regard to environmental, safety and quality issues. To be a member of SARMA these stringent policies must be met and adhered to. In addition, members are regularly audited against standards, which have been put in place.www.sarma.co.za

Endorsing partner: The Concrete InstituteThe Concrete Institute is a non-profit organisation that provides a comprehensive range of technical services in concrete to the construction industry through education, information and technical advisory services. The purpose and objectives of The Concrete Institute are to provide key services & functions to the construction industry and to promote and protect the good name of cement and concrete by:? Providing education and training through the School of Concrete Technology to users and specifiers of concrete about the correct use of the material and its constituents.? Providing free access to comprehensive technical information about concrete and cement through the Information Centre.www.theconcreteinstitute.org.za

Enterprise Development Partner: Big BluBig Blu is not your normal run of the mill skill development provider. This dynamic and reputable skills development provider is being owned by persons with special abilities. Some of these owners are quadriplegics, knowing the challenges and needs of persons with disabilities.Youth employment is one of the major challenges facing South Africa, but young people with disabilities experience even more difficulties finding and keeping a job! Skilling of these individuals need effective partnerships. DMG Events Managements Services (DMG EMS (Pty) Ltd) is one of these pillars assisting to make sure the large number of people with disabilities are not remaining unemployed, but facilitate creative opportunities for the empowerment of people with disabilities.Various accredited skills programmes are being offered. Big Blu is the preferred skills development provider of various Government Departments. Big Blu is the proud Enterprise Development partner of DMG Events Management Services. Companies that need to better their B-BBEE Scorecards are welcome to Contact Joseph Machweu at 27 82 550 4030 or write to him ([email protected]).

Knowledge partner: Databuild Construction Industry Intelligence – project leads and contact details wherever you need them.Since 1974, Databuild has supplied the most up-to-date construction project information possible through cutting-edge technologies. With our in-depth knowledge of the construction industry, Databuild is able to provide tailored solutions to product and service providers, contractors and retailers. Clients are able to grow their businesses by using our project information which is tracked from planning, through tender, award and tenant installation phases.www.databuild.co.za

Host media partner: Concrete Trends Concrete Trends provides a medium that portrays the very best in concrete, showing many examples of the creative use of this unique construction material. The journal aims to stimulate a more imaginative and innovative approach to its use in many applications. The focus is largely Southern African, although significant projects involving concrete in other parts of the world are also featured.Concrete Trends is a business-to-business journal which aims to present all material in a balanced and impartial manner and to offer readers exclusive articles and project reports. Because of its very specific focus – concrete – the journal does not publish subject features, but tries to include articles on all aspects of concrete in each issue.www.concrete.tv/concrete-trends-magazine

Official media partner: Engineering NewsEngineering News Online provides real-time news reportage through originated written, video and audio material. Readers may choose to visit the free-to-air aspects of the site, may register for daily email newsletters and may choose to subscribe to the site’s full search function, back copy archive and projects browser. A mobile version of Engineering News Online is available at m.engineeringnews.co.za and Engineering News apps are available for iPhone and Android devices. Each week, 140 002 page impressions are generated by 41 168 visitors.www.engineeringnews.co.za

Official media partner: Mining WeeklyMining Weekly is South Africa’s premier source of weekly news on mining developments in Africa’s most important industry. Mining Weekly provides in-depth coverage of mining projects and the personalities reshaping the mining industry. The publication is an essential source of information for those involved in the mining sector.www.miningweekly.com


Partner listings

Official radio partner: BuildaidBuildaid has been informing and servicing the residential building industry since 1988, through architectural services, cost estimation services, publishing, training and broadcasting. Buildaid is a specialist in building cost calculations and strives to inform, inspire and educate everyone involved in the residential building industry to assist in creating a more efficient and informed industry.www.buildaid.co.za

Association partner: ASPASA ASPASA is a voluntary membership, private sector producer’s association. ASPASA is a member of the Chamber of Mines, but represents those companies that are in the business of producing aggregate and sand and is better known for operating quarries, sand pits and crushing operations. www.aspasa.co.za

Association partner: Association of Arbitrators The Association of Arbitrators (Southern Africa) was formed in 1979 to constitute an organisation to promote arbitration as a means of resolving disputes, to assist arbitrators and ADR specialists in the efficient discharge of their duties, and to make arbitration and ADR more effective. Currently we have a competent body of mediators, adjudicators and arbitrators to assist you with your ADR needs.www.arbitrators.co.za

Association partner: Association of Construction Health and Safety Management (ACHASM) ACHASM is a registered (section 21) company and has been established to provide all those working as Construction H&S Agents, Construction H&S Managers & Construction H&S Officers working in the construction industry and defined in the Construction Regulations, with an advisory and representative body to assist in the development of this specialised field. ACHASM is a body for all who work as Construction H&S Agents, Construction H&S Managers and Construction H&S Officers in South Africa enabling the construction industry to respond to the demand for those who are both trained and monitored.www.achasm.co.za

Association partner: Association of Cementitious Material Producers (ACMP)ACMP is a voluntary organisation. Its membership is open to manufacturers of cementitious materials in South Africa. Objectives: Build stakeholder trust in the cementitious industry through relationship initiatives; Promote environmental, health and safety best practice amongst members through research, training and the establishment of industry guidelines; Promote regulatory compliance and participation with the authorities in the development of appropriate environmental and health and safety law reform; Support capacity building initiatives and represent member interests in matters affecting common industry interests.www.acmp.co.za

Association partner: Association of South African Quantity SurveyorsThe Association of South African Quantity Surveyors (ASAQS) is a membership organization representing the commercial interests of its professional members and practices.The ASAQS was formed to achieve and maintain the following goals and ambitions for the quantity surveying profession:– Advance and promote the science and practice of quantity surveying and cognate matters– Uphold the dignity of the quantity surveying professionWatch over, promote and protect the interest of its members– Afford opportunity for the interchange and recording of the body of knowledge and experience of quantity surveying– Promote the high standards of professional competence and integritywww.asaqs.co.za

Association partner: The Chartered Institute of Building (CIOB) CIOB is at the heart of a management career in construction.We are the world’s largest and most influential professional body for construction management and leadership. We have a Royal Charter to promote the science and practice of building and construction for the benefit of society, and we’ve been doing that since 1834. Our members work worldwide in the development, conservation and improvement of the built environment. We accredit university degrees, educational courses and training. Our professional and vocational qualifications are a mark of the highest levels of competence and professionalism, providing assurance to clients and other professionals procuring built assets.www.ciob.org


Association partner: Consulting Engineers South Africa (CESA)Consulting Engineers South Africa (CESA) is a voluntary association of Consulting Engineering firms with a member base across the country totaling in excess of 560 companies. CESA is the custodian of the wellbeing of the industry supported by member firms who employ approximately 21 000 people. CESA members are compelled to subscribe to upholding the integrity of the industry by adhering to a professional code of ethics providing quality and cost effective professional consulting engineering services. The organisation serves as a channel for Clients to address industry concerns while at the same time providing a platform for the sharing of information with the aim of assisting in optimising the planning and delivery of infrastructure projects both in the public and private sector.www.cesa.co.za

Association partner: Copper Development Association Africa The CDAA is a non-profit company sponsored by the European Copper Institute in Brussels and the International Copper Association in New York. The CDAA is responsible for the promotion of copper in Africa. Our mission: “To defend and grow markets for copper based on its superior technical performance and its contribution to a higher quality of life in Africa” Our offices are in Wadeville, Germiston, South Africa. We promote the use of copper in the Electrical, Automotive, Aquaculture, Plumbing, HVAC and Healthcare industries.www.copperalliance.org.za

Association partner: The Corrosion Institute of South Africa – ACTCE & PVPThe Corrosion Institute of South Africa (CorrISA) exists to serve a broad spectrum of stakeholders with an interest in controlling the impact of corrosion on asset lifecycles, productivity and human life. These anti-corrosion experts ensure that legacies are preserved, economic imperatives are achieved and that human lives are enriched and safeguarded in the process.www.corrosioninstitute.org.za

Association partner: Electrical Contractors’ Association The ECA (SA) is an employers’ organization registered in terms of the Labour Relations Act, and has been representing electrical contractors in South Africa for 60 years. It has in excess of 4000 members who employ between 70% and 80% of the total labour force in the Industry. Approximately 80% of all electrical installations in South Africa are carried out by our members.The Association represents electrical contractors at all levels, and is recognized by the Government, supply authorities, consulting engineers, CSIR, ESKOM and the Association of Municipality Electrical Undertakings as the spokesman for the Industry. The ECA also serves on the SABS Committee responsible for the Code of Practice for the Wiring of Premises.www.ecasa.co.za

Association partner: Illumination Engineering Society of South Africa (IESSA)The lighting industry of South Africa is represented by the Illumination Engineering Society of South Africa (IESSA). IESSA represents South African internationally and thereby acts as the National Committee of the CIE (Commission International De L’Eclairage). South African Experts on various topics in the lighting technology field serve on the CIE international committees responsible for the development of standards for the different aspects of illumination.www.iessa.org.za

Association partner: Institute for Landscape Architecture in South AfricaThe Institute for Landscape Architecture in South Africa (ILASA) is a voluntary organisation registered with the South African Council for the Landscape Architectural Profession. ILASA has three regional bodies, one in the Western Cape (ILASA Cape), one in KZN (ILASA KZN) and one in Gauteng Province (ILASA Gauteng), that represent members countrywide.ILASA’s mission is to advance the profession of Landscape Architecture, uphold high standards of professional service to its member and furthermore to represent the profession of Landscape Architecture in any matter which may affect the interests of the members of the Institute.www.ilasa.co.za

Association partner: Institute of Safety Management The Institute of Safety Management had its origins in the South African Institute of Industrial Safety Officers which was established in 1952. Its members cover a wide field of SHE disciplines which includes Occupational Injury and Accident Prevention, Loss Control, Fire Defense, Elements of Security, Ergonomics, Risk Management, Occupational Hygiene, as well as a comprehensive range of management skills.www.iosm.co.za

Partner listings


Partner listings

Association partner: Institute for Work at Height The main objective for which the Institute has been established is to promote communal and group interests of those companies or individuals engaged in the specialised access work at height industry, including any other associated operations or activities there to. Other objectives include: Provides a unified voice and sets and maintains Industry standards. Professional Body recognised by SAQA develops guidelines and frameworks for skills development. Professionalism, integrity and credibility of IWH members by adherence to a Code of Ethical Practice. Represents Industry views to Government Departments and the Private Sector. Provides information on all related work at height matters. Provides a regular forum for members to meet and discuss matters of mutual interest.www.profbody.co.za

Association partner: Institute for Timber Construction South Africa The Institute for Timber Construction (ITC-SA) is the South African engineered timber structure industry’s professional body, striving to create and maintain the highest standards in the sector, thereby affording the trade and consumer the protection that comes with a safely erected and inspected timber roof, home or deck.The role of the ITC-SA is to ensure consumer protection in the use of timber engineered products in contracts entered into with the ITC-SA membership and to regulate the professional conduct of its members.www.itc-sa.org

Association partner: Lifting Equipment Engineering Association of South Africa The LIFTING EQUIPMENT ENGINEERING ASSOCIATION OF SOUTH AFRICA (LEEASA) was formed by like-minded organisations and concerned industry individuals from the providers, manufacturers, maintenance, inspection, examination and training sectors in 2003. LEEASA is a voluntary association recognised by the Engineering Council of South Africa (ECSA) VA00A48 and has since nominated members to serve on relevant ECSA committees specifically the Lifting Machinery Inspectors (LMI) ECSA registration committee.www.leeasa.co.za

Association partner: Master Builders South AfricaMaster Builders South Africa is the leading representative body in the building industry in South Africa. Its primary role is to uphold the viewpoints of its members and the industry, to promote the highest quality and standards through best business practice, and to establish and maintain strategic relationships with Government and other legislative bodies to create a sustainable business environment.www.masterbuilders.org.za

Association partner: National African Federation for the building industry National African Federation for the Building Industry was founded in 1979. The Federation is represented in all nine Provinces of the Republic of South Africa. The Federation represents black Emerging Contractors, professionals and supplies in the construction Industry. NAFBI’s primary objective is economic access facilitation, capacity building and business linkages. The Federation is a member of Business Unity South Africa, the Construction industry transformation Charter Council, CIDB National Stakeholder Forum and Presidential infrastructure planning task team.www.nafbi.org

Association partner: National Home Builders Registration Council (NHBRC) The National Home Builders Registration Council (NHBRC) is a regulator body of the home building industry. Our goal is to assist and protect housing consumers who have been exposed to contractors who deliver housing units of substandard design, workmanship and poor quality material. No matter the size or value of your home building project the NHBRC is here to protect you, the housing consumer.Established in 1998, in accordance with the provisions of The Housing Consumers Protection Measures Act (ActNo. 95 of 1998) the NHBRC’s mandate is to protect the interests of housing consumers and to ensure compliance toregulated building industry standards.www.nhbrc.org.za

Association partner: Plastics SA – PVPPlastics SA represents the plastics industry in South Africa, including polymer producers, converters and recyclers. Together with our associations, we play an active role in the growth and development of the SA industry and strive to address plastics related issues, influence role-players and make plastics the material of choice.www.plasticsinfo.co.za


Association partner: SA - DRC Trade and Investment ChamberThe SA-DRC-T&I Chamber has been established as a partnership platform for the SOUTH AFRICAN and CONGOLESE business communities. The Chamber is a private non-profit organization dedicated to developing and promoting business partnerships between its members in both SOUTH AFRICA and the DRC. At the SA-DRC-T&I Chamber, we believe that we can offer the unique and most appropriate platform of communication for our members to meet and discuss business issues and opportunities and resolve problems involving business in both countrieswww.sa-drctic.co.za

Association partner: The South African Council for Planners The South African Council for Planners (SACPLAN) is the statutory Council established in terms of the Planning Profession Act, 2002 to regulate the Planning Profession.SACPLAN’s Vision is to be a pioneer of the founding spirit of innovation in facilitating sustainable and inclusive development in the planning profession of the country. SACPLAN is mandated to register Planning professionals, accredit Planning Schools, determine a framework for the provision of continuing education and training, making Rules and Regulations for the profession, maintaining a high standard of professional conduct and integrity.www.sacplan.org.za

Association partner: Southern African Plastic Pipe Manufacturers Association – PVPThe Southern African Plastic Pipe Manufacturers Association (SAPPMA) was launched in 2004 to represent the interests of the well developed plastic pipe business in South Africa and surrounding countries. The scope and purposes of SAPPMA are far-reaching and cannot be overemphasized. Benefits of membership to companies, and benefits of specification to engineers are substantial. www.sappma.co.za

Association partner: Small Contractors Association of South Africa Join SCASA and become a recognized small contractor in the building industry. We specialize in training, capacity building, finance and mentorship.www.smallcontractorssa.org

Association partner: South African Council for the Architectural ProfessionThe South African Council for the Architectural Profession (SACAP) is legally charged with regulating the architectural profession. Its mandates are provided for in the Architectural Profession Act 2000, (Act No. 44 of 2000) which came into operation in 2001. It upholds the standard of education and training through accrediting Architectural Learning Sites situated within tertiary institutions. It registers suitably qualified candidates and professionals and promotes Continuing Professional Development through collaborative engagement with Voluntary Associations. It protects public interest by identifying the type of architectural work each category of registered person is capable and competent to perform and administrates a Code of Conduct.www.sacapsa.com

Association partner: South African Institute of Building Design (SAIBD)The South African Institute of Building Designers (SAIBD) is a well experienced Institute and a fully recognized voluntary organisation, into which any architectural practitioner is welcome. The members are now made up of draughts persons to architects and from architectural practice owners to individual architectural employees. They are concerned with their member’s involvement in attaining CPD points and climbing the architectural ladder of achievement. As well as being an ever present body of knowledge, to assist their members in advice and problem solving.www.saibd.co.za

Association partner: South African Irrigation Institute – PVPSABI – the South African Irrigation Institute – strives to ensure optimal irrigation in agriculture, landscape and all environmental settings. SABI’s ultimate mission is the saving of water. SABI, a technical-based Institute, has more than 450 members, including designers, engineers, soil scientists, crop experts, entrepreneurs, economists and irrigation farmers. SABI’s company members - including manufacturers and suppliers of irrigation, water and all related equipment – range from South African to African and international companies.www.sabi.co.za

Association partner: South African Institute of Occupational Safety and HealthSaiosh is recognised by the South African Qualifications Authority (SAQA) as the Professional Body to register Occupational Health and Safety Practitioners in South Africa in terms of the NQF Act, Act 67 of 2008. With more than 12000 Members Saiosh is the leading source of information and networking opportunities within the Occupational Health and Safety profession. Members are from a wide range of industries from the private and public sector. Our non-profit organisation represents individuals and organisations committed to the enhancement of the Occupational Health and Safety discipline.www.saiosh.co.za

Partner listings


Partner listings

Association partner: Southern African Energy Efficiency ConfederationThe Southern African Energy Efficiency Confederation (SAEEC) is one of 82 chapters of the American Association of Energy Engineers (AEE). The SAEEC supports the AEE’s mission to promote the scientific and educational interests of those engaged in the energy industry and to foster action for sustainable development. The SAEEC is committed to increase energy efficiency awareness in its region by encompassing the dynamic fields of energy engineering and energy management, renewable and alternative energy, power generation, energy services, sustainability, and all related areas.www.saeeconfed.org.za

Association partner: Valve and Actuator Manufacturers Cluster of South Africa (VAMCOSA) – PVPThe Valve and Actuator Manufacturers Cluster of South Africa (VAMCOSA) was formed in July 2011 and works within The dti's designated cluster parameters. VAMCOSA's focus is to bring local valve and actuator manufacturers together in order to create a common focus and goal for the respective industries.www.saceec.com/vamcosa

Media partner: 3S Media - ACETCE & PVP3S Media offers quality information to business communities through magazines and digital media (www.miningne.ws and www.infrastructurene.ws). 3SMedia trade and technical magazines include:IMIESA Official magazine: Institute of Municipal Engineering of Southern Africa (IMESA).Water and Sanitation Africa Official magazine: Water Institute of Southern Africa (WISA).Inside Mining Focusing on mining and exploration in Africa and the rest of the world.www.3smedia.co.za

Media partner: Africa Energy Infrastructure MagazineThe magazine has become a trusted and dependable source for in-depth news and coverage of the Energy & Infrastructure sector in the continent. Working with professional and partners in the sector, we provide up to date information on the challenges and prospects in Africa’s energy and infrastructure se.www.africaenergyinfrastructure.com

Media partner: African Mining Brief African Mining Brief is a bi-monthly magazine for the mining industry, incorporating mining, quarrying, oil exploration and drilling; and other large scale extractive operations aimed at the discovery, extraction, storage, transport, sale and utilisation of Africa’s mineral wealth and resources. The magazine aspires to be the preferred and authoritative resource for the mining sector in Africa by featuring pertinent and topical issues of interest to the industry.www.ambriefonline.com

Media partner: AfricanismAfricanism is the premier news portal for architecture and design stories from across the African continent. Updated on a daily basis with the latest projects (on the drawing board, on site and in completion) as well as pertinent design features, in-depth profiles and interviews along with innovative products, Africanism aims to be the biggest and most informative site for African architecture and design.www.africanism.net

Media partner: APSAIDAL Spreading Architecture in Africa Worldwide. Architecture and Interior Design projects, Events, Competitions and News.Apsaidal is a new architectural online magazine focused on Africa. It features architecture and design projects realised in the African continent for the last years, many from prestigious and influential architectural practices around the world, other projects which, even not been signed by world-wide known architects, are related to aspects like cooperation, development programs, vernacular, bioclimatic and sustainable architecture…concepts we really want to help getting stronger.www.apsaidal.com

Media partner: Architect Africa News NetworkThe Architect Africa Network is an autonomous built environment news and information broadcasting network focused on Architecture, Construction, Development, Urbanisation and the Human Condition; with the primary goal of being Africa’s leading business and research information system for built environment specialists.www.architectafrica.com

Media partner: Architecture SAArchitecture South Africa was established more than 30 years ago as the official journal of the South African Institute of Architects (SAIA). It is a bi-monthly publication offering insightful and well illustrated editorial written by a panel of architects appointed by the SAIA. The focus is on recently completed projects and the development of South African architecture in the context of the special demands of South African society, sustainability and increasing globalisation. Technical and practice guides are also regular features.www.businessmediamags.co.za/arch-sa


Media partner: Capital Equipment NewsCapital Equipment News is dedicated to the application of equipment and modes of transport that are used in the mining, construction, quarrying, and transport industries.www.crown.co.za/capital-equipment-news

Media partner: Construction Engineering DigestConstruction & Engineering Digest is Nigeria’s foremost publication on information centered on the built environment in Nigeria, Africa, and the world as relates to Africa.Our primary focus is to provide information and insights into the events shaping the built environment as we know it and in essence contribute to the conceptualization and implementation of policies, programs, and innovation tailored towards driving economic and infrastructural development within and around the sector.Our content targets individuals, professionals corporate bodies and government bodies with interests in the sectors that make up the built environment which includes the engineering, raw material and mining, oil and gas, property and real estate, power and energy, the environment and other related sectors.www.cedmagazineng.com

Media partner: Enterprise AfricaEnterprise Africa is written and produced by a team of journalists with a collective experience of over 30 years in business to business journalism. Every month we bring stories, from across the continent, of companies striving to make a positive difference to the industry they serve, be it through innovative cutting edge technology, entrepreneurial individuals influencing the industrial landscape, ground breaking projects and developments as well as many other inspirational pieces.The media world is evolving rapidly, technology is helping to connect people and business in an instant. We embrace this and invest heavily in our distribution channels to ensure that the publication is easy to read through a digital circulation which is accessible at your desk or on your travels through smartphone and tablet compatibility. Whilst being at the forefront of the digital push, we also retain a superb quality print run to deliver a traditional hard copy magazine every month.Our award winning editorial and design teams work tirelessly to produce the best content in the most well designed publication of its type, helping businesses of any size and stature to deliver news, and grow brands.Our readership is made up of business professionals across every industry sector in the continent. Typically decision makers such as CEO’s, directors, and senior managers read the publication regularly and with each issue reaching out to a vast audience, the coverage that Enterprise Africa offers is perfect for any business with a story to tell or a product to promote.www.enterprise-africa.net

Media partner: Construction WorldConstruction World is targeted at both the civil engineering and building industries and its content addresses the needs of relevant professional organisations, government, private industry, and suppliers of equipment, products and services. The magazine provides insight into the activities of South African companies in local and international markets by focusing on news and interviews, contracts and projects, innovations in civil engineering, products and services, and construction equipment trends. Construction World covers civil engineering, the building industry (concrete, steel and wood), and suppliers of products and equipment for the construction industry in South Africa and across Africa.www.crown.co.za/construction-world

Media partner: Construction1.com Construction1.com is the international portal for worldwide Construction Industry. This portal is an active business-to-business website for all Construction Service suppliers and their products. We bring companies worldwide together and give them opportunities to increase their international business. At the moment we have 8968 Suppliers from more the 100 countries worldwide registered at Construction1.com. The Construction Service suppliers on our portal are divided in Manufacturers, Exporters, Importers and Distributors.www.construction1.com

Media partner: Construction Review OnlineConstruction Review Magazine is a 20-year old monthly magazine which enjoys the readership of; architects, engineers, quantity surveyors, project managers, interior designers, developers, building and specialist, contractors, landscape architects and contractors, real estate agents and investors, property managers, suppliers to the construction industry, government departments and ministries: local authorities, land surveyors, financial institutions, telecommunication companies etc…www.constructionreviewonline.com is the online version of Construction Review magazine.

Partner listings


Partner listings

Media partner: EcospecifierEcospecifier is a guide to eco and health preferable products, materials and technologies for the built environment construction sector. Ecospecifier provides compelling, high-quality knowledge and creates unique sustainability metrics for innovative products that represent high value (and low impact) over their life – not only in the traditional sense, but also in the expanded sense of health, well-being and productivity of their total life, in the context of the people, buildings and systems they serve.Ecospecifier Verified Product Program ensure products have been rigorously third party assessed in accordance with the Verified Product Program Standard and all product eco claims meet ISO 14021, Consumer Law and that products are healthy and non-toxic.www.ecospecifier.co.za

Media partner: Global Africa NetworkFounded in 2004, Global Africa Network Media (Pty) Ltd (GAN) is a business-to-business print and digital media company based in Cape Town, South Africa.GAN publishes a series of 10 annual print journals profiling each of South Africa’s nine provinces as business and investment destinations, together with a national title, South African Business, an annual business and investment guide to the country.Our regional business and investment journals include Western Cape Business, Eastern Cape Business, KwaZulu-Natal Business, North West Business, Limpopo Business, Mpumalanga Business, Northern Cape Business, Gauteng Business and Free State Business. In 2019, GAN is launching the annual African Business Journal, a guide to business and investment in Africa. (View publications as e-books here) Our monthly digital newsletter, TradeInvestAfrica, promotes business, trade and investment opportunities in Africa.www.globalafricanetwork.com

Media partner: Global GreenTag AfricaIndependently verified as an ISO 14024 compliant Type 1 Eco label, Global GreenTag is a world first, third party, green building product rating system underpinned by rigorous scientific and Life Cycle Assessment (LCA), Health, Ecotoxicity, Greenhouse Gas Emission and Biodiversity assessment processes. Launched in Australia in 2010, by Ecospecifier Pty Ltd. GreenTag operates under license as Global GreenTag (Pty) Ltd in South Africa. Global GreenTag programs are formally recognised in WELL™, BREEAM International, EarthCheck®, Green Star®, LOTUS® and the Malaysian Government’s MyHIJAU program and compliant with credit requirements in LEED® (PhDs and EPDs), LOTUS (Vietnam) and BREEAM® (EPDs).www.globalgreentag.co.za

Media partner: Green Building Handbook In keeping with its mission to provide practical and applicable content and information for built environment professionals seeking to build ecologically sensitive buildings, Green Building Media has launched the Green Building handbook series which is a collection of contributions compiled into Volumes and published in a high quality A5 format. Edited by Llewellyn van Wyk of the CSIR, the Green Building Handbook Volume 1 provides readers with practical insights into green building designs, technologies, materials and solutions relevant in the South African context and the effect each has on the environmental impact of buildings.www.alive2green.com/publications/green-building-handbook/

Media partner: Green Home MagazineGHM Quarterly contains the latest thinking and most relevant information on the design, speci cation, and construction of green residential buildings in South and southern Africa Readers, such as home owners, architects, speci ers, contractors and designers are able to catch up on the latest green residential building content.alive2green.com/publicationsgreen-home-magazine/digital-subscriptions-green-home-magazine/green-home-magazine/

Media partner: HVAC&R OnlineHVAC&R Online: the only website serving Africa’s HVACR sector. HVAC news, events and product releases for heating, energy, ventilation, air conditioning and refrigeration.www.hvacronline.co.za

Media partner: IMIESA IMIESA magazine gives critical insight and information on infrastructure development, maintenance and service delivery. The related industry website www.infrastructurene.ws gives readers daily up-to-date news. It is the official magazine of the Institute of Municipal Engineering of Southern Africa (IMESA). IMIESA is published by 3S Media – 53 years of publishing excellence.www.infrastructurene.ws

Media partner: Industry NetworkerIndustry Networker is a premier international business magazine that spans continents.www.industry-networker.com


Media partner: Infrastructurene.ws Infrastructurene.ws is the digital hub for the infrastructure development, maintenance and service delivery sectors, including water and sanitation, waste and wastewater management and construction. If you’re a supplier to these sectors, this platform gives you reach into the highly targeted African market in an instant. Infrastructurene.ws is the digital home of IMIESA, ReSource and Water & Sanitation Africa and the infrastructure newsletters.www.infrastructurene.ws

Media partner: Lifting AfricaDEDICATE TO OUR LOYAL READERSLifting Africa is dedicated to providing the reader with a platform to discuss and resolve problems and issues relevant to the African lifting industry. Lifting Africa will assist the reader, with compliance to all legal and statutory requirements in the lifting industry. Our aim is to improve safety in the industry.Training is very important to the industry and ourselves. We will, therefore, focus consistently on training. This will include an annual conference covering all aspect relevant to the industry. Focus areas are case studies of previous accidents in the industry, to prevent this from happening in the future.Lifting Africa will also focus on and feature all forms of lifting; from mobile, tower, and construction cranes to overhead, under-hung, monorail, wharf and gantry type container cranes. Lifting Africa will also include features on “under the hook” equipment, lifting tackle and ancillary equipment, repairs, testing, inspection, and training companies.www.liftingafrica.co.za

Media partner: Material BiddersMaterial Bidders is an information technology company developing a web-based application at www.materialbidders.com that constitutes a platform for buyers and suppliers of construction materials worldwide for a more “efficient”, “transparent” procurement process to get the “right” material.First, buyers such as Real Estate investment companies, Contractors and even individuals can reach a larger number of suppliers and get the best prices for all their purchases.Second, manufacturers/distributors of construction materials can reach a larger number of buyers, expand their exposure to the construction market locally, regionally and globally reaching new buyers and communicate more efficiently with their existing ones.www.materialbidders.com

Media partner: Middle East Business News and MagazineMiddle East Business News and Magazine is part of Ougarit Group for Marketing. Middle East Business provides quality information about business dynamics and pertinent economic and socio-economic issues, highlights investment prospects, analyses business trends and connects private sector players within the Middle East region, and between this important region and other countries around the globe. The magazine also sheds light on gender issues related to business as well as on creative approaches by policy-makers to resolve business-related dilemmas. Middle East Business is an important economic media communication vehicle for promoting private sector-led growth in the Middle East region.Middle East Business is powered by a mobile application, website and social media. We solidified all of this with an audiovisual channel on YouTube. We are strengthened by a network of correspondents across many countries.www.middleeast-business.com

Media partner: NA-Nuevo AzulejoTrade magazine of wall and floor coverings and equipment, for architecture, interiorism and bath & kitchen.www.na.publica.es

Media partner: Plant Equipment & HirePlant Equipment & Hire is South Africa’s original earthmoving equipment magazine. Launched more than three decades ago, it has been at the forefront of supplying business people in the built environment with information, specifications and trends in equipment, vehicles and related services.www.plantonline.co.za

Media partner: Plant & EquipmentPlant & Equipment is a leading magazine and online classifieds’ website catered for the heavy equipment and truck industry. Our strategy focuses on solutions to help our sellers build a better network that allows profitable growth. With over 18 years of experience, our dedicated specialists at Plant & Equipment, pride themselves on quality customer service and a long history of relationships we have attained over the years; some of which are the most reputable names in the region.Plantandequipment.com is a truly simple, yet innovative classified website, coupled with our regional magazines to deliver a marketing solution that combines both online and print. Plant & Equipment publishes and prints 3 magazines: Plant & Equipment Middle East, Plant & Equipment Africa, and Trucks & Transport Middle East.www.Plantandequipment.com

Partner listings


Partner listings

Media partner: Plant & Equipment – AfricaPlant & Equipment Africa is a monthly magazine with over 18 years of experience! Our growing team is committed to establishing lifetime relationships and opportunities for both the seller and the buyer.We pride ourselves as being one of the leading magazine company’s in the equipment industry; with an average of over 35,000 readers a month. Our pool of contacts, network, and resources are what set us apart from any other magazine in Africa.www.plantandequipment.com

Media partner: Plumbing OnlinePlumbing Online: it’s all about the conveyance of water. This online portal offers up-to-date content on everything from water infrastructure, fire and gas installation, to mechanical and plumbing.www.plumbingafrica.co.za

Media partner: Pipes, Pumps & Valves Africa Magazine – PVPThe magazine is endorsed by SAPSDA, SAVAMA, SAPMA and VAMCOSA. The main focus of “Pipes, Pumps & Valves Africa” is to develop the pipes, pump and valves industry not only in South Africa but aims to develop the industry in all Southern African countries. Training is the main driving force in the development of the Pump and Valves Industry in Southern Africa focusing on Pump Systems as well as Seals, Electric Motors, Couplings and Drives.www.pumpsandvalves.co.za

Media partner: SA BuilderSA BUILDER is the official journal for the Master Builders SA (MBSA). Published since 1923, it offers the latest news on products, projects, personalities and developments in the building industry. The magazine is distributed to all the members of the Master Builders Associations (MBAs) in SA, as well as the Chartered Institute of Building (CIOB).www.sabuilder.co.za

Media partner: SA Affordable Housing SA Affordable Housing is grounded in the absolute conviction that every South African must have access to a home and that these homes, and the infrastructure that supports them, must be of a standard that reflects the needs, dignity and health of our citizens.SA Affordable Housing is a unique publication that is dedicated entirely to the subject of affordable housing in South Africa today and is published alternate-monthly. We address topics and issues relating directly to rural and urban infrastructure planning and development and the delivery of affordable housing.www.saaffordablehousing.co.za

Media partner: SA Building Review SA BUILDING REVIEW is a national annual resource handbook with its central focus on the identity of building products and services within the built environment in South Africa. It allows the supplier and manufacturer the opportunity to be identified and exposed in a more detailed and comprehensive manner to the building, architectural and design industry. SA BUILDING REVIEW’s main focus is on advertorial, therefore giving it a more informative and personal approach to the targeted audiences.www.sabuildingreview.co.za

Media partner: SA Business IntegratorSouth African Business Integrator is a national audited business to business publication with its focus on both the public and private sectors in southern Africa. The main focus of the publication is to synchronize business information, business cultures and align strategies and business goals between the public and private sectors. The publication serves as an interaction medium between businesses. Its main objective is to inform, educate and advise key industry leaders on business objectives, strategic decisions, good management practice and governance, sound financial management practice and ultimately bridging the gap of transformation and transparency between the public and private sector.www.sabusinessintegrator.co.za

Media partner: SA ProfileSA PROFILE is an annual reference book which offers executive support to businesses and entrepreneurs across the corporate sphere to facilitate and provide senior executive information and decision making needs by promoting their corporate or business profile to both the public and private sectors in Southern Africa.FOCUS AREA: All Business sectors and government.www.mediaxpose.co.za/publications/sa-profile


Media partner: SA RoofingSA Roofing is the leading publication for roofing industries in the country and was launched in May 2008. It covers topics and issues related to both inner and outer roofing systems and enjoys the ongoing support of the roofing industry in South Africa today.SA Roofing is a monthly magazine that aims to educate readers and industry professionals about the subject of roofing. Its editorial features exciting new projects and developments, the regulatory environment, health and safety issues and explores the complete roof – from the longest truss beam to the tiniest of fasteners.www.saroofing.co.za

Media partner: Specifile Specifile is Southern Africa’s largest website covering the architectural, engineering and construction industries. Users of the Specifile website range from architects and consulting engineers, to industry buyers, property developers, home owners, hardware stores, government departments and builders. Use Specifile to source suppliers of building products, download technical brochures and keep up to date on the latest products available in South Africa.www.specifile.co.za

Media partner: Sunday Times InfrastructureInfrastructure is a high quality annual Sunday Times supplement. It provides in-depth information on the built environment and infrastructure development, highlighting projects underway in South Africa and the rest of the continent.www.businessmediamags.co.za/built-environment/infrastructure

Media partner: The Emerging ContractorAfter 20 years of struggle for a voice on Transformation and Empowerment issues in the construction industry, we have finally launched this publication. The aim of the publication is to create a platform where stakeholders, industry partners, emerging contractors, academia, government, financial institutions, students, built environment professionals, politicians and beneficiaries of infrastructure projects can engage on matters of Transformation and Empowerment in the construction industry.It is a platform to celebrate and showcase:– Excellent project delivery work completed by emerging contractors– Pioneering Enterprise Development initiatives by many listed companies, and clients (including government and parastatals)– Innovative solutions and initiatives– Skills development initiatives

Media partner: Timber iQ Timber iQ – Design & Construction is first and foremost a trade and technical publication. It is published as an alternate-monthly A4 glossy magazine dedicated to all aspects of timber design and construction, bringing its readers relevant content that is in tune with the local market, as well as showcasing project features with international flair.Timber iQ engages industry leaders to share their expertise and insight, highlights top-class products and services in the local market, connects local trade through important industry information and company profiles, and features some of the most beautiful timber-infused architecture and design.www.timberiq.co.za

Media partner: To BuildTO BUILD is a tri-annual publication and gets printed in March, July and November. TO BUILD is ABC Certified and in conjunction with the Council for the Build Environment (CBE). Its central focus is distinct in the way it conveys information on décor and architectural trends, building technologies and projects throughout South Africa. The TO BUILD handbook’s editorial is designed to be both informative and educational, with regular features such as project reviews, interviews with leaders in the various fields and up to date news snippets.www.tobuild.co.za

Partner listings



LIKE SHARE COMMENT

DO YOU FOLLOW US?

We are the largest producer of Natural Sandstone Building Products in Southern Africa. We offer the finest sandstone resources in the Kingdom of Lesotho. We offer the most advanced stone mining technology. Our range of natural sandstones are cut to custom specifications and in standard load-bearing blocks, cladding and rivens.

Our Natural Sandstone finishes will enhance the appearance of your home and boost the value of your property.

Office: BNP Centre Suite 10, Maseru, Lesotho. P O Box15518, Maseru 100, LesothoQuarry: Lekokoaneng, Berea District, LesothoTel: +26 62 232 7485 | +26 65 888 8889 | +27 83 281 3947 Fax: +266 22327484Email: [email protected] Website: www.lesothostone.co.za

LESOTHO STONE We are the Leaders of Sandstone

11 - 13 june 2019 - africanconstructionexpo.com · required to do the work. i am excited about the...

Documents