109-a, gurdial enclave, ahluwalia colony ludhiana –...

109-A, Gurdial Enclave, Ahluwalia Colony Jamalpur, Chandigarh Road Ludhiana – 141 010 (Punjab), INDIA PH : + 9417449545 E-mail : [email protected] [email protected]

VANI IMPEX IMPORTER & EXPORTER

A complete source of All Type of Indl.Fasteners & Hardwares

Center bolts with nuts

TYPE: Round head (long & standard), Cut head, Step head, Flat

DIAMETER: 8MM to 20MM, 5/16” to 3/4"

LENGTH: 35MM to 500MM, 1-3/8” to 20”

THREAD: UNF, UNC, BSF, BSW, Metric (fine & rough)

MATERIAL: Mild Steel, EN8, EN15, EN18, EN19, AISI/SAE 1018, AISI/SAE 1045, AISI/SAE 4140

FINISH: Auto black, Zinc plated, Yellow zinc plated, Dacromet, Geomet

ISO GRADE: 4.6, 4.8, 6.8. 8.8, 10.9

U-bolts with nuts

TYPE: Round shape, Semi-Round shape, Square shape

DIAMETER: 10MM to 30MM, 3/8” to 1-1/4”

LENGTH: 100MM to 600MM, 4” to 24”

THREAD: UNF, UNC, BSF, BSW, Metric (fine & rough)

MATERIAL: Mild Steel, EN8, EN15, EN18, EN19, AISI/SAE 1018, AISI/SAE 1045, AISI/SAE 4140

FINISH: Paint, Black, Galvanized, Dacromet, Geomet

ISO GRADE: 4.6, 5.8, 6.8, 8.8, 10.9, 12.9




Spring pins / Shackle pins / Threaded pins

DIAMETER: 18MM to 50MM, 3/4" to 2” LENGTH: 75MM to 200MM, 3” to 8” MATERIAL: Mild Steel, EN8, EN15, EN18, EN19, AISI/SAE 1018, AISI/SAE 1045, AISI/SAE 4140 FINISH: Black, Ground, Galvanized ISO GRADE: 4.6, 5.8, 6.8, 8.8, 10.9

Bushes

TYPE: Plain, Grooved, Threaded OUTER DIAMETER: 24MM to 60MM, 1” to 2-3/8” INNER DIAMETER: 18MM to 50MM, 3/4” to 2” LENGTH: 40MM to 125MM, 1-1/2” to 5” MATERIAL: Steel, Bi-metal, Aluminum bronze, Gunmetal, Rubber




Shackle Assemblies

TYPE: Straight, Offset/bent SIZE:

Shackle link plate:- Length: 3” to 4-3/4”, Width: 1-1/4”, Center to Center hole: 2” to 3-1/2”

Shackle bolt:- Diameter: 1/2", 9/16”, 5/8”, 3/4”, Length: 3” to 5”

MATERIAL: Mild Steel, Alloy Steel, AISI/SAE 1045, AISI/SAE 4140 FINISH: Black, Zinc plated, Yellow zinc plated

Hub bolts / Wheel studs / T-bolts

DIAMETER: 10MM to 26MM, 3/8” to 1” LENGTH: 35MM to 150MM, 1-3/8” to 6” THREAD: UNF, UNC, BSF, BSW, Metric (fine & rough) MATERIAL: Mild Steel, EN8, EN15, EN18, EN19, AISI/SAE 1018, AISI/SAE 1045, AISI/SAE 4140 FINISH: Auto black, Zinc plated, Yellow zinc plated, Phosphated, Chrome plated, Dacromet, Geomet ISO GRADE: 4.6, 5.8, 6.8, 8.8, 10.9, 12.9




Wheel brackets

TYPE: Casting, Forging SIZE: 18MM bolt hole, 20MM bolt hole FINISH: Zinc plated

Axle studs with nuts/sleeves

DIAMETER: 8MM to 20MM, 5/16” to 3/4" LENGTH: 25MM to 100MM, 1” to 4” THREAD: UNF, UNC, BSF, BSW, Metric (fine & rough) MATERIAL: Mild Steel, EN8, EN15, AISI/SAE 1018, AISI/SAE 1045 FINISH: Autoblack, Yellow zinc plated ISO GRADE: 4.6, 4.8, 6.8. 8.8




Spring pin Cotter pin

DIAMETER: 10MM, 3/8” LENGTH: 90MM, 2-1/2”, 2-3/4” THREAD: UNF, Metric MATERIAL: Mild Steel, EN8, EN15, AISI/SAE 1018, AISI/SAE 1045 FINISH: Autoblack, Zinc plated, Yellow zinc plated ISO GRADE: 4.6, 4.8, 6.8. 8.8

Banjo bolts & Banjo tees

TYPE:

Banjo bolts - two holes, three holes, four holes Banjo tees - plain, step, threaded

SIZE: 8MM to 20MM MATERIAL: Mild Steel, EN8, EN15, AISI/SAE 1018, AISI/SAE 1045 FINISH: Zinc plated, Yellow zinc plated STANDARD: DIN 7642, DIN 7643




Grease Nipples

TYPE: Straight, 45 degree bent, 90 degree bent THREAD: Metric, UNF, BSP MATERIAL: Mild steel, free cutting steel / EN 1A FINISH: Zinc plated, Yellow zinc plated, Chrome plated, Nickel plated STANDARD: DIN 71412 / BS 1486

Hex Bolts

DIAMETER: 8MM to 50MM, 5/16” to 2” LENGTH: 25MM to 300MM, 1” to 12” THREAD: UNF, UNC, BSF, BSW, Metric (fine & rough) MATERIAL: Mild Steel, EN8, EN15, EN18, EN19, AISI/SAE 1018, AISI/SAE 1045, AISI/SAE 4140 FINISH: Natural, Black, Zinc plated, Yellow zinc plated, Hot dip galvanized, Phosphated, Chrome plated, Dacromet, Geomet ISO GRADE: 4.6, 4.8, 5.8, 8.8, 10.9, 12.9 STANDARD: DIN 931/ISO 4014/ANSI B18.2.3.1M, DIN 933/ISO 4017/ANSI B18.2.3.1M, BS 1768, BS 1083, DIN 601/ISO 4016/BS 4190, DIN 6914/ISO 7412/ANSI B18.2.3.7M, DIN 960/ISO 8765




Carriage Bolts

DIAMETER: 10MM to 20MM, 3/8” to 3/4” LENGTH: 30MM to 400MM, 1-1/4” to 16” THREAD: UNF, UNC, BSF, BSW, Metric (fine & rough) MATERIAL: Mild Steel, EN8, EN15, AISI/SAE 1018, AISI/SAE 1045 GRADE: 4.6, 4.8, 6.8, 8.8, 10.9 FINISH: Self, Black, Zinc plated, Yellow zinc plated, Dacromet, Geomet STANDARD: DIN 603, BS 4933

Flange Bolts

TYPE: Serrated (serrations under hex head), plain DIAMETER: 10MM to 20MM, 3/8” to 3/4” LENGTH: 20MM to 250MM, 3/4" to 10” THREAD: UNF, UNC, BSF, BSW, Metric (fine & rough) MATERIAL: Mild Steel, EN8, EN15, EN18, EN19, AISI/SAE 1018, AISI/SAE 1045, AISI/SAE 4140 FINISH: Natural, Black, Zinc plated, Yellow zinc plated, Hot dip galvanized, Phosphated, Dacromet, Geomet ISO GRADE: 4.6, 4.8, 5.8, 8.8, 10.9, 12.9 STANDARD: DIN 6921, ANSI B18.2.3.4M




Solid Rivets

TYPE: Round head, Countersunk head, Mushroom (oval) head DIAMETER: 3MM to 8MM LENGTH: 10MM to 55MM MATERIAL: Mild Steel, EN8, AISI/SAE 1018, AISI/SAE 1045 FINISH: Natural, Black, Zinc plated, Yellow zinc plated, Phosphated ISO GRADE: 4.6, 4.8, 5.8, 8.8 STANDARD: DIN 660, DIN 661, DIN 662, ISO R 1051

Hex nuts

TYPE: Standard hex nut, heavy hex nut SIZE: M12 to M56, 1/2” to 2-1/4” THREAD: UNF, UNC, BSF, BSW, Metric (fine & rough) MATERIAL: Mild Steel, EN8, EN15, AISI/SAE 1018, AISI/SAE 1045, AISI/SAE 4140 FINISH: Black, Zinc plated, Yellow zinc plated, Hot dip galvanized, Dacromet, Geomet ISO PROPERTY CLASS: 4, 6, 8, 10 STANDARD: DIN 555/ISO 4034, DIN 934/ISO 4032/ANSI B18.2.4.1M, DIN 6915




Self-locking & Nylon Insert lock nuts

SIZE: M10 to M60, 3/8” to 2-3/8” THREAD: UNF, UNC, BSF, BSW, Metric (fine & rough) MATERIAL: Mild Steel, EN8, AISI/SAE 1045 FINISH: Zinc plated, Yellow zinc plated, Chrome plated ISO PROPERTY CLASS: 4, 6, 8 STANDARD: DIN 980/ISO 7042/ANSI B18.16.3M, DIN 982, DIN 985

Flange Nuts

Type: Serrated, Non-serrated SIZE: M8 to M16, 5/16” to 5/8” THREAD: UNF, UNC, BSF, BSW, Metric (fine & rough) MATERIAL: Mild Steel, EN8, AISI/SAE 1018, AISI/SAE 1045 FINISH: Black, Zinc plated, Yellow zinc plated, Chrome plated ISO PROPERTY CLASS: 4, 6, 8 STANDARD: DIN 6923/ISO 4161/ANSI B18.2.4.4M




Collar Nuts

TYPE: Standard collar nut, Revolving washer collar nut SIZE: M14 to M48, 5/8” to 2” THREAD: UNF, UNC, BSF, BSW, Metric (fine & rough) MATERIAL: Mild Steel, EN8, EN15, EN18, AISI/SAE 1018, AISI/SAE 1045, AISI/SAE 4140 FINISH: Black, Zinc plated, Phosphated, Dacromet, Geomet ISO PROPERTY CLASS: 4, 6, 8, 10 STANDARD: DIN 6331

Domed cap/ Acorn lug nuts

SIZE: M12 to M30, 1/2” to 1-1/4” THREAD: UNF, UNC, BSF, BSW, Metric (fine & rough) MATERIAL: Mild Steel, EN8, EN15, AISI/SAE 1018, AISI/SAE 1045 FINISH: Zinc plated, Chrome plated ISO PROPERTY CLASS: 4, 6, 8 STANDARD: DIN 1587




Castle/Slotted nuts

SIZE: M14 to M52, 9/16” to 2” THREAD: UNF, UNC, BSF, BSW, Metric (fine & rough) MATERIAL: Mild Steel, EN8, EN15, AISI/SAE 1018, AISI/SAE 1045, AISI/SAE 4140 FINISH: Black, Zinc plated, Yellow zinc plated, Chrome plated, Hot dip galvanized, Phosphated, Dacromet, Geomet ISO PROPERTY CLASS: 4, 6, 8, 10 STANDARD: DIN 935, DIN 937, DIN 979

Hex coupling nuts

SIZE: M12 to M48, 1/2” to 2” THREAD: UNF, UNC, BSF, BSW, Metric (fine & rough) MATERIAL: Mild Steel, EN8, AISI/SAE 1018, AISI/SAE 1045 FINISH: Black, Zinc plated, Yellow zinc plated, Hot dip galvanized, Dacromet, Geomet ISO PROPERTY CLASS: 4, 6, 8 STANDARD: DIN 6334




Miscellaneous nuts such as square nuts, check nuts, spindle nuts

MATERIAL: Mild Steel, EN8, EN15, EN18, AISI/SAE 1018, AISI/SAE 1045, AISI/SAE 4140 FINISH: Black, Zinc plated, Yellow zinc plated, Hot dip galvanized, Phosphated, Dacromet, Geomet ISO PROPERTY CLASS: 4, 6, 8, 10

Plain Flat washers & Machined Washers

SIZE: M6 to M52, 1/4” to 2” MATERIAL: Mild Steel, EN8, EN15, AISI/SAE 1018, AISI/SAE 1045, Copper FINISH: Natural, Black, Zinc plated, Yellow zinc plated, Hot dip galvanized, Dacromet, Geomet STANDARD: DIN 125/ISO 7089-90, DIN 126/ISO 7091, DIN 433/ISO 7092, DIN 6340, ANSI B18.22.1




Spring washers

SIZE: M6 to M36, 1/4” to 1-1/2” MATERIAL: Mild Steel, EN8, AISI/SAE1018, AISI/SAE 1045, Copper FINISH: Black, Zinc plated, Yellow zinc plated, Hot dip galvanized, Geomet, Dacromet STANDARD: DIN 127, ANSI B18.21.1

Square washers

SIZE: M10 to M50, 3/8” to 2” MATERIAL: Mild Steel, EN8, AISI/SAE 1018, AISI/SAE 1045 FINISH: Natural, Black, Zinc plated, Yellow zinc plated, Hot dip galvanized, Dacromet, Geomet STANDARD: DIN 436




Serrated & Toothed Washers

TYPE: Internal and External lock washers SIZE: M10 to M30, 3/8” to 1-1/4” MATERIAL: Mild Steel, EN8, EN15, AISI/SAE 1018, AISI/SAE 1045 FINISH: Natural, Black, Zinc plated, Yellow zinc plated STANDARD: DIN 6797, DIN 6798

Lynch Pins

SIZE: 6MM, 8MM, 10MM, 1/4”, 5/16”, 3/8” MATERIAL: Mild Steel, EN8, AISI/SAE 1018, AISI/SAE 1045 FINISH: Black, Zinc plated, Yellow zinc plated




Accelerator Ends

SIZE: 5MM, 6MM, 8MM, 10MM, 12MM, 14MM MATERIAL: Mild Steel, EN8, AISI/SAE 1018 FINISH: Black, Galvanized

109-a, gurdial enclave, ahluwalia colony ludhiana –...

Documents