106-121

Floodlights

GE Consumer & Industrial 107Lighting


Masterpak 113

PW 114

PWBR 116

Halopak 112

EF 2000 110

Euroflood 108

V2F 118

PFE400 119


A set of three floodlights for outdoor installation, available with symmetric or asymmetric beam for 70W to 600W high-pressure sodium or metal halidelamps.Body: black fibreglass-reinforced engineering polymer thermoplastic. Thelamp operating components are mounted on a removable galvanised steel platelocated in the bottom of the insulated wiring box.Reflector: 99.85% pure anodised (s = 6-8µ) and polished aluminium withhammered finish for wide beam version and with polished finish for narrowbeam version.Cover glass: 5 mm thick (3 mm in case of EF 15) clear tempered glass. Thevisor is mounted on a black technopolymer frame hinged to the bottom ofthe body and fixed by retractable clips made from stainless steel. A siliconegasket is fitted between the body and frame.Lampholder: porcelain socket and anti-unscrew device on E27 and E40 versions; steatite cap type on Rx/s versions.Electrical supply: direct access to terminal block and cable-clamp set in thewiring box recessed into the back of fitting; PG 13.5 cable-gland. Wiring boxis sealed by a cover fixed with 4 self-threading screws.Installation: by means of zinc plated steel stirrup (of 5 mm for EF 25 and EF40 types; of 4 mm for EF 15 types) with aiming degree indicator on bothsides.

ACCESSORIESWire guard: electro-welded galvanised steel wire, fixed to the frame withself-tapping screw.

550

cd/klmV = 0.0

500

450

400

350

300

250

200

150

100

50

-80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 °

H = 0.0

EF25 250 M SM

1100

V = 0.0

1000

900

800

700

600

500

400

300

200

100

-80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 °

V = 20.0 H = 0.0cd/klm

EF15 150 M AS

1100

V = 0.0

1000

900

800

700

600

500

400

300

200

100

-80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 °

V = 20.0 H = 0.0cd/klm

EF15 70 M AS

1100

V = 0.0

1000

900

800

700

600

500

400

300

200

100

-80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 °

V = 25.0 H = 0.0cd/klm

EF25 250 M AS

550

cd/klmV = 0.0

500

450

400

350

300

250

200

150

100

50

-80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 °

H = 0.0

EF40 400 M SM

1100

V = 0.0

1000

900

800

700

600

500

400

300

200

100

-80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 °

V = 25.0 H = 0.0cd/klm

EF40 400 M AS

Euroflood

EF 15Also in white version (WH) available.


Euroflood

EF15

EF25

EF40

EFG 15 Wire guard for EF15 0,18 1 34090EFG 25 Wire guard for EF25 0,28 1 34092

EFG 40 Wire guard for EF40 0,34 1 34094

Weight Pack Qty. ProductType Description (kg) Box Code

Accessories

EF

EFV 15 Front cover glass for EF15 0,80 1 34232EFV 25 Front cover glass for EF25 0,90 1 34240

EFV 40 Front cover glass for EF40 0,97 1 34638

Spare parts

EF

AS = Asymmetric SM = Symmetric M = Metal Halide Lamp S = High-Pressure Sodium LampW = White

EF40 250 S AS LU250/T/40 10,9 1 8 33714EF40 250 S SM LU250/T/40 10,9 1 8 33716EF40 250 M AS ARC250/T/H/742/E40 11,0 1 8 33723EF40 250 M SM ARC250/T/H/742/E40 11,0 1 8 33730EF40 400 M AS ARC400/T/H/742/E40 12,1 1 8 33738EF40 400 M SM ARC400/T/H/742/E40 12,1 1 8 33740EF40 400 S AS LU400/T/40 12,1 1 8 33731EF40 400 S SM LU400/T/40 12,1 1 8 33734EF40 600 S SM LU600/HO/T/40 13,9 1 8 33743

Weight Pack Qty. ProductType Lamp (kg) Box Pallet Code

EF 40 Class: IP 65230V 50Hz CEI 34.21 / EN 60598-1, IEC 598

Complete with lamp.

Complete with lamp.

Complete with lamp.

EF25 150 S AS LU150/T/40 8,40 1 16 33697EF25 150 S SM LU150/T/40 8,40 1 16 33698EF25 250 S AS LU250/T/40 9,50 1 16 33704EF25 250 S SM LU250/T/40 9,50 1 16 33705EF25 250 M AS ARC250/T/H/742/E40 9,50 1 16 33710EF25 250 M SM ARC250/T/H/742/E40 9,50 1 16 33713


EF15 70 M AS ARC70/TD/742/RX7S 5,80 1 30 33691EF15 150 M ASARC150/TD/742/RX7S 7,10 1 30 33695EF15 70 S AS LU70/90/T12/27 5,80 1 30 33690EF15 100 M ASMXR100/U/27 6,20 1 30 33692


Complete with lamp.

EF15 70 W CMH70/TD/UVC/942/Rx7s 5,80 1 30 38972EF15 150 W CMH150/TD/UVC/942/Rx7s-24 7,10 1 30 38973



EF 2000

EF 2000 floodlight family for outdoor installation, with 2000W double-endedmetal halide lamps with ceramic caps or max. 2000W tubular bulb metal halide or high pressure sodium lamps with E40 caps. The lamp operating components are to be installed separately, except the starter, which is integrated into the floodlight unless otherwise noted.Designed for the illumination of large areas, EF 2000 luminaires are especiallysuitable for large sporting facilities where excellent illumination, perfect beamcontrol and optimum colour rendering are required for colour TV recording andbroadcasting.Body: die-cast UNI 5076 aluminium with RAL 7038 grey polyester powder paintfinish. Painting is done by up-to-date DC galvanization process to maximiseanti-corrosive properties.A hinged door at the rear of the body allows access to the lamp without needto remove the front cover glass. The door is equipped with a circuit-breaker,which cuts off the lamp voltage at opening.All the external screws are made of stainless steel.Control gearbox: fibreglass-reinforced polyamid, mechanically fixed to therear part of body. Its cover is fixed by 4 stainless steel screws and providedwith a PG 13.5 cable-gland for entering the electrical supply cables of 9-13mm.Cover glass: 4 mm thick clear tempered glass, resistant against thermal andmechanical shocks. The visor is fixed to the die-cast aluminium frame paintedgalvanically like the body. An anti-aging silicone gasket is fitted between thebody and frame.Orientation: by means of a graduated scale for correct aiming of the luminaire.Reflector: 99.85% pure anodised and polished aluminium, available for variouslight distributions: • rectangular beam, spot and flood in case of E40 capped lamps• conical beam, ultra spot, spot, medium, medium-wide & wide in case of double-ended lamps.The reflector has an internal louvre, which provides excellent light pollution andglare control.Lampholder: ceramic, with clips to keep the lamp fixed in position.Installation: by steel bracket painted like the body and provided with 3 mounting holes,2 ( Ø 15 mm) for the lateral and 1 ( Ø 22 mm) for central mounting.Burning position of the lamp axis: horizontal ±4° for double-ended types; anyfor E40 cap types.Power supply box CSA: V0 self-extinguishing thermoset material.Caution: Standard version of luminaire must not be operated at angles of inclination higher then 140° in relation to the vertical axis. In case of higherdegrees of inclination or HOT RESTRIKE (HR) types, please contact GE SalesOffice.

Ø15 Ø22 Ø15


EF 2000

Caution: Standard version of luminaire must not be operated at angles of inclination higher than 140° in relation to the vertical axis. In case of higher degrees of inclination, please contact GE Sales Office.

CSAM2000 LPF CSAM1000

CSAM2000HR

EF2 US 2000 ULTRASPOT HSI TD 2000/D 0,295 Ultra-Spot 15,90 1 4 92634

EF2 S 2000 SPOT HSI TD 2000/D 0,295 Spot 15,90 1 4 92306

EF2 M 2000 MEDIUM HSI TD 2000/D 0,295 Medium 15,90 1 4 92307

EF2 MW 2000 MEDIUMWIDE HSI TD 2000/D 0,295 Medium-Wide 15,90 1 4 92635

EF2 W 2000 WIDE HSI TD 2000/D 0,295 Wide 15,90 1 4 92308

Surfaces Exposed Beam Weight Pack Qty. ProductType Lamp to Wind (m2) (kg) Box Pallet Code

EF 2000 Class: IP 65400V 50Hz CEI 34.21 / EN 60598-1 / IEC 598

Complete with lamp.

CSA CSP IM 2400 HPF 2000W 10,3A 400V SPL2000/I/T/H/960/E40 & HSI-TD2000/D IP66 19,00 1 56 92747

CSAM2000 LPF 2000W 10,3A 400V SPL2000/I/T/H/960/E40 & HSI-TD2000/D IP66 16,90 1 80 92721

CSAM1000 1000W HPF 230V SPL1000/T/H/960/E40 & LU1000/T/40 IP65 12,20 1 90 92722

CSAM2000HR HPF 10,3A 400V HSI-TD 2000/D/special 22,10 1 16 92727

Weight Pack Qty. ProductType Lamp (kg) Box Pallet Code

Power Supply Box CSA Class: IP 65

REATM2000 2000W 10,3A 400V SPL2000/I/T/H/960/E40 & HSI-TD2000/D Standard 17,1 1 96 91195

REATM1000 1000W 230V SPL1000/T/H/960/E40 & LU1000/T/40 Standard 10,2 1 96 91204

Ballasts

COND 60 mF 450V 2000W 1 960 92728

COND 2 x 45 mF 250V MH 1000W 1 960 7002190

Capacitors for LPF versions

EF2 US 2000 HR ULTRASPOT HSI TD 2000/D/special 0,295 Ultra-Spot 15,70 1 4 92760

EF2 S 2000 HR SPOT HSI TD 2000/D/special 0,295 Spot 15,70 1 4 92758

EF2 M 2000 HR MEDIUM HSI TD 2000/D/special 0,295 Medium 15,70 1 4 92757

EF2 MW 2000 HR MEDIUMWIDE HSI TD 2000/D/special 0,295 Medium-Wide 15,70 1 4 92726

EF2 W 2000 HR WIDE HSI TD 2000/D/special 0,295 Wide 15,70 1 4 92759

EF 2000 HOT RESTRIKE Class: IP 65400V 50Hz CEI 34.21 / EN 60598-1 / IEC 598

Complete with lamp.

EF2E40 M 2000M MEDIUM* SPL2000/I/T/H/960/E40 Medium 15,90 1 4 92309

EF2E40 M 1000M MEDIUM SPL1000/T/H/960/E40 Medium 15,90 1 4 92310

EF2E40 M 1000S MEDIUM LU1000/T/40 Medium 15,90 1 4 92311

EF2E40 W 2000M WIDE* SPL2000/I/T/H/960/E40 Wide 15,90 1 4 92312

EF2E40 W 1000M WIDE SPL1000/T/H/960/E40 Wide 15,90 1 4 92313

EF 2000 E40 Class: IP 65230 - 400V 50Hz CEI 34.21 / EN 60598-1 / IEC 598

*Without starter – Complete with lamp.

EF2RX M 2000M MEDIUM MBIL2000/L/H/652/special Medium 15,90 1 4 92316

EF2RX W 2000M WIDE MBIL2000/L/H/652/special Wide 15,90 1 4 92315

EF 2000 RX Class: IP 65400V 50Hz CEI 34.21 / EN 60598-1 / IEC 598

Complete with lamp.

LOR 84,46%

CSA CSP IM 2400

LOR 83,76%


WH = White BK = Black

HALOPAK

Symmetrical beam floodlights for R7s-15 cap linear halogen lamps from 150Wto 1500W.Body: die-cast aluminium with powder paint finish with stainless steel externalscrew and galvanised steel interior.Front cover glass: 5 mm toughened glass mounted on die-cast aluminiumframe with painted finish; silicon rubber seal.Reflector: symmetrical, in 99.8% pure polished anodised aluminium with hammered finish.Lampholder: ceramic.Control gearbox: fibreglass-reinforced nylon, mounted on rear of luminairebody; contains three-pole nylon terminal block and cable clamp.Installation: by galvanised steel bracket.Lamp position: horizontal ± 4°.

VHA 1 Front cover glass for HALOPAK 1 1 34228




PTL HAL 10/15 Lampholder for HALOPAK 1000 and 1500 1 31366

HALOPAK 1 BK K12 150W 78,3 mm 0,024 0,55 24 288 37181

HALOPAK 1 WH K12 150W 78,3 mm 0,024 0,55 24 288 37187

HALOPAK 3 BK K9 300W 117,0 mm 0,030 0,97 12 144 34588

HALOPAK 3 WH K9 300W 117,0 mm 0,030 0,97 12 144 34593

HALOPAK 1000 K4 1000W 189,1 mm 0,082 3,60 1 40 30637

HALOPAK 1500 K5 1500W 236,1 mm 0,099 4,00 1 40 30645

Surfaces Exposed Weight Pack Qty. ProductType Lamp to Wind (m2) Beam (kg) Box Pallet Code

HALOPAK Class: I IP 55230V 50Hz CEI 34.21 / EN 60598-1

Complete with lamp.

Pack ProductType Description Qty. Code

HALOPAKSpare parts

Ø

Dimensions (mm)Type A B C D

HALOPAK 1 139 98 96 178

HALOPAK 3 185 151 139 246HALOPAK 1000 345 230 180 365

HALOPAK 1500 408 230 180 365

V = 0.0 H = 0.0

825

750

675

600

525

450

375

300

225

150

75

-80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 °

cd/klm

HALOPAK 1500

V = 0.0 H = 0.0

1100

1000

900

800

700

600

500

400

300

200

100

-80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 °

cd/klm

HALOPAK 1000


V = 0.0 H = 0.0

1100

1000

900

800

700

600

500

400

300

200

100

-80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 °

cd/klm

MASTERPAK 70

MASTERPAK

326

140

153 182

3 x Ø9

68

MASTERPAK 70 ARC70/TD/Rx7s 81 0,042 3,15 1 30727

Tot. Absorbed Surfaces Exposed Weight Pack ProductType Lamp Power (W) to Wind (m2) (kg) Qty. Code

MASTERPAK Class: I IP 55230V 50Hz CEI 34.21 / EN 60598-1

Symmetrical beam floodlight for ARC70/TD/Rx7s double-ended metal halidelamps with Rx7s cap, to be installed on normally inflammable surfaces.Auxiliary equipment is contained in power supply box attached at the rear of fitting.Body: die-cast aluminium with black polyurethane powder painted finish.Front cover glass: toughened glass mounted in die-cast aluminium frame withpainted finish; silicon rubber seal.Reflector: symmetrical, in 99.8% pure polished anodised aluminium with hammered finish.Lampholder: porcelain.Power supply box: black fibreglass-reinforced nylon, complete with PG 11cable clamp; mechanically fixed to the body by stainless steel screws. Cover ishinged. The power supply unit fixed to removable galvanised steel plate.Installation: by galvanised steel bracket with black painted finish.Lamp position: horizontal ± 45°.

VHA 5 Front cover glass 1 7002511

PTL MTK 70 Lampholder 1 31057

GUAR HAL 501 Seal 1 31125

Pack ProductType Description Qty. Code

MASTERPAKSpare parts


PW

DESCRIPTIONSFloodlight with integrated ballast for single-ended high pressure sodium ormetal halide lamps. Maximum rating of 1650W and multiple circular beamopticals are available, from very narrow to very wide, thus permitting optimised illumination designs with minimal light dispersion.

APPLICATIONSSports lighting and extensive areas such as stadiums, recreational areas, airport aprons, racecourses, open-air car parks, etc. High-roofed large premises such as sports pavilions. Architectural lighting of buildings andmonuments.


PW

TECHNICAL CHARACTERISTICSCompact design, with ballast and lamp holder fixture in one single die-castaluminium housing, electrostatically sprayed with a RAL7035 grey polyesterpowder paint finish, following anti-corrosion priming, and oven cured at180ºC. | Filtered optical system, comprising a circular aluminium reflector,with five different designs for distinct beam cut-offs, and a flat temperedglass lens, attached to the reflector by a hinged metallic rim with stainlesssteel latches, for tool-less access. | Silicone gasket between glass lens andreflector and between the latter and the lamp holder fixture. | Tool-lessaccess to the lamp, from the front of the floodlight. | Aiming via foldingsight, built into the ballast compartment.. | Mounting by way of heavygauge steel trunnion with aiming degree indicator and locking plate systemfor securing the tilt angle. | 230V integrated ballast in high power factor.(Optional remote ballast fitting). The control gear is accessible from the frontof the floodlight, by removing the housing’s aluminium cover. | Insulation:Class I. | Approx. weight with ballast: 17 to 21 kg. | Effective projectedarea: 0.3m2 for 584mm diameter reflectors and 0.25m2 for 526mm diameterreflectors. | Notes: | The floodlight can incorporate an outer housing for thereflector, manufactured in heavy-duty spun aluminium. HD option. | Thefloodlight can be supplied with a longer trunnion for pendant mounting. Consult us. | The floodlight may incorporate a fuse. FUS option.


PWBR

DESCRIPTIONThis floodlight is characterised by its external and/or internal louvre cut-offsystems that ensure total control of direct glare. With integrated ballastcompartment for si ngle-ended high-pressure sodium vapour and metal halide lamps. Suitable up to a maximum of 1650W.

APPLICATIONSIllumination of sports facilities, monuments and extensive areas where it isessential to limit glare and spill light towards spectators, pedestrians or neighbours, e.g. in stadiums, recreational areas and sports centres.


PWBR

For HP sodium lamps up to 1000W and metal halide lamps up to 1650W.Compact design, with the ballast compartment and lamp holder in one single die-cast aluminium element, electrostatically sprayed with a RAL7035grey polyester powder paint finish, following anti-corrosion priming, andoven cured at 180ºC.Filtered optical system, formed by a circular aluminium reflector, with different designs for distinct beam openings, and a flat tempered glass lensattached to the reflector by a hinged metallic rim and stainless steel latches,for tool-less opening.Five types of external visors and internal louvres for glare control, rigidlyfixed to the glass lens.Silicone gaskets between glass lens and reflector and between the latter andthe lamp holder housing.Tool-less access to the lamp from the front of the floodlight.Aiming by way of a folding sight, integrated in the ballast compartment.Mounting via heavy gauge steel trunnion with aiming degree indicator and alocking plate system for securing the tilt angle.Integrated control gear, at 230V in high-power factor version. (Remote ballast mounting is optional). The control gear is accessible from the front ofthe floodlight, after withdrawing the ballast compartment aluminium cover.Insulation: Class I.Approx. weight with ballast: 25 to 29kg.Effective projected area: 0.37 m2 for all assemblies, except the VIN modelwith a surface area of 0.25 m2.Notes: The floodlight may incorporate an outer housing for the reflector, manufactured in heavy-duty spun aluminium. HD option.The floodlight can also be supplied with a longer trunnion for pendant mounting. Enquire.The floodlight may incorporate a fuse. FUS option.


V2F TUNNEL

ApplicationsTunnel, underpass, security, façade and traffic sign lighting. Suitable for verticaland horizontal mounting.

Features• Suitable for wet locations, IP65• Die-cast aluminium housing and door, with grey polyester powder paint finish• Front opening with access via hinged and removable door, with external baillatch• Enclosed, gasketed and charcoal filtered• ALGLAS finish on hydroformed aluminium reflector• Borosilicate prismatic square glass enclosure• Surface mounted through back with 3/4” threaded conduit

V2F VP DA 100 S HPS 100W 15,00 1 6 17352

V2F VP DA 150 S HPS 150W 16,00 1 6 17353

V2F VP DA 250 S HPS 250W 17,50 1 6 17354

V2F VP DA 400 S HPS 400W 19,00 1 6 17356

Lamp Lamp Weight Pack Pallet ProductType type Wattage (Kg) Qty Qty Code

V2F Class: I IP 65Borosilicate Prismatic Square Glass / White Distribution 230V 50Hz


PFE400 TUNNEL

PFE400 COUNTERBEAM AND SYMMETRICALApplications Tunnels and underpass. For ceiling mounting.Features* Suitable for wet locations, IP65* Die-cast aluminium housing and door, with black polyester powder paintfinish* Front opening, with access via hinged and removable door* Tempered flat glass* ALGLAS finish on hydroformed aluminium reflector* Available in Counterbeam and Symmetrical photometric distribution* Low glare, optimised for tunnel application

PFE400 V2F AND 6X6Applications Tunnels and underpass. For ceiling mounting.Features* Suitable for wet locations, IP65* Die-cast aluminium housing and door, with black polyester powder paintfinish* Front opening with access via hinged and removable door* Tempered flat glass* ALGLAS finish on hydroformed aluminium reflector* Available in 2 optics , 6x6 and V2F/DA

PFE400 CBM 250 HPS 250W 15,50 1 8 17302

PFE400 CBM 400 HPS 400W 17,00 1 8 17303

Lamp Weight Pack Pallet ProductType Type (Kg) Qty Qty Code

PFE400 Counterbeam (Asymetric) Class: I IP 65230V 50Hz

Lamp Excluded

PFE400 6x6 250W HPS HPS 250W 15,50 1 8 17320

PFE400 6x6 400W HPS HPS 400W 17,00 1 8 17321

PFE400 6x6 Class: I IP 65230V 50Hz

Lamp Excluded

PFE400 SYM 70 HPS 70W 12,50 1 8 17304

PFE400 SYM 100 HPS 100W 13,00 1 8 17305

PFE400 SYM 150 HPS 150W 14,00 1 8 17306

PFE400 Symetric Class: I IP 65230V 50Hz

Lamp Excluded

PFE400 V2F 100W HPS HPS 100W 13,00 1 8 17316

PFE400 V2F 150W HPS HPS 150W 14,00 1 8 17317

PFE400 V2F 250W HPS HPS 250W 15,50 1 8 17318

PFE400 V2F 400W HPS HPS 400W 17,00 1 8 17319

PFE400 V2F (Wide distribution) Class: I IP 65230V 50Hz

Lamp Excluded


PFE-400

DESCRIPTIONFloodlight with integrated ballast for single-ended mercury vapour, HPsodium and metal halide lamps up to 750W. The various highly efficient opticals available provide multiple light beam patterns, from narrow to verywide.

APPLICATIONSFor sports tracks and installations, open-air car parks, building facades,railway platforms, storage areas, motorway junctions, etc.


PFE-400

TECHNICAL CHARACTERISTICSHousing in two parts (housing and door) in die-cast aluminium, electrostatically sprayed with a polyester powder paint finish, fol-lowing anti-corrosion priming, and oven cured at 180ºC. | Standard colour: RAL 9011 black. Enquire for other colour options. |Faceted or smooth aluminium reflectors (four types) for different photometric distributions. | Flat tempered glass lens sealed withsilicone to the door. | Hinged, detachable access door. | Extruded EPDM gasket between housing and door. | Electrical unit fittedto removable tray. | Front access to lamp and control gear. | Screw opening of luminaire. Optional tool-less opening by means of astainless steel latch (R). | Mounting by way of heavy-gauge steel trunnion with aiming degree indicator. | Aiming sight. | PG-13.5cable gland. Optional fitting of second cable gland. | Degree of protection: IP66. | Insulation: Class I. | Effective projected area =0.23 m2. | Approx. weight with ballast: 15 to 23 kg | Notes: | A bi-power system can be fitted to the mercury vapour or high pres-sure sodium vapour lamps up to 400W | Two sodium vapour or metal halide lamps up to 2x250W may be fitted. Consult photome-try table. | The floodlight may be fitted with a fuse. FUS option. | See other applications in the section on tunnel luminaires.

106-121

Documents