100% SYNTHETIC FORMULA

MPT® High PerformanceMotor Oils –Made in the USA

The highest quality polyol ester and polyalphaolefin basestocks areblended with the finest additives, including higher levels of zinc andphosphorous, to provide the maximum protection available for highperformance applications and extended drain intervals.MPT HighPerformance Motor Oils provide much less evaporation loss thanpetroleums and most comparable viscosity synthetics which resultsin better engine efficiency by reducing oil consumption and wear. Thesuperior blend of polyol ester and polyalphaolefin basestocks fortifiedwith antioxidants and friction reducing additives provide: better oil filmthickness, better ability to pump, better thermal stability, betteroxidation resistance, better acid neutralization and a lower coefficientof friction than comparable grade synthetics or petroleum.Additionally,MPT High Performance Motor Oils have a naturally high detergencyresulting in the ability to provide engine cleanliness and wear protectionfor extended drain intervals.MPT High Performance Motor Oils areformulated to meet or exceed the requirements of the major car, truck,motorcycle, and marine engine manufacturers.

MPT High Performance Motor Oil is available in threedifferent formulas:

MPT Thirty-K: The maximum protection available for high performanceapplications and extended drain intervals up to 30,000 miles or one yearin well maintained vehicles. Vehicles with motors subjected to severeconditions such as stop and go driving, frequent short trips, turbo/superchargers and high performance modifications can be run up to 15,000miles or one year. Follow the manufacturers’ recommendations for oilfilter changes.

MPT Motorcycle: Specifically designed for high revving, high heatapplications with high levels of zinc and phosphorous for superioranti-wear protection. Special friction modifiers provide safe use withmotorcycle wet clutches.

MPT Racing: Our special race formula provides superior anti-wearprotection, stability and film strength under the most severe racingconditions. Please note that the low level of detergents in the raceformula make it unsuitable for street applications.

All MPT High Performance Motor Oils are available in convenient,easy-pour quart bottles, individually or in “6-Pack” and “12-Pack”cartons. Also available in gallon bottles, individually or in “4-Pack”cartons, as well as 5-gallon pails.

MPT® High Performance Motor Oils are 100% synthetic formulas which contains no petroleum (No Group I, II,or III base oils) or viscosity modifiers that can prematurely break down and cause wear.

Post Office Box 6181

West Caldwell, NJ 07007-6181

Phone: 973.989.9220 / Fax: 973.989.9234

www.mptindustries.com © 2013- MPT Industries. All rights reserved. MPT® is a registered trademark of MPT Industries.

MPTI-13005 Motor Oil Product Sheet mv1:AUTC-99/005 mv1 Letterhead 5/9/13 11:11 AM Page 1

© 2013 - MPT Industries. All rights reserved. MPT® is a registered trademark of MPT Industries.

Noack Evaporation Loss1 hour @ 250 degrees C

The Noack Method tests for the evaporation loss oflubricants in high temperature service. The more motor oilsvaporize, the thicker and heavier they become, contributing

to poor circulation, reduced fuel economy and increasedoil consumption, wear and emissions. (Source: Wikipedia)

Testing conducted by an accredited independent testing lab.

Lower numbers are better.

MPTThirty-K

5W30

RedlineSynthetic

5W30

AmsoilSignature

Series5W30

Mobil 1Extended

Performance5W30

RoyalPurple5W30

*Amsoil and Red Line figures taken from their respective websites on 4/10/13.

Pe

rce

nt

We

ight

Lo

ss

10%

8%

6%

4%

2%

5.4%6.0%*

6.9%*

8.9%

10.2%

High Temperature/High Shear ViscosityHTHS Viscosity cP @ 150 degrees C

The High Temperature/High Shear (HTHS) Test measures alubricant’s viscosity under severe high temperature and

shear conditions. Motor oils offer better protection when theviscosity does not decrease under high temperature.

Even a small difference in HTHS viscosity can make a big difference inengine protection. The higher the viscosity, the better the protection.

Testing conducted by an accredited independent testing lab.

Higher numbers are better.

AmsoilSignature

Series5W30

Mobil 1Extended

Performance5W30

RoyalPurple5W30

RedlineSynthetic

5W30

MPTThirty-K

5W30

*Amsoil and Red Line figures taken from their respective websites on 4/10/13.

Vis

co

sity

cS

t

4.0

3.5

3.0

2.5

3.20*3.28 3.35

3.80*

3.90

MPT® High PerformanceMotor Oils – Made in the USA

Advanced True Synthetic Lubricants

MPT Thirty-K 5W30Beats The Competition

Most synthetic motor oils evaporate and thin under high heat and high shear conditions. This is where thesuperior basestocks of MPT Thirty-K, MPT Motorcycle and MPT Racing Oil excel. The charts below show howMPT Thirty-K, in this example with 5W30, beats the competition in evaporation loss and high temperature/highshear tests. These tests are true indicators of the ability of a motor oil to reduce heat, friction and wear in highperformance engines.

MPTI-13005 Motor Oil Product Sheet mv1:AUTC-99/005 mv1 Letterhead 5/9/13 11:11 AM Page 2