100mm lens adaptor for olympus 7-14mm
TRANSCRIPT
![Page 1: 100mm Lens Adaptor for Olympus 7-14mm](https://reader036.vdocuments.site/reader036/viewer/2022062503/587b934c1a28ab4e4f8b5ac1/html5/thumbnails/1.jpg)
LEE Filters 100mm SystemOlympus 7-14mm Pro f2.8 lens adaptor
Assembly Instructions
![Page 2: 100mm Lens Adaptor for Olympus 7-14mm](https://reader036.vdocuments.site/reader036/viewer/2022062503/587b934c1a28ab4e4f8b5ac1/html5/thumbnails/2.jpg)
The Lens Adaptor is made up of three rings:1. Front Ring (with 4 positioning lugs)2. Compression Ring (blue)3. Locking Ring (fluted)All three rings are supplied screwed together, unscrew from each other before assembly.
Stage 1
To fix the Lens Adaptor, the lens must be off the camera.- once fitted, it can be left permanently in place.
![Page 3: 100mm Lens Adaptor for Olympus 7-14mm](https://reader036.vdocuments.site/reader036/viewer/2022062503/587b934c1a28ab4e4f8b5ac1/html5/thumbnails/3.jpg)
Before attaching to the lens, place the locking ring over the blue compression ring.
Stage 2
1
2
![Page 4: 100mm Lens Adaptor for Olympus 7-14mm](https://reader036.vdocuments.site/reader036/viewer/2022062503/587b934c1a28ab4e4f8b5ac1/html5/thumbnails/4.jpg)
Position the front ring, with the lugs nearest to the lens – the ring will only fit correctly in one orientation as the lugs are asymmetric.
Stage 3
1 2
![Page 5: 100mm Lens Adaptor for Olympus 7-14mm](https://reader036.vdocuments.site/reader036/viewer/2022062503/587b934c1a28ab4e4f8b5ac1/html5/thumbnails/5.jpg)
You now need to turn the lens face down; this is easier to achieve if you use the original cap to pin the front ring in position.
Note: the cap will not lock in place, it merely holds the front ring in the correct position for stage 5.
Stage 4
1 2
![Page 6: 100mm Lens Adaptor for Olympus 7-14mm](https://reader036.vdocuments.site/reader036/viewer/2022062503/587b934c1a28ab4e4f8b5ac1/html5/thumbnails/6.jpg)
Introduce the locking ring and compression ring from the rear of the lens while still holding the lens by the cap.
Stage 5
You should then be able to tighten the lock ring onto the front ring – do this until finger tight, there is no need to use excessive force and the ring should then be locked in place with no movement or slack. 2
1
![Page 7: 100mm Lens Adaptor for Olympus 7-14mm](https://reader036.vdocuments.site/reader036/viewer/2022062503/587b934c1a28ab4e4f8b5ac1/html5/thumbnails/7.jpg)
You are now ready to attach the LEE filter holder when needed.
When finished, use the white LEE lens cap (supplied) to protect the front element of the lens.
Stage 6
![Page 8: 100mm Lens Adaptor for Olympus 7-14mm](https://reader036.vdocuments.site/reader036/viewer/2022062503/587b934c1a28ab4e4f8b5ac1/html5/thumbnails/8.jpg)