100+ attendees 6+ networking hours 20+ industry experts printing in healthcare... · • prof. dr....

6
MARKETS ANDMARKETS

Upload: vudiep

Post on 26-Mar-2018

219 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: 100+ Attendees 6+ Networking Hours 20+ Industry Experts printing in Healthcare... · • Prof. Dr. Jules Poukens, Cranio-maxillofacial Surgeon, Zuyderland Medical Center ... ensures

100+ Attendees

6+ Networking Hours

20+ Industry Experts

MARKETSANDMARKETS

Postshow Report 2016

Page 2: 100+ Attendees 6+ Networking Hours 20+ Industry Experts printing in Healthcare... · • Prof. Dr. Jules Poukens, Cranio-maxillofacial Surgeon, Zuyderland Medical Center ... ensures

3D Printing in Healthcare Conference was held on 20th & 21st of October, 2016 in Amsterdam Marriott Hotel, Amsterdam, The Netherlands attracted professionals and academia from across the globe to discuss the ongoing challenges to incorporate 3D printing as a tool in treating the patients with successful case studies from top hospitals in Europe.

This 2 days conference witnessed over 100+ professionals from hospitals and clinics to discuss the latest trends in adoption of 3D printing and shared the best practices.

• Prof. Dr. Jules Poukens, Cranio-maxillofacial Surgeon, Zuyderland Medical Center, The Netherlands and Dr. Bon Verweij, Neurosurgeon, UMC Utrecht, The Netherlands were the Chair of the 2-day conference

• Opining keynote was presented by Prof. Yijin Ren, Director, W.J. Kolff Institute for Biomedical Engineering and Materials Science, University Medical Center Groningen, The Netherlands on ‘3D-Printable Antimicrobial Composite Resins.’

Event Overview:

Event Highlights:

Page 3: 100+ Attendees 6+ Networking Hours 20+ Industry Experts printing in Healthcare... · • Prof. Dr. Jules Poukens, Cranio-maxillofacial Surgeon, Zuyderland Medical Center ... ensures

Supporting Associations:

Sponsors/Exhibitors:

Media Partners:

Page 4: 100+ Attendees 6+ Networking Hours 20+ Industry Experts printing in Healthcare... · • Prof. Dr. Jules Poukens, Cranio-maxillofacial Surgeon, Zuyderland Medical Center ... ensures

Speaker Panel:

Prof. Dr. Raphael OlszewskiHead of Oral and Maxillofacial surgery research Lab, Université catholique de Louvain, Belgium

Daniel CrawfordCEOAxial3D Limited, UK

Dr. Joerd van der MeerEndodontist, University Medical Center Groningen, Netherlands

Amir A. ZadpoorDirector of the Additive Manufacturing Lab, Delft University of Technology, Netherlands

Dr. Arnold Gillner

Director, Fraunhofer Institute

for Laser Technology, Germany

Prof. Dr. Jules PoukensCranio-maxillofacial Surgeon Zuyderland Medical Center, Netherlands

Dr. Bon VerweijNeurosurgeon, UMC Utrecht, Netherlands

Prof. Dr. Nico Verdonschot, Director of Biomechanics, Radboud University Nijmegen Medical Centre, Netherlands

Dr.med.dent Jan WolffHead of the 3D Innovation Lab, VU University Medical Center, Netherlands

Dr. Boyd Goldie

Consultant Orthopaedic Surgeon,

Holly House Hospital, UK

Prof. Yijin RenDirector, W.J. Kolff Institute for Biomedical Engineering & Materials Science, University Medical Center Groningen (UMCG)

Dr. Matthieu De BeuleProfessor of Biomechanics, Ghent University

Prof. Dr. Daniel WismeijerHead of the department FRT, Academic Centrum for Dentistry Amsterdam, Netherlands

Dr. Jan-Thorsten Schantz, Senior Executive Plastic Surgeon, Department of Plastic and Hand Surgery, Technische Universitaet Muenchen, Germany

Dr. Thomas MaalCoordinator 3D Lab, Academic Medical Centre (AMC), Netherlands

Dr. Mike BemelmanOrthopaedic SurgeonSt. Elisabeth Hospital, Tilburg, Netherlands

Prof. Dr. Ivo Lambrichts

Vice Dean, Faculty of Medicine,

University Hasselt, Belgium

Dr. Chris ArtsSurgeon, Department of Orthopaedic Surgery, Maastricht University Medical Centre

Dr. Iwan DobbeResearcher, Biomedical Engineering & Physics Department, Academic Medical Center, Netherlands

Dr. Lars BrouwersPhD-studentSt. Elisabeth Hospital, Netherlands

Page 5: 100+ Attendees 6+ Networking Hours 20+ Industry Experts printing in Healthcare... · • Prof. Dr. Jules Poukens, Cranio-maxillofacial Surgeon, Zuyderland Medical Center ... ensures

“In my opinion, it was a great conference. I really enjoyed all the presentation “

-Mohammad AhmadiTU Delft, The Netherlands

“It was very interesting to hear the different positions and there is obviously no general route in this approach to bring this technology into clinical practice. So it is very worth to continue our discussions from the conference into the future”

-Dr. Arnold GillnerDirector, Fraunhofer Institute for Laser Technology, Germany

“The best thing was openness of the delegates and speakers to share and discuss the subject. Something that may have not been possible in a larger conference”

-Rowland GardnerHead of Dental/Maxilofacial Technical Services, King’s College Hospital NHS Foundation Trust, UK

Testimonials:

Attendees 2016

• Åbo Akademi University

• Academic Centre for Dentistry Amsterdam

• Academic Medical Center, University of

Amsterdam

• ACTA

• ACTA VU University

• ACTA, VU University

• AMC

• Axial3D

• AZ Sint-Jain Brugge

• Bokhout & Prahl Orthodontisten

• CADskills

• Cavendish Imaging & Cavendish Implants

• CHU de Liège

• Cliniques Universitaires saint Luc

• Université catholique de Louvain

• OMFS-IMPATH Research Group

• UZ Leuven

• Dundee Dental Hospital

• Eindhoven University of Technology

• Epworth Hospital

• Erasmus MC

• Eskisehir Osmangazi University

• Fraunhofer

• Gent University

• Ghent University

• Gothenburg University

• Henri Mondor Hospital, Maxillo-facial and

Plastic Department

• Hospital Ambroise Paré

• Image Sciences Institute (UMC Utretch)

• Inselspital Department of Emergency

Medicine Bern Schweiz

• Katholieke Universiteit Leuven

• King’s College Hospital

• King’s College London Dental

Institute

• Leiden University Medical Center

• LUMC

• Maastricht UMC+

• Materialise NV

• MRIguidance BV

• Netwerk Acute Zorg Brabant

• Newcastle NHS Trust

• NHS Lanarkshire

• NHS Tayside

• OMFS-IMPATH, KULeuven

• Private

• Radboudumc Nijmegen

• St Georges Hospital

• St. Elisabeth Hospital

• Technische Universitaet Muenchen

• The Sahlgrenska Academy

• Gothenburg University

• TU Munich

• TUDelft

• UMC Utrecht

• UMCG

• University Hasselt

• University Hasselt and Leuven

• University Hospital Antwerp

• University Medical Center Groningen

• University of Amsterdam

• University of Leeds

• Vumc

• Xilloc

Page 6: 100+ Attendees 6+ Networking Hours 20+ Industry Experts printing in Healthcare... · • Prof. Dr. Jules Poukens, Cranio-maxillofacial Surgeon, Zuyderland Medical Center ... ensures

MarketsandMarkets Events is a wholly owned division of MarketsandMarkets, a global market research and intelligence company producing over

1200 premium market research reports every year across 12 different industry verticals. By bringing together expert speakers from across the world

and leading technology and service providers, Events provide a senior level educational and networking platform where knowledge is shared and

partnerships and collaborations can be formed.

With offices in Asia, Europe and USA MarketsandMarkets ensures a truly global attendance at every event where attendees, speakers, exhibitors

and sponsors can exchange ideas in a relaxed and professional environment.

About MarketsandMarkets:

Submitting Paper Proposal:You can submit your paper proposal on any of the event topics, which will be available on the events website shortly.

Contact: Garima Shrivastava | Conference Producer

E: [email protected] | T: + 91 20 3010 8280

Participating As A Delegate:You can always contribute by sharing your knowledge with your peers and colleagues.

E: [email protected] | T: +91 20 6708 0270

Exhibiting Or Sponsoring At The Event:

In 2016, the event will be expanding its exhibition area and will offer an opportunity for exhibiting and showcasing your latest technologies, services, and products. We offer tailor made packages to sponsor the event based on your marketing budget.Contact: Tony Couch | Sponsorship Manager

E: [email protected] | T: +91 20 6708 0270

Media Alliances

We actively collaborate with publications, online portals and not-for-profit associations. To know more write to us.E: [email protected] | T: +91 20 6708 0270

How To Participate In Year 2017?

2nd Annual 3D Printing & Bio-printing in Healthcare Conference

12th & 13th October 2017, Dusseldorf, Germany.

Meet us again at the

+91 20 30108 270 | +44 (0)1865-842-976 [email protected] | www.marketsandmarkets.com

MARKETSANDMARKETS