DX8 RGBW Touch Panel DX8 RGBW Touch Panel

1. Technical Specs:

2. Product Size:

3. Installation Instruction:

Install Uninstall

4. Key Functions: 5. Terminals:

1 2

R4-5A/R4-CC ReceiverTouch Panel

www.ltech-led.com

Input Voltage:

Output Signal:

Working Temp.: Package Size:

Weight(G.W.):

100~240Vac

RF 2.4GHz, DMX512

-30℃~55℃

L113×W112×H50(mm)225g

DX8

R4-CC

Input Voltage: Output Voltage: Output Current: Output Power: Wireless Signal:

Working Temp.: Dimensions: Package Size: Weight(G.W.):

12~48Vdc3~46VdcCC 350/700/1050mA×4CH1.05W~48.3W×4CH Max 193.2W2.4GHz

-30℃~55℃L175×W44×H30(mm)L178×W48×H33(mm)165g

R4-5A CV Receiver

Input Voltage:

Max Current Load:

Max Output Power:

Wireless Signal:

Working Temp.:

Dimensions:

Package Size:

Weight(G.W.):

5~24Vdc

5A × 4CH Max. 20A

100W/240W/480W(5V/12V/24V)

2.4GHz

-30℃~55℃

L175×W44×H30(mm)

L178×W48×H33(mm)

150g

Note: Receiver is sold separately.

CC Receiver

Long press to turn on/off the tone.

Control Mode: 4 Zones Control

100-240VPower Input

ac DMX SignalOutput

RGBW Touch Panel

ON/OFF

Brightness/Speed

Touch Color Circle

R G B/W Color/ /

4 ZonesSelection Keys

Mode

Short press to on/offLong press to adjust color

Short press: Turn on the zoneLong press: Turn off the zone

The Changing Mode

4. Static Yellow5. Static Purple6. Static Cyan

7. Static White8. RGB Jumping9. 7 Colors Jumping

1. Static Red2. Static Green3. Static Blue

10. RGB Color Smooth11. Full-color Smooth

4 3 5 Update Time: 2016.09.21

6. Operating Instruction for Receiver:

Current Selection Switch

LED Lamp Connection Socket

LED Lamp Connection Socket

The Running Light

The Running Light

ID Learning Button

ID Learning Button

5~24VdcPower Input Socket

12~48VdcPower Input Socket

(Operation Table）

www.ltech-led.com

DX8 RGBW Touch PanelDX8 RGBW Touch Panel DX8 RGBW Touch Panel

Could connect RGB/RGBW LEDs.◆

9. DMX Wiring Diagram:8. Wiring Diagram:Wireless

7. Match/Clear Code between Touch Panel & Receiver:

Clear code:

Short press “ID learning button” on the R4-5A/R4-CC receiver, the running light keeps on. Then press the matching zone key on the touch panel, the running light flicker several times, match successfully.

Match code:

Attn: Multiple receivers could be synced to each zone.

Long press “ID learning button” on the R4-5A/R4-CC receiver for 5s, the running light flicker several times, deactivate the matching successfully.