Slide 1

1 CribMaster AMS Toolbox Slide 2 2 CribMaster Support Options http://www.cribmaster.com/vending.html http://www.cribmaster.com/vending.html ftp.ecribmaster.com/pub ftp.ecribmaster.com/pub Videos - ftp.ecribmaster.com/pub/documentation/videos/ Technical Support 1-855-CRIB-CMS 1-855-274-2267 CribMaster Support portal support@cribmaster.comftp.ecribmaster.com/pub/documentation/videos/ Slide 3 3 AMS TOOLBOX INTRO The original CribMaster ToolBox was the first of all the CribMaster vending solutions 1992 Specs: 73H x 39W x 41.5 D, approx. 698lbs. unstocked (185.4 cm x 99.1 cm x 105.4 cm, approx. 317kg) Add 5.8 (15 cm) for pallet height 120 volt/60 Hz, 4 amps (North America) 240 volt/50 Hz, 2 amps (Europe) Temperature Range -4F to 140F (-20 to 60 Celsius) Humidity of 20% to 80% RH Non-Condensing Specific model is AMS 39 660 Possible 1,920 individual items. Coil size and pitch options Many Options Slide 4 UN-CRATING THE AMS TOOLBOX Fork Lift close to vending location Remove retaining clips Fork lift upward to remove pallet 4 Slide 5 POWER AND CONNECTIVITY 5 * Slide 6 POWER INPUT COMPONENTS 6 Slide 7 POWER SWITCH 7 Slide 8 POWER INPUT COMPONENTS 8 Slide 9 9 COIL SIZE AND PITCH OPTIONS Small Coil 5, 7, 8, 9, 10, 12, 15, 18, 24, 32 Large Coil 4, 5, 7, 9, 10, 12, 15 Dual Coil 5, 7, 10, 12, 15, 24 Slide 10 10 COIL PITCH BY INCHES 4 Pitch = 4 12 Pitch = 1 5 Pitch = 3 15 Pitch = 1 3/8 7 Pitch = 2 18 Pitch = 1 8 Pitch = 2 24 Pitch = 9 Pitch = 232 Pitch = 10 Pitch = 1 7/8 Slide 11 11 COIL PITCH BY METRIC 4 = 114.30mm12 = 44.450mm 5 = 95.250mm15 = 34.925mm 7 = 69.850mm18 = 25.400mm 8 = 63.500mm24 = 19.050 9 = 50.800mm32 = 12.700mm 10 = 47.625mm Slide 12 12 DIFFERENT TYPES & SIZES OF COILS Slide 13 13 DIFFERENT TYPES & SIZES OF COILS Slide 14 14 Bin Naming Format - - Ex: 10-01-01 is located in Crib 10, Shelf 1, Bin/Tray 01 Slide 15 15 SIZING & PACKAGING ARE KEY! Methods and materials to help items dispense correctly: Rubber bands Plastic bags Roll and cuff gloves or sleeves, especially any glove with rubber or sticky surfaces Test with multiple items in coil to ensure total resistance is not greater than the motor(s) can dispense properly! Show Toolbox Packaging Video Slide 16 INSTALLATION AND TRAINING RECEIVING ITEMS INTO THE AMS TOOLBOX ADJUSTING AND COUNTING ITEMS ISSUING ITEMS FROM THE AMS TOOLBOX 16 Slide 17 17 REPLACING PARTS & TESTING Removing Coils Removing Helix Adapter Removing Coil Wing/Plastic Triangle Replacing Motors Removing Tray/Drawer Removing Dividers Installing Riser Testing Coils: ATR9 Software and Internal Control Panel Show AMS Helix and Motor Configuration video Slide 18 18 Slide 19 19 Slide 20 20 Slide 21 21 ATR SETUP Add AMS Toolbox, NOT ToolboxMachine! Slide 22 22 TROUBLESHOOTING Motors can be spun using the internal control panel. Motors can be spun using ADMIN / ADJUST / OPEN within CribMaster ATR. Motors can also be spun using a CribMaster Utility application called SPIN. Slide 23 23 TROUBLESHOOTING Incorrect Item packing will ultimately lead to jams. Incorrect item sizing can lead to jams.