1-20pages from camfil farr product catalog _product_catalogue_2008_en-gb
TRANSCRIPT
-
8/10/2019 1-20Pages From Camfil Farr Product Catalog _product_catalogue_2008_en-Gb
1/20
product catalogue
Camfil Farr Air Filter Products and Services
Air Filtration Solutions
Camfil Farr clean air solutions
-
8/10/2019 1-20Pages From Camfil Farr Product Catalog _product_catalogue_2008_en-Gb
2/20
EUROVENTCE
RTIFICATION
COMPANYSC
RL
62BddeSbastopol75003
ParisFRANCE
-RCSParisB
393363460-C
odeAPE :748
K
EUROVENTC
ertificationCom
panycertifiesth
at
from
Locatedat
Tradename
havebeenas
sessedaccord
ingtherequire
mentsoffollow
ingstandard
OM-11-2006
Thelistofcer
tifiedproducts
isdisplayeda
t:
http://www.eu
rovent-certifi
cation.com
isauthorise
dtousetheE
UROVENTCer
tificationmark
inaccordance
withtherules
specifiedinthe
OperationalM
anual
OM-11-2006
Approvaldate
:31/01/0
7
Re-checkedo
n:31/12/0
7
Validuntil:
31/03/09
CertificationDiplomaN
:
07.01.334
FineAirFilters
ClassF5-F9
CAMFILFARR
GROUP
Industrigatan
3 ,61933TRO
SA Sweden
Camfil
CAMFILFARR
GROUP
JacquesBENO
IST
Directorofcer
tification
All HEPA filters are
individually tested toEN 1822
Dear Customers,
I am pleased to present to you this latest edition of the Camfil Farr air filter
solutions catalogue. We have made every effort to make it more practical and
fully comprehensive. We are also making it available to you in the form of the
enclosed CD-Rom.
The catalogue contains up to date information and technical performance
data on our range of air filtration products. This issue also contains summary
information of the various test standards that need to be considered when
making your selection. We have also included an application guideline section
which will enable you to quickly identify the correct air filter for your application.
Camfil Farr are the world leader in providing air filtration solutions and the
product range includes many world class benchmark filters. In addition to
providing a comprehensive range of quality products, we at Camfil Farr believe
that service is of paramount importance. In todays fast moving industries the
ability to get goods to where they are needed quickly and correctly is vital.
To ensure that our right first time service matches our best in class products
we are developing our logistics and expanding our fleet of dedicated delivery
vehicles. This unique service will ensure that your goods arrive where you want
them, when you want them. Finally, I would strongly recommend that you visit
the www.camilfarr.co.uk website where you can access much more detailed
information about our products and services, and the latest news on our
CLEAN AIR SOLUTIONS.
Advanced fabrication
capability
Comprehensive stocks
backed by integrated
inhouse logistics
Enjoy your reading
Bill Wilkinson
Managing Director
-
8/10/2019 1-20Pages From Camfil Farr Product Catalog _product_catalogue_2008_en-Gb
3/201
Pre-
Filtrat
ion
,
Class
G3
to
F5
Bag
an
d
Comp
act
Filters
,
Class
F5
to
F9
HEPA
/
ULPA
Filters
,
Class
H1
0
to
U17
Car
bon
an
d
Chem
ica
l
Filters
Filter
Fram
es
an
d
Hous
ings
Air
Filter
Tec
hno
logy
Cam
fil
Farr
So
lut
ionsI n d e x - C a m f i l F a r r
Aspartofourcontinuo
usimprovement,CamfilFarrreservetherighttoch
angespecificationswithoutnotice.
Knowsley Road, Haslingden, Lancashire, BB4 4EG
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
www.camfilfarr.co.uk
Pre-Filtration, Class G3 to F5
30/30 ............................................................18Aeropleat PP .......................................................19Camglass GP .......................................................20Pad Holding Frame ..............................................21EcoFlo ............................................................22Cam Glass Media .................................................23
Synthetic Media Rolls ..........................................24Fan Coil Filter .....................................................25Hi-Cap 30P, 40P, 50P ......................................26
Bag and Compact Filters, Class F5 to F9
Hi-Flo M-Series .................................................29Hi-Flo P, PL-Series ...........................................30Hi-Flo U-Series .................................................31Hi-Flo A-Series .................................................32Hi-Flo T-Series .................................................33S-Flo W P Series ..................................................34
S-Flo W U Series .................................................35S-Flo W A Series ..................................................36Opakfil Green ......................................................37Ecopleat & Ecopleat MCTA ...................................38Riga-Flo ............................................................39OpakAir ............................................................40Airopac ............................................................41
HEPA / ULPA Filters, Class H10 to U17
Sofilair - H10 to H14 ...........................................45Sofilair Green ......................................................46
Close Pleat - H13 ................................................47Opakfil G Micretain - H10 ....................................48Megalam MD, MX, MG .........................................49Megalam MX & MG - H14 ....................................50Megalam MD - H10 & H14 ...................................51Megalam MD & MG - U15 ....................................52Megalam (Laminator) MDL & MXL - U15 & U16 .....53Silent Hood Diffuser - H14 ...................................54Megalam U (Gel) - H14 & U15 .............................55Megalam T (Gel) - H14 & U15 ..............................56Megalam MD & MX e-PTFE - U15 .........................57
Carbon and Chemical Filters
CityFlo ............................................................62CityCarb ..........................................................63CitySorb ............................................................64Camcarb Green ................................................... 65Camcarb Mounting Frames ...................................66Camsure ............................................................67
Housings, frames & special applications
Absolute Filter Holding Frame ..............................70Type 8 - Filter Holding Frame ...............................71FCB-P ............................................................72FCBS-HF ............................................................73FCBS-A ............................................................74FCBL-CC ............................................................75FCBL-CS ............................................................76FCBL-HF ............................................................77Pharmaseal .........................................................78
Camsafe ............................................................79Termikfil 2000 ...................................................80Absolute 1FRK .................................................81Paint Extract Filters ............................................. 82Airopac HT-HF ................................................. 83Panolair SSI - Micretain H10 ...............................84CDM Media ........................................................ 85Cam GT ...........................................................86Campulse EF ...................................................... 87Hi-Flo T ...........................................................88Gold Series ......................................................... 89HemiPleat Cartridges ...........................................90
-
8/10/2019 1-20Pages From Camfil Farr Product Catalog _product_catalogue_2008_en-Gb
4/20
C a m f i l F a r r S o l u t i o n s
2
Q u i c k S e l e c t i o n G u i d e
Aspartofourcontinuo
usimprovement,CamfilFarrreservetherighttoch
angespecificationswithoutnotice.
Knowsley Road, Haslingden, Lancashire, BB4 4EG
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
www.camfilfarr.co.uk
Filter Grade Air Filter Selection
Fina
lFilters
/
Clean
Room
Filters
Me
dium
Effic
iency
EN779:2
002
EN1822
EN779:2
002
HighEffic
ienc
y
Very
HighEffic
iency
Filtra
tion
for
Air
Con
dition
ing
Sys
tems.
Primary
Filtrat
ion
Classaccording
to
Fed.
Std
209
E
Pre-F
iltra
tion
for
HEPA/
ULPAFilters
ULPA
HEPA
Fine
Filters
Primary
F
ilters
G2 65%
G3 80%
G4 90%
Fine Filters
Primary Filters
MPPS(Most Penetrating Particle Size)
F5 40%
F6 60%
F7 80%
F8 90%
F9 95%
H10 85%
H11 95%
H12 99,5%
H13 99,95%
H14 99,995%
U15 99,9995%
U16 99,99995%
U17 99,999995%
DOP 0,3 um
95%
99,9%
99,97%
99,99%
99,999%
Filter
Ho
lding
Framesan
d
Cas
ings
Mo
lecu
lar
Filter Housings, Camseal, FC Casings,Type 8 Frames etc.
CityFlo, CitySorb,CityCarb, Camcarb
1
to
10
100
to
1000
100
000
10
000
EN 779:2002Average Arrestance
EN 779:2002Average Efficiency
-
8/10/2019 1-20Pages From Camfil Farr Product Catalog _product_catalogue_2008_en-Gb
5/203
Pre-
Filtrat
ion
,
Class
G3
to
F5
Bag
an
d
Comp
act
Filters
,
Class
F5
to
F9
HEPA
/
ULPA
Filters
,
Class
H1
0
to
U17
Car
bon
an
d
Chem
ica
l
Filters
Filter
Fram
es
an
d
Hous
ings
Air
Filter
Tec
hno
logy
Cam
fil
Farr
So
lut
ionsC a m f i l F a r r S o l u t i o n s
S e r v i c e s
Aspartofourcontinuo
usimprovement,CamfilFarrreservetherighttoch
angespecificationswithoutnotice.
Knowsley Road, Haslingden, Lancashire, BB4 4EG
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
www.camfilfarr.co.uk
Camfil Academy:
Become the air f i l tration specialist in
your comp any
In addition to providing up to date air filtration solutions Camfil Farr can
provide a structured training program covering all aspects of airfiltration engineering. Adapted to suit your needs the training includes
information on how to specify and select air filters, air filter standards,
indoor air quality legislation, air filter application, and reducing energy
and environmental impact.
Camfil On-Site Expertise:
Camfi l Fi l ter M anagement
Camfil has a fresh approach to managing on-site air filtration services.
We understand that filtration is required for protecting peoples health,
ensuring legislative compliance and protecting valuable investments.
We have our own site service team that can manage all aspects of yourair filter requirements by offering a wholly inclusive service package.
Ensuring safe and efficient running of effective air filtration systems
demands a multi-disciplined service solution. These extend beyond
comprehensive logistics to ensuring that filters are fitted correctly,
working efficiently, and optimised to reduce the overall cost ofownership for the lifetime of the installation.
In order to comply with current legislation and reduce cost of ownership
of some installations, upgrading work is required. Camfil can provide a
joined up solution which includes selection, supply, fitting,
commissioning and validation of any new or upgraded installations.
Filter installation upgrade service
Before After
Air filter system validation service
By fitting energy efficient filters and maintaining ventilation systems real
energy savings can be made quickly. Maintained correctly these will
translate into long lasting real reductions in cost and environmental
impact. Camfil can provide a comprehensive package of air hygiene
services that will ensure your systems are healthy, legislation compliant,
and cost effective.
Performance Managed Supply
Camfil complete the cradle to grave responsibility for all your filtrationneeds by providing a unique logistics system at the centre of which is a
national transport fleet. This dedicated fleet of vehicles with trained
employees ensures that you get your goods when and where you need
them. To complete the service, we can remove and dispose of used
filters together with providing all of the required certification.
-
8/10/2019 1-20Pages From Camfil Farr Product Catalog _product_catalogue_2008_en-Gb
6/20
C a m f i l F a r r S o l u t i o n s
4
C a r i n g f o r t h e E n v i r o n m e n t
Aspartofourcontinuo
usimprovement,CamfilFarrreservetherighttoch
angespecificationswithoutnotice.
Knowsley Road, Haslingden, Lancashire, BB4 4EG
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
www.camfilfarr.co.uk
How will your filters help you to reduce
the environment al im pact of your
installations?
Camfil has been involved in air quality for over 40 years, and has to set
an example when it comes to the environment. It therefore has an
obligation to provide its customers with practical assistance on green
issues. With regard to complying with the law on waste disposal, Camfil
is with you all the way; in designing products and services, Camfil
shares your environmental concerns.
It is now widely acknowledged that air conditioning filters can be
considered ordinary industrial waste, whereas filters used in
environments containing potentially hazardous products (e.g. return air
from clean rooms, spray booths and operating theatres) should be
considered special industrial waste and must be disposed of by an
approved route using accredited systems.
Please Note -your individual circumstances depend entirely on your
processes and we recommend that you approach your usual waste
disposal provider, who will be qualified to advise you on the matter.
In order to minimise waste, Camfil pay
close att ention to the l if e cycle of the
product:
1. We make strenuous efforts to extend the lifespan of our filters and to
optimise their performance, which means that you reduce your
operating costs, the frequency with which you have to replace the filters
and the cost of their disposal.
Just look at the large filter surface used in many of our products and
remember large filter area is synonymous with long filter life.
2. We favour the use of recyclable or incinerable materials.
3. We are continually researching effective materials with low pressure
loss, a parameter that has a direct influence on the energy consumed
during the lifetime of the filter.
4. The Green CAMFIL range ensures that you can dispose of your used
filters with less hassle and at lower cost. The use of plastics or
cardboard lends itself to the incineration of used filters whilst ensuring
compliance with all provisions of environmental law.
5. We minimise the weight of materials used in the construction of our
filters which helps reduce the waste mass as far as possible when the
filter reaches the end of its life.
6. In our ISO 14001 certified factories, we are phasing out the use of
chloride solvents and hazardous products from our processes.
Follow up CFM
Conscious of the increasing importance attached by our customers to
waste management, Camfil can support you and take charge of
replacing and organising the disposal of certain used filters as part of its
CAMFIL FILTER MANAGEMENT (CFM) programme. For more information
and to find out whether this service might work for you, please contact
us.
-
8/10/2019 1-20Pages From Camfil Farr Product Catalog _product_catalogue_2008_en-Gb
7/205
Pre-
Filtrat
ion
,
Class
G3
to
F5
Bag
an
d
Comp
act
Filters
,
Class
F5
to
F9
HEPA
/
ULPA
Filters
,
Class
H1
0
to
U17
Car
bon
an
d
Chem
ica
l
Filters
Filter
Fram
es
an
d
Hous
ings
Air
Filter
Tec
hno
logy
Cam
fil
Farr
So
lut
ionsC a m f i l F a r r S o l u t i o n s
W ou l d y ou l i k e t o r e d u c e y ou r e n e r g y o u t g o i n g s ?
Aspartofourcontinuo
usimprovement,CamfilFarrreservetherighttoch
angespecificationswithoutnotice.
Knowsley Road, Haslingden, Lancashire, BB4 4EG
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
www.camfilfarr.co.uk
Economic optimisation of ai r f i l t ration
The price of crude oil has more than doubled in recent years and the
cost of electricity is rising throughout the world. The World Banks
Energy Group has predicted that total energy consumption is set to rise
at the current rate for at least the next 50 years.
The cost of ventilation
Ventilating buildings, as we know, can be a very expensive business. The
average energy cost of filters is around 30%of the total costs of the
system. By choosing the right filter, for example the F7 for its efficiency
and its very low average pressure loss, energy savings can be made
whilst maintaining a high level of IAQ. When you consider that the air
filter is the most inexpensive and simplest component to change,
savings can be made quickly.
Typical pressure loss (Pa) in a ventilation system with 2 stage filtration
1 Pa = 1 euro
A rule of thumb, for a typical installation running for half of the time over
one year, is that one additional Pascal in pressure drop adds 1 euro per
filter in extra energy cost.
A badly designed filter construction could add 50 Pascal compared to a
well engineered filter, even if it claims to have the same efficiency. In
other words it adds 50 euros to theannual energy bill, for every filter.
70% of the total cost comes from energy
costs
Calculations show that energy normally accounts for 70%of the total
cost of the life cycle of an air treatment system. Energy consumption is
in direct proportion to the filters average pressure loss.
Choosing the right f ilt er saves energy
In order to optimise the lifespan of the filter and to reduce energy
consumption, it is important to bear in mind the extent to which their
configuration and their structure influence the average pressure loss.
Software aimed at helping select the
right filter = optimising energy costs
For over 40 years, Camfil Farr has played a pioneering role in designing
filters with low average pressure loss for all efficiency levels for air
conditioning and ventilation systems. Camfil Farr was the first filter
manufacturer to develop sophisticated software that calculates the
overall cost for the complete life cycle of air filters. As part of our
continuous improvement, this software has evolved over time and it
uses real life data collected from numerous tests in real use conditions.This enables us to calculate the pressure loss of the filter and its actual
lifespan, rather than relying on theoretical calculations.
For more information and assistance, please contact your
nearest branch of Camfil Farr.
20
%
40
60
80
100
Energ
yCost
70
Filte
rCost
15
Cleanin
gCost
8
Labo
urCo
st
5
Disposa
lCost
2
Tapered pockets
Parallel pockets
Blocked surface = high energy consumption
-
8/10/2019 1-20Pages From Camfil Farr Product Catalog _product_catalogue_2008_en-Gb
8/20
C a m f i l F a r r S o l u t i o n s
6
E n e r g y & A i r Q u a l i t y R a t i n g
Aspartofourcontinuo
usimprovement,CamfilFarrreservetherighttoch
angespecificationswithoutnotice.
Knowsley Road, Haslingden, Lancashire, BB4 4EG
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
www.camfilfarr.co.uk
We have m ade c hoosing filt ers as easy as
ABC.
The newly developed Energy & Air Quality Rating makes it easy to
reduce energy consumption and at the same time, it guarantees the air
quality. These two critical factors were taken into consideration during
the development of our new classification system. If a filter achieves a
good grade, it is because it cuts costs and makes the air clean. Its as
simple as that.
H onestly, how did you ch oose fil tersbefore?
Its not just about new EU energy
concepts, its about your grandchildren.
The new and more stringent requirements aim to make your company
more energy efficient but the most important aspect is much closer to
home. At Camfil Farr, we are constantly striving to develop new
technologies and methods that make us even more environmentally
friendly. We want to give our children and our grandchildren the
opportunity to grow up in a clean environment. At the end of the day,
thats what matters most.
This symbol will speak volumes in your
annual report.
The cost of energy is at an all-time high and will continue to increase. It
has never been more important to strive for energy efficiency. In some
cases we have seen that air filters may be responsible for as much as
30 percent of the total energy consumption in an air-handling unit.
Consequently, there is substantial profit to be made by choosing wisely.
The Energy & Air Quality Rating helps you control your energy
consumption. That will save you money. Actually, a lot of money.
Why one of t he leading fi l ter companies
cares.
We believe in transparency and honesty. The filter industry is clouded by
numbers and figures, making it virtually impossible to compare different
filters. We want to clean up the mess. Surely, the customer will profit
from having all the facts when deciding which filter to
choose. We believe that the industry itself will benefit from a common
standard, since it puts pressure on developers to make energy efficient
filters. When a company develops an excellent filter, we think it should
be rewarded with an A.
Objectively tested.
Filter efficiency in actual use was an essential parameter when
developing the Energy & Air Quality Rating. To guarantee independent
verification of the discharged efficiency value, we collaborated with the
Technical Research Institute of Sweden (SP) - a leading organisation in
the development of sustainable energy and environmental technology in
Europe. The data was obtained through long-term measurements,
performed under realistic conditions.
As you can see, the advantages are
obvious.
Well, maybe not crystal clear. Differentiating air filters is a complex
matter. Many variables impact a comparison study, and not all are self-
evident. Laboratory tests are made under controlled conditions and test
protocols are an imperfect compromise of actual conditions. In actual
use, most air filters will remain in a system for months or even years.
During that time, an air filter will see hundreds of environmental changes
such as temperature, humidity, airflow velocity and particle load. Add to
this the fact that it is not impossible for suppliers to manipulate
observations or data to best suit their needs. With the Energy & Air
Quality Rating all you really need to look at is a single letter. All in all, we
like to think the advantages are quite obvious.
Selecting the correct air filter has never been easy but
the Energy & Air Quality Rating changes that. Using the
rating system, its easy to choose the right air filter for
your needs. Its important however, to be aware that an
A-filter is not always the right choice for you. The top
rating may be appropriate for a medical or food
application where the demand for air quality is critical.
Conversely, a G-filter may be the best choice for a low-
grade storeroom. Whatever your budget and your
requirement for air quality, there will be a rating letter to
meet your needs. The selection process will be both
easy and precise.
-
8/10/2019 1-20Pages From Camfil Farr Product Catalog _product_catalogue_2008_en-Gb
9/207
Pre-
Filtrat
ion
,
Class
G3
to
F5
Bag
an
d
Comp
act
Filters
,
Class
F5
to
F9
HEPA
/
ULPA
Filters
,
Class
H1
0
to
U17
Car
bon
an
d
Chem
ica
l
Filters
Filter
Fram
es
an
d
Hous
ings
Air
Filter
Tec
hno
logy
Cam
fil
Farr
So
lut
ionsC a m f i l F a r r S o l u t i o n s
I n d o o r A i r Q u a l i t y ( I A Q )
Aspartofourcontinuo
usimprovement,CamfilFarrreservetherighttoch
angespecificationswithoutnotice.
Knowsley Road, Haslingden, Lancashire, BB4 4EG
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
www.camfilfarr.co.uk
Environmental Health
Environmental healthis becoming a central concern at national and
international levels. Indoor Air Quality (IAQ) is an area that focuses on
providing a comfortable and healthy indoor environment which is
important to the well being of people. We spend 80%of our time in
indoor spaces and, as such, the issue of IAQ is a key aspect of public
health, especially since this affects the entire population, particularly themost sensitive and vulnerable.
The industrialised world is a very different place compared to 50 years
ago and one major difference is that the air we breathe is now more
heavily and more diversely polluted than at any time in the past.
Although natural sources of pollution exist, the greater concerns arise
as a result of mans own activities which have increased both the amount
and the complexity of pollutants found in the atmosphere. There are tens
of thousands of synthetic chemicals (not found in nature) made today
with an estimated annual production rate in excess of a billion tonnes.
These chemicals are released to the atmosphere during
manufacture use and can subsequently travel vast distances. They are
an inevitable part of our lives
.
Atmospheric pollution
Atmospheric pollutioncan be categorised in two different ways. The
simplest is measurement (a physical categorisation) to distinguish
gaseous pollutants from solid, dust and particulate pollutants. The
second is based on the origin of pollutants and is divided into primary
and secondary pollutants.
Primary pollutant s
Primary pollutantsare substances present in the atmosphere, in theform in which they are emitted. Of these pollutants, some are especially
prominent:
Sulphur dioxide (SO2) emitted by certain industrial processes, such as
paper-making and refining, and in particular by the use of sulphurous
fossil fuels. SO2 is one of the main causes of acid rain on account of its
transformation in the atmosphere into sulphuric acid (H2 SO4). Nitric
oxides (NOX), and in particular nitrogen dioxide (NO2), which is usually
emitted from the burning of fossil fuels (particularly vehicles), contribute
towards the formation of ozone in the atmosphere. Polycyclic aromatic
hydrocarbons are emitted by the incomplete burning of fuels or carbon,
which can usually be found in the air, linked to particles. Some of them
are known to be highly carcinogenic.
Secondary pollutants
Secondary pollutantsare substances whose presence in the
atmosphere is the result of chemical transformations related to theinteraction of compounds known as precursors. Ozone is the main
secondary pollutant, it is formed as a result of a photochemical process
in the presence of certain primary pollutants (carbon monoxide, nitric
oxide and volatile organic compounds). This is a gas that is naturally
present in the atmosphere in low concentrations at high altitude. At low
altitude, on the other hand, the development of the concentration is
primarily the result of human activity. Sulphuric acid and nitric acid form
in the atmosphere as a result of humidity from sulphur dioxide and nitric
oxide respectively.
Solid pollutants
Solid pollutantsusually in the form of small (fine) particles are very
important and from a cleanliness point of view, these particles deserve
particular attention. These are capable of acting as vectors to other
substances, such as carcinogenic polycyclic aromatic hydrocarbons,
which is particularly worrying given the capacity of the finest particles (