1 2 - arabian auto agency · gasoline demolition and electric hammers for demolition. technology,...

Gasoline demolition and electric hammers for demolition.Technology, speed, and easy use for maximum efficiency.

Demolition as a construction process: Wacker Neuson offers everything to support the pros and facilitate profitable work.

1 2

Wacker Neuson's practical floor saws and cut-off saws save costs without compromising results. They facilitate work processes and further improve results. They are designed, manufactured, and serviced in accordance with Wacker Neuson's corporate values. They, too, are included in the promise we make about our products and services: reliability, trustworthiness, fast reaction, flexibility, and innovation.

1 Gasoline-driven floor saws

For precise cutting: stable, straight running and optimal weight distribution of the Wacker Neuson floor saws.

2 Gasoline cut-off saws

For demanding, continuous operation on the construction site: durable design and excellent handling. With or without guide cart.

Modifications reserved in the interest of continuous further development.

09

87

99

6/0

2/2

01

0/H

eid

lmai

r/P

rint

Sta

www.wackerneuson.com

Please note: The product range of the Wacker Neuson Group comprises more than 300 different product groups in the light and compact equipment areas. In the light equipment area the product range comprises various device types – according to different voltage and frequency conditions, local regulations, market specifics and operating conditions. Not all Wacker Neuson products listed or shown here are therefore available or approved in all countries. Modifications reserved in the interest of continuous further development. The Wacker Neuson Group does not accept any liability whatsoever for the correctness and completeness of the data given in this brochure. Reprints permissible only with prior approval in writing by the Wacker Neuson Group, Munich. © Wacker Neuson SE 2010. All rights reserved.

The self-explanatory model guide: * Tool holder 27 x 80 mm. Many tools also available with other tool holders. We'll be happy to help you with any questions. ** For use with a ram rod.

Accessories possible. Accessories not possible.

DEMOLITION TOOLS, STAMPING TOOLS, RAMMING TOOLS FOR GASOLINE DEMOLITION AND ELECTRIC HAMMERS

Width Effective length

BH 23* BH 24* /BH 24 Low Vib*

EH 22* EH 23* EH 25*

Moil point – 280 mm

Star-shaped chisel – 280 mm

Flat chisel 30 mm 280 mm

Wedge chisel 35 mm 300 mm

Wide chisel 75 mm 300 mm

Flat spade 120 mm 300 mm

Asphalt cutter 75 mm 320 mm

DRIVING HOODS

Ram rod – 130 mm

Ramming shoe** – 150 x 150 mm

Driving hood up to ø 80 mm** – –

Driving hood up to ø 120 mm** – –

Driving hood 0 - 35 mm – –

Driving hood 35 - 60 mm – –

DRIVING MANDRELS FOR DEHN RODS

ø 20 mm – –

ø 25 mm – –

TIE TAMPING TOOLS

Tie tamping tool 30 x 80 mm 380 mm

Tie tamping tool 30 x 120 mm 380 mm

Tie tamping tool (noise muffled version)

30 x 80 mm

380 mm

BLANK FOR SPECIAL TOOLS

Blank ø 50 mm –

Blank ø 70 mm –

Blank ø 80 mm –

MORE ACCESSORIES

Guide cylinder for strut – –

Strut – –

Supplementary handle for horizontal operation

– –

Standard transport cart – –

Transport cart with pneumatic tires – –

Grease gun – –

Grease cartridge – –

BEST-IN-CLASS PERFORMANCE.

Wacker Neuson's hammers: Power in Action. Precision and ease of use.

2_3 WACKER NEUSON HAMMERS Modifications reserved in the interest of continuous further development.

The self-explanatory model guide:

* Applies only to EHB 11. ** Short twist.

Accessories possible. Accessories not possible.

Accessories

DRILLING TOOLS FOR ELECTRIC HAMMERS

Effective length EHB 7 EHB 11 SDS-max

EHB 11 hex 19 x 82.5

ø 14 mm 400 mm

ø 15 mm 200 / 400 mm

ø 16 mm 200 / 400 mm

ø 18 mm 200 / 400 mm

ø 18 mm 250 mm

ø 20 mm 200 / 400 mm

ø 20 mm 250 mm

ø 22 mm 200 / 400 mm

ø 24 mm 200 / 400 mm

ø 25 mm 200 / 400 mm

ø 26 mm 160 mm

ø 28 mm 250 mm

ø 28 mm 400 mm

ø 28 mm 450 mm

ø 28 mm 550 mm

ø 30 mm 250 / 450 mm

ø 32 mm 250 mm

ø 32 mm 400 mm

ø 32 mm 450 mm

ø 35 mm 250 mm

ø 35 mm 450 mm

ø 35 mm 550 mm

ø 38 mm 250 / 450 mm

ø 40 mm 250 mm

ø 40 mm 400 mm

ø 40 mm 450 mm

ø 42 mm 160 mm

ø 45 mm 400 mm

ø 45 mm 450 mm

ø 55 mm 430 mm *

ø 55 mm 550 mm **

ø 65 mm 430 mm *

ø 65 mm 550 mm **

ø 80 mm 430 mm *

ø 80 mm 550 mm **

Additional tools, extensions, and adapters for concrete drilling systems on request.

DRILLING TOOLS FOR ELECTRIC HAMMERS

Width Effective length EH 6 EHB 7 EH 9 EHB 11 SDS-max

EH 9 EHB 11 hex 19 x 82.5

Asphalt cutter 80 mm 320 mm

Asphalt chisel 90 mm 280 mm

Wide chisel 80 mm 180 mm

Broad spade chisel 115 mm 230 mm





Flat spade 90 mm 280 mm

Winged chisel 35 mm 260 mm

Winged chisel 38 mm 160 mm

Jointing chisel 38 mm 160 m

Hollow gauging chisel – 180 mm

Gauging chisel 32 mm 180 mm

Flat wedge chisel (multi-force) 25 mm 190 mm

Mortar raking chisel 10 mm 180 mm

Plaster chisel 65 mm 180 mm

Plaster chisel 50 mm 280 mm

Basic element – 660 mm

Shovel chisel 110 mm 280 mm








Bush hammer insert holder – 110 mm

Stockhammer insert 5 x 5 teeth –



Toothed chisel 32 mm 180 mm

DEMOLITION/ROTARY HAMMERS

0

ACCESSORIES - From the hammer to the complete system: Additions that move you forward - Technical data

Page 16

ELECTRIC HAMMERS - The large electric hammers:: EH 25, EH 23 Low Vib and EH 22 - The medium-weight electric hammers: EH 9 and EHB 11 - The EH 6 and EHB 7 lightweight hammers - Technical data

Page 6

GASOLINE DEMOLITION HAMMERS - The top performers BH 23, BH 24 and BH 24 Low Vib - Greatness lies in the details, benefits lie in practice - Technical data

Page 4

FIRST-CLASS POWER DEVELOPMENT - What all Wacker Neuson gasoline and electric hammers have in common

What all Wacker Neuson gasoline and electric hammers have in common: First-class power delivery.

4_5 WACKER NEUSON HAMMERS

BH 24 EH 25

The new generation of gasoline demolition hammers from Wacker Neuson: The very latest technology. For your benefit.

- The most powerful gasoline demolition hammers on the market.

- Improved ergonomics with consistently high breaking output.

- Improved useful life throughout the entire range of hammers.

- Low-emission, EPA- and EU 2004/26/EC-certified WM 80 engine.

- Independent of electricity, compressed air, hydraulics.

- First-class vibration damping.

First-class power development

Performance that gets to the point.

• Greatest availability due to extremely long useful life, low maintenance, and first-class service.

• Ergonomic design.• Powerful.• Machine and task-specific accessories for

demolition, drilling, ramming, and tie tamping.

Wacker Neuson's electric hammers: Intelligence and endurance.

- Maintenance-free or low-maintenance electric motors with or without built-in inverter.

- Ergonomic design and handy format.

- Best power to weight ratio.

- First-class vibration damping.

The particular strengths of Wacker Neuson's gasoline demolition hammers lie not only in their excellent performance, but also in the way they get their results: Uncompromising in use, easy to use, durable.

Gasoline demolition hammers: Pros just do more.

Gasoline demolition

hammers6_7 WACKER NEUSON HAMMERS

Our new generation of top performers: BH 23, BH 24 and BH 24 Low Vib.


Individual strengths, common benefits.

- Thrifty, low-emission WM 80, the engine of the future. Wacker Neuson's own development: light, environmentally sound, and user-friendly.

- Long continuous operating time due to low consumption and large-volume fuel tank.

- Simple percussion system maintenance at the site with a small grease gun by way of the central zerk fitting.

- Shank(s) for all standard tools.

- Flexible use, independent of compressed air supply and compressors.

- The supplementary handle makes the machine easier to use.

Gasoline demolition hammers

The BH 24 has the hardest-hitting arguments: It has the highest single stroke energy of all gasoline demolition hammers.

The powerful, efficient percussion system and the proven WM 80 engine make the BH 24 a high-productivity demolition specialist.

BH 24 Low Vib – Soft power

Specialized in fatigue-free, highly productive work: Highly effective vibration damping through innovative full-hood vibration damping, which also allows for problem-free continuous use of the hammer for up to 8 hours under the EU vibration directive, 2002/44/EC. Only 4.9 m/s2 hand-arm acceleration.

The BH 23 is as tough as nails on concrete and asphalt. And soft as a feather to control.

The full-hood vibration damping makes the BH 23 particularly ergonomic. The compact size of the hammer makes it easy to manipulate.

It is particularly economic and the ideal entry into the world of Wacker Neuson gasoline demolition hammers.

The Wacker Neuson BH 24:THE WORLD’S LEADING GASOLINE DEMOLITION HAMMER IN SINGLE STROKE ENERGY.The new generation just got better, with the following improved capabilities:

• Even easier to use but with the same high levels of breaking output.

• Improved engine cooling for more comfortable work at lower engine temperatures.

• Easier start-up.

• Longer useful life.

• A minimal number of components and easy access for easy handling and maintenance.

Greatness lies in the details, benefits lie in practice.


The newly developed percussion system is optimally adapted for the proven Wacker Neuson WM 80 engine.

- High impulse speeds combine with a light striker for high single-stroke energy, extremely constant percussion behavior, and low vibration.

- The open, self-cleaning percussion system reduces servicing to simple lubrication of the system.

The Wacker Neuson WM 80 two-cycle engine is a true engine of the future.

It complies with the strict US EPA emissions regulations and the emissions directive of the European Union (Directive 2004/26/EC), and is thrifty, light, and reliable.

Independence from external power sources is the outstanding feature of our gasoline demolition hammers.

It allows for a wide variety of applications and makes our hammers extremely efficient.


With the best power-to-weight ratios of their class, Wacker Neuson's gasoline demolition hammers offer ideal conditions for productive use.

Additionally, they are ergonomically optimized and so well vibration-damped that the stress on the operator is limited even with longer use.

Wacker Neuson's gasoline demolition hammers are sustainably economical:

They can be easily and quickly maintained via a central zerk fitting, have multiple uses, and can run for longer periods thanks to their large fuel tanks. All their components are designed for a long useful life.

The new integrated jump start – also known as a purger – makes for even more reliable start-up of our gasoline demolition hammers.

Now you only need a few pulls and you are ready to start working.

Optimal ergonomics for user-friendly operation.

The lower position of the handles provides for improved ease of use and, together with the lower overall center of gravity, increases productivity.

The machine can be refueled in an upright or horizontal position.

The fuel cap has been repositioned to make refueling easier, whether the machine is upright or horizontal, thereby minimizing delays on site.

NEW: The purger – the integrated start-up aid NEW: Improved ergonomics – easier to use – more efficient NEW: Quick and easy refueling

Percussion system BH 24 Power-to-weight ratios WM 80 Economical Independent

Emissions pursuant to EU Directive 2004/26/EC

0 100 200 300 400 500 600 700

2-CYCLE ENGINES

EMISSIONS in g/kWh

Permitted maximum value

WM 80

CO HC + NOx

WM 80: The new two-cycle engine for Wacker Neuson gasoline demolition hammers.


High performance, environmental soundness, and easy handling in an ideal combination:

- Developed in-house by Wacker Neuson.

- Low consumption.

- Excellent start-up behavior.

- Quality engine parts that guarantee the maximum useful life even under constantly high stress.

- Environmentally friendly thanks to the catalytic converter. Complies with all current emissions regulations.

- Use at any tilt thanks to the 2-cycle engine.


A drive unit representing a combination of all advantages:

• Power.• Lowest emissions.• Best power to weight ratio.• Long service life.• Optimal adaptation of the engine

to the percussion system.

The catalytic converter: Proven a million times over in the automotive industry.

THE ORIGINALfrom Wacker Neuson


Technical Data.

TECHNICAL DATA BH 23

L x W x H (without tools) mm 777 x 492 x 346 777 x 492 x 346 833 x 492 x 346 833 x 492 x 346

Weight (without tools) kg 24.0 24.0 25.0 25.0

Shank mm ø 27 x 80 hex 25 x 108 hex 28 x 152 hex 28 x 160

Percussion rate 1/min 1.300

Single stroke energy J (mkp) 55 (5.5)

Drive Air-cooled single cylinder two-cycle gasoline engine

Engine manufacturer Wacker Neuson

Model WM 80

Displacement cm3 80

Operating performance kW (HP) 1.6 (2.18)

At speed 1/min 4,250

Gasoline/oil mixture 50:1

Tank capacity l 1.8

Fuel consumption l/h 0.9

Power transmission From the engine via the centrifugal clutch, crank mechanism, and air-cushion percussion system to the tool

TECHNICAL DATA BH 24



Shank mm ø 27 x 80 hex 25 x 108 hex 28 x 152 hex 28 x 160 hex 32 x 160

Percussion rate 1/min 1,250 1,250 1,250 1,250

Single stroke energy J (mkp) 65 (6.5) 65 (6.5) 65 (6.5) 65 (6.5)


Engine manufacturer Wacker Neuson Wacker Neuson Wacker Neuson Wacker Neuson

Model WM 80 WM 80 WM 80 WM 80

Displacement cm3 80 80 80 80

Operating performance kW (HP) 1.7 (2.31) 1.7 (2.31) 1.7 (2.31) 1.7 (2.31)

At speed 1/min 4,100 4,100 4,100 4,100

Gasoline/oil mixture 50:1 50:1 50:1 50:1

Tank capacity l 1.8 1.8 1.8 1.8

Fuel consumption l/h 1.1 1.1 1.1 1.1

Power transmission From the engine via the centrifugal clutch. crank mechanism. and air-cushion percussion system to the tool

TECHNICAL DATA BH 24 Low Vib



Shank mm ø 27 x 80 hex 25 x 108 hex 28 x 152 hex 28 x 160 hex 32 x 160

Percussion rate 1/min 1,350 1,350 1,350 1,350

Single stroke energy J (mkp) 55 (5.5) 55 (5.5) 55 (5.5) 55 (5.5)


Engine manufacturer Wacker Neuson Wacker Neuson Wacker Neuson Wacker Neuson

Model WM 80 WM 80 WM 80 WM 80

Displacement cm3 80 80 80 80

Operating performance kW (HP) 1.6 (2.18) 1.6 (2.18) 1.6 (2.18) 1.6 (2.18)

At speed 1/min 4,500 4,500 4,500 4,500

Gasoline/oil mixture 50:1 50:1 50:1 50:1

Tank capacity l 1.8 1.8 1.8 1.8

Fuel consumption l/h 0.9 0.9 0.9 0.9

Power transmission From the engine via the centrifugal clutch. crank mechanism. and air-cushion percussion system to the tool

Wacker Neuson's electric hammers combine excellent percussion performance and high engine performance for an outstanding performance profile. They are built to last, and also feature first-class vibration damping.

The electric hammers: Quality, longevity, and first-class vibration damping.

Electric hammers


Brilliant breaking output with very low weight. Unique. The EH 25.


Electric hammers

Lighter, quicker, stronger. The defining characteristics of the new EH 25.

- Extremely high breaking output and single-stroke energy combined with low weight thanks to a new hollow piston percussion system with a rod striker and a patented, shockwave-optimized percussion system.

- At 25 kg, the lightest machine in its class.

- First-class vibration damping with hand-arm vibration under 5 m/s2 thanks to efficient full-hood vibration damping.

- A 2-rocker system ensures the EH 25 can be precisely controlled, helping you get on with the task at hand.

- Unbeatable useful life: the induction motor with a carbon brush-free drive is maintenance-free and has a very long useful life.

- All components are easy to access and therefore to maintain.

- Shanks available for all standard large hammer tools.

- Our unique integrated inverter provides increased protection for the operator: an automatic voltage compensation system prevents undervoltage and excess voltage.

The only one of its kind on the market:

• 70 J single-stroke energy

• 25 kg operating weight

• Low Vibration Design

Hollow piston percussion system with rod striker.

The patented shockwave-optimized percussion system provides for an extremely high breaking output.

NEW

The large electric hammer: EH 23 Low Vib.


Electric hammers

2 Open percussion system The percussion system was equipped with an aluminum guide cylinder, and is optimally adapted to the Wacker Neuson universal motor. This provides higher performance with lower weight.

3 Excellent power-to-weight ratio Significantly lighter than all competitors – with the same performance.2 3

Excellent percussion performance with optimum power-to-weight ratio. Vibration damping and straightforward on-site maintenance:

- First-class vibration damping with 4.8 m/s2 hand-arm acceleration (HAV). Continuous use for up to 8 working hours a day possible in accordance with EU directive 2002/44/EC.

- Intelligent full-hood vibration damping supports the handling of the hammer with the body.

- Best power to weight ratio.

- Equal percussion performance in every material through the optimized, recoil-independent air-cushion percussion system.

- Suitable for demolition and ramming.

- Fast, easy maintenance due to open percussion system.

- Additional practical handle for working at an angle or for transport of the hammer.

- Shanks available for all standard large hammer tools.

1

1 Low Vib Vibration damping allows the electric hammers to be used without difficulty over a longer period of time. The EH 23 Low Vib is below the critical acceleration limit of 5 m/s² - not only on the handles but on the entire hood.

Unbeatable tamping: the EH 22.


Electric hammers

The electric tie-tamper with durability and power:

- Robust design with indestructible, three-phase AC motor.

- The patented full-hood vibration damping ensures low hand-arm vibrations and fatigue-free work.

- Every component on the EH 22 can be accessed quickly and easily, making it easy to maintain and keeping outage times to a minimum.

The strut is an accessory for fatigue-free work and functions as a noise-muffled tie tamping tool.

The medium-weight electric hammers: the EH 9 and EHB 11.


Electric hammers

1 Brush-free drive Robust, maintenance-free drive without carbon brushes.

2 Open percussion system The open percussion system reduces maintenance to simple lubrication of the percussion system. Self-cleaning included!

3 Ergonomic design The individually adjustable Pro-Ergo® handle system was developed for especially fast, easy repositioning during use: for more fatigue-free work and more performance in the same timeframe.

1

2

3

Medium size, maximum performance, and indispensable versatility in an ergonomically optimized form:

- With built-in frequency inverter for maximum useful life.

- High-tech percussion system for concentrated performance in hard and soft material.

- Adjustable Pro-Ergo® handle system: fast, easy repositioning depending on the task.

- Maintenance-free due to the lack of carbon brushes and the open percussion system.

- For drilling and demolition.

- Two handles are available: Pro-Ergo® and standard

The smart way to go through walls. Tips for drilling with EHB 11.

TIP 1 Only use cable with a minimum cross section of 2.5 mm for extensions up to 50 m. Greater lengths require thicker cables.

TIP 2 Unroll the cable drum completely. Rolled-up cables reduce performance.

TIP 3 Do not apply too much pressure, or the percussion system will not develop its full power.

TIP 4 Do not use double cutting drills. The hammer is too strong.

TIP 5 Regularly remove the drill for ventilation.

TIP 6 Avoid jamming the drill.

TIP 7 The EHB 11 will shut down in the event of danger for the user or the hammer. It will only restart once proper drilling has resumed.

The lightweight hammers: EH 6 and EHB 7.


Electric hammers

The lightweight heavy-hitters: Their full power is there when you need it. Anytime, and for a long time.

1 Shockwave-optimized percussion system Maximum single stroke energy, and therefore top breaking output in its class thanks to its high-performance drive and shockwave-optimized percussion system.

2 Long-Life Design Longest useful life in its class (MTTF) through the use of highly durable materials: the cranking and percussion system housing is made of metal; the housing parts are fiberglass-reinforced plastic, and can take a beating. The drive is optimized for long life.

3 Exemplary ergonomics Exemplary ergonomics thanks to the main handle vibration damper that has been used for years in the EH 9 / EHB 11, which reduces the vibration stress for the user. And the groove-free rod handle (EHB 7), developed together with the Fraunhofer Institut, which cuts even less into the user's hand.

1 2 3

Technical Data.


TECHNICAL DATA EH 6 EHB 7 EH 9 EHB 11


Weight (without tools) kg 7.1 7.3

10.7 SDS-max 10.0 hex

11.7 SDS-max 11.0 hex

Shank mm SDS-max SDS-max SDS-max hex 19 x 82.5

SDS-max hex 19 x 82.5

Percussion rate (adjustable) 1/min

2,200 - 2,850

2,200 - 2,850

1,300 - 2,150

1,300 - 2,150

Drill speed (adjustable) 1/min

–

450

–

140 - 220

Single stroke energy J (mkp)

12

12

19 (1.9)

19 (1.9)

Drive Double-insulated universal motor

Double-insulated universal motor

Three-phase induction motor with upstream frequency inverter for ac power, double insulated


Voltage V 220 - 240 1˜ 220 - 240 1˜ 220 - 240 1˜ 220 - 240 1˜Frequency Hz 50 / 60 50 / 60 50 / 60 50 / 60

Current A 7.0 7.0 7.5 7.5

Power kW 1.3 1.3 1.38 1.38

Percussion system Air-cushion percussion system

Air-cushion percussion system



Drill drive – With safety clutch and disconnectable drive shaft down

– With safety clutch and disconnectable drive shaft down

TECHNICAL DATA EH 23 Low Vib EH 25

L x W x H (without tools) mm 750 x 530 x 210

850 x 590 x 238

906 x 590 x 238

Weight (without tools) kg

22.4 25 26

Shank mm ø 27 x 80 hex 25 x 108 hex 28 x 152 hex 28 x 160

ø 27 x 80 hex 25 x 108

hex 28 x 160 hex 28 x 152 hex 32 x 160

Percussion rate (adjustable) 1/min

1,280

1,271

1,271

Drill speed (adjustable) 1/min

–

–

–

Single stroke energy J (mkp)

50 (5)

70

70

Drive Double-insulated universal motor



Voltage V 230 1˜ 230 1˜ 230 1˜Frequency Hz 50 / 60 50 50

Current A 10.8 15.3 15.3

Power kW 2.2 2.5 2.5

Percussion system Air-cushion percussion system



Drill drive – – –

Use tools that have proven themselves a thousand times over, because it comes from practical use and completely complies with Wacker Neuson's strict quality standards. Pros can only be truly productive with professional tools and accessories. Every task. Every day.

Accessories: Higher value, higher benefits, more possibilities. From the hammer to the complete system, which you can always rely on.

Accessories


The accessories. From the hammer to the complete system: Additions that move you forward.


Accessories

Transportation case*

The EH 6, EH 7, EH 9, and EHB 11 electric hammers can be transported practically in the appropriate Wacker Neuson case, where everything has its place and nothing is damaged. In our cases, even drills and chisels with especially large effective lengths (500 mm) can be transported safely.

Transport cart

For all large hammers, Wacker Neuson offers a transport cart, in which all hammers and chisels are safely stored and easy to transport. Transport carts with pneumatic tires are also available.

* Included within the scope of delivery. Also available as additional accessory.

Star-shaped chisel

• The cross-shaped tip transfers the percussion energy optimally to the demolition material. The specially shaped surface prevents it from sticking and jamming: a productive workflow is guaranteed.

• The special geometry makes the star-shaped chisel self-sharpening and therefore always ready for use.

With Wacker Neuson hammers, you are always buying a well-thought-out and future-oriented system.

1 2 - arabian auto agency · gasoline demolition and electric hammers for demolition. technology,...

Documents