Page

Applications MS 2Technical Features MS 2Electrical and Mechanical Characteristics MS 36 Pin Single Row Version MS 512 Pin Single Row Version MS 750 Pin dual Row Version MS 9Packaging MS 10Mating Conditions for Micro Stac MS12Part Number Index MS13

- MS 1 -

0.8mm Pitch ConnectorsBoard to Board Series

Table of Contents

Applications

Technical Features

Derating Curve

http://www.Coconn.com - MS 2 -

In spite of the small design of the Coconn 0.8mm Pitch connectors Board to Board series, they reach a high current rating. The contacts feature large radiant surfaces to derive heat. The derating curve shows the 50pin version without PCB.

modules

Facility management: Signal and indicator devices,

alarm systems and bus

Intensive medical equipment,

Mini PLCs, fieldbus modules,mini solenoid systems

Board to Board Series

organizer, memory modulesCar electronics: Car radios, mobile car phones,

portable diagnosticsMobile communication: Mobile phones, PDAs,

0.8mm Pitch Connectors

mobile car office equipmentControl engineering:

Light barriers, switchesSensor engineering:Medical engineering:

Electrical And Mechanical Characteristics

http://www.Coconn.com - MS 3 -

0.8mm Pitch ConnectorsBoard to Board Series

Electrical And Mechanical Characteristics

http://www.Coconn.com - MS 4 -

0.8mm Pitch ConnectorsBoard to Board Series

http://www.Coconn.com

0.8mm Pitch Connectors

6 Pin Single Row Version

The SMT 0.8 Pitch Connectors Board to Board Series with 0.8mm pitch and with SMT termination is based on a hermaphroditic design. As result of this the male and female connector are identical. The same style for male and female connector meet the requirement for a economical connector solution in modern applications in electronics. The dual-sided PCB application contact principle provides for a tilt-proof and insertion-proof connector position on the PCB. The gripper surface is integrated within the insulator body. The obviates the need for the standard assembly hood. Optionally, version featuring positioning pegs are also available. Using the 0.8mm Pitch Connectors board-to-board series height from 5.0mm up to 6.5mm is achieved.

Board to Board Series

- MS 5 -

Configuration Height No. ofPins

5 - 6.5mm 6

5 - 6.5mm 6

http://www.Coconn.com - MS 6 -

Board to Board Series

Part Number

MS0601

MS0612

0.8mm Pitch Connectors

http://www.Coconn.com

Board to Board Series

- MS 7 -

0.8mm Pitch Connectors

12 Pin Single Row Version

The SMT 0.8 Pitch Connectors Board to Board Series with 0.8mm pitch and with SMT termination is based on a hermaphroditic design. As result of this the male and female connector are identical. The same style for male and female connector meet the requirement for a economical connector solution in modern applications in electronics. The dual-sided PCB application contact principle provides for a tilt-proof and insertion-proof connector position on the PCB. The gripper surface is integrated within the insulator body. The obviates the need for the standard assembly hood. Optionally, version featuring positioning pegs are also available. Using the 0.8mm Pitch Connectors board-to-board series height from 5.0mm up to 6.5mm is achieved.

Configuration Height No. ofPins

5 - 6.5mm 12

5 - 6.5mm 12

http://www.Coconn.com

0.8mm Pitch Connectors

MS1212

12 Pin Single Row Version

- MS 8 -

Board to Board Series

Part Number

MS1201

http://www.Coconn.com

0.8mm Pitch Connectors

50 Pin Dual Row Version

The SMT 0.8 Pitch Connectors Board to Board Series with 0.8mm pitch and with SMT termination is based on a hermaphroditic design. As result of this the male and female connector are identical. The same style for male and female connector meet the requirement for a economical connector solution in modern applications in electronics. The dual-sided PCB application contact principle provides for a tilt-proof and insertion-proof connector position on the PCB. The gripper surface is integrated within the insulator body. The obviates the need for the standard assembly hood. Optionally, version featuring positioning pegs are also available. Using the 0.8mm Pitch Connectors board-to-board series height from 5.0mm up to 6.5mm is achieved.

Board to Board Series

- MS 9 -

Configuration Height No. ofPins

5 - 6.5mm 50

5 - 6.5mm 50

http://www.Coconn.com

0.8mm Pitch Connectors

MS5012

50 Pins Dual Row Version

- MS 10 -

Board to Board Series

Part Number

MS5001

http://www.Coconn.com

0.8mm Pitch Connectors

Packaging

Board to Board Series

- MS 11 -

Misalignment Tolerances longitudinal: ±0.7mm; transverse: ±0.5mm

Angular Inclination tolerances longitudinal: ±4°; transverse:±4°

http://www.Coconn.com

0.8mm Pitch ConnectorsBoard to Board Series

- MS 12 -

"Board to Board" Height distance: 5.0-6.5mm

All

dim

ensi

ons

in m

m

Mating Conditions for0.8mm Pitch Connectors Borad to Borad series

0.8mm Pitch Connectors

Part Number Index

Part NumberMS0601 MS 6MS0612 MS 6MS1201 MS 8MS1212 MS 8MS5001 MS 10MS5012 MS 10

http://www.Coconn.com

Board to Board Series

Page

- MS 13-