:063 $0.1-&5& .1-/5 40-650/ - implant know-how llc• 17 centers • 3,538 implants •...

1000 Corporate Drive P.O. Box 770 Marshfield, WI www.argondentalusa.com 1.844.484.4998

&

Quality

Made in GermanyDesign

Product Catalog

Joel A. GonzalesDirector of Sales and Service USA

480.440.3927 | [email protected]

For over 15 years, Argon has been a pioneer in the

implant industry.

To ensure the highest quality product, Argon Dental

handles all stages of implant manufacturing from

engineering to packaging. This also includes

independently testing our product lots for surface

analysis impurities. This makes us unique, as other

implant manufacturers only test a portion of their lots.

Located in Germany and our U.S. distribution center

in Wisconsin, we are here to assist you with all of

your implant needs.

Welcome to the Argon Experience…

www.argondentalusa.com

1.844.484.4998

For more information about our products & services, call 1.844.484.4998 • www.argondentalusa.com 3

WHY K3PRO? K3Pro Implant Advantages

Rapid Implant

Sure Implant

University of Frankfurt StudyUnder load conditions of 200 Ncm, independent x-ray analysis testing showed that there was no movement of the abutment in the implant, thus no micro-gap. The abutment and implant are so tight that it creates a bacterial seal between the two.

(Microradiography - High Resolution Presentation Dr. Paul Weigl University of Frankfurt)

K3Pro Success Rate • Interdisciplinary 6 year multicenter study in Germany

• 17 Centers

• 3,538 Implants

• 98.3% success rate

K3Pro Implant SystemsThe K3Pro implant system has a unique conical press-fit connection. The K3Pro implant system connects the implant and the abutment with a 1.5° (total 3°) Morse taper, this gives an optimal load displacement from the abutment to the implant.

The Morse 1.5° taper connection also offers a bacterial seal which is free from micro-movement and micro-gaps. This results in an implant that maintains bone height, tissue health and long term stability.

Two parallel 180° offset threads for faster

insertion and larger surface area

Self-tapping threads and cutting

grooves allow for easy insertion and

optimum initial stabilization.

Apical thread for ideal and faster

bone-remodeling

Conical thread design

1.2mm anti-rotational hexagon

Compression thread for higher primary stability

1.5° self-lock Morse taper conical connection

OsteoActive® surfacefor faster and ensured

osseointegration

Sloping shoulder design with micro-groove surface and

sub-crestal insertion, allows for the bone to

grow up over the top of the implant.

Conical Connection

Abutment screw with spiral, self-clamping thread

Implant Features:• Sloping shoulder design with micro-groove surface• The sloping shoulder and sub-crestal insertion allowsfor the bone to grow up over the top of the implant

• Self-tapping threads and cutting grooves allowfor easy insertion and optimum initial stabilization

Rapid Implant Sizes:Platform Diameters(mm) Lengths(mm)2mm Red 3.0 & 3.5 9, 11, 13, 15, 173mm Yellow 4.0 & 4.5 8, 9, 11, 13, 15, 17

5.0 8, 9, 11, 136.0 8, 9

Argon Dental USA • 1000 Corporate Drive Marshfield, WI 544494

K3PRO RAPID IMPLANTS

Implant Features:• The sloping shoulder and sub-crestal insertion allowsfor the bone to grow up over the top of the implant

• Cylindrical thread design for larger surface area andbone contact in upper 1/3 of implant

• Round apical thread makes it ideal for sinus proceduresand faster bone-remodeling

Sure Implant Sizes:Platform Diameters(mm) Lengths(mm)2mm Red 3.0 & 3.5 9, 11, 133mm Yellow 4.0 & 4.5 8, 9, 11, 13

5.0 8, 9, 11, 136.0 8, 9

Sloping shoulder for larger

surface area

Two parallel 180° offset threads for

faster insertion and larger surface area

Cylindrical thread design for larger surface area and

bone contact in upper 1/3 of

implant.

Round apical thread makes it ideal for sinus procedures and faster bone-

remodeling

Conical implant body design


Compression thread for higher primary stability

Conical Connection

1.5° self-lock morse taper conical connection

OsteoActive® surfacefor faster and ensured

osseointegration



K3PRO SURE IMPLANTS

Implant Features:• 3mm Short Blue Platform• Square threads for stability• Ideal for maxilla cases to avoid the sinus• Ideal for mandible cases for shallow nerves• Can be guided using Precision Kit

Short Implant Sizes:Platform Diameters(mm) Lengths(mm)Short Blue 4.0, 4.5, 5.0, 6.0 5.5, 6.5, 7.5


Morse taper offers bacterial seal

1.5° self-lock morse taper conical connection


K3PRO SHORT IMPLANTS


Self-tapping thread for easy insertion

Two parallel 180° offset threads for faster

insertion and larger surface area

Self-tapping threads and cutting

grooves allow for easy insertion and

optimum initial stabilization.

Sloping shoulder design with micro-groove surface and

sub-crestal insertion, allows for the bone to

grow up over the top of the implant.

To ensure the highest quality Argon Dental handles all stages of implant manufacturing from engineering to packaging. Argon Dental components are held to a high standard and are independently tested.

Argon’s quality assurance program tests each lot, conducting a surface analysis for impurities, unlike other implant manufacturers who only test a part of their lots.


QUALITY MADE IN GERMANY

2010 - Before implant is placed 2011 - Implant is placed

2011 - Implant X-ray at placement

2015 - X-ray showing bone integration after 5 years

2011 - Results at placement 2015 - Cosmetic results after 5 years

Case Example


MAINTAIN BONE WITH K3PRO


OUR SERVICES

Argon Dental USA accepts credit card payments (Visa, Mastercard, Discover or American Express). Payments can be made by contacting us directly at 1.844.484.4998.

We offer several continuing education credit opportunities for doctors and their staff throughout the year.

Topics include:• Implant 101 - CT Guided Implant Placement• Implant 201 - Immediate Extraction Implant Placement• Bone Grafting - Socket Preservation & Immediate Implant

Placement with Bone Grafting• Bone Grafting - Place an Implant with a sinus bump and

performing a ridge augmentation (Topics are subject to change without notice.)

For a list of our seminars, visit www.argondentalusa.com and click on “Education.” To register, contact us at 1.844.484.4998

D.C. Academy Topics include:1. Argon Surgical Kit Training2. CT Guided Surgery Process3. Argon Impression Taking and Abutments

…and much more! (Topics are subject to change without notice.)

For more information, contact us at 1.844.484.4998.

As a member of the Argon family, you have access to several free educational programs catered to your staff.

Education

Seminars

Shipping and Receiving Payment Options

FedEx delivers our Argon products to your office anywhere in the U.S.


K3PRO IMPLANTS - PACKAGING

1 The implant is stored in a container made of PEEK material.

2 While wearing the appropriate surgical attire, remove the implant from the container, hold the container vertically, removing the plastic cover screw cap.

3 While pinching the sides of the container, place the insertion instrument into the implant so that the marker line disappears. This ensures that the instrument is correctly seated in the hexagon on the inside of the implant.

4 Release the tension on the carrier to remove the implant from the container. Then place the implant inserter into your hand-piece.

Removing the implant from the package and container

4321

Easy to open box

PEEK cover screw cap

Implant

Implant carrier

Cover screw

Implant inserter

The red stripe on the right side of box indicates 2mm platform

The yellow stripe on the right side of box indicates 3mm platform


K3PRO IMPLANTS - IMPLANT INSERTION

Recommended Insertion Torque levels for implants

2mm - min. 25 Ncm (max. 35 Ncm)

3mm - Standard/Wide: 35 Ncm (max. 45 Ncm)

Torque Wrench(included)

Motor Driver

OsteoScrewinsertion handle

(included in prosthetic kit)

Ratchet Adaptor

Ratchet Extension

Hand Ratchets Inserter Contra Angles

2mm Red Platform Short 3mm Blue Platform

2mm Red Platform 3mm Yellow Platform

Available Lengths

9.0 mm11.0 mm13.0 mm15.0 mm17.0 mm

8.0 mm9.0 mm

11.0 mm13.0 mm15.0 mm17.0 mm

LengthLength


K3PRO IMPLANTS - PLATFORM DESIGN

Short 3mm Blue Platform

5.5 mm6.5 mm7.5 mm

Length

3mm Yellow Platform

Available Diameters

3.0mm 3.5mm 4.0mm 4.5mm 5.0mm 6.0mm


RAPID & SURE IMPLANTS

K3Pro “Rapid” Implant with 2mm WellDiameter x Length3.0 x 9.0mm 30009K3Pro.R3.0 x 11.0mm 30011K3Pro.R (shown)

3.0 x 13.0mm 30013K3Pro.R3.0 x 15.0mm 30015K3Pro.R3.0 x 17.0mm 30017K3Pro.R3.5 x 9.0mm 35009K3Pro.R3.5 x 11.0mm 35011K3Pro.R3.5 x 13.0mm 35013K3Pro.R3.5 x 15.0mm 35015K3Pro.R3.5 x 17.0mm 35017K3Pro.R

K3Pro “Rapid” Implant with 3mm WellDiameter x Length4.0 x 8.0mm 40008K3Pro.R4.0 x 9.0mm 40009K3Pro.R4.0 x 11.0mm 40011K3Pro.R (shown)

4.0 x 13.0mm 40013K3Pro.R4.0 x 15.0mm 40015K3Pro.R4.0 x 17.0mm 40017K3Pro.R4.5 x 8.0mm 45008K3Pro.R4.5 x 9.0mm 45009K3Pro.R4.5 x 11.0mm 45011K3Pro.R4.5 x 13.0mm 45013K3Pro.R4.5 x 15.0mm 45015K3Pro.R4.5 x 17.0mm 45017K3Pro.R5.0 x 8.0mm 50008K3Pro.R5.0 x 9.0mm 50009K3Pro.R5.0 x 11.0mm 50011K3Pro.R5.0 x 13.0mm 50013K3Pro.R6.0 x 8.0mm 60008K3Pro.R6.0 x 9.0mm 60009K3Pro.R

K3Pro “Sure” Implant with 2mm WellDiameter x Length3.0 x 9.0mm 30009K3Pro.S3.0 x 11.0mm 30011K3Pro.S (shown)

3.0 x 13.0mm 30013K3Pro.S3.5 x 9.0mm 35009K3Pro.S3.5 x 11.0mm 35011K3Pro.S3.5 x 13.0mm 35013K3Pro.S

K3Pro “Sure” Implant with 3mm WellDiameter x Length4.0 x 8.0mm 40008K3Pro.S4.0 x 9.0mm 40009K3Pro.S4.0 x 11.0mm 40011K3Pro.S (shown)

4.0 x 13.0mm 40013K3Pro.S 4.5 x 8.0mm 45008K3Pro.S4.5 x 9.0mm 45009K3Pro.S4.5 x 11.0mm 45011K3Pro.S4.5 x 13.0mm 45013K3Pro.S5.0 x 8.0mm 50008K3Pro.S5.0 x 9.0mm 50009K3Pro.S5.0 x 11.0mm 50011K3Pro.S5.0 x 13.0mm 50013K3Pro.S6.0 x 8.0mm 60008K3Pro.S6.0 x 9.0mm 60009K3Pro.S

Implant Membrane Fixation Screw Height for 2mm Well0mm IKAS_35000.2 (shown)

1mm IKAS_35010.22mm IKAS_35020.23mm IKAS_35030.2

Cover Screws 2mm Platform(included with implant)

VSK2K

0mm IKAS_45000.3 (shown)

1mm IKAS_45010.32mm IKAS_45020.33mm IKAS_45030.3

Cover Screws 3mm Platform(included with implant)VSK3K

Rapid Implants2mm (red) Platform

Rapid Implants3mm (yellow) Platform

Sure Implants2mm (red) Platform

Sure Implants3mm (yellow) Platform

Membrane Screw2mm (red) Platform

Membrane Screw3mm (yellow) Platform

Implant Membrane Fixation Screw Height for 3mm Well



Implants & G

ingiva Formers


SHORT IMPLANTS

K3Pro “Short” Implant Diameter x Length

4.0 x 5.5mm 40055K3Pro.R/Short (shown)

4.0 x 6.5mm 40065K3Pro.R/Short4.0 x 7.5mm 40075K3Pro.R/Short4.5 x 5.5mm 45055K3Pro.R/Short4.5 x 6.5mm 45065K3Pro.R/Short4.5 x 7.5mm 45075K3Pro.R/Short5.0 x 5.5mm 50055K3Pro.R/Short5.0 x 6.5mm 50065K3Pro.R/Short5.0 x 7.5mm 50075K3Pro.R/Short6.0 x 5.5mm 60055K3Pro.R/Short6.0 x 6.5mm 60065K3Pro.R/Short6.0 x 7.5mm 60075K3Pro.R/Short

Short ImplantsShort (blue) Platform

Cover Screws Short Platform(included with implant)

VSK3K_S

Titanium Abutment (TA)2mm (red) Platform

Titanium Gingiva Former with 2mm WellDiameter x Length

3.0 x 2.0mm TA30020+NH/23.0 x 4.0mm TA30040+NH/2 (shown)

3.0 x 6.0mm TA30060+NH/24.0 x 0.5mm TA40005+NH/24.0 x 2.0mm TA40020+NH/24.0 x 4.0mm TA40040+NH/24.0 x 6.0mm TA40060+NH/25.0 x 2.0mm TA50020+NH/25.0 x 4.0mm TA50040+NH/25.0 x 6.0mm TA50060+NH/2

Titanium Abutment (TA)3mm (yellow) Platform

Titanium Gingiva Former with 3mm WellDiameter x Length

4.0 x 2.0mm TA40020+NH/34.0 x 4.0mm TA40040+NH/3 (shown)

4.0 x 6.0mm TA40060+NH/35.0 x 0.5mm TA50005+NH/35.0 x 2.0mm TA50020+NH/35.0 x 4.0mm TA50040+NH/35.0 x 6.0mm TA50060+NH/36.0 x 2.0mm TA60020+NH/36.0 x 4.0mm TA60040+NH/36.0 x 6.0mm TA60060+NH/3

Gingiva Formers (TA)Available in metal or plastic.

Titanium•Platform seated abutment for easy manipulation•Metal abutment available in multiple heights and diameters

PEEK•Platform seated abutment for easy manipulation•PEEK can be easily adjusted chairside for custom

tissue healing•Two-piece gingival former in plastic and 1.5" taper

for use with screw•Available in multiple heights and diameters

PEEK Abutment (TA)2mm (red) Platform

PEEK Gingiva Former with 2mm WellDiameter x Length

4.0 x 2.0mm TA40020/24.0 x 4.0mm TA40040/2 (shown)

4.0 x 6.0mm TA40060/26.0 x 2.0mm TA60020/26.0 x 4.0mm TA60040/26.0 x 6.0mm TA60060/2

K3Pro Abutment Screw 2mm, Set of 2

Set of 2 ETS.K3Pro/2.Set

PEEK Abutment (TA)3mm (yellow) Platform


6.0 x 0.5mm TA60005/36.0 x 2.0mm TA60020/36.0 x 4.0mm TA60040/3 (shown)



Set of 2 ETS.K3Pro/3.Set

Gingival height

Titanium Abutment (TA)one piece

Rapid Implant

Sure Implant

PEEK Abutment (TA) two piece

Gingival height


GINGIVA FORMERS

Torque Recommendations

10 Ncm(2mm platform peek or

titanium)

15 Ncm(3mm & short platform

peek or titanium)


GINGIVA FORMERS

PEEK Abutment (TA)Short (blue) Platform


Set of 2 AS.K3Pro_S1.6/Set


6.0 x 0.5mm TA60005/36.0 x 2.0mm TA60020/36.0 x 4.0mm TA60040/3 (shown)



PROSTHETIC & IMPRESSION COMPONENTS

In this section you will find the following Prosthetic and Impression Components:

Prosthetic & Impression

Components

Impression Components•Open & Closed Tray Impression Components . . . . . . . . . . . .18-19•Implant Analogs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19•Temporary Abutments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-24

Crown & Bridge - Screw Retained•VBA - Transmucosal Abutments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25-28•EAZ - Lingual Screw-Retained Abutments . . . . . . . . . . . . . . . . .29-31•KSA - Ti-Base Abutments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-37•CS - Cerec Abutments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-40•MB - Multi-Base Abutments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41-44

Crown & Bridge - Cement Retained•Abutment Screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21•AA - Anatomic Abutments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-34•KSA - Ti-Base Abutments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-37•CS - Cerec Abutments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-40•EAK - Preform Abutments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45-47

Overdenture•VBA - Transmucosal Abutments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25-28•MB - Multi-Base Abutments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41-44•FLA - Finder Abutments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48-50•KKA - O-Ring Abutments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51-52

Scan Post•Scan Post - Titanium and PEEK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53-54

Impression Components


IMPRESSION COMPONENTS

Open Tray Impression

•Rapid or Sure implants

•Open transfer posts available in red and yellow platforms

•Available in short and long lengths

•Transfer post screw included

Closed Tray Impression

•Rapid or Sure implants

•Must be used with respective transfer cap (red for 2mm platform and yellow for 3mm platform)

•Plastic transfer caps can be easily modified

Aluminum Screw

Transfer Pin for Open Tray

Transfer Cap

Transfer Pin for Closed Tray

Rapid Implant

SureImplant


5 - 10 Ncm

Open Tray

Closed Tray

(screw included)

OT_K3Pro/2.Set OT_K3Pro/2_L.Set

Transfer for Open Tray Impression2mm (red) Platform


IMPRESSION COMPONENTS

Transfer for Closed Tray Impression2mm (red) Platform

Standard - ETK3Pro/2.Set Long - ETK3Pro/2_L.Set

(screw included)

LAK3Pro/2

Implant Analog2mm (red) Platform

EA.TK40_k

(screw included)

OT_K3Pro/3.Set OT_K3Pro/3_L.Set

Transfer for Open Tray Impression3mm (yellow) Platform

Transfer for Closed Tray Impression3mm (yellow) Platform

Standard - ETK3Pro/3.Set Long - ETK3Pro/3_L.Set

(screw included)

LAK3Pro/3

Transfer Cap Short for Closed Tray Impression3mm (yellow) PlatformImplant Analog

3mm (yellow) Platform

EA.TK50_k

LAK3Pro/ShortStandard - ETK3Pro/3.Alu.SetOT_K3Pro/3_S.Set

(screw included)

Transfer for Open TrayShort (blue) Platform

Implant AnalogShort (blue) Platform

(screw included)

and Short (blue) Platform

Transfer Cap Short for Closed Tray Impression2mm (red) Platform

Transfer for Closed TrayShort (blue) Platform

TPA

Temporary Abutments (TPA)


TEMPORARY ABUTMENTS

Temporary PEEK Abutment

Rapid Implant

PEEK

•Provisional dental prosthesis abutment

•A simple, esthetic and long-term solution for soft tissue management during the healing period

•Abutment contour can be individually adapted, prepped or milled

•PEEK polymer material can be modified

•Expanded indication up to 180 days in the mouth

Titanium


•A simple, esthetic and long-term solution for soft tissue management during the healing period


•Expanded indication up to 180 days in the mouth

Temporary Titanium Abutment

Rapid Implant


5 - 10 Ncm(2mm platform)


Temporary Abutments (TPA)3mm (yellow) Platform - 14mm Height

PEEK - 4.5mm Titanium - 4.5mm

AS.K3Pro_S1.6/Set

K3Pro Abutment Screw 3mm (Set of 2)

ETS.K3Pro/3.Set

K3Pro Abutment Screw Short (Set of 2)

Temporary Abutments (TPA)2mm (red) Platform - 14mm Height

TPA3514.H/2Pro.P TPA3514.H/2Pro.T

PEEK - 3.5mm Titanium - 3.5mm


TEMPORARY ABUTMENTS

and Short (blue) Platform - 14mm Height


ETS.K3Pro/2.Set

TPA4514.H/3Pro.P TPA4514.H/3Pro.T

s PA

Temporary Abutments (PA)

Rapid Implant


TEMPORARY ABUTMENTS

Gingiva Cap for

Provisional Abutments

Short Transfer Cap for Closed Tray Impressions

Provisional Abutment 2mm

Abutment Screw(not included)

Gingival height

Available Gingival Heights

Available Angulations


(GH) - 1.5 0º - 10º - 15º 5-10 Ncm (2mm platform)

10-15 Ncm(3mm platform)



•Red or Yellow Transfer caps allow for exact closed tray impressions

•Provisional Gingival caps are also available

•Transfer cap sold separately

EAK_A4.0


EA.TK40_k

Preform Abutment Analog

GK_PA40050


ETS.K3Pro/2.Set

Gingiva Cap for Provisional Abutments (diameter x length)

PA4000

PA Angulation

0°

10°

15°

PA401015

PA401515


TEMPORARY ABUTMENTS

GK_PA40060

4.0 x 5.0mm 4.0 x 6.0mm

Temporary Abutments (PA)2mm (red) Platform - Diameter x Gingival Height, Angulation

4.0 x 1.5mm

EAK_A5.0EA.TK50_k


GK_PA50060

K3Pro Abutment Screw 3mm (Set of 2) Gingiva Cap for Provisional Abutments (diameter x length)

PA5000

PA Angulation

0°

10°

15°

PA501015

PA501515

GK_PA50070

5.0 x 6.0mm 5.0 x 7.0mm

ETS.K3Pro/3.Set

AS.K3Pro_S1.6/Set


TEMPORARY ABUTMENTS


Temporary Abutments (PA)3mm (yellow) Platform - Diameter x Gingival Height, Angulation

5.0 x 1.5mm

and Short (blue) Platform - Diameter x Gingival Height, Angulation


Straight 2mm RapidFix Abutment

Angled 3mm RapidFix Abutment

Rapid Implant

SureImplant


CROWN & BRIDGE SCREW RETAINED ABUTMENTS

VBA

•Available overdenture and screw-retained prosthesis (i.e. crowns, bridges and bar)

•Do not use in single tooth restorations, except splinted prosthesis

•All abutments require a prosthetic screw (not included)

•All straight transmucosal VBA abutments require a transmucosal insertion instrument

•All angled abutments require an abutment screw (not included)

•Abutments cannot be altered

Transmucosal Abutments (VBA)




(GH) 0.5 - 1.5 - 2.5 - 3.5

0º - 20º - 30º

15 - 20 Ncm (abutment)5 - 10 Ncm on

prosthetic screw(2mm platform)

25 - 30 Ncm (abutment)5 - 10 Ncm on

prosthetic screw(3mm platform)


AAA_K3Pro/2.1


ETS.K3Pro/2.Set

Abutment Removal Tool

Transmucosal Abutments (VBA)2mm (red) Platform - Diameter x Gingival Height, Angulation

VBA500005.H/2Pro VBA500015.H/2Pro VBA500025.H/2Pro VBA500035.H/2Pro

VBA Angulation

0°

20°

30°





5.0 x 0.5mm 5.0 x 1.5mm 5.0 x 2.5mm 5.0 x 3.5mm


VBA Angulation

0°

0°

VBA500005.H/3Pro_S VBA500015.H/3Pro_S VBA500025.H/3Pro_S VBA500035.H/3Pro_S

Short (blue) Platform - Diameter x Gingival Height, Angulation



3mm (yellow) Platform - Diameter x Gingival Height, Angulation


VBA Angulation

20°

30°


Short (blue) Platform - Diameter x Gingival Height, Angulation

AAA_K3Pro/3ETS.K3Pro/3.Set

Abutment Removal Tool

AS.K3Pro_S1.6/Set


Transmucosal Abutments (VBA)3mm (yellow) Platform - Diameter x Gingival Height, Angulation

5.0 x 0.5mm 5.0 x 1.5mm 5.0 x 2.5mm 5.0 x 3.5mm


VBA_RH.3VBA_RH.2

Prosthetic Screw for VBA Transmucosal Abutments

HSVBA_1.6 VBA_KK01

Transmucosal Glue Cap

VBA_LK01

Transmucosal 5.0mm Gingiva Form Cap

VBA50000GV

VBA_OTK50/set

Transmucosal Transfer Cap and Fixation Screw

VBA_GTK50

Open Tray Impression

EA.TK50_k VBA_LA50

Transmucosal Abutment/ImplantPositioning Guide 3mm (yellow) Platform


Transmucosal Abutment/ImplantPositioning Guide 2mm (red) Platform

Transmucosal/Bar Base Abutment CapPEEK Titanium POM

VBA50000PKK.PK VBA50000PKK.T VBA50000PKK.POM

HSLA Elitor NSL

VBA50000PKK.HSLA VBA50000PKK.Elitor



Closed Tray Impression

Short Transfer Cap for Closed Tray Impressions (3mm)

Transmucosal Abutment Analog

Locator Finder Cap

Components below are available for use on all VBA Abutments- 2mm Red, 3mm Yellow & Short Blue Platforms

VBA_HREI2_3

Transmucosal Insertion Instrument Contra Angle Connection

VBA_EI2_3

Transmucosal Instrument for Hand/Ratchet Insertion

EAZ

•This abutment is ideal for screw-retained crowns as it avoids the occlusal access hole

•Horizontal lingual set screw fixes the crown to the abutment

•Abutment requires a horizontal lingual set screw and screw ring (not included)

•30° abutments are to be used in splint restorations only, do not use in single tooth restorations

Lingual Screw-Retained Abutments (EAZ)



Lingual Screw-retained

Abutment

Horizontal Lingual Set Screw

Gingival Height

Screw Ring




(GH) 0.5 - 1.5 mm 0º - 10º - 20º - 30º 15 - 20 Ncm(2mm platform)


EAZ.TS1.4

ETS.K3Pro/2.Set

Lingual Screw-retained Abutments (EAZ)2mm (red) Platform - Diameter x Gingival Height, Angulation

EAZ_TV400005.H/2Pro EAZ_TV400015.H/2Pro

EAZ Angulation

0°

10°

20°

30°





EAZ.SK1.4/Cast EAZ.SK1.4/POM


4.0 x 0.5mm 4.0 x 1.5mm

Lingual Screw for EAZ Abutments Screw Ring Cast & POM for EAZ Abutments


Lingual Screw-retained Abutments (EAZ)3mm (yellow) Platform - Diameter x Gingival Height, Angulation



ETS.K3Pro/3.Set AS.K3Pro_S1.6/Set

5.0 x 0.5mm 5.0 x 1.5mm




EAZ Angulation

0°

10°

20°

30°



EAZ.TS1.4 EAZ.SK1.4/Cast EAZ.SK1.4/POM


Lingual Screw for EAZ Abutments Screw Ring Cast & POM for EAZ Abutments


AA

Anatomic Abutments (AA)

•Abutment is ideal for cemented dental prosthesis

•Abutment can be individually prepped or milled

•Anatomical abutment shoulder is ideal for highly esthetic cases

•1.5° conical connection for stability and bacterial seal

•30° abutments are to be used in splint restorations only, do not use in single tooth restorations


CROWN & BRIDGE CEMENT RETAINED ABUTMENTS


Anatomic Abutment 2mm

Anatomic Abutment 3mm


SureImplant

Rapid Implant




0.5 - 1.5 - 3.0 - 4.5 mm 0º - 10º - 20º - 30º 15 - 20 Ncm(2mm platform)


Anatomic Abutments (AA)2mm (red) Platform - Diameter x Gingival Height, Angulation

AA400005.H/2Pro AA400015.H/2Pro

AAAngulation

0°

10°

20°

30°

AA401005.H/2Pro AA401015.H/2Pro

AA402005.H/2Pro AA402015.H/2Pro

AA403005.H/2Pro AA403015.H/2Pro

4.0 x 0.5mm 4.0 x 1.5mm




ETS.K3Pro/2.Set

AA400030.H/2Pro AA400045.H/2Pro

AA401030.H/2Pro AA401045.H/2Pro

AA402030.H/2Pro AA402045.H/2Pro

AA403030.H/2Pro AA403045.H/2Pro

4.0 x 3.0mm 4.0 x 4.5mm

Anatomic Abutments (AA)3mm (yellow) Platform - Diameter x Gingival Height, Angulation




AA500005.H/3Pro AA500015.H/3Pro

AA Angulation

0°

10°

20°

30°

AA501005.H/3Pro AA501015.H/3Pro

AA502005.H/3Pro AA502015.H/3Pro

AA503005.H/3Pro AA503015.H/3Pro

4.0 x 0.5mm 4.0 x 1.5mm

AA500030.H/3Pro AA500045.H/3Pro

AA501030.H/3Pro AA501045.H/3Pro

AA502030.H/3Pro AA502045.H/3Pro

AA503030.H/3Pro AA503045.H/3Pro

4.0 x 3.0mm 4.0 x 4.5mm


K3Pro Abutment Screw 3mm (Set of 2) K3Pro Abutment Screw Short (Set of 2)

KSA

Ti-Base Abutments (KSA)

•Abutment for fabrication of an individual cemented or screw retained Zirconium prostheses with emergence profile using CAD-CAM techniques

•Scan caps and scan bodies available for a digitized implant positioning and abutment placement

•Anti-rotational scan cap assured by a notch at the base of the abutment

•Circular platform of the abutment fulfills the highest esthetic demands

•Abutment cylinder height ensures a good cemented connection of the milled Zirconium structure

•Available in different gingival heights and angulations


CROWN & BRIDGE SCREW OR CEMENT RETAINED ABUTMENTS

Rapid Implant

KSA Abutment3mm

SureImplant

KSA Abutment 2mm







0.5 - 1.5 - 2.5 mm 0º - 10º - 20º 15 - 20 Ncm(2mm platform)


Ti-Base Abutments (KSA)2mm (red) Platform - Diameter x Gingival Height, Angulation

KSA Angulation

0°

10°

20°


KSA_PT4.0

POM Cap for Glue/Scan Abutment

KSA_K4.0

PEEK Cap for Glue/Scan Abutment


ETS.K3Pro/2.Set

KSA400005.H/2Pro KSA400015.H/2Pro KSA400025.H/2Pro



4.0 x 0.5mm 4.0 x 1.5mm 4.0 x 2.5mm


Ti-Base Abutments (KSA)3mm (yellow) Platform - Diameter x Gingival Height, Angulation


KSA500005.H/3Pro KSA500015.H/3Pro


5.0 x 0.5mm 5.0 x 1.5mm



KSA Angulation

0°

10°

20°


K3Pro Abutment Screw 3mm (Set of 2) K3Pro Abutment Screw Short (Set of 2)

KSA500025.H/3Pro

5.0 x 2.5mm

KSA501025.H/3Pro

KSA502025.H/3Pro

KSA_PT4.0

POM Cap for Glue/Scan Abutment

KSA_K4.0

PEEK Cap for Glue/Scan Abutment


CS

Cerec Abutments (CS)


Rapid Implant

CS Abutment 2mm



•Abutment for chairside fabrication of cemented or screw retained ceramic prostheses using CEREC technology

•Scan bodies for Bluecam S and Omnicam S available for a digitized implant positioning and abutment placement

•Anti-rotational scan body assured by a notch at the base of the abutment

•Circular platform of the abutment fulfills the highest esthetic demands

•Abutment cylinder height ensures a good cemented connection of the milled Zirconium structure




0.5 - 1.5 mm 15 - 20 Ncm(2mm platform)


Scanbodies - 2mm


ETS.K3Pro/2.Set

CS400005.H/2Pro

CS Angulation

0°

CROWN & BRIDGE SCREW OR CEMENT RETAINED ABUTMENTSCerec Abutments (CS)

2mm (red) Platform - Diameter x Gingival Height, Angulation

4.0 x 0.5mm

CS400015.H/2Pro

4.0 x 1.5mm

109007 109009


Bluecam S Omnicam S


CS400005.H/3Pro

CS Angulation

0°




Cerec Abutments (CS)3mm (yellow) Platform - Diameter x Gingival Height, Angulation

4.0 x 0.5mm


Scanbodies - 3mm

CS400015.H/3Pro

4.0 x 1.5mm

CS450005.H/3Pro

4.5 x 0.5mm

CS450015.H/3Pro

4.5 x 1.5mm


109007 109009

Bluecam S Omnicam S

MB

•Removable overdenture abutment and screw retained prosthesis ( i.e. crowns, bridges and bar)

•1.5° Conical Connection

•Each multi-base abutment connector requires a screw specific to the gingival height

•Abutments may not be changed, milled or prepped

Multi-Base Abutments (MB)


ABUTMENTS

Multi-Base Abutment

Titanium Finder Cap

Screw for Multi-Base Connector

(sold separately)

Rapid Implant

Lasering method (titanium)




MB.A400010.NH/2Pro MB.A400020.NH/2Pro MB.A400030.NH/2Pro


ABUTMENTS

MB.S400010/2Pro MB.S400020/2Pro MB.S400030/2Pro

RS_LA AAA.MB.VBA_K3Pro/2

MB.TH_1.4/2ProMB.PH_1.4/2ProMB.KH_1.4/2Pro MB.LK_1.4/2Pro

Multi-Base Abutments (MB) (non-hex)2mm (red) Platform - Diameter x Gingival Height

40 x 1.0mm 4.0 x 2.0mm 4.0 x 3.0mm

Screw for Multi-Base Connector(corresponding screw needed with abutment)

Glue, POM, or Titanium Sleeve - Finder Cap

Multi-Base Abutment Accessories

Abutment Cap for Open & Closed Tray Impression Analog

Open - MB.OTK_1.4/2Pro Closed - MB.GTK_1.4/2Pro MB.LA_1.4/2Pro

Sealing Pin for Open Tray

Scan Cylinder Titanium Lab Analog Screw

MB.OTVS_1.4/2Pro

MB.SZT_1.4/2Pro MB.SZP_1.4/2Pro MB.LS_1.4/2Pro

Scan Cylinder PEEK

Rapid Surgery Guide/Adaptor for Sleeves Abutment Removal Tool

Cover Cap

MB.VK_1.4/2Pro


MB.S400010/3Pro MB.S400020/3Pro MB.S400030/3Pro



Multi-Base Abutments (MB) (non-hex)3mm (yellow) Platform - Diameter x Gingival Height

40 x 1.0mm 4.0 x 2.0mm 4.0 x 3.0mm







MB.OTVS_1.6/3Pro


Scan Cylinder PEEK



ABUTMENTS

Cover Cap

MB.VK_1.6/3Pro



MB.S400010/3Pro_S MB.S400020/3Pro_S MB.S400030/3Pro_S



Multi-Base Abutments (MB) (non-hex)Short (blue) Platform - Diameter x Gingival Height

40 x 1.0mm 4.0 x 2.0mm 4.0 x 3.0mm







MB.OTVS_1.6/3Pro


Scan Cylinder PEEK



ABUTMENTS

Cover Cap

MB.VK_1.6/3Pro


•For cement or screw-retained prosthetics

•The red 2mm platform is for single unit anterior teeth or posterior splinted restorations only

•Abutment can be individually prepped or milled

•Precision-Fit Snap caps for accurate closed tray transfer over the Abutment and Open Tray Transfer Post

•1.5° Conical Connection for stability and bacterial seal

Preform Abutments (EAK)


ABUTMENTS

Gingiva Cap for Provisional

Abutments


EAK Abutment 2mm


Rapid Implant

EAK




0.5 - 1.5 - 3.0 - 4.5 mm 0º - 10º - 15º 15 - 20 Ncm(2mm platform)


Preform Abutments (EAK)2mm (red) Platform - Diameter x Gingival Height, Angulation

EAK Angulation

0°

10°

15°


ABUTMENTS

EAK_A4.0


EA.TK40_k


GK_PA40050


ETS.K3Pro/2.Set

Gingiva Cap for Provisional Abutments (diameter x length)

GK_PA40060

4.0 x 5.0mm 4.0 x 6.0mm

EAK400005.H/2Pro EAK400015.H/2Pro EAK400030.H/2Pro EAK400045.H/2Pro



4.0 x 0.5mm 4.0 x 1.5mm 4.0 x 3.0mm 4.0 x 4.5mm




Preform Abutments (EAK)3mm (yellow) Platform - Diameter x Gingival Height, Angulation


EAKAngulation

0°

10°

15°

5.0 x 0.5mm 5.0 x 1.5mm 5.0 x 3.0mm 5.0 x 4.5mm


ABUTMENTS

EAK_A5.0EA.TK50_k


GK_PA50060

K3Pro Abutment Screw 3mm (Set of 2) Gingiva Cap for Provisional Abutments (diameter x length)

GK_PA50070

5.0 x 6.0mm 5.0 x 7.0mm

ETS.K3Pro/3.Set

AS.K3Pro_S1.6/Set



FLA

Finder Abutments (FLA)

•Removable overdenture restoration abutment

•1.5° conical connection for bacterial sealed connection with bone and papilla-retention

•Finder Insert Caps: inserts with various retentions


•Only for splinted prosthesis, do not use in single tooth restorations


ABUTMENTS

Finder Coping Titanium

Rapid Implant

FLA Finder Abutment

Finder Insert (Red)





Two-Part Finder Abutments (FLA)3mm (yellow) Platform - Gingival Height, Angulation 0°

Two-Part Finder Abutments (FLA)3mm (yellow) Platform - Gingival Height, Angulation 0°

AS.K3Pro_S1.6/Set


ETS.K3Pro/3.Set


Two-Part Finder Abutments (FLA)2mm (red) Platform - Gingival Height, Angulation 0°

FLA_15000H/2.ZT ETS.K3Pro/2.Set

ABUTMENTS

FLA05000+NH/2

0.5mm

FLA15000+NH/2

1.5mm

FLA25000+NH/2

2.5mm

FLA35000+NH/2

3.5mm

FLA45000+NH/2

4.5mm

FLA_15000H/3.ZT

FLA05000+NH/3

0.5mm

FLA15000+NH/3

1.5mm

FLA25000+NH/3

2.5mm

FLA35000+NH/3

3.5mm

FLA45000+NH/3

4.5mm

FLA_05000H/3.ZT

Abutment Screw required with this abutment.

K3Pro Abutment Screw 2mm (Set of 2)1.5mm

1.5mm0.5mm


Abutment Screw required with these abutments.

Components below are available for use on all FLA Abutments- 2mm Red, 3mm Yellow & Short Blue Platforms

FLCI_01

FLR_01/Set

Finder Insert (2 pieces)

FLR_04/Set

Clear - 5 lbs.

FLWE_k

FLA_01 FLAMI FLC_01

FLCS_01 FLCS_02

Finder Contra Angle InserterFinder Core Instrument


ABUTMENTS

FLR_08/Set

Finder AbutmentAnalog

Finder AngulationMeasurement Tool

Finder TransferCoping

Finder Chair-side Set with CopingRing Set Extended Set

Finder Block-Out Spacer (2 pieces)

Short Long

FLWE_L

Green - 4 lbs. Pink - 3 lbs. Orange - 2 lbs. Blue - 1.5 lbs. Red - 1 lb. Black - 1 lb.

FLR_02/Set FLR_05/Set FLR_03/Set FLR_06/Set FLR_07/Set

•Abutment for removable overdenture restorations

•Gingival & implant carried o-ring/ball-top prosthesis

•1.5° conical connection for bacterial sealed connection with bone and papilla-retention

•Primary Abutment: one-piece abutment with integrated screw

•O-Ring Caps: inserts with various retentions (open or closed)


•O-Rings available in 4 different degrees of hardness

O-Ring Abutments (KKA)

KKA


ABUTMENTS

O-Ring Cap(Open-Hard)

Rapid Implant

KKA O-Ring Abutment

O-Ring Retention (Green-Hard)



0.5 - 1.5 - 3.0 - 4.5 mm 15 - 20 Ncm(2mm platform)



O-Ring Abutments (KKA)3mm (yellow) Platform - Diameter, Angulation 0°

O-Ring Abutments (KKA)2mm (red) Platform - Diameter, Angulation 0°

O-Ring Abutments (KKA)Short (blue) Platform - Diameter, Angulation 0°

KKA0500+NH/2Pro

0.5mm

KKA1500+NH/2Pro

1.5mm

KKA3000+NH/2Pro

3.0mm

KKA4500+NH/2Pro

4.5mm

KKEI_02KKEI_01

KK_GK.H KK_GK.P

O-Ring Insertion Tool with ISO Connection

O-Ring Insertion Tool with Ratchet Connection

O-Ring Cap (open or closed)Closed-Hard

ABUTMENTS

KKA0500+NH/3Pro

0.5mm

KKA1500+NH/3Pro

1.5mm

KKA3000+NH/3Pro

3.0mm

KKA4500+NH/3Pro

4.5mm

O-Ring (color) 2-pieces Retention Pounds

KK_OR.EH/Set

Black Extra Hard - 4 lbs. Green-Hard - 3 lbs. Red-Soft - 2 lbs. Light Green-Labor - 1 lb.

KK_OR.H/Set KK_OR.W/Set KK_OR.L/Set

ORLK.01

O-Ring Lab Kit with Abutment Analog

O-Ring Cap Plastic Pink Closed

KK_GK.S

Closed-Soft

KK_OK.H

Open-Hard

KK_OK.S

Open-Soft

KKA0500+NH/3Pro_S

0.5mm

KKA1500+NH/3Pro_S

1.5mm

•Scan posts are used to digitally capture integrated implant positions

•To be used with all types of intraoral scanners

•Verify full placement with radiograph after torque

Scan Post

SCAN POST


Abutment Screw (not included)

Titanium Scan Post 2mm

Rapid Implant


15 Ncm(2mm platform peek or

titanium)

15 Ncm(3mm & short platform

peek or titanium)


CGSB_K3Pro/2_k

Titanium

CGSB_K3Pro/2.PK_k

PEEK

CGSB_K3Pro/3_k

Titanium

CGSB_K3Pro/3.PK_k

PEEK




ETS.K3Pro/3.Set

Scan Post for K3Pro Ti-Base3mm Platform

Scan Post for K3Pro Ti-Base2mm Platform

SCAN POST


INSTRUMENTS & TRAYS

In this section you will find the following Surgical Trays and Instruments:

Basic Rapid Surgery Tray•Complete Surgery Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57•Individual Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Basic Sure Surgery Tray•Complete Surgery Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58•Individual Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58-59

Expert Surgery Tray•Complete Surgery Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59•Individual Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59-60

Professional Surgery Tray•Complete Surgery Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61•Individual Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61-62

Drill Stop & Pilot Drill Surgery Tray•Complete Surgery Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63•Individual Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Prosthetic Surgery Tray•Complete Surgery Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64•Individual Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64-65

Precision Guided Surgery Tray•Complete Surgery Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66•Individual Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66-69

Bone Condensers, Insertion Handles, Broken AbutmentRemoval Tools, and Sulcus Reamers• Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Instruments & Trays


INSTRUMENTS & TRAYS

K3Pro Basic Tray Rapid

K3Pro Rapid/Precision Surgery Tray

K3Pro ProfessionalSurgery Tray

K3Pro Lab ProstheticInstrument Tray


BASIC RAPID SURGERY TRAY

Taps3.0mm GS3.03.5mm GS3.54.0mm GS4.04.5mm GS4.55.0mm GS5.06.0mm GS6.0 (shown)

SK01_K3Pro.KB

Sinkers

3.0mm K3.03.5mm K3.54.0mm K4.04.5mm K4.55.0mm K5.06.0mm K6.0 (shown)

Bur, Starter and Extension

Pilot Drill

2.0 x 18.0mm KB2.0/18.0S

Diameter x Length 3.0 x 18.0mm KKB3.0/18.0OS (shown)

3.5 x 18.0mm KKB3.5/18.0OS4.0 x 18.0mm KKB4.0/18.0OS4.5 x 18.0mm KKB4.5/18.0OS5.0 x 18.0mm KKB5.0/18.0OS6.0 x 12.0mm KKB6.0/12.0OS

Drills

ISO Adapter with Ratchet ConnectionRA_ISO.WSA

Ratchet Extension K3Pro 5mmRV_01.K

Abutment Removal tool for K3Pro 2mm well for RatchetAAA_K3Pro/2.1

Abutment Removal tool for K3Pro 3mm well for RatchetAAA_K3Pro/3

Hex Screwdriver for hand insertion - shortSKD02H

Hex Screwdriver with Contra Angle Connection - shortWSE_SK1.2k

Implant inserter for 3mm well for contra angle

WSEI_1.6

Implant inserter for 2mm well for contra angleWSEI_1.4

Tools

Argon K3 Pro®

Basic Rapid Surgery Tray

KBV03

KB1.9K

KB.STLD

Torque Ratchet

TR_10.45

Torque Ratchet


BASIC SURE SURGERY TRAY

Argon K3 Pro®

Basic Sure Surgery Tray

SK01_K3Pro.ZB

Taps

3.0mm GS3.03.5mm GS3.54.0mm GS4.04.5mm GS4.55.0mm GS5.06.0mm GS6.0 (shown)


Pilot Drill

2.0 x 18.0mm KB2.0/18.0S

Diameter x Length 3.0 x 18.0mm KZB3.0/18.0OS (shown)

3.5 x 18.0mm KZB3.5/18.0OS4.0 x 18.0mm KZB4.0/18.0OS4.5 x 18.0mm KZB4.5/18.0OS5.0 x 18.0mm KZB5.0/18.0OS6.0 x 12.0mm KZB6.0/12.0OS

Drills

Sinkers





Abutment Removal tool for K3Pro 3mm well for Ratchet

AAA_K3Pro/3



Tools

KBV03

KB1.9K

KB.STLD


EXPERT SURGERY TRAY

Argon K3 Pro®

Expert Surgery Tray

Pilot Drills

Pilot Subcrestal DrillsDiameter x Length2.5 x 8.5mm KB2.5/8.5S2.5 x 10.0mm KB2.5/10.0S2.5 x 12.0mm KB2.5/12.0S2.5 x 14.0mm KB2.5/14.0S (shown)2.5 x 18.0mm KB2.5/18.0S

Sure Cylindrical DrillsDiameter x Length3.0 x 18.0mm KZB3.0/18.0OS (shown)3.5 x 18.0mm KZB3.5/18.0OS4.0 x 18.0mm KZB4.0/18.0OS4.5 x 18.0mm KZB4.5/18.0OS5.0 x 18.0mm KZB5.0/18.0OS6.0 x 12.0mm KZB6.0/12.0OS

Rapid Conical DrillsDiameter x Length3.0 x 18.0mm KKB3.0/18.0OS (shown)3.5 x 18.0mm KKB3.5/18.0OS4.0 x 18.0mm KKB4.0/18.0OS4.5 x 18.0mm KKB4.5/18.0OS5.0 x 18.0mm KKB5.0/18.0OS6.0 x 12.0mm KKB6.0/12.0OS

Pilot Crestal DrillsDiameter x Length2.0 x 7.5mm KB2.0/7.5S2.0 x 9.0mm KB2.0/9.0S2.0 x 11.0mm KB2.0/11.0S2.0 x 13.0mm KB2.0/13.0S2.0 x 18.0mm KB2.0/18.0S (shown)

KBV03

SK02_K3Pro.DC

KB1.9K

KB.STLD

Bur

Implant Drills

Implant Drills

Taps


Tools

Torque Ratchet

TR_10.45

Torque Ratchet

Starter and Extension

Places both Rapid and Sure Implants


WSEI_1.6


WSEI_1.4


EXPERT SURGERY TRAY

Hex Screwdriver with Ratchet Connection - shortSKD01K

Tools



Drill Depth guage for K3ProBTS_K3Pro

K3Pro Gingival Height Measure InstrumentGS_3/2

Implant inserter for 3mm well with Ratchet Connection - longRAEI.L_1.6


Hand Knob Adaptor with Square ConnectionRK01_VK4

K3Pro Parallel Pins0º PP_00 (shown)10º PP_1015º PP_1520º PP_20

Torque Ratchet

TR_10.45

ABPI01Abutment Preparation Instrument & Gauge Holder




AAA_K3Pro/2.1




Tools

Gauge/Abutment Tool & Torque Ratchet

Sinkers


Hex Screwdriver with Contra Angle Connection - longWSE_SK1.2L


PROFESSIONAL SURGERY TRAY




Tools

Sure Cylindrical DrillsDiameter x Length3.0 x 18.0mm KZB3.0/18.0OS (shown)3.5 x 18.0mm KZB3.5/18.0OS4.0 x 18.0mm KZB4.0/18.0OS4.5 x 18.0mm KZB4.5/18.0OS5.0 x 18.0mm KZB5.0/18.0OS6.0 x 12.0mm KZB6.0/12.0OS

Implant Drills

Rapid Conical DrillsDiameter x Length3.0 x 18.0mm KKB3.0/18.0OS (shown)3.5 x 18.0mm KKB3.5/18.0OS4.0 x 18.0mm KKB4.0/18.0OS4.5 x 18.0mm KKB4.5/18.0OS5.0 x 18.0mm KKB5.0/18.0OS6.0 x 12.0mm KKB6.0/12.0OS

Taps


Sinkers






KB1.9K

KB.STLD

KBV03

Pilot Drills



Implant DrillsArgon K3 Pro®

Professional Surgery Tray

SK03_K3Pro.DC



PROFESSIONAL SURGERY TRAY

Tools

4.0 mm

3.0 mm

3.5 mm

4.5 mm

5.0 mm

6.0 mm


K3Pro Parallel Pins0º PP_00 (shown)10º PP_1015º PP_1520º PP_20

Torque Ratchet TR_10.45

Drill Sleeves

Diameter x Length4.0mm x 6.5 BH40654.0mm x 8.5 BH40854.0mm x 10.0 BH40104.0mm x 12.0 BH4012 (shown)4.0mm x 14.0 BH40144.0mm x 16.0 BH4016


Diameter x Length 5.0mm x 6.5 BH50655.0mm x 8.5 BH50855.0mm x 10.0 BH50105.0mm x 12.0 BH5012 (shown)5.0mm x 14.0 BH5014

Diameter x Length 6.0mm x 6.5 BH6065 (shown)6.0mm x 8.5 BH60856.0mm x 10.0 BH6010



ABPI01

Abutment Preparation Instrument & Gauge Holder


WSEI_1.6




K3Pro Gingival Height Measure Instrument

GS_3/2

Drill Depth guage for K3Pro

BTS_K3Pro

Gauge/Abutment Tool & Torque Ratchet

Hex Screwdriver with Ratchet Connection - shortSKD01k



DRILL STOP & PILOT DRILL TRAY

4.0 mm

Diameter x Length4.0mm x 6.5 BH40654.0mm x 8.5 BH40854.0mm x 10.0 BH40104.0mm x 12.0 BH4012 (shown)4.0mm x 14.0 BH4014

4.5 mm


5.0 mm

Diameter x Length 5.0mm x 6.5 BH50655.0mm x 8.5 BH50855.0mm x 10.0 BH50105.0mm x 12.0 BH5012 (shown)5.0mm x 14.0 BH5014

6.0 mm

Diameter x Length 6.0mm x 6.5 BH6065 (shown)6.0mm x 8.5 BH60856.0mm x 10.0 BH6010

Pilot Drills



Argon K3 Pro®

Drill Stop & Pilot Drill Tray

BS.PB_K3Pro

3.0 mm


3.5 mm


Drill Sleeves


PROSTHETIC INSTRUMENTATION TRAY

Argon K3 Pro® Lab Prosthetic Instrumentation Trays

PK01_K3Pro

Tools - Screw Drivers

Hex Screwdriver for hand insertion - longSKD01H

Hex Screwdriver with Contra Angle Connection - long

WSE_SK1.2L

Hex Screwdriver with Ratchet Connection - shortSKD01K



Hex Screwdriver with Ratchet Connection - longSKD01L

Tools - Abutment Removal Keys


AAA_K3Pro/2.1


AAA_K3Pro/3

ISO Adapter with Ratchet Connection

RA_ISO.WSA

Finder Contra-angle Inserter longFLWE_L

Finder Contra-angle Inserter short

FLWE_k

RapidFix Insertion Instrument Contra Angle connection

VBA_EI2_3

Tools - Extension, ISO, Gingiva

Ratchet Extension for 5mm

RV_01.K

O-Ring Insertion tool with ratchet connection

KKEI_02

O-Ring Insertion tool with ISO connection

KKEI_01

Abutment Removal tool for K3Pro Short Platform for Ratchet

AAA_K3Pro/Short

K3Pro Gingival Height Measure InstrumentGS_3/2

KBV03K3Pro Drill Extension

Tools - Finder/Locator

Tools - O-Ring

Tools - RapidFix




PROSTHETIC INSTRUMENTATION TRAY

RapidFix Abutment/Implant Positioning Guide for 2mm well

VBA_RH.2

RapidFix Abutment/Implant Positioning Guide for 3mm well

VBA_RH.3

Multi-Base Insertion SleeveMB.LAH

K3Pro Sulcus Reamer for 2mm well Contra Angle3.5mm SF.WSA_3.5/24.5mm SF.WSA_4.5/2 (shown)5.0mm SF.WSA_5.0/2

K3Pro Sulcus Reamer for 3mm well Contra Angle5.5mm SF.WSA_5.5/3 (shown)6.0mm SF.WSA_6.0/36.5mm SF.WSA_6.5/3

OsteoScrew Insertion Handle - Silicon

OSG_001

Tools - RapidFix

RapidFix Instrument for Hand/Ratchet InsertionVBA_HREI2_3

Tools - Multi-Base

Abutment Removal tool for MB & VBA Sleeves with 2mm Post

AAA_MB.VBA_K3Pro/2

Abutment Removal tool for MB & VBA Sleeves with 3mm Post

AAA_MB.VBA_K3Pro/3

Tools - Sulcus Former

ABPI01

Abutment Preparation Instrument & Gauge Holder

Tools

Torque RatchetTR_10.45

Finder Core InstrumentFLCI_01

RS_LACounter Tool


PRECISION GUIDED SURGERY

3.5mm Cortical DrillsDiameter x Length3.5mm x 3mm RS_KB3.5/3 (shown)3.5mm x 5mm RS_KB3.5/53.5mm x 7mm RS_KB3.5/7

3.5mm Final DrillsDiameter x Length3.5mm x 12.0mm RS_B3.5/12.0 (shown)3.5mm x 14.0mm RS_B3.5/14.03.5mm x 16.0mm RS_B3.5/16.03.5mm x 18.0mm RS_B3.5/18.03.5mm x 20.0mm RS_B3.5/20.03.5mm x 22.0mm RS_B3.5/22.03.5mm x 24.0mm RS_B3.5/24.03.5mm x 26.0mm RS_B3.5/26.03.5mm x 28.0mm RS_B3.5/28.0

3.0mm Tap

RS_GS3.0

RS_GS3.5

3.0 - 3.5mm Inserter Contra AngleDiameter x Length

3.0 - 3.5mm x 3mm RSIE_WS3.0-3.5/3 (shown)3.0 - 3.5mm x 5mm RSIE_WS3.0-3.5/53.0 - 3.5mm x 7mm RSIE_WS3.0-3.5/7



3.0 - 3.5mm Pilot DrillsDiameter x Length

3.0-3.5mm x 12.0mm RS_PB3.0-3.5/12 (shown)3.0-3.5mm x 14.0mm RS_PB3.0-3.5/143.0-3.5mm x 16.0mm RS_PB3.0-3.5/16

SK06_K3Pro

3.0 - 3.5mm

3.0 - 3.5mm Punch

3.0 - 3.5mm x 3.0-7.0mm GS_RS3.0-3.5

3.0 - 3.5mm Trepan

3.0 - 3.5mm x 3.0-7.0mm TF_RS3.0-3.5

Argon K3 Pro®

Precision Guided Surgery

Places Rapid Implants

3.5mm Tap



RS_GS4.0

RS_GS4.5

4.0 - 4.5mm Inserter Contra AngleDiameter x Length4.0 - 4.5mm x 3mm RSIE_WS4.0-4.5/3 (shown)4.0 - 4.5mm x 5mm RSIE_WS4.0-4.5/54.0 - 4.5mm x 7mm RSIE_WS4.0-4.5/7

4.0 - 4.5mm Hand RatchetDiameter x Length4.0 - 4.5mm x 3mm RSIE_RA4.0-4.5/3 (shown)4.0 - 4.5mm x 5mm RSIE_RA4.0-4.5/54.0 - 4.5mm x 7mm RSIE_RA4.0-4.5/7

4.0 - 4.5mm Drill Reduction & Adaptor

1mm for 4.0 & 4.5mm RS_BRR-1.40-45

4.0 & 4.5 to 3.0 & 3.5 RS_ARH.40-45_30-35



4.0 - 4.5mm Punch


4.0 - 4.5mm x 3.0-7.0mm GS_RS4.0-4.5

4.0 - 4.5mm Trepan

4.0 - 4.5mm x 3.0-7.0mm TF_RS4.0-4.5


4.0mm Cortical DrillsDiameter x Length4.0mm x 3.0mm RS_KB4.0/3 (shown)4.0mm x 5.0mm RS_KB4.0/54.0mm x 7.0mm RS_KB4.0/7


3.0 - 3.5mm Hand RatchetDiameter x Length3.0 - 3.5mm x 3mm RSIE_RA3.0-3.5/3 (shown)3.0 - 3.5mm x 5mm RSIE_RA3.0-3.5/53.0 - 3.5mm x 7mm RSIE_RA3.0-3.5/7

4.0 - 4.5mm

4.0mm Tap

4.5mm Tap



Inserters - Short Platform

Inserters Contra Angle - ShortDiameter x Length4.0-4.5mm x 2.5mm RSIE_WS4.0-4.5/2.5_S (shown)

4.0-4.5mm x 4.5mm RSIE_WS4.0-4.5/4.5_S4.0-4.5mm x 6.5mm RSIE_WS4.0-4.5/6.5_S5.0-6.0mm x 2.5mm RSIE_WS5.0-6.0/2.5_S5.0-6.0mm x 4.5mm RSIE_WS5.0-6.0/4.5_S5.0-6.0mm x 6.5mm RSIE_WS5.0-6.0/6.5_S

Inserters Hand/Ratchet - ShortDiameter x Length4.0-4.5mm x 2.5mm RSIE_RA4.0-4.5/2.5_S (shown)

4.0-4.5mm x 4.5mm RSIE_RA4.0-4.5/4.5_S4.0-4.5mm x 6.5mm RSIE_RA4.0-4.5/6.5_S5.0-6.0mm x 2.5mm RSIE_RA5.0-6.0/2.5_S5.0-6.0mm x 4.5mm RSIE_RA5.0-6.0/4.5_S5.0-6.0mm x 6.5mm RSIE_RA5.0-6.0/6.5_S

5.0 - 6.0mm Drill Reduction & Adaptor

1mm for 5.0 & 6.0mm RS_BRR-1.50-60

5.0 & 6.0 to 4.0 & 4.5 RS_ARH.50-60_40-45

5.0 - 6.0mm Hand RatchetDiameter x Length5.0 x 6.0mm x 3mm RSIE_RA5.0-6.0/3 (shown)5.0 x 6.0mm x 5mm RSIE_RA5.0-6.0/55.0 x 6.0mm x 7mm RSIE_RA5.0-6.0/7

5.0 - 6.0mm Inserter Contra AngleDiameter x Length5.0 - 6.0mm x 3mm RSIE_WS5.0-6.0/3 (shown)5.0 - 6.0mm x 5mm RSIE_WS5.0-6.0/55.0 - 6.0mm x 7mm RSIE_WS5.0-6.0/7

RS_GS6.0

5.0 - 6.0mm

5.0mm Final DrillsDiameter x Length5.0mm x 12.0mm RS_B5.0/12.0 (shown)5.0mm x 14.0mm RS_B5.0/14.05.0mm x 16.0mm RS_B5.0/16.05.0mm x 18.0mm RS_B5.0/18.05.0mm x 20.0mm RS_B5.0/20.05.0mm x 22.0mm RS_B5.0/22.05.0mm x 24.0mm RS_B5.0/24.0


6.0mm Final DrillsDiameter x Length

6.0mm x 12.0mm RS_B6.0/12.0 (shown)6.0mm x 14.0mm RS_B6.0/14.06.0mm x 16.0mm RS_B6.0/16.06.0mm x 18.0mm RS_B6.0/18.06.0mm x 20.0mm RS_B6.0/20.0

5.0mm Tap

RS_GS5.0

5.0mm Cortical DrillsDiameter x Length

3.0mm x 5.0mm RS_KB5.0/3 (shown)5.0mm x 5.0mm RS_KB5.0/57.0mm x 5.0mm RS_KB5.0/7

5.0 - 6.0mm Punch


5.0 - 6.0mm x 3.0-7.0mm GS_RS5.0-6.0

5.0 - 6.0mm Trepan

5.0 - 6.0mm x 3.0-7.0mm TF_RS5.0-6.0


6.0mm Tap



Ratchet Extension K3Pro 5mm

Hex Screwdriver for hand insertion - extra short

SKD03H

Torque Ratchet

RS_LA

Counter Tool

TR_10.45

Optional Accessories


Hex Screwdriver for hand insertion - longSKD01H

Ratchet Extension K3Pro 10mm

RV_01.L

ISO Adapter with Ratchet Connection

RA_ISO.WSA

Hex Screwdriver with Contra Angle Connection - short

WSE_SK1.2k


K3Pro Drill ExtensionKBV03

Tools

AdaptorRK01_VK4 RV_01.K


INSTRUMENTS & TRAYS

K3Pro Bone Condensers

For Implants 2.1 thru 6.0For 2.1 implants KK_2.1For 2.4 implants KK_2.4For 3.0 implants KK_2.7For 3.5 implants KK_2.9 (shown)For 4.0 implants KK_3.5For 4.5 implants KK_3.8For 5.0 implants KK_4.3For 6.0 implants KK_5.3

Insertion Handles

OsteoScrew Insertion HandlesTitanium (silver) OS_EG.01Titanium (gold) OS_EG.01tiSilicon OSG_001 (shown)

Sulcus Reamers2mm (red) Platform

K3Pro Sulcus Reamer for 2mm WellHand5.0mm SF.HA_5.0/2

Sulcus Reamers3mm (yellow) Platform

K3Pro Sulcus Reamer for 2mm WellContra Angle3.5mm SF.WSA_3.5/2

K3Pro Sulcus Reamer for 3mm Well

Hand5.5mm SF.HA_5.5/3


Broken Abutment Removal Tool

Abut Removal ToolART_Pro2

K3Pro Rescue Drill for Screw1.38mm for 2mm RSB_138/K3Pro2 (shown)1.60mm for 3mm RSB_160/K3Pro3

Centering Sleeve for Screw Removal2mm SEI.ZH_Pro2 (shown)3mm SEI.ZH_Pro3 Contra Angle

5.5mm SF.WSA_5.5/3.1




Contra Angle6.0mm SF.WSA_6.0/3.1


Contra Angle6.5mm SF.WSA_6.5/3.1


SURGICAL MOTORS

Bien-Air IChiropro Plus with 16GB iPad® with Wi-Fi (Micro Series CA 20:1L Handpiece)

Aseptico Motor with Mont Blanc (AEU-6000-70V) Handpiece (AHP-85MB-X)

1700440-00IE

AEU-SILV Surgical Motors

& Easy Bar Kit


EASY BAR KIT

Includes:• 245 bars made of steel• Available in different sizes

according to the center- to-center distance

• Tweezers

• Caliper

Easy Bar Kit

Contact Information

Argon Dental USA1000 Corporate DrivePO Box 770Marshfield, WI 54449Phone: 1-844-484-4998

www.argondentalusa.comwww.facebook.com/argondentalusa

Joel A. GonzalesDirector of Sales and Service USA

480.440.3927 | [email protected]

:063 $0.1-&5& *.1-/5 40-65*0/ - implant know-how llc• 17 centers • 3,538 implants •...

Documents

:063 $0.1-&5& .1-/5 40-650/ - implant know-how llc• 17 centers • 3,538 implants •...