060626 huawei umts end-to-end solution

6
Huawei UMTS End-to-End Solution Version No.: M3-030030-20060607-C-1.0

Upload: tharindu-wijegoonasekara

Post on 23-Nov-2015

69 views

Category:

Documents


1 download

TRANSCRIPT

  • Huawei UMTS End-to-End Solution

    Version No.: M3-030030-20060607-C-1.0

  • Huawei UMTS End-to-End Solution

    New Generation Node BCreating Value for CustomersMobile communication is moving from simple voice and SMS to multimedia. UMTS

    can bring more attractive applications and better experience to subscribers, and

    provide a higher efficient network and faster roll-out capability of new services to

    operators.

    Huawei is dedicated to persistently bringing innovation and value to mobile commu-

    nications world, and helps operators to deploy an easy-to-operate, TCO saving and

    future-oriented UMTS system.

    Easy-to-Operate As a complete end-to-end UMTS solution provider, Huawei can provide easy opera-

    tion with operation and maintenance subsystems and toolkits for operators during a

    network life-cycle, including precise radio network prediction, network planning,

    daily maintenance, customer complain handling, network optimization and evolu-

    tion.

    TCO SavingWith Huawei innovative solutions, such as New Generation Node B, Distributed

    Node B Solution, Hybrid IP Transmission etc., operators can not only achieve the

    initial phase investment saving and a faster network deployment capability, but also,

    and more important, get a long-term OPEX saving, which is a big concern for

    operators especially in 3G era.

    Future-oriented Huawei is always considering saving future investment for operators and providing

    future-oriented networks as well. Huawei's unified core network, operating system

    and service platform, can all smoothly evolve to supporting 3GPP R6-based network.

    Huawei provides operators a full performance HSDPA solution (14.4 Mbps/cell) from

    day one to prompt service growth.

    Features of New Generation Node B

    Integrated digital power amplifier greatly reduces the power consumption of Node B

    Multi-carrier TRX allows smooth network evolution

    Full-performance HSDPA provides high quality mobile broadband service for users

    Open Architecture enables quick, cost-effective network construction

    Conventional Node B New Generation Node B

    Standalone Analog Linear PA

    Single-carrier TRX

    Limited HSDPA Performance

    Integrated Digital PA

    Multi-carrier TRX

    Full HSDPA Performance

    Leading New Generation Node B family, designed for your sites

    Urban, Indoor

    BTS3812EMacro Indoor Node B

    BBU3806/BBU3806C + RRU3801CDistributed Node B

    Base Band Processing Unit Remote Radio Unit

    Urban, Difficult Site Acquisition

    BTS3801C/BTS3803CMini Node B

    Low Traffic AreasBlind Spots or Hot Spots

    BTS3801B Pico Node B

    Public Hot Spots, Indoor

    Urban, Outdoor

    BTS3812AMacro Outdoor Node B

    Private Interface Open Architecture

    Figure 1 Huawei New Generation Node B family

    Figure 2 Comparison of conventional Node B and New Generation Node B

  • Huawei UMTS End-to-End Solution

    HSDPA and Hybrid IP Transmission

    Distributed Node B Solution

    Adopting remote RF technology, Huawei Distributed Node B consists of RRU (Remote Radio Unit) and BBU (Base Band Unit). RRU can be installed close to the antenna, and connected with the Host Node B or BBU via optical fiber.

    Up to 30% Savings in TCO

    Sites resource saving and easy site acquisition

    BBU can be embedded in indoor and outdoor equipment due to its small size, 19' width x 1U height

    RRU is easy to install due to its light weight, only 20 kg

    Fast deployment and civil work saving

    Distributed Node B can be used as macro Node B, RRU output power is 20 W

    Reducing power consumption

    Principle of Huawei Distributed Node B

    RRU on the Mast RRU on the Wall BBU in GSM BTS Cabinet

    Distributed Node B is a preferred choice for 3G operators to construct a cost-effective network

    BBU or Host Node BI/Q digital signal

    RRU

    Optical fiber

    CPRIBase band

    processing unit RF unit

    TRX

    Hybrid IP Transmission, Reducing Transmission Cost

    With the deployment of HSDPA, much more transmission bandwidth is required. In order to meet the customers' requirements to reduce the cost of transmission with the same quality, Huawei provides a Hybrid IP transmission solution with the principle that voice and other services demanding conversational QoS are carried on high QoS network (eg. E1) and Best Effort packet data services are carried on low QoS network (eg. ADSL). It is also a stepping stone to All IP RAN solution.

    Huawei HSDPA SoC ASIC

    Peak rate up to 14.4 Mbps (DL), 384 kbps (UL)

    Dynamic 15 codes/cell allocation

    Support a wide variety of data rate, 12 categories of UE

    Support 64 HSDPA users in one cell simultaneously

    Large capacity RNC (960 Mbps data throughput) and SGSN (10 Gbps throughput) to meet HSDPA requirement

    BBU in Auxiliary Facilities Box

    Outstanding Advantages of Huawei HSDPA Solution

    Figure 3 Basic principle of Distributed Node B

    Figure 4 The installation scenarios of Huawei distributed Node B

    Node B

    For CS Services and High QoS PS services

    For best effort PS servicesRNC

    High QoS Network

    Low QoS Network

    Figure 5 Huawei hybrid IP transmission solution

  • Huawei UMTS End-to-End Solution

    GPRS/UMTS Unified PS Core Solution

    With more than 100 commercially deployed Mobile Softswitch networks, Huawei has been one of the leading suppliers in the mobile softswitch market. Huawei Mobile Softswitch solution is a 2G/3G unified solution with layered architecture, open interfaces and industry-leading performance.

    Maturity Proven by Large Scale Commercial DeploymentMore than 100 mobile softswtich networks deployed worldwide in more than 60 countries

    More than 100 million mobile subscribers served in terms of 2G and 3G VMSC

    More than 250,000 E1 ports deployed in Transit MSC and Gateway MSC level

    2G/3G Unified Solution to Protect Long-term InvestmentHigh performance with the leading carrier-grade hardware platform

    Smooth evolution from 2G VMSC to 2G/3G combined mode

    Smooth evolution to IMS-based All IP future network

    Smooth migration from TDM transmission to IP backbone

    Savings in CAPEX and OPEX Reducing transmission expenditure by introducing IP transport and CRTP compression

    Centralized network management to reduce OPEX

    Faster new services to market and enhanced 3G multimedia applications

    Saving transmission cost and TC resource with TrFO

    Innovative Solution to Improve Network ReliabilityDual Homing and Mini-Flex solution for network redundancy

    Network grade call access control solution to enhance the network resilience

    Simultaneous TDM and IP trunks for smooth network transformation

    Large capacity and high processing capabil ity to meet the requirements of HSDPA, HSUPA, IMS, MBMS, etc.

    SGSN supports 2 million subscribers, 10 Gbps data throughput

    GGSN supports 1 million subscribers PDP contexts, 3 Gbps data throughput

    GPRS/UMTS unified PS core network

    SGSN supports Iu interface and Gb interface simultaneously

    Resources of GPRS and UMTS can be allocated dynamically to save CAPEX

    Easy maintainance of the integrated PS core network to save OPEX

    All IP solution

    SGSN supports Iu over IP, Gb over IP, SS7 over IP

    SGSN supports Ipv4 and IPv6 of both user plane and transport plane

    Intelligent charging solution

    GGSN supports content-based charging function

    GGSN supports both online charging and offline charging

    Decrease inter-SGSN signaling procedure, improve user experience

    GSM/GPRS

    BSC

    BTS

    Gb

    Iub

    Node B

    UMTSUTRAN

    RNC

    Iu-ps

    Gr

    HLR

    Gn

    Ga

    2G/3G GGSNGi

    BG

    Gp

    MMSCRADIUS

    ServicesAS

    DNS

    Firewall

    2G/3G SGSN

    2G/3G CG

    Inter PLMN

    Ga

    Mobile Softswitch Solution

    Figure 6 GPRS/UMTS unified PS core network

  • Huawei UMTS End-to-End Solution

    Comprehensive analysis of performance/configuration/alarm/engineering

    Integrates several types of optimization/planning auxiliary tools

    GENEX ProbeAGILENT QUALCOMM

    Several types of test data

    GENEX Nastar

    GENEX Assistant

    GENEX Probe

    GENEX U-Net

    PSTNPLMNISDN

    Sharing of analysis results

    Obtain test data

    Parameter optimization file

    RNC test data

    RNC

    RNS

    CN

    Imanager M2000TM

    RNC

    RNS

    Radio test data

    Network GENEX network optimization toolkit

    Node B

    Node BNode B

    HLR/AC

    MSC/SSP/VLR

    GMSC/SSP

    Node BNode B

    Node B

    Network Planning and Optimization

    IMS Solution

    Network Planning and Optimization Toolkit - GENEX Kit

    Resources, Capabilities and Collaboration of Network Planning

    Integrated research findings on Radio Network Planning into ASIC design

    Collaborates with prestigious consulting firms in the field of radio planning & optimization services delivery

    Extensive experiences gained from the planning, deploying and optimizing of GSM/CDMA/UMTS networks for leading operators, serving 140 million subscribers globally

    Multiple AccessHuawei IMS supports fixed and mobile access simultaneously, including GPRS/UMTS /WiFi/WiMAX/xDSL/LAN. Huawei IMS enables operators to implement a FMC network.

    Smooth Upgrade from 3GPP R4All nodes of Huawei IMS solution share the same hardware and software architec-tures with Huawei MSC Server/MGW. The perfect backward compatibility will protect carriers' investment on a R4-based network.

    Carrier-grade, Large-capacity and Linear-scalabilityAll Huawei IMS nodes are based on the proven platform and integrated with a

    flexible O&M. On the other hand, both Large-capacity and Linear-scalability capabilities of Huawei IMS solution enable carriers reach a trade-off between the present small-size network and a large-size one in the future.

    Enriched ServicesHuawei IMS provides rich voices, video sharing, multimedia caller-line-identity, multimedia ring-back-tone, push-to-talk over cellular, IP Centrex, multimedia conferencing, presence, messaging, group, etc.

    Comprehensive SCEHuawei IMS provides ENIP to implement a SCE (Service Creation Environment) which provides the API for new services and abundant developing tools. It will help carriers develop new services of their own and speed up the introduction of new services.

    UMTS/GPRS

    BSS GSN

    WLANAC

    LAN/xDSLBRAS

    PSTN/PLMN

    GTAS9900

    MM-Meting

    MM-PTX

    MM-RichCa

    Infox-Sreamin

    Infox-DS

    TELLIN MM-OSG

    OSGSCPDown LoadStrermingPichCallPoCConferenceTelephony

    MM-Msging

    MM-PS MM-XDMS

    MM-CMS

    SOFTX3000

    OCS IM_SSFGroupPresenceMessaging OCS IM_SSFGroupPresenceMessaging

    OSGSCPDown LoadStrermingPichCallPoCConferenceTelephony

    RM9000IMS Core

    MSoft x3000 CSC3300 HSS9820

    UMG8900

    MRS6200

    Legend

    SIP/Diameter

    Pre-IMS

    TDM

    3G Network Planning Software GENEX U-NetSupports network dimensioning, coverage prediction, system simulation, propagation modelcalibration, RF parameter tuning and automatic site selection for the planning and optimization of UMTS/ HSDPA/CDMA/EVDO /GSM/GPRS networks.

    Air Interface Test Tool GENEX ProbeA drive-test system designed for network performance testing, and instrumental to troubleshooting, verification, maintenance and optimization of UMTS/HSDPA/GSM networks.

    Air Interface Test UE GENEX U626A test mobile which can be used not only as a test terminal driven by the Probe software running a separate computer, but also as an standalone test terminal when working in test mode. It supports GSM/GPRS/UMTS networks.

    Wireless Performance Post-Analysis Software GENEX AssistantProvides comprehensive and synchronized analysis of UMTS/GSM drive test and RNC data.

    Network Performance Analysis Software GENEX NastarProvides many features including comprehensive analysis of call statistics, call trace log, and configuration data; trouble isolating and shooting; real-time network monitoring; and operational trend analysis.

    Figure 7 Huawei IMS solution

    Figure 8 Network planning and optimization toolkit GENEX Kit

  • Huawei UMTS End-to-End Solution

    Convergent & Layered Application Service Architecture

    U526video phone

    video streaming

    0.3 mega pixels double-cameras

    WAP 2.0

    MP3/MP4

    U636260,000 color, 2.2 inch QVGA internal screen, 1.2 inch external screen

    1.30 mega pixel, 180 rotary camera

    video phone and streaming

    MP3/MP4

    camera shot, picture recording, voice recording

    Java, WAP, E-mail

    22 million user memory, SD/MMC spread sheet

    E620 HSDPA data card 1.8 Mbps HSDPA Downlink

    384 Kbps Uplink

    EDGE

    900/1800/1900 MHz GSM/GPRS

    Data & voice concurrent service

    E612 UMTS data card Uplink and Downlink 384 kbps

    900/1800/1900 MHz GSM/GPRS

    data & voice concurrent service

    Open and standard, modular-design, future-orientedUnified and convergent solution

    Unified profile management, unified charging, unified authentication, unified OMC and analysis...Convergence: 2G/2.5G/3G; voice and data.

    Good compatibility and interoperability with core networkRapid service creation and deployment

    Provide abundant and flexible verification tools

    Provide workflow-based, complete service lifecycle management

    UMTS Terminals

    Figure 8 Huawei SDP architecture

    1 2 3 4 5 6