01 contents fa - automex€¦ · show | 24th international machine tools and metalworking...

www.metaltech.com.my | www.automex.com.my

SHOW PREVIEW

24TH INTERNATIONAL MACHINE TOOLS ANDMETALWORKING TECHNOLOGY EXHIBITION

Co-locating:

PUTRA WORLD TRADE CENTRE (PWTC)KUALA LUMPUR, MALAYSIA

23-26 MAY 2018 Wednesday - Friday23 - 25 May 201810:00 - 18:00

Saturday26 May 201810:00 - 17:00

Opening Hours

your visit now onwww.metaltech.com.my

Pre-registeryour visit now on

Pre-register

Organised by:

PlatinumSponsor:

GoldSponsor:

DiamondSponsor:

Supported by:

Of�cialMedia Partner:

Industry Seminar Main Sponsors:

Air CompressorSponsor:

Onsite VisitorRegistration Sponsor:

Of�cial Hotel:Lanyard Sponsors:Seminar Tea BreakSponsors:

BadgeSponsor:

Endorsed by:

METALTECH & AUTOMEX 2018 // 01

Visitors and Exhibitors who are driving to visit the exhibition, please refer to the map below for additional car parking options.

COMPLIMENTARY shuttle service will be provided between PWTC and the 2 parking locations listed on the map.

PARKING &SCHEDULE

Note: As car parks can get full during peak travel times, we advise you to arrive as early as possible to guarantee your parking spot.

PARKING LOCATIONMatrade Exhibition & Convention Centre (MECC)Coordination: 3.177379, 101.666926

Open Space Carpark (Behind Sime Darby Holding Sdn Bhd)Coordination: 3.162288, 101.694497

FREE SHUTTLESERVICES

Shuttle Transfer PWTCTime: 08:00 - 19:00 (23-25 May 2018) 08:00 - 18:30 (26 May 2018)

Pick Up/Drop Off PointPWTC • Hall 1 (Dewan Tun Razak 1) • Level 2 (Main Building)Sunway Putra HotelMatrade Exhibition & Convention Centre (MECC)Open Space Carpark (Behind Sime Darby Holding Sdn Bhd)

Route from:

MECC � Hall 1 � Level 2 � MECCSime Darby � Hall 1 � Level 2 � Sime Darby

1SCHEDULE

Route from:

MECC � Hall 1 � MECCSime Darby � Hall 1 � Sime Darby

2SCHEDULE

12:0011:4011:20 12:2011:0010:40

13:2013:00 13:40

15:4015:20 16:00

14:4014:2014:00

17:0016:4016:20

17:40

Route from:

Sunway Putra Hotel � Hall 1 � Level 2 � Sunway Putra Hotel

3SCHEDULE

9:409:209:008:408:20

12:4012:2012:00 13:0011:40

11:0010:4010:2010:009:409:20

14:00

13:20

14:20

16:20

15:40

16:40

15:2015:0014:40

17:4017:2017:00 18:00

10:00

18:4018:20

10:20

12:40

15:00

17:20

8:00

11:20

9:00

13:40

16:00

18:00 19:00

*sub

ject

to

traf

fic c

ond

ition

s

Morning Session: 08:00 - 10:00 Evening Session: 18:00 - 19:00

SHUTTLE SCHEDULE

This route will runs every 15-20 minutes* for two sessions.

This route will runs every 15-20 minutes* from 10:20 - 17:40

This route will runs every 15-20 minutes* from 09:00 - 18:00

Remarks:The operating hours of the shuttle services from Sunway Putra Hotel to MECC/Sime Darby will be EXTENDED from 19:00 to 22:00 on 24 May (Thursday) during the METALTECH Exhibitor Night.

PWTC

Open Space Carpark(Behind Sime Darby Holding Sdn Bhd)

Vistana Titiwangsa KL

Seri PacificHotel KL

KompleksKerajaan

Masjid WilayahPersekutuan

MECC

Titiwangsa

Taman TasikTitiwangsa

Sunway PutraHotel KL

Jala

n Tu

anku

Abd

ul R

ahm

an

Jala

n Pa

hang

Jalan Tun Razak

Jalan Raja Muda Abdul AzizJalan Sultan Azlan Shah

Jalan Kuching

Jalan Putra

Jala

n D

uta

Jalan Tun Razak

Jalan Khidmat Usaha SunwayPutra Mall

20 mins3.7 km

15 mins1.3 km

GET RM8 OFF 2 RIDES*to/from Putra World Trade Centrefrom 23 - 26 May 2018!

Promo Code

METALTECH

*Terms & Conditions:• Valid for all Grab services• Valid for GrabPay (Debit and Credit card) payment only• Valid for the �rst 1,000 rides daily

02 // METALTECH & AUTOMEX 2018 METALTECH & AUTOMEX 2018 // 03

IMPORTANT

The exhibition is open to trade, professional and business visitors by invitation and business card registration only.

For safety reasons, children below the age of 16 will not be allowed to enter the exhibition halls at any time.

All visitors must be suitably attired. Those in shorts, singlet and slippers will not be allowed into the exhibition halls.

The organiser reserves the right to refuse admission to any portion or remove any person from the exhibition halls without giving any reasons.

Go to www.metaltech.com.my to pre-register your visit today and avoid long queues upon arrival.

PRE-REGISTERNOW!

Go to http://www.metaltech.com.my and click on visitor E-ticket.

Fill in the details and click submit.

http://www.email.com.my

Confirmation Email

(Registration Number: MTM-12345)

STEP02

STEP03

http://www.metaltech.com.my/en-GB/visitors/e-ticket.aspx

The 24th International Machine Tools And Metalworking Technology Exhibition

23 - 26 May 2018 • Putra World Trade Centre (PWTC) • Kuala Lumpur Malaysia

Visitor Registration

Details and Information

Submit

You will receive a con�rmation email with a registration number. Present the con�rmation email to the E-Registration Counter at Level 2 or at Hall 1, Putra World Trade Centre in order to collect your badge.

The LRT station is located just opposite PWTC. Interchanging between rails is at the KL Sentral / Masjid Jamek station.

MY RAPID RAIL(Monorail Line / LRT Sri Petaling / Ampang Line & Kelana Jaya Line)T: 603 7885 2585

KTM COMMUTERT: 603 2267 1200

Buses in the city are readily available. One can stop at the PWTC bus stand located on Level 2 or the other alternative is to stop at Sunway Putra Mall (Shopping Arcade) located opposite PWTC.

RAPID KLT: 603 7885 2585

LEN SENGT: 603 4023 4452

PUBLIC CABT: 603 6259 2020

SAUJANAT: 603 2162 8888

KLIA AIRPORT LIMOT: 603 9081 4040

RADIO TAXIT: 603 9221 7600

SUNLIGHTT: 603 9200 1166

ZALNAS CABT: 603 2692 6000

HOW TO GET TO THE VENUE?

TRANSPORTATION

BY TRAINTRANSPORTATION

BY BUSTRANSPORTATION

BY TAXISTEP http://www.metaltech.com.my

The 24th International Machine Tools And Metalworking Technology Exhibition

23 - 26 May 2018 • Putra World Trade Centre (PWTC) • Kuala Lumpur Malaysia

Visitor RegistrationOpens for

Metaltech 2018

01

INDUSTRIALSEMINARINDUSTRYSEMINAR

DAY 123 May 2018

WednesdayPWTC, Level 2,

Bilik Johor/ Kedah

schedulemeetings

Register and your will receive an invitation email with a personalised link before the event.

Schedule your time and send out requests to people you would like to meet with. Always include a personal note when sending out the meeting request. You will receive regular email updates regarding your meeting requests and this can be saved on your email calendar.

create youraccount

completeyour profile

After choosing your preferred language, you may choose the quality of people you want to meet and load the list. Participants’ list will rank based on your preferences and you can update your pro�le now.

You are all set! Get �nal meeting schedule via email and you will receive free SMS reminders before a new meeting is due.

4 Simple StepsTo Register

The business matchmaking programme is aimed at assisting all buyers and suppliers to make critical connections and conduct necessary meetings during or after the event.

To participate in this special new matchmaking feature, please send your list of overseas buyers, brands or delegates that you are keen to make contact with [email protected].

WHAT IS BUSINESS MATCHMAKING PROGRAMME?

of meetings across four day event

100’s

Business MatchmakingProgramme 2017 Statistics

90%of visitor satisfaction with business matchmaking platform

How the business matchmaking will benefit me and my business?

Meet face-to-face and establish a direct and personal contact with decision makers of purchasing companies

To identify business growth opportunities and trends in Southeast Asia region

Build new relationship in discuss prospectsNote:We respect your privacy. All of your personal contact information will be kept confidential. Rest assured that no contact information will be shared via the meetings platform.

STEP 1

STEP 2


STEP 3

getconnected

STEP 4

* The above topics / speakers / dates / times are correct as of print time and is subject to changes or addition without prior notice.* Kindly visit www.automex.com.my to view the complete programme.

10:30 -11:00

Keynote Speech : Industry 4.0 - From the Idea to Implementation

The networking of virtual and real production has been steadily increasing for years. In Germany, this leads to fascinating perspectives that are summarized under the term Industry 4.0, where intelligent technical systems form the basis for. The keynote contains background information on Industry 4.0. In addition to past developments and current trends in Industry 4.0, application examples from the German Leading Edge Cluster it’s owl will be presented.

SPEAKERProf. Dr.-Ing Roman Dumitrescu(Fraunhofer-Institut für Entwurfstechnik Mechatronik IEM)

11:00 -11:30

Back to Basics - Removing the confusion from the Industry 4.0 discussion

With new technology for manufacturing and data analysis coming online at an exponential rate, Small & Medium size manufacturing companies are feeling overwhelmed with the seeming large task of keeping pace with the ever growing globally connected competitive landscape. Monikers such as Factory of the Future or Industry 4.0 create buzz and a fee of missing out mentality. This phenomena can often cause manufacturers to lose sight of what is most important, maintaining or increase �ow and pro�tability in your production business. This talk will help remove the confusion, and bring the focus back to the basics, and discuss the new way to plan for success in manufacturing.

SPEAKERMr Todd Abraham, Director Business Development, MBA(Monitor ERP System Sdn. Bhd.)

11:30 -12:00

Optimizing Casting Processes through Autonomous Engineering

Productivity is one of the main objectives in the Industry 4.0 revolution. MAGMA is one of the early adopters, implementing this idea practically with optimization features which help to understand and autonomously improve existing processes in the metal casting and manufacturing world. We will showcase how one of our customers overcame production challenges in their brake disc part.

SPEAKERRachmat Santoso, CAE Implementation Manager (MAGMA Engineering Asia Pacific Pte Ltd)

10:00 - 10:30 : Registration

Smart Manufacturing: Automated System Integration & Process ControlIndustry 4.0 • Industrial Internet of Things • Robot Automation • Automated System Integration • High Mix Low Volume Manufacturing • Smart Machine & Smart Automation

Smart Manufacturing: Advanced Manufacturing & Production SolutionArti�cial Intelligent & Machine Learning • 3D Printing & Additive Manufacturing • Latest Welding Technologies • Smart Management on Material Handling & Logistic

MORNING SESSION: 10:00 - 13:00

First step towards Industry 4.0

We are very happy to be aGOLD SPONSOR for Metaltech 2018

Visit us in Booth 3707Email us at [email protected] to book a demonstration

THE BEST CHOICE FOR YOURMANUFACTURING COMPANY

www.monitorerp.asia



DAY 123 May 2018


Bilik Johor/ Kedah


DAY 123 May 2018


Bilik Johor/ Kedah

16:00 -16:30

IIOT – The Solutions for the Digital Future

The IIoT will revolutionize manufacturing by enabling the acquisition and accessibility of far greater amounts of data, at far greater speeds, and far more ef�ciently than before. Integration of all communication from the ERP level to the �eld level is an essential requirement for today's most advanced production systems. To bridge the divide between IT and automation, plant operators are increasingly turning to the IIOT standard. a) The Bene�ts of IIoT b) IIoT Protocols c) Challenges of the IIoT – Brown�eld and Security d) The Future of the IIoT

SPEAKERMcCoy Chung, Sales Engineer of B&R Malaysia(B&R Industrial Automation Pte Ltd)

15:30 -16:00

Industry 4.0 is changing Design and Manufacturing Methodologies

Industry 4.0 has gained momentum and governments around the world de�ning initiatives and programs to support the industry to become more effective and productive. However Industry 4.0 is more than adopting technology, it focus on the methodology as well. Design and manufacturing methodologies will change and being supported by available technology. Companies need to understand that the way how we work and how we are producing a product will create new opportunities and business models. The impact of Industry 4.0 is not only on the technology it is also on our methods and processes as well as on our mind set. Creative and innovative solution will make the difference for the future growth of a business.

SPEAKERMartin Stefan Mueller, Technical Manager(Mawea Industries Sdn Bhd (A Member of IME Group of Companies))


12:30 -13:00

Industry 4.0 Starter Kit for Connected Manufacturing

In a connected manufacturing environment, intelligent machines can communicate and interact with each other in both green�eld and brown�eld environments. Connectivity is a MUST to demonstrate the features of Internet of Things. During this session it will be presented on how one can upgrade new and existing machines with IoT and get started with connectivity in manufacturing operations.

SPEAKERIgor Kabakov, Dipl. Engineer, Senior Sales Manager(Bosch Rexroth Malaysia)


Machine Vision System in Industry 4.0

Machine Vision System are widely used in Medical, Semiconductor/Electronic, Automotive, Food & Beverage, Packaging and Printing industry particularly in Quality products inspections. Today we all see the revolution in the manufacturing world which is Industry 4.0, or IOT, “The Industrial Internet of Things.” Industry 4.0 refers to a set of emerging innovations in advanced Automation + IOT which comprise machine vision, Big Data (sensors), cloud computing and machine learning. The Matrox imaging software can collect camera inspection data and send to data centre or cloud for analysis such as production trend, analysis report and preventive maintenance with some AI (arti�cial intelligence) algorithm. The main objectives of Industry 4.0 are to increase production ef�ciency, reduce waste, re�ne product quality, enhance manufacturing �exibility, decrease operating costs and down-time.

SPEAKERIr. Dr. Kenny Ang Teoh Ong, Director(Control Easy Technology Sdn Bhd)

14:30 -15:00

AFTERNOON SESSION: 14:00 - 17:00


15:00 -15:30

Automation & Modernization Financing Towards Industrial Revolution 4.0

MIDF provides �nancing assistance for manufacturers to upgrade and automate their production facilities. MIDF provides �nancing for purchase of new machinery and equipment including costs related to the automation investment such as consultancy, training, designing, fabrication and installation. The �nancing pro�t rate is low at 4% per annum. The �nancing tenure for machinery or equipment �nancing is up to 10 years inclusive of Grace Period of up to 3 years.

SPEAKEREn Norazlan Bin Zakaria, Head of Marketing, Marketing & Market Development Department, DevelopmentFinance Division(Malaysian Industrial Development Finance Berhad (MIDF))

12:00 -12:30

Making Your Business Data & Model Centric

In an increasingly connected world, your company design IP and processes need to become data-driven and model-based. This will form a �rm foundation for a seamless transition to Industry 4.0. Learn about how the Dassault Systemes SOLIDWORKS innovation platform helps the digital transformation of your business/industry.

SPEAKERLow Hock Chuan, Solution Consultant(Dassault Systèmes Asia Pacific South)









DAY 224 May 2018ThursdayPWTC, Level 2,

Bilik Johor/ Kedah

15:00 -15:30

Collaborative Robots – Your Co-Workers at Work

Join us at Universal Robots (UR) seminar to learn how you can overcome manufacturing challenges in your businesses with collaborative robots (cobots). Reap more returns by deploying cobots, which optimises your processes, increases ef�ciency and productivity as well as improves how the way your employees work.

SPEAKERIx Lee, Regional Sales Development Manager(Universal Robots)

14:30 -15:00

Mitsubishi Electric – Intelligent Robots for Smart Manufacturing

From simple pick-and place-applications, to complex assembly tasks, Mitsubishi Electric industrial robots are equipped with class-leading speed and precision. Coupled with intelligent options like 3D vision, force sensing, seamless PLC and motion control integration, and the ability to operate in “collaborative applications”, Mitsubishi Electric has the robots required for today's demanding manufacturing applications.

Come and join us in this session to �nd out how you can upgrade and automate your manufacturing processes.

SPEAKERMr. Royston Kwik,Sales Engineer(Mitsubishi Electric Asia Pte Ltd)

15:30 -16:00

Automation of Intralogistics

Using collaborative mobile robots is a relatively new way of automating intralogistics. Inhouse transportation tasks are often still done manually by humans spending valuable time pushing carts from A to B. With the autonomous mobile cobots from market leader MiR these tasks can be automated in a simple, ef�cient, and cost-effective way.

SPEAKERMarck Madsen, Area Sales Manager(Mobile Industrial Robots Pte Ltd & EPCO Precision Sdn Bhd)





DAY 325 May 2018

FridayPWTC, Level 2,

Bilik Johor/ Kedah


11:00 -11:30

Innovative Solutions Improving Additive Manufacturing Productivity and Quality

High-end Additive Manufacturing (AM) relies on perfect gas composition to generate functional parts with complex shapes and structures. Linde provides innovative gas solutions for the industry along the entire value chain from powder production all the way to post treatment with Linde ADDvance™ O2 precision device, Powder Cabinet and CRYOCLOEANTM Snow (AM).

SPEAKERDiganta Sarma, Head of Application Technology & Market Development Linde – South Asia & ASEAN Region (Linde)

11:30 -12:00

How Digitalization can affect the Future of Manufacturing

Customers today are facing multiple business challenges. The introduction of Additive Manufacturing (AM) will open up new products and business opportunities. This will lead to a profound and necessary transformation of organizations to successfully implement Additive Manufacturing and initiate disruptive changes. EOS will share more about AM changing current manufacturing and how EOS is working toward industry 4.0 with industrial players.

SPEAKERGerald Wong, Technical Marketing Specialist, EOS – Electro Optical Systems(EOS Singapore Pte Ltd & Positive Yield Sdn Bhd)

12:00 -12:30

Machining of Modern Material

Workpiece material is one crucial factor in metal cutting industry. The presentation will discuss on the trend and demand of workpiece material, the machining characteristic and machinability of the modern material, as well as the change of needs for the people in the metal cutting world.

SPEAKERKatherine Chuah(Seco Tools Sdn Bhd)

10:30 -11:00

Smart Machine Smart Automation – Next-generation Industrial Transport Solutions

Next generation industrial transport technology delivers key advantages for advanced manufacturing solutions. The �exible, independently controlled shuttles on electromagnetic drive conveyors and high speed diverter technology make production more ef�cient while simultaneously improving product quality. Make your line more economic and effective at any volume – from mass production down to batch size one a) Smarter, more integration and smaller footprint production �oor b) High Availability, Ultimate boosts your overall equipment effectiveness (OEE) and accelerate faster in return of investment (ROI)

SPEAKERMark Meng, Managing Director(B&R Southeast Asia)


* The above topics / speakers / dates / times are correct as of print time and is subject to changes or addition without prior notice.* Kindly visit www.metaltech.com.my to view the complete programme.





10 // METALTECH & AUTOMEX 201810 // METALTECH & AUTOMEX 2018 METALTECH & AUTOMEX 2018 // 11


DAY 325 May 2018

FridayPWTC, Level 2,

Bilik Johor/ Kedah

* The above topics / speakers / dates / times are correct as of print time and is subject to changes or addition without prior notice.* Kindly visit www.metaltech.com.my to view the complete programme.


14:30 -15:00

Structural Life Enhancement on Welded Component using High Frequency Mechanical Impact (HFMI) Treatment: An Overview, Current Research and Application

Fatigue Failure in welded structures continues to be topic deserving wide focus due to its contributions to loss of life and substantial costs each year all over the world. The determination of the fatigue life cycle of particular welded structures has led to the invention and development of various structural life enhancement methods. The past decade has seen a remarkable development in the High Frequency Mechanical Impact (HFMI) treatment method as a reliable, effective and user-friendly method for post-weld fatigue life enhancement.

SPEAKERDr. Yupiter HP Manurung, Director of Advanced Manufacturing Technology Excellence Centre (AMTEx) & Associate Professor, Faculty of Mechanical Engineering(Universiti Teknologi MARA (UiTM))

15:30 -16:00

Disruptive Technology: Application of Magnetically Impelled Arc Butt (MIAB) in the oil and gas industry in sustaining the new normal of low petrochemical prices (with case study)

Nowadays, tubes and pipes continue to become more and more important in a range of industries such as the oil and gas, water treatment and the automotive industry. Tubes provide light weight, excellent rigidity, and low cost while steel pipes are still a popular choice for �uid transportation. In particular, tubular components have become more sophisticated, and often require a special weld joint in their construction. Tubular joints represent an ideal application for Magnetically Impelled Arc Butt (MIAB) welding, since the tube geometry plays a signi�cant role in controlling the arc path, which promotes uniform heating of the joint. This process relies on very complex interactions between the arc, magnetic �eld and upsetting force. MIAB is a highly ef�cient energy-saving process of welding, assuring the quality of its weld. Often deemed as a revolutionary welding process due its favourable advantages such as time saving of up to 90%, no �ller material, less defects compared to fusion welding process and many others, This presentation explores the possibility to a wider range of applications in the oil and gas industry with speci�c case studies.

SPEAKERMohamed Ackiel Mohamed, Vice President, Special Projects(Serba Dinamik Group Berhad)

15:00 -15:30

Code Compliance of Locally intensified Welding, Weld on Weld and Proximity, in Offshore Oil and Gas Structure

Most welding design codes require a minimum desistance for adjacent welds. However, sometime in the fabrication stage due to some limitations the minimum distance between two adjacent welds, is not practiced. In the absence of justi�cations by the codes the is an area of need to comprehensively explore the effect of this practice in key mechanical properties. This will enables the operators for an informed decision in regards to the soundness and integrity of the joint.

SPEAKERDr. Hamed Mohebbi, Senior Welding Engineer through Japan Welding EngineeringSociety (JWES), Materials and Corrosion Specialist in prominent Oil and Gascompanies such as Petronas, Perenco UK, Subsea 7


Smart Manufacturing with Automated System Integration & Process Control

Advanced Manufacturing & Production Solution

Pre-register your visit now on www.automex.com.my and www.metaltech.com.my

INDUSTRY SEMINAROUTLINE

Industry 4.0 (i4.0)

Industrial Internet of Things (iiOT)

Smart Machine Smart Automation

Artificial Intelligent (AI), Machine Learning (ML), Deep learning (DL)

High Mix Low Volume Manufacturing

Robot Automation

Automated System Integration

3D Printing & Additive Manufacturing

Latest Welding Technologies

Metal Additive Manufacturing

Smart Management for Material Handling & Logistic

Scope of Topics



OVERVIEWHALL LAYOUT


LEGEND

SingaporePavilion

TaiwanPavilion

KoreaPavilion

METALLURGICAL TECHNOLOGY & EQUIPMENT

ADVANCED PRECISION MACHINING TECHNOLOGIES

The Metallurgy Industry is one of Malaysia’s foothold not just for the manufacturing sector but also for the country’s economy. A whole range of Industries such as automotive, aviation, infrastructure, sheet metal processes, machine tools, building & construction, power, agriculture, railways, engineering, oil and gas, defence, R&D, transport and many more are directly dependent on it.

The Metallurgy International Hub will showcase a wide range of metallurgical technologies and processes including:

Precision Engineering Asia (P.E.A) is a unique, an essential component for numerous high-pro�le manufacturing sectors such as electronics, marines, aerospace, oil & gas, and medical devices industries. It enables businesses to design and build the tiniest microprocessors, state-of-the-art aircraft systems, cutting-edge medical devices and the most heavy-duty oil industry drill bits.

P.E.A provides an all new and unique business platform in Malaysia to showcase the latest precision technology products to local manufacturers.

The Precision Engineering Asia Pavilion showcase a wide range of Advanced Precision Machining & Micromachining including:

*Space Reservation applies only for International Companies.

• Metal Casting• Metal Forging• Laser Cladding• Metal Extrusion• Sintering• Heat Treatment processes

• Electro-plating• Thermal Spraying• Metallography & Crystallography• Powder Metallurgy• Smelting technology

• Ultra-Precision Machining & Parts• Pro�le Grinding Machines• Wire Electrical Discharge Machine (EDM)• Precision Tooling• Diamond Tooling• Carbide Tooling• Precision Polishing

• Ceramic Mold Components• Single Point Diamond Turning• Electro-mechanical System Integration• Die-cast, Jigs & Fixture Parts• Precision Laser Marker• Complex Machining Parts• CNC Turned Parts

LOOK FOR US AT

HALL 5MERDEKA

HALL

LOOK FOR US AT

HALL 4TUN RAZAK

HALL

• Processing equipment of metallurgical raw materials• Non-Ferrous Metals• Foundry• Industrial Furnaces

HALL 6

TUN RAZAK HALL 1TUN RAZAK HALL 2

• Machine Tools Technology• Sheet Metal Technology• Welding Technology

• Automation Technology & Equipments• Electronic Components & Equipment• Process Control & Systems• Robotics

TUN RAZAK HALL 3

• Hardware & Industrial Supplies• Tools & Machinery Hardware• Software & Prototyping Systems• Surface Finishing & Heat Treatment• Pneumatic & Hydraulics• Logistics, Material Handling & Storage Systems• Pumps & Valves• Compressors

TUN RAZAK HALL 4

MERDEKA HALL 5

• Precision Tools & Accessories• Circular Saw , Band Saw & Accessories• Precision Engineering (Ultra Precision Machining)• Moulding & Die-casting• Metal Joining Technology (Welding, Brazing, Soldering, Sintering & Stitching)• Automation Technology• Factory Automation• Robotics

• Metrology & Measurement• Instrumentation & Calibration• Industrial Supplies• Safety Products & Equipment• Marking Products• Metallurgy Products

LEVEL 1LEVEL 3

LEVEL 2

Entrance to Hall 1 & 2

Entrance fromSeri Pacific Hotel

RegistrationCounter

Legah Putra Mall

ShopMTPS

Shop

Legah Putra Mall

ShopMTPS

Shop

Entrance fromJalan Tun Ismail(Main Entrance)

Entrance fromJalan Tun Ismail(Main Entrance)

TUN RAZAKHALL 3TUN RAZAKHALL 3

LEVEL 4

River

River

TUN RAZAKHALL 2

TUN RAZAKHALL 1TUN RAZAKHALL 1TUN RAZAK

HALL 2

TUN RAZAKHALL 4TUN RAZAKHALL 4

MERDEKAHALL 5MERDEKAHALL 5

HALL 6HALL 6


MANUFACTURINGEND-TO-END SOLUTIONS

IN SMARTPHONE

PROCESSES

PRECISIONENGINEERING

METALWORKING

AUTOMATION

14

3

2 DREAM TECHNOLOGY SYSTEM SDN BHDDTS provides complete Product Lifecycle Management (PLM) solutions in software, consulting, services and professional technical training.

RA MACHINERY SDN BHDRA Machinery specialize in dealing with world renowned brands of machine tools and precision equipment.

Glass Engraving Machine - B-700/2C- Gantry structure design- Marble bed for stability- Automatic Loading Arm- Positioning Fixture- Small Pitch Screw- Dynamic balance testing for key parts such as spindle- Integral Touch Screen- Advanced equipment and experienced personnel for QC

MITUTOYO (MALAYSIA) SDN BHDMitutoyo is a world-leading company that pursued the development of nanotechnology, diversifying needs of industry and cooperated in the promotion of IoT and automated technologies.

QV Apex 302Introducing the Standard CNC Vision Measuring System. The model equipped with the tracking focus function that allows continuous focusing in response to change in workpiece height is also available, achieving improvement in measurement throughput. The QV Apex404 and QV Apex606 X-Axis and Y-Axis drive speeds reach 400 mm/second. This model (PRO type only) can support ISO13060-7:2011 guaranteed accuracy (speci�cations on request).

5

6HIWIN SINGAPORE PTE LTDHiwin Technologies Corporation is professionally engaged in the innovation and the manufacturing of ballscrew and motion control components and subsystems.

Articulated Robot - RA605The RA605 articulated robot is a compact and agile 6-axis jointed-arm robot for precise assembly, part transfer and workpiece loading/unloading. Applications for the articulated robot include pick-and-place, handling, assembly, deburring, grinding, polishing and many more. With a 5kg payload capability, this robot is perfect for small and delicate components and product handling; while still being able to perform different types of tasks with different tools attached to it.

SCARA - RS406The RS406 SCARA (Selective compliance assembly robot arm) provides an excellent solution for rapid motion in the horizontal plane for pick-and-place and assembly. SCARA robots are widely used in plastic, automobile, electronics, pharmaceutical and even food industries where fast and precise positioning is essential for maximum productivity. The ability to be wall or �oor mounted also grants the SCARA robot more �exibility for greater options.

MAL AUTONICS SENSOR SDN BHDAutonics is the leading manufacturer and exporter of sensors, controllers, and measuring instruments. Autonics Malaysia will continue to enhance the productivity of our customers in the aforementioned countries by providing innovative, reliable, and ef�cient automation solutions.

AUTONICS FIBRE OPTIC SENSOR - BF5 SERIESThe BF5 series �ber optic ampli�ers are available in single and dual display models. The units feature 5 different response speed settings, for �exible and reliable detection of fast moving targets or small objects. With integrated mutual interference prevention, reliable detection is possible with multiple units (up to 8 units) with connection using side connectors. Other features include saturation prevention function, inverted display, and simple sensitivity adjustment settings. Red, green, and blue LED light source models are available for diverse applications.

DMC SOLUTION (KL) SDN BHDDMC Solution is Malaysia’s leading industrial automation product and solution provider. Key to our philosophy is co-creation where we help with asset productivity and energy savings.

Total System IntegrationThe system uses SCADA/HMI System, PLC, AC Inverter and DC Drive, High ef�ciency AC Motor and DC Motor, Energy Monitoring System and Energy Saving Solution.

Zortrax M300The build volume of 300x300x300 mm (11.8x11.8x11.8 in) and resolution range of 140-300 microns helps you realize even the biggest projects, effortlessly.

The M300 took what’s best of the valued by thousands of users Zortrax M200, including the widely tested single extruder system and platform autocalibration option.

The Zortrax M300 features stand for reliability, precise repeatability and dimensional accuracy, which are now enlarged to give you the possibility of unlimited ideas.

For the �rst time, we’re giving all attendees of METALTECH the chance to learn SMART MANUFACTURING processes through these live product demonstration. Our �rst demonstration – “End-to-End Solutions in Smartphone Manufacturing Processes”- will show how Precision Engineering, Collaborative Robots, and Arti�cial Intelligence (AI) are enabling breakthroughs in smartphone manufacturing.

Visit Us At Hall 4, Level 4

SYSTEM INTEGRATOR

METALTECH HIGHLIGHT:

*The product images shown are for illustration purpose only and may not be an exact representation of the product.

PLATINUM EVENT SPONSOR


SUMBER ENGINEERING TRADING (M) SDN BHD

With nearly 40 years of industry presence in Malaysia, SUMBER ENGINEERING TRADING (M) SDN. BHD. is proud to introduce our house brand, One.ki®, catered for compressed air solutions. We ensure that One.ki® products are of high quality, high durability and easy to maintain. Meet our team at Hall 3, Booth 3130, to �nd out more.

MALAYSIAN INDUSTRIAL DEVELOPMENT FINANCE (MIDF)

Be one step ahead of your competitors!

MIDF provides �nancing assistance for manufacturers to upgrade and automate their production lines at low cost as well as to upgrade production capability and capacity.

The Soft Financing Scheme for Automation and Modernization (SFSAM) was allocated under Rancangan Malaysia Ke-11 (“RMK11”) as catalyst for the local companies to embrace the industrial revolution; with the main intention to encourage local industries to modernize and to adopt automated equipment and to be less dependence towards labor.

The fund is eligible for �nancing of new machinery and equipment plus the cost related to the automation investment such as consultancy, training, designing, fabrication and installation.

The �nancing pro�t rate is low at 4% per annum at yearly rest for SMEs and 5% per annum for Non-SMEs. The tenure for machinery or equipment �nancing is up to 10 years inclusive of Grace Period of up to 3 years to ease the burden by the local companies in their automation investment.

MONITOR ERP SYSTEM

Monitor is a complete ERP System, designed to increase the operational ef�ciency of manufacturing companies. Swedish engineers who specialise in the manufacturing sector have been developing it for over 40 years.

Today the system helps several thousand manufacturing companies in 30 countries to better plan their production while keeping a focused eye on maximising production �ow and company pro�tability.

Because we’ve always focused on ERP solutions for manufacturing companies, we are able to follow a zero customization method when implementing our system. The system is developed in close cooperation with our customers. As a result, MONITOR is both user-friendly and cost effective. Visit us in booth 3707 to �nd out more.

THE BEST CHOICE FOR YOURMANUFACTURING COMPANY

www.monitorerp.asia

DIAMONDEVENT SPONSOR

GOLDEVENT SPONSOR

AIR COMPRESSORSPONSOR

TAIWAN EXCELLENCE

Taiwan took the 4th place in the global machine tool export ranking in the �rst 10 months of 2017, moving up one notch from a year earlier.

To further develop Taiwan the world’s research and manufacturing center for intelligent machinery and related high-end equipment parts and components, the Taiwan government has released a set of blueprints to achieve comprehensive smart manufacturing.

Now, Taiwan Excellence, the highest accolade awarded to Taiwanese products that are outstanding in R&D, design, quality, and marketing, will be present during Metaltech 2018 to showcase and update visitors on some of the award-winning products that are brought in for the exhibition, such as: -

• LV105 Vertical Machining Center by PINNACLE• Straight Side Double Crank Direct Drive Servo Press by CHIN FONG MACHINE INDUSTRIAL• Electric Actuator by TOYOROBOT• SKX COLLET CHUCK by SYIC

Visit us at Taiwan Pavilions in Hall 1, Hall 3 and Hall 4.

SEMINAR SPONSOR HIGHLIGHTS

Seminar Tea Break Sponsors

POSITIVE YIELD SDN BHD

Positive Yield Sdn Bhd is delivery the latest additive manufacturing (AM) technology to industry partners in Malaysia. Current AM technology is transformed from making rapid prototype to series production. Not only shorten the delivery time, AM offer the �exible manufacturability that allow freedom of design for designer to focus on the functionality rather the manufacturability. We also offer the consultation service to help organization to adopt this technology quickly and smoothly.

CADVISION SYSTEMSSDN BHD

Improving the exchange of data from design to manufacturing is among the best ways to speed up the delivery of new designs. SOLIDWORKS provides a direct link to all types of manufacturing machinery to get your designs to manufacturing quickly and accurately. Speed up product development, save time, increase productivity, and accelerate your time-to-market by outputting your manufacturing-oriented CAD data directly from SOLIDWORKS 3D CAD software to manufacturing equipment.

Industry Seminar Main Sponsors

MAGMA ENGINEERING ASIA PACIFIC PTE LTD

MAGMASOFT® is the comprehensive and effective optimization tool for improving metalcasting quality, optimizing process conditions and reducing production costs. Utilizing the methodology of virtual Design of Experiments and Autonomous Optimization, robust process parameters and optimized casting layouts can be established for all cast materials and processes including heat treatment and melt metallurgy. Through Autonomous Engineering, simulations can be used in an automated virtual test plan to pursue quality and cost objectives simultaneously.

LINDE MALAYSIA SDN BHD

Linde ADDvance™ O2 precision is the �rst solution that lets you de�ne the perfect oxygen level for your material and application providing perfect results every time. It uses state-of-the-art engineering to continuously analyze the gas atmosphere in your powder chamber with high precision and without cross-sensitivity. This enables you to choose the perfect atmosphere for any metal and application and guarantees consistent high quality in every single print – with fully unimpaired material properties. Find out more www.linde.com.my and visit us at Booth #3207.


METALTECH PRODUCT HIGHLIGHTS

SLS BEARINGS (MALAYSIA) SDN BHDSKF CooperSKF acquired Cooper Roller Bearings in 2013. It is now marketed under the name of SKF Cooper. SKF Cooper split bearings are the ideal solution to reduce machinery maintenance and repair downtime. Split bearings disassemble into smaller components easing the tasks of lifting and handling, making mounting or replacement simple even in the most cramped and inaccessible conditions. To �nd out more, please visit Hall 3 Booth number 3164.

EASY MACHINES SDN BHDFLX Model by EETO Fiber LaserFLX Model - Fully cover protection design with exchangeable table, video cutting monitoring system with IPG Fiber Laser From 1KW – 4KW. Heavy duty structure design with strictly processing method, ensuring long life time and User-friendly operation system with embedded nesting software.

UNIQUE SPONSOR HIGHLIGHTS

AM MACHINERY SDN BHD

Durma Fiber Laser Tube Cutting Machine, Model: HD-TC 60170Laser tube cutting is speci�cally designed for businesses that care about high quality pro�le and tube cutting. Full automatic Loading and Unloading requires less effort and time save for the operator.

HD-TC Lasers make differences with speed, high quality components, ef�ciency and industrial design.

DOOSAN MACHINE TOOLS

DOOSAN’s global standard vertical machining center, DNM serires• A highly versatile DOOSAN’s vertical machining center offering the largest machining space in its class• Standard Direct-Coupled Spindle for Higher Productivity• An environmental-friendly machine designed for stable and easy operation• Our dealers: Secure Group #Booth no.2240; Promach Machinery Sdn. Bhd.

Lanyard Sponsors

AKA MACHINE TOOLS SDN BHD

i5 Intelligent Systemi5 Intelligent machine tools are based on advanced motion control of the underlying technology and network technology, the birth of the Internet based intelligent terminal. Ef�cient integration of Industry, Information, Internet, Intelligent. To achieve the operation of intelligent, intelligent programming, intelligent maintenance and management of intelligent.

Kindly visit www.akamachine.com.my for more information.

Onsite Visitor Registration Sponsor

BOOTH NO.:

1210BOOTH NO.:

3164



AKYAPAK MAKINAAkyapak AHS 4 Roll Plate Rolls (AHS 30/150)Akyapak Machinery offers reliable and excellent solutions for precise and challenging rolling applications. AHS type machines are the most reasonable choice to bend the materials with a plate thickness of 2 mm to 200 mm and with a plate width of 500 mm to 12000 mm . NC and CNC options can be added on AHS type plate rolling machines.

BOOTH NO.:

2015

BYSTRONIC PTE LTDByStar Fiber 4020• Full power: Whatever you cut in the future, the ByStar Fiber provides everything you need• The highest parts output and premium cutting quality right through to the high range of sheet thicknesses• A maximum degree of operating convenience and transparent process control thanks to the intuitive ByVisionCutting user interface• Unrestricted access to the cutting area from the machine’s long side

BOOTH NO.:

1330

EASY MACHINES SDN BHDCNC Model 4HEL by FACCIN S.P.ACNC Model 4HEL - 4 Rolls Double Pinch Linear Guide Series Synchronized Plate Bending Roll with handling systems speci�cally designed for high productivity of thin rolled plates.

BOOTH NO.:

1210

FANUC MECHATRONICS(MALAYSIA) SDN BHDα-DiB Series• High precision milling, drilling and tapping.• Flexible for all your requirement.• Fast. Dynamic, Reliable.• Highest precision; Most ef�cient machine-hour rate.• 100% from Japan.

BOOTH NO.:

1200

HAAS FACTORY OUTLET A DIVISION OF ROBO CNC SDN BHDHAAS VF-2SSA strong and rigid machine that can cut so ef�ciently that it turns steel into butter.

STOP LOSING ORDERS and start making MONEY. Step into a NEW era of HIGH PERFORMANCE machining and LOW COST production.The best machines in the world are the ones that make MONEY.

Make sure you to watch our demo cut at booth (2180).

BOOTH NO.:

2180

BOOTH NO.:

3600

HITACHI SUNWAY INFORMATION SYSTEMS SDN BHD

Hitachi Sunway is the leading one-stop ICT solutions & services provider in ASEAN with a local presence in 16 locations across 9 countries, supported by 300 workforce and serving more than 1,000 clients. A joint venture company between Hitachi Systems and Sunway Technology – it offers ERP, PLM, Systems Integration, IT Security, Data Centre and Cloud solutions, IT Outsourcing and others. For more information, visit www.hitachi-sunway-is.com

CHIN LAI HARDWARE SDN. BHD.JASIC TIG200D• Inverter IGBT• Easy arc ignition with high frequency• Stable arc without spatter and good shaping• Good arc• Stiffness and concentrated heat• Weld with materials such as steel, stainless steel and titanium, copper, nickel and their alloys.

BOOTH NO.:

3404

MEP SOLUTIONS SDN BHDWire Cut EDM model MV1200SMitsubishi Electric Launching latest Wire Cut EDM Model which equipped with latest D cubes controller which is much advance and user friendly for current market demand.

BOOTH NO.:

1118BOOTH NO.:

1350

MAHO MACHINERY SDN BHDFibre Laser Machine MHL SeriesNINGBO GUANGYUAN MAHO MACHINERY is a professional manufacturer of precision CNC bending machine, CNC hydraulic guillotine shears, hydraulic steelworkers, �ber laser cutting machine and sheet metal equipment. Products are exported to Germany, Malaysia, Singapore, Thailand, Philippines, Belgium & other countries. Please feel free to visit our booth #1350 in METALTECH 2018, to have a �rst-hand experience on our series of world class machines.

BOOTH NO.:

1150

LVD (MALAYSIA) SDN BHDPhoenix FL 6040LVD is a leading manufacturer of sheet metal working machinery for laser cutting, punch presses, press brakes, guillotine shears and automation systems, integrated with its CADMAN® software suite. LVD Industry 4.0-ready products and technology make “Smart Manufacturing” possible. The Phoenix Fiber Laser is an all-around performer that combines cost ef�ciency, dynamic laser cutting, advanced automation solutions and LVD’s intuitive TOUCH-L Control. Models available could handle sheet lengths of 3, 4 and 6 meters. Learn more about the LVD Phoenix FL and other LVD products by visiting our booth at 1150.

IWATANI MALAYSIA SDN BHDArc Welding Robot MOTOMAN-AR1440Arc welding robots are playing a leading role in the automation of automobile manufacturing lines and form part of the foundations of the automobile industry. Yaskawa has developed the ideal robot for arc welding responding to the demands of the automobile industry with the development of the MOTOMAN-AR1440 arc welding robot. This robot achieves increased operating speed, an expanded scope of application and improved user convenience.

BOOTH NO.:

1138

HASIL KARYA SDN BHDFibermak SL-G ForceSide Loading Fiber Laser• Space Optimization - New design of side loading Fibermak SL is a right choice for workshops with limited spaces to �t in, without compromising from standards and quality of Fibermak Momentum Gen-3 G Force. • High Ef�ciency - The productivity is increased average 15% per hour by higher acceleration of 2.5G on Servo Motorized Models by Momentum Gen-3 G Force version and consequently the speed and gaining in time is higher.

BOOTH NO.:

2160


22 // METALTECH & AUTOMEX 2018

ZOLLER MALAYSIA SDN BHDZoller Venturion 450 Pilot 3.0ZOLLER »venturion« tool presetter and measuring machines impress with their unique ergonomics and highest �exibility. With »venturion« you bene�t from the highest accuracy and reliability: Machines are based on a compact, specially alloyed and thermally optimized design, which is also extremely robust and work-shop compatible. This base is supplemented by components which rank among the best in the world.

BOOTH NO.:

2050

TORNOS MANAGEMENT HOLDING SASwiss DT 26The Swiss DT range of Swiss-type lathes is designed to meet the various requirements of typical long and short turned parts for bar size up to 13mm and 25mm.

Main advantages :• Proven kinematics featuring �ve linear axes and two C axes• Modular machining area• Liquid-cooled built-in motorized guide bush with synchronous motor• Guidebush and Non-guidebush interchangeable

BOOTH NO.:

1288

SODICK TECHNOLOGY (M) SDN BHDSODICK AL 400G High Performance Wire-cut EDMSodick is a leading-edge manufacturer of numerically controlled electric discharge, high speed, 3D metal printing, injection machines. Since the founding of the company, we have continuously worked to enhance processing precision through research into our Sodick special technologies. It is our mission to create machine tools that clients �nd pleasure in using.

BOOTH NO.:

1170

SECURE EQUIPMENT TRADING SDN BHDATLANTIX (ATF-T6020) Fiber Laser Pipe Cutting MachineApplicable for metal pipe, square pipe, rectangular pipe & deformed pipe with fast speed and high quality. Smaller cutting gap, lower deformation and perfect cutting edge. Without secondly process, high-accuracy cutting to cut down consumption effectively. Automatically moistening guide rail, both pneumatically back and forward chucks, quickly responding in the corner to improving cutting ef�ciency tremendously. For more information, visit secure.net.my

BOOTH NO.:

2240


MITSUBISHI ELECTRIC ASIA PTE LTD

From simple pick-and place-applications, to complex assembly tasks, Mitsubishi Electric industrial robots are equipped with class-leading speed and precision. Coupled with intelligent options like 3D vision, force sensing, seamless PLC integration, and the ability to operate in “collaborative applications”, Mitsubishi Electric has the robots required for today's demanding manufacturing applications.

UNIVERSAL ROBOTS (SINGAPORE) PTE LTD

Universal Robots, the market leader in collaborative robots, are ideal for applications across industries that require six-axis capabilities where size, safety and costs are critical. Weighing 18 kg, UR5 has lifting capacity of 5 kg and working radius of 850 mm. UR10, with a payload of 10 kg and reach of 1,300 mm is just as �exible and easy to �t into processes. UR3 weighs 11 kg with a 3 kg payload. Featuring 360-degree rotation on all wrist joints and in�nite rotation on the end joint, UR3 is the most �exible, lightweight table-top robot to work alongside operators today.

PROFESSIONAL HITECH SDN BHD

Economical, Precision, Speed, Friendly. Epson T3 Robot provide everything you need for your automation process. With the invention of built in controller, it further save up space for your machine design while all the I/O and vision features still in place. Furthermore, Epson is having wide range of robot which cater all your automation needs and handling process.

AUTOMEX HIGHLIGHTS:INNOVATIVE ROBOT DISPLAY

AND DEMONSTRATION

METALTECH’s much anticipated sister exhibition, AUTOMEX, is back for another landmark edition of the region’s leading Automation and Technology showcase.

With hundreds of local and international automation companies from 11 specialised profiles, AUTOMEX will feature a variety of robotics showcases and

demonstrations. The three highly progressive companies below have already confirmed their much anticipated robotics showcases during this year’s AUTOMEX.

Don’t miss out on learning the secrets of their robotic applications at HALL 6.

Epson T3


ABB MALAYSIA SDN BHDYuMi®

YuMi®, the world’s �rst truly collaborative robot, is making collaboration between humans and robots a reality. YuMi includes �exible hands, parts feeding systems, camera-based part location and state-of-the-art robot control. YuMi is changing the way we think about assembly automation. YuMi is “you and me”, working together to create endless possibilities.

BOOTH NO.:

6700

BOSCH REXROTH SDN BHDConnected Manufacturing (Mms4.0)Bosch Rexroth is a leading supplier and leading user of Industry 4.0. Visit our booth to experience Industry 4.0. A factory in miniature with original industrial standard components which focuses on a product assembly divided into modular stations, completely interconnected, programmable, and extensively secured. Cells can be �exibly added to the system, such as with a 6 axis robot. Plug-and-play concept for immediate use.

BOOTH NO.:

6800

DREAM TECHNOLOGY SYSTEM SDN BHDTeamcenter® SoftwareTeamcenter® software is the world's most widely used Product Lifecycle Management (PLM) system, helping companies manage increasingly complex products, streamline operations and increase productivity. With Teamcenter, it's easier to keep your entire organization on the same page - from product development, to manufacturing, to service and support.

BOOTH NO.:

6400

HMS INDUSTRIAL NETWORKS ABeWon Flexy 205The eWON Flexy 205 is an advanced internet data gateway that allows Machine Builders to monitor and collect vital KPIs for analysis and predictive maintenance. With data logging, alarming, built-in web interface, scripting and enhanced internet connectivity, the Flexy 205 is a modular Internet Gateway for your IoT deployment.

BOOTH NO.:

6916

MAL-AUTONICS SENSOR SDN BHDAiS SeriesThe AiS series 2-phase closed loop stepper motor system offers accurate and precise position control through feedback from the integrated encoder without the hassle of tuning and vibration of conventional servo motors. The encoder feedback provides information of the current position in reference to the input pulse with a high resolution of 10,000 pulses per revolution, allowing precise position control down to 0.036 degrees.

BOOTH NO.:

6206

AUTOMEX PRODUCT HIGHLIGHTS

AIMS MOTION TECHNOLOGY SDN BHDSCHNEIDER ELECTRIC – SMART MACHINE SOLUTIONSAs a pioneer in smart automation technologies, Schneider Electric makes it easier for you to offer your customers more �exible machines. Our future-ready machine solutions help quickly and easily adapt machines to changing production and operator needs. So you and your customers can meet continuously evolving market expectations. Both today and tomorrow.

BOOTH NO.:

6802


BERND SIEGMUND GMBHBooth No: 1310

SIEGMUND Welding Tables and Systems

AIR PRODUCTS MALAYSIA SDN BHDBooth No: 1007

Air Products’ Integra®

Cylinder Range

ABRASIVE ENGINEERING PTE LTDBooth No: 1326

Flow Rate Valve - Ultimate Valve

AC MECA (M) SDN BHD Booth No: 1450

LASER MACHINE

B.H. WELDER & HEATER TECH (M) SDN BHD Booth No: 1012

Spot Welding Machine

EXHIBITORS’PRODUCT 24TH INTERNATIONAL MACHINE TOOLS AND

METALWORKING TECHNOLOGY EXHIBITIONHALL 1


BIRLA PRECISION TECHNOLOGIES LIMITED

Booth No: 1495

Panther Taper Shank Drills

BYSTRONIC PTE LTD Booth No: 1330

ByStar Fiber 4020

CHANGZHOU HIBOO TOOLS CO., LTD

Booth No: 1488

Carbide End Mills, Drills, Reamers

DAIFUKUBooth No: 1100

Automated Storage Retrieval Machine (AS/RS)

Robotics

DÜRR SYSTEMS (MALAYSIA) SDN BHD

Booth No: 1430

HANS LASER SDN BHDBooth No: 1463

Laser Cutting Machine - PD5050

HIGHRISE INDUSTRIES SDN BHD Booth No: 1178

CNC-18TDRE

HOFFMANN QUALITY TOOLS (MALAYSIA) SDN BHD

Booth No: 1160

GARANT Tool24

PickOne

IRC AUTOMATION (M) SDN BHD Booth No: 1452

C1000 / CNC SEALING GLUE MACHINE

IWATANI MALAYSIA SDN BHDBooth No: 1138

YASKAWA ROBOT

HEROLASER MALAYSIABooth No: 1110

LASER CLEANING MACHINE

HEBEI RUIAO MACHINE TOOL ACCESSORIES PRODUCING CO., LTD

Booth No: 1480

Energy Chain

HARBIN TOOL WORKS Booth No: 1427

Gear Cutters

CM MACHINERY SDN BHD Booth No: 1483

VMU SERIES

ELEMENT14 SDN BHDBooth No: 1432

Raspberry Pi 3

FANUC MECHATRONICS (MALAYSIA) SDN BHD

Booth No: 1200

FANUC SCARA SR-3iA

EASY MACHINES SDN BHDBooth No: 1210

FIBER LASER/FLX 3015

DONGGUAN CITY BIGA GRATING MACHINERY CO., LTD

Booth No: 1422

Top 20

DEZHOU PRECION MACHINE TOOL CO., LTDBooth No: 1481

CKS61125D NC BIG LATHE

EXHIBITORS’PRODUCT HALL 1 24TH INTERNATIONAL MACHINE TOOLS AND

METALWORKING TECHNOLOGY EXHIBITION


TSIS WELDING SOLUTION SDN BHD @ CUSTECH MACHINERY SDN BHD

Booth No: 1130

Fronius TPSi CMT Robotic

ZHEJIANG SANOU MACHINERY CO., LTD

Booth No: 1426

Key type chuck

SG MAKE LASER (M) SDN BHDBooth No: HALL 1

Fiber Laser Cutting

NODHA INDUSTRIAL TECHNOLOGY WUXI CO., LTD

Booth No: 1416

ID-Mounted Pipe Beveling Machine

LEEDEN SDN BHDBooth No: 1120

Messer Cutting Systems / Hypertherm XPR-300

ZHEJIANG JULIHUANG SAWING MACHINE GROUP CO., LTD

Booth No: 1417

Metal band sawing

machines used for cutting all

kinds of metals.

WUXI WELL LEADER MACHINERY CO., LTD

Booth No: 1420

WELDING ROTATOR GZ-40

WUXI BONO INTERNATIONAL CO., LTD

Booth No: 1487

Slitting Line & Cut to Length Line

JING DANN MACHINERY CO., LTD Booth No: TMBA

JAGULAR INDUSTRY CTD Booth No: TMBA

JAG-02SP

FUSHENG INDUSTRIAL CO., LTDBooth No: TMBA

CHIN FONG MACHINE INDUSTRIAL CO., LTD

Booth No: TMBA

Press brake

tooling

ANHUI LIYUAN CNC BLADE MOLD MANUFACTURING CO., LTD

Booth No: 1489

Press brake

tooling

JINAN G. WEIKE SCIENCE & TECHNOLOGY CO., LTD

Booth No: 1424

Grinding wheel

KUNSHAN XINLUN SUPERABRASIVES CO., LTD

Booth No: 1482

PROMPT INTEGRATED TECHNOLOGY LTD

Booth No: TMBA

HMC-650 & EDM-432

PINNACLE MACHINE TOOL CO., LTDBooth No: TMBA

BP CASTROL LUBRICANTS (MALAYSIA) SDN BHD

Booth No: 1001

YH MACHINERY SDN BHDBooth No: 1340

Bystronic DNE Fiber laser cutting machine / D-FAST(E)1530F

SHANGHAI HUAWEI WELDING & CUTTING MACHINE SALES CO., LTD

Booth No: 1402

GAS CUTTER/WELDING CARRIAGE/CNC PLASMA

CUTTING (CNC HNC-3000 L)

SHANDONG CHENCAN MACHINERY INCORPORATED COMPANY

Booth No: 1510

CC-SGS1525T-3S cnc aluminum mould machining center

NEW LEAD ENGINEERING PTE. LTD.Booth No: 1324 & 3344

Self Propelled Scissor Lifting Platform / GTJZ

NINGBO CFG MACHINERY INDUSTRIAL CO., LTD

Booth No: 1400

1000 Ton Straight Side Tie Rod Frame 2-Point Crankshaft Drive

Press/SX2-10000

NICECUTT CUTTING TOOLS CO., LTD Booth No: 1428

Boring bars, Threading inserts and holders, Grooving inserts and

holders, End mills, Drills, Taps

LVD PHOENIX FIBER LASER

LVD (MALAYSIA) SDN BHDBooth No: 1150

LTH MACHINERY (M) SDN BHD Booth No: 1440

Pressbrake NCP100-32

LOYAL TOOLS SDN BHD Booth No: 1250

POWER PRESS MACHINEM2-200N1500T/M2

(KM 21HM2/SM2)

LK HOIST CO., LTDBooth No: 1014

HOIST, AIR MOVING FAN /

DA.DB.LT

LIFTECH ENGINEERING GROUPBooth No: 1433

Wire Rope and Chain Hoists

LI CHIN (S.E.A.) SDN BHDBooth No: 1280

LAMP-200 TON

LIONAPEX EQUIPMENT PTE LTD Booth No: 1314

Brother SPEEDIO S1000X1

NANTONG JIARONG MACHINERY CO., LTD

Booth No: 1526

Lathe GH1440A

MADE-IN-CHINA.COMBooth No: 1414

Website

MITSUBISHI - EA8PS

MEP SOLUTIONS SDN BHD Booth No: 1118

MARPOSSBooth No: 1009

iWave2

MAHO MACHINERY SDN BHD Booth No: 1350

FIBRE LASER MACHINE MHL SERIES: MHL 3015E

MYSYNTEC TECHNOLOGY SDN BHDBooth No: TMBA

ROBOTIC ARM

LONGLIFE WELD SDN BHDBooth No: 1005

FineCut CNC Gantry Plasma & Flame Cut

TARMAH VENTILATION SYSTEM MANUFACTURER SDN BHD

Booth No: 1530

EXHAUST CONE FAN (MODEL: OKM54-3TW) MADE IN TAIWAN

TOOLEX PRECISION SDN BHDBooth No: 1440

Punching Tools

TORNOS S.A.Booth No: 1288

CNC Auto Lathe, Swiss DT 26

SWK VENTURE (KL) SDN BHDBooth No: 1460

LASER & WELDING EQUIPMENT

SODICK TECHNOLOGY (M) SDN BHD Booth No: 1170

EDM wire cut AL400G

SJMC MACHINE TOOLS CO., LTDBooth No: 1485

Valve seats boring machine, Model number

BV60

KASTO ASIA PACIFIC PTE LTDBooth No: 1327

KASTOwin A3.3

JIANGSU XUZHOU METALFORMING MACHINE GROUP CO., LTD

Booth No: 1287

H frame power press machine / JH39

JIAXIANG YITAI SHENGYE WELDING EQUIPMENTS CO., LTD

Booth No: 1412

Inverter Drawn Arc Stud Welder

SHENZHEN CREATE CENTURY MACHINERY CO., LTD

Booth No: 1472

T-500B


HALL 2/3EXHIBITORS’PRODUCT

GLOBAL ELECTROMECH (M) SDN BHDBooth No: 2076

CHESTER MACHINE TOOLS

AKA MACHINE TOOLS SDN BHD Booth No: 2260

i5 Intelligent System

QINCHUAN MACHINE TOOL & TOOL GROUP CORP.

Booth No: 2006

YK3132 CNC GEAR

HOBBING MACHINE

AMSAW SOLUTION SDN BHD Booth No: 2036

EVERISING E SERIES CNC BAND SAW MACHINE, MODEL: E-530

3ADM 1200 CNC BEAM DRILLING LINE

AKYAPAK MACHINERYBooth No: 2015

AM MACHINERY SDN BHDBooth No: 2200

DURMA CNC FIBER LASER CUTTING MACHINE, MODEL: HDFS-3015


ASIA MACHINE TOOLS SDN BHDBooth No: 2004

“ASIA” CNC Wire

Cut Machine

DAVI - PROMAU SRLBooth No: 2074

MCB F-80

DONGGUAN CATO MACHINCAL INDUSTRY CO., LTD

Booth No: 2046

Lathe Mill 5 Axis Tapping Center

HAAS VF-2SS

HAAS FACTORY OUTLET A DIVISION OF ROBO CNC SDN BHD

Booth No: 2180

Way Train Bandsaw Machines, Zhangjiagang Hefeng Circular Sawing

Machines, Rontgen Bi-metal Bandsaws, Stark Hss Circular Sawblades, Sawmaster Hss Sawblades, Sugiyama Tct Sawblades

ULTIMATE SAWS & TOOLS SDN. BHD. Booth No: 2066

NORRES INDUSTRIAL HOSES / TECHNICAL HOSES

HUPLONG INDUSTRIES (M) SDN BHDBooth No: 2005

PANSHI MACHINERY (M) SDN BHD Booth No: 2032

Bending Machine/

Press Brake Machine

INFORTECH MACHINERY TRADING SDN BHD

Booth No: 2040 & 3002

ALUMINIUM DOUBLE MITRE SAW MACHINE

SENG HENG MACHINERY TRADING (M) SDN BHD

Booth No: 2056

MB8-CNC-Y1,Y2,X,R,V

TAKAMATSU MACHINERY (THAILAND) CO., LTD

Booth No: 2044

CNC PRECISION

LATHE / XC-100

SECURE EQUIPMENTBooth No: 2240

ATLANTIX - FIBER LASER MACHINE

ZOLLER - Venturion -

Presetting and Measuring Machine

ZOLLER MALAYSIA SDN BHDBooth No: 2050

HYUNDAI E160A

ZMC ENGINEERING (M) SDN BHD Booth No: 2018

ROLL FORM MACHINE

YCE ENGINEERING WORKS SDN BHDBooth No: 2080

Actual Power H-300HA

WINSAW ENGINEERING SUPPLIES SDN BHD

Booth No: 2000

Y & L ECOTECH SDN BHD Booth No: 2070

Showa Denki L: CRM-H04-S22 / R: CRM-H04-V22

Stamping Press Machine /Power Press Machine

WORLD PRECISE MACHINERY CO., LTD

Booth No: 2048

ERMAKSAN FIBER LASER FIBERMAK SL-G FORCE

HASIL KARYA SDN BHD Booth No: 2160

CNC Plasma Cutting Machine

BAYKER MACHINERY (M) SDN BHD Booth No: 2012

HH AUTOMATION SDN BHD Booth No: 2110

LASERCUT MACHINE SYSTEM


PHH SPECIAL STEEL SDN BHD Booth No: 2029

Nippon Koshuha – KD11MAX,

NOGA, GHX, KDAMAX

Hakudo – YH52, HNS303

GRUPPO PARPASBooth No: 2020

UNIKA High Speed-Milling Machine

Jasic inverter welding machine

CHIN LAI HARDWARE SDN BHDBooth No: 3404

5" GMC HEAVY DUTY PU ON CAST

IRON

BUZZWHEEL CASTOR SDN BHDBooth No: 3173

Total Solar Energy Solution Provider

BSL ECO ENERGYBooth No: 3705

AIRMATIC MACHINERY SDN BHDBooth No: 3520

SAS75S - SE - AIRMAN ROTARY SCREW COMPRESSOR

Markforged Metal &

Composite 3D Printer

The Strongest Parts.FOR EVERY ENGINEER.

ADVANCE IMAGE TECHNOLOGIES (M) SDN BHDBooth No: 3133

Dynamic Balancing Machine

ABRO BALANCING UK LTDBooth No: 3142

AIR COMPRESSOR

A.D.I. ATACHI CORPORATION SDN BHD

Booth No: 3320

GEMA Dynamic Contour Detection

AIROCOAT ENGINEERING SDN BHDBooth No: 3192

AKAIDO CORDLESS

DRILL AK12D (12V 1.5AH)

AKAIDO TOOLS SDN. BHD.Booth No: 3638

Polyurethane Roller

ALCHEMY TECHNOLOGY /I-TAC ENGINEERING

Booth No: 3323

ALIGN FASTENERS MFG. SDN BHDBooth No: 3211

M12x165 FISH BOLT

M10x185X1.25p HEX FLANGE BOLT

BOSSARD (M) SDN BHDBooth No: 3384

Fasteners and Engineered Products

Vacuum Pump -

MVO 016

AMAZETECH ENGINEERING & SYSTEMS SDN. BHD.

Booth No: 3122

ALPHAMAX HOLDINGS SDN BHDBooth No: 3395

ES05

GARDNER DENVER / PARKER

APEX AIR ENGINEERING (M) SDN. BHD.Booth No: 3650

LYUSTEC - Precision

Metal Laser Cutting Machine

DONGGUAN MACTRON TECHNOLOGY CO., LTD

Booth No: 3184

SOCO CNC Bending Machine

DOSOCO ENTERPRISE (M) SDN BHDBooth No: 3660

Odyssey X 3D Printer

DESIGNEX 3D SDN BHDBooth No: 3400

COMBI MASTER DRIVES (M) SDN BHDBooth No: 3194

(VARMEX / SIMEX) MC Series Kernel Expleller / Screw Press Drives &

M Series Kernel / Shredder Drives

3D PRINTING STUDIOS ASIA Booth No: 3324

Industrial 3D Printing Solutions and Services


KPR SAFETY WEAR SDN BHDBooth No: 3370

LIAN BENG MACHINERY COBooth No: 3374

KPR SAFETY FOOTWEAR MODEL : L-222

Integrated Rotary Screw 2 In 1 Open Type Compressor,

MIRS100-300H

LINDE MALAYSIA SDN BHDBooth No: 3207

Linde ADDvance™ O2 precision.

M.I.T ACADEMY SDN BHDBooth No: 3716

MECHATRONICS / MECHANICAL MANUFACTURING /

INDUSTRY TRAINING

DYNA FORMING ENGINEERING & TECHNOLOGY SDN BHD

Booth No: 3332

CAE Solution

EC PNEUMATIC & HARDWARE SDN BHD

Booth No: 3715

Self-Clinching Fastener

EDM HOLDINGS SDN BHDBooth No: 3794

F.R.L , Solenoid

Valve, Cylinder, Tubing, Fittings, Actuator




Vibration Isolation Solutions

ISA TECHNOLOGY PTE LTDBooth No: 3342

EM CHEMICAL SDN BHDBooth No: 3393

MXBON Adhesives Expert

EMPICO COATING SDN BHDBooth No: 3333

TEFLON COATING SERVICES

FKE METALLURGIE SDN BHDBooth No: 3017

Ferrous And Non Ferrous Foundry Products

FORCEMAKER 3D PRINTERSBooth No: 3019

x700 3D Printer

HITACHI SUNWAY INFORMATION SYSTEMS SDN BHD

Booth No: 3600

Cyber Security, Data Management, Cloud and Data Centre Services;

Enterprise Resources Planning (ERP), IoT and Mobility; Product Life Cycle

Management (PLM)-CAD, CAM, CAE, PDM, Digital Manufacturing

HHM MACHINERY & INSTRUMENTS SDN. BHD.

Booth No: 3007

NITCHI ELECTRIC

CHAIN HOIST

0.5-5TON

520PCS TOOL GROUP FOR HEAVY DUTY MACHINE

HANS TOOL INDUSTRIAL CO., LTDBooth No: 3018

GRABBIRD.COMBooth No: 3717

eCommerce Hardware Solution

Licota

INGSUN ENGINEERING SDN BHD Booth No: 3380

SPXFLOW Power Team Hydraulic Tools (Cylinders, Pumps, Jacks, Pullers, Torque Wrenches etc.)

IMMCO PTE LTDBooth No: 3360

INFASTECH (M) SDN BHDBooth No: 3225

POP-Avdel Proset XT

JM AUTOMATION SOLUTION SDN BHD

Booth No: 3403

GOUDEN SDN BHD Booth No: 3392

LABORATORIES & CHEMICALS

FURTHER ADVANCE INDUSTRIES SDN BHD

Booth No: 3172

Blickle Castors

and Wheels

GP VALVE & ACTUATOR STORE SDN BHD

Booth No: 3712

ACM080-AD065, 22IG25, AFR-200

FU-LONG METAL INDUSTRIAL CO., LTD.

Booth No: TFPA

Hard Chrome Plated

Steel Bar

Seals Customization

J. R. SEAL TECHNOLOGY (M) SDN. BHD.Booth No: 3113

ITAICHU (M) SDN BHD Booth No: 3024

ISQ HOLDINGSBooth No: 3330

TC-312DM

3M™ DBI-SALA® Fall Protection

MSE LASERTECH (M) SDN BHDBooth No: 3001

MSE FIBER OPTIC LASER MARKING &

ENGRAVING MACHINE

NIMIC FAR EAST PTE LTDBooth No: 3340

Benz Werkz SUPER-THIN

Cut Off Wheel (1MM)

NIPPON BEARING MALAYSIA SDN BHD

Booth No: 3170

NB LINEAR SYSTEM

NEXTEAMWORK CORPORATION SDN BHD

Booth No: 3013

Industry Specialty Maintenance Chemicals

NITTI (ASIA) PTE LTD Booth No: 3364

Nitti Safety Footwear – Low Cut, Mid Cut & High Cut

PANCA HYDRAU-PNEUMATIC SDN BHD

Booth No: 3105

YUKEN DIRECTIONAL CONTROL VALVE

POLY PROJECTS SDN. BHD.Booth No: 3791

PET Strapping Band

POSITIVE YIELD SDN BHD / EOS SINGAPORE PTE LTD

Booth No: 3008

M100Metal 3D printing

machine.

PTN INDUSTRY (M) SDN BHDBooth No: 3016

PRODUCT DEVELOPMENT SOLUTIONS PTE LTD

Booth No: 3353

Production Scheduling

and Planning Software

PRO FILTERS SERVICES Booth No: 3027

AIR OIL SEPARATOR FOR SCREW AIR COMPRESSOR

MONITOR ERP SYSTEM SDN. BHD.Booth No: 3707

Monitor ERP

MSD Lubricants

MSD LUBRICANTS SDN BHDBooth No: 3410

Multimeter, Clamp Meter,

Thermal Imager

MOBICON-REMOTE ELECTRONIC SDN BHD

Booth No: 3793

GARNET (Abrasives)

MBN RESOURCES SDN BHDBooth No: 3012

INDUSTRIAL AIR POLLUTION CONTROL EQUIPMENT & SYSTEMS

MASTER JAYA ENVIRONMENT SDN BHD

Booth No: 3208

M9 Elite Package

M9 ONLINE SDN BHDBooth No: 3795

MASSIVE FAN INDUSTRIES SDN BHD Booth No: 3140

ELPROM Explosion

Proof Motor

MSE INDUSTRIES SDN BHDBooth No: 3000

MSE SMART SERIES LASER

WELDING MACHINE

TEKSOFTBooth No: 3701

Industry 4.0 Implementation

Pipe cutting & Beveling

DWT PIPETOOLS (SEA) PTE LTD Booth No: 3210



ROVSKI SDN BHDBooth No: 3143

HYLOMAR SEALANTS & ADHESIVES

ROLLFLEX (M) SDN BHDBooth No: 3790

DAMON Industry Conveyor Roller

SALESTRADE CORPORATION (S) PTE LTD

Booth No: 3352

Switches & Sensors, Radio Remote Control, Cable & Hose Management System, Wireless Data Transmission,

SEA-RAY ENGINEERING (M) SDN BHDBooth No: 3612

SR Chain Hoist with Remote

Control, SR Electric Winch


SRITA SDN. BHD.Booth No: 3010 & 3110

“Nitto Kohki”Portable

Magnetic Drilling Machine

SOONLEON HARDWARE TRADING SDN BHD

Booth No: 3182

Stabila LAR 350 Rotation Laser

Wire Mesh

SQC WIRE MESH SDN BHDBooth No: 3373

Jonnesway - Hand Tools

SPANDY TOOL MARKETING SDN BHD Booth No: 3607

SUNMADE BRUSH TECH SERVICESBooth No: 3713

SUNMADE – Industrial Brushes

SUNWAY WINSTAR SDN BHDBooth No: 3190

NIETZ N10

SUMBER ENGINEERING TRADING (M) SDN BHDBooth No: 3130

One.ki - ROTARY SCREW

B20A

SURFACE PREPARATION ENGINEERING PTE LTD

Booth No: 3363

Downdraft Workstation

Model WS-7575

TOOLS & MACHINERY PARTS SUPPLIES SDN BHD

Booth No: 3154

HQ Welding Machine

TOLEDO FASTENINGS SDN. BHD.Booth No: 3383

T-Bolt All Stainless

Steel Heavy Duty Clamps /

85 TTBS Series

TEXTRAN FASTENERS SDN. BHD.Booth No: 3414

PEM / GESIPA / DIRAK

SUZHOU DONG WU FENG MACHINERY TECHNOLOGY CO., LTD

Booth No: 3704

FM5*100 Screw

Personal Protective Equipment, Safety Shoes and Work Gloves

Bestrun Shield Mars Oxysafe

TANG SENG TRADING SDN BHD Booth No: 3667

TAV VACUUM FURNACES SPABooth No: 3132

Vacuum furnaces for Heat Treatment

TECOLINE SDN BHDBooth No: 3015

TECOFLEX PVC SPRING HOSE

SKFBooth No: 3164

SKF Cooper split bearings

SHINX CORPORATION CO., LTDBooth No: 3006

Materials(Aluminum, Stainless Steel, Copper, Brass, Special Steel etc)

SIL TECHNOLOGY SDN BHD Booth No: 3124

LEISTER WELDPLAST S2, Hand Extruder Plastic welding

SIN HUAT HIN MACHINERY (M) SDN. BHD.Booth No: 3004

ARROW DIGITAL TRUCK SCALE SYSTEM

VF FASTENING SYSTEMS PTE LTDBooth No: 3354

HBS VISAR 650

VACTECH SDN. BHD.Booth No: 3213

DELFIN TECNOIL 100IF T

ULFLON INDUSTRIAL SDN BHDBooth No: 3123

PTFE Seal Ring

UA MATERIALS SDN BHD (ANOZ INTERNATIONAL SDN BHD)

Booth No: 3152

Anoz 6061 T651

YIK BEE TRADING SDN. BHD.Booth No: 3114

Mechanical Power

Transmission

YUTIEN HYDRAULIC INDUSTRY CO., LTD.

Booth No: TFPA

Hydraulic Valves

AIRTAC INTERNOTIONAL GROUP TAIWAN BRANCH (CAYMAN)

Booth No: TFPA

INDUSTRIAL BRUSH

SODECA INDUSTRIES (M) SDN BHDBooth No: 3150

Axial Fan

SEVEN OCEAN HYDRAULIC IND. CO., LTD

Booth No: TFPA

Hydraulic Valves

YEW LEE PACIFIC MANUFACTURER SDN BHD

Booth No: 3606

INDUSTRIAL BRUSH

YANCHENG LESHA SHOT BLASTING EQUIPMENT CO.,LTD

Booth No: 3402

LS-B650M

XIAMEN GREENAIR COMPRESSOR TECHNOLOGY CO.,LTD

Booth No: 3617

ROTARY SCREW AIR

COMPRESSOR GM75+

WUERTH INDUSTRIAL SERVICES MALAYSIA

Booth No: 3322

ORSY®mat Vending Machine

WEAR TECHNOLOGY SDN. BHD.Booth No: 3719

High Quality Screw Flights

W E SALES & SERVICES SDN BHDBooth No: 3391

Inverter welding Machine

VSMBooth No: 3610

VSM ACTIROX(COMING SOON)

AUTOMATE SYSTEM SALES & SERVICES SDN BHD

Booth No: 3703

Canon imagePROGRAF Large Format Printer

TAI-HUEI OIL HYDRAULIC INDUSTRY CO., LTD

Booth No: TFPA

Solenoid Valve / DSD-G02-2C-D

C24-90

SHANGHAI PEENTECH EQUIPMENT TECH CO., LTDBooth No: 3382

PEM / GESIPA / DIRAK

AED KOMPRESSOREN (M) SDN BHD Booth No: 3510

Oil-free screw air compressors (90-315kw)

JEEPLUS CLEANING EQUIPMENT CO., LTD.

Booth No: 3162

High Pressure Washer

TOP SLINGS TRADING SDN BHDBooth No: 3134

LIFTING POINT

RICA MARKETING SDN BHDBooth No: 3103

BRUSH PLATING EQUIPMENT AND CHEMICALS


JCS PRECISION TOOLING SDN BHD Booth No: 4018

Dümmel system premium carbide cutting tools

Wire Feeder, Torch (Welding and Cutting) and Carriage

HANTO CO., LTD.(SOUTH KOREA)Booth No: 4103

Microset Vio Linear

HAIMER ASIA PACIFIC LTDBooth No: 4113

Industrial Nonwoven / Paper Wipes

HSUAN YU PAPERS.CO.,LTDBooth No: 4 TMBA

LUNG KEE METAL (M) SDN. BHDBooth No: 4005

High Quality Mould Base

LASER INDUSTRIES SDN BHD Booth No: 4008

METAL STAMPING AND SHEET METAL FABRICATION

NANJING WOTIAN TECHNOLOGY CO., LTD.

Booth No: 4203

Pressure Transmitter

PCM390

RUBBER PRODUCTS

WANJUN PRECISION MACHINING SDN BHD

Booth No: 4010

STARK SPABooth No: 4104

BRAVO BLUE

CNC TOOL GRINDING MACHINE

KOBECO MACHINE TOOLS SDN BHDBooth No: 4300

Hoist

KOREA CRANE ENGINEERINGBooth No: 4225

POWER TOOLS

KEYANG ELECTRIC MACHINERY CO.,LTD.

Booth No: 4215

The New Predator Eclipse

Holesaw

ECLIPSE PROFESSIONAL TOOLS Booth No: 4002

INDUSTIAL CHAINS

DONG BO CHAIN. IND. CO.,LTD.Booth No: 4230

ELYON INDUSTRY CO., LTD.Booth No: 4224

WIRE PRODUCTS

SANG SIN PRECISION CO.,LTDBooth No: 4223

Reamer Engineering

Cutting Tools

RNN • HTE Booth No: 4110

SANGCHON INTERNATIONAL CO., LTD.

Booth No: 4232

Spare Parts for Medical

Equipment, Foodstuff Machine,

Semiconductor Equipment, FA

Line and General Machine

SEOUL TECH CO., LTD.Booth No: 4234

SGO.CO.,LTDBooth No: 4221

Self-lubricating bearing

SING HUAT HARDWARE & MACHINERY (M) SDN BHD

Booth No: 4210

Cutting & Machining Tools and Power Transmission Drive Equipments

XIAMEN CHIAPING DIAMOND INDUSTRIAL CO., LTD

Booth No: 4013

Diamond Dressing Block

XIAMEN YUANXING PRECISION TOOL CO., LTDBooth No: 4012

Forming Taps

Mechanical Seal

SETECH CO., LTD.Booth No: 4222

Low Torque Nutrunner :STNR-T-DT 4.5~140kgf-cm

Accuracy : ±0.5%

TOYO AUTOMATION CO., LTDBooth No: TMBA

SHIN-YAIN INDUSTRIAL CO., LTD Booth No: TMBA

MOTION TECH COMPONENT SUPPLYBooth No: 4510

CMK CERA TOOLS (M) SDN BHDBooth No: 4202

PROTEC CO., LTDBooth No: 4220

Special Pneumatic Actuator

AHUJA FELTSBooth No: 4213

PRESSED WOOL FELT

& POLISHING FELT

PRODUCTS

KOTEC / WORLDWELBooth No: 4202

H-BEAM DRILLING

MACHINE / WELDING MACHINE

Slitter Knife

NIREI CORPORATION LTDBooth No: TMBA

HOLER CUTTING TOOL CO., LTDBooth No: TMBA

SHAN HUA PLASTIC INDUSTRIAL CO., LTD

Booth No: TMBA

Tubing / Hose / Coupling / Plug /

Hose Reel / Fittings


EXHIBITORS’PRODUCT HALL 4


AUTOMEX

Collaborative Robots – UR3, UR5 & UR10

UNIVERSAL ROBOTS (SINGAPORE) PTE LTD

Booth No: 4420

TAKTOMAT GMBHBooth No: 4424

LFA Pricison Link Conveyor

Sawyer Collaborative

7-Axis Robot with Embedded Camera

RETHINK ROBOTICSBooth No: 4604

PBA-Hanwha HCR-5

PBA SYSTEMS PTE LTDBooth No: 4502

Insulated Conductor Rails (Power rail) / LCL, UCL, HCL, MCL, ACL

LEEYOUNG IND. CO., LTD.Booth No: 4432

Techman Robot

CHINTECH EC SDN BHDBooth No: 4602

Flash Butt Welder

HERON INTELLIGENT EQUIPMENT CO.,LTD

Booth No: 4433

KUKJE CABLECHAIN - KJP TYPE

KUKJE CABLECHAINBooth No: 4423

I4MART.COMBooth No: 4506

E-Commerce- Industry 4.0

KAWASAKI HEAVY INDUSTRIES (SINGAPORE) PTE LTD

Booth No: 4000

iPad Inspection

duAro

ETCO INDUSTRY CO., LTD.Booth No: 4011

PIPES/FIT-TINGS/-

FLANGE/-COILS



MITUTOYO

REGION SUPPLIERS Booth No: 5038

Z-200 C+ LIBS Analyzer

QES (ASIA-PACIFIC) SDN BHD Booth No: 5208

PLASMOST ENTERPRISE SDN BHDBooth No: 5117

BYK-GARDNER GMBH /

SPECTRO2GUIDE

Heat Treatment Services

PROHEAT TREATMENT SDN BHDBooth No: 5207

ORITRONIC SDN BHD Booth No: 5201

Hitachi Ink Jet Printer UX Series

ORIENTAL IMPORTER SDN BHDBooth No: 5212

PLATFORM SCALE

NK MEASURING INSTRUMENTS SDN BHD

Booth No: 5113

Stereo Microscope with HD Camera -

SZM7045-HD6(no pc required)

2308B / Computer Servo Controlled Universal

Testing Machine

OBSNAP INSTRUMENTS SDN BHDBooth No: 5005

MECHTRO SDN BHD Booth No: 5302

CNC VIDEO MEASURING

MACHINE V 4030C

MAHR MALAYSIA SDN BHDBooth No: 5133

Marshaft Scope

250 Plus

M&T INNOVATIONS (M) SDN BHDBooth No: 5025

PFINDER CHEMIC / PT & MT Chemical Spray

MeasurLink

MITUTOYO (MALAYSIA) SDN. BHD.Booth No: 5100

Hexagon MI Global S CMM

HEXAGON MANUFACTURING INTELLIGENCEBooth No: 5120

Hiwin Robot

HIWIN SINGAPORE PTE LTD Booth No: 5140

Industry 4.0 Implementation

IME GROUP OF COMPANIESBooth No: 5018

KLASIK INDAH SDN BHDBooth No: 5009

Struers Duramin Hardness

Tester

Autodesk

3DTECH SOLUTIONS SDN BHD Booth No: 5023

Nagman FMCS: Flow Meter Calibration System

AMENAG CALIBRATION SOLUTIONS AND SERVICES SDN BHD

Booth No: 5016

DPSTAR THERMO ELECTRIC SDN BHD

Booth No: 5203

Hanyoung, AX Series Temperature Controller

DURA TOOLS SDN BHD Booth No: 5215 & 5233

Fraisa (Switzerland),

Multi Functional Cutter

COUPLING

BEST MAC ENGINEERING (M) SDN BHD Booth No: 5031

Screwing Robot

ATOM ELECTRONICS (M) SDN BHDBooth No: 5185

BRILLIANT SPRAYTEC SDN. BHD.Booth No: 5022

Wagner TopFinish RobotBell

ACCRETECH (M) SDN. BHD.Booth No: 5130

SURFCOM TOUCH

ACCURATE TECHNOLOGY & SERVICES SDN. BHD.

Booth No: 5196

TESA MICRO-HITE

FIRST METROLOGY SDN BHDBooth No: 5115

ATOS 3D Scanner

FIRMTEST ELECTRONICS (M) SDN BHDBooth No: 5012

Fluke

FARO Quantum FaroArm

FARO SINGAPORE PTE LTDBooth No: 5013

ENSHINMAZ Centrifugal Oil

Cleaning System (Fully Auto

Desludging)

ENLIGHTENED SUMMIT SDN BHDBooth No: 5024

Fipa Vacuum Equipments

CENTRICORP (M) SDN BHDBooth No: 5000

Mitutoyo (Japan)

Linear Height

CENTRAL TECHNIC INDUSTRIAL SUPPLIES SDN BHD

Booth No: 5304

COMAU ROBOTICS

DNC AUTOMATION (M) SDN BHDBooth No: 5220

COMETECH TESTING MACHINESBooth No: 5112

BSL TECHNOLOGIESBooth No: 5136

FV-ARS9000-Fully automatic microhardness tester

ANALYTICAL SOLUTION & ENGINEERING SDN BHD

Booth No: 5195

Leica Absolute Tracker AT960

CAIRNHILL METROLOGY SDN BHDBooth No: 5170

Analyzer, pump and

instrumentation

QC-546M2F Universal Testing

Machine

INNOVATEST (Netherlands) Hardness Testers

LMS SCIENTIFIC SOLUTION SDN BHD

Booth No: 5150

Mitutoyo HR-530

Hardness Tester

LESOSHOPPE SDN BHDBooth No: 5002

FS1018 Safety Shoe

LEEDEN HERCULES SDN. BHD.Booth No: 5209

LETROMEC INDUSTRIES (KL) SDN BHD Booth No: 5190

HIWIN - Industry 4.0 Best Partner


XRAY XDV-SD

FISCHERBooth No: 5036

Blasting Machine - Apron Type

GMSB ENGINEERING SDN BHDBooth No: 5206

GT INSTRUMENTS SDN BHDBooth No: 5300

AI-7000 seriesPrescale, Microfilter and Vision

Lens

FUJIFILM (MALAYSIA) SDN BHDBooth No: 5152

PRECISIONENGINEERING

HEIMATEC GMBHBooth No: 4332

Heimatec Swiss Tooling

SCHUNK INTEC PTE.LTD.Booth No: 4320

Co-act EGP-C Gripper

Taiwan Pan-Globe

Temperature Controller

SPEEDY HEATING & TAIWAN PAN-GLOBE

Booth No: 5026

SCP AUTOMATION (M) SDN BHDBooth No: 5232

INDUSTRIAL WATER CHILLER (0.5HP-100HP) Material

SEIKIDO TECHNOLOGY SDN BHDBooth No: 5204

TECHHAUS SDN BHDBooth No: 5007

Harris Model HP 701 - High Purity

Single Stage Chrome Plated Brass Regulator

VIGA - System for

Powder Making

ALD VACUUM TECHNOLOGIES GMBHBooth No: 5230F

METALLUGRYINTERNATIONAL HUB

ZEISSBooth No: 5110

COMET LƎD 2, T-SCAN CS,

CONTURA G2, O-INSPECT

HENKO MACHINE TOOLS PTE LTD Booth No: 5030

VICIVISION / M1

Rotary Torque Sensor UTM II

UNIPULSE CORPORATIONBooth No: 5014

METROLOGY

VGSM VSC & ABERLINK

VGSM TECHNOLOGY (M) SDN. BHD.Booth No: 5173

ULVAC MALAYSIA SDN BHDBooth No: 5223

HELIUM LEAK DETECTOR

TOKYO CHOKOKU MARKING PRODUCTS CO.,LTD.

Booth No: 5205

Metal Pin Marker / MarkinBOX, Patmark

LM Guide, Ball Screw, Actuator

THK CO.,LTD.Booth No: 5160

Spray nozzles, Spray Systems, Spray Analysis & Spray Fabrication

SPRAYING SYSTEMS (M) SDN. BHD.Booth No: 5034


METALWORKING TECHNOLOGY EXHIBITION


・Particle Counter・Microscopes・Mist Cleaner

SANKYO MACHINE TOOLS (MALAYSIA) SDN.BHD.

Booth No: 5032

SAFETYWARE SDN. BHD.Booth No: 5210

CH101KPRIGAKU EDXRF NEX DE

RGS CORPORATION SDN BHD Booth No: 5213

HUT-C Universal Tensile Machine

for Stranded Wire

REVSOLUTION SDN BHDBooth No: 5211

igus® energy chain:- Carry control, data & motor cables, tubing, hoses; in many possible motions & lengths.

chainflex® cables:- More than 1,354 highly flexible cables types. 36 months Guarantee.

IGUS® MALAYSIA SDN BHDBooth No: 6302

Timer, Counter, Temp &

Control Relay, Sensor, etc

JUSTY ELECTRONICS (M) SDN BHD Booth No: 6918

Servo Planetary GearboxCompliance Light

I-LINEAR AUTOMATION SDN BHDBooth No: 6001 & 6028

IKA AUTOMATION SDN BHDBooth No: 6022

NACHI (MZ Series) & FATEK

(FBs Series)

DELTA ENERGY SYSTEMS (SINGAPORE) PTE LTD

Booth No: 6200

SCARA Robot

NX

DREAM TECHNOLOGY SYSTEM SDN BHD

Booth No: 6400

EMPOWER DRIVES & AUTOMATION SDN BHD

Booth No: 6306

FEM Motor & Gearbox

Baldor-Ac/Dc(Nema/IEC) \gear motor, KB Penta-Dc controller, MAYR-Clutch brake,

safety brake,torque limiter,coupling, Luyang-Small power Ac/Dc gear motor,

Hitachi-Inverter/Ac motor

ENGSUP AUTOMATION SDN BHDBooth No: 6010

MiR (Mobile Industrial Robots) / MiR200

EPCO PRECISION SDN BHD Booth No: 6300

eWON Flexy 205

HMS INDUSTRIAL NETWORKSBooth No: 6916

LK 360 High Speed Cable

ID Printer

HTP ENTERPRISEBooth No: 6912

SKF TLSD SINGLE POINT AUTOMATIC LUBRICATOR

ESSMART SYSTEMS SDN BHDBooth No: 6911

Machine Vision System

CONTROL EASY TECHNOLOGY SDN BHD

Booth No: 6004

MACHINE VISION AND INDUSTRIAL BARCODE READERS

COGNEX SERVICE LIMITEDBooth No: 6014

IMAGE DIMENSION MEASURING

SYSTEM

KEYENCE (M) SDN BHDBooth No: 6418

Olympus 3D Measuring Laser Microscope

CREST SYSTEMS (M) SDN BHDBooth No: 6900



YUMI

ABB MALAYSIA SDN BHDBooth No: 6700

ACTIVE NINE TRADINGBooth No: 6021

ES series IP68 – Screw bolt opening-closing type

B&R INDUSTRIAL AUTOMATION PTE LTD

Booth No: 6604

ACOPOStrak

AIMS MOTION TECHNOLOGY SDN BHD

Booth No: 6802

SMART MACHINE SYSTEM - SCHNEIDER ELECTRIC

BOSCH REXROTH SDN BHDBooth No: 6800

Connected Manufacturing

(Mms4.0)

BIBUS MALAYSIA SDN. BHD.Booth No: 6030

BIBUS

CHANGZHOU WINPARK ELECTRONICS CO., LTD

Booth No: 6019

Industry Automatic Temperature Control System

CADVISION SYSTEMS SDN BHDBooth No: 6904

SOLIDWORKS


SIGNAL CONVERTER AND DIGITAL

PANEL METER

WATANABE JAPANBooth No: 6024

Solar Pump Inverter

ZHEJIANG SAIKONG ELECTRICAL TECHNOLOGY CO., LTD

Booth No: 6015

Industrial Automation Solutions

MITSUBISHI ELECTRIC ASIA PTE LTDBooth No: 6100

Nikon ModelMaker

H120

NIKONBooth No: 6502

AGV - Automated

Guided Vehicle

NISHIO RENT ALL (M) SDN BHDBooth No: 6017

OGP SMARTS

COPE FLASH

CNC300

OPTICAL GAGING (M) SDN BHDBooth No: 6927

ORIENTAL DM SDN BHDBooth No: 6917

High Precision Servo Gear Reducer

AiS Series

MAL AUTONICS SENSOR SDN BHDBooth No: 6206

ARC SPRAY SYSTEM

METALLIZING EQUIPMENT CO. PVT. LTD.Booth No: 6901

WEH Quick Connector TW17H

MAKES SDN.BHD (WEH GMBH)Booth No: 6032

POSITIONING CONTROL

MOTOR (AZ)

ORIENTAL MOTOR (M) SDN BHDBooth No: 6006

TOWER LIGHT, LIMIT SWITCH, PUSH BUTTON, SENSORS, TERMINAL BLOCK, RELAYS, SSR

PRIMA CONTROL TECHNOLOGY PLTBooth No: 6025

Your One Source Supplier In Automation System & Industrial Product

PLANT & MILL SUPPLIES PTE LTDBooth No: 6923

PROFESSIONAL HITECH SDN BHD (PHT)Booth No: 6008

Epson / Epson T3

Chinese brand HCFA PLC, Servo motor and driver, Inverter, HMI.

S K U AUTOMATION INDUSTRIAL SUPPLY SDN BHD

Booth No: 6905

Solenoid Operated Directional Valves

REXPOWER SDN BHDBooth No: 6011

Multi-Axis Closed-Loop Stepping PB with

EtherCAT Interface

SANYO DENKIBooth No: 6500

SERVO ENGINEERING SDN. BHD.Booth No: 6919

PILZ Automation and Safety Products.


PHOXI® 3D SCANNER

IN A BIN PICKING

APPLICATION

SODA VISION PTE LTD Booth No: 6600

SINFONIA TECHNOLOGYBooth No: 6702

PARTS FEEDER /

DM SERIES

SIKO Magline Linear Scale and Sensor

SIKO PRODUCTS ASIA PTE LTDBooth No: 6922

STAUBLI SINGAPORE PTE. LTD.Booth No: 6602

Staubli - All Fluids Quick Couplings

ELECTROMAGNET CONTROLLER TYPE FSC

SYAWAL MESRA ENGINEERING SDN BHD

Booth No: 6003

Gear Motor Gear Box

WANSHSIN SEIKOU (HUNAN) CO.,LTD

Booth No: 6914

Servo Motor, Steppcr Motor, Motor Driver

WENLING YUHAI ELECTROMECHAANICAL CO., LTD

Booth No: 6019

EN600 High performance flux

vector control inverter

SHENZHEN ENCOM ELECTRIC TECHNOLOGIES CO., LTD

Booth No: 6013

LEAD CONTACTS:

Ms. Geonice ChongProject ManagerE: [email protected]

ADVERTISING & SPONSORSHIP:

Ms. Kelly LiauE: [email protected]

MARKETING:

Ms. Lee Pui TengE: [email protected]

Mr. Tan Kian YapE: [email protected]

Ms. Winnie LeeE: [email protected]

For Exhibiting & Visiting, please contact:

A-11-02A, Empire Tower Of�ce, Empire Subang, Jalan SS16/1,47500 Subang Jaya,Selangor, Malaysia

T: +603 5022 1999F: +603 5022 1900

01 contents fa - automex€¦ · show | 24th international machine tools and metalworking...

Documents