001-005 presentacion 2017b - bluemaster · 6,0 bw306 115x65 bw306x150 150x90 bw306x200 200x120 7,0...

30

Upload: nguyenduong

Post on 11-Apr-2018

216 views

Category:

Documents


1 download

TRANSCRIPT

446

PD CPD CPD-100 HPDØ

mm € € € €

PD0500 5,00 CPD0500 CPD0500-100

HPD1

PD0600 6,00CPD0600 CPD0600-100PD0650 6,50

PD0800 8,00

PD0850 8,50CPD0850 CPD0850-100PD0900 9,00

PD1000 10,00

PD1050 10,50 CPD1050 CPD1050-100PD1200 12,00

PD1450 14,50

CPD1450

CPD1450-100

HPD2PD1600 16,00 CPD1600-100

PD1800 18,00 CPD1800-100

PD2000 20,00 CPD2000-100

GBD

GBP

EDP

1 2 3PD: CPD: HPD:

Construction drill bitsPink

DIAMOND DRILL BITS FOR VERY HARD MATERIAL LIKE STONEWARE, HARD CERAMIC, ETC

GBP

STEP 3Diamond

interchangeable cutter

STEP 1Shank

STEP 5Application and

accessories

STEP 4Water cooling

GBD

DIAMONDPOINT

STEP 2The body is adapted

by Poly-clic quicksystem

Water intake

• 8 holes: Ø 4 - 5 - 6 - 6,5 - 8 - 10 - 12 - 13 mm

• Easy adaptation of cooling system.

• Fixing with suction pad for a perfect adherence in plane surfaces.

• Center drilling and cooling in glass, stoneware, hard tiles, etc.

CAN FOR WATER REFRIGERATION

• Other compositions on request- Capacity: 1,1L.

Content:(1 Ud) PD0500(1 Ud) PD0600(1 Ud) PD0800(1 Ud) PD1000 (1 Ud) CPD0500 (1 Ud) HPD1 (1 Ud) MPDV (1 Ud) CPD0600(1 Ud) CPD0850-100(1 Ud) PDA (Hex Key)

GUIDE FOR CENTERING DRILLS ANDDIAMOND CUTTERS

Diamond interchan-geable point cutters.

Body length.Available in 50 or 100 mm

Shank with internal water cooling.

GBD22,76 €

9,27 €

EDP

610,39 €

30,77 43,19 61,55

314,91

36,5436,54 44,73 61,5561,55

61,5567,31 49,35 69,2467,31

67,31 47,01 69,2476,94

88,48

57,84

76,94

390,5098,10 76,94

109,63 76,94

128,86 84,63

447

L1 L2

D1

BW9D1mm

L1x L2mm €

BW90300 3,0 85 x 40BW90350 3,5 85 x 40BW90400 4,0 85 x 45BW90450 4,5 85 x 45BW90500 5,0 85 x 45BW90550 5,5 100 x 60BW90600 6,0 100 x 60BW90650 6,5 100 x 60BW90700 7,0 125 x 70BW90750 7,5 125 x 70BW90800 8,0 125 x 70BW90850 8,5 125 x 70BW90900 9,0 150 x 85BW91000 10,0 150 x 85BW91050 10,5 150 x 85BW91100 11,0 150 x 85

BW99325 BW993184 5

Ø 4 - 5 - 6 - 8 mm Ø 3 - 4 - 5 - 6 - 8 mm

Ømm

R.P.M.Máx..

R.P.M.Mín..

3,0 1350 11004,0 1200 10005,0 1100 9206,0 1000 8307,0 900 7408,0 800 6509,0 700 550

10,0 600 50011,0 550 450

CGB

Cons

tructi

on dr

ill bit

sGr

eyPin

k

PROFESSIONAL HIGH PERFORMANCE TILE BITS

Ref. BW9 Revolutionary tip geometry

Extra

professional

series

• The innovation of this drill bit comes from its carbide grade, the welding technique and its revolutionary geometry.• For use with portable or electric drill in rotary mode.• Must be used with abundant water refrigeration, if not possible, use sprayed water. Not suitable for dry drilling.APPLICATIONSFor hard and abrasive ceramics, as stoneware or hard tile. This high performance bit will make a hole where all theothers have failed.

REFERENCEQUANTITYQUALITY EXTRA-PROFESSIONAL EXTRA-PROFESSIONALCONTENTPRICE €

CUTTING SPEED R.P.M.COOLING GUIDE WITH TANK

104,37 127,13

22,2922,2922,2922,2923,5724,0224,6525,1128,2128,7330,5931,1637,0737,0749,0148,11

10,22 €

448

BW7D1mm

L1x L2mm €

BW704 4,0 80 x 40BW705 5,0 90 x 45BW706 6,0 100 x 55BW708 8,0 120 x 65BW710 10,0 140 x 70

L1

L2

D1

BW793254

Ø 4 - 5 - 6 - 8 mm

Ømm

R.P.M.Máx..

R.P.M.Mín..

3,0 1350 11004,0 1200 10005,0 1100 9206,0 1000 8307,0 900 7408,0 800 6509,0 700 550

10,0 600 50011,0 550 450

GreyConstruction drill bits

STANDARD HIGH PERFORMANCE TILE BITS

Ref. BW7

Standard

series

CUTTING SPEED R.P.M.

REFERENCEQUANTITYQUALITY STANDARDCONTENTPRICE €

• Always drill in rotary mode• Cooling with water, and if it’s not possible, cooling with a spray

APPLICATIONS:• Very hard and abrasives ceramics, tile...

5,966,076,079,71

10,56

31,28

449

CPSD1mm

L1x L2mm €

CPS05 5,0 8,5 67 x 33CPS06 6,0 8,5 67 x 33CPS08 8,0 8,5 80 x 33CPS10 10,0 8,5 80 x 33CPS12 12,0 8,5 80 x 33CPS14 14,0 8,5 80 x 33

L1

L2

D1

Cons

tructi

on dr

ill bit

sGr

ey

DIAMOND TILE DRILL BIT

Ref. CPS

Diamond

series

Dry

Working

Paraffi n

· Always drill with rotary mode· CPS may drill ceramics without water thanks to its innovative mechanism of autolubrication with parrafi n. Nevertheless, by using water you’ll increase the performance of the drill dramatically· Start drilling with an angle between 15º and 30º and then keep on drilling horizontally. No Guide needed· Drill ceramics with soft circulary movements to make easier the further extraction of the core· Before fi nishing, stop pushing strongly to avoid the core to get stucked inside the holesaw· It’s suitable to extract manually the perforated core, after each drilling operation· More holes in less time and with less effort· The internal tank of parrafi n can not be refi lled

27,8528,2531,2538,3645,3649,99

450

CPHD1mm

L1x L2mm €

CPH05 5,0 8,5 55 x 25CPH06 6,0 8,5 55 x 25CPH08 8,0 8,5 55 x 25CPH10 10,0 8,5 55 x 25CPH12 12,0 8,5 55 x 25CPH14 14,0 8,5 55 x 25

L1

L2

D1

CGB

Construction drill bitsGrey

Pink

DIAMOND TILE DRILL BIT

Ref. CPH

Diamond

series

· Always drill with rotary mode· Cooling with plenty of water during the drilling operation· CPH drill may drill ceramics whenever some water will be between the diamond and the piece to be machined· Never put the CPH Drill in water after drilling operations. Once the drill achieve high temperatures, let it getting cooled by the air.· Start drilling with an angle between 15º and 30º and then keep on drilling horizontally. No Guide needed· Drill ceramics with soft circulary movements to make easier the further extraction of the core· Before fi nishing, stop pushing strongly to avoid the core to get stucked inside the holesaw· Extract the perforated core by the lateral opening· More holes in less time and with less effort

COOLING GUIDE WITH TANK

15,0216,1121,1122,2727,4731,16

10,22 €

451

Super

L1

L2

D1

BW393185

Ø 3 - 4 - 5 - 6 - 8 mm

150 mm 200 mm 330 mmD1mm

L1x L2mm €

L1x L2mm €

L1x L2mm €

L1x L2mm €

3,0 BW303 100x453,2 BW30320 100x453,5 BW30350 100x50 BW30350X150 150x90 BW30350X200 200x1204,0 BW304 100x50 BW304X150 150x904,5 BW30450 100x50 BW30450X150 150x90 BW30450X200 200x1205,0 BW305 115x65 BW305X150 150x90 BW305X200 200x1205,5 BW30550 115x65 BW30550X150 150x90 BW30550X200 200x1206,0 BW306 115x65 BW306X150 150x90 BW306X200 200x1207,0 BW307 125x75 BW307X200 200x1208,0 BW308 125x75 BW308X330 330x2009,0 BW309 150x90 BW309X330 330x200

10,0 BW310 150x90 BW310X330 330x20011,0 BW311 150x9012,0 BW312 170x120 BW312X330 330x20013,0 BW313 170x12014,0 BW314 170x120

Cons

tructi

on dr

ill bit

sGr

ey

DELTAGON DRILLS SPECIAL FOR GRANITE STRAIGHT SHANK

Deltagon

seriesRef. BW3

• Innovation at the welding carbide head system, to supportimportant efforts.

APPLICATIONS :• Granite, marble, concrete, stone and brick.

ADVANTAGES:• Makes more holes than any other drill bit.• Faster drilling with less effort.• Better hole roundness and fi nish.• Lower cost per hole.

REFERENCEQUANTITYQUALITY DELTAGON SERIESCONTENTPRICE €

SHORT SERIES LONG SERIES EXTRA LONG SERIES

15,8015,8015,80 28,77 35,9715,80 28,7715,80 30,58 37,7817,60 30,58 37,7817,60 34,18 39,5719,38 34,18 39,5721,19 41,3822,98 48,5526,58 48,5526,58 52,1530,1832,37 62,9534,1837,78

95,07

452

DIN8039

L1

L2

D1

12,70

12,70

*

150 mm 200 mmD1mm

L1x L2mm €

L1x L2mm €

L1x L2mm €

3 BW103 70x304 BW104 70x305 BW105 85x45 BW105X150 150x806 BW106 100x50 BW106X150 150x80 BW106X200 200x1257 BW107 100x50 BW107X150 150x808 BW108 120x70 BW108X150 150x80 BW108X200 200x1259 BW109 120x70 BW109X150 150x80

10 BW110 120x70 BW110X150 150x80 BW110X200 200x12511 BW111 150x8012 BW112 150x80 BW112X200 200x12513 BW113* 150x8014 BW114* 150x80 BW114X200* 200x12515 BW115* 160x8016 BW116* 160x80 BW116X200* 200x12518 BW118* 160x80 BW118X200* 200x12520 BW120* 160x8022 BW122* 160x8024 BW124* 160x8025 BW125* 160x8030 BW130* 160x80

300 mm 400 mm 600 mmD1mm

L1x L2mm €

L1x L2mm €

L1x L2mm €

6 BW106X300 300x210 BW106X400 400x2808 BW108X300 300x210 BW108X400 400x280

10 BW110X300 300x210 BW110X400 400x280 BW110X600 600x48012 BW112X300 300x210 BW112X400 400x280 BW112X600 600x48013 BW113X300* 300x210 BW113X400* 400x280 BW113X600* 600x48014 BW114X300* 300x210 BW114X400* 400x280 BW114X600* 600x48015 BW115X300* 300x210 BW115X400* 400x280 BW115X600* 600x48016 BW116X300* 300x210 BW116X400* 400x280 BW116X600* 600x48018 BW118X300* 300x210 BW118X400* 400x280 BW118X600* 600x48020 BW120X300* 300x210 BW120X400* 400x280 BW120X600* 600x48022 BW122X300* 300x210 BW122X400* 400x280 BW122X600* 600x48024 BW124X300* 300x210 BW124X400* 400x280 BW124X600* 600x48025 BW125X300* 300x210 BW125X400* 400x280 BW125X600* 600x480

GreyConstruction drill bits

CARBIDE TIPPED HAMMER DRILLS

Ref. BW1

Standard

series

From 13 mm Ø all the drills have reduced shank

SHORT SERIES LONG SERIES

1,071,091,18 2,111,31 2,11 4,021,55 2,631,71 2,98 4,021,97 3,482,09 3,89 5,053,063,55 5,564,065,19 7,356,707,73 10,899,19 12,42

11,2913,1417,1816,3932,52

5,21 6,405,21 7,056,18 7,58 9,287,05 9,30 11,668,35 9,66 12,298,58 10,24 13,92

11,56 12,59 16,5511,51 13,50 18,3813,06 15,30 20,9715,64 17,84 25,0519,81 25,89 30,2329,47 29,80 39,0129,80 31,81 39,42

453

DIN8039

BW19325 BW19328 BW193184 4 5

Ø 4 - 5 - 6 - 8 mm Ø 5 - 6 - 8 - 10 mm Ø 3 - 4 - 5 - 6 - 8 mm

BW19327 BW19434 BW193195 7 8

Ø 4 - 5 - 6 - 8- 10 mm Ø 4 - 5 - 6 - 7 - 8 - 10 - 12 mm Ø 3 - 4 - 5 - 6 - 7 - 8 - 9 -10 mm

Ø 3 Ø 5 Ø 8 Ø 10 Ø 12 Ø 3 Ø 5 Ø 8 Ø 10 Ø 12

3200 1900 1300 1100 900 2100 1200 900 700 600

Cons

tructi

on dr

ill bit

sGr

ey

CARBIDE TIPPED HAMMER DRILLS IN PLASTIC BOXES

Ref. BW1

Standard

series

CUTTING SPEED R.P.M.

BrickSandstonePlasterGypsumAsbestos

Soft material

MarbleCementConcreteBlackboardLimestoneGranite

Hard material

REFERENCEQUANTITYQUALITY STANDARD SERIES STANDARD SERIES STANDARD SERIESCONTENTPRICE €

REFERENCEQUANTITYQUALITY STANDARD SERIES STANDARD SERIES STANDARD SERIESCONTENTPRICE €

9,27 11,64 10,30

10,34 19,45 15,49

454

DIN8039

L1

L2

D1

12,70

12,70

*

150 mm 200 mmD1mm

L1x L2mm €

L1x L2mm €

L1x L2mm €

3,0 BW603 70x303,5 BW60350 70x304,0 BW604 70x304,5 BW60450 85x455,0 BW605 85x45 BW605X150 150x805,5 BW60550 85x456,0 BW606 100x50 BW606X150 150x80 BW606X200 200x1406,5 BW60650 100x507,0 BW607 100x50 BW607X150 150x808,0 BW608 120x70 BW608X150 150x80 BW608X200 200x1409,0 BW609 120x70

10,0 BW610 120x70 BW610X150 150x80 BW610X200 200x14011,0 BW611 150x8012,0 BW612 150x80 BW612X200 200x14013,0 BW613* 150x8014,0 BW614* 150x80 BW614X200* 200x14015,0 BW615* 160x8016,0 BW616* 160x80 BW616X200* 200x14018,0 BW618* 160x80 BW618X200* 200x14020,0 BW620* 160x8022,0 BW622* 160x8024,0 BW624* 160x8025,0 BW625* 160x80

300 mm 400 mm 600 mmD1mm

L1x L2mm €

L1x L2mm €

L1x L2mm €

6 BW606X300 300x200 BW606X400 400x280 BW606X600 600x5008 BW608X300 300x200 BW608X400 400x280 BW608X600 600x500

10 BW610X300 300x200 BW610X400 400x280 BW610X600 600x50012 BW612X300 300x200 BW612X400 400x280 BW612X600 600x50013 BW613X300* 300x200 BW613X400* 400x28014 BW614X300* 300x200 BW614X400* 400x280 BW614X600* 600x50015 BW615X300* 300x200 BW615X400* 400x280 BW615X600* 600x50016 BW616X300* 300x200 BW616X400* 400x280 BW616X600* 600x50018 BW618X300* 300x200 BW618X400* 400x280 BW618X600* 600x50020 BW620X300* 300x200 BW620X400* 400x280 BW620X600* 600x50022 BW622X300* 300x200 BW622X400* 400x280 BW622X600* 600x50024 BW624X300* 300x200 BW624X400* 400x280 BW624X600* 600x50025 BW625X300* 300x200 BW625X400* 400x280 BW625X600* 600x500

GreyConstruction drill bits

CARBIDE TIPPED HAMMER DRILLS PROFESSIONAL QUALITY

Ref. BW6Professional

series

From 13 mm Ø all the drills have reduced shank

SHORT SERIES LONG SERIES

EXTRA LONG SERIES

2,833,042,833,052,86 3,953,113,16 4,36 5,773,613,64 5,113,84 6,09 6,484,725,40 7,97 8,667,038,28 10,05

10,0112,10 16,5914,0715,33 19,2619,12 24,6725,0428,4344,7945,89

8,73 9,86 16,109,63 10,07 20,12

10,21 13,38 20,4613,18 16,78 25,7115,42 20,2218,75 21,95 30,6821,35 25,66 38,2923,19 25,66 36,8127,36 31,90 47,1033,50 36,09 55,2140,62 45,75 69,0645,06 55,05 84,6048,30 59,09 91,05

455

DIN8039

BW69325 BW69328 BW69318 BW693274 4 5 5

Ø 4 - 5 - 6 - 8 mm Ø 5 - 6 - 8 - 10 mm Ø 3 - 4 - 5 - 6 - 8 mm Ø 4 - 5 - 6 - 8 - 10 mm

BW69434 BW693197 8

Ø 4 -5 -6 -7 -8 -10 -12 mm Ø 3 -4 -5 -6 -7 -8 -9-10 mm

Ø 3 Ø 5 Ø 8 Ø 10 Ø 12 Ø 3 Ø 5 Ø 8 Ø 10 Ø 12

3200 1900 1300 1100 900 2100 1200 900 700 600

Cons

tructi

on dr

ill bit

sGr

ey

CARBIDE TIPPED HAMMER DRILLS PROFESSIONAL QUALITY IN PLASTIC BOXES

Ref. BW6Professional

series

CUTTING SPEED R.P.M.

BrickSandstonePlasterGypsumAsbestos

Soft material

MarbleCementConcreteBlackboardLimestoneGranite

Hard material

REFERENCEQUANTITYQUALITY PROFESSIONAL SERIES PROFESSIONAL SERIES PROFESSIONAL SERIES PROFESSIONAL SERIESCONTENTPRICE €

REFERENCEQUANTITYQUALITY PROFESSIONAL SERIES PROFESSIONAL SERIESCONTENTPRICE €

17,01 20,62 19,75 22,21

36,41 35,20

456

DIN8039

L1

L2

D1

BW159325 BW159328 BW159318 BW1593274 4 5 5

Ø 4 - 5 - 6 - 8 mm Ø 5 - 6 - 8 - 10 mm Ø 3 - 4 - 5 - 6 - 8 mm Ø 4 - 5 - 6 - 8 - 10 mm

BW159434 BW1593197 8

Ø 4 -5 -6 -7 -8 -10 -12 mm Ø 3 -4 -5 -6 -7 -8 -9-10 mm

12,70

12,70

*

150 mm 250 mmD1mm

L1x L2mm €

L1x L2mm €

L1x L2mm €

3,0 BW1503 70x303,5 BW150350 70x304,0 BW1504 70x304,5 BW150450 85x455,0 BW1505 85x45 BW1505X150 150x805,5 BW150550 85x45 BW150550X150 150x806,0 BW1506 100x50 BW1506X150 150x806,5 BW150650 100x50 BW150650X150 150x807,0 BW1507 100x50 BW1507X150 150x808,0 BW1508 120x70 BW1508X250 250x1909,0 BW1509 120x70

10,0 BW1510 120x70 BW1510X250 250x19011,0 BW1511 150x8012,0 BW1512 150x80 BW1512X250 250x19013,0 BW1513* 150x8014,0 BW1514* 150x80 BW1514X250* 250x19015,0 BW1515* 160x8016,0 BW1516* 160x8018,0 BW1518* 160x8020,0 BW1520* 160x80

GreyConstruction drill bits

CARBIDE TIPPED HAMMER DRILLS EXTRA PROFESSIONAL QUALITY

Extra

professional

seriesRef. BW15

From 13 mm Ø all the drills have reduced shank

REFERENCEQUANTITYQUALITY EXTRA-PROFESSIONAL EXTRA-PROFESSIONALCONTENTPRICE €

REFERENCEQUANTITYQUALITY EXTRA-PROFESSIONAL EXTRA-PROFESSIONAL EXTRA-PROFESSIONAL EXTRA-PROFESSIONALCONTENTPRICE €

SHORT SERIES LONG SERIES EXTRA LONG SERIES

5,225,705,226,155,28 7,686,23 9,185,81 8,237,21 8,685,81 11,666,98 12,128,568,61 13,389,95

11,64 17,8815,6218,97 20,6022,8624,5228,7537,72

27,17 31,93 32,39 35,75

56,54 56,65

457

L1

L2

D1

BW8D1mm

L1x L2mm €

BW804 4 70 x 30BW805 5 85 x 45BW806 6 100 x 50BW807 7 100 x 50BW808 8 120 x 70BW809 9 120 x 70BW810 10 120 x 70BW812 12 150 x 80

BW89325 BW893284 4

Ø 4 -5 -6 -8 mm Ø 5 -6 -8 -10 mm

BW89327 BW894345 7

Ø 4 -5 -6 -8 -10 mm Ø 4-5-6-7-8-10-12 mm

DIN8039

Cons

tructi

on dr

ill bit

sGr

ey

CARBIDE TIPPED MULTI-PURPOSE HAMMER DRILLS

Ref. BW8Multi-purpose

Professional

REFERENCEQUANTITYQUALITY MULTIPURPOSE PROF. MULTIPURPOSE PROF.CONTENTPRICE €

REFERENCEQUANTITYQUALITY MULTIPURPOSE PROF. MULTIPURPOSE PROF.CONTENTPRICE €

6,506,597,568,689,54

10,9114,0815,10

33,88 43,38

48,46 75,03

458

SuperSDSPlus

L1L2

D1

116 mm 166 mm 216 mm 266 mmØ

mmL1x L2mm €

L1x L2mm €

L1x L2mm €

L1x L2mm €

4,0 3 BW9904X116 116x505,0 3 BW9905X116 116x50 BW9905X166 166x100 BW9905X216 216x1506,0 3 BW9906X116 116x50 BW9906X166 166x100 BW9906X216 216x150 BW9906X266 266x2007,0 3 BW9907X166 166x100 BW9907X216 216x1508,0 3 BW9908X116 116x50 BW9908X166 166x100 BW9908X216 216x150 BW9908X266 266x2009,0 3 BW9909X166 166x100 BW9909X216 216x150

10,0 3 BW9910X116 116x50 BW9910X166 166x100 BW9910X216 216x150 BW9910X266 266x20011,0 3 BW9911X166 166x100 BW9911X216 216x15012,0 3 BW9912X166 166x100 BW9912X216 216x150 BW9912X266 266x20013,0 3 BW9913X166 166x10014,0 3 BW9914X166 166x100 BW9914X216 216x150 BW9914X266 266x20015,0 3 BW9915X166 166x100 BW9915X216 216x15016,0 3 BW9916X166 166x100 BW9916X216 216x150 BW9916X266 266x20017,0 3 BW9917X166 166x10018,0 3 BW9918X166 166x100 BW9918X216 216x150 BW9918X266 266x20020,0 3 BW9920X166 166x100 BW9920X216 216x150 BW9920X266 266x20022,0 5 BW9922X270 270x20024,0 5 BW9924X270 270x20025,0 5 BW9925X270 270x20026,0 5 BW9926X270 270x200

316 mm 466 mmØ

mmL1x L2mm €

L1x L2mm €

8,0 3 BW9908X316 316x25010,0 3 BW9910X316 316x250 BW9910X466 466x40012,0 3 BW9912X316 316x250 BW9912X466 466x40014,0 3 BW9914X316 316x250 BW9914X466 466x40015,0 3 BW9915X316 316x25016,0 3 BW9916X316 316x250 BW9916X466 466x40017,0 3 BW9917X316 316x25018,0 3 BW9918X316 316x250 BW9918X466 466x40020,0 3 BW9920X316 316x250 BW9920X466 466x40022,0 5 BW9922X320 320x250 BW9922X470 470x40024,0 5 BW9924X320 320x250 BW9924X470 470x40025,0 5 BW9925X320 320x250 BW9925X470 470x40026,0 5 BW9926X320 320x250 BW9926X470 470x400

GreyConstruction drill bits

DELTAGON PROFESSIONAL HAMMER DRILL BITS SDS PLUS SHANK

Deltagon

seriesRef. BW99

3 EDGESØ < 22 mm

5 EDGESØ > 22 mm

22,7423,64 24,48 38,4924,48 26,24 41,14 45,85

26,24 41,0826,29 27,13 41,99 47,63

30,65 48,1431,54 32,39 51,63 57,75

32,39 51,6333,23 55,99 58,6137,5840,24 64,77 73,2953,12 86,1358,61 87,50 100,8164,1768,73 99,76 117,2980,64 113,76 132,83

150,20168,99178,35187,75

54,9762,98 78,7870,88 97,1177,87 113,6096,19105,15 132,95117,29122,47 138,21139,95 172,26165,22 184,00182,11 202,78200,89 221,54212,16 227,18

459

BW393185

Ø 3 - 4 - 5 - 6 - 8 mm

SuperSDSPlus

DELTAGON

BW99D9358 BW99D9412 BW99D9319 BW99D93204 6 4 5

Ø 5 -6 -8 -10 x 116 mm Ø 5-6-8x116mm Ø 6-8-10x166 mm Ø 5 -6 -8 -10 x 166 mm Ø 5-6-x116mm Ø 6-8-10x166 mm

BW99D0080 BW99D07087 6

Ø 5-6-8 x 116 mm Ø 6-8-10-12 x 166 mm Ø 6 x 116 mm Ø 6-8-10-12-14 x 166 mm

Cons

tructi

on dr

ill bit

sGr

ey

DELTAGON PROFESSIONAL HAMMER DRILL BITS SDS PLUS SHANK

Deltagon

seriesRef. BW99

Standard drill Deltagon

REFERENCEQUANTITYQUALITY DELTAGON SERIES DELTAGON SERIES DELTAGON SERIES DELTAGON SERIESCONTENTPRICE €

REFERENCEQUANTITYQUALITY DELTAGON SERIES DELTAGON SERIESCONTENTPRICE €

Concrete

Concrete

Re-ber

ADVANTAGES

Improved drilling in reinforced concrete.Drills into a concrete steel rebarwhen it does not cover more than1/3 of the tip

Exclusive features that offer superiorperformance to any other drill bit and reduces the cost per hole.

Penetrate through sheet plates.Drill into metal deck plate up to 1mm thick and then concrete.

Innovative carbide head welding technology.Supports continuous and greatefforts and pressure in reinforcedconcrete.

111,25 168,62 121,79 140,64

214,59 207,21

460

SDSPlus

L1

L2

D1

W05L1 x L2 (mm)

D1mm

110x50 165x100 215x150 265x200 315x250 465x400 615x550 1005x950

€ € € € € € € €

3,00 3,50 4,00 5,00 5,50 6,00 6,50 7,00 8,00 8,50 9,00 9,50

10,00 11,00 12,00 13,00 14,00 15,00 16,00 17,00 18,00 19,00 20,00 22,00 23,00 24,00 25,00 26,00 28,00 30,00 32,00 35,00 38,00 40,00

GreyConstruction drill bits

PROFESSIONAL HAMMER DRILL BITS SDS PLUS

Professional

seriesRef. W05

• Self centering high performance carbided tipped point.• Higher drilling speed and better durability.• 4 spiral fl utes for faster drilling and fast dust removal.• Accurate drill holes thanks to reduced friction.• Longer lifetime thanks to minimun friction in fl utes and head point.

• Easier drilling thanks to faster drilling and dust removal.• For use in rotary hammer machines with SDS PLUS shankAPPLICATIONS• Concrete and construction materials, marble, granite,blackboard, stone.

* Till end of stock

14,73 16,5412,87 13,18

6,19 10,545,07 6,45 10,24 13,62 15,635,92 6,87 12,28 17,155,22 6,02 9,05 13,43 22,81 30,496,66 7,36 14,04 14,38 18,536,66 7,36 11,79 15,51 19,60 27,426,57 6,62 8,37 12,17 17,90 24,40 42,43

10,998,49 10,22 12,44

10,44*7,05 8,22 9,97 12,62 16,95 26,18 38,45 100,83

10,17 12,36 13,91 25,67*9,22 11,34 13,96 20,74 25,12 38,42 95,08

14,54 18,93 17,85 20,58* 33,74*14,88 16,36 18,27 22,19 29,34 43,60 103,3216,79 20,69* 21,74 23,90 35,73

20,48 22,52 25,49 34,89 46,87 117,3027,50 46,27 48,3127,71 45,18 39,84 64,48 140,5133,85 41,91 46,5931,67 34,25* 41,80 51,56 71,43 147,90

39,74 48,71* 57,09 92,84 152,0056,39*46,74 70,8950,10 55,31* 64,86 90,90 166,5052,46 82,08

121,08 130,13145,03 166,24138,36 192,36181,25 221,36198,36 255,36233,36 291,25

461

SDSPlus

W05D9358 W05D9412 W05D9319 W05D93204 6 4 5

Ø 5 -6 -8 -10 x 110 mm Ø 5-6-8x110mm Ø 6-8-10x165 mm Ø 5 -6 -8 -10 x 165 mm Ø 5-6-x110mm Ø 6-8-10x165mm

W05D0080 W05D07087 6

Ø 5-6-8 x 110 mm Ø 6-8-10-12 x 165 mm Ø 6 x 110 mm Ø 6-8-10-12-14 x 165 mm

L1 x L2 (mm)

Ømm

110x50 165x100 215x150

€ € €5,06,08,010,012,0

L1 x L2 (mm)

Ømm

165x100

€6,08,0

10 U. 50 U.

Cons

tructi

on dr

ill bit

sGr

ey

PROFESSIONAL HAMMER DRILL BITS SDS PLUS

Professional

seriesRef. W05

W05 DRILLS 10 PIECES BOX W05 DRILLS 50 PIECES BOX

REFERENCEQUANTITYQUALITY PROFESSIONAL SERIES PROFESSIONAL SERIES PROFESSIONAL SERIES PROFESSIONAL SERIESCONTENTPRICE €

REFERENCEQUANTITYQUALITY PROFESSIONAL SERIES PROFESSIONAL SERIESCONTENTPRICE €

28,29 44,40 34,02 36,84

69,26 76,29

45,65 57,9646,97 54,16 81,3759,23 59,71 75,3163,37 74,00 89,79

82,90 102,13

261,76274,48

462

SDSPlus

L1

L2

D1

W55L1 x L2 (mm)

D1mm

110x50 160x100 210x160 250x200 300x250 460x410 600x550 800x750 1000x950

€ € € € € € € € €

5,06,06,58,0

10,012,014,016,018,020,022,024,025,028,030,0

4 Z

GreyConstruction drill bits

4 EDGE HAMMER DRILL BITS (OPTIMAL CENTERING)

Ref. W55

Extra

professional

series

4 EDGES

· 4 Carbide edges-high performance· Higher effi ciency improved · Centering of the drill, accurate holes and fi nishing· Higher lifetime due to reduced friction

7,05 8,78 13,17 15,12 19,837,23 8,79 12,13 14,51 19,90 32,508,73 9,24 13,34 15,70 20,039,12 9,30 13,23 15,06 21,50 31,34 52,459,77 11,32 14,79 17,38 25,10 34,60 50,40 136,82 137,44

12,78 15,74 19,61 27,39 37,71 57,83 139,9518,76 22,68 25,35 30,77 40,71 61,99 145,42

31,00 48,03 67,07 155,61 161,4343,18 54,83 92,28 193,3846,22 70,98 102,24 203,5453,61 78,57 127,77 209,1863,06 97,57 142,15 223,7467,60 89,26 148,26 238,31

144,06 154,82 190,39 244,13172,57 197,79 243,23 305,04

463

SDSPlus

L1

L2

D1

BW88D9358 BW88D9412 BW88D9319 BW88D93204 6 4 5

Ø 5 -6 -8 -10 x 115 mm Ø 5-6-8x115mm Ø 6-8-10x165 mm Ø 5 -6 -8 -10 x 165 mm Ø 5-6-x115mm Ø 6-8-10x165 mm

BW88D0080 BW88D07087 6

Ø 5-6-8 x 115 mm Ø 6-8-10-12 x 165 mm Ø 6 x 115 mm Ø 6-8-10-12-14 x 165 mm

BW88L1 x L2 (mm)

D1mm

110x50 115x50 160x100 165x100 215x150 265x200 365x300 465x400€ € € € € € € €

5,05,56,06,57,08,0

10,012,014,0

Cons

tructi

on dr

ill bit

sGr

ey

REINFORCED CONCRETE HAMMER DRILL BITS SDS PLUS SHANK

Ref. BW88

Extra

professional

series

REFERENCEQUANTITYQUALITY EXTRA-PROFESSIONAL EXTRA-PROFESSIONAL EXTRA-PROFESSIONAL EXTRA-PROFESSIONALCONTENTPRICE €

REFERENCEQUANTITYQUALITY EXTRA-PROFESSIONAL EXTRA-PROFESSIONALCONTENTPRICE €

• Drill in hammer made mode4 Edged geometrySecondary side edges help main edges during drilling.Tapered center tip for optimal hole guiding for drilling in concrete rebar.Drilling in concrete rebarConstant high speed drilling in concrete with rebar.High performance in reinforced concrete, marble, slate and stones.

APPLICATIONS:• High performance in reinforced concrete, marble, slate and stones.

69,73 109,16 80,36 85,27

131,50 142,39

12,34 16,53 17,9321,49 23,59

12,94 15,21 24,06 24,9217,34 21,63 34,8817,42 21,4019,76 19,15 23,83 28,29 40,00 52,6621,43 25,35 28,28 34,51 58,09 66,11

25,94 35,30 39,95 57,46 69,4047,78 55,12 61,98 88,45 100,02

464

SDSMax

DELTAGON

L1

L2

D1

DLMAXD1mm

L1x L2mm €

DLMAX10.0X340 10,0 340x200 3DLMAX12.0X340 12,0 340x200 3DLMAX13.0X340 13,0 340x200 3DLMAX14.0X340 14,0 340x200 3DLMAX15.0X340 15,0 340x200 3DLMAX16.0X340 16,0 340x200 3DLMAX18.0X340 18,0 340x200 3DLMAX20.0X340 20,0 340x200 3DLMAX22.0X340 22,0 340x200 5DLMAX23.0X340 23,0 340x200 5DLMAX24.0X320 24,0 320x200 5DLMAX25.0X320 25,0 320x200 5DLMAX26.0X320 26,0 320x200 5

DLMAXD1mm

L1x L2mm €

DLMAX10.0X540 10,0 540x400 3DLMAX12.0X540 12,0 540x400 3DLMAX13.0X540 13,0 540x400 3DLMAX14.0X540 14,0 540x400 3DLMAX15.0X540 15,0 540x400 3DLMAX16.0X540 16,0 540x400 3DLMAX18.0X540 18,0 540x400 3DLMAX20.0X540 20,0 540x400 3DLMAX22.0X540 22,0 540x400 5DLMAX23.0X540 23,0 540x400 5DLMAX24.0X520 24,0 520x400 5DLMAX25.0X520 25,0 520x400 5DLMAX26.0X520 26,0 520x400 5

Super

GreyConstruction drill bits

REINFORCED CONCRETE & STONE SDS MAX DELTAGON HAMMER DRILL BITS

Deltagon

seriesRef. DLMAX

3 EDGESØ < 22 mm

5 EDGESØ > 22 mm

Reinforced concrete drilling:Drills into concrete steel rebar when it does not covermore than 1/3 of the tip.

CHARACTERISTICS:• Nearly perfect holes.• Centering operation improved.• Easy to work through low impact drilling.• Improved drilling speed.• Safer drill against scrap metal.• Penetrate through deck plate up to1,6 mm and then concrete.• Minimum wear outside diameter.

APPLICATIONS:• Reinforced concrete, brick, concrete blocks, stone, etc…• Recommended for use with any SDS-MAX shank compatible machine.

Standard drills Deltagon

EDG

ES

LONG SERIES 340 mm

EDG

ES

LONG SERIES 540 mm

METAL

REIN

FOR

CED CO

NCR

ETE

121,58125,71129,83133,95140,14150,44152,50173,11201,95201,95216,38236,98243,18

179,28181,35183,41185,47187,53189,60193,71206,08255,54267,90267,90304,99309,12

465

SDSMax

AXD1mm

L1x L2mm €

AX12.0X340 12 340x180AX12.0X540 12 540x400AX12.0X740 12 740x550AX12.0X940 12 940x800AX13.0X340* 13 340x180AX13.0X540* 13 540x400AX14.0X340 14 340x180AX14.0X540 14 540x400AX14.0X740 14 740x600AX14.0X940 14 940x800AX15.0X340 15 340x180AX15.0X540 15 540x400AX16.0X340 16 340x180AX16.0X540 16 540x400AX16.0X740 16 740x600AX16.0X940 16 940x800AX16.0X1340 16 1340x1200AX17.0X340 17 340x200AX17.0X540 17 540x400AX18.0X340 18 340x180AX18.0X540 18 540x400AX18.0X720 18 720X600AX18.0X940 18 940X800AX18.0X1320 18 1320X1200AX19.0X320 19 320x200AX19.0X520 19 520x400AX20.0X320 20 320x180AX20.0X520 20 520x400

L1

L2

D1

AXD1mm

L1x L2mm €

AX20.0X720 20 720x600AX20.0X920 20 920x800AX20.0X1320 20 1320x1200AX22.0X320 22 320x180AX22.0X520 22 520x400AX22.0X720 22 720x600AX22.0X920 22 920x800AX22.0X1320 22 1320x1200AX24.0X320 24 320x180AX24.0X520 24 520x400AX24.0X1500 24 1500x1320AX25.0X320 25 320x180AX25.0X520 25 520x400AX25.0X720 25 720x600AX25.0X920 25 920x800AX25.0X1320 25 1320x1200AX25.0X1500 25 1500x1320AX26.0X320 26 320x180AX26.0X520 26 520x400AX28.0X320 28 320x180AX28.0X520 28 520x400AX28.0X720 28 720x530AX28.0X920 28 920x800AX28.0X1320 28 1320x1200AX28.0X1500 28 1500x1320AX30.0X320 30 320x180AX30.0X520 30 520x400AX32.0X320 32 320x180

AXD1mm

L1x L2mm €

AX32.0X520 32 520x400AX32.0X720 32 720x600AX32.0X920 32 920x800AX32.0X1320 32 1320x1200AX32.0X1500 32 1500x1320AX35.0X520 35 520x400AX35.0X720 35 720x530AX35.0X920 35 920x800AX35.0X1320 35 1320x1200AX36.0X1500 36 1500x1320AX38.0X520 38 520x400AX38.0X720 38 720x600AX40.0X520 40 520x400AX40.0X720 40 720x600AX40.0X920 40 920x800AX40.0X1320 40 1320x1200AX40.0X1500 40 1500x1320AX42.0X1500 42 1500x1320AX45.0X520 45 520x400AX45.0X1500 45 1500x1320AX52.0X520 52 520x400

SDSMax

160 mm

L1

D1

AXD1mm

L1x L2mm €

AX45.0X590 45,0 590x450AX45.0X990 45,0 990x850AX55.0X590 55,0 590x450AX55.0X990 55,0 990x850AX65.0X590 65,0 590x450AX65.0X990 65,0 990x850AX80.0X590 80,0 590x450AX80.0X990 80,0 990x850

Cons

tructi

on dr

ill bit

sGr

ey

SDS MAX HAMMER DRILL BITS

Ref. AXProfessional

series

4 EDGES

2 ED

GES

SDS MAX BREAKTHROUGH ONE PIECE DRILL BITS FOR DRILLING LARGE DIAMETERS FROM Ø 45 TO 80 MM

Ref. AXProfessional

series

459,12494,47513,91564,61568,32638,69665,02777,51

69,9282,40

104,30152,24

77,1086,8275,9886,90

123,18158,80

79,7396,9895,21

108,00127,67160,09354,39100,81115,12

99,87117,24140,17162,43361,35106,95119,22100,46119,60

160,51184,64366,03111,30127,94164,04193,84371,71116,27136,21370,40119,96137,05184,17212,61340,89387,38146,29145,84143,91158,35203,15254,35441,45491,79149,58164,90161,66

199,37239,92290,41487,27553,64214,42243,67348,38515,00601,64259,72305,56309,64353,35382,83613,41696,65731,84335,44805,11451,70

466

SDSQuick

L1

L2

D1

BQ7D1mm

L1x L2mm €

BQ70400 4,0 85 x 40BQ70500 5,0 100 x 55BQ70600 6,0 100 x 55BQ70800 8,0 120 x 75BQ71000 10,0 120 x 75

SDSQuick

BQ8D1mm

L1x L2mm €

BQ80400 4,0 85 x 40BQ80500 5,0 100 x 55BQ80600 6,0 100 x 55BQ80800 8,0 120 x 75BQ81000 10,0 120 x 75

L1

L2

D1

Ø 3 Ø 5 Ø 8 Ø 10 Ø 12 Ø 3 Ø 5 Ø 8 Ø 10 Ø 12

3200 1900 1300 1100 900 2100 1200 900 700 600

BQ79327 BQ79319 BQ89327 BQ893195 8 5 8

Ø 4 - 5 - 6 - 6 - 8 mm Ø 4-4-5-5-6-6-8-10 mm Ø 4 - 5 - 6 - 6 - 8 mm Ø 4-4-5-5-6-6-8-10 mm

GreyConstruction drill bits

DRILLS FOR UNEO BATTERY DRILL SDS QUICK SHANK

Ref. BQ7Professional

series

• Drill in hammer mode

APPLICATION• Concrete• Granite• Stone

Ref. BQ8Professional

Multipurpose

• Drill in rotary - hammer modeAPPLICATION• Brick• Soft metal• Wood

CUTTING SPEED R.P.M.

BrickSandstonePlasterGypsumAsbestos

Soft materialMarbleCementConcreteBlackboardLimestoneGranite

Hard material

REFERENCEQUANTITYQUALITY PROFESSIONAL SERIES PROFESSIONAL SERIES MULTIPURPOSE PROF. MULTIPURPOSE PROF.CONTENTPRICE €

5,615,616,607,278,94

7,277,278,288,94

10,58

30,49 49,86 38,46 62,63

467

L1

D1

CRSDSADCREXT

CRTHCON

PTCWFKIT

CRD1mm

L1mm €

CR12 12,0 100CR14 14,0 100CR16 16,0 100CR18 18,0 100CR20 20,0 100CR25 25,0 100

D1mm €

CR12SSET 12,0CR14SSET 14,0CR16SSET 16,0CR18SSET 18,0CR20SSET 20,0CR25SSET 25,0

Cons

tructi

on dr

ill bit

sGr

ey

CUTTERS FOR DRILLING REBAR IN CONCRETE

ACCESSORIES

DESCRIPTION

SDS PLUS Drive adaptor for rebar cutters240 mm Extension rod for drive adaptorsThread converter(12 & 14 mm cutter only)Water feed pressure pump (including fitting pipe)

REBAR DRILLING SETS

Ref. CREXT

Ref. CRSDSAD

ADVICES FOR USING:• Stop drilling with the SDS PLUS drill when you impact against rebar.• Thread the cutter CR into the drive adaptor CRSDSAD (use the thread converter for Ø 12 and Ø 14 mm) and push the lance from the water feed pressure unit into the fitting from the water feed adaptor.• Put the hammer drill in rotation mode and give pressure at the water pump.• Drill into the rebar at 900 rpm until concrete dust is visible in the water, it means that the rebar has been already cut.• Continue drilling with SDS PLUS drill.

Contents:1 Rebar cutter1 Drive adaptor CRSDSAD1 SDS PLUS Drill1 Fitting pipe1 Extension CREXT

CR DRILL SET

147,1173,34

73,34

88,93

196,17215,80235,42255,04269,76294,28

326,85348,63370,45392,25414,05435,87

468

PVC

L1

L2

D1D2

BC70..BD1 mm

D2 mm

L2 mm

L1 mm €

BC700400B 4 6,0 25 45BC700500B 5 6,0 25 45BC700600B 6 6,0 30 66BC700700B 7 6,0 30 66BC700800B 8 6,0 30 66BC700900B 9 6,0 30 66BC701000B 10 6,0 30 66BC701200B 12 6,5 20 66BC701400B 14 6,5 20 66BC701500B 15 6,5 20 66BC701600B 16 6,5 20 66BC701800B 18 6,5 20 66BC702000B 20 6,5 20 66

Construction drill bitsPink

ELECTRODEPOSITED DIAMOND HOLESAW FOR GLASS

Ref. BC70..B

Diamond

Series

Given the characteristics and small diameter of these holesaws it is important to keep in mind that they do not come with a pilot drill. For portable drilling machi-nes, we highly recommend making an exterior guide (see picture). In stationary machines, both workpiece and the machine should be securely fastened.

Example of exterior guide forworking with portable machines

6,978,479,8911,3012,1113,5014,9218,5323,5727,2130,1433,0535,86

469

BC90BD1mm

D2mm

L1mm €

BC9003B 3,0 2,5 65BC9004B 4,0 3,0 65BC9005B 5,0 4,0 65BC9006B 6,0 4,0 65BC9008B 8,0 6,0 70BC9010B 10,0 8,0 80BC9012B 12,0 10,0 80BC9014B 14,0 10,0 80

BC909325 BC909328 BC9093184 4 5

Ø 4 - 5 - 6 - 8 mm Ø 5 - 6 - 8 - 10 mm Ø 3 - 4 - 5 - 6 - 8 mm

BC909327 BC909434 BC9093195 6 6

Ø 4 - 5 - 6 - 8 -10 mm Ø 4 - 5 - 6 - 8 -10 - 12 mm Ø 3 - 4 - 5 - 6 - 8 - 10 mm

PVCTiN

BW13D1mm

D2mm

L1mm €

BW1303 3,0 2,5 62BW1304 4,0 3,0 65BW1305 5,0 4,0 68BW1306 6,0 4,0 72BW1308 8,0 6,0 80BW1310 10,0 8,0 90BW1312 12,0 10,0 100BW1314 14,0 10,0 100

Ø mm R.P.M. 3 - 6 900 8 - 10 70012 - 14 600

L1

D1D2

L1

D1D2

Cons

tructi

on dr

ill bit

sPin

k

Ref. BC90B

Standard

series

• Fully ground carbide tip.

APPLICATIONS:• Glass, ceramic, tile, porcelain, etc...

GLASS DRILL BIT

Ref. BW13

• 4 teeth sharpening provides high performance drilling in glass.• Fully ground carbide tip.

APPLICATIONS:• Glass, ceramic, tile, porcelain, etc...

GLASS AND TILE DRILL BITS

CUTTING SPEEDR.P.M.

REFERENCEQUANTITYQUALITY STANDARD SERIES STANDARD SERIES STANDARD SERIESCONTENTPRICE €

REFERENCEQUANTITYQUALITY STANDARD SERIES STANDARD SERIES STANDARD SERIESCONTENTPRICE €

Professional

series

26,63 30,43 31,76

33,14 46,19 41,42

5,535,996,366,737,31

10,2214,2416,22

7,478,098,599,089,87

13,8019,2321,90

470

SDSMax

SDSPlus

QFMX SDS-MAX

QFB2 AEG: PH240-PH350-PH26-PH38-PHD38BOSCH GBH7/45DE - UBH12/50

QFV2HEX. 13 mm

HITACHI DH28Y - VRY38 - DH38YBMAKITA HR3820 - HR3850 - 8035NB

QFK2HEX. 14 mm

√ X

GreyConstruction drill bits

ADAPTORS WITH SLOT LOCKING DEVICE FOR FITTING HAMMER DRILL BITS WITH SDS PLUS SHANK

SDS-PLUS EXIT SDS-MAX SHANK

SHANK MACHINE TYPE (SDS-PLUS EXIT IN ALL CASES)

STRAIGHTRIBBED SHANK

PETIT KANGO 501 - 637 - 430C

13 mm Hexagonalshank

14 mm Hexagonalshank

All machines with SDS MAX shank

CLAIM ACCEPTANCE

DYSFUNCTION AT THE POWER CHUCKS SDS PLUS NOTCHES

Trapezoidal noses responsiblefor rotation.

Axial movement of thedrill is correct.

CONCLUSION:THIS RESULTS IN THE DRILL ROTATING WITHOUT CORRECTLY HAMMERING WHICH LEADS TO EXCESSIVEFRICTION AND OVER-HEATING OF THE DRILL BIT.

NON-ACCEPTABLE CLAIM

Steel ball, responsible foraxial fixing.

A worn out trapezoidal does not transmit the rotation movement correctly, thus forcing the ball to transmit rotation as well as axial movement. The ball impacts and forces against the notch, damaging the chuck.

Worn out trapezoidalnose..

Broken trapezoidalnose.

A worn out chuck does not allow acorrect transmission of the axialimpact movement.

DAMAGED POWER TOOL CHUCKPOWER TOOL CHUCK IN GOOD CONDITION

Extreme example

This mechanism was designed to use SDS PLUS Drills, till 18 mm maximum diameter, which are not available with SDS-MAX shank. The lifetime and performance of these adaptors will depend on their adequate use

128,85

128,85

128,85

128,85

471

2-19

6x210 7x210 8x210 9x210 10x210 12x210 14x200 16x200 18x200 20x200 3 3 3 3 3 3 3 2 2 26,5x160 7x160 8x160 9x160 10x160 12x160 14x160 15x160 5x210 5 5 5 5 5 3 3 3 34x110 5x110 6x110 7x110 8x110 10x110 4x160 5x160 5,5x160 6x160 8 8 8 8 8 8 8 8 8 8

SDSPlus

2-20

14x310 16x310 18x300 20x300 10x460 12x450 14x450 16x450 18x450 20x450 2 2 2 2 2 2 2 2 2 26x210 8x210 10x210 12x210 14x210 16x210 18x210 20x200 10x310 12x310 5 5 5 5 5 5 2 2 3 35x110 6x110 8x110 10x110 5x160 6x160 8x160 10x160 12x160 14x160 10 10 10 10 10 10 10 5 5 5

SDSPlus

2-21

14x460 16x450 18x450 20x450 22x450 24x450 25x450 26x450 28x450 30x450 2 2 2 2 2 2 2 2 2 228x250 30x250 8x310 10x310 11x310 12x310 14x310 16x310 18x300 20x300 2 2 2 2 2 2 2 2 2 210x260 12x260 14x260 15x260 20x250 22x250 24x250 25x250 26x250 2 2 2 2 2 2 2 2 2

SDSPlus

Cons

tructi

on dr

ill bit

sGr

ey

PROFESSIONAL HAMMER DRILL BITS SDS PLUS DISPLAYS

W05 RANGE UNTIL 20 x 200 mm. DISPLAY

Composition: W05 drills

Dimensions: width 330 x depth 360 x height 615 mm. Ref. 2-19

W05 RANGE UNTIL 20 x 450 mm. DISPLAY

Composition: W05 drills

Dimensions: width 330 x depth 360 x height 615 mm. Ref. 2-20

W05 RANGE UNTIL 30 x 450 mm. DISPLAY

Composition: W05 drills

Dimensions: width 330 x depth 360 x height 615 mm. Ref. 2-21

1.267,78 €

1.884,46 €

2.997,66 €

472

FL03DLMAX

10x340 12x340 14x340 15x340 16x340 18x340 20x340 2 2 2 2 2 2 222x340 24x320 25x320 26x320 14x540 15x540 16x540 2 2 2 2 2 2 218x540 20x540 22x540 24x520 25x520 26x520 2 2 2 2 2 2

SDSMax

BW99

4x116 5x116 6x116 8x116 10x116 6x166 8x166 5 5 5 5 5 4 410x166 12x166 14x166 16x266 18x266 20x266 20x320 4 4 4 2 2 2 222x320 24x320 24x470 25x470 26x470 2 2 2 2 2 BW99D9358 BW99D9412 BW99D9319 BW99D9320 3 3 3 3

SDSPlus

BW3

3x100 4x100 4x150 5x115 5x150 6x115 6x150 5 5 5 5 5 5 5 8x125 10x150 12x170 14x170 5x200 6x200 8x330 5 5 5 5 5 5 310x330 12x330 BW39318 3 3 5

BW6B

3 4 5 6 8 10 12 14 20 20 30 30 20 20 20 20

BW69318 BW69327 BW69328 BW69319 3 3 3 3

CO1400 CO150 PO1400 PO1280 4 4 4 4 CO2250 CA02250 PO2250 4 4 4

SDSMax

SDSPlus

GreyConstruction drill bits

DISPLAY SHELVING IMPLANTATION FOR INDUSTRIAL SUPPLY AND PROFESSIONAL HARDWARE STORE

HAMMER DRILL BITS DELTAGON SDS MAX IN QUADROPACK

DISPLAY

Composition: Range and quantity per reference

Coffrets

Dimensions: width 1000 x depht 400 x height 2200 mm.

HAMMER DRILL BITS DELTAGON SDS PLUS BLISTER PACKAGING

Composition: Range and quantity per reference

Coffrets

DELTAGON DRILLS BLISTER PACKAGING

Composition: Range and quantity per reference

Coffrets

PROFESSIONAL DRILLS BLISTER PACKAGING

Composition: Range and quantity per reference

POINTS AND CHISELS

Composition: Range and quantity per reference

Ref. FL03

18.509,82 €

473

Cons

tructi

on dr

ill bit

s

CLAIM ACCEPTANCE

Happens when the drill is still being used evenif completely worn. The heat generated canmelt the brazing and loosen the carbide insert.

NON-ACCEPTABLE CLAIM

The metal fatigue has worn out the tip and, ifused beyond this point, can lead to a flutebreach.

NON-ACCEPTABLE CLAIM

Flute rupture caused by insufficient heattreatment (carbide tip is visibly not worn).

ACCEPTABLE CLAIM

Drilling over the flute length causes the dustchannel to clog and the subsequent overloadresults in flute breach.The non-fluted part of the drill shows unusualwear when it should be clear.

NON-ACCEPTABLE CLAIM

Can be due to operator drilling over the useful length or possibly keeping onusing a worn out drill until rupture.

NON-ACCEPTABLE CLAIM

Due to the tip violently impacting very hard bodies like the metal rebar ofreinforced concrete.

NON-ACCEPTABLE CLAIM

The tip crack was caused by the hard material, then drilling continued as it is.

NON-ACCEPTABLE CLAIM

FLUTE RUPTURE

FLUTE RUPTURE

HEAD BREACH

Carbide tip worn out

Carbide tip worn out

Carbide tip in good condition

CARBIDETIPPEDCRACK

CARBIDE TIPBREACH

LOOSECARBIDE TIP

FLUTE RUPTURE

The concrete drill bit may be damaged in the following situations:• Continue working when the tool is worn.• When drilling in improper material.• When drilling deeper than the flute’s length.• When the drill bit is used with an improper machine.

How can I check the wear limit of drill bits?• Check the state and wear level of the carbide tip.• Verify the state of the drill’s flutes.• The drill holder of the power tool is a good indicator of wear.

474

Construction drill bits

CLAIM ACCEPTANCE FOR DELTAGON DRILL BITS

When the tip’s ridge line of the drill bits looks like the picture,it is considered worn out (see left)

NON-ACCEPTABLE CLAIM

The shank part of the drill bit is considered worn out when it is burnt blue.(Usedwith only rotation or used after the tip has worn out). The shank of the drill bitcould turn blue also when drilling on extremely hard material.

NON-ACCEPTABLE CLAIM

If the head shows burnt blue areas, it means the operator has continuedworking with a worn out drill bit. The heat generated has melted the

brazing and caused the carbide insert to loosen.NON-ACCEPTABLE CLAIMHowever, when the tip is detached at the early stage without having theflute turning blue, this claim will be accepted. ACCEPTABLE CLAIM

USUAL LIFE OFDELTAGON BIT

LOOSEDELTAGONCARBIDE TIP

USUAL LIFE OFDELTAGON BIT

worn out

worn out

worn outaccepted

When the tip’s ridge line of the drill bits looks like the picture,it is considered worn out (see left).

When the tip’s ridge line of the drill bits looks like the picture,it is considered worn out (see left).

worn outNew

worn outNew

HOW TO VERIFY IF THE DRILL BIT’S WEAR LEVEL ?