BULLETIN NO. FC3 - FEBRUARY, 1943

No. W.IOI Floor Cabinet is recorn- Ir--~--mended for bench lathes with bedlengths up- to 43 inches. View aboveshows Atlas No. H42 F-Series IO-inchlathe on No. W-IOI floor cabinet.

-MODERN

THE Atlas hardwood floor cabinets provide rigid sup-port for all types of bench machines and haveconvenient covered compartments for tools and at-tachments. Three models are available: Nos. W-I 0 Iand W-102 [above] for bench lathes, screw machines,etc. and No. M 1-750 [over] with 30" x 18" table forsuch tools as shapers, milling machines, and drillpresses.

The Atlas cabinets are patterned after modern heavy-duty scientific laboratory furniture. Massive solid-hardwood construction of all principal parts furnishesthe extra weight and rigidity required for accurate

machine work and smooth, quiet operation. All framejoints are glued, screwed and bolt-reinforced. Tableboard is I%" thick.

There is plenty of covered space for the clean storageof tools and accessories. Nos. W-IOI and W-102have a roomy drawer (7112 inches deep] and a cup-board with pull-down door, 81/4 inches high. No.M 1-750 [over] has one open cupboard and one dooredcupboard. Doors and drawers are flush-front type,and the entire cabinet is round-cornered and natural-finished for modern attractive appearance. Eachcorner has a bored hole for bolting cabinet to floor.

AND CABINETSOrder For Bed Table Overall Code

No. length Dimensions Height Weight Word Price

W-IOI 36" and 42" 45" x 14" 31112" 160 lb. YIBCA $59.95W-102 48'" and 54" 57" x 14" 31112" 186 lb. YIBDE 69.95

FOR SHAPERS, MILLING MACHINES, ETC.

The Atlas No. M 1-750 hardwood floor cabinet is de-signed to furnish firm support for shapers, milling ma-chines, drill presses, and other bench-type machines.The top of the MI-750 cabinet measures 30"x 18".

Details of design are the same as theW-101 and W-102cabinets described on the opposite side of this bulletin-rugged, solid-hardwood construction; bolt-reinforcing;1¥S"-thick table board; modern round-cornered flush-front styling. Two roomy cupboards, each 81/4 incheshigh, provide covered space for the storage of ac-cessories and tools-the right-hand cupboard is open-front, and the one on the left is equipped with a pull-down door with a catch at the horizontal position.

Atlas 7·inch s hap e rmounted 0';' N.o.M I - 750 h a r d woo dfloor cabinet.

Table

SPECIFICATIONS- NO. MI-750 FLOOR CABINETOverallHeight Weight

CodeWord Price

OrderNo. Dimensions

MI-750 !.40 lb. ZEWEP $49.95• .~ .. -r'. ': "'~' ••

30''' X 18" 313 "

FOR ~ MODERN SHOP EQUIPMENT SEE-------'

LATHES ARBOR PRESSES MILLING MACHINISDRILL PRESSES SHAPERS

ATLAS PRESS CO., KALAMAZOO 130, MICHIc:.AN, U. S. A. BULLETIN NO. FC3 - FEBRUARY, 1943