bspt...these fittings meet the requirements of astm d2466 material: dura bspt fittings are made of...
TRANSCRIPT
BSPTFITTINGSDURA PLASTIC
PRODUCTS, INC.P.O.BOX 2097
BEAUMONT, CA 92223
NATIONAL ORDER DESK1-(800)854-2323CALIFORNIA ORDER DESK1-(800)472-8564
TM
3
2
5 7
4 6
DURA WAREHOUSES
PERRY, GAOFFICEFAX
(478) 988-0282(478) 987-7003
FRACKVILLE, PAOFFICEFAX
(570) 874-4651(570) 874-4652
CARROLLTON, TXOFFICEFAXORDERFAX
(972) 406-8996(972) 406-0306
(800) 709-2220
SALT LAKE CITY, UTOFFICEFAX
(801) 973-9442(801) 973-9258
PASCO, WABURLINGTON, IAOFFICEFAX
(509) 547-7272(509) 547-0107
OFFICEFAXTOLLFREE
(319) 758-9060(319) 758-9058
(800) 758-9060
CORPORATEOFFICE (951)845-3161 FAX (951) 845-7644
12
34
5
6
7
8 CELINA,TNOFFICEFAX
(931) 243-5544(931) 243-5542
8
ST
AN
DA
RD
WA
RR
AN
TY
MINIMUM BILLING: Minimum billing requirement is $50.00 net.
RETURNED MERCHANDISE: No merchandise will be accepted for return without authorization. Merchandisemust be returned freight prepaid and will be subject to a 20% handling charge.
TERMS: Invoices are due and payable thirty (30) days from date of invoice. A two (2) percent prompt paymentdiscount on net amount of invoice Excluding Freight will be allowed if paid by the 10th. All orders receivedafter the 25th of the month will be considered as of the 1st of the following month for billing purposes.
FREIGHT: Prepaid on orders for products totaling $1,000.00 net for one shipment to single destination withinthe contiguous United States.
Possession of this price list shall not be construed as an offer to sell the products listed.
Dura Plastic Products, Inc. ( Sellers ) warrants to the original Buyer only, that all products shall
be free from defects in design and manufacture for a period of three years from the date of delivery,
provided that such products are installed, used and/or adjusted only in strict accordance with
the appropriate guidelines.
DO NOT USE OR TEST DURA PRODUCTS WITH COMPRESSED AIR OR GAS. DO NOT USE
DURA PRODUCTS WITH COMPRESSED AIR OR GAS SYSTEMS.
MODIFICATION OF FITTINGS VOIDS WARRANTY. In no event shall the foregoing warranty
extend to any products in any way caused or allowed to be, or installed, operated or used in such
a manner as to be, subject or exposed to conditions of misuse, abuse or accident. The sole
obligation of Seller, and the exclusive remedy of Buyer under this warranty, under any other
warranty, expressed or implied, under any rule of law including strict liability, negligence, indemnity,
or otherwise, is the replacement of the defective goods by Seller, or at Seller s sole election, the
return of the purchase price of the defective goods.
Any products returned by Buyer to Seller under the foregoing terms shall be returned to Seller s
place of business freight prepaid, accompanied or preceded by Buyer s particularized statement
of the claimed defect. The risk of loss and freight charges to and from Seller in connection with
any returned products shall be borne by Buyer, but Seller shall bear such additional freight charges
arising in connection with any such returned products ultimately determined by the Seller to be
defective under the terms of the foregoing warranty.
The agreement of Seller to sell its products is expressly conditioned upon the Buyer s assent to,
and Seller agrees to sell its products upon, all terms and conditions set forth above and on the
face hereof. Buyer s acceptance of any products provided under this sale shall constitute such
assent.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER
WARRANTIES, ESPRESSED OR IMPLIED. NO WARRANTY OF MERCHANTIBILITY, NO IMPLIED
WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, AND NO IMPLIED WARRANTY
ARISING BY USAGE OF TRADE, COURSE OF DEALING OR COURSE OF PERFORMANCE
IS GIVEN BY SELLER OR SHALL ARISE BY OR IN CONNECTION WITH THIS SALE AND/OR
THE SELLER S AND/OR BUYER S CONDUCT IN RELATION THERETO OR TO EACH OTHER,
AND IN NO EVENT SHALL SELLER BE LIABLE FOR ANY SPECIAL INDIRECT, INCIDENTAL
OR CONSEQUENTIAL DAMAGES ARISING IN ANY WAY IN CONNECTION WITH ANY
PRODUCTS OF THE SALE.
These fittings meet the requirements of ASTM D2466
Material: Dura BSPT Fittings are made of PVC Type 1, Grade1.
" "
'
'
'
'
'
' '
CORPORATE OFFICES AND FACTORYPO BOX 2097533 EAST THIRD STREETBEAUMONT, CA 92223(951)845-3161FAX (951)845-7644
1
BSPT
BSPT Fittings
2
·STANDARD WARRANTY 1
·BSPT Fittings 3 - 4
·BSPT Insert Fittings 4
·BSPT Hose Adapters 4
·BSPT Nipples 5
·PVC Insert Specifications 6
British Standard Pipe(Taper Thread)DURA PLASTICPRODUCTS, INC.P.O.BOX 2097533 EAST THIRD STREETBEAUMONT, CA 92223
3
BSPT PVC FITTINGS DURA
PLUG
REDUCERBUSHING
(BSPT)
-7 Denotes Schedule 40 molded in gray.
(BSPT x BSPT)
MALE FITTING
ADAPTER
O 90 STREETELL
REDUCINGMALE
ADAPTER
MALEADAPTER
(BSPT x IPS spg)
(BSPT x BSPT)
(Spg x BSPT)
(BSPT x IPS slip) FLUSH STYLE -2
(BSPT x IPS slip)
FEMALE
ADAPTER
(BSPT x IPS slip)
REDUCINGBUSHING
BS436-072-2 23820 1/2 x 1/4 10 250
BS436-074 23821 1/2 x 3/4 10 250
BS436-075 23822 1/2 x 1 10 100
BS436-098-2 23823 3/4 x 1/4 10 250
BS436-099-2 23824 3/4 x 3/8 10 250
BS436-101 23825 3/4 X 1/2 10 250
BS436-102 23826 3/4 X 1 10 100
BS436-103-2 23827 1 X 1/2 10 250
BS436-131 23828 1 X 3/4 10 200
BS436-131-2 23829 1 X 3/4 10 250
BS436-132 23830 1 X 1 1/4 5 50
BS436-168 23831 1 1/4 X 1 5 100
BS436-168-2 23832 1 1/4 X 1 5 125
BS436-210-2 23833 1 1/2 X 3/4 5 125
BS436-211-2 23834 1 1/2 X 1 5 125
BS436-212 23835 1 1/2 X 1 1/4 5 50
BS436-212-2 23836 1 1/2 X 1 1/4 5 50
BS436-213 23837 1 1/2 X 2 5 50
BS436-251-2 23839 2 X 1 1/2 5 50
BS433-005 23800 1/2 10 250
BS433-007 23801 3/4 10 250
BS433-010 23802 1 10 100
BS433-012 23803 1 1/4 5 50
BS433-015 23804 1 1/2 10 50
BS433-020 23805 2 5 25
BS412-015-7 23846 1 '1/2 5 50
BS412-020-7 23847 2 5 25
BS435-005 23871 1/2 10 250
BS435-007 23872 3/4 10 250
BS435-010 23873 1 10 100
BS435-012 23874 1 1/4 5 50
BS435-015 23875 1 1/2 5 50
BS435-020 23876 2 5 25
BS838-211 40010 1 1/2 X 1 10 100
BS838-212 40011 1 1/2 X 1 1/2 10 100
BS439-211 23854 1 1/2 X 1 5 125
BS436-005 23810 1/2 10 250
BS436-007 23811 3/4 10 250
BS436-010 23812 1 10 100
BS436-012 23813 1 1/4 5 50
BS436-015 23814 1 1/2 5 50
BS436-020 23815 2 5 25
BS436-030 23816 3 - 16
BS450-005 23880 1/2 10 250
BS450-007 23881 3/4 10 500
BS450-010 23882 1 10 250
BS450-012 23883 1 1/4 5 125
BS450-015 23884 1 1/2 5 125
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAGPART
NUMBERUPC
CODESIZE BOXBAG
4
BSPT PVC FITTINGSDURA
(BSPT)
MALEADAPTER
REDUCINGMALE
ADAPTER
(BSPT x insert)
(BSPT x insert)
MALEHOSE
ADAPTER(Hose x BSPT)
MANIFOLDTEE
(IPS slip x IPS spg x BSPT)
MALEADAPTER
PLUG
(BSPT x IPS slip)
O 90 STREET
ELL
(BSPT x BSPT)
BS475-007 23987 3/4 10 50
BS475-010 23992 1 10 50
BS475-131 24008 1 x 1 x 3/4 10 50
BS1436-005 23899 1/2 10 250
BS1436-007 23900 3/4 10 200
BS1436-010 23901 1 10 100
BS1436-012 23902 1 1/4 5 50
BS1436-015 23903 1 1/2 5 50
BS812-010 23862 1 5 50
BS812-012 23863 1 1/4 5 50
BS812-015 23885 1 1/2 5 50
BS1436-072 23904 1/2 X 1/4 10 250
BS1436-074 23905 1/2 X 3/4 10 100
BS1436-075 23906 1/2 X 1 10 100
BS1436-101 23907 3/4 X 1/2 10 250
BS1436-102 23908 3/4 X 1 10 100
BS1436-131 23909 1 X 3/4 10 100
BS1436-132 23910 1 x 1 1/4 5 100
BS1436-133 23911 1 x 1 1/2 5 50
BS1436-167 23912 1 1/4 x 3/4 10 50
BS1436-168 23913 1 1/4 x 1 10 50
BS1436-169 23914 1 1/4 x 1 1/2 5 50
BS1436-211 23915 1 1/2 x 1 10 50
BS1436-212 23916 1 1/2 x 1 1/4 25 5
BS836-015 23889 1 1/2 5 50
BS836-020 23890 2 5 25
BS836-132 23891 1 x 1 1/4 5 125
BS836-133 23892 1 x 1 1/2 5 125
BS836-169 23893 1 1/4 x 1 1/2 5 50
BS850-005 23894 1/2 10 500
BS850-007 23895 3/4 10 500
BS850-010 23896 1 10 250
BS850-012 23897 1 1/4 10 100
BS850-015 23898 1 1/2 10 100
BS503-005 23918 1/2 25 200
BS503-007 23917 3/4 25 200
BS503-010 23919 1 25 200
BS503-012 23920 1 1/4 25 200
BS503-015 23921 1 1/2 25 200
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
5
BSPT PVC FITTINGS DURA
T.B.E.REDUCINGNIPPLES
(BSPT x BSPT)
Indicates Machined Nipples
*BSPT DISCOUNT DOES NOT APPLY TO NIPPLES. USE NIPPLE DISCOUNT.*
BSPT NIPPLES
T.B.E.NIPPLES
(BSPT x BSPT)
1/2"
3/4"
1"
1 1/4"
1 1/2"
NATIONAL ORDER DESK1-(800)-854-2323
CALIFORNIA ORDER DESK1-(800)-472-8564
FACSIMILE TERMINAL(951) 845-7644
BS8303 23942 2 25 100
BS8304 23943 2 1/2 25 75
BS8305 23944 3 25 100
BS8306 23945 3 1/2 25 50
BS8307 23946 4 25 50
BS8311 23947 6 - 40
BS8315 23948 8 - 25
BS8319 23949 10 - 25
BS8323 23950 12 - 25
BS8327 23951 14 - 20
BS8203 23932 2 25 125
BS8204 23933 2 1/2 25 100
BS8205 23934 3 25 100
BS8206 23935 3 1/2 25 75
BS8207 23936 4 25 75
BS8211 23937 6 25 125
BS8215 23938 8 - 25
BS8219 23939 10 - 25
BS8223 23940 12 - 25
BS8227 23941 14 - 25
BS8203-101 23962 3/4 x 1/2 25 250
BS8303-130 23963 1 x 1/2 25 250
BS8303-131 23964 1 x 3/4 25 250
BS8403-166 23965 1 1/4 x 1/2 25 125
BS8403-167 23966 1 1/4 x 3/4 25 125
BS8403-168 23967 1 1/4 x 1 25 125
BS8503-209 23968 1 1/2 x 1/2 25 125
BS8503-210 23969 1 1/2 x 3/4 25 125
BS8503-211 23970 1 1/2 x 1 25 125
BS8503-212 23971 1 1/2 x 1 1/4 25 125
BS8103 23922 2 25 200
BS8104 23923 2 1/2 25 125
BS8105 23924 3 25 125
BS8106 23925 3 1/2 25 125
BS8107 23926 4 25 150
BS8111 23927 6 20 100
BS8115 23928 8 - 50
BS8119 23929 10 - 50
BS8123 23930 12 - 50
BS8127 23931 14 - 50
BS8503 23957 2 - 25
BS8504 23958 2 1/2 - 25
BS8506 23960 3 1/2 - 25
BS8507 23961 4 - 25
BS8403 23952 2 - 25
BS8404 23953 2 1/2 - 25
BS8405 23954 3 - 25
BS8406 23955 3 1/2 - 25
BS8407 23956 4 - 25
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
PARTNUMBER
UPCCODE
SIZE BOXBAG
BSPT PVC FITTINGSDURA
6
SPECIFICATIONS FOR PVC INSERT FITTINGS
RECOMMENDED INSTALLATION
NOM-INALPIPE SIZE
BARBS
NO.
min.
OUTSIDE DIAMETER Zmax. min.
DEPTH
V min.Y min.
WALLTHICKNESS
F min.
INSIDEDIAMETER
D min.LENGTH
INCH INCH INCHINCH INCHINCH INCHMM MM MMMM MMMM MM
INSERTLENGTH
P min.
THE RIGHT WAYTO CLAMPPOLYETHYLENE PIPEIS ON THE BARBS ASSHOWN.
1/2 1 1/4 32 3/4 20 0.665 16.89 0.635 16.13 4 0.015 0.38 0.080 2.03 0.406 10.31
3/4 1 1/4 32 3/4 20 0.865 21.97 0.835 21.21 4 0.015 0.38 0.085 2.16 0.562 14.27
1 1 1/4 32 3/4 20 1.095 27.81 1.065 27.05 4 0.020 0.51 0.100 2.54 0.750 19.00
1 1/4 1 1/4 32 3/4 20 1.425 36.20 1.395 35.43 4 0.025 0.64 0.110 2.80 0.995 25.27
1 1/2 1 1/2 38 3/4 20 1.665 42.29 1.630 41.40 4 0.030 0.76 0.110 2.80 1.125 28.58
2 1 1/2 38 3/4 20 2.125 53.98 2.085 52.96 4 0.030 0.76 0.110 2.80 1.656 42.06
2 1/2 2 50 1 25 2.520 64.00 2.487 63.17 4 0.030 0.76 0.120 3.05 2.062 52.00
3 2 1/8 54 1 1/8 29 3.125 79.38 3.086 78.38 4 0.030 0.76 0.125 3.18 2.600 66.00
4 3 76 1 1/4 32 4.090 103.89 4.044 102.72 4 0.030 0.76 0.130 3.30 3.525 89.54
BSPTFITTINGSDURA PLASTIC
PRODUCTS, INC.P.O.BOX 2097
BEAUMONT, CA 92223
NATIONAL ORDER DESK1-(800)854-2323CALIFORNIA ORDER DESK1-(800)472-8564
TM
3
2
5 7
4 6
DURA WAREHOUSES
PERRY, GAOFFICEFAX
(478) 988-0282(478) 987-7003
FRACKVILLE, PAOFFICEFAX
(570) 874-4651(570) 874-4652
CARROLLTON, TXOFFICEFAXORDERFAX
(972) 406-8996(972) 406-0306
(800) 709-2220
SALT LAKE CITY, UTOFFICEFAX
(801) 973-9442(801) 973-9258
PASCO, WABURLINGTON, IAOFFICEFAX
(509) 547-7272(509) 547-0107
OFFICEFAXTOLLFREE
(319) 758-9060(319) 758-9058
(800) 758-9060
CORPORATEOFFICE (951)845-3161 FAX (951) 845-7644
12
34
5
6
7
8 CELINA,TNOFFICEFAX
(931) 243-5544(931) 243-5542
8