11

Sales reference 03939040 03939041 03939042 03939043 03939240 03939241 03939242 03939243Fine adjustments – – – –Size 454 454 454 454 474 474 474 474Displacements Manual Manual Manual Manual Manual Manual Manual Manual

Probing systemsTESASTAR – – – –TESASTAR-i* – – – –

MachinesDimensions ( X x Y x Z, mm) 970 x 930 x 1620 970 x 1130 x 1660Measurement volume (X x Y x Z, mm) 460 x 510 x 420 460 x 710 x 420

WeightNet / gross [kg] 210 / 300 315 / 445Max. load [kg] 227 200

Precision**MPEE (µm) (L in mm) 3 + 4L/1000 3 + 4L/1000MPEP (µm) 3 3

Other specificationsPower supply 115 ÷ 230 VAC ±10%, 50 ÷ 60 Hz 115 ÷ 230 VAC ±10%, 50 ÷ 60 HzAir supply pressure (bar) 3,9 3,9Consumption (NI/min.) 60 60Rated temperature 20°C ± 0,5°C 20°C ± 0,5°C

Operating limits (temp.) 13°C ÷ 35°C 13°C ÷ 35°C

* The machine is also available with an indexable TESASTAR-iM8 probe head. For more information, please contact your local agent.** Precise measurements are obtained using a ruby ball stylus: diameter 2 mm, length 21 mm, temperature 20°±0,5°C.

> TESA Micro-Hite 3D

•Manuel coordinate-measuring machine with mobile gantry

•Guidance on 22 aerostatic skates

•Granite measuring table

•X axis in Δ

•With or without precise adjustment

•TESA-REFLEX MH3D software

•TESA encoder system

MH3D 454

MH3D 474

66

The software’s compatibility with Micro-Hite 3D makes it a versatile machine that is accessible to all, whether in a laboratory or workshop. The machine’s bi-modularity is an important factor for productivity. It helps to increase the effective system usage time and consequently the overall efficiency of a production chain.

The hybrid nature of the machine provides a welcome flexibility by offering an adjustable and complete measure-ment solution for product batches, from prototyping to large production runs.

> TESA-rEFLEX Dual

Two measurement modes in one machine

• Displacement motorised

• Programme reminderautomatic

• Programme creationprogramming

> Automatic CMM

> Manual CMM

> MH3D DUAL

• Displacement manual

• Programme remindermanual

• Programme creation learning

•Displacement manualormotorised

•Programme remindermanuelormotorised

•Programme creation learning

12

> TESA Micro-Hite 3D Dual•Manual coordinate-measuring

machine with mobile gantry

•Guidance on 22 aerostatic skates

•Granite measuring table

•X axis in Δ

•TESA-REFLEX MH3D software

•Manual measurement mode included

•Automatic measurements

•TESA encoder system

•TESA controller

Sales reference 03939267 03939268 03939269Size 454 454 454Displacement Manual, motorised, automated

Probing systemsTESASTAR – –TESASTAR-i – –TESASTAR-i M8 – –

MachinesDimensions ( X x Y x Z, mm) 1030 x 1100 x 1680Measurement volume ( X x Y x Z, mm) 440 x 490 x 390Servo-motors on all 3 axesJoystick Optional

WeightNet / gross [kg] 225 / 350Max. load [kg] 227

Precision*MPEE µm (L in mm)– Manual mode– Motorised mode

3 + 4L/10002,5 + 3,9L/1000

MPEP (µm) 3RO, MPL (µm) 2

Other specificationsSpeed XYZ (mm/s) 200Acceleration XYZ (mm/s2) 1000Power supply 115 ÷ 230 VAC ±10%, 50 ÷ 60 Hz

Air supply pressure [bar] 3,9

Consumption (NI/min.) 60

Rated temperature 20°C ± 0,5°C

Operating limits (temp.) 13°C ÷ 35°C

* Precise measurements using a ruby ball stylus: diameter 2 mm, length 21 mm, temperature 20°±0,5°C.

13

> configurations

Sales reference03

9390

40

0393

9041

0393

9042

0393

9043

0393

9240

0393

9241

0393

9242

0393

9243

0393

9267

0393

9268

0393

9269

MachineChassis MH3D MH3D MH3D DualSize 454 454 454 454 474 474 474 474 454 454 454Granite tableFine adjustment – – – – – – –Calibration sphereAir and oil filterSupport / Base Optional OptionalJoystick – – – – – – – – Optional

TESA-REFLEX ConsoleTESA-REFLEX MH3D – – –TESA-REFLEX Dual – – – – – – – –1x TESA-REFLEX Console1x TESA Flash Drive1x TESA Controller – – – – – – – –

Probing systems1x TESASTAR – – – – – –1x TESASTAR-i – – – – – –1x TESASTAR-iM8** – – – – – – – – – –

ProbeIntegrated in probing system –1x Corps de TESASTAR-mp – – – – – – – – – –1x TESASTAR-mp SF (Standard Force) – – – – – – – – – –

Styluses1x rigid probe, ball diameter 6.35 mm***1x ruby ball stylus, diameter 2 mm1x ruby ball stylus, diameter 3 mm1x ruby ball stylus, diameter 4 mm1x brace, 5 directions1x extension, length 10 mm1x extension, length 20 mm

Other1 year warrantyMaintenance contract**** On request On request On request

* The TESA controller is directly integrated into the TESA-REFLEX tablet** MH3D 454 and 474 type machines are also available with an indexable TESASTAR-i M8 probe head. For more information, please contact your local agent.*** Most often used for scanning a measurement part (alongside ReflexScan software for coordinate-measuring machines)**** Contact your local dealer

8

TESA-rEFLEX MH3D TESA-rEFLEX DUAL

Main data pointsCreate programme via learning

Automatic recognition of elements

Simplified alignment process (A-B-C)

Final summary of the measured part (Go-NoGo)

Palettisation –

Management of peripheral devicesUSB flash drive

USB printer

Data managementPrinting– Logo management– Management of the part imageUSB flash drive– Save results in *.txt format– Save results in *pdf format– Send measurement values in series

Additional softwareScan and recover a point cloud

Format and send data to a third-party application

Statistical data management

> capacity

10

The flexibility provided by the compatibility between the TESA coordinate-measuring machine and the wide range of accessories in the TESASTAR range helps to better adapt the proposed solutions to the actual user applications and guarantee that they could be adapted in accordance with user needs.

TESASTAr TESASTAr-p

TESASTAr-i TESASTAr-mp

TESASTAr-i M8 TESASTAr-rp

An appropriate solution for each application

A tablet designed to be robust and reliableWorkshops or production areas are hostile environments for any electronic

system. The main reasons for equipment failure include dust or oil particles that are permanently in suspension in the air.

For this reason, the TESA-REFLEX tablet, with embedded computer, was specially designed to meet the reliability and product life requirements

for this type of usage. Its robustness makes it a tool suited to difficult environments.

Manual probe heads Probes Styluses

– Adjustable, contact activation

– Unidirectional swivel

– 4 choice modules according to the activation force

– 5-direction probe – M8 thread

– Adjustable, contact activation

– 168 positions – 15°steps

– 4 choice modules according to the activation force

– 5-direction probe – Magnetic clamp – M8 thread

– M8 probe clamp – 168 positions, – 15° steps

– Robust probe for long stylus extensions

– M8 thread

Download more information about the ranch of TESASTAR

14

> Accessories

Most measurement processes, along with the use of coordinate-measuring machines, require a clamp system to hold the part properly in place. This clamping kit is perfect for quickly locking any prototype or part in place by using inserts integrated directly into the granite measuring table.

The complexity of the fabrication parts increasingly requires the use of a simple clamping systems in order to protect the probing operations from any hindrance. Such a clamping device must be discreet but must also be as flexible as possible to allow the sensors to access the measurement space in optimal conditions but also to guarantee a clamping solution for all types of measuring parts.

This kit makes it easy to convert any 3D TESA machine into a profile projector! There is no need to own two separate machines to take readings of certain features that are impossible to measure in a tactile way, such as engravings or small parts.

The joystick used alongside MH3D Dual enables a stable dis-placement speed and thus improved measurement precision. It is also a way to easily access the measurement of small geometric elements. The general functions needed for learning a programme are directly accessible from the joystick for ease of use.

‘Basic’ clamping kit

‘Advanced’ fixation kit

camera kit

Joystick(only for MH3D Dual)

15

> Accessories

Product number Name Description

Probing system 03939020 TESASTAR Adjustable probing system, single position03939030 TESASTAR-i Indexable probing system, 168 positions03939031 TESASTAR-i M8 Indexable probing system, M8 clamp

Probe and camera03939070 TESASTAR-p LF Low Force03939071 TESASTAR-p SF Standard Force03939072 TESASTAR-p MF Medium Force03939073 TESASTAR-p EF Extended Force03939170 TESASTAR-mp LF Full magnetic probe module, Low Force03939171 TESASTAR-mp SF Full magnetic probe module, Standard Force03939172 TESASTAR-mp MF Full magnetic probe module, Medium Force03939173 TESASTAR-mp EF Full magnetic probe module, Extended Force03939174 TESASTAR-mp Body Magnetic probe body03939216 Kit TESASTAR-mp (1x body + 1x LF) Magnetic probe kit03939217 Kit TESASTAR-mp (1x body + 1x SF) Magnetic probe kit03939218 Kit TESASTAR-mp (1x body + 1x MF) Magnetic probe kit03939219 Kit TESASTAR-mp (1x body + 1x EF) Magnetic probe kit03939350 TESASTAR-rp Robust probe for longer styluses03969047 Rigid steel probe, dia. 6,35 mm Fixed probe for scanningS39040072 Camera kit with screen Option for converting MH3D into optical

measurement system.S39040070 Camera kit without screen

Connectors and additional software 03969009 ReflexScan Scan data retrieval software04981001 TESA DATA-Direct Data retrieval and usage software04981002 TESA STAT-Express Software for statistical processing and creation of

automatic protocols03969007 RS232 connector cable Used to connect a TESA-REFLEX console to a computer04761063 USB series adapter –

Clamping system03969010 Basic clamping kit –03969504 Advanced clamping kit: «Bronze» 46 components + plate03969505 Advanced clamping kit: «Silver» 66 components + plate03969506 Advanced clamping kit: «Gold» 93 components + plate03969507 Kit of «Bronze» components Kits contain components only, no plate03969508 Kit of «Silver» components Kits contain components only, no plate

03969509 Kit of «Gold» components Kits contain components only, no plate03969510 Threaded clamping plate, 400x400 mm –

Miscellaneous03969003 Protective case Can be used for all CMMs TESA03960172 Air dryer –03960175 Air economizer Shuts off air to the machine if not used for a preset duration03969001 Machine stand (with drawers) 1x document drawer + 1x printer drawer03960270 Machine stand –H005471 Joystick Only for MH3D DualS39900072 USB printer –03969011 Calibration sphere (without certification) –03969511 Calibration sphere (with certification) –03969103 Diaclean, 1L bottle Cleaning fluid for granite table82-1631 TESA test piece –03969095 Hexagon Metrology test piece –