ß hommel hercules tool assortment (60 pcs.)...1 reversible ratchet, 275 mm, 1 handle with sliding...

59.1ENG/OP

ß Hommel Hercules

ß Note:Suitable toolholder assort-ments (see cat.-no. 82479)and tool cabinets (see cat.-no.82551) not included.

Set- 51660 …Contents

60-part 201

Ç 51660

Set contentsÇ 19 hexagonal socket wrench bits, size 10 - 32 mm,

1 reversible ratchet, 275 mm,1 handle with sliding piece, 300 mm,1 universal joint,2 extensions, 125 / 250 mm,11 double open end wrenches, size 6 - 32 mm,9 double open end wrenches, size 6 - 23 mm,4 screwdrivers for slotted screws,

0,4 x 2,5 x 50 / 0,6 x 3,5 x 125 /0,8 x 4 x 100 / 1 x 5,5 x 100 mm,

4 Phillips recess screwdrivers, PH 1 / 2, PZ 1 / 2,1 machinist’s hammer, 500 g,1 plastic hammer, Ø 32 mm,1 drift punch, Ø 2 mm,1 flat chisel, blade width 18 mm,1 cape chisel, blade width 6,5 mm,1 combination plier, 180 mm,1 waterpump plier, 240 mm,1 diagonal cutting plier, 145 mm.

51660 Tool Assortment (60 pcs.)



74-part 101

51661ß Note:Suitable toolholder assort-ments (see cat.-no. 82479)and tool cabinets (see cat.-no.82551) not included.

Set contents1 adjustable wrench, for size - 27 mm,21 combination wrenches, size 6 - 32 mm,1 tyre lever, 500 mm,8 hexagonal ball head socket keys, size 2 - 10 mm,4 screwdrivers, 0,6 x 3,5 x 100 /

0,8 x 4,5 x 90 / 1,0 x 5,5 x 100 / 1,2 x 7 x 125 mm,2 Phillips recess screwdrivers, PH 1 / 2,1 machinist’s hammer, 500 g,1 soft face hammer, Ø 40 mm,1 centre punch, Ø 4 mm,2 drift punches, Ø 2 / 3 mm,3 flat chisels, blade width 18 / 18 / 24 mm,1 cape chisel, blade width 5,5 mm,1 combination plier, 180 mm,1 flat round-nosed plier, 160 mm,1 waterpump plier, 240 mm,1 diagonal cutting plier, 145 mm,1 pocket slide caliper, 150 mm,1 scriber,1 flat steel square with stop, 100 x 70 mm,1 wooden folding rule, 2 m,1 pocket tape rule, 5 m,1 rule, 300 mm,1 hacksaw with 10 hacksawblades, 24 teeth,4 files, 250 mm, H2 (flat, halfround, round, three-square),1 Ideal plate shears, 240 mm,1 three-square scraper, 250 mm,1 pair of nylon safety glasses.

59.2 ENG/OP

H a n d T o o l s

55

51662


93-part 201

Tool Assortment (93 pcs.)

ß Note:Suitable toolholder assort-ments (see cat.-no. 82479)and tool cabinets (see cat.-no.82551) not included.

Set contents

Ñ 13 hexagonal socket wrench bits, size 4 - 14 mm,1 reversible ratchet, 145 mm, 1 handle with sliding piece, 125 mm,1 handle with plastic grip, 150 mm, 1 universal joint,3 extensions, 50 / 100 / 150 mm, 5 sockets for inner-6-point head cap screws, size 3 / 4 / 5 / 6 / 8 mm,3 sockets with blade for slotted screws, 4 / 5,5 / 6,5 mm,3 sockets with blade for Phillips recess screws, PH 1 / 2 / 3,9 double open end wrenches, size 6 - 23 mm,8 6-point socket keys, size 2 - 10 mm,1 jeweller’s screwdriver with 4 blades,4 screwdrivers for slotted screws, 0,6 x 3,5 x 75 /

0,8 x 4,5 x 90 /1,0 x 5,5 x 100 / 1,2 x 7 x 125 mm,2 Phillips recess screwdrivers, PH 1 / 2,1 offset screwdrivers, 4 x 4 mm,1 hand vice, 130 mm,2 machinist’s hammers, 200 / 500 g,1 centre punch, Ø 4 mm,

8 drive pin punches with guide sleeve, 0,9 - 5,9 mm,1 flat chisel, blade width 18 mm,1 combination plier, 160 mm,1 flat round-nosed plier, 160 mm,1 long-nose flat plier, 160 mm,1 waterpump plier, 240 mm,1 diagonal cutting plier, 160 mm,1 pocket slide caliper, 150 mm,1 pocket tape rule, 5 m,1 junior hacksaw, 146 mm,4 files, 250 mm, H2 (flat, halfround, round, three-square),6 die sinker’s files, 100 mm, H2 (flat, flat point,

halfround, round, three-square, square),1 file card, 115 x 40 mm,1 precision tweezer, 130 mm,1 awl,1 Ideal plate shears, 240 mm,1 tool maker’s scraper, 80 mm,1 oiler, 60 ml.

Ñ 51662

59.3ENG/OP

ß Hommel Hercules

Set- 51663 …Contents129-part 101

ÑÇ 51663

Set contents

Ñ 13 hexagonal socket wrench bits, size 4 - 14 mm,1 reversible ratchet, 145 mm, 1 handle with sliding piece, 125 mm,1 handle with plastic grip, 150 mm,1 universal joint, 3 extensions, 50 / 100 / 150 mm, 5 sockets for inner-6-point head cap screws, size 3 / 4 / 5 / 6 / 8 mm,3 sockets with blade for slotted screws, 4 / 5,5 / 6,5 mm,3 sockets with blade for Phillips recess screws, PH 1 / 2 / 3,

Ç 19 hexagonal socket wrench bits, size 10 - 32 mm,1 reversible ratchet, 300 mm,1 handle with sliding piece, 300 mm,1 universal joint,2 extensions, 125 / 250 mm,ea. 1 pce. adjustable wrench, for size up to 20 and up to 30 mm,11 double open end wrenches, size 6 - 32 mm,12 double open end wrenches, size 6 - 32 mm,7 screwdrivers for slotted screws, 0,4 x 2,5 x 50 /

0,5 x 3 x 80 / 0,6 x 3,5 x 125 / 0,8 x 4 x 100 /1 x 5,5 x 100 / 1,2 x 7 x 125 / 1,6 x 10 x 175 mm,

5 Phillips recess screwdrivers, PH 1 / 2 / 3, PZ 1 / 2,1 machinist’s hammer, 500 g,1 plastic hammer, Ø 32 mm,1 centre punch, Ø 4 mm, 2 drift punches, 2 / 3 mm,1 flat chisel, blade width 18 mm,1 cape chisel, blade width 5,5 mm,1 combination plier, 180 mm,1 waterpump plier, 240 mm,1 high-leverage diagonal cutting plier, 160 mm,1 diagonal cutting plier, 145 mm,1 pocket tape rule, 3 m,1 junior hacksaw with 12 hacksawblades, 32 teeth,1 hacksaw with 10 hacksawblades, 24 teeth.

51663

ßNote:Suitable toolholder assort-ments (see cat.-no. 82479)

and tool cabinets (see cat.-no.82551) not included.



Ç 51664


Set contents

Ç 19 hexagonal socket wrench bits, size 10 - 32 mm,1 reversible ratchet, 275 mm, 1 handle with sliding piece, 300 mm,1 universal joint, 2 extensions, 125 / 250 mm,4 sockets for inner 6-point head cap screws, size 5 / 6 / 8 / 10 mm,1 adjustable wrench, for size up to 27 mm,11 double open end wrenches, size 6 - 32 mm,21 combination wrenches, size 6 - 32 mm,12 double open end wrenches, size 6 - 32 mm,1 tyre lever, 400 mm,8 hexagonal socket keys, size 2 / 2,5 / 3 / 4 / 5 / 6 / 8 / 10 mm,5 screwdrivers, 0,8 x 4,5 x 90 / 1 x 5,5 x 100 /

1,2 x 7 x 125 / 1,6 x 10 x 175 / 2,5 x 14 x 250 mm,4 Phillips recess screwdrivers, PH 1 / 2, PZ 1 / 2,1 machinist’s hammer, 500 g,1 soft face hammer, Ø 35 mm,1 centre punch, Ø 4 mm,4 drive pin punches, Ø 3 / 4 / 5 / 6 mm,2 flat chisels, blade width 18 / 24 mm,1 combination plier, 180 mm,1 internal snap ring plier, borehole Ø 19-60 mm,1 external snap ring plier, for shaft Ø 19-60 mm,1 waterpump plier, 240 mm,1 diagonal cutting plier, 145 mm,1 pocket tape rule, 3 m,1 junior hacksaw with 12 hacksawblades, 32 teeth,1 hacksaw with 10 hacksawblades, 24 teeth,4 files, 200 mm, H2 (flat, halfround, round, three-square),1 wire scratch brush, 4-rows, 1 three-square scraper, 250 mm,1 oiler, 250 ml, 1 pair of nylon safety glasses.

ßNote:Suitable toolholderassortments (see cat.-no.

82479) and tool cabinets (seecat.-no. 82551) not included.

59.4 ENG/OP

H a n d T o o l s

55

ß Type In bag made of grainedcowhide.

Contents 61000 …72-part

in leather bag 102

Contents Size1 junior hacksaw with universal sawblade 255 mm,1 drill saw 5 x 270 mm,1 bevelled edge chisel 10 mm,1 saw rasp 320 mm,1 flat file cut 2 with handle 150 mm,1 round file cut 2 with handle 150 mm,1 multi-purpose scissor, straight 190 mm,1 wire scratch brush 4 rows,1 wall scraper 50 mm,1 plaster bowl,1 flat stone chisel 250 mm,1 pointed stone chisel 250 mm,1 electrician’s stone chisel 14 x 250 mm,1 centre punch 120 x 10 mm,1 machinist’s hammer 500 g,1 double face blacksmith’s hammer 1,25 kg,1 rabitz pincer 250 mm,1 combination plier 180 mm,1 radio plier 160 mm,1 waterpump plier 240 mm,1 angled pipe tong 1 inch,3 screwdrivers 4 x 100, 5 x 100, 7 x 150 mm,2 Phillips screwdrivers PH 1 and 2,1 voltage tester 150-250 V,1 cable stripping knife, folding type with 1 blade,1 pocket tape measure 2 m,1 wooden folding rule 2 m,1 aluminium spirit level 400 mm,8 carbide-tipped masonry drills, 2 pce. ea. Ø mm 5, 6, 8, 10,19 twist drills HSS, 0,5 mm steps 1-10 mm,1 twist drill index box,2 ring wrenches size 13 x 17, 19 x 24 mm,3 double-ended spanners size 8 x 10, 13 x 17, 19 x 24 mm,8 allen keys in box 2-10 mm.

61000 Universal Tool Assortment (72 pcs.)

61000

Contents Size1 angled pipe tongs curved nose 1.1/2 inch / 420 mm,1 waterpump plier 240 mm,1 combination pliers DIN 5244 180 mm,1 carpenter’s pincers DIN 5241 210 mm,1 strap pipe wrench 23 x 500 mm,1 armature wrench 65 x 275 mm,1 tube cutter up to 42 mm Ø,1 basin wrench size 30 x 235 mm,1 sanitary wrench size 17 x 10, M10,1 sanitar cross wrench 3/8-1 inch, M8 - M12,1 radiator valve wrench with ratchet 3/8-1 inch,1 inside tube pliers 12-28/ 230 mm,1 tube cutter up to 35 mm Ø,1 tap seat reamers, set 3/8-1 inch,1 drain cleaner 130 mm,1 cat tong trowel 45/160 mm,1 wall scraper, 50 mm,1 plaster bowl,1 round brush 30 mm,1 junior hacksaw,1 engineers’s file flat H 1 250 mm,1 file handle, beechwood 130 mm,1 hand wire brush 4-rows V2A-steel wire,1 allen key set, 7-part in folding holder size 2,5 - 10 mm,1 pce. ea. workshop screwdriver mm 0,5 x 3,0 x 80 / 0,8 x 5,0 x 100 /1,0 x 6,0 x

125 / 1,2 x 7,0 x 150,1 pce. ea. Phillips screwdriver PH 1 and 2,1 three-square hollow scraper 200 mm,1machinist’s hammer, with hickory handle 500 g.1 double face blacksmith’s hammer with ashwood handle 1,25 kg,1 punch 12 x 120 mm,1 pointed stone chisel 400 mm,1 flat stone chisel 300 mm,1 metal shears, right side cutting 300 mm,1 wooden folding rule 2 m.

ßTypeIn sturdy tool bag made ofgrained cowhide.

ApplicationFor general maintenancework in heaters, air condition-ers, sanitary and installation


in leather bag 101

61001

61001 Plumber’s Tool Assortment (38 pcs.)

59.5ENG/OP

ß Hommel Hercules

Electrician’s Tool Assortment (42 pcs.)

ßTypeIn bag made of grainedcowhide with 42 essentialhigh-quality tools for electricalinstallation. All VDE- tools in-dividually tested in compli-ance with VDE0680/T201,IEC900.


in leather bag 101

jeN 62446

Contents Size1 VDE combination plier 180 mm,1 VDE round-nose plier 160 mm,1 VDE telephone plier 200 mm,1 VDE diagonal cutting plier 160 mm,1 VDE cable shear 230 mm,1 VDE wire stripper 160 mm,1 all-purpose plier 250 mm

with PVC-coated non-slip handles,1 electronic diagonal cutting plier 125 mm,1 cable stripping knife, folding type, 1 blade and 2 scrapers,1 Jokari cable stripping knife,1 multi-purpose scissor, straight,1 plastic folding rule, 2 m,1 pointed stone chisel 250 mm,1 flat stone chisel 250 mm,

Contents Size5 VDE hexagonal socket wrenches size 5, 6, 7, 8, 10 mm,8 allen keys on ring 2-10 mm,6 VDE screwdrivers Q 2,5 x 75 / 3,5 x 100,

Q 4 x 100 / 5,5 x 100,W 1 and 2,

1 VDE voltage tester 12 - 750 V,1 electronic screwdriver Q 3 x 350 mm,2 angled screw drivers Q size 5,5,

with hand guard W 1 and 2,1 machinist’s hammer 500 g,1 double face blacksmith’s hammer 1,25 kg,1 electrician’s stone chisel 14 x 250 mm,1 Puk junior hacksaw, adjustable,with universal sawblade,1 aluminium spirit level 400 mm.

62446

Electrician’s Assembly Tool Case (26 pcs.)

ßTypeBag made of cowhide, black,aluminium-reinforced frame,fold-out front wall, carryinghandle, quick-action locks,

bottom studs, fixing rings, -bottom tray made of sheetsteel, galvanized, front bag,toolholder on front and backside. With 26 essential high-quality tools for electrical in-

stallation. All VDE- tools indi-vidually tested in compliancewith VDE0680/T201, IEC 900.


in leather bag 101

jeN 62470

Contents Size1 combination plier with ergosoft-handles 160 mm,1 radio plier,

angled nose, with ergosoft-handles 160 mm,1 diagonal cutting plier with ergosoft-handles 160 mm,1 wire stripper with ergosoft-handles 160 mm,1 VDE cable stripping knife, straight,1 machinist’s hammer 300 g,1 double face blacksmith’s hammer 1 kg,1 electrician’s stone chisel 10 x 8 x 250 mm,1 flat stone chisel 300 mm,1 junior hacksaw PUK

with universal sawblade,1 plaster bowl made of rubber,1 wooden folding rule, 2 m,1 flat brush width 35 mm,1 wall scraper width 40 mm,6 VDE screwdrivers Q 2,5 x 80 / 3,5 x 100 / 4 x 100 / 5,5 x 125 mm,

W PH 1 und 2,6 screwdrivers Q voltage tester 3 x 146 mm, 150 - 250 V,

Q 4 x 100 / 5 x 100 / 7 x 150 mm,W PH 1 und 2. voltage tester 3 x 146 mm, 150 - 250 V,Q 4 x 100 / 5 x 100 / 7 x 150 mm,W PH 1 and 2.

62470

59.6 ENG/OP

H a n d T o o l s

55

h


Set contents

Ñ 13 hexagonal socket wrench bits, size 4 - 14 mm,1 reversible ratchet, 115 mm,1 handle with joint, 143 mm,1 T-handle, 115 mm, 1 handle grip, 134 mm,2 extensions, 55 / 147 mm, 1 universal joint,

Ç 19 hexagonal socket wrench bits, size 10 - 34 mm,1 reversible ratchet, 275 mm,2 extensions, 123 / 248 mm,1 T-handle, 298 mm, 1 universal joint,2 adjustable wrenches, up to 18 resp. 28 mm,10 double open end wrenches, size 6 - 32 mm,10 double open end wrenches, size 6 - 32 mm,7 screwdrivers for slotted screws, 0,4 x 2,5 x 75 /

0,5 x 3 x 80 / 0,6 x 3,5 x 100 / 0,8 x 4 x 100 /1 x 5,5 x 100 / 1,2 x 8 x 150 / 1,6 x 10 x 175 mm,

5 Phillips recess screwdrivers, PH 1 / 2 / 3, PZ 1 / 2,1 machinist’s hammer, 500 g,1 soft face hammer, Ø 35 mm,2 flat chisels, blade width 18 / 24 mm,1 cape chisel, blade width 6 mm,2 drift punches, Ø 2 / 4 mm,1 centre punch, shank Ø 12 mm,3 all-purpose pliers, 180 / 260 / 310 mm,1 flat round-nosed plier, 200 mm,1 diagonal cutting plier, 170 mm,1 end cutter, 165 mm,1 metal hacksaw, incl. 1 sawblade, 300 mm,1 junior metal hacksaw, incl. 1 sawblade, 150 mm,1 tape rule, 2 m.


95-part 101

ÑÇ/ 51677

51677

h Note: Suitable tool cabinet and toolfixtures see cat.-no. 51683-51684.


Set contents

Ñ 10 hexagonal socket wrench bits, size 4 - 11 mm,1 reversible ratchet, 115 mm,2 extensions, 55 / 147 mm, 1 universal joint,

Ç 20 hexagonal socket wrench bits, size 10 - 32 mm,1 reversible ratchet, 275 mm, 2 extensions, 123 / 248 mm,1 T-handle, 298 mm, 1 universal joint,4 hexagonal sockets with bit for screws, size 5 / 6 / 8 / 10 mm,11 double open end wrenches, size 6 - 32 mm,17 combination wrenches, size 6 - 24 mm,7 inner-6-point socket keys, size 2 - 8 mm (set on ring),7 TORX®-socket keys, T 8 - 40 (set on ring)4 workshop screwdrivers,

0,8 x 4 x 100 / 1 x 5,5 x 125 / 1,2 x 8 x 150 / 1,6 x 10 x 175 mm,4 Phillips recess screwdrivers, PH 1 / 2, PZ 1 / 2,1 machinist’s hammer, 500 g,1 soft face hammer, Ø 35 mm,2 flat chisels, blade width 18 / 24 mm,4 drive pin punches, Ø 3 / 4 / 5 / 6 mm, 1 centre punch, shank Ø 10 mm,3 all-purpose pliers, 180 / 260 / 310 mm,1 diagonal cutting plier, 160 mm, 1 flat round-nosed plier, 163 mm,1 internal snap plier, straight, for borehole Ø 19-60 mm,1 external snap plier, straight, for shaft Ø 19-60 mm,1 tape rule, 2 m,1 metal hacksaw, incl. 1 sawblade, 300 mm,1 junior metal hacksaw, incl. 1 sawblade, 150 mm,

each 1 pce. round file, flat file, three-square file 200 mm, cut no. 2,1 flat scraper, blade width 23 mm. Set- 51679 …

Contents116-part 101

ÑÇ/ 51679

51679

59.7ENG/OP

ß Hommel Hercules


hSet contents

Ñ 11 hexagonal socket wrench bits, size 4 - 14 mm,5 hexagonal sockets with bit for screws, size 3 / 4 / 5 / 6 / 8 mm,4 sockets with blade for slotted screws,

0,6 x 3,5 / 0,8 x 4 / 1 x 5,5 / 1,2 x 8 mm,7 sockets with blade for Phillips recess screws, PH 1 - 4, PZ 1 - 3,1 reversible ratchet, 115 mm, 2 extensions, 55 / 147 mm,1 T-handle 115 mm, 1 handle 134 mm, 1 universal joint,

Ç 20 hexagonal socket wrench bits, size 10 - 32 mm,1 reversible ratchet, 275 mm, 2 extensions, 123 / 248 mm,1 T-handle, 298 mm, 1 universal joint,1 torque wrench, 40-200 Nm,12 double open end wrenches, size 6 - 32 mm,12 double open end wrenches, size 6 - 32 mm,25 combination wrenches, size 6 - 32 mm,7 inner hexagonal socket keys, size 2 / 2,5 / 3 / 4 / 5 / 6 / 8 mm, on ring,3 hexagonal socket wrenches with T-handle size 10 / 12 / 13 mm,4 screwdrivers, 0,4 x 2 x 63 / 0,6 x 3,5 x 100 /

1 x 5,5 x 125 / 1,6 x 10 x 175 mm,4 Phillips recess screwdrivers, PH 1 / 2, PZ 1 / 2,2 all-purpose pliers, 180 / 260 mm,2 machinist’s hammers, 200 / 500 g, 1 soft face hammer, Ø 35 mm,2 flat chisels, blade width 18 / 24 mm,4 drive pin punches, Ø 3 / 4 / 5 / 6 mm, 1 centre punch, shank Ø 10 mm,1 flat scraper, blade width 23 mm,2 universal grip pliers, 8-30 / 6-50 mm clamping range,1 diagonal cutting plier, 163 mm, 1 flat round-nosed plier, 150 mm,1 metal hacksaw, incl. 1 sawblade, 300 mm,1 junior metal hacksaw, incl. 1 sawblade, 150 mm,

each 1 pce. round file, flat file, three-square file 250 mm, cut no. 2,1 tape rule, 2 m,1 magnetic lifting tool, 520 mm, adhesive power 1800 g,1 oil squirt can (empty), 150 ml.


ÑÇ/ 51681

Tool Cabinet (Empty) and Tool Fixtures

h51683Tool Cabinets (Empty) TypeMade from high quality steel,powder-coated. With blinds,lockable with padlock. Withperforated steel rear panelsand side panels for individualstorage of different tool as-sortements. With cabinet fix-ture device (see pict.).51684Tool FixturesTypeWith storage guide for tool as-sortment 116-part (cat.-no.51679 101). Tools not in-cluded. Figure shows an ex-ample.ApplicationFor fixing at the rear panel ofthe cabinet cat.-no. 51683.

51683 101 +

51684 102 + 51679 101

Cabinet FixtureW x D x H weight 51683 … 51684 …

mm kgempty 640 x 250 x 1000 26 101

for 86 parts – – 101for 116 parts – – 102

51684

51683 - 51684

59.8 ENG/OP

H a n d T o o l s

55

Double Open End Wrench Sets DIN 3110, ISO 10102

VTypeGlazing chrome-plated, slimdesign. In drawer modulemade of plastics, compatiblewith Facom tool carts and toolboxes.

59810

Combination Wrench Sets DIN 3113 A, ISO 7738 A

VTypeGlazing chrome-plated, fineheads, ring end with OGV®-profile and offset 15°. Indrawer module made of plas-tics, compatible with Facomtool carts and tool boxes.

59812

Set content 59810 …size mm

9-part 6 x 7 / 8 x 9 / 10 x 11 / 12 x 13 / 14 x 15 / 16 x 17 /18 x 19 / 21 x 23 / 22 x 24 1013-part 26 x 28 / 27 x 29 / 30 x 32 102


16-part 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 22 / 24 1014-part 27 / 29 / 30 / 32 102

59810 102

59812 102

59810 101

59812 101

59813 Combination Wrench Set

VType 14-part, glazed chrome-plat-ed. Open-end with ratchetoperation. Ring end withOGV®-profile and offset15°.In drawer module madeof plastics, compatible withFacom tool carts and tool box-es.

Application Open-end can be used like areversible ratchet:Tightening without having totake off the wrench (1), auto-matic -gripping- of the nextedges for renewed tightening(2).


14-part 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 22 / 24 101

59813

(1) (2)

OGV®

OGV®

59.9ENG/OP

ß Hommel Hercules

VType 36-part, glazing chrome-plat-ed. In drawer module made ofplastics, compatible with Fa-com tool carts and tool boxes.

6-Point Socket Set


36-part 101


21-part 101

59814

Ñ/JQE 59814

Set contents

/ 10 hexagonal bits with OGV®-profile size 5,5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 mm,

J 4 bits for allen screws size 3 / 4 / 5 / 6 mm,

Q 3 bits for slotted screws, 4,5 / 6,5 / 8 mm,

E 2 bits for Phillips recess head screws PZ 1 / 2,1 adapter, 1/4 inch square x 1/4 inch hexagonal (bit),1 reversible ratchet,1 handle with sliding piece,1 socket handle,1 universal joint,

each 1 extension 55 and 150 mm,

J 10 hexagonal allen keys size 2 / 2,5 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 mm.

VType 21-part, glazing chrome-plat-ed. In drawer module made ofplastics, compatible with Fa-com tool carts and tool boxes.

6-Point Socket Set

Ç/ 59815

Set contents

/ 17 hexagonal bits with OGV®-profile size 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 /19 / 21 / 22 / 23 / 24 / 27 / 30 / 32 mm,1 reversible ratchet,1 universal joint,

each 1 extension 125 and 250 mm.

59815

VType 7-part, galvanized, ergonomichandle. 6-point with Hex-Plus® profile. Ball-shapedhead (size 3 mm without) forscrewing applications up to30° inclination. In drawermodule made of plastics,compatible with Facom toolcarts and tool boxes.

6-Point Ball Head Socket Key Set

J M 59816

59816

No. of Size 59816 …wrenches mm

7 3 / 4 / 5 / 6 / 7 / 8 / 10 101

59821 TORX® Allen Key Set

VType 7-part, burnished, ergonomicT-handle. In drawer modulemade of plastics, compatiblewith Facom tool carts and toolboxes.

Application By use of the ergonomichandle, both ends of the keycan be used very efficiently.

Note: TORX®-selector see cat.-no.37930.

No. of Size 59821 …wrenches T

7 10 / 15 / 20 / 25 / 27 / 30 / 40 101

T 59821

OGV®

59.10 ENG/OP

H a n d T o o l s

55 59819VType 2-part, consists of 1 water-pump pliers with -Bi-materi-al-coated handles, 250 mmand 1 grip pliers with alu-minium coating, 250 mm,clamping range max. 40 mm.In drawer module made ofplastics, compatible with

Facom tool carts and toolboxes.

Pliers Set 59819


2-part 101

59820VType 4-part, clamping range Ø 18 -60 mm. In drawer modulemade of plastics, compatiblewith Facom tool carts and toolboxes.

Snap Pliers Set 59820


4-part 101

Set contents1 internal snap plier, straight jaws, 1 internal snap plier, angled jaws 90°, 1 external snap plier, straight jaws, 1 external snap plier, angled jaws 90°.

59818VType 11-part, with handle. Damping handle, non-slip andergonomically shaped, withfinger guard. In drawer mod-ule made of plastics, compati-

ble with Facom tool carts andtool boxes.

Hammering Tool Set 59818

Set contents1 centre punch Ø 6 mm,4 drift punches Ø 3,9 / 4,9 / 5,9 / 7,8 mm, 6 drive pin punches Ø 1,9 / 2,9 / 3,9 / 4,9 / 5,9 / 7,9 mm.


11-part 101

59817VType 7-part. In drawer modulemade of plastics, compatiblewith Facom tool carts and toolboxes.

Hammering Tool Set59817

Set contents1 machinist’s hammer 580 g,1 plastic hammer 380 g, with inserts Ø 32 mm,1 centre punch Ø 6 mm,3 drive pin punches, Ø 3,9 / / 4,9 / 5,9 mm,1 flat chisel 18 mm .


7-part 101

59830


15-part 101

VType All VDE-tools tested in compli-

ance with VDE 0680/T 201, IEC 900.

Electrician’s Tool Assortment (15 pcs.) 59830

Set contents

Q 5 VDE screwdrivers for slotted screws 2,5 / 3,5 / 4 / 5,5 / 6,5 mm,

W 3 VDE screwdrivers for Phillips recess head screws PH 0 / 1 / 2,

1 VDE diagonal cutting plier, 1 VDE combination plier, 1 VDE wire stripper, 1 universal crimping plier for insulated terminals,1 electronic diagonal cutting plier, 1 electronic needle-nose plier with diagonal cutting pliers,1 cable stripping knife with recess for stripping insulation.

59.11ENG/OP

ß Hommel Hercules

V59833 101 Tool Assortment Application For maintenance and repairof office machines: Photocopiers, printers, scanners,fax machines, tele typewritersetc. All basic tools are includ-ed. Additional tools can beadded according to need.Suitcase not included.

59833 102 Suitcase (empty)TypeVery sturdy shell made of im-pact-proof polypropylene (480x 350 x 100 mm). Safetylocks, carrying handle andbottom studs. Upper shelf di-vided. Dividing walls imper-meable. Bottom shelf undivid-ed, therefore full flexibility. Im-mediate access to all toolsand the bottom shelf. Application Transport and organization,full workplace wherever need-

ed. Easy loading and organ-ized storage: time-savingwithout the danger of leavingthe tools are the finished proj-ect.

Tool Assortment (101 pcs.) 59833

Set contents

Ñ 10 hexagonal socket wrench bits, size 5,5 - 14 mm,3 bits for slotted screws, 4 / 6,5 / 8 mm, 2 bits for Phillips recess head screws PH 1 / 2,4 bits for allen screws size 3 / 4 / 5 / 6 mm,1 reversible ratchet, 117 mm, 1 handle with sliding piece, 115 mm, 1 handle with plastic grip, 155 mm, 1 universal joint, 2 extensions, 55 / 100 mm, 1 adapter, 1/4 inch square x 1/4 inch hexagonal (bit), 13 combination wrenches, size 5,5 - 18 mm,9 hexagonal socket keys, long size 1,5 / 2 / 2,5 / 3 / 4 / 5 / 6 / 8 / 10 mm,3 slotted screwdrivers, 3,5 / 5,5 / 6,5 mm,1 VDE screwdriver for slotted screws 4 mm,1 short screwdriver 6,5 x 40 mm,3 Phillips screwdrivers PH 0 / 1 / 2,1 screw-holding screwdrivers for slotted screws 0,8 x 7 mm,1 screw-holding screwdrivers for Phillips recess head screws PH 1,1 offset screwdriver 0,8 x 4 mm,5 precision/electronic screwdrivers 2 / 2,5 / 3 / 3,5 / 4 mm,3 precision/electronic Phillips screwdrivers PH 00 / 0 / 1,1 combination plier 180 mm, 1 long-nose flat plier 200 mm,

1 flat round-nosed plier 200 mm, angled jaw tips,1 diagonal cutting plier 160 mm,1 waterpump plier 165 mm, 1 internal snap ring plier, clamping range Ø 8-63 mm,1 external snap ring plier, clamping range Ø 3-63 mm, 1 cable stripping- and cutting plier 150 mm, 1 electronic diagonal cutting plier 110 mm,1 electronic needle-nose plier 140 mm,1 soldering iron 40 W, 1 desoldering device 190 mm,1 roll of solder, 2 mini cabler holder (black and red),1 flexible magnetic lifting tool 570 mm, max. Ø 12 mm, max. weight of object to

be lifted 850 g,1 cable stripping knife, folding type, 6 needle files H2 (flat, halfround, three-square, square, round, flat point),1 machinist’s hammer 345 g,1 plastic hammer 195 g, with inserts Ø 32 mm, 5 drive pin punches with guide sleeve Ø 1,5 / 2 / 3 / 4 / 5 mm,1 centre punch Ø 2,5 mm,1 scriber Ø 4 mm, 1 pocket tape rule 2 m,1 set of thickness gauges, metric, 19 leaves 0,04-1 mm.


Suitcase (empty) 102

Ñ 59833 101

59833 102

Ç (4)

Ñ (3)

59.12 ENG/OP

H a n d T o o l s

55

59850

(7)

Ç (5)

(8)

(9)

59850

TCS insert Contents Size(1) 10 double open end wrenches Jaw opening 6 x 7 / 8 x 9 / 10 x 11 / 12 x 13 / 14 x 15 /

16 x 17 / 18 x 19 / 20(2) 18 combination wrenches Jaw opening 6 / 7 / 8 / 9 / 10 / 11 / 12 /

13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 24 mm.(3) 10 socket wrench bits, 6-point Size 5,5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 mm,

1 reversible ratchet 117 mm,1 T-handle 116 mm,1 bit holder 150 mm,1 universal joint 37 mm,2 extensions 55 / 150 mm,1 bit holder 25 mm,10 Allen keys, 6-point, in holder 1,5 / 2 / 2,5 / 3 / 4 / 5 / 6 / 8 / 10 / 12 mm.

(4) 1 reversible ratchet 265,5 mm,1 T-handle 300 mm,1 universal joint 71 mm,3 extensions 52 / 130 / 255 mm.

(5) 17 socket wrench bits, 6-point Size 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20/ 21 / 22 / 24 / 27 /

(6) 4 workshop screwdrivers 0,6 x 3,5 x 75 / 0,8 x 4x100 / 1 x 5,5 x 125 / 1,2 x 6,5 x 150 mm,

3 Philips screwdrivers PH 1 / 2 / 3.(7) 1 machinist’s hammer 500 g,

1 nylon hammer Ø 35 mm,2 drive pin punches 6 x 150 / 6 x 175 mm,1 drive pin punch with guide sleeve 3,4 x 100 mm,1 flat chisel 175 mm.

(8) 1 combination pliers 180 mm,1 flat round-nosed pliers 200 mm,1 waterpump pliers 240 mm,1 diagonal cutting power pliers 160 mm.

(9) 1 internal snap ring (circlip) pliers J 2 (19-60 mm),1 external snap ring (circlip) pliers A 2 (16-60 mm),1 self-locking multi-purpose pliers 250 mm.

TCS Tool Assortment (98 pcs.)

í Consists of 9 TCS (ToolControl-System) insertswith 98 tools.Chemical-proof, perfect fit ofthe tools, with easy access. 2-layer, 2-colour system: to:black, bottom: yellow. If thereis no sign of yellow, all thetools are there.

Note:Suitable tool cabinets seecat.-no. 81791 and 81795.

Set 59850 …contents

98-part 101

(2)

(6)

NEW

(1)

59.13ENG/OP

ß Hommel Hercules

59855 103

Double Open End Wrench Sets DIN 3110, ISO 10102

íTypeJaw angle 15°, chrome-plat-ed, with flat heads, slim de-sign, chrome alloy steel. Tool Control System: Chem-ical-proof, perfect fit of thetools, with easy access. 2-lay-er, 2-colour system: to:black, bottom: yellow. If thereis no sign of yellow, all thetools are there. Compatiblewith Stahlwille tool carts andtool cases.

59855 101

59855 102

Set content 59855 …Jaw opening mm

10-part 6 x 7 / 8 x 9 / 10 x 11 / 12 x 13 / 14 x 15 / 16 x 17 / 18 x 19 / 20 x 22 / 21 x 24 / 24 x 27 10111-part 6 x 7 / 8 x 9 / 10 x 11 / 12 x 13 / 14 x 15 / 16 x 17 / 18 x 21 / 19 x 22 / 24 x 27 / 30 x 32 / 34 x 36 10210-part 6 x 7 / 8 x 9 / 10 x 11 / 12 x 13 / 14 x 15 / 16 x 17 / 18 x 19 / 20 x 22 / 24 x 27 / 30 x 32 103

59855

59860 103

Combination Wrench Sets DIN 3113 A, ISO 7738 A

íTypeRing end with AS-Drive pro-file, offset 15°, chrome-plat-ed, slim, flat heads, chromealloy steel. Tool Control System: Chem-ical-proof, perfect fit of thetools, with easy access. 2-lay-

er, 2-colour system: top:black, bottom: yellow. If thereis no sign of yellow, all thetools are there. Compatiblewith Stahlwille tool carts andtool cases.

K 59860 101

59860 102


17-part 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 21 / 22 / 24 10118-part 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 24 10221-part 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 21 / 22 / 24 /27 / 30 / 32 / 34 103

59860

59865 102


8-part 6 x 7 / 8 x 9 / 10 x 11/ 12 x 13 / 14 x 15 / 16 x 17 / 18 x 21 / 19 x 22 10110-part 6 x 7 / 8 x 9 / 10 x 11/ 12 x 13 / 14 x 15 / 16 x 17 / 18 x 21 / 19 x 22 / 24 x 27 / 30 x 32 102

Offset Ring Wrench Sets DIN 838, ISO 10104

K 59865 101íTypeDeeply offset on both ends,AS-Drive profile, rings withthin walls and polished,chrome-plated, made ofchrome alloy steel. Tool Control System: Chem-ical-proof, perfect fit of thetools, with easy access. 2-lay-


59865

NEW

NEW

NEW

59.14 ENG/OP

H a n d T o o l s

55

59875 6-Point Socket Set

íType20-part, chrome-plated,chrome alloy steel. Tool Control System:Chemi-cal-proof, perfect fit of thetools, with easy access. 2-lay-

er, 2-colour system: to:black, bottom: yellow. If thereis no sign of yellow, all thetools are there. Compatiblewith Stahlwille tool carts andtool cases.

É/K 59875


20-part 101

Set contents/ 16 bits for hexagonal sockets with AS-Drive profile Size 7 / 8 / 9 / 10 / 11 / 12 / 13 /14 /15 /

16 / 17 / 18 / 19 / 20 / 21 / 22 mm, 1 reversible ratchet,1 universal joint, 1 ea.extension, 125 / 240 mm.


íType32-part, chrome-plated,chrome alloy steel. Tool Control System: Chem-ical-proof, perfect fit of thetools, with easy access. 2-lay-


Ñ/JQWEK 59870


32-part 101

Set contents

/ 11 bits for hexagonal sockets with AS-Drive profileSize 5 / 5,5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 mm,

J 5 bits for Allen screws Size 3 / 4 / 5 / 6 / 8 mm, / 13 / 14 mm, Q 3 bits for slotted screws 0,6 x 3,5 / 1,0 x 5,5 / 1,2 x 8 mm, W 4 bits for Phillips recess head screws PH 1 / 2 / 3 / 4, E 2 bits for Phillips recess head screws PZ 1 / 2,

1 bit holder, 1/4 inch 4-point x 1/4 inch 6-point (bit). 1 reversible ratchet,1 handle with sliding piece,1 bit holder,1 universal joint, 1 ea. extension, 54 / 150 mm.

Sets of Ring Wrenches DIN 837/3118, ISO 10103/331859867

íType13-part, 11 ring wrenches jawopening 6-34 mm, 2 union nut(split-ring) wrenches jawopening 10-14 mm. AS-driveprofile, chrome-plated,

chrome alloy steel.Tool Control System: Chem-ical-proof, perfect fit of thetools, with easy access. 2-lay-er, 2-colour system: top:black, bottom: yellow. If thereis no sign of yellow, all thetools are there. Compatible

with Stahlwille tool carts andtool cases. K 59867

59880 Ratchet Set

íType6-part, chrome-plated,chrome alloy steel. Tool Control System:Chemi-cal-proof, perfect fit of thetools, with easy access. 2-lay-


Ç 59880


6-part 101

Set contents1 reversible ratchet, 1 handle with sliding piece, 1 universal joint, 1 ea.extension, 52 / 130 / 255 mm.

NEW

NEW

NEW

NEW


13-part 6 x 7 / 8 x 9 / 10 x 11 / 12 x 13 / 14 x 15 / 16 x 17 / 18 x 19 / 20 x 22 / 21 x 24 / 27 x 32 / 30 x 34 10110 x 11 / 12 x 14

59.15ENG/OP

ß Hommel Hercules

59881 Set of 6-point and 12-point Socket Wrenches



Ç/=K 59881


30-part 101

Set contents

/ 12 bits for hexagonal sockets with AS-Drive profile Size 12 / 17 / 18 / 19 / 20 / 2 / 27 / 30 / 32 mm, = 13 bits 12-point with AS-Drive-profile Size 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 1 / 17 / 18 / 19 / 30 mm,

1 reversible ratchet, / 17 / 18 / 19 / 30 mm, 1 universal joint, 1 ea.extension, 52 / 130 / 255 mm.

59883 Sets of Socket Wrenches

íTypeChrome-plated, chrome alloysteel. Tool Control System: Chem-ical-proof, perfect fit of thetools, with easy access. 2-lay-


Ç/=K 59883 101

Ç/K 59883 102


32-part 10117-part 102

Set contents 59883 101

/ 17 bits for hexagonal sockets with AS-Drive profile Size 10 / 11 / 12 / 13 / 14 / 1 / 19 / 20/ 21 / 22 / 24 / 27 / 30 / 32 mm,

= 13 bits 12-point with AS-Drive-profile Size 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 /19 / 30 mm,

= 2 bits, long, 12-point with AS-Drive profile Size 22 / 27 mm. / 17 / 18 / 19 / 30 mm,

Set contents 59883 102

/ 17 bits for hexagonal sockets with AS-Drive profile SW10 / 11 / 12 / 13 / 14 / 15 / 16 /17 / 18 / 19 / 20 / 21 / 22 / 24 / 27 /30 / 32 mm,

NEW

NEW

Set of Screwdrivers



ÇJH/ 59885


12-part 101

Set contents

J 2 bits for Allen screws Size 12 / 17 mm, J 6 bits, long, for Allen screws Size 5 / 6 (100 mm) / 6 (220 mm) / 7 / 8 / 10 mm, H 3 bits, long, for Trisquare socket head screws (XZN) M8 (80 mm) / M8 (140 mm) / M1 / 8 / 10 mm, / 1 spark plug wrench 3/8 inch drive, 20,8 mm output, adjustable 123-182 mm.

59885

NEW

59.16 ENG/OP

H a n d T o o l s

55

59900 Sets of Combination Wrenches DIN 3113 A/B, ISO 7738 A/B

ZTypeIn large insert (T 315 x B 310mm) made of impact-proofABS-plastics, black sha-greened. For the GEDORE in-sert system of tool carts androlling workbenches with vari-able drawer division systems.

59900 101Type25-part. 17 combinationwrenches, ring end with UD-profile and offset 10°, slim,flat heads, chrome-plated,rings polished. 8 6-point Allenkeys in holder.

59900 102Type25-part. 17 combinationwrenches, ring end with UD-profile and offset 15°, withsectional shank, chrome-plat-ed, rings polished. 8 6-pointAllen keys in holder.

59900 103Type5-part. 5 combination wrench-es, ring end with UD-profileand offset 15°, with sectionalshank, chrome-plated, ringspolished.

J; 59900 101

J; 59900 102

; 59900 103


25-part 10125-part 102

5-part 103

Set contents 59900 101 + 10217 combination wrenches Jaw opening 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 /

14 / 15 / 16 / 17/ 18/ 19 / 20 / 21 / 22 mm, J 8 6-point Allen keys Size 2 / 2,5 / 3 / 4 / 5 / 6 / 8 / 10 mm

Set contents 59900 1035 combination wrenches Jaw opening 23 / 24 / 27 / 30 / 32 mm.

Set of Ratchet Combination Wrenches59905

ZType10-part, ratchet-type loosen-ing or quick tightening with thering ratchet (UD profile) in

one go. Precision serration (72teeth), low height. In 1/3 smallinsert (T 157,5 x B 310 mm)made of impact-proof ABS-plastics, black shagreened.

For the GEDORE insert sys-tem of tool carts and rollingworkbenches with variabledrawer division systems.


10-part 8 / 10 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 101

; 59905

Double Open End Wrench Set DIN 3110, ISO 1010259910

ZType10-part, jaw angle 15°,chrome-plated, with flat, finelyground heads. In 1/3 small in-sert (T 157,5 x B 310 mm)made of impact-proof ABS-

plastics, black shagreened.For the GEDORE insert sys-tem of tool carts and rollingworkbenches with variabledrawer division systems.


10-part 6 x 7 / 8 x 9 / 10 x 11 / 12 x 13 / 14 x 15 / 16 x 17 / 18 x 19 / 20 x 22 / 21 x 23 / 24 x 27 101

59910

Set of Gooseneck Ring Wrenches DIN 838, ISO 1010459915

ZType8-part, deeply offset on bothends. Thin-walled, polishingrings with UD-profile,chrome-plated. In 1/3 small insert (T 157,5 x B 310 mm)

made of impact-proof ABS-plastics, black shagreened.For the GEDORE insert sys-tem of tool carts and rollingworkbenches with variabledrawer division systems.


8-part 6 x 7 / 8 x 9 / 10 x 11 / 12 x 13 / 14 x 15 / 16 x 17 / 18 x 19 / 20 x 22 101

; 59915

NEW

NEW

NEW

NEW

59.17ENG/OP

ß Hommel Hercules


ZType37-part, chrome-plated. Inlarge insert (T 157,5 x B 310 mm) made of impact-proof ABS-plastics, black sha-

greened. For the GEDORE in-sert system of tool carts androlling workbenches with vari-able drawer division systems.

Ñ/J%T 59920


37-part 101

Set contents/ 12 bits for hexagonal sockets Size 4 / 5 / 5,5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13J 5 bits for Allen screws Size 3 / 4 / 5 / 6 / 8 mm, % 6 sockets for outside TORX®-screws E 4 / 5 / 6 / 7 / 8 / 10, T 9 sockets for inside TORX®-screws T 8 / 9 / 10 / 15 / 20 / 25 / 27 / 30 / 40,

1 reversible ratchet, , 1 handle with sliding piece, 1 bit holder with plastic handle, 1 universal joint, 1 extension 97 mm.


ZType24-part, chrome-plated. In 1/3small insert (T 157,5 x B 310mm) made of impact-proofABS-plastics, black sha-


É/J 59925


24-part 101

Set contents/ 14 bits for hexagonal sockets Size 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 19 mm, J 5 bits for Allen screws Size 4 / 5 / 6 / 8 / 10 mm, / 19 mm,

1 reversible ratchet, 1 handle with sliding piece, 1 universal joint, 1 ea.extension 125 / 250 mm.

59927 Set of Square Wrench und Screwdriver Bits



ÉJT%QWE 59927


39-part 101

Set contentsJ 6 bits for hexagonal sockets, long, size 4 / 5 / 6 / 7 / 8 / 10 mm, T 7 sockets for inside TORX®-screws T 20 / 25 / 27 / 30 / 40 / 45 / 50, T 7 sockets for inside TORX®-screws, long, T 20 / 25 / 27 / 30 / 40 / 45 / 50, % 8 sockets for outside TORX®-screws E 5 / 6 / 7 / 8 / 10 / 11 / 12 / 14, Q 5 bits for slotted screws 5,5 / 6,5 / 8 / 10 / 12 mm, W 3 bits for Phillips recess head screws PH 1 / 2 / 3, E 3 bits for Phillips recess head screws PZ 1 / 2 / 3.

59930 Ratchet Set



Ç 59930


5-part 101

Set contents1 reversible ratchet, 1 handle with sliding piece, 1 universal joint, 1 ea.extension 125 / 250 mm.

NEW

NEW

NEW

NEW

59.18 ENG/OP

H a n d T o o l s

55

59933 Set of Allen Keys

ZType15-part, chrome-plated. Inlarge insert (T 157,5 x B 310 mm) made of impact-proof ABS-plastics, black sha-greened. For the GEDORE in-sert system of tool carts androlling workbenches with vari-able drawer division systems.

ÇJ 59933


15-part 101

Set contentsJ 9 bits for Allen screws Size 5 / 6 / 7 / 8 / 9 / 10 / 12 / 14 / 17 mm, J 6 bits for Allen screws, long, Size 5-90 / 6-90 / 8-90 / 10-140 / 12-140 / 14-140 mm.

59932 Set of Square Wrench und Screwdriver Bits

ZType26-part, chrome-plated. Inlarge insert (T 157,5 x B 310 mm) made of impact-proof ABS-plastics, black sha-greened. For the GEDORE in-sert system of tool carts androlling workbenches with vari-able drawer division systems.

Ç/J 59932


26-part 101

Set contents/ 19 bits for hexagonal sockets Size 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 /

18 / 19 / 24 / 26 / 27 / 28 / 30 / 32 mm, J 7 bits for Allen screws Size 6 / 7 / 8 / 9 / 10 / 12 / 14 mm. / 24 / 26 / 27

/ 28 / 30 / 32 mm,

59950 Tool Assortments

Note:Suitable tool carts see cat.-no. 81714.

Set contents 59950 101 (107 pcs.)

Ñ 12 bits for hexagonal sockets with Tractions profile Size 4 / 5 / 5,5 / 6 / 7 / 8 // 13 / 14 mm,

11 bits for hexagonal sockets with Tractions profile, long Size 4 / 5 / 5,5 / 6 / 711 / 12 / 13 mm,

5 bits for Allen screws Size 3 / 4 / 5 / 6 / 8 mm, / 11 / 12 / 13 mm, 4 bits for slotted screws 0,6 x 3,5 / 0,8 x 4,0 / 1,0 x 5,5 / 1,2 x 8,0 mm, 4 bits for Phillips recess head screws PH 1 / 2 / 3 / 4, 3 bits for Phillips recess head screws PZ 1 / 2 / 3, 9 sockets for inside TORX®-screws T 8 / 9 / 10 / 15 / 20 / 25 / 27 / 30 / 40, 7 sockets for outside TORX®-screws E 4 / 5 / 6 / 7 / 8 / 10 / 11, 2 reversible ratchets, 1 joint reversible ratchet, 1 handle with sliding piece,1 socket handle, 1 universal joint, 3 extensions 55 / 101,5 / 147 mm, 1 extension with plastic handle, flexible 130 mm,

É 10 bits for hexagonal sockets with Tractions profile Size 10 / 11 / 12 / 13 / 14/ 17 / 18 / 19 mm,

10 bits 12-point with Tractions profile, long Size 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 mm,

4 bits for hexagonal sockets for spark plugs (cars and motor bikes), 3 sockets for inside TORX®-screws T 40 / 45 / 50, / 17 / 18 / 19 mm, 4 sockets for outside TORX®-screws E 10 / 11 / 12 / 14, 2 reversible ratchets, 2 joint reversible ratchets, 1 handle with sliding piece, 1 handle with joint, 1 crank, 4 extensions 36 / 75 / 202 / 508 mm.

ÑÉML 59950 101

NEW

NEW

NEWSet Module size 59950 …

contents W x D mm107-part 700 x 400 101

86-part 700 x 400 102113-part 700 x 400 103

94-part 700 x 400 10438-part 700 x 400 105

59.19ENG/OP

ß Hommel Hercules

ÑüÇ 59950 102

ÑÉML 59950 103

ÑüÉÇ 59950 104

59950 105


Ñ 1 bit assortment, 7-part (1,0x5,5 / 1,0x6,5 / PH1 / PH2 / PZ1 / PZ2 / 1 holder), 1 bit assortment, 10-part (T 8 / 9 / 10 / 15 / 20 / 25 / 27 / 30 / 40 / 1 holder),11 bits for TORX®-screws T 6 / 7 / 8 / 9 / 10 / 15 / 20 / 25 / 27 / 30 / 40, 1 bit for TORX®-screws, long T 25, 10 bits with hole for TORX®-screws T 7 / 8 / 9 / 10 / 15 / 20 / 25 / 27 /30 /40, 1 reversible ratchet for mounting bits,

ü 4 bits for TORX®-screws T 40 / 45 / 50 / 55, 2 bits with hole for TORX®-screws T 45 / 50,

Ç 20 bits 12-point Size 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21/ 22 /23 / 24 / 26 / 27 / 28 / 30 / 32 mm,

5 bits 12-point, long Size 19 / 20,8 / 21 / 22 / 24 mm, 6 sockets for outside TORX®-screws T 12 / 14 / 16 / 18 / 20 / 24, 5 bits for Allen screws, long Size 5 / 6 / 7 / 8 / 10 mm, 3 sockets for inside TORX®-screws T 50 / 55 / 60,

Ç 2 sockets for inside TORX®-screws, long T 45 / 55, 3 inserts for Trisquare socket head screws (XZN), long M 8 / 10 / 12, 1 reversible ratchet,1 handle with sliding piece, 1 universal joint, 2 extensions 125 / 248 mm, 4 connectors (1/4x1/4 / 3/8x1/4 / 3/8x5/16 / 1/2x5/16 inch), 1 set of adapters (1/4x3/8 / 3/8x1/4 / 3/8x1/2 / 1/2x3/8 / 1/2x3/4 / 3/4x1/2 inch)1 TORX® Selektor T 10 - 60, E 6 - 16.


Ñ 12 bits for hexagonal sockets with Tractions profile Size 4 / 5 / 5,5 / 6 / 7 / 89/10/11/12 /13 /14 mm,

11 bits for hexagonal sockets with Tractions profile, long Size 4 / 5 / 5,5 / 6 / 7 / 8 / 9 / 10/ 11 / 12 / 13 mm,

5 bits for Allen screws Size 3 / 4 / 5 / 6 / 8 mm, 4 bits for slotted screws 0,6 x 3,5 / 0,8 x 4,0 / 1,0 x 5,5 / 1,2 x 8,0 mm, 4 bits for Phillips recess head screws PH 1 / 2 / 3 / 4, 3 bits for Phillips recess head screws PZ 1 / 2 / 3, 9 sockets for inside TORX®-screws T 8 / 9 / 10 / 15 / 20 / 25 / 27 / 30 / 40, 7 sockets for outside TORX®-screws E 4 / 5 / 6 / 7 / 8 / 10 / 11, 2 reversible ratchets, 1 joint reversible ratchet, 1 handle with sliding piece, 1 socket handle, Steckgriff, 1 universal joint, Kardangelenk, 3 extensions 55 / 101,5 / 147 mm, 1 extension with plastic handle, flexible 130 mm,

É 10 bits for hexagonal sockets with Tractions profile Size 10 / 11 / 12 / 13 / 14 /15/ 16 / 17 / 18 / 19 mm,

10 bits 12-point with Tractions profile, long Size 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 mm,

2 sockets for inside TORX®-screws T 40 / 45,

4 sockets for outside TORX®-screws E 10 / 11 / 12 / 14, 10 joint bits for hex sockets Size 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 191 joint socket for Allen screws Size 7mm, 2 reversible ratchets, 2 joint reversible ratchets, 1 handle with sliding piece, Griff mit Gleitstück, 1 handle with joint, 1 crank, 4 extensions 36 / 75 / 202 / 508 mm.


Ñ 1 bit assortment, 7-part (1,0x5,5 / 1,0x6,5 / PH1 / PH2 / PZ1 / PZ2 / 1 holder), 1 bit assortment, 10-part (T 8 / 9 / 10 / 15 / 20 / 25 / 27 / 30 / 40 / 1 holder),11 bits for TORX®-screws T 6 / 7 / 8 / 9 / 10 / 15 / 20 / 25 / 27 / 30 / 40, 1 bit for TORX®-screws, long T 25, 10 bits with hole for TORX®-screwsT 7 / 8 / 9 / 10 / 15 / 20 / 25 / 27 / 30/ 40, 1 reversible ratchet for mounting bits,

ü 4 bits for TORX®-screws T 40 / 45 / 50 / 55, 2 bits with hole for TORX®-screws T 45 / 50,

É 4 bits for Allen screws Size 5 / 6 / 8 / 10 mm, 5 bits for slotted screws 1,0x7 / 1,4x9 / 1,6x10 / 2,0x12 / 1,5x13 mm, 3 bits for Phillips recess head screws PH 2 / 3 / 4, 1 impact screwdriver 120 Nm for screws M 5 - M 10,

Ç 20 bits 12-point 20bits 12-point Size 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 /19 / 20 / 21 /22 / 23 / 24 / 26 / 27 / 28 / 30 / 32 mm,

4 sockets for outside TORX®-screws T 16 / 18 / 20 / 24,5 bits for Allen screws, long Size 5 / 6 / 7 / 8 / 10 mm, 4 sockets for inside TORX®-screws T 50 / 55 / 60, 70, 2 sockets for inside TORX®-screws, long T 45 / 55, 3 inserts for Trisquare socket head screws (XZN), long M 8 / 10 / 12

1 reversible ratchet, 1 handle with sliding piece, 1 universal joint, 2 extensions 125 / 248 mm, 4 connectors (1/4x1/4 / 3/8x1/4 / 3/8x5/16 / 1/2x5/16 inch), 2 adapters (3/8x3/8 / 1/2x3/8 inch), 1 TORX® Selektor T 10 - 60, E 6 - 16.

NEW

NEW

NEW

NEW

Set contents 59950 105 (38-part.)18 combination wrenches Jaw opening 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 21 / 22 / 24 / 27 mm, 4 ring wrenches for outside TORX®-screws E 6 x 8 / 10 x 12 / 14 x 18 / 20 x 24, 8 12-point ratchet ring wrenches Jaw opening 6 x 7 / 8 x 9 / 10 x 11 / 12 x 13 / 14 x 15 / 16 x 18 / 17 x 19 / 21 x 22 mm, 1 double joint wrench for Allen screws Size 10 x 14 mm, 1 digital pocket slide caliper 150 mm, 2 scribers 150 / 250 mm, 1 torch, flexible 400 mm, 2 tape rules 2 / 5 m, 1 multi-purpose knife, blade width 18 mm.

59.20 ENG/OP

H a n d T o o l s


Note:Suitable tool carts see cat.-no. 81714. É 59960


30-part 101

Set contents

É 4 bits for Allen screws Size 5 / 6 / 8 / 10 mm, 5 bits for slotted screws 1,0x7 / 1,4x9 / 1,6x10 / 2,0x12 / 1,5x13 mm, 3 bits for Philips recess head PH 2 / 3 / 4, 1 tyre lever 610 mm x 60°, 1 set of tools for removing broken screws, 8-part (size 1-8), 2 adapters (3/8x3/8 / 1/2x3/8 inch), 1 impact screwdriver 120 Nm for screws M 5 - M 10, 1 machinist’s hammer 500 g, 1 soft face hammer, no rebound, 40x115 mm, 1 plastic hammer, Ø 35 mm, 1 machinist’s hammer 3/4 lbs, 1 centre punch 120x10x4 mm, 4 drive pin punches 150x10x3 / 150x10x4 / 150x10x5 / 150x10x6 mm, 2 flat chisels 150 / 200 mm, 2 multi-purpose self-locking multi-purpose pliers 180 / 250 mm.

59955 Tool Assortments

Note:Suitable tool carts see cat.-no. 81714.

59955 101

59955 102


12-part 10121-part 102

Set contents 59955 101 1 VDE combination plier 160 mm, 1 VDE long-nose flat plier 160 mm, 1 VDE flat round-nosed plier, flat 160 mm, 1 VDE flat round-nosed plier, offset 45° 200 mm, 1 VDE long round-nose plier 160 mm, 1 VDE diagonal cutting plier 160 mm, 1 VDE diagonal cutting power plier 180 mm, 1 set of snap ring (circlip) plier 8-part (J1-J21 / A1-A21), 1 waterpump plier 260 mm, 1 lever diagonal cutting plier 160 mm. 1 electronics flat-nosed plier 125 mm, 1 electronics flat round-nosed plier 125 mm.

Set contents 59955 1028 6-point Allen keys with T-handle

Size 2 / 2,5 / 3 / 4 / 5 / 6 / 8 / 10 mm, 1 VDE combination plier 160 mm, 1 VDE long-nose flat plier 160 mm, 1 VDE flat round-nosed plier, flat 160 mm, 1 VDE flat round-nosed plier, offset 45°

200 mm, 11 VDE long round-nose plier 160 mm, 1 VDE diagonal cutting plier 160 mm, 1 VDE diagonal cutting power plier 180 mm, 1 flat round-nosed plier160 mm, 1 waterpump plier 260 mm, 2 multi-purpose self-locking multi-purpose pliers

178 / 230 mm, 1 diagonal cutting power plier 180 mm, 1 lever diagonal cutting plier 160 mm.

NEW

NEW

ß hommel hercules tool assortment (60 pcs.)...1 reversible ratchet, 275 mm, 1 handle with sliding...

Documents