Презентация powerpoint...eaeu tr "on safety of equipment for children's...
TRANSCRIPT
| 1 THE TREATY ON THE EURASIAN ECONOMIC UNION of May 29, 2014
Establishment and application of mandatory requirements to products in technical regulations
Establishment of a single procedure of conformity assessment
Voluntary application of standards Eurasian Conformity
66 items – 70% of circulated products
42 EAEU TRs are adopted
35 CU TRs are enforced
18 projects of EAEU TRs are under drafting
27 amendments to CU TRs are under
drafting
more than 500 000 of Single certificates
of conformity
more than 2,0 million of Single forms of
declarations of conformity
more than 11 000 documents in Lists of
Standards
Article 51 General principles of technical regulation
Article 52 Technical Regulations and Standards of the Union
Article 53 Circulation of Products and Enforcement of
Technical Regulations
Article 54 Accreditation
Article 55 Elimination of Technical Barriers in Mutual Trade
with Third Countries
Appendix 9 Protocol on Technical Regulation
Appendix 10 Protocol on Agreed Policy for Ensuring
Uniformity of Measurements
Appendix 11 Protocol on Recognition of Results of
Accreditation of Conformity Assessment Authorities
NEW TECHNICAL REGULATIONS OF THE UNION | 2
EAEU TR "On Restrictions of the Use of Dangerous Substances in Electrotechnical and Radioelectronical Devices" (EAEU TR 037/2016)
Decision of the EEC Council No. 113 dated October 18, 2016
EAEU TR "On Safety of Attractions" (EAEU TR 038/2016)
Decision of the EEC Council No. 114 dated October 18, 2016
EAEU TR "On Safety of Fish and Fishery Products“ (EAEU TR 040/2016)
EAEU TR "On Requirements for Mineral Fertilizers" (EAEU TR 039/2016)
Decision of the EEC Council No. 162 dated October 18, 2016
Decision of the EEC Council No. 150 dated November 30, 2016
2
EAEU TR "On Safety of Chemical Products"(EAEU TR 041/2017)
Decision of the EEC Council No. 19 dated March 3, 2017
Decision of the EEC Council No. 21 dated May 17, 2017
EAEU TR "On safety of equipment for children's playgrounds"(EAEU TR 042/2017)
EAEU TR "Requirements for liquefied petroleum gases for their use as fuel" (EAEU TR 036 /2016)
Decision of the EEC Council No. 68 dated August 9, 2016
| 3
Adopted at the session of the EEC Council on October 18, 2016
Procedure for the development, adoption, amendment
and cancellation of technical regulations of the
Eurasian Economic Union
Procedure for the development and adoption of lists of
standards to the EAEU TR
More interested parties in the development
of the EAEU TR and Lists of Standards
Amendments in the Decision No. 48 of
the EEC Council dated June 20, 2012
To replace Decision of the EEC Board
No. 306 dated December 25, 2012
Implementation of the Treaty on the
EAEU;
Higher transparency taking into
account WTO principles;
Requirements based on international
and regional standards;
Introduction of the institute for
assessment of the regulatory impact
at the level of the Commissions of
EAEU TR and lists of standards
DEVELOPMENT OF UNIFIED REQUIREMENTS 3
Amendments No. 147 dated 18.10.2016
Amendments No. 161 dated 18.10.2016
| 4 4 Standards are the main tool for the
implementation of technical regulations
2093 standards
Republic of Belarus
415 GOSTs
Russian Federation
1,435 GOSTs
Republic of Kazakhstan 243 GOSTs
10 based on EEC
UN documents
175 based on EN documents
181 based on ISO documents
188 based on IEC documents
34 Lists of Standards to the TR
32 Standardization Programs
Development of new and innovative products
Ensuring higher quality of products, incl. for import substitution
Improvement of tools for the implementation of the EAEU TR taking into account business and consumers’ needs, current economy and technology state
ENSURANCE OF UNIFORMITY OF MEASUREMENTS
IS THE TOOL OF ENSURING SAFETY OF PRODUCTS
Article 51 of the Treaty on the EAEU and Annex №10
10
Metrological examination of draft technical
regulations of the EAEU and draft lists of standards
for EAEU TRs
Inter-laboratory comparative tests
(inter-laboratory comparisons)
Application of adopted units of measurements
Verification procedure for measurement equipment
Type approval procedure for reference materials
Validation procedure for the measurement methods
adopted as a reference method
Type approval procedure for measuring instruments
Mutual recognition of the results of activities
ensuring the uniformity of measurements
Information exchange
Based on IOLM (International
Organization of Legal Metrology) principles,
CIS agreements
Setting up the mechanisms of
mutual recognition of
results of activities ensuring
the uniformity of measurements
Coordinated policy of ensuring the uniformity of measurements
| 5
| 6
State registration
Certification
Declaring with the help of a third Party
Declaring on the basis of own evidences
CONFORMITY ASSESSMENT IS A NECESSARY TOOL FOR
TECHNICAL REGULATION
Standard schemes
are developed based on:
laws of the EAEU Member States
using international experience (Guideline
ISO/IEC 67) and approaches adopted in
the EU (Decision No. 768/2008/EU)
6
Conformity assessment forms, processes and procedure shall be determined in technical regulations of the Union on the basis of standard conformity assessment
procedures
UNIFIED FORMS OF DOCUMENTS ON CONFORMITY ASSURANCE
Single form of certificate of
conformity
Single form of declaration
of conformity
Single form of Product State Registration Certificate in
accordance with the CU TR
Single form of certificate of the type
(CU TR "On Safety of Equipment Operating under
Manometric Pressure")
Single form of certificate of the type
(CU TR "On Safety of Machines and Equipment")
Single form of the certificate of tests of lifting
chains (CU TR "On Safety of Machines and
Equipment")
EEC Board Decision No. 299 dated 28.05.2010
(as amended by the Decision No. 82
dated 02.12.2015)
EEC Board Decision No. 293 dated 25.12.2012
EEC Board Decision No. 293 dated 25.12.2012
EEC Board Decision No. 81 dated 09.04.2013
EEC Board Decision
No. 75 dated 09.04.2013
EEC Board Decision
No. 265 dated 18.11.2013
7
Single Register of Certificates of Conformity Issued and
Declarations of Conformity Registered
Information on issued or accepted documents on conformity assessment for
products:
- included in the Single list of products subject to mandatory conformity
assessment (confirmation) in the Customs Union with the issuance of single documents
approved by Decision of the CU Commission No. 620 dated April 7, 2011;
- for which the technical regulation of the Union has been effected,
are introduced in the Single Register of certificates of conformity issued and
declarations of conformity registered
Creation and keeping of the list shall be maintained in the order established by
Decision of the CU Commission dated June 18, 2010 No. 319 (Appendix 2)
8
Products complying with requirements of the relevant technical
regulations of the Union and having passed conformity assessment procedure
set by technical regulations of the Union shall bear the unified mark of
circulation of products in the market of the Union
Products Marking
Marking with a unified mark of circulation is performed prior to the release
of the products to the Union market.
Image of the unified mark of circulation of products in the Union market
and the procedure of its application were approved by Decision of the
Customs Union Commission No. 711 dated July 15, 2011
EAC stands for Eurasian Conformity
9
10
Harmonisation of rules and approaches in
the field of accreditation with international
standards
ISO/IEC 17000 series
harmonization of requirements for experts
creation of national registries of experts
ensuring equal level of competences for conformity assessment bodies
increasing reliability of the results of conformity assessment
increasing responsibility of experts and organizations carrying out conformity assessment
Accreditation systems should ensure:
reliable confirmation of competences of its participants,
unified approaches to assessment of the correctness of the mandatory requirements
implementation
– mechanism of trust assurance
National Accreditation Systems
Accreditation
11
Draft international agreements are developed by the Working groups consisting of specialists from
authorized bodies, industry representatives, and business community
INTEGRATION IN THE FIELD OF TECHNICAL REGULATION
Increasing the level of safety of circulated products
On the rules and procedures to ensure safety and circulation of products, the requirements for which are not established by the Technical Regulations of the Eurasian Economic Union
Application of equivalent approaches to surveillance on the market
On the principles and approaches to the harmonisation of legislation of EAEU member states in the area of state control (surveillance) over compliance with EAEU Technical Regulations
Ensuring control/supervision functions based on unified rules and approaches
Risk-oriented approach
Information system for food safety
Control/supervision for products released into circulation and already in circulation, as well as
relevant manufacturing processes
Within the Union
Based on Directive 2001/95/EU
Based on EU Regulations No. 765/2008
Products circulated on the EAEU market
Not included into ЕPP Free circulation
Included into ЕPP National requirements
Included into ЕPP Approved by EAEU TR
1
2
| 12
Creation of mechanisms for the elimination of technical barriers to trade with third countries
compliance of the products with
the EAEU TR (in the territory of
the EAEU) and legal requirements
of a third country (in the territory of
the third country)
mutual recognition of the results of conformity
assessment by the member states and the
third country
availability of an authorized
accreditation body in a third
country
definition of equivalence for procedures of
accreditation and conformity assessment
including through mutual comparative
assessments
definition of equivalence
for mandatory
requirements
Based on WTO principles
INTEGRATION IN THE FIELD OF TECHNICAL REGULATION 12
3
On the procedure and conditions for removal of technical barriers to mutual trade with
third countries
Draft international agreements are developed by the Working groups consisting of specialists from
authorized bodies, industry representatives, and business community
INTERNATIONAL COOPERATION IN THE FIELD
OF THE TECHNICAL REGULATION 13
Memorandum between the Eurasian Economic
Commission and the Eurasian Economic Commission
and the Eurasian Interstate Council for
Standardization, Metrology and Certification
Memorandum of Understanding between the Eurasian Economic Commission and the International
Electrotechnical Commission
Roadmap for cooperation on technical regulation and standardization
International Standardization Organization
European Committee for
Standardization
European Committee for Electrotechnical Standardization
Euro-Asian Cooperation of
National Metrological Institutions
International and regional organizations:
Cooperation perspectives:
www.eurasiancommission.org
14
The Technical Regulation and Accreditation
Department
Answers to topical questions
INFORMATION COOPERATION