beghellibeghelli.bg/files/katalog-osvetitelni-tela-beghelli-elplast.pdf · dark light optics...
TRANSCRIPT
BEGHELLI
The range of Elplast-Beghelli luminaires published on
this catalogue has been created to gather the most
concrete lighting solutions mainly based on energy
saving sources.
Innovative technologies development opens new
ways of application in living, industrial and tertiary
sectors.
The use of very high energy saving light sources into
most of the Elplast-Beghelli lighting fixtures here
published, allows to widen their application to many
sectors while keeping firm guidelines like:
environmental preservation, energy and economical
savings and the increase of the fixtures life cycle.
The multi-function capability of severallighting fixtures can be resumed as itfollows: making lighting affordablethanks to technical solutions that sinceyesterday were an exclusive ofcommercial and industrial fields due totheir running and purchase cost.
Description of symbols
DARKLIGHT
Dark light optics conformal to UNI EN 12424-1
DKL1 Low luminance optics (less than 200Cd/m2 for angles above 60°longitudinal and transversal and for radial angles conformal to EN12464-1
DKL2 Low luminance optics, less than 500Cd/m2 for angles above 65°longitudinal and transversal, and for radial angles conformal to EN12464-1
DKL3 Low luminance optics conformal to EN12464-1DKL3
DKL2
DKL1
Direct lighting fixtures
Fixtures with LED light source
IP65 Fixture protection degree (according to CEI EN 60598-1)
IK05 Kinetic energy resistance degree (according to EN50102)
Fixtures specifically suitable for installation in ambients with fuel dust (MARCI norm sites
as per CEI 64-8 751.03.4).These fixtures are granting high levels
of protection and limited surface temperaturesunder all working conditions.
The LED source working life is intended to be at 25°Cof ambient temperature if not differently indicated.
◊
T5 Linear fluorescent T5 or T8 lamp
LED LED light source
Fixture compliant with european community normatives
Glow wire test temperature850°C
D
The LED light sources adopted in this line of products are of high efficiency and are supplied
with dedicated drivers to optimise performances.The mix of these two factors grants to the fixture
a very long working life.
Technologically advanced products specifically designed to save energy,
to be recyclable and to reduce the consumable parts during the use.
Maintenance free fixtures
IP42IP20
T8
UV-OILFixtures with special resistance to UV radiation
and mineral oil
Fixtures suitable for installation in sport hallsPPALESTRA
Class II insulation lighting fixture. Fixtures without this simbol are to be considered
as of class I
HIGHBAYpag. 38
IP65
MU
LTI-
FUN
CTIO
NFL
OO
DLI
GH
TM
600
WA
LL A
ND
CE
ILIN
GB
ATTE
ND
OW
NLI
GH
TH
IGH
BAY
Multi-function Floodlight
Table of content
Index per part number page 40
MULTIBAY LED 100pag. 8
IP65
MULTIBAY LED 50pag. 6
IP65
MULTIBAY LED 30pag. 4
IP65
Floodlight
SEF LEDpag. 12
IP65
POWER SEF LEDpag. 10
IP65
FLOODLIGHTpag. 14
IP65
Batten
REGLED ECOpag. 28
REGLED METALpag. 30
IP40 IP30
REGLETTE T5pag. 32
IP30
Downlight
DOWNLIGHT LED FLATpag. 34
IP42IP20
DOWNLIGHT LEDpag. 36
IP40IP20
Highbay
M600 recessed and surface mount
PANELEDpag. 16
I SQUAREpag. 18
IP40 IP20
P SQUAREpag. 20
IP20
Wall and ceiling
FULL MOONpag. 22
HALF MOONpag. 24
IP66 IP66
ELLIPSpag. 26
IP66
B B1
L
B2
L1 Ø
4
LED powered floodlight with aluminium die cast body and technopoly-mer screwable top for quick access to the junction box. Screen is madeof frosted tempered glass to avoid any glaring.Versatility is the great innovation in this fixture that can be installed sus-pended with steel wires, on wall with an adjustable bracket and onground with a foot base accessory and a single spyke.Its small dimension makes Multibay ideal for both architectural and in-dustrial types of installation.
MultiBay LED 30Multi-function Floodlight
GENERAL SPECIFICATION
Power 30 W
Supply 220/240 VAC - 50/60 Hz
Conformity to EN60598-1; EN60598-2-1; EN 62471
Protection degree IP65
Ambient temp. -20°C +40°C
Mounting Wall, ground, suspended
Body Die cast aluminium (RAL 7040)
Reflector White painted die cast aluminium
Power supply Integrated, Electronic
Power supply PC and fiberglasscompartment
Screen Frosted tempered glass
Life 35000 h ◊
Part # Description Packaging
- MOUNTING BRACKET 1- TECHNOPOLYMER FOOT BASE 1- SPYKE 1- SUSPENSION WIRE 1
ACCESSORIES - Supplied with
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
150
450
300
600
PART NUMBER 76300
30W
30 200 204 159 131 170 100 80 1,8
Power • Dimension (mm) • N° Weight kgW Ø B B1 B2 L L1 LED
IP65 IK08 850°C
Multy bay 30 REPLACES100W
HALOGEN FLOODLIGHTS
Suspension Wall / Ceiling with adjustable bracket
Ground with spyke Construction site light
5
MU
LTI-
FUN
CTIO
NMultyBay LED 30W Part # Description EAN code Power
WColourtemp. Ra N°
LEDFlux(lm)
Lightingefficiency (lm/W) Energy Class Packaging
single/multi
30 76300 HMF LED 30 8002219713254 28 4000 >80 80 1800 64 A 1/4
IP65 IK08 850°C
6
LED powered floodlight with aluminium die cast body and technopoly-mer screwable top for quick access to the junction box. Screen is madeof frosted tempered glass to avoid any glaring.Versatility is the great invvovation in this fixture that can be installed sus-pended with steel wires, on wall with an adjustable bracket and onground with a foot base accessory and a single spyke.Its small dimension makes Multibay ideal for both architectural and in-dustrial types of installation.
MultiBay LED 50Multi-function Floodlight
GENERAL SPECIFICATION
Power 50 W
Supply 220/240 VAC - 50/60 Hz
Conformity to EN60598-1; EN60598-2-1; EN 62471
Protection degree IP65
Ambient temp. -20°C +40°C
Mounting Wall, ground, suspended
Body Die cast aluminium (RAL 7040)
Reflector White painted die cast aluminium
Power supply Integrated, Electronic
Power supply PC and fiberglasscompartment
Screen Frosted tempered glass
Life 35000 h ◊
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
150
450
300
600
PART NUMBER 76301
50W
B B1
L
B2
L1 Ø
50 200 204 159 131 170 100 126 1,8
Power • Dimension (mm) • N° Weight kgW Ø B B1 B2 L L1 LEDPart # Description Packaging
- MOUNTING BRACKET 1- TECHNOPOLYMER FOOT BASE 1- SPYKE 1- SUSPENSION WIRE 1
ACCESSORIES - Supplied with
Multy bay 50 REPLACES150W
HALOGEN FLOODLIGHTS
7
MU
LTI-
FUN
CTIO
N
Suspension Wall / Ceiling with adjustable bracket
Ground with spyke Construction site light
MultyBay LED 50W Part # Description EAN code Power
WColourtemp. Ra N°
LEDFlux(lm)
Lightingefficiency (lm/W) Energy Class Packaging
single/multi
50 76301 HMF LED 50 8002219713261 47 4000 >80 126 3250 69 A 1/4
IP65 IK08 850°C
8
LED floodlight with aluminium die cast body and frosted tempered glassfor glare elimination.Versatility is the key feature of this fixture that can be installed suspendedwith steel wires, on wall with an adjustable bracket and on ground witha foot base accessory and a single spyke.Its very high lighting performance allows the installation on ceilings up to10 metres high.
MultiBay LED 100Multi-function Floodlight
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
150
450
300
600
PART NUMBER 76302
100W
B B1
L
B2
L1 Ø
100 305 345 286 205 235 100 150 4,8
Power • Dimension (mm) • N° Weight kgW Ø B B1 B2 L L1 LED
GENERAL SPECIFICATION
Power 100 W
Supply 220/240 VAC - 50/60 Hz
Conformity to EN60598-1; EN60598-2-1; EN 62471;
Protection degree IP65
Ambient temp. -20°C +40°C
Mounting Wall, ground, suspended
Body Die cast aluminium (RAL 7040)
Reflector White painted die cast aluminium
Power supply Integrated, Electronic
Power supply die cast aluminiumcompartment
Screen Frosted tempered glass
Life 35000 h ◊
Part # Description Packaging
- MOUNTING BRACKET 1- TECHNOPOLYMER FOOT BASE 1- SPYKE 1- SUSPENSION WIRE 1
ACCESSORIES - Supplied with
Multy bay 100 REPLACES300W
HALOGEN FLOODLIGHTS
9
MU
LTI-
FUN
CTIO
N
Suspension Wall / Ceiling with adjustable bracket Ground with spyke
MultyBay LED 100W Part # Description Cod. EAN Power
WColourtemp. Ra N°
LEDFlux(lm)
Lightingefficiency (lm/W) Energy Class Packaging
single/multi
100 76302 HMF LED 100 8002219713278 105 4000 >80 150 6800 62 A 1/2
Power SEF LED REPLACES
10
Power Save Energy Flood LED is a revolutionary outdoor floodlight withtechnopolymer body and aluminium heatsink.The "Quick" junction Box, placed on the outer side of the body, offers afast connection system to speed up installation.The extruded aluminium heatsink ensures an optimal cooling effectand grants long lifetime and constance of lighting performances tothe fixture.The product is provided with a mounting bracket for installation and lightbeam adjust.
Power SEF LEDOutdoor floodlight
GENERAL SPECIFICATION
Power 10, 20, 30, 50 W
Supply 220/240 VAC - 50/60 Hz
Conformity to EN60598-1; EN60598-2-1; EN 62471;60598-2-5
Protection degree IP65
Ambient temp. -20°C +40°C
Mounting Ground or wall
Body Technopolymer, Pant. warm grey 11C
Reflector Hammered anodized aluminium
Screen Tempered high transparency glass
Power supply Integrated, Electronic
Light source COB LED
Colour temperature 4000K
Life 35000 h ◊
PPALESTRA
10W50W halogen fixtures
20W100W halogen fixtures
30W150W halogen fixtures
50W200W halogen fixtures
L
B
L2
H
L1
10 134 200 56 70 108 0,820 166 220 75 100 136 1,230 179 234 80 100 148 1,650 195 274 95 120 165 2,3
Power • Dimension (mm) • Weight kgW L B H L1 L2
IP65 IK08 850°C
11
FLO
OD
LIG
HT
High efficency heatsink Quick Box fast wiring system
Power SEF LED
W Part # Description EAN code PowerW
Colourtemp. Ra Flux
(lm) Lighting
efficiency (lm/W) Energy Class Packagingsingle/multi
10 8618 POWER SEF LED IP65 10W 4000K 8002219710697 11 4000K >70 900 82 A+ 1/16
20 8619 POWER SEF LED IP65 20W 4000K 8002219710703 20 4000K >70 1950 98 A+ 1/8
30 8620 POWER SEF LED IP65 30W 4000K 8002219710710 32 4000K >70 2950 92 A+ 1/8
50 8621 POWER SEF LED IP65 50W 4000K 8002219710727 52 4000K >70 4500 87 A+ 1/6
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
180
360
270
90
PART NUMBER 8620
30W
12
Save Energy Flood LED is an outdoor floodlight with body made of alu-minium and a polished diffusing reflector.The screen is made of tempered high transparency glass and the junc-tion box allows the wiring of the fixture without disassembling the lightsource compartment. This grants a fast and safe installation without en-dangering the protection degree of the fixture.SEF LED is available also with integrated movement and twilight sensor.
SEF LEDOutdoor floodlight
L
B
L2
H
L1
GENERAL SPECIFICATION
Power 10, 20, 30, 50 W
Supply 220/240 VAC - 50/60 Hz
Conformity to EN60598-1; EN60598-2-1; EN 62471
Protection degree IP65
Ambient temp. -20°C +40°C
Mounting Ground or wall
Body Die cast aluminium (Bright grey RAL 9006)
Reflector Anodized aluminium
Screen Tempered high transparency glass
Power supply Integrated, Electronic
Light source COB LED
Colour temperature 4000K
Life 35000 h ◊
10 114 85 85 60 98 0,520 180 138 104 94 156 1,030 225 185 130 146 200 1,750 283 234 150 140 245 2,6
Power • Dimension (mm) • WeightW L B H L1 L2 kg
PPALESTRAIP65 IK08 950°C
SEF LED REPLACES
10W50W halogen fixtures
20W100W halogen fixtures
30W150W halogen fixtures
50W200W halogen fixtures
13
FLO
OD
LIG
HT
Quick wiring with junction box separated
from the light source compartment
Automtic switching by the movement
and twilight
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
180
360
270
90
PART NUMBER 8616
30W
SEF LED
W Part # Description EAN code PowerW
Colourtemp. Ra Flux
(lm) Lighting
efficiency (lm/W) Energy Class Packagingsingle/multi
10 8614 SEF LED IP65 10W 4000K 8002219506535 11 4000K >70 900 82 A+ 1/16
10 8617 SEF LED IP65 10W 2700K 8002219810250 11 2700K >70 850 77 A+ 1/16
20 8615 SEF LED IP65 20W 4000K 8002219506542 21 4000K >70 1900 90 A+ 1/8
30 8616 SEF LED IP65 30W 4000K 8002219506559 32 4000K >70 2650 83 A+ 1/8
50 8622 SEF LED IP65 50W 4000K 8002219713285 52 4000K >70 4200 81 A+ 1/4
SEF LED SENSOR
W Part # Description EAN code PowerW
Colourtemp. Ra Flux
(lm) Lighting
efficiency (lm/W) Energy Class Packagingsingle/multi
10 8614S SEF LED IP65 10W 4000K SENS 8002219713919 11 4000 >70 900 82 A+ 1/16
10 8617S SEF LED IP65 10W 2700K SENS 8002219713926 11 2700 >70 850 77 A+ 1/16
20 8615S SEF LED IP65 20W 4000K SENS 8002219713933 21 4000 >70 1900 90 A+ 1/8
30 8616S SEF LED IP65 30W 4000K SENS 8002219713940 32 4000 >70 2650 83 A+ 1/8
50 8622S SEF LED IP65 50W 4000K SENS 8002219713957 52 4000 >70 4200 81 A+ 1/4
14
Metal halide outdoor floodlight made of die cast aluminium coloured withpolyester powder (RAL9006).Quick access to the lamp and electrical parts thanks to the tilting frontframe.Overheat protected ballast with three way screw connector.High transparency tempered glass, double parabolic symmetric or asym-metric reflector made of hammered aluminium.The asymmetric light beam generated by the reflector is perfect for build-ing facades lighting.
FloodlightOutdoor floodlight
L B
H
GENERAL SPECIFICATION
Power 70, 150, 250, 400 W
Supply 220/240 VAC - 50/60 Hz
Conformity to EN60598-1, EN60598-2-5
Protection degree IP65
Mounting Ground or wall
Body Die cast aluminium
Reflector Made of anodized and polished hammered aluminium
Glass Tempered, impact and thermal shockresistant
Power supply Inductive with thermal protection
Lampolder Ceramic
Wind exposed 70W - 150W: 0,089m2surface 250W - 400W: 0,16m2
IP65 IK08 950°C
70 265 125 400 MH Rx7s 4,6150 265 125 400 MH Rx7s 5,5250 375 150 510 MH E40 9,5400 375 150 510 MH E40 10
Power • Dimension (mm) • Lamp Socket Weight kgW L B H
Part # Description Packaging
77900 Glass protection grid x 70/150 W 177901 Glass protection grid x 250/400 W 1
ACCESSORIES - to be ordered separately
LampPG 13,5 Nylon cable gland
TYPE OF LAMPHOLDERS
E40 Rx7s
SUPPLIED WITH
PPALESTRA
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
160
320
240
80
PART NUMBER 77001
150W
15
FLO
OD
LIG
HT
MH Floodlight Symmetric Reflector
W Part # Description EAN code PowerW Lamp Socket
Lampcurrent
(A)
Averageflux* (lm)
Lightingefficiency
(lm/W)
Energyclass
Packagingsingle/multi
70 77000 F 70 MH RX7S 230V SMALL SM 8002219585554 80 MH Rx7s 0,98 4400 55 A 1
150 77001 F150 MH RX7S-24 230V SMALL SM 8002219585561 160 MH Rx7s 1,8 7700 48 A 1
250 77002 F 250 MH E40 230V BIG SM 8002219585578 260 MH E40 2,15 11600 45 A 1
400 77003 F 400 MH E40 230V BIG SM 8002219585585 440 MH E40 3,25 20300 46 A 1
* The flux value is measured using the lamp supplied with the fixture
MH Floodlight Asymmetric Reflector
W Part # Description EAN code PowerW Lamp Socket
Lamp current
(A)
Averageflux* (lm)
Lightingefficiency
(lm/W)
Energyclass
Packagingsingle/multi
70 77004 F 70 MH RX7S 230V SMALL AS 8002219585592 80 MH Rx7s 0,98 4500 56 A 1
150 77005 F150 MH RX7S-24 230V SMALL AS 8002219585608 160 MH Rx7s 1,8 8000 50 A 1
250 77006 F 250 MH E40 230V BIG AS 8002219585615 260 MH E40 2,15 11150 43 A 1
400 77007 F 400 MH E40 230V BIG AS 8002219585622 440 MH E40 3,25 19490 44 A 1
* The flux value is measured using the lamp supplied with the fixture
16
Versatile and innovative LED light source fixture. Ultra-thin and lowweight, can be installed as a suspended light fitting also in high archi-tectural standard environments.When installed recessed in lay over celings, its peculiar frame matchesperfectly the grid structure granting an excellent alignement with theceiling modules.The combination of very high efficency LEDs with the opal diffusingscreen grants an optimal visual comfort in any kind of application: of-fice, school, hotel and shopping mall.An emergency inverter kit, to grant the switching of the fixture in caseof black out, is available as accessory.
PaneLED
GENERAL SPECIFICATION
Power 38 W
Supply 180/250 VAC - 50/60 Hz
Conformity to EN60598-1; EN60598-2-2; EN 62471
Protection degree IP40
UGR <19
Ambient temp. -20°C +40°C
Mounting Recessed (600x600, 300x1200), ceiling, suspension
Frame Aluminium, white colour
Screen PMMA, UV resistant, sel-estinguishing,opal
Power supply Electronic, secured on fixture’s body
Light source LED
Colour temperature 3000K, 4000K
Life 30000 h ◊
600x600 595 595 9 60 3,7300x1200 295 1195 9 60 3,7
Type • Dimension (mm) • Weight kgL B H H1
Part # Description Packaging
- Wires for suspension 2
ACCESSORIES - Supplied with
Part # Description Packaging
70014 SURFACE MOUNT FRAME PANELED -19363 INVERTER LED IP65 AT RM 1, 2, 3 h 1
ACCESSORIES - to be ordered separately
Optics Z Flat opal methacrylate screen.
L
B
H1
H
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
160
320
240
80
PART NUMBER 70011
38W
IP40 IK05 650°C
PaneLED REPLACESFLOURESCENT LIGHTING FIXTURES
4x18W and 2x36W
17
M600
PaneLED
W Part # Description EAN code Assorb.W Module Colour
temp. Ra N°LED
Flux(lm)
Lightingefficiency
(lm/W)Energy class Packaging
single/multi
38 70010 PAN LED 600X600 3000K 8002219713292 40 600x600 3000K >80 108 3000 75 A+ 5
38 70011 PAN LED 600X600 4000K 8002219713308 40 600x600 4000K >80 108 3000 75 A+ 5
38 70012 PAN LED 1200X300 3000K 8002219713315 40 1200x300 3000K >80 108 3000 75 A+ 5
38 70013 PAN LED 1200X300 4000K 8002219713322 40 1200x300 4000K >80 108 3000 75 A+ 5
Suspension Recessed Ceiling Frame kit, part number 70014
18
Recessed installation fixture for M600 modular lay over ceilings.Its reduced thickness (only 69mm) allows the fixture to be suitable alsofor installation in low ceilings gap conditions.White polycarbonate lampholders with phosphorous bronze contactparts.Rigid 0,50mm2 internal wirings and PVC-HT sleeve 105°C resistant ac-cording to CEI 60598-1 norms.2P+G connection block for a 2,5 mm2 maximum section of the wires.
P I SquareRecessed luminaire
GENERAL SPECIFICATION
Power 4x18w, 2x36 W
Supply 220/240 VAC - 50/60 Hz
Conformity to EN60598-1, EN60598-2-2
Protection degree IP20
Mounting M600 recessed, lay over structure
Body White RAL9003 polyester powderpainted steel
Optics Darklight and satin finish (B, J)
Power supply Integrated, Electronic
IP20 960°C
4x18 594 594 69 3,52x36 1195 293 69 3,5
Power • Dimension (mm) • Weight kgW L B H
Part # Description Packaging
19350 Module EcoLED SE 1N RM 1
ACCESSORIES - to be ordered separately
L
H
B
DARKLIGHT T8
Installation on lay over M600 module
Optics B - Mirrorlike low luminance.Darklight low luminance optics made of anodized and polished aluminium blades.Longitudinal and transversal double parabolic blade reflectors. According to productsoptical specification may vary between DKL1, DKL2 and DKL3 as specifified in thedescription of symbols page. Closing clips can be used to hold the optics in place during maintenance.
DKL3DKL2DKL1
Optics J - Satin aluminium with rectangular cells.Rectangular cells optics made with satin aluminium transversal blades and flat longitudi-nal reflectors.Micromirror grooved transversal blades.Closing clips can be used to hold the optics in place during maintenance.
19
M600
I Square
W Part # Description EAN code PowerW Module Lamp Socket Optics Packaging
single/multi
4x18 70201RE INC 418 T8 G13 RE M600 B 8002219584915 62 600x600 T8 G13 B 2
4x18 70202RE INC 418 T8 G13 RE M600 J 8002219584922 62 600x600 T8 G13 J 2
2x36 70001RE INC 236 T8 G13 RE INCASSO B 8002219584830 65 1200x300 T8 G13 B 2
2x36 70002RE INC 236 T8 G13 RE INCASSO J 8002219584847 65 1200x300 T8 G13 J 2
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
140
280
210
70
PART NUMBER 70201RE
4x18W
FLUO T8 - linear fluorescent T8 lamps - TRIPHOSPHOROUS HIGH EFFICIENCY - G13 socketWatt Part # Colour temp. (K) Flux (lm) Lenght (mm) Type Packaging
18
52100 2700 1350 590 TRIMAX -52101 3000 1350 590 TRIMAX -
52102 4000 1350 590 TRIMAX -
52103 6500 1300 590 TRIMAX -
36
52104 2700 3350 1200 TRIMAX -
52105 3000 3350 1200 TRIMAX -
52106 4000 3350 1200 TRIMAX -
52107 6500 3250 1200 TRIMAX -
20
Ceiling mounted fixture suitable also for normally flammable surfaces.White polycarbonate lampholders with phosphorous bronze contactparts.Rigid 0,50mm2 internal wirings and PVC-HT sleeve 105°C resistantaccording to CEI 60598-1 norms.2P+G connection block for a 2,5 mm2 maximum section of the wires.
P SquareSurface mount
GENERAL SPECIFICATION
Power 2x36, 2x58, 4x18 W
Supply 220/240 VAC - 50/60 Hz
Conformity to EN60598-1; EN60598-2-1; CE
Protection degree IP20
Mounting Surface mount
Body White RAL9003 polyester powderpainted steel
Optics Darklight and satin finish (B,J)
Power supply Integrated, Electronic
IP20 960°C
2x36 1221 295 72 1132 220 4,82x58 1535 295 72 1149 220 5,14x18 611 595 72 522 520 4,8
Power • Dimension (mm) • Mounting holes distance Weight kgW L B H A C
Part # Description Packaging
19350 Module EcoLED SE 1N RM 1
ACCESSORIES - to be ordered separately
L
H
B
DARKLIGHT T8
A
C
Optics B - Mirrorlike low luminance.Darklight low luminance optics made of anodized and polished aluminium blades.Longitudinal and transversal double parabolic blade reflectors. According to productsoptical specification may vary between DKL1, DKL2 and DKL3 as specifified in thedescription of symbols page. Closing clips can be used to hold the optics in place during maintenance.
DKL3DKL2DKL1
Optics J - Satin aluminium with rectangular cells.Rectangular cells optics made with satin aluminium transversal blades and flat longitudi-nal reflectors.Micromirror grooved transversal blades.Closing clips can be used to hold the optics in place during maintenance.
21
M600
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
100
200
150
50
PART NUMBER 73101RE
2x58W
FLUO T8 - linear fluorescent T8 lamps - TRIPHOSPHOROUS HIGH EFFICIENCY - G13 socketWatt Part # Colour temp. (K) Flux (lm) Lenght (mm) Type Packaging
18
52100 2700 1350 590 TRIMAX -52101 3000 1350 590 TRIMAX -
52102 4000 1350 590 TRIMAX -
52103 6500 1300 590 TRIMAX -
36
52104 2700 3350 1200 TRIMAX -52105 3000 3350 1200 TRIMAX -
52106 4000 3350 1200 TRIMAX -
52107 6500 3250 1200 TRIMAX -
58
52108 2700 5250 1500 TRIMAX -
52109 3000 5250 1500 TRIMAX -
52110 4000 5250 1500 TRIMAX -
52111 6500 5000 1500 TRIMAX -
P Square
W Part # Description EAN code PowerW Lamp Socket Optics Packaging
single/multi
2x36 73001RE P 236 T8 G13 RE PLAFONE B 8002219584984 65 T8 G13 B 2
2x36 73002RE P 236 T8 G13 RE PLAFONE J 8002219585004 65 T8 G13 J 2
2x58 73101RE P 258 T8 G13 RE PLAFONE B 8002219585073 90 T8 G13 B 2
2x58 73102RE P 258 T8 G13 RE PLAFONE J 8002219585080 90 T8 G13 J 2
4x18 73201RE P 418 T8 G13 RE PLAFONE B 8002219585158 62 T8 G13 B 2
4x18 73202RE P 418 T8 G13 RE PLAFONE J 8002219585165 62 T8 G13 J 2
22
Indoor and outdoor ceiling and wall installation fixture, excellent where abright and diffused lighting is needed.Perfect to light stairs, building entrances, corridors in shopping malls,shops, hotels and restaurants.Full moon can be equipped with incandescent (max 75W), CFL and LEDlight sources with E27 socket.
Full Moon
GENERAL SPECIFICATION
Supply 220/240 VAC - 50/60 Hz
Conformity to EN60598-1; EN60598-2-1
Protection degree IP66
Ambient temp. -20°C +40°C *
Mounting Surface, wall
Body Polycarbonate UV resistant and self estinguishing
Colour grey (RAL 9006), black (9011)
Screen Opal, polycarbonate UV resistant andself estinguishing
* Ambient temperature range is related to thetype of light source used. The publishedrange refers to Beghelli ECOLED lamps.
IP66 850°CIK10
Full Moon
Part # Description EAN code Colour Socket Packagingsingle/multi
MAX 75 75300 WL FM E27 BLACK 8002219503541 Black E27 1/8
MAX 75 75400 WL FM E27 GREY 8002219503596 Grey E27 1/8
Ø H
160
80
Fori di montaggio
300 90 E27 0,8
• Dimension (mm) • Socket Weight kgØ H
Suggested Beghelli E27 lampsWatt Part # Type Colour temp. K Flux lm Watt Part # Type Colour temp. K Flux lm
11
56300 SORPRESA LED 3000 105520
50221 CFL 6500 125056301 SORPRESA LED 4000 1055 50308 CFL 6500 1400
56003 LED 3000 1055
23
50703 CFL 2700 1230
56004 LED 4000 1055 50803 CFL 2700 1600
1256933 LED 3000 1200 50713 CFL 4000 123056934 LED 4000 1200 50813 CFL 4000 1600
20
50702 CFL 2700 1250 50723 CFL 6500 1230
50802 CFL 2700 1400 50823 CFL 6500 1600
50203 CFL 2700 1250
25
50204 CFL 2700 1230
50302 CFL 2700 1400 50309 CFL 2700 1600
50712 CFL 4000 1250 50213 CFL 4000 1230
50812 CFL 4000 1400 50310 CFL 4000 1600
50212 CFL 4000 1250 50222 CFL 6500 1230
50305 CFL 4000 1400 50311 CFL 6500 1600
50722 CFL 6500 1250 70 54904 HALOGREEN 2700 1175
50822 CFL 6500 1400
SORPRESA LED = Anti Black-Out: the LED lamp that switches on automatically in case of mains power interruption
CFL = Compact Fluorescent Lamp - HALOGREEN = High efficiency halogen lamp
Installation holes
24
Watertight wall light fixture, excellent where a bright and diffused lightingis needed.Perfect for lighting stairs, building entrances, corridors in shopping malls,shops, hotels and restaurants.Full moon can be equipped with incandescent (max 75W), CFL and LEDlight sources with E27 socket.
Half Moon
GENERAL SPECIFICATION
Supply 220/240 VAC - 50/60 Hz
Conformity to EN60598-1; EN60598-2-1
Protection degree IP66
Ambient temp. -20°C +40°C *
Mounting Surface, wall
Body Polycarbonate UV resistant and self estinguishing
Colour grey (RAL 9006), black (9011)
Screen Opal, polycarbonate UV resistant andself estinguishing
* Ambient temperature range is related to thetype of light source used. The publishedrange refers to Beghelli ECOLED lamps.
Ø H
160
80
Fori di montaggio
IP66 850°CIK10
300 90 E27 0,8
• Dimension (mm) • Socket Weight kgØ H
Installation holes
25
WA
LL A
ND
CE
ILIN
G
Suggested Beghelli E27 lampsWatt Part # Type Colour temp. K Flux lm Watt Part # Type Colour temp. K Flux lm
11
56300 SORPRESA LED (Anti Black -Out) 3000 1055 20 50822 CFL 6500 125056301 SORPRESA LED (Anti Black -Out) 4000 1055 23 50823 CFL 6500 1400
56003 LED 3000 1055 20 50203 CFL 2700 1230
56004 LED 4000 1055 25 50204 CFL 2700 1600
1256933 LED 3000 1200 20 50212 CFL 4000 123056934 LED 4000 1200 25 50213 CFL 4000 1600
20 50702 CFL 2700 1250 20 50221 CFL 6500 1230
23 50703 CFL 2700 1400 25 50222 CFL 6500 1600
20 50712 CFL 4000 1250 20 50302 CFL 2700 1230
23 50713 CFL 4000 1400 25 50309 CFL 2700 1600
20 50722 CFL 6500 1250 20 50305 CFL 4000 1230
23 50723 CFL 6500 1400 25 50310 CFL 4000 1600
20 50802 CFL 2700 1250 20 50308 CFL 6500 1230
23 50803 CFL 2700 1400 25 50311 CFL 6500 1600
20 50812 CFL 4000 1250 70 54904 HALOGREEN 2700 1175
23 50813 CFL 4000 1400
SORPRESA LED = Anti Black-Out: the LED lamp that switches on automatically in case of mains power interruption
CFL = Compact Fluorescent Lamp
HALOGREEN = High efficiency halogen lamp
Half Moon
Part # Description EAN code Colour Socket Packagingsingle/multi
MAX 75 75316 WL HM E27 BLACK 8002219503589 Black E27 1/8
MAX 75 75416 WL HM E27 GREY 8002219503633 Grey E27 1/8
L
B
H
26
Watertight wall light fixture, excellent where a bright and diffused lightingis needed.Perfect for lighting stairs, building entrances, corridors in shopping malls,shops, hotels and restaurants.Full moon can be equipped with incandescent (max 75W), CFL and LEDlight sources with E27 socket.
Ellips
GENERAL SPECIFICATION
Supply 220/240 VAC - 50/60 Hz
Conformity to EN60598-1; EN60598-2-1
Protection degree IP66
Ambient temp. -20°C +40°C *
Mounting Surface, wall
Body Polycarbonate UV resistant and self estinguishing
Colour grey (RAL 9006), black (9011)
Screen Opal, polycarbonate UV resistant andself estinguishing
* Ambient temperature range is related to thetype of light source used. The publishedrange refers to Beghelli ECOLED lamps.
235 325 94 E27 0,7
• Dimension (mm) • Socket Weight kgL B H
160
80
Fori di montaggio
IP66 850°CIK10
Installation holes
27
WA
LL A
ND
CE
ILIN
G
Suggested Beghelli E27 lampsWatt Part # Type Colour temp. K Flux lm Watt Part # Type Colour temp. K Flux lm
11
56300 SORPRESA LED (Anti Black -Out) 3000 1055 20 50822 CFL 6500 125056301 SORPRESA LED (Anti Black -Out) 4000 1055 23 50823 CFL 6500 1400
56003 LED 3000 1055 20 50203 CFL 2700 1230
56004 LED 4000 1055 25 50204 CFL 2700 1600
1256933 LED 3000 1200 20 50212 CFL 4000 123056934 LED 4000 1200 25 50213 CFL 4000 1600
20 50702 CFL 2700 1250 20 50221 CFL 6500 1230
23 50703 CFL 2700 1400 25 50222 CFL 6500 1600
20 50712 CFL 4000 1250 20 50302 CFL 2700 1230
23 50713 CFL 4000 1400 25 50309 CFL 2700 1600
20 50722 CFL 6500 1250 20 50305 CFL 4000 1230
23 50723 CFL 6500 1400 25 50310 CFL 4000 1600
20 50802 CFL 2700 1250 20 50308 CFL 6500 1230
23 50803 CFL 2700 1400 25 50311 CFL 6500 1600
20 50812 CFL 4000 1250 70 54904 HALOGREEN 2700 1175
23 50813 CFL 4000 1400
SORPRESA LED = Anti Black-Out: the LED lamp that switches on automatically in case of mains power interruption
CFL = Fluorescente Compatta
HALOGREEN = Lampada Alogena ad alta Efficienza
Ellips
Part # Description EAN code Colour Socket Packagingsingle/multi
MAX 75 75308 WL E E27 BLACK 8002219503565 Black E27 1/8
MAX 75 75408 WL E E27 GREY 8002219503619 Grey E27 1/8
Part # Description Packaging
- 2 metal installation clips with screws’ 1- 1500mm power wire 1- 150mm ifixture-to-fixture wire 1
ACCESSORIES - Supplied with
28
Lighting fixture designed for undercabinet and indirect illumination, bothfor professional (shopping malls, shop windows) and domestic use.The use of high efficency LEDs grants very low overall consumption.Available in five different sizes, the fixture is equipped with integratedthrough wiring for continuous row installation which results in an evenlight beam free from black areas between one fixture and the other.No special accessories are needed for the continuous row installation,which is rigid when done head to head between the luminaries or flex-ible when done with the power wire provided in the packaging. The battens, according to the type, can be equipped with or withoutan onboard switch that anyhow acts only on its fixture even when in-stalled in continuous row.
RegLED Eco
L B
H
GENERAL SPECIFICATION
Power 4, 8, 10, 14, 18 W
Supply 220/240 VAC - 50/60 Hz
Conformity to EN60598-1; EN60598-2-1; EN 62471
Protection degree IP40
Ambient temp. -20°C +40°C
Mounting Ceiling, wall, undercabinet
Body White PC
Screen Opal PC
Power supply Integrated, Electronic
Colour temperature 3000K, 4000K
Life 30000 h ◊
IP40 850°C
4 313 22 30 45 40 0,108 573 22 30 22 80 0,1610 873 22 30 18 100 0,2114 1173 22 30 12 140 0,2818 1473 22 30 10 180 0,34
Power • Dimension (mm) • Max N° N° Weight kgW L B H fixtures in row LED
MULTIFUNCTION CONNECTION: TO THEPOWER MAINS OR TO ANOTHER FIXTURE
CONTINUOUS ROW INSTALLATIONWITHOUT LIGHT GAPS
RegLED Eco REPLACES4W 8W FLUORESCENT fixtures8W 13W FLUORESCENT fixtures10W 18W FLUORESCENT fixtures14W 24W FLUORESCENT fixtures18W 28W FLUORESCENT fixtures
POINT OF PURCHASE DISPLAYPart 813.353.000
29
BAT
TE
N
RegLED Eco WITH INTEGRATED SWITCH
W Part # Description EAN code PowerW
Colourtemp. Ra N°
LEDFlux(lm)
Lightingefficiency
(lm/W)Energy class Packaging
single/multi
4 74040 RGL P LED 4W 313MM 3000K I 8002219713339 4 3000K >80 40 300 75 A+ 1/10
4 74041 RGL P LED 4W 313MM 4000K I 8002219713346 4 4000K >80 40 320 80 A+ 1/10
8 74042 RGL P LED 8W 573MM 3000K I 8002219713353 8 3000K >80 80 600 75 A+ 1/10
8 74043 RGL P LED 8W 573MM 4000K I 8002219713360 8 4000K >80 80 640 80 A+ 1/10
10 74044 RGL P LED 10W 873MM 3000K I 8002219713377 9,5 3000K >80 100 750 79 A+ 1/10
10 74045 RGL P LED 10W 873MM 4000K I 8002219713384 9,5 4000K >80 100 800 84 A+ 1/10
14 74046 RGL P LED 14W 1173MM 3000K I 8002219713391 13,5 3000K >80 140 1050 78 A+ 1/10
14 74047 RGL P LED 14W 1173MM 4000K I 8002219713414 13,5 4000K >80 140 1120 83 A+ 1/10
18 74048 RGL P LED 18W 1473MM 3000K I 8002219713421 16,5 3000K >80 180 1350 82 A+ 1/10
18 74049 RGL P LED 18W 1473MM 4000K I 8002219713438 16,5 4000K >80 180 1440 87 A+ 1/10
RegLED Eco WITHOUT INTEGRATED SWITCH
W Part # Description CodiceEAN
PowerW
Colourtemp. Ra N°
LEDFlux(lm)
Lightingefficiency
(lm/W)Energy class Packaging
single/multi
4 74050 RGL P LED 4W 313MM 3000K SI 8002219713339 4 3000K >80 40 300 75 A+ 1/10
4 74051 RGL P LED 4W 313MM 4000K SI 8002219713346 4 4000K >80 40 320 80 A+ 1/10
8 74052 RGL P LED 8W 573MM 3000K SI 8002219713353 7,8 3000K >80 80 600 75 A+ 1/10
8 74053 RGL P LED 8W 573MM 4000K SI 8002219713360 8 4000K >80 80 640 80 A+ 1/10
10 74054 RGL P LED 10W 873MM 3000K SI 8002219713377 9,7 3000K >80 100 750 79 A+ 1/10
10 74055 RGL P LED 10W 873MM 4000K SI 8002219713384 9,7 4000K >80 100 800 84 A+ 1/10
14 74056 RGL P LED 14W 1173MM 3000K SI 8002219713391 13,7 3000K >80 140 1050 78 A+ 1/10
14 74057 RGL P LED 14W 1173MM 4000K SI 8002219713414 13,5 4000K >80 140 1120 83 A+ 1/10
18 74058 RGL P LED 18W 1473MM 3000K SI 8002219713421 16,5 3000K >80 180 1350 82 A+ 1/10
18 74059 RGL P LED 18W 1473MM 4000K SI 8002219713438 16,7 4000K >80 180 1440 87 A+ 1/10
L B
H
30
Fixture with aluminium body, built both for professional (shopping malls,shop windows) and domestic use (garages, kitchens).The use of high efficency LEDs grants very low overall consumption.Available in five different sizes, the fixture is equipped with integratedthrough wiring for continuous row installation.
RegLED Metal
GENERAL SPECIFICATION
Power 6, 10, 15, 20 W
Supply 100/240 VAC - 50/60 Hz
Conformity to EN60598-1; EN60598-2-1; EN 62471
Protection degree IP30
Ambient temp. -20°C +50°C
Mounting Ceiling, wall, undercabinet
Body Extruded aluminium
Screen PC
Power supply Integrated, Electronic
Colour temperature 3000K, 4000K
Life 35000 h ◊
6 300 25 26 2010 600 25 26 1815 900 25 26 1320 1200 25 26 10
Power • Dimension (mm) • Max N°W L B H fixtures in row
Part # Description Packaging
- 2 metal installation clips with screws 1- 1500mm power wire 1- 150mm ifixture-to-fixture wire 1- Connector for continuous row installation 1
ACCESSORIES - Supplied with
Quick connection system with integrated power supply and continuousrow wires: in case of multiple fixtures (even of different lenght) the powersupply is provided by one single wire.Every fixture can be switched on and off indipendently from the others.
MULTIFUNCTION CONNECTION: TO THE POWER MAINS OR TO ANOTHER FIXTURE
Perfect mechanical union without any lenght increase.The connector is completely integrated in the fixtures allowing a perfectmatching of the parts.
OPTIMAL LIGHT LINE CONTINUITY
IP30 850°C
31
BAT
TE
N
RegLED METAL WITH INTEGRATED SWITCH
W Part # Description EAN code PowerW
Colourtemp. Ra Flux
(lm)
Lightingefficiency
(lm/W)Energy class Packaging
single/multi
6 74030 RGL LED 6W 300MM 3000K 8002219508980 6,5 3000K >80 450 69 A 1/10
6 74031 RGL LED 6W 300MM 4000K 8002219508997 6,5 4000K >80 450 69 A 1/10
10 74032 RGL LED 10W 600MM 3000K 8002219509000 11,5 3000K >80 800 70 A 1/10
10 74033 RGL LED 10W 600MM 4000K 8002219509918 11,5 4000K >80 800 70 A 1/10
15 74034 RGL LED 15W 900MM 3000K 8002219710345 16,5 3000K >80 1100 67 A 1/10
15 74035 RGL LED 15W 900MM 4000K 8002219710352 16,5 4000K >80 1100 67 A 1/10
20 74036 RGL LED 20W 1200MM 3000K 8002219710369 21 3000K >80 1400 67 A 1/10
20 74037 RGL LED 20W 1200MM 4000K 8002219710376 21 4000K >80 1400 67 A 1/10
L B
H
32
Reglette T5 is a fluorescent batten for wall, suspension and ceiling in-stallation, even if mounted in direct contact with flammable surfaces (fur-niture included). The connection to mains is done through a connectoron the head. It is possible to link up to 12 luminaries in a single row thanksto the integrated through wiring system.Every fixture has an on-board switch and is supplied with power cablesand continuous row instalaltion head-to-head connector.
REGLETTE T5
GENERAL SPECIFICATION
Power 6, 8, 14, 21, 28, 35 W
Supply 220/240 VAC - 50/60 Hz
Conformity to EN60598-1; EN60598-2-1; CE
Protection degree IP30
Ambient temp. -15°C +40°C
Mounting Different types of installation are possiblethanks to the brackets supplied with thefixture
Body White RAL2003 polycarbonate self estinguishing
Screen PMMA opal
Power supply Integrated, Electronic
T5IP30 650°C
Power • Dimension (mm) • Lamp Weight kgW L B H
Part # Description Packaging
- 150mm connection cable 1- Adaptor for continuous row 1. 2 mounting brackets 1. Power cable 1
ACCESSORIES - Supplied with
Part # Description Packaging
74025 400mm connection cable 1
ACCESSORIES - to be ordered separately
Quick connection system with integrated power supply and continuousrow wires: in case of multiple fixtures (even of different lenght) the powersupply is provided by one single wire.Every fixture can be switched on and off indipendently from the others.
MULTIFUNCTION CONNECTION: TO THE POWER MAINS OR TO ANOTHER FIXTURE
Perfect mechanical union without any lenght increase.The connector is completely integrated in the fixtures allowing a perfectmatching of the parts.
A COUNTINUOUS LINE OF LIGHT
6 269 28 43 T5 -8 345 28 43 T5 -14 606 28 43 T5 -21 905 28 43 T5 -28 1205 28 43 T5 -35 1505 28 43 T5 -
33
BAT
TE
N
REGLETTE T5 WITH INTEGRATED SWITCH
W Part # Description EAN code PowerW
Colourtemp. Ra N°
LEDFlux(lm)
Lightingefficiency
(lm/W)Energy class Packaging
single/multi
6 74006 RGL 6 T5 G5 3000K 8002219589729 5 3000K FD 6W T5 G5 200 40 A 1/30
6 74000 RGL 6 T5 G5 4000K 8002219585189 5 4000K FD 6W T5 G5 200 40 A 1/30
6 74018 RGL 6 T5 G5 6500K 8002219594105 5 6500K FD 6W T5 G5 200 40 A 1/30
8 74007 RGL 8 T5 G5 3000K 8002219589736 7,5 3000K FD 8W T5 G5 273 36 A 1/30
8 74001 RGL 8 T5 G5 4000K 8002219585196 7,5 4000K FD 8W T5 G5 273 36 A 1/30
8 74019 RGL 8 T5 G5 6500K 8002219594112 7,5 6500K FD 8W T5 G5 273 36 A 1/30
14 74008 RGL 14 T5 G5 3000K 8002219589743 13,5 3000K FD 14W T5 G5 1030 76 A+ 1/30
14 74002 RGL 14 T5 G5 4000K 8002219585202 13,5 4000K FD 14W T5 G5 1030 76 A+ 1/30
14 74020 RGL 14 T5 G5 6500K 8002219594129 13,5 6500K FD 14W T5 G5 1030 76 A+ 1/30
21 74009 RGL 21 T5 G5 3000K 8002219589750 20,5 3000K FD 21W T5 G5 1735 85 A+ 1/20
21 74003 RGL 21 T5 G5 4000K 8002219585219 20,5 4000K FD 21W T5 G5 1735 85 A+ 1/20
21 74021 RGL 21 T5 G5 6500K 8002219594136 20,5 6500K FD 21W T5 G5 1735 85 A+ 1/20
28 74010 RGL 28 T5 G5 3000K 8002219589767 27 3000K FD 28W T5 G5 2160 80 A+ 1/20
28 74004 RGL 28 T5 G5 4000K 8002219585226 27 4000K FD 28W T5 G5 2160 80 A+ 1/20
28 74022 RGL 28 T5 G5 6500K 8002219594143 27 6500K FD 28W T5 G5 2160 80 A+ 1/20
35 74011 RGL 35 T5 G5 3000K 8002219589774 34,5 3000K FD 35W T5 G5 2730 79 A+ 1/20
35 74005 RGL 35 T5 G5 4000K 8002219585233 34,5 4000K FD 35W T5 G5 2730 79 A+ 1/20
35 74023 RGL 35 T5 G5 6500K 8002219594150 34,5 6500K FD 35W T5 G5 2730 79 A+ 1/20
34
Downlight for recessed installation with radial LED source. Thanks to theopal diffuser allows an even light distribution without glaring.It is delivered with an indipendent SELV electronic driver and it is availablein two power format, two dimensions and two colour temperatures. An emergency inverter is available to keep the fixture on in case ofblack out.
Downlight LED Flat
Ø
H
H1
B
B1
L
H2
GENERAL SPECIFICATION
Power 13, 20 W
Supply 220/240 VAC - 50/60 Hz
Conformity to EN60598-1; EN60598-2-2; EN 62471
UGR <25
Protection degree IP42 on optical side, IP20 on ballast side
Ambient temp. -20°C +40°C
Mounting Recessed
Body Aluminium, white colour frame
Screen Opal PC
Power supply Elettronico
Colour temperature 3000K, 4000K
Life 35000 h ◊
13 180 165 23 3 170 0,420 235 219 23 3 220 0,7
Power supply driver20 140 45 28
Power • Dimension (mm) • Installation Weight W Ø B H H1 L B1 H2 hole kg
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
160
320
240
80
PART NUMBER 71020
13W
IP42IP20 IK05 650°C
Part # Description Packaging
19363 INVERTER LED IP65 AT RM 1, 2, 3 h 1
ACCESSORIES - to be ordered separately
35
DO
WN
LIG
HT
Downlight LED Flat
W Part # Description EAN code PowerW
Colourtemp. Ra N°
LEDFlux(lm)
Lightingefficiency (lm/W) Energy Class
Packagingsingle/multi
13 71020 DWL LED 163 13W 3000K 8002219710017 13 3000K >80 121 800 61 A 1/10
13 71021 DWL LED 163 13W 4000K 8002219710024 13 4000K >80 121 800 61 A 1/10
20 71022 DWL LED 216 20W 3000K 8002219710383 21,2 3000K >80 202 1500 71 A 1/10
20 71023 DWL LED 216 20W 4000K 8002219710390 21,2 4000K >80 202 1500 71 A 1/10
36
Downlight for recessed installation with LED source. Thanks to the opaldiffuser allows an even light distribution without glaring.It is delivered with an indipendent SELV electronic driver and it is avail-able in two power format, two dimensions and two colour temperatures.An emergency inverter is available to keep the fixture on in case ofblack out.
Downlight LED
GENERAL SPECIFICATION
Power 15, 25 W
Supply 220/240 VAC - 50/60 Hz
Conformity to EN60598-1; EN60598-2-2; EN 62471
UGR <25
Protection degree IP40 on optical side, IP20 on ballast side
Ambient temp. -20°C +40°C
Mounting Recessed
Body Aluminium, white colour frame
Screen Opal PC
Power supply Elettronico
Colour temperature 3000K, 4000K
Life 30000 h ◊
Ø1
H
ØL
B1
H1
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
180
360
270
90
PART NUMBER 71033
25W
15 188 150 85 152÷170 0,4525 240 195 100 200÷222 0,70
Power supply driver140 45 28
Power • Dimension (mm) • Installation Weight W Ø Ø1 H L B1 H1 hole kg
IP40IP20 IK05 650°C
Part # Description Packaging
19363 INVERTER LED IP65 AT RM 1, 2, 3h 1
ACCESSORIES - to be ordered separately
Downlight LED REPLACESFLOURESCENT LIGHTING FIXTURES
2x18W and 2x26W
37
DO
WN
LIG
HT
Downlight LED
W Part # Description EAN code PowerW
Colourtemp. Ra N°
LED
Fluxmedio
(lm)
Lightingefficiency
(lm/W)Energy class Packaging
single/multi
15 71030 DWL LED PW 155 15W 3000K 8002219713407 15 3000K >80 36 1250 83 A+ 1/12
15 71031 DWL LED PW 155 15W 4000K 8002219713445 15 4000K >80 36 1450 97 A+ 1/12
25 71032 DWL LED PW 205 25W 3000K 8002219713469 26 3000K >80 45 1950 75 A+ 1/12
25 71033 DWL LED PW 205 25W 4000K 8002219713483 26 4000K >80 45 2300 89 A+ 1/12
38
Waterproof reflector for suspended mounting.POWER SUPPLY COMPARTMENT: Waterproof polyester powdercoated die-cast aluminium, grey RAL 9006 with access hatch tothe terminal board compartment. Internal electrical auxiliaries trayequipped with safety chain.REFLECTOR: light diffusing, parabolic shape, pressed, anodized andpolished Aluminium reflector. Equipped with tempered glass and anti-fallconnectors.LAMPHOLDER: Ceramic and adjustable into various positions to mod-ify the photometric emission.AUXILIARIES: 230V/50Hz power supply unit equipped with thermal pro-tection and power factor correction. Internal cables insulated in siliconewith fibreglass sheath with section of 1.0 mm2. 2P+earth terminal blockwith maximum sections of wires measuring 2.5 mm2.EQUIPMENT: Silicone rubber gaskets. Steel threaded eyebolt.Available with auxiliary lampholder (AUX) socket E27, for lamps up to500W, mains network and automatic switch offNylon cable gland PG 13.5 provided.CONFORMAL TO REGULATION: EN60598-1
Highbay
H
Ø
GENERAL SPECIFICATION
Power 250, 400 W
Supply 220/240 VAC - 50/60 Hz
Conformity to EN 60598-1, EN 60598-2-1, UNI9554:1989, DIN 18032-3:1997-04
Protection degree IP65
Ambient temp. -20°C ÷ +40°C
Mounting Suspended
Body Die cast aluminium RAL 7039
Optics Parabolic reflector with adjustable lampposition (for intensive or diffusing lightbeam)
Screen Tempered high transparency glass
Power supply Inductive ballast
Part # Description Packaging
12020 Glass protection grid 1
ACCESSORIES -to be ordered separately
250 494 580 MH E40 1 10400 494 580 MH E40 1 10,5
Power • Dimension (mm) • Lamp Socket Packaging WeightW Ø H max kg
IP65 D960°C
PPALESTRAUV-OIL
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
160
320
240
80
PART NUMBER 76001
400W
IK05
39
HIG
HB
AY
Highbay
W Part # Description EAN code PowerW Lamp * Socket Current **
MHAux lamp
socketPackaging
single/multi
250 76000 H 250 MH E40 230V 8002219585493 270 MH E40 2,15 - 1
400 76001 H 400 400W MH E40 230V 8002219585509 440 MH E40 3,25 - 1
250+AUX 76000LA H 250 MH E40 230V L.AUX 8002219588203 270 MH+max 500w E40 + E27 2,15 E27 1
400+AUX 76001LA H 400 400W MH E40 230V L.AUX 8002219588210 440 MH+max 500w E40 + E27 3,25 E27 1* to be ordered separately ** MH lamp current
Index per part number
12020 38
19350 18, 20
19363 16, 34, 36
70001RE 19
70002RE 19
70010 17
70011 17
70012 17
70013 17
70014 16
70201RE 19
70202RE 19
71020 35
71021 35
71022 35
71023 35
71030 37
71031 37
71032 37
71033 37
73001RE 21
73002RE 21
73101RE 21
73102RE 21
73201RE 21
73202RE 21
74000 33
74001 33
74002 33
74003 33
74004 33
74005 33
74006 33
74007 33
74008 33
74009 33
74010 33
74011 33
74018 33
74019 33
74020 33
74021 33
74022 33
74023 33
74025 32
74030 31
74031 31
74032 31
74033 31
74034 31
74035 31
74036 31
74037 31
74040 29
74041 29
74042 29
74043 29
74044 29
74045 29
74046 29
74047 29
74048 29
74049 29
74050 29
74051 29
74052 29
74053 29
74054 29
74055 29
74056 29
74057 29
74058 29
74059 29
75300 22
75308 27
75316 25
75400 22
75408 27
75416 25
76000 39
76000LA 39
76001 39
76001LA 39
76300 5
76301 7
76302 9
77000 15
77001 15
77002 15
77003 15
77004 15
77005 15
77006 15
77007 15
77900 14
77901 14
8614 13
8614S 13
8615 13
8615S 13
8616 13
8616S 13
8617 13
8617S 13
8618 11
8619 11
8620 11
8621 11
8622 13
8622S 13
PART # PAGE PART # PAGE
40