advances in regional geology (sedimentology, sequence and bio-stratigraphy, ... rock physics and ......

ADIPEC 2017

www.adipec.com/cfp

One global industry. One city. One meeting place.

CALL FOR PAPERS

ADIPEC Organised ByConference OrganiserHost City Of�cial Media Partner

Supported By

Host

Dear industry colleagues,

It is with great pleasure that I am able to declare the ADIPEC 2017 call for papers now open. Do not miss your chance to be part of the ADIPEC 2017 experience. I encourage you to submit a technical paper for this year’s conference.

With market conditions beginning to stabilise after a challenging couple of years, there has never been a better time to be part of ADIPEC. Held under the patronage of His Highness Sheikh Khalifa Bin Zayed Al Nahyan, President of the United Arab Emirates, ADIPEC will open its doors to the public from 13 - 16 November 2017. This year’s edition of the show promises to be bigger and better than ever before.

By submitting abstracts for ADIPEC 2017, you have the chance to shape and influence the topics that the industry will be talking about at this year’s event. ADIPEC 2017 is the perfect platform for you to share your knowledge and expertise.

Last year, ADIPEC attracted record numbers of attendees, with over 96,000 people converging on Abu Dhabi to participate in the event. ADIPEC’s prestigious conference was the most successful to date, with more than 750 expert speakers hosting 162 individual conference sessions. From upstream exploration and production technologies, to plant optimisation in the downstream sector, every aspect of the hydrocarbon value chain is analysed, debated and discussed at ADIPEC.

This year, the technical categories for paper proposals are more comprehensive than ever before with three additional categories. Papers will be accepted under the categories of: E&P Geoscience; Unconventional Resources; Field Development; Drilling and Completion Technology, Project Engineering and Management; Operational Excellence; HSE; Gas Technology; People and Talent; Offshore and Marine; IOR/EOR, Production Facilities Technologies; and Petroleum Advanced Analytics.

As a technical expert you are invited to demonstrate a pioneering technology that you have been involved with, an innovative strategy or solution to a particularly challenging problem on which you have worked, or exemplify best practice in an area that could significantly boost performance in the energy sector.

If you have first-hand experience in any of these areas and would like to share your knowledge with the energy sector’s most influential minds, I encourage you to submit your abstracts before 2 May 2017 to be considered to present at the region’s biggest oil and gas event. We look forward to reviewing your submissions.

Yours sincerely,

Ali Khalifa Al ShamsiCEO, Al Yasat Petroleum Operations Company Ltdand Chairman of ADIPEC 2017

LETTER FROM THE CHAIRMAN

WHY SUBMIT A PAPER FOR THE TECHNICAL SESSIONS?

• ADIPEC is home to one of the world’s biggest and most important technical conferences with over 106 technical sessions and 750+ speakers in 2016.

• As a distinguished speaker at ADIPEC, the opportunity to network extends beyond the conference programme, with 2,034+ exhibiting companies on the show floor with whom you can interact.

• Extend your influence as part of an exceptional Technical Programme.• Present your technical knowledge and experience globally to industry colleagues.• Raise your company’s technical profile at a prestigious industry event.

WHY SUBMIT AN ABSTRACT?

135,000GROSS SQM

96,374ATTENDEES

2,034EXHIBITINGCOMPANIES

20NATIONAL OIL COMPANIES

15INTERNATIONAL OIL COMPANIES

25INTERNATIONAL COUNTRY PAVILIONS

ADIPEC 2016 AT A GLANCE

SUBMIT YOUR ABSTRACTS www.adipec.com/cfp

OFFSHORE & MARINE CONFERENCE SESSIONS8

Offshore & Marine Hall 15

MIDDLE EAST PETROLEUM CLUB VIP SESSIONS13

Middle East Petroleum Club Theatre

TECHNICAL SESSIONS106Capital Suites

GLOBAL BUSINESS LEADERS SESSIONS3

Al Maa’red Hall

WOMEN IN ENERGY SESSIONSYOUNG ADIPEC ANNUAL YOUTH FORUM

81

MINISTERIAL SESSIONS2

Al Maa’red HallAl Maa’red Hall

SECURITY IN ENERGY SESSIONS12 Conference Hall APANEL SESSIONS8 Conference Hall A

HSE

IOR/EOR

E&P GEOSCIENCES

DRILLING COMPLETION TECHNOLOGY

GAS TECHNOLOGY

PRODUCTION FACILITIES TECHNOLOGIES

PROJECTS ENGINEERING AND MANAGEMENT

FIELD DEVELOPMENT

UNCONVENTIONAL RESOURCES

OPERATIONAL EXCELLENCE

PEOPLE & TALENTS

OUTDOOR &HEAVY MACHINERY

AL MAA’RED HALL

A

B

162 CONFERENCESESSIONS

EXPERT SPEAKERS750+ CONFERENCE

DELEGATES10,009OPENING CEREMONY, KEYNOTE & FEATURED SPEAKERS1

*

*Based on unique and repeat delegates to all conference sessions

SPEAKING AT ADIPEC

BE PART OF THE PREMIER OIL & GAS EXHIBITION & CONFERENCE

TECHNICAL CATEGORIES FOR2017 PAPER PROPOSALS


Host to 10,009 conference delegates from 85 countries, the 2016 ADIPEC Conference attracted over 700 expert speakers in their field. Growth in delegate numbers has increased year on year from 5,800 in 2013, to 6,828 in 2014, to 8,555 in 2015 and 10,009 in 2016.

With the 2017 call for papers now open, technical professionals have the opportunity to submit abstracts before 2 May, to be considered for the 2017 ADIPEC Conference. ADIPEC is testament to the rising demand for knowledge exchange in the Middle East, Africa & Asian Sub-Continent in our ever-changing energy world.

• E&P Geoscience• Unconventional Resources• Field Development• Drilling and Completion Technology• Project Engineering and Management• Operational Excellence• HSE• Gas Technology• People and Talent• Offshore and Marine• IOR/EOR• Production Facilities Technologies• Petroleum Advanced Analytics

Ali K. Al ShamsiCEOAl Yasat Petroleum Operations Company Ltdand ADIPEC Chairman

Fareed AbdullaSVPADCOand ADIPEC Technical ProgrammeCommittee Chairman

Alain DelaytermozSenior Vice PresidentTotaland Technical Programme CommitteeCo-Chairman

Ali Al RawahiReservoir Development ManagerADCOand Technical Programme CommitteeCo-Chairman

Saif Ahmed AlghfeliCEOADCOand ADIPEC Awards Chairman

Gamal HassanPresidentADH International

Ahmad Saqer Al SuwaidiSVP - Umm Shaif & Nasr FieldADMA-OPCO

Mohamed Al MarzouqiManagerOffshore Reservoir Engineering - EDPADNOC

Dr. Lynn NicksSpecialist, Corporate CommunicationsADNOC

Ibrahim Al AlawiDeputy CEOAlMansoori

Ahmed O. AbdullaCEOBorouge

Salem AshoorPresident and General ManagerBP ME

Guo YueliangCountry Manager UAECNPC

Adil NomanAbu Dhabi PresidentExxonMobil

Vincent RosalesDirector, Middle East BusinessDevelopmentFluor

Guy TennantArea VP–Southern GulfHalliburton

Hiroshi FujiiPresident, CEOJODCO

Oukwang KwonGeneral ManagerKorea National Oil Corp

Ahmed Al KaabiAssistant Undersecretary for PetroleumGas and Mineral ResourcesMinistry of Energy, UAE

Satoshi KurodaGeneral ManagerMitsui & Co. ME Ltd

Sheikh Mansoor Al HamadHead of Business DevelopmentMubadala Petroleum

Aqeel MadhiCEONPCC

Erwin KröllSenior Vice PresidentOMV

Stephen LloydSenior Vice President & GM UAEOXY

Jose PereiraME RepresentativePartex Gas Corporation

Intesaar Al KindyExploration DirectorPetroleum Development Oman

Thomas HochstettlerPresidentPetroleum Institute (PI)

Datuk Mohd Anuar TaibExecutive Vice President & Chief ExecutiveOfficer, UpstreamPETRONAS

Kanit SangwongwanichExecutive Vice President, Engineering &Development GroupPTTEP

Choong Heum ParkManaging DirectorSamsung Engineering

Djamel IdriVice President & General ManagerSchlumberger

Ali Al JanabiCountry Chair Abu DhabiShell

Neri AsklandVice President ME and Country ManagerAbu DhabiStatoil

Hatem NuseibehPresident UAE & Chief RepresentativeTotal

Tony AziziVP Sales and Marketing, ME and N AfricaWeatherford

A. Salim David KhemakhemVice President, Well OperationsZADCO

Hasan El Ali Chairman and FounderZakher Marine International

JP CosseVice Presidentdmg Events – Global Energy

Claire PallenConference Directordmg Events – Global Energy

Christopher HudsonPresidentdmg Events – Global Energy

Michelle BoydDirector - EventsSPE Middle East, North Africa and South Asia

EXECUTIVE COMMITTEE

TECHNICAL CATEGORIES FOR PAPER PROPOSALS


E&P GEOSCIENCE:1. Advances in Regional Geology (Sedimentology, Sequence and Bio-Stratigraphy, Basin and Structural Modelling, etc.)2. New Exploration Plays (Subtle Traps, Deep Plays, Field Satellite Extensions)3. Rock Physics and Geomechanics for Conventional Reservoirs4. Seismic Inversion in Reservoir Modelling5. Advances in Seismic Processing and Acquisition, including Minimisation of Environmental Impacts and Enhancement

of Vertical Resolution to Image Thin Reservoir Zones6. Challenges and Solutions in Exploration and Reservoir Characterisation7. Advances in Formation Evaluation and Petrophysics8. Advances in Reservoir Characterisation (SCAL, RRT, Core Integration, PNM, Digital Rock Physics)9. Faults and Fracture Characterisation, Fault Seal Analysis/DFN Modelling10. Advancement in Real-Time Formation Evaluation Case Studies (Geosteering, Well Placement, Logging Tool Selection)11. Making Better Decisions: Role of Geoscience in Uncertainty Assessment and Risk Management12. Tight Reservoirs, Fracture Characterization and Modelling13. SCAL/DRP and Fluid Rock Interaction14. Integration of Magnetic Resonance (CMR/NMR) Logs, MICP, SCAL, CCA Data in Defining Carbonate Petrophysical

Rock Typing15. New Approaches in Characterisation and Modelling of Complex Reservoirs16. Geostatistics and Static Modelling17. Basin Analysis and Modelling; Source to Migration to Trapment18. Data-Driven Analytics; Applications in G&G19. Examples of New Technology Application in Exploration, Case Studies20. R&D: Geoscience Technology Development and Deployment21. Advances in Dynamic Formation Evaluation22. 4D Seismic in Carbonate Reservoir–Challenges and Opportunities23. Open Hole and Cased Hole Logging24. Petrophysics of Naturally-Fractured Reservoirs25. Dynamic Formation Evaluation26. Emerging Logging Technologies and Interpretation Methods

UNCONVENTIONAL RESOURCES:27. Alternative Fluids for Hydraulic Fracturing28. Fracking Techniques, Plug and Perf and Compartmentalisation

UNCONVENTIONAL GAS:29. An Opportunity for the Middle East?30. Unconventional Gas Exploration and Appraisal in the Middle East31. Unconventional Resource Assessment: Methods to Estimate Gas Volumes in Place and Ultimate Recovery32. Geomechanics, Horizontal Drilling and Hydraulic Fracturing in Shale Gas Plays

UNCONVENTIONAL OIL:33. Unconventional Oil Exploration and Appraisal in the Middle East34. Advances in Understanding of Shale Gas Transport, Recovery Enhancement, and Simulation Modelling35. Geological and Geophysical Characterisation36. Petrophysical Characterisation37. Geomechanics38. Reservoir Modelling39. Horizontal Well Placement40. Fracturing Performance41. Technical and Operational Challenges of Tight Gas and Oil and Shale Gas and Oil

FIELD DEVELOPMENT:42. Challenges of Field Development Plan for Reservoirs under Depletion Mode43. Improve the Condensate Recovery for Rich Gas Reservoirs or Retrograde Gas Reservoirs 44. Challenging Developments: Oil Rims, Marginal Fields, Complex Reservoirs, Paleo Oil45. Development Plan Optimisation of the Reserves and Project Economics46. Integrated Asset Modelling for Oil and Gas Reservoirs: Coupling Surface Facilities with Simulation Models47. Challenges of Gas Injection and Production/Process Optimisation48. New Technologies and Research and Development49. Nitrogen, CO2 Injection for Reservoir Pressure Maintenance and Enhanced Oil Recovery50. Maximising Value from Mature Fields Revitalisation, Redevelopment, and End of Field Life Planning51. Advances in Water Flooding Management (Capturing Learnings from Mature Reservoirs)52. Achieving Exceptional Recovery–Case Studies53. Getting the Most from Reservoir Surveillance, Well Testing, Production Measurement54. Maximising Production–Downtime Management and Well Utilisation55. Reservoir Modelling, Simulation, and History Matching56. Fluid Characterisation, SCAL, and Fluid-Rock Interaction57. Advances in Chemical Flooding, Smart Water Injection58. History Matching–Best Practice59. Complex Well Modelling60. Field Development–Uncertainty Analysis61. New Generation Simulators62. Workflow for Mature Oil Fields63. Well Testing and Production Logging (Fractured Reservoirs with Horizontal Wells)64. Extending the Economic Life of Mature Fields65. Unconventional Gas and Oil Exploration and Appraisal; Achieving the Objectives with Cost Effective Programmes66. Innovative Development Solution for Marginal Fields and Reservoirs67. Data-Driven Analytics; Applications in Reservoir Engineering68. Data-Driven Analytics; Applications in Reservoir Modeling and Reservoir Management69. PVT-Fluid Properties/Sampling70. Downhole Sensing, Flow Monitoring and Control71. Advances in Matrix Acidising of Carbonate Reservoirs72. Crude Price Analysis and Reserves Classification73. Improving Field Performance through Effective Reservoir Surveillance74. Artificial Lift Technology and Applications75. Matured Field Re-Development and Challenges76. Advances in Rigless Well Intervention77. Marginal Field Developments and Optimisations78. Advanced Field Development: Sustainability and Challenges79. CCS and Opportunities for EOR80. EOR (Low Salinity Modelling)81. EOR Project Screening and Planning of Pilot EOR Projects82. EOR Mechanisms83. Low Salinity and Nano Particles, Impact on Displacement Efficiency 84. CO2 Injection85. Nitrogen, CO2 Injection for Reservoir Pressure Maintenance and Enhanced Oil Recovery


DRILLING AND COMPLETION TECHNOLOGY:86. Well Intervention Advances: Innovation in W/L, Coil, Rig, Rigless, Snubbing87. Best Practices in Well Delivery; From Concept to Production88. New Protocols and Technology in Well Control89. Step Change in Drilling Efficiency90. Extended Reach Technology and Beyond MRC91. Real Value of Real-Time Drilling Operations92. Advances in Drilling Bit Technology and Deployment93. Drilling Beyond the Limit94. Rig and Equipment Integrity Management-Best Practices95. Managing Wellbore Stability in Challenging Environments (Reactive Shale, Salt, High Pressure, Low Pressure)96. Advances in Deep Water Drilling Technology97. Advances in Drilling Fluid and Cementing Technology98. Managed Pressure Drilling Advantages vs Under Balance Drilling Application for Sour Fields99. Advances in Multistage Fracturing and Stimulation100. Intelligent Completions: Design, Implementation and Performance101. Well Testing Challenges (Heavy Oil, High Pressure, Sour Gas)102. Latest in Well Integrity Management103. Drilling Waste Management and Zero Discharge Drilling Technology104. Advancements in Rig Equipment Designs105. Artificial Lift/Completion and Management Systems106. Revitalise Well Design Concept to Maximise Performance in Alignment with Drilling Technologies107. Drilling Engineering in Real-Time to Maximise Drilling Performance108. Advanced Drilling Techniques to Develop Gas Resources109. Sand Control and ICD Completion110. Swellbore Integrity and Zonal Isolation111. Cost Optimisation “Doing More with Less” Decommissioning and Well Abandonment

PROJECT ENGINEERING AND MANAGEMENT:112. Challenges Related to Production of Sour Gas from HP/HT Reservoirs113. Engineering, Procurement, Construction, Management: Strategies for Successful Project Execution114. Engineering Design for Optimum Energy Conservation (Efficient Energy Use and Reduced Reliance on Conventional

Sources)115. Challenges of Gas and Oil Mega-Projects: Resource, People, Management, Delivery and Cost Perspectives116. Mitigating Challenges during Commissioning and Start-Up of Gas and Oil Projects117. Realising Strategic/Economic Benefits of Standardisation118. Brownfield Project Challenges, Interfaces, Risks, and Mitigations119. Using the Latest Technology to Improve Facility Performance during Life Cycle120. Realising Opportunities of Smart Field Technology/Automation121. Flow Assurance: Engineering and Project

OPERATIONAL EXCELLENCE:122. Producing from HP/HT Tight Gas: Challenges and Lessons Learnt123. Managing Process Safety throughout the Asset Life Cycle124. Integrating Sustainability into Management Practices125. Managing Process Safety through Effective Integrity Management126. Best Practices in Integrity Management of Safety Critical Systems127. Integrity Inspection: Latest Development, Effective Measurement and Reporting128. Managing Challenges with Asset Life Extension: New Risks, Changing Standards, and Codes129. Integrity Opportunities and Challenges in a Digital World130. Intelligent Diagnostics, to Predict Events and Take Action before they Occur


131. Advances in Metering/Well Testing Technologies132. Innovative Solutions to Overcome Production Constraints (Oil, Gas, and Produced Water Handling)133. Realising a Step-Change in Operating Costs134. Best Practices in Pipeline Management: Design, Inspection, Remnant Life Assessment, and Repair/Replacement135. Management of Change: People, Operations, Equipment136. Managing Aging Facilities137. Collaborative Working to Reach Smarter, Faster Decisions138. Automation of Routine Workflows, with Exception Based Reporting139. Benefits and Challenges of Automation140. Advances in Maintenance Strategies141. Best Practices in Equipment Strategy (Rotating/Static Equipment)142. Achieving “Best in Class” Maintenance Performance143. E&P Data Excellence144. Energy Optimising through Advanced Process Controls145. Water Management146. Flow Assurance: Engineering and Project147. Topsides: New Technologies Driving Cost Down148. Advances in Reliability and Failure Analysis149. Advances in Managing Well Integrity in Low Cost Era

HSE:150. Minimising Environmental Footprint151. New Approaches for Environmental Impact Assessment and Management152. Human Factors in HSE Performance153. Promoting Safety Culture: Change in Mindset154. Effective Concepts for Occupational Health Management155. Managing the Asset Integrity Risks Associated with CO2, H2S and High BWS (Wells and Facilities)156. Integrating Asset Integrity and HSE Management157. Accident Prevention and “Lessons Learned” in Safety (Onshore & Offshore)158. Best Practices in Gas Flaring and Emission Reduction159. Major Accidents Prevention and Lessons Learnt160. Innovation in Environmental Protection

GAS TECHNOLOGY:161. Recent Developments in Gas Processing162. LPG, Chemical Gas, CNG & LNG Production Challenges163. Carbon Capture and Storage Technology–Can CO2 be Overcome Positively?164. Advances in Gas Sweetening and Dehydration165. Efficient Utilisation of Energy in Gas Processing166. Improvements and Advances in Sour Gas Processing167. Improving Compressors/Drivers Availability168. Advances in Centrifugal Gas Compressors169. Metering and Instrumentation (Flow Measurement, Gas Quality Measurement, Technologies)



PEOPLE AND TALENT:170. Building the Next Generation of Petro Technical Professionals171. Leadership Development and Succession Management172. The Value of Diversity as a Workforce Strategy173. Managing Change through Effective Knowledge Management 174. Developing Capability for a Continuous Improvement Culture175. Competency and Professionalism in a Changing Industry176. Cost Effective Training and Development177. Maximising Values of ISH Collaboration with the National Companies178. Effective Nationalisation Strategies179. Developing an Agile Workforce180. Effective Knowledge Management Strategies181. Talent Acquisition Strategies182. Instilling Work Ethics in the Workplace183. Workforce Engagement Strategies

OFFSHORE AND MARINE:184. Drilling and Completion Challenges185. Subsea and Topside Facilities186. Flow Assurance and Operations187. Field Development188. Emerging and Advanced Technologies189. Offshore Vessels and Platforms190. Materials Performance191. Advance in EOR for Offshore Environment192. Integrated Asset Optimisation for Offshore Fields193. Infrastructure, Logistics and Supply Chain

IOR/EOR:194. Chemical Flooding195. Fast Tracking EOR Implementation196. Field Implementation, Surface Facilities and HSE Challenges197. Gas Pressure Maintenance198. Gas Injection/CO2 Flooding199. Microbial EOR200. Miscible Methods

PRODUCTION FACILITIES TECHNOLOGIES:201. Surface and Subsurface Facilities and Pipelines202. Surface and Subsurface Integration and Optimisation203. Multiphase Pumping and Metering204. Corrosion and Erosion205. Advances in Facilities Separation Technologies206. De-Bottlenecking Facilities207. Abandonment/Decommissioning

PETROLEUM ADVANCED ANALYTICS208. Data Acquisition, Control, and Monitoring Systems209. Digital Field210. Data Management and Security211. Automation and Expert Systems212. Big Data Applications213. Artificial Intelligence Applications214. Robotic Data Analysis215. Cross-Discipline Leveraging of Data Mining, Modelling, and Data Analytics216. Data Availability, Integrity, and Access217. Visualization Technology218. Knowledge Capture and Management219. Hardware and Software Choices and Support for Various Needs

CALL FOR PAPER GUIDELINESSUBMISSION DEADLINE 2 MAY 2017

Abstract ContentA proper review of your abstract requires that it contains adequate information on which to make a judgment. Written in English and containing 450 words, paper proposals should include the following:

• Objectives/Scope: Please list the objectives and/or scope of the proposed paper. (25–75 words)

• Methods, Procedures, Process: Briefly explain your overall approach, including your methods, procedures and process. (75–100 words)

• Results, Observations, Conclusions: Please describe the results, observations and conclusions of the proposed paper. (100–200 words)

• Novel/Additive Information: Please explain how this paper will present novel (new) or additive information to the existing body of literature that can be of benefit to and/or add to the state of knowledge in the petroleum industry. (25–75 words)

Technical CategoriesUse the topics to indicate the topic that best describes your paper proposal. A primary choice is required. Paper proposals are evaluated on the basis of the information supplied on the paper proposal form in accordance with the following criteria:

• The proposed paper or eposter must contribute to petroleum technology or be of immediate interest to the oil and gas industry, and should contain significant new knowledge or experience in the oil and gas industry.

• Data in the paper proposal must be technically correct.• The proposed paper or eposter may present information

about equipment and tools to be used in exploration and production. Such paper proposals must show the definite applications and limitations of such equipment and should avoid undue commercialism and extensive use of trade names.

• The substance of the proposed paper or eposter must not have been published previously in trade journals or in other professional or technical journals.

Prior to paper proposal submission, management clearance must be obtained. Any issues concerning clearance should be outlined when the paper proposal is submitted.

CommercialismEnter a title that is concise, yet descriptive of the primary content and application of the proposed paper. SPE has a stated policy against use of commercial trade names, company names, or language that is commercial in tone in the paper title, text or slides. Use of such terms will result in careful scrutiny by the programme committee in evaluating paper proposals and the presence of commercialism in the paper or poster may result in it being withdrawn from the conference programme.

Guidelines for Accepted Paper Proposals• Your paper proposal could be accepted for presentation

in a technical or eposter session.• Authors whose abstracts are accepted will be required to

provide a manuscript of (3000–7000 words) for inclusion in the conference proceedings. SPE operate a “no paper, no podium” policy whereby if a manuscript with the associated forms is not received by the due date, it will be withdrawn from the programme and not allowed to be presented.

• Detailed instructions on the preparation of manuscripts and presentations will be sent to corresponding author of each accepted paper.

• SPE assumes no obligation for expenses by authors for travel, lodging, food, or other incidental expenses.

• Accepted authors will be offered a discounted full conference registration fee.

CopyrightAll authors of papers or eposters presented at the conference will be required to complete and submit a copyright release form to SPE or submit the copyright exemption form where applicable.

Submittal• Obtain the necessary clearance for the proposed paper

from your management.• Submit your paper proposal online. It is critical that all

information requested on the form be provided in full and in the order requested. The deadline is 2 May 2017.

An agreement to present a paper at this SPE conference carries an obligation to participate in the event. Manuscripts will be required. Authors whose paper proposals are accepted will be expected to provide a manuscript for inclusion in the Conference Proceedings. Authors who do not submit a manuscript and the associated forms by the due date will be withdrawn from the programme and not allowed to present.

For more information pertaining abstract submittal and SPE conference policy, please visit: http://www.spe.org/authors/papers.php

Technical and poster presentations for the conference will be selected from paper proposals submitted to the conference programme committee. Early submission is particularly important to ensure that the committee members have ample time to review the paper proposals. Late paper proposals will not be accepted.

The deadline is 2 May 2017.


HOW TO SUBMIT AN ABSTRACT

a) We recommend you submit your abstract online at www.adipec.com/cfp.b) Send an email including complete author and paper information as outlined below and attach your abstract as a Word

document. Send to [email protected] not exceeding 450 words.

Note that the paper proposals must not exceed 450 words, and should highlight the following: Objectives/Scope (25–75 words); Methods, Procedures, Process (75–100 words); Results, Observations, Conclusions (100–200 words); Novel/Additive Information (25–75 words). You must also indicate at least one primary category to which the paper belongs.

If the paper is selected, the information submitted on this form will be published in the onsite programme. SPE will communicate with the corresponding author on all occasions. List authors in the order they should be listed in the programme. In order for authors’ names to appear in the programme, all contact information must be completed.

(All the below fields are mandatory. Incomplete submissions will not be accepted)

ATTACH MAXIMUM 450 WORD PAPER PROPOSAL TO THIS FORM Paper Proposal Deadline: 2 May 2017

Yes No

Yes No

Yes No

ted.

PAPER TITLE __________________________________________________________________________

AUTHOR 1 SPE Member (Member Number: ____________________ ) Date of Birth ______________

First Name ________________________________________________ Last Name _________________________________________

Organisation/University ___________________________________________ Are you a Student?

Are you a Student?

Are you a Student?

No Is this material being submitted elsewhere? Yes

Yes No Has this been previously published or presented at an SPE conference?

Yes No Will your company allow you to present and/or publish all of the information described in your paper proposal?

Please indicate which Technical Category this paper applies to: ___________________________________________________________

IMPORTANT - Uncoded paper proposals will NOT be accepted - please indicate at least one choice

Technical Presentation ePoster Presentation/Alternate* Any

25% 25-50% 50-75% >75%

This paper proposal should be considered for:At the time of this submission, how complete is the work this paper will be based on?

*ePoster presentation may be considered as an alternate in a relevant technical session in the event of a withdrawal of a scheduled paper

Mailing Address ____________________________________________

City _____________________________________________________ State/Province _____________________________________

Job Title ___________________________________________

Job Title ___________________________________________

Job Title ___________________________________________

Zip/Postal Code ____________________________________________ Country ___________________________________________

Telephone _________________________________________________ Fax _______________________________________________

Email ___________________________________________________________________________________________________________________

AUTHOR 2 Corresponding Author

Corresponding Author

SPE Member (Member Number: ____________________ ) Date of Birth ______________


Organisation/University ______________________________________

Mailing Address ____________________________________________



Telephone _________________________________________________ Fax _______________________________________________

Email _______________________________________________________________________________________________________

AUTHOR 3 Corresponding Author SPE Member (Member Number: ____________________ ) Date of Birth ______________


Organisation/University

If there are additional authors, please list their names and contact details on a separate page. In order for authors’ names to appear in the conference brochures, all contact information must be completed.

If yes, please indicate place/date ______________________________________ SPE number assigned ____________________________

______________________________________

Mailing Address ____________________________________________



Telephone _________________________________________________ Fax _______________________________________________

Email _______________________________________________________________________________________________________

Host

2017 CALL FOR PAPERS NOW OPENSUBMISSION DEADLINE 2 MAY 2017

BE PART OF THE PREMIER OIL & GAS EXHIBITION & CONFERENCE

www.adipec.com/cfp

Abstract Title Author Name(s), Company

Objectives/Scope: Please list the objectives and/or scope of the proposed paper. (25-75 words)

Methods, Procedures, Process: Briefly explain your overall approach, including your methods, procedures and process (75-100 words)

Results, Observations, Conclusions: Please describe the results, observations and conclusions of the proposed paper (100-200 words)

Novel/Additive Information: Please explain how this paper will present novel (new) or additive information to the existing body of literature that can be of benefit to and/or add to the state of knowledge in the petroleum industry (25-75 words)

o Recommended online at www.adipec.com/cfp.o Submitted abstract should be of minimum 225 words

and maximum of 450 words.o SUBMISSION DEADLINE 2 MAY 2017.o Email the submission form along with your

abstract to [email protected].

http://www.adipec.com/cfp

mailto:[email protected]

advances in regional geology (sedimentology, sequence and bio-stratigraphy, ... rock physics and ......

Documents