© 2002 eaton corporation. all rights reserved. interface cabling options for 9910-p13 & p14 ups...

© 2002 Eaton Corporation. All rights reserved.

Interface Cabling Options for 9910-P13 & P14 UPS

i5-iSeries and p5-pSeriesand Windows

Selecting Which Interface (Communication) Option is Best for You

2

9910-UPS Training

Interface Cabling Options for P13 & P14 rev 3 - Barry Gruetzmacher – September 2005

Receiving the UPS

UPS will be installed on floor Connections that need to be completed

Power• UPS to utility (mains)

• UPS to Devices

Interface (communications)• UPS to server(s)

3

9910-UPS Training


Getting Acquainted

UPS must installed near devices to be protected• Communication and power connections made at rear of UPS

What a P13 and P141 UPS looks like from the rear

P13

P14

1 P14 includes three (3) IEC-320-C13 toIEC-320-C14 1.8 m power cords

4

9910-UPS Training


Communication Options

Software Suite AS/400 InterfaceApplication CD & Serial Cable Cable

IBM i5/iSeriesServer - X

IBM p5/pSeries, OpenPoweror xSeries Server with SingleSerial (TTY) connection X -

IBM p5/pSeries, OpenPoweror xSeries Server and/or Network(WebServer) connection(UPS as a node) X -

IBM p5/pSeries, OpenPowerwith Logical Partitions (LPARs) Not Supported

5

9910-UPS Training


i5 Interface Overview

To connect the UPS to an i5 you need:

A Powerware-supplied interface cable (labeled 05146792)

An IBM-supplied interface cable (labeled 1827), included with the server

Connect the cables as shown in Figure 1

6

9910-UPS Training


iSeries Interface Overview

To connect the UPS to an iSeries or AS/400 you need:

A Powerware-supplied interface cable (labeled 05146792)

Connect the cable as shown in Figure 2

7

9910-UPS Training


UPS Monitoring on the i5, iSeries and AS/4001. Set the QUPSDLYTIM system value for the UPS monitoring

feature.

2. UPS monitoring is a standard feature of the i5-iSeries-AS/400 operating system. QUPSDLYTIM is a time that tells the system how long to run on UPS power before shutting down. Each system is initially assigned a default value for QUPSDLYTIM. A complete description of QUPSDLYTIM is proved on the AS/400 Information Center

Internet Site at: http://publib.boulder.ibm.com/pubs/html/as400ic2924/info/index.htm Select System Administration and MaintenanceCAUTION

The *NOMAX value tells the AS/400 to use customized shutdown software, and if non is available it will begin shutdown immediately when utility power fails.

8

9910-UPS Training


Serial (TTY) Interface Overview To serially (TTY) connect the UPS to a p5, pSeries, RS/6000,

OpenPower, or other system you need: A Powerware-supplied serial interface cable (labeled 60420064-002 or

124102022), included with the UPS Powerware LanSafe Power Management Software from the Software

Suite CD, included with the UPS

For p5 installations you also need: An IBM-supplied 2-port Asynchronous EIA adapter (FC 5723) installed

(the pSeries does not require an EIA adapter) An IBM-supplied maintenance package 5200-05 for AIX 5.2L V5.2

(APAR IY66260); or, the maintenance package 5300-01 for AIX 5.3L V5.3 (APAR IY62267)

Follow the software installation instructions contained on the Software Suite CD to install LanSafe Software.

Connect the serial cable as shown in Figure 3

9

9910-UPS Training


Serial (TTY) Interface Overview

10

9910-UPS Training


p5 or pSeries with LPARs

The UPS does not support Logical Partitions. LPARs are supported on UPS models 9910-P22, P23, P30, P33, P64 or P65 with the ConnectUPS X-Slot Web/SNMP Card (FC 2934)

11

9910-UPS Training


Completing Start-Up

You have finished the power and connectivity installation process

Continue with Start-up instructions in User’s Manuals

Questions? Contact: The local IBM office supporting your account Eaton Power Quality Global Services

© 2002 eaton corporation. all rights reserved. interface cabling options for 9910-p13 & p14 ups...

Documents