yppour a lication – our solution process...
TRANSCRIPT
SOLUTIONS FOR INVENSYS CONTROL SYSTEMS
YOUR AppLICATION – OUR SOLUTION
OpERATIONAL ExCELLENCE
pROCESS AUTOMATION
INTRINSIC SAFETY INTERFACINgIsolated barriers and zener barriers – DIN rail or termination board mounted – IEC61508 SIL 2/3 approved
SIgNAL CONdITIONINgIsolated switch amplifiers, transmitter power supplies, repeaters, signal converters, and trip amplifiers – IEC61508 SIL 2/3 approved
FIELdbUS INFRASTRUCTUREFOUNDATION fieldbus and PROFIBUS power supplies, diagnostics, and distribution
REMOTE I/O SYSTEMSA range of safe and hazardous area (Division 2 and Zone 1, 2) mounting modular I/O
INdUSTRIAL MONITORS ANd HMI SOLUTIONSPanels PCs and remote monitors as well as operator panels and peripherals like barcode readers
pURgE ANd pRESSURIZATIONPurge and pressurization enclosure solutions for hazardous area Division 2 and Zone 1, 2 locations
CONNECTION ANd CONTROLA wide range of EEx e and EEx d enclosures and control stations in stainless steel, GRP and cast metals
pOwER SUppLIESHigh-integrity power supplies specifically designed for mission-critical applications – N+1 or redundant
wIRELESS NETwORkINgWireless gateways and adapters suitable for hazardous and safe area applications using HART technology
SURgE pROTECTIONSurge protection devices to safeguard the integrity of your entire process
pepperl+Fuchs is the undisputed market leader in intrinsically safe explosion protection components and offers a complete range of customized solutions for hazardous areas and critical applications.
Our solutions are employed in a wide variety of industries and applications including oil and gas, chemical, pharmaceutical, waste water management, power plants, distilleries, and many more. With the most comprehensive range of industrial automation products available today, Pepperl+Fuchs is uniquely qualified to provide professional service, expert support, and unmatched performance – whatever your application might be.
Local technical and commercial service ensures constant support from your initial design throughout the life cycle of your plant. With over 60 years of experience and a distinctive spirit of invention, Pepperl+Fuchs is your reliable partner in the process industry – providing innovative products that pave the way for increased efficiency and safety.
www.invensys.pepperl-fuchs.com
PROTECTING YOUR PROCESS
5 1
8
4
2
6
7
3
PROTECTING YOUR PROCESS
Subject to modifications • Copyright Pepperl+Fuchs • Printed in Germany • Part No. 231314 09/11 01
For over a half century, Pepperl+Fuchs has been continually providing new concepts for the world of process automation. Our company sets standards in quality and innovative technology. We develop, produce and distribute electronic interface modules, Human-Machine Interfaces and hazardous location protection equipment on a global scale, meeting the most demanding needs of industry. Resulting from our world-wide presence and our high flexibility in production and customer service, we are able to individually offer complete solutions – wherever and whenever you need us. We are the recognized experts in our technologies – Pepperl+Fuchs has earned a strong reputation by supplying the world’s largest process industry companies with the broadest line of proven components for a diverse range of applications.
www.pepperl-fuchs.com
pROCESS AUTOMATION – pROTECTINg YOUR pROCESS
Southern/Eastern Europe HeadquartersPepperl+Fuchs s.r.l. Sulbiate (MB) · ItalyTel. +39 039 62921E-Mail: [email protected]
Northern Europe HeadquartersPepperl+Fuchs GB Ltd. Oldham · EnglandTel. +44 161 6336431E-Mail: [email protected]
Southern America HeadquartersPepperl+Fuchs Ltda.São Bernardo do Campo · SP · Brazil Tel. +55 11 4007 1448 E-Mail: [email protected]
worldwide/german Headquarters Pepperl+Fuchs GmbH Mannheim · GermanyTel. +49 621 776 2222E-Mail: [email protected]
North/Central America Headquarters Pepperl+Fuchs Inc. Twinsburg · Ohio · USATel. +1 330 486 0002E-Mail: [email protected]
western Europe & Africa HeadquartersPepperl+Fuchs N.V. Schoten/Antwerp · BelgiumTel. +32 3 6442500E-Mail: [email protected]
Asia pacific HeadquartersPepperl+Fuchs PTE Ltd. SingaporeCompany Registration No. 199003130ETel. +65 6779 9091E-Mail: [email protected]
Middle East/India HeadquartersPepperl+Fuchs M.E (FZE)Dubai · UAETel. +971 4 883 8378E-mail: [email protected]
1
2
3
4
5
6
7
8
SOLUTIONS FOR INVENSYS CONTROL SYSTEMS
proven Interface Technology for Invensys Operations Management “IOM” – FOxbORO, TRICONEx
Intrinsically Safe Communication Module (ISCM)
Realizing New Applications
Isolated barriers guarantee safe, reliable signal transmission between the field device to the Foxboro I/A Series system using INFUSION and Triconex Safety Systems. Pepperl+Fuchsʼ intrinsic safety solutions provide galvanic isolation between signal loops and all power-loops. Pepperl+Fuchs offers the most complete range of space-saving economical products to meet all applications.
Pepperl+Fuchs modular intrinsically safe I/O systems customized for the Foxboro I/A Series system and compatible with FBMs provide a cost-effective seamless integration of the Pepperl+Fuchs I/O modules located in the hazardous area to the Foxboro Control Processors (FCP270 or ZCP270) using InFusion. The ISCM can be installed in Zone 2, Division 2 (ISCM8100) and Zone 1 (ISCM8200), hazardous locations. The solution reduces wiring and installation time, as well as the related cost. It also significantly reduces cabinet space in the control room. The solution offers a complete range of galvanically isolated intrinsically safe I/O modules for analog and discrete signals including HART. The system provides communication module and media redundancy. I/O modules can be hot swapped, and are compatible with the Invensys FDT-based Field Device Manager.
WirelessHART is based on the well-known HART standard that is used by 20 million HART enabled field devices and provides the same advantages. Instead of the 4 ... 20 mA current loop, it transmits the information over the air using a wireless mesh network. WirelessHART not only reduces installation efforts, it also enables completely new applications.
TERMINATION ASSEMbLY –bASE pLATE (ISTA-bp)
TERMINATION bOARd (HICTb/HIdTb)
TERMINATION bOARd FOR HIdMUx2700 (HISHpTb)
TERMINATION bOARd (ISTA ANd ISTA-TR)
pOwER HUb ANd pOwER SUppLY
ISCM8100 FOR ZONE 2 OR 22 OR CLASS I, dIV. 2
AdVANCEd dIAgNOSTIC MOdULE FOR pOwER HUb
ISCM8200 FORZONE 1 OR 21
CAbINET ANd ENCLOSURE SOLUTIONS wIRELESSHARTSEgMENT pROTECTOR FIELdbARRIER
The ISTA-BPs are designed to mount H-System intrinsic safety barriers together with the respective FBM onto the same baseplate. A broad range of modules is available for both analog and discrete input and output signals.
The Fieldbus Termination Assembly (FBTA) is a customized Fieldbus Power Hub for the FBM228 Foxboro fieldbus modules to supply up to eight segments. The power supply modules work in cross-over redundancy for highest availability. They are individually replaceable without tools. The connection to the control processor is established with a Sub-D connector.
The Invensys ISCM is a fully integrated solution ideally suited for greenfield applications as well as plant retrofits and revamps using the existing wiring. HART communication is realized via the HDLC bus. Selected digital and analog output modules are available for SIL2 applications featuring a bus independent hardware shutdown.
Pepperl+Fuchs offers a range of modules to establish a wireless network for connecting individual sensors to a DCS or asset management system by using the proven HART technology. With the WirelessHART Gateway (the network manager), the WirelessHART Adapter (for any 4 … 20 mA field instrument) and the WirelessHART Temperature Converter (for RTDs and TCs), you can establish a convenient wireless communication.
Invensys ISCM applications can be supplied for hazardous areas using enclosures made of stainless steel or glass reinforced polyester to fit all common industrial needs.
The Invensys H-System termination boards consist of 8, 16 or 32 galvanically isolated modules. The solution is suitable for all applications and provides individual SIL2 and SIL3 signal connections for both analog and discrete inputs using an ELCO or 37-pin SUB-D plug connector.
An expert system analyzes the physical layer and offers pointed advice in clear text. This enables precise, planned response and pro-active plant upkeep.
Wide range of HIS panels are available for general-purpose circuits enabling a HART communication connection to the Triconex TRICON™ Safety System. The integral HIS Triconex panels replace the standard ETPs (External Termination Panels) and include HART filtering to ensure reliable HART communications. The ELCO system plug connector allows for standard Triconex interface cables.
Termination boards for Foxboro I/A Series DCS (ISTA) and Triconex Safety System (ISTA-TR) consist of 8 or 16 galvanically isolated K-System modules. The boards offer a compact and robust interface between the different I/O cards and the field devices such as transmitters, sensors and actuators.
Segment Protectors increase fieldbus availability. These FieldConnex interface devices feature an excellent electronic design and can be prewired in an enclosure – tailored to your specific requirements.
FieldBarriers are offered in a modular field junction box system, providing a custom solution for your application.
n Fully integrated FBM baseplate and termination board solution for Foxboro
n DIN rail mounted systemn System plug connector to
control processor FCP/FCMn No additional wiring of
components on baseplaten Reduction of cabinet
space, engineering and installation costs
n Up to eight segmentsn DIN rail mounted systemn Individual cross-redundancy
for highest availabilityn 500 mA in HCD2-* slim-line
(12.5 mm/0.5 inch) power supply modules
n Perfectly integrated into Foxboro I/A Seriesn Proven in-use redundancyn Single-channel, high-integrity, and multichannel compact
I/O modulesn Maximum packing density to minimize the number of
cabinetsn Identical system engineering in all hazardous areasn Marine certified for offshore and floating vessel
applications
n Termination board solution for Triconex and Foxboro
n DIN rail mounted systemn 12.5 mm/0.5 inch width
modules require 30% less cabinet space than competitive solutions
n Low heat and power dissipation
n Expert System preciselydiagnoses segment and installation issues
n Continuous monitoring ofsignal conditions
n Information on long-termchanges using trend analysis
n Efficient troubleshootingquickly pinpoints faults reducing commissioning or repair time
n Reduced engineering and certification costs with complete I/O solutions
n Certified for Zone 1, 2, 21, 22 or Division 2
n Wide range of standard and customized configurations
n Guaranteed consistent superior quality
n Remote parameter setting of field devices
n Monitoring of noncritical measurements and environmental data
n Asset management
n External Termination Panels (ETP) with HART communication interface for Triconex
n DIN rail mounted systemn Reduces cabinet spacen Provides HART
communication signal conditioning, up to 32 HART field devices
n Motherboard solution for Foxboro and Triconex
n DIN rail mounted systemn Easy wiring and installation n Improved label-carrier
design on barriers
n Installation and devices in Zone 2, Class I, Division 2
n 4 to 12 outputs nonincendive (Ex nL) or intrinsically safe (Ex ic)
n Short-circuit protection
n Installation in Zone 1, Division 2
n Devices in Zone 0, Division 1
n Galvanic isolation, short-circuit protection and intrinsic safety
FieldConnex® – Simplify processes
FieldConnex is the fieldbus infrastructure of choice for FOUNDATIONTM fieldbus H1 and PROFIBUS PA. Power supplies, installation technology, and process interfaces make the fieldbus physical layer a manageable asset. The High-Power Trunk concept, the process industry’s de facto standard, maximizes the number of devices per segment and cable distances in any hazardous area. In combination, FieldConnex Power Supplies, FieldBarriers, and Segment Protectors enable the right explosion protection for your process plant – with their availability they support modern-day safety protocols.FieldConnex is the right system to protect and integrate field device data into Foxboro DCS I/A series.
SOLUTIONS FOR INVENSYS CONTROL SYSTEMS
proven Interface Technology for Invensys Operations Management “IOM” – FOxbORO, TRICONEx
Intrinsically Safe Communication Module (ISCM)
Realizing New Applications
Isolated barriers guarantee safe, reliable signal transmission between the field device to the Foxboro I/A Series system using INFUSION and Triconex Safety Systems. Pepperl+Fuchsʼ intrinsic safety solutions provide galvanic isolation between signal loops and all power-loops. Pepperl+Fuchs offers the most complete range of space-saving economical products to meet all applications.
Pepperl+Fuchs modular intrinsically safe I/O systems customized for the Foxboro I/A Series system and compatible with FBMs provide a cost-effective seamless integration of the Pepperl+Fuchs I/O modules located in the hazardous area to the Foxboro Control Processors (FCP270 or ZCP270) using InFusion. The ISCM can be installed in Zone 2, Division 2 (ISCM8100) and Zone 1 (ISCM8200), hazardous locations. The solution reduces wiring and installation time, as well as the related cost. It also significantly reduces cabinet space in the control room. The solution offers a complete range of galvanically isolated intrinsically safe I/O modules for analog and discrete signals including HART. The system provides communication module and media redundancy. I/O modules can be hot swapped, and are compatible with the Invensys FDT-based Field Device Manager.
WirelessHART is based on the well-known HART standard that is used by 20 million HART enabled field devices and provides the same advantages. Instead of the 4 ... 20 mA current loop, it transmits the information over the air using a wireless mesh network. WirelessHART not only reduces installation efforts, it also enables completely new applications.
TERMINATION ASSEMbLY –bASE pLATE (ISTA-bp)
TERMINATION bOARd (HICTb/HIdTb)
TERMINATION bOARd FOR HIdMUx2700 (HISHpTb)
TERMINATION bOARd (ISTA ANd ISTA-TR)
pOwER HUb ANd pOwER SUppLY
ISCM8100 FOR ZONE 2 OR 22 OR CLASS I, dIV. 2
AdVANCEd dIAgNOSTIC MOdULE FOR pOwER HUb
ISCM8200 FORZONE 1 OR 21
CAbINET ANd ENCLOSURE SOLUTIONS wIRELESSHARTSEgMENT pROTECTOR FIELdbARRIER
The ISTA-BPs are designed to mount H-System intrinsic safety barriers together with the respective FBM onto the same baseplate. A broad range of modules is available for both analog and discrete input and output signals.
The Fieldbus Termination Assembly (FBTA) is a customized Fieldbus Power Hub for the FBM228 Foxboro fieldbus modules to supply up to eight segments. The power supply modules work in cross-over redundancy for highest availability. They are individually replaceable without tools. The connection to the control processor is established with a Sub-D connector.
The Invensys ISCM is a fully integrated solution ideally suited for greenfield applications as well as plant retrofits and revamps using the existing wiring. HART communication is realized via the HDLC bus. Selected digital and analog output modules are available for SIL2 applications featuring a bus independent hardware shutdown.
Pepperl+Fuchs offers a range of modules to establish a wireless network for connecting individual sensors to a DCS or asset management system by using the proven HART technology. With the WirelessHART Gateway (the network manager), the WirelessHART Adapter (for any 4 … 20 mA field instrument) and the WirelessHART Temperature Converter (for RTDs and TCs), you can establish a convenient wireless communication.
Invensys ISCM applications can be supplied for hazardous areas using enclosures made of stainless steel or glass reinforced polyester to fit all common industrial needs.
The Invensys H-System termination boards consist of 8, 16 or 32 galvanically isolated modules. The solution is suitable for all applications and provides individual SIL2 and SIL3 signal connections for both analog and discrete inputs using an ELCO or 37-pin SUB-D plug connector.
An expert system analyzes the physical layer and offers pointed advice in clear text. This enables precise, planned response and pro-active plant upkeep.
Wide range of HIS panels are available for general-purpose circuits enabling a HART communication connection to the Triconex TRICON™ Safety System. The integral HIS Triconex panels replace the standard ETPs (External Termination Panels) and include HART filtering to ensure reliable HART communications. The ELCO system plug connector allows for standard Triconex interface cables.
Termination boards for Foxboro I/A Series DCS (ISTA) and Triconex Safety System (ISTA-TR) consist of 8 or 16 galvanically isolated K-System modules. The boards offer a compact and robust interface between the different I/O cards and the field devices such as transmitters, sensors and actuators.
Segment Protectors increase fieldbus availability. These FieldConnex interface devices feature an excellent electronic design and can be prewired in an enclosure – tailored to your specific requirements.
FieldBarriers are offered in a modular field junction box system, providing a custom solution for your application.
n Fully integrated FBM baseplate and termination board solution for Foxboro
n DIN rail mounted systemn System plug connector to
control processor FCP/FCMn No additional wiring of
components on baseplaten Reduction of cabinet
space, engineering and installation costs
n Up to eight segmentsn DIN rail mounted systemn Individual cross-redundancy
for highest availabilityn 500 mA in HCD2-* slim-line
(12.5 mm/0.5 inch) power supply modules
n Perfectly integrated into Foxboro I/A Seriesn Proven in-use redundancyn Single-channel, high-integrity, and multichannel compact
I/O modulesn Maximum packing density to minimize the number of
cabinetsn Identical system engineering in all hazardous areasn Marine certified for offshore and floating vessel
applications
n Termination board solution for Triconex and Foxboro
n DIN rail mounted systemn 12.5 mm/0.5 inch width
modules require 30% less cabinet space than competitive solutions
n Low heat and power dissipation
n Expert System preciselydiagnoses segment and installation issues
n Continuous monitoring ofsignal conditions
n Information on long-termchanges using trend analysis
n Efficient troubleshootingquickly pinpoints faults reducing commissioning or repair time
n Reduced engineering and certification costs with complete I/O solutions
n Certified for Zone 1, 2, 21, 22 or Division 2
n Wide range of standard and customized configurations
n Guaranteed consistent superior quality
n Remote parameter setting of field devices
n Monitoring of noncritical measurements and environmental data
n Asset management
n External Termination Panels (ETP) with HART communication interface for Triconex
n DIN rail mounted systemn Reduces cabinet spacen Provides HART
communication signal conditioning, up to 32 HART field devices
n Motherboard solution for Foxboro and Triconex
n DIN rail mounted systemn Easy wiring and installation n Improved label-carrier
design on barriers
n Installation and devices in Zone 2, Class I, Division 2
n 4 to 12 outputs nonincendive (Ex nL) or intrinsically safe (Ex ic)
n Short-circuit protection
n Installation in Zone 1, Division 2
n Devices in Zone 0, Division 1
n Galvanic isolation, short-circuit protection and intrinsic safety
FieldConnex® – Simplify processes
FieldConnex is the fieldbus infrastructure of choice for FOUNDATIONTM fieldbus H1 and PROFIBUS PA. Power supplies, installation technology, and process interfaces make the fieldbus physical layer a manageable asset. The High-Power Trunk concept, the process industry’s de facto standard, maximizes the number of devices per segment and cable distances in any hazardous area. In combination, FieldConnex Power Supplies, FieldBarriers, and Segment Protectors enable the right explosion protection for your process plant – with their availability they support modern-day safety protocols.FieldConnex is the right system to protect and integrate field device data into Foxboro DCS I/A series.
SOLUTIONS FOR INVENSYS CONTROL SYSTEMS
proven Interface Technology for Invensys Operations Management “IOM” – FOxbORO, TRICONEx
Intrinsically Safe Communication Module (ISCM)
Realizing New Applications
Isolated barriers guarantee safe, reliable signal transmission between the field device to the Foxboro I/A Series system using INFUSION and Triconex Safety Systems. Pepperl+Fuchsʼ intrinsic safety solutions provide galvanic isolation between signal loops and all power-loops. Pepperl+Fuchs offers the most complete range of space-saving economical products to meet all applications.
Pepperl+Fuchs modular intrinsically safe I/O systems customized for the Foxboro I/A Series system and compatible with FBMs provide a cost-effective seamless integration of the Pepperl+Fuchs I/O modules located in the hazardous area to the Foxboro Control Processors (FCP270 or ZCP270) using InFusion. The ISCM can be installed in Zone 2, Division 2 (ISCM8100) and Zone 1 (ISCM8200), hazardous locations. The solution reduces wiring and installation time, as well as the related cost. It also significantly reduces cabinet space in the control room. The solution offers a complete range of galvanically isolated intrinsically safe I/O modules for analog and discrete signals including HART. The system provides communication module and media redundancy. I/O modules can be hot swapped, and are compatible with the Invensys FDT-based Field Device Manager.
WirelessHART is based on the well-known HART standard that is used by 20 million HART enabled field devices and provides the same advantages. Instead of the 4 ... 20 mA current loop, it transmits the information over the air using a wireless mesh network. WirelessHART not only reduces installation efforts, it also enables completely new applications.
TERMINATION ASSEMbLY –bASE pLATE (ISTA-bp)
TERMINATION bOARd (HICTb/HIdTb)
TERMINATION bOARd FOR HIdMUx2700 (HISHpTb)
TERMINATION bOARd (ISTA ANd ISTA-TR)
pOwER HUb ANd pOwER SUppLY
ISCM8100 FOR ZONE 2 OR 22 OR CLASS I, dIV. 2
AdVANCEd dIAgNOSTIC MOdULE FOR pOwER HUb
ISCM8200 FORZONE 1 OR 21
CAbINET ANd ENCLOSURE SOLUTIONS wIRELESSHARTSEgMENT pROTECTOR FIELdbARRIER
The ISTA-BPs are designed to mount H-System intrinsic safety barriers together with the respective FBM onto the same baseplate. A broad range of modules is available for both analog and discrete input and output signals.
The Fieldbus Termination Assembly (FBTA) is a customized Fieldbus Power Hub for the FBM228 Foxboro fieldbus modules to supply up to eight segments. The power supply modules work in cross-over redundancy for highest availability. They are individually replaceable without tools. The connection to the control processor is established with a Sub-D connector.
The Invensys ISCM is a fully integrated solution ideally suited for greenfield applications as well as plant retrofits and revamps using the existing wiring. HART communication is realized via the HDLC bus. Selected digital and analog output modules are available for SIL2 applications featuring a bus independent hardware shutdown.
Pepperl+Fuchs offers a range of modules to establish a wireless network for connecting individual sensors to a DCS or asset management system by using the proven HART technology. With the WirelessHART Gateway (the network manager), the WirelessHART Adapter (for any 4 … 20 mA field instrument) and the WirelessHART Temperature Converter (for RTDs and TCs), you can establish a convenient wireless communication.
Invensys ISCM applications can be supplied for hazardous areas using enclosures made of stainless steel or glass reinforced polyester to fit all common industrial needs.
The Invensys H-System termination boards consist of 8, 16 or 32 galvanically isolated modules. The solution is suitable for all applications and provides individual SIL2 and SIL3 signal connections for both analog and discrete inputs using an ELCO or 37-pin SUB-D plug connector.
An expert system analyzes the physical layer and offers pointed advice in clear text. This enables precise, planned response and pro-active plant upkeep.
Wide range of HIS panels are available for general-purpose circuits enabling a HART communication connection to the Triconex TRICON™ Safety System. The integral HIS Triconex panels replace the standard ETPs (External Termination Panels) and include HART filtering to ensure reliable HART communications. The ELCO system plug connector allows for standard Triconex interface cables.
Termination boards for Foxboro I/A Series DCS (ISTA) and Triconex Safety System (ISTA-TR) consist of 8 or 16 galvanically isolated K-System modules. The boards offer a compact and robust interface between the different I/O cards and the field devices such as transmitters, sensors and actuators.
Segment Protectors increase fieldbus availability. These FieldConnex interface devices feature an excellent electronic design and can be prewired in an enclosure – tailored to your specific requirements.
FieldBarriers are offered in a modular field junction box system, providing a custom solution for your application.
n Fully integrated FBM baseplate and termination board solution for Foxboro
n DIN rail mounted systemn System plug connector to
control processor FCP/FCMn No additional wiring of
components on baseplaten Reduction of cabinet
space, engineering and installation costs
n Up to eight segmentsn DIN rail mounted systemn Individual cross-redundancy
for highest availabilityn 500 mA in HCD2-* slim-line
(12.5 mm/0.5 inch) power supply modules
n Perfectly integrated into Foxboro I/A Seriesn Proven in-use redundancyn Single-channel, high-integrity, and multichannel compact
I/O modulesn Maximum packing density to minimize the number of
cabinetsn Identical system engineering in all hazardous areasn Marine certified for offshore and floating vessel
applications
n Termination board solution for Triconex and Foxboro
n DIN rail mounted systemn 12.5 mm/0.5 inch width
modules require 30% less cabinet space than competitive solutions
n Low heat and power dissipation
n Expert System preciselydiagnoses segment and installation issues
n Continuous monitoring ofsignal conditions
n Information on long-termchanges using trend analysis
n Efficient troubleshootingquickly pinpoints faults reducing commissioning or repair time
n Reduced engineering and certification costs with complete I/O solutions
n Certified for Zone 1, 2, 21, 22 or Division 2
n Wide range of standard and customized configurations
n Guaranteed consistent superior quality
n Remote parameter setting of field devices
n Monitoring of noncritical measurements and environmental data
n Asset management
n External Termination Panels (ETP) with HART communication interface for Triconex
n DIN rail mounted systemn Reduces cabinet spacen Provides HART
communication signal conditioning, up to 32 HART field devices
n Motherboard solution for Foxboro and Triconex
n DIN rail mounted systemn Easy wiring and installation n Improved label-carrier
design on barriers
n Installation and devices in Zone 2, Class I, Division 2
n 4 to 12 outputs nonincendive (Ex nL) or intrinsically safe (Ex ic)
n Short-circuit protection
n Installation in Zone 1, Division 2
n Devices in Zone 0, Division 1
n Galvanic isolation, short-circuit protection and intrinsic safety
FieldConnex® – Simplify processes
FieldConnex is the fieldbus infrastructure of choice for FOUNDATIONTM fieldbus H1 and PROFIBUS PA. Power supplies, installation technology, and process interfaces make the fieldbus physical layer a manageable asset. The High-Power Trunk concept, the process industry’s de facto standard, maximizes the number of devices per segment and cable distances in any hazardous area. In combination, FieldConnex Power Supplies, FieldBarriers, and Segment Protectors enable the right explosion protection for your process plant – with their availability they support modern-day safety protocols.FieldConnex is the right system to protect and integrate field device data into Foxboro DCS I/A series.
SOLUTIONS FOR INVENSYS CONTROL SYSTEMS
YOUR AppLICATION – OUR SOLUTION
OpERATIONAL ExCELLENCE
pROCESS AUTOMATION
INTRINSIC SAFETY INTERFACINgIsolated barriers and zener barriers – DIN rail or termination board mounted – IEC61508 SIL 2/3 approved
SIgNAL CONdITIONINgIsolated switch amplifiers, transmitter power supplies, repeaters, signal converters, and trip amplifiers – IEC61508 SIL 2/3 approved
FIELdbUS INFRASTRUCTUREFOUNDATION fieldbus and PROFIBUS power supplies, diagnostics, and distribution
REMOTE I/O SYSTEMSA range of safe and hazardous area (Division 2 and Zone 1, 2) mounting modular I/O
INdUSTRIAL MONITORS ANd HMI SOLUTIONSPanels PCs and remote monitors as well as operator panels and peripherals like barcode readers
pURgE ANd pRESSURIZATIONPurge and pressurization enclosure solutions for hazardous area Division 2 and Zone 1, 2 locations
CONNECTION ANd CONTROLA wide range of EEx e and EEx d enclosures and control stations in stainless steel, GRP and cast metals
pOwER SUppLIESHigh-integrity power supplies specifically designed for mission-critical applications – N+1 or redundant
wIRELESS NETwORkINgWireless gateways and adapters suitable for hazardous and safe area applications using HART technology
SURgE pROTECTIONSurge protection devices to safeguard the integrity of your entire process
pepperl+Fuchs is the undisputed market leader in intrinsically safe explosion protection components and offers a complete range of customized solutions for hazardous areas and critical applications.
Our solutions are employed in a wide variety of industries and applications including oil and gas, chemical, pharmaceutical, waste water management, power plants, distilleries, and many more. With the most comprehensive range of industrial automation products available today, Pepperl+Fuchs is uniquely qualified to provide professional service, expert support, and unmatched performance – whatever your application might be.
Local technical and commercial service ensures constant support from your initial design throughout the life cycle of your plant. With over 60 years of experience and a distinctive spirit of invention, Pepperl+Fuchs is your reliable partner in the process industry – providing innovative products that pave the way for increased efficiency and safety.
www.invensys.pepperl-fuchs.com
PROTECTING YOUR PROCESS
5 1
8
4
2
6
7
3
PROTECTING YOUR PROCESS
Subject to modifications • Copyright Pepperl+Fuchs • Printed in Germany • Part No. 231314 09/11 01
For over a half century, Pepperl+Fuchs has been continually providing new concepts for the world of process automation. Our company sets standards in quality and innovative technology. We develop, produce and distribute electronic interface modules, Human-Machine Interfaces and hazardous location protection equipment on a global scale, meeting the most demanding needs of industry. Resulting from our world-wide presence and our high flexibility in production and customer service, we are able to individually offer complete solutions – wherever and whenever you need us. We are the recognized experts in our technologies – Pepperl+Fuchs has earned a strong reputation by supplying the world’s largest process industry companies with the broadest line of proven components for a diverse range of applications.
www.pepperl-fuchs.com
pROCESS AUTOMATION – pROTECTINg YOUR pROCESS
Southern/Eastern Europe HeadquartersPepperl+Fuchs s.r.l. Sulbiate (MB) · ItalyTel. +39 039 62921E-Mail: [email protected]
Northern Europe HeadquartersPepperl+Fuchs GB Ltd. Oldham · EnglandTel. +44 161 6336431E-Mail: [email protected]
Southern America HeadquartersPepperl+Fuchs Ltda.São Bernardo do Campo · SP · Brazil Tel. +55 11 4007 1448 E-Mail: [email protected]
worldwide/german Headquarters Pepperl+Fuchs GmbH Mannheim · GermanyTel. +49 621 776 2222E-Mail: [email protected]
North/Central America Headquarters Pepperl+Fuchs Inc. Twinsburg · Ohio · USATel. +1 330 486 0002E-Mail: [email protected]
western Europe & Africa HeadquartersPepperl+Fuchs N.V. Schoten/Antwerp · BelgiumTel. +32 3 6442500E-Mail: [email protected]
Asia pacific HeadquartersPepperl+Fuchs PTE Ltd. SingaporeCompany Registration No. 199003130ETel. +65 6779 9091E-Mail: [email protected]
Middle East/India HeadquartersPepperl+Fuchs M.E (FZE)Dubai · UAETel. +971 4 883 8378E-mail: [email protected]
1
2
3
4
5
6
7
8
SOLUTIONS FOR INVENSYS CONTROL SYSTEMS
YOUR AppLICATION – OUR SOLUTION
OpERATIONAL ExCELLENCE
pROCESS AUTOMATION
INTRINSIC SAFETY INTERFACINgIsolated barriers and zener barriers – DIN rail or termination board mounted – IEC61508 SIL 2/3 approved
SIgNAL CONdITIONINgIsolated switch amplifiers, transmitter power supplies, repeaters, signal converters, and trip amplifiers – IEC61508 SIL 2/3 approved
FIELdbUS INFRASTRUCTUREFOUNDATION fieldbus and PROFIBUS power supplies, diagnostics, and distribution
REMOTE I/O SYSTEMSA range of safe and hazardous area (Division 2 and Zone 1, 2) mounting modular I/O
INdUSTRIAL MONITORS ANd HMI SOLUTIONSPanels PCs and remote monitors as well as operator panels and peripherals like barcode readers
pURgE ANd pRESSURIZATIONPurge and pressurization enclosure solutions for hazardous area Division 2 and Zone 1, 2 locations
CONNECTION ANd CONTROLA wide range of EEx e and EEx d enclosures and control stations in stainless steel, GRP and cast metals
pOwER SUppLIESHigh-integrity power supplies specifically designed for mission-critical applications – N+1 or redundant
wIRELESS NETwORkINgWireless gateways and adapters suitable for hazardous and safe area applications using HART technology
SURgE pROTECTIONSurge protection devices to safeguard the integrity of your entire process
pepperl+Fuchs is the undisputed market leader in intrinsically safe explosion protection components and offers a complete range of customized solutions for hazardous areas and critical applications.
Our solutions are employed in a wide variety of industries and applications including oil and gas, chemical, pharmaceutical, waste water management, power plants, distilleries, and many more. With the most comprehensive range of industrial automation products available today, Pepperl+Fuchs is uniquely qualified to provide professional service, expert support, and unmatched performance – whatever your application might be.
Local technical and commercial service ensures constant support from your initial design throughout the life cycle of your plant. With over 60 years of experience and a distinctive spirit of invention, Pepperl+Fuchs is your reliable partner in the process industry – providing innovative products that pave the way for increased efficiency and safety.
www.invensys.pepperl-fuchs.com
PROTECTING YOUR PROCESS
5 1
8
4
2
6
7
3
PROTECTING YOUR PROCESS
Subject to modifications • Copyright Pepperl+Fuchs • Printed in Germany • Part No. 231314 09/11 01
For over a half century, Pepperl+Fuchs has been continually providing new concepts for the world of process automation. Our company sets standards in quality and innovative technology. We develop, produce and distribute electronic interface modules, Human-Machine Interfaces and hazardous location protection equipment on a global scale, meeting the most demanding needs of industry. Resulting from our world-wide presence and our high flexibility in production and customer service, we are able to individually offer complete solutions – wherever and whenever you need us. We are the recognized experts in our technologies – Pepperl+Fuchs has earned a strong reputation by supplying the world’s largest process industry companies with the broadest line of proven components for a diverse range of applications.
www.pepperl-fuchs.com
pROCESS AUTOMATION – pROTECTINg YOUR pROCESS
Southern/Eastern Europe HeadquartersPepperl+Fuchs s.r.l. Sulbiate (MB) · ItalyTel. +39 039 62921E-Mail: [email protected]
Northern Europe HeadquartersPepperl+Fuchs GB Ltd. Oldham · EnglandTel. +44 161 6336431E-Mail: [email protected]
Southern America HeadquartersPepperl+Fuchs Ltda.São Bernardo do Campo · SP · Brazil Tel. +55 11 4007 1448 E-Mail: [email protected]
worldwide/german Headquarters Pepperl+Fuchs GmbH Mannheim · GermanyTel. +49 621 776 2222E-Mail: [email protected]
North/Central America Headquarters Pepperl+Fuchs Inc. Twinsburg · Ohio · USATel. +1 330 486 0002E-Mail: [email protected]
western Europe & Africa HeadquartersPepperl+Fuchs N.V. Schoten/Antwerp · BelgiumTel. +32 3 6442500E-Mail: [email protected]
Asia pacific HeadquartersPepperl+Fuchs PTE Ltd. SingaporeCompany Registration No. 199003130ETel. +65 6779 9091E-Mail: [email protected]
Middle East/India HeadquartersPepperl+Fuchs M.E (FZE)Dubai · UAETel. +971 4 883 8378E-mail: [email protected]
1
2
3
4
5
6
7
8