wwt in cromwell, connecticut, usa
DESCRIPTION
The Mattabassett district wastewater treatment facility. By Stephen Schneider December 11, 2007. WWT in Cromwell, Connecticut, USA. Location. Located half way between New York City and Boston, on the Connecticut river. Location. Location. It is located 40km f r om the Long Island Sound. - PowerPoint PPT PresentationTRANSCRIPT
WWT in Cromwell, Connecticut, USA
The Mattabassett district wastewater treatment facility.
By Stephen SchneiderDecember 11, 2007
Located half way between New York City and Boston,on the Connecticut river.
Location
Location
It is located 40km from the Long Island Sound.
Location
It is still close enough to the shore to still be tidal, but is fresh water.17 billion gallon per day flow. (750 m3/s).The effluent from the plant is 40m from the shore 3m below the surface.
C.T. river information:
Treatment plant specifications
What goes in:18 million gallons per day (0.8 m3/s) from 120,000 residents in: New Britain, Berlin, and Cromwell.$6.4 million USD per year = 115 million kc per yearThe plant can also accept and treat septage from septic tank cleaning trucks and liquid biosolids from other waste water treatment plants.
What goes out:8 to 10 mg/L total nitrogen resulting in a yearly nitrogen credit bill of only $5000 USD.
Main W.W. path:1) Bar racks2) Detritors3) Primary clarifiers4) Aeration tanks5) Secondary clarifiers6) Chlorine disinfection
Sludge paths:
From step 3: (Sludge removal)StorageBelt pressFluidized bed incinerator
From step 5: (Sludge recirculation)Added back in before the primary clarifiers
Layout
Primary clarifiers
Aeration tanks
Primary Clarifiers
Four P.C.s hold the water for 2.5 hours.
Odor control
The air from the liquid treatment processes is sent through a biofilter that consists of a 1 meter thick layer of wood chips.
To date 4.5 million has been spent on odor control.
The odor controls were installed in 1991 to 1994.
I can personally attest to it appearing to have worked having not noticed any smells coming from the plant in recent years, while driving by.
Sludge disposal
After the belt press removes 75% of the water, sludge is incinerated in a fluidized bed incinerator that contains 19 tons of sand at 760°C. In addition to the sludge the incinerator also uses air from near the belt press to reduce odor.
The ash is blown out the top of the incinerator with the exhaust gases. To remove the ash from the air water is used. This resulting water/ash mix is then left in a lagoon to dry and then is sent to a landfill.
Questions?
Resources:mattabassettdistrict.orgwww.redorbit.com/news/science/316877/the_mattabassett_district_regional_wastewater_treatment_plant/
Images:mattabassettdistrict.orgMaps.google.com