work sample - summer 2012 - nina nazarov
DESCRIPTION
Hanging Garden Community Center: academic, Construction Documents: multi-family residential, Reclaim - A wine barrel chair: furniture design & buildTRANSCRIPT
work sample 2012Hanging Garden Community Center | academic
Construction Documents | multi-family residentialReclaim - A wine barrel chair | furniture design & build
Nina Nazarov650 . 888 . 8933 | [email protected] | www.ninanazarov.com
Hanging Garden Community Center | academicConstruction Documents | multi-family residentialReclaim - A wine barrel chair | furniture design & build
Krusmatagade Alle is a street where the south facing side is composed of one-five story brick apartment complex and two story tall colorful row houses, with an empty lot between the two entities. Not only is there a difference in height between the complex and row houses, there is also an offset in plan. The larger urban plan seeks a community center, while this empty lot seeks a sensitive design to bridge the gap between the contextual differences.
Programs Used:Rhino 4.0
Vray for RhinoIllustrator CS3
Photoshop CS3
floor 4
floor 3
floor 2
floor 1 elevation
section
The gesture of the project extends and overlaps the heights of the existing buildings. The intersection of the masses creates the vertical circulation. The southern orientation is ideal for vegetation, enabling the project to not only be a community center, but community kitchen, where the neighborhood can come together over growing their own food, cooking, and sitting down for long - Danish style meals. The street facade is invigorated with the hanging garden and complimentary perforated corten steel. Sunlight, both diffuse and direct, infuse the spaces through the skylight, the garden and the perforated steel.
Scope: AVB Dublin II - 255 unit, 5 story, 316,000 SF multi-family residential, type IIIA wrap around a 6 story Parking Structure. Coordinated & documented construction document sets with engineers, consultants, vendors, & client approval. Created details for exterior and interior conditions. Scheduled finish materials in conjunction with plans & elevations. Implemented innovative solutions.
Programs Used:AutoCAD 2012Adobe Acrobat
Hanging Garden Community Center | academic
Construction Documents | multi-family residentialReclaim - A wine barrel chair | furniture design & build
UNIT A5-B1101
UNIT A1-N1103
UNIT S5-A1107
UNIT A1-A1105
SLOP
E 1.5
% T
YP
SLOP
E 1.5
% T
YP
SLOP
E 1.5
% T
YP
SLOP
E 1.5
%TY
P
4'-4"3'-4"14'-2"3'-4"2'-6"1'-4"3'-4"13'-2"3'-4"3'-6"1'-2 1/4"
3'-4"13'-2"3'-4"4'-4 1/4"2'-0"6'-0"3'-0"
4'-8"
3'-4"
4'-8"
3'-4"
3'-4"
3'-4"
1'-0"
1'-8"
1'-4"
1'-8"
3'-0"
3'-0"
3'-0"
3'-0"
A7.02
5
TYP
UNIT S81128
UNIT A11130
UNIT A51132
2'-8" 3'-1 7/8"
3'-0 1
/2"
4 TREADS @ 11"5 RISERS @ 6.5"
2'-8"5 1/2"
5'-0"
TYP
6"
3'-9"
3'-6"
2'-10
"
3'-9"
3'-9"
3'-6"
3'-9"
3'-9"
3'-9"
3'-6"
2'-10
"
2'-10
"
3'-9"
SLOPE 1.5% TYP
SLOPE 1.5% TYP
SLOPE 1.5% TYP
3'-8" 1'-11"1'-0"4 TREADS @ 11"5 RISERS @ 7"
2'-10 1/2" 8'-11 1/8" 3'-4" 5'-0" 3 7/8" 3'-0 1/8" 10'-7 7/8"
3'-8" 1'-11"1'-0"4 TREADS @ 11"5 RISERS @ 6.6"
3'-4" 5'-0"
1'-11" 13'-9 1/2"1'-0"
5'-0" 3'-4" 12'-11 7/8"
1'-10 3/8"1'-10 3/8"1'-10 3/8"
A7.03
9
A7.02
11
TYP
TYP
2 1/8"
3'-4 3/4"
4'-3 5
/8"
3'-1 1
/2"2 1/2" 3'-
5 1/2"
2'-0"
1'-10"1'-10 3/8" 6"
1'-10"
A7.02
12
TYP
A7.03
4
TYP
A7.03
7
TYP
A7.05
1 A7.02
11
17 17
17
UNITS 1101, 1103, 1105, 1107PATIOS
PLANA3.401/4"=1'-0"
1
UNITS 1101, 1103, 1105, 1107PATIOS
ELEVATIONA3.401/4"=1'-0"
2CAMPBELL GREEN
HA
MLE
T LA
NE
SO
UTH
PLA
ZA
IRONHORSE P
ARKWAY
4
3
LEGEND/ DIMENSIONING
GENERAL NOTESPATIO PLANS PROVIDE THE FOLLOWING INFORMATION:- UNIT NUMBERS- DIMENSIONS- ELEVATION TAGS- SLOPE INFORMATION- DOOR TYPES, SEE UNIT DOOR SCHEDUEL ON SHEET A8.00
A.
SITE BACKGROUND FOR REFERENCE ONLY, SEE CIVIL ANDLANDSCAPE DWGS. CIVIL SHEETS IN PERMIT SUBMITTAL FORREFERENCE ONLY, SEE SITE IMPROVEMENT PERMIT SUBMITTAL.
B.
SEE SHEET A1.00 FOR LEGEND AND DIMENSIONING INFORMATION.
TYPICAL DIMENSIONS ARE TO FACE OF STUD WALL OR FACE OF CMU, U.N.O.CLEAR (CLR) DIMENSIONS ARE TO FACE OF WALL FINISH.
PATIO PLAN LEGEND
1.5% SLOPE
ELEVATION TAG
ACCESSIBLE NOTESWHEN ABRUPT CHANGES IN LEVEL NOT EXCEEDING 1/2"OCCUR, THEY SHALL BE BEVELED WITH A SLOPE NO GREATERTHAN 1:2, EXCEPT THAT LEVEL CHANGES NOT EXCEEDING 1/4"MAY BE VERTICAL.
1.
THE SLOPE AT ALL ACCESSIBLE DOOR, STAIR, AND RAMP LANDINGSSHALL BE 2% MAX.
2.
ALL PASSAGE DOORS TO PROVIDE 18" MIN CLEARANCE ON PULL SIDEOF DOOR.
3.
ALL STAIRS TO PROVIDE 48" CLEAR LANDING, IN THE DIRECTION OFTRAVEL, FOR THE WIDTH OF THE STAIR.
4.
SEE ENLARGED BUILDING PLANS SHEETS A2.11 THRU A2.55 FORWINDOW TYPES, WINDOW DIMENSIONS, AND EXTERIOR WALL TAGS.
C.
SEE UNIT PLANS SHEETS A4.01 THRU A4.20 FOR UNIT WALL TAGS,UNIT WALL DIMENSIONS, AND UNIT DOOR TAGS.
D.
ANGLED WALLS ARE AT 90-DEGREE OR 45-DEGREE ANGLES, UNLESSNOTED OTHERWISE.
E.
54"W x 42"D CLEARANCEAT PULL SIDE OF USER PASSAGE DOOR
DOOR TAG, SEE SHEET A8.001
STAIR TREADS SHALL NOT DEVIATE IN HEIGHT MORE THAN 3/8" PERFLIGHT OF STAIRS. LANDING & STAIRS SHALL NOT SLOPE MORE THAN 2%.
5.
36"W x 42"D CLEARANCEAT PUSH SIDE OF USER PASSAGE DOOR
UNITS 1128, 1130, 1132PATIOS
PLANA3.401/4"=1'-0"
3
UNITS 1128, 1130, 1132PATIOS
ELEVATIONA3.401/4"=1'-0"
4
2
1
UNIT A5-B1101
UNIT A1-N1103
UNIT S5-A1107
UNIT A1-A1105
SLOP
E 1.5
% T
YP
SLOP
E 1.5
% T
YP
SLOP
E 1.5
% T
YP
SLOP
E 1.5
%TY
P
4'-4"3'-4"14'-2"3'-4"2'-6"1'-4"3'-4"13'-2"3'-4"3'-6"1'-2 1/4"
3'-4"13'-2"3'-4"4'-4 1/4"2'-0"6'-0"3'-0"
4'-8"
3'-4"
4'-8"
3'-4"
3'-4"
3'-4"
1'-0"
1'-8"
1'-4"
1'-8"
3'-0"
3'-0"
3'-0"
3'-0"
A7.02
5
TYP
UNIT S81128
UNIT A11130
UNIT A51132
2'-8" 3'-1 7/8"
3'-0 1
/2"
4 TREADS @ 11"5 RISERS @ 6.5"
2'-8"5 1/2"
5'-0"
TYP
6"
3'-9"
3'-6"
2'-10
"
3'-9"
3'-9"
3'-6"
3'-9"
3'-9"
3'-9"
3'-6"
2'-10
"
2'-10
"
3'-9"
SLOPE 1.5% TYP
SLOPE 1.5% TYP
SLOPE 1.5% TYP
3'-8" 1'-11"1'-0"4 TREADS @ 11"5 RISERS @ 7"
2'-10 1/2" 8'-11 1/8" 3'-4" 5'-0" 3 7/8" 3'-0 1/8" 10'-7 7/8"
3'-8" 1'-11"1'-0"4 TREADS @ 11"5 RISERS @ 6.6"
3'-4" 5'-0"
1'-11" 13'-9 1/2"1'-0"
5'-0" 3'-4" 12'-11 7/8"
1'-10 3/8"1'-10 3/8"1'-10 3/8"
A7.03
9
A7.02
11
TYP
TYP
2 1/8"
3'-4 3/4"
4'-3 5
/8"
3'-1 1
/2"2 1/2" 3'-
5 1/2"
2'-0"
1'-10"1'-10 3/8" 6"
1'-10"
A7.02
12
TYP
A7.03
4
TYP
A7.03
7
TYP
A7.05
1 A7.02
11
17 17
17
UNITS 1101, 1103, 1105, 1107PATIOS
PLANA3.401/4"=1'-0"
1
UNITS 1101, 1103, 1105, 1107PATIOS
ELEVATIONA3.401/4"=1'-0"
2CAMPBELL GREEN
HA
MLE
T LA
NE
SO
UTH
PLA
ZA
IRONHORSE P
ARKWAY
4
3
LEGEND/ DIMENSIONING
GENERAL NOTESPATIO PLANS PROVIDE THE FOLLOWING INFORMATION:- UNIT NUMBERS- DIMENSIONS- ELEVATION TAGS- SLOPE INFORMATION- DOOR TYPES, SEE UNIT DOOR SCHEDUEL ON SHEET A8.00
A.
SITE BACKGROUND FOR REFERENCE ONLY, SEE CIVIL ANDLANDSCAPE DWGS. CIVIL SHEETS IN PERMIT SUBMITTAL FORREFERENCE ONLY, SEE SITE IMPROVEMENT PERMIT SUBMITTAL.
B.
SEE SHEET A1.00 FOR LEGEND AND DIMENSIONING INFORMATION.
TYPICAL DIMENSIONS ARE TO FACE OF STUD WALL OR FACE OF CMU, U.N.O.CLEAR (CLR) DIMENSIONS ARE TO FACE OF WALL FINISH.
PATIO PLAN LEGEND
1.5% SLOPE
ELEVATION TAG
ACCESSIBLE NOTESWHEN ABRUPT CHANGES IN LEVEL NOT EXCEEDING 1/2"OCCUR, THEY SHALL BE BEVELED WITH A SLOPE NO GREATERTHAN 1:2, EXCEPT THAT LEVEL CHANGES NOT EXCEEDING 1/4"MAY BE VERTICAL.
1.
THE SLOPE AT ALL ACCESSIBLE DOOR, STAIR, AND RAMP LANDINGSSHALL BE 2% MAX.
2.
ALL PASSAGE DOORS TO PROVIDE 18" MIN CLEARANCE ON PULL SIDEOF DOOR.
3.
ALL STAIRS TO PROVIDE 48" CLEAR LANDING, IN THE DIRECTION OFTRAVEL, FOR THE WIDTH OF THE STAIR.
4.
SEE ENLARGED BUILDING PLANS SHEETS A2.11 THRU A2.55 FORWINDOW TYPES, WINDOW DIMENSIONS, AND EXTERIOR WALL TAGS.
C.
SEE UNIT PLANS SHEETS A4.01 THRU A4.20 FOR UNIT WALL TAGS,UNIT WALL DIMENSIONS, AND UNIT DOOR TAGS.
D.
ANGLED WALLS ARE AT 90-DEGREE OR 45-DEGREE ANGLES, UNLESSNOTED OTHERWISE.
E.
54"W x 42"D CLEARANCEAT PULL SIDE OF USER PASSAGE DOOR
DOOR TAG, SEE SHEET A8.001
STAIR TREADS SHALL NOT DEVIATE IN HEIGHT MORE THAN 3/8" PERFLIGHT OF STAIRS. LANDING & STAIRS SHALL NOT SLOPE MORE THAN 2%.
5.
36"W x 42"D CLEARANCEAT PUSH SIDE OF USER PASSAGE DOOR
UNITS 1128, 1130, 1132PATIOS
PLANA3.401/4"=1'-0"
3
UNITS 1128, 1130, 1132PATIOS
ELEVATIONA3.401/4"=1'-0"
4
2
1
CORR.
CORR.
CORR.
CORR.
CORR.
CORR.
CORR.
CORR.
CORR.
CORR.
CORR.
CORR.
CORR.
CORR.
CORR.
CORR.
CORR.
CORR.
CORR.
CORR.
R1
BUILDING SECTIONSECTIONA6.021/8"=1'-0"
1
BUILDING SECTIONSECTIONA6.021/8"=1'-0"
2
A7.11
1
A7.12
6
A7.11
1
SIMA7.04
6
A7.04
6
TYP
A7.11
1
A7.01
3
A7.01
7
A7.01
9
A7.11
6
A1.211
A1.211
A1.211
A1.219
A1.219
A1.219
R1
R1
WALL SECTION@ HIP ROOF
SECTIONA6.143/8"=1'-0"
1WALL SECTION@ DORMER
SECTIONA6.143/8"=1'-0"
2WALL SECTION@ END OF HIP
SECTIONA6.143/8"=1'-0"
3
GENERAL NOTE: REFER TOSHEET A1.20 & A1.21 FORWALL, FLOOR & ROOF RATING
3 1/2"
3 3/8"
1/2"
METAL DRIP EDGEW/ CONTINUOUS ANCHOR CLEAT
PRESSURE TREATED 1x4 WOODBLOCKING
3'-6 1
/2"
A7.13
5
A7.13
5
11 1/4"
VARIES
EPS TRIM (SEE 3H/A7.05) -ALIGN W/ COPING
EPS TRIM (SEE 3G/A7.05)- BENEATH COPING
10 3/4"
SLOPE1/4" PER FOOT
A7.04
8
A7.04
7
A7.04
9
WALL AT EDGE OFBALCONY
A7.04
11
2"
6 7/8"
A7.05
4
A7.04
2
A7.05
4
2"8"
8"
1'-0"
GSM METAL SADDLEFLASHING BENEATH SASM.SEE DETAIL 1/A7.15 FORSADDLE FLASHING
A7.15
5
R1
R1
R1
R1
R1
R1
1'-2"
1'-2"R1
R1
R1
R1
R1
1A7.04
BALCONY@ EXT. WALL (1 & 2 HOUR)
detail
1 1/2" = 1'-0"
4A7.04
BALCONY ABOVE GRADE@ GUARD RAIL
detail
1 1/2" = 1'-0"
2A7.04
BALCONY ABOVE GRADE@ SIDE WALL
detail
1 1/2"=1'-0"
3A7.04
FIBER CEMENT TRIMABOVE LEVEL 5 BALCONY
detail
1 1/2" = 1'-0"
5A7.04
BALCONY ABOVE GRADE@ GUARD RAIL
detail
1 1/2" = 1'-0"
6A7.04
BALCONY ABOVE GRADE@ BALCONY WALL
detail
1 1/2" = 1'-0"
7A7.04
SCUPPER @ BALCONYABOVE FITNESS CENTER
detail
1 1/2" = 1'-0"
8A7.04
BALCONY W/ SCUPPERABOVE FITNESS CENTER
detail
1 1/2" = 1'-0"
9A7.04
BUILT UP ROOFABOVE FITNESS CENTER
detail
1 1/2" = 1'-0"
11A7.04
METAL COPING TO EPSABOVE FITNESS CENTER
detail
1 1/2" = 1'-0"
2 1/8"
1'-0"
1 5/8"
8 1/2"
3 1/2"
1/2"
1/2"
3"
5 1/2" 5"
1/2"
1"
VARI
ES1/8
"
1/8"
8"7 1
/2"
7 7/8"
1/8"
5/8"
1"
6"5 1
/2"
5 7/8"
1/8"
5/8"
1"
1/2"
1'-2 1
/2" V
IF
3"3"
1'-2 1
/2"5 1
/2"1/2
"
1'-8"
1/2"
1'-8 1
/2"
5"
2"
1'-0"
1/2"
1'-0 1
/2"
1'-0"
2"2"
8 1/2" 8"
1/2"
8"
2"
4"8 7/8"
VIF
1/2"
1 5/8"
1"
7"
1"
7"
1/2"
1'-1"
1'-0 1
/2"
2 1/2" @ STONE1" @ BRICK
3'-9"
AT
IRON
HOR
SE P
ARKW
AY
2'-0"
1'-0"
3' MI
N.,
SEE
ENLA
RGED
PATI
O PL
ANS
9 1/2"
7"2"
A7.15
5 R1
6"
4"4"
4"6"
THIN BRICK, WHEREOCCURS, SEE WALL TYPESON PARTIAL FLOOR PLANS
PORTLAND CEMENT STUCCO ONEXPANDED, SELF FURRINGGALVANIZED METAL LATH
J-MOLD FULLY SOLDEREDWATERTIGHT AROUND SILL & JAMBS
ANCHOR, S.S.D.
5/8" EXTERIOR SHEATHING PER WALL TYPE@ PLANS (ADD LAYER OF FRTW PLYWOODSHEATHING ADJ. TO STUDS @ EXT. SHEAR
WALL WHERE OCCURS, - S.S.D.)
FRTW 2X6 FRAMING
2" M
INLA
P
4" TYP.
MIN 26 GA GSM 2 PIECE COLLARFLASHING. SOLDER EACH PIECEWATERTIGHT
STRIP IN HEAD & JAMBS W/ SELFADHERING FLASHING 10" WIDE
26 GA GSM J-MOLD, FULLY SOLDEREDWATERTIGHT AROUND SILL & JAMBS
SLOPE TOP 10°
HEM EXPOSED EDGE
3" M
IN
1"
R1
EPS TRIMPROFILES
DETAILA7.051 1/2"=1'-0"
3
BRICKPATIO WALL @ SLAB
DETAILA7.051 1/2"=1'-0"
1
SCUPPER @ BALCONYUNIT 2150
DETAILA7.051 1/2"=1'-0"
2
FLASHING @ SIDEWALL@ BALCONY, TYP
DETAILA7.053"=1'-0"
4
GUARDRAIL ATTACHMENT@ BALCONY
DETAILA7.051 1/2"=1'-0"
5
EPS TRIM @ HEADHAMLET & CAMPBELL
DETAILA7.051 1/2"=1'-0"
6
EPS TRIM @ HEADCOURTYARD
DETAILA7.051 1/2"=1'-0"
7
EPS TRIM @ HEAD@ COURTYARD
DETAILA7.051 1/2"=1'-0"
8
EPS TRIM @ JAMBHAMLET & CAMPBELL
DETAILA7.051 1/2"=1'-0"
9
CANOPY & SUNSHADEATTACHMENT
DETAILA7.053"=1'-0"
10
KNIFE PLATE COLLAR FLASHING@ WALL ANCHORAGE
DETAILA7.053"=1'-0"
11
Reclaim is constructed out of a wine barrel. The natural curve of the wood creates an ergonomic seat and backrest. Staves were cut down into modular 1 inch strips to create a snug interlocking fit between the seat and backrest. Metal barrel hoops were deconstructed, predrilled and used to join the 1 inch modular stave strips. Full sized staves are used for the armrests. The base of the chair is an ongoing exploration, currently on the third iteration.
Hanging Garden Community Center | academicConstruction Documents | multi-family residential
Reclaim - A wine barrel chair | furniture design & build
securedownload (JPEG Image, 589x800 pixels) - Scaled (85%) http://209.191.86.118/ya/securedownload?mid=1%5f819616%5fALxWv9EAAJtcSunYJgLek...
1 of 1 10/29/2009 5:12 PM
securedownload (JPEG Image, 589x800 pixels) http://209.191.86.118/ya/securedownload?mid=1%5f820082%5fAL5Wv9EAAUvgSunYQQIM...
1 of 1 10/29/2009 5:11 PM
securedownload (JPEG Image, 589x800 pixels) - Scaled (85%) http://209.191.86.118/ya/securedownload?mid=1%5f820547%5fAL5Wv9EAAUmOSunYVgs...
1 of 1 10/29/2009 5:09 PM
Tools Used:Band Saw | Miter Saw
Belt Sander | Palm SanderClamps
Drill Press | DrillGrinder
A dining room chair, Reclaim is designed to be used as a group of chairs. The high back limits the sight of vision, thus defining is own visual space and creating a space within a space.
Designed and built for the 2009 Vellum Design Competition held by Cal Poly San Luis Obispo, in conjunction with Nature’s Elements Thesis Project. Reclaim won the Cradle to Cradle award for its innovative reuse of material. Scope: To develop marketing material for the Simple, Quick & Affordable Program (SQA). The intension was to build knowledge of the program. The SQA “typicals,” featured below, show furniture configurations that act as idea starters for clients.