Bobcat Attachments Angle BroomAugerBackhoeBrushcatTM Rotary CutterBuckets (4 different styles)ChipperCombination BucketConcrete MixerDiggerDozer BladeDumping HopperEjector BucketFront Scarifier

GraderGrapples and ForksHydraulic Breaker4

Hydraulic Pallet ForkIndustrial GrappleLandplaneLandscape RakePallet ForksPlanerPower RakeSnow BladeSnow BlowerSod Layer

Stump GrinderSuper ScraperSweeperThree Point HitchTillerTilt-TatchTracksTree SpadeTrench CompactorTrencherVibratory RollerWheel Saw (High Flow only)

Bobcat® 873 G-Series Skid-Steer Loader

Rated Operating Capacity1 2400 lb. (1089 kg)Tipping Load 4800 lb. (2177 kg)Hydraulic Pump Capacity 18.7 GPM (70,8 L/min.) High Flow Options 29.0 GPM (109,8 L/min.)Travel Speed 7.9 MPH (12,7 km/hr.)

Length (with bucket) 140.7 in. (3574 mm)Width (with bucket) 74.0 in. (1880 mm)Height 79.0 in. (2007 mm)Height to Bucket Pin 124.3 in. (3158 mm)

Make/Model Deutz/BF4M1011F Turbo-chargedFuel/Cooling Diesel/OilCylinders 4SAE NET HP/Displacement 73.0/178 in.3 (2,92 L)Fuel Tank Capacity 25 gal. (94,6 L)

Operating Weight 7285 lb. (3304 kg)

Steering and Drive Forward, Reverse, Travel Speed and Steering Controlled By Two Hand Levers.Hydraulics Two Foot Pedals (Or Optional Advanced Hand Controls) Raise/Lower Lift Arms

and Dump/Rollback Bucket.Transmission Hydrostatic, Four-Wheel Drive.

Performance 873

Dimensions

Engine

Machine Weight

Operation

Adjustable Cushion SeatAutomatically Activated

Glow PlugsBobcat Interlock Control

System (BICSTM)Bob-Tach

Standard Features

Options/Accessories Advanced Hand ControlsAttachment Control KitBackup AlarmCatalytic PurifierCounterweightDeluxe CabDeluxe Cab w/HeaterDeluxe InstrumentationEngine Shutdown

SPECIFICATIONS

1Operating capacity rated with standard digging bucket according to SAE standardJ818 - OPERATING CAPACITY TO EQUAL NO MORE THAN ONE - HALF THE TIPPING LOAD.

2Bucket positioning helps operator keep the same tilt of the load during lifting.3Includes lexan front door, top and rear windows.4Special application kit (see #3) must be used.NOTE — Where applicable, Dimensions are in accordance with Society of AutomotiveEngineers (SAE) standards. • Specifications and design are subject to change withoutnotice. • Pictures of Bobcat skid-steer loaders may show other than standard equipment.• All dimensions are shown in inches. • Respective metric dimensions are enclosed byparentheses. Melroe Company complies with the requirements of ISO 9001 as registeredwith BSI.

Parking BrakeSeat Bar (available for all Bobcat skid-steer loaders)Seat Belt12-16.5 Bobcat Heavy Duty TiresTurbo-Charger (Approved Spark Arrestor)

Dual Path Cooling SystemLift Arm SupportMeters/Gauges/

Warning LightsOperator Cab

Flasher/Strobe/Rotating Beacon LightsFront Auxiliary HydraulicsFront & Rear LightsHigh Flow Auxiliary

Hydraulics PackageHornHydraulic Bucket

Positioning2

Keyless Start System

A - 12 -16.5 Tires - 72.0 in. (1829 mm)31 -15.5 x 15 Tires - 78.2 in. (1986 mm)

B - 12 -16.5 Tires - 59.2 in. (1503 mm)31 - 15.5 x 15 Tires - 62.7 in. (1593 mm)

C - 74 in. Bucket Width - 74.0 in. (1880 mm)80 in. Bucket Width - 80.0 in. (2032 mm)

2400 LB.Rated Operating Capacity

124.3 IN.Lift Height

73 HPTurbo-Charged, Oil-Cooled Diesel Engine

LIFT MORE.WORK FASTER. RIDE SMOOTHER.

The Bobcat 873 G-Series is a natural for working inconstruction, landscape, nursery, masonary, concrete,ag and many other applications.

With 2,400 lb. of lift, the 873 can easily handle big loadslike pallets of sod, brick or cement blocks. And with itsvertical lift path design, a reach of almost 40 inches anda lift height of almost 10.5 feet, the 873 makes loadingtrucks fast and effortless.

The heart of all this 4-wheel drive power is the 73-hpturbo-charged, oil-cooled Deutz diesel engine. A 18.7gpm pump at 3,000 psi generates plenty of hydraulicpower for operating attachments like augers, landscaperakes, tillers, breakers and more.

The frosting on the cake is the 873’s extended, 48.8-inchwheelbase, which produces a smooth, operator-friendlyride with a brisk travel speed of 7.9 mph. All this in acompact loader that’s only 79 inches high, 74 incheswide, 140.7 inches long with bucket, and weighs just7,285 lb.

But there’s more. The 873 is comfortable, too, with aroomy, easy-to-enter cab, precise steering and greatvisibility. And it features the latest in safety technology,the Bobcat Interlock Control System* (BICSTM), asstandard equipment.

*BICSTM requires the operator to be seated in theloader with the Seat Bar in place and the engine running.After the operator presses the “press to operate loader”button, the hydraulic lift, tilt functions and traction-drivesystem can be operated.

Rear Auxiliary HydraulicsSegmented TiresService Safety Training KitSolid TiresSkid-Steer Loader

Operator Training KitSpecial Applications Kit3

Suspension Seat (vinyl or cloth cover)Top & Rear WindowsUltra Grip Flotation Tires

MELROE COMPANY • P.O. Box 6019 • Fargo, ND 58108-6019Printed in U.S.A. Kn-75M-1099-#640092-F

®

B-1677

State-of-the-art instrument panels provide dozens of operational features, diagnostics and monitoring. Optional deluxe instrumentationpackage includes keyless start security system, lockouts, real-time and job clocks, multi-language display, even a “help” menu.

The optional, fully-adjustable suspensionseat allows comfortable all-day operation.The innovative seat bar pivots from the rear,providing secondary restraint protection andserving as a comfortable armrest for operatorsof all sizes.

Introducing the new standardof design, productivity and comfort!

The Bobcat 873 G-Series loader delivers a wide range of innovativeoperator-friendly features and exciting new value-added options.

The NEW 873 G-Series

Skid-Steer Loader

High-visibility front door, with 49% more glass.

79.0 in.(2007 mm)

8.5 in.(216 mm)

48.8 in.(1240 mm)

28o

112.1 in.(2848 mm) 140.7 in.

(3574 mm)

32o

37o

98.4 in.(2499 mm)

124.3 in.(3158 mm)

39.1 in.(993 mm)

101o 159.1 in.(4042 mm) 84.2 in.

(2139 mm)

C

B

A

Left Side Instrument Panel Right Side Standard Instrument Panel Optional Deluxe Instrumentation Package

The New StandardCombine all these outstanding features with the 873 G-Series’ ease of operation,versatility, maneuverability, wide choice of attachments, worldwide dealersupport, service backup, parts availability and high resale, and it all adds up to

The Bobcat AdvantageTotal value that can’t be matched.

®

LIFT MORE.WORK FASTER.RIDE SMOOTHER.Everything’s easier with theBobcat® 873 Skid-Steer loader!The 873 is one tough machine. It’s the ideal choice for those bigjobs because it’s not only strong, it’s smooth, too. Sure, it has a husky73-hp turbo-charged engine. Sure, it has a rated operating capacity of2,400 lb. But it also has an extended wheelbase of 48.8 inches tosmooth out the bumps and lumps and keepyou going in comfort all day long.

Belt Drive Advantage.The Bobcat belt drive advantage means Bobcatloader engines can be run slower, resulting in aquieter machine that lasts longer and uses less fuel.This system also maximizes pump efficiency andminimizes steeringlever effort.

ExclusiveBob-TachSystem.For fast, secure attachmentchanges. Bob-Tach frame(A) moves into attachmentflange (B) handle(C) pushes down easily,pressing wedge (D) throughframe and attachment holefor solid connection.

Adjustment Not Needed.The Bobcat “bow-tie” drive chain designuses pre-stressed, heavy-duty drive chains in twoshort continuous loops on each side. That means noperiodic, time-consuming adjustments, plus long life

even inthe mostruggedconditions.

Clean Cooling.The exclusive Bobcat dual path cooling systembrings clean, cool air from above, through theengine and hydraulic oil coolers, mixes it withengine compartment air,then exhausts it outtwo side vents.

Greater Comfort.• The G-Series cab is operator-friendly, designed for maximum comfort and functionality.• With its larger cab opening the 873 is easy to enter and exit.• The innovative seat bar pivots from the rear, providing secondary restraint protection

and serving as a comfortable armrest for operators of all sizes.• High-output halogen headlamps double the amount of illumination to the work area

for better operation in low light.• The 873 G-Series also features a new, easy-to-read, highly functional instrument panel,

along with a number of value-added options.

More Options.• Factory or field installed Deluxe Instrumentation includes keyless start, shutdown function,

monitoring and diagnostic functions.• High-flow auxiliary hydraulics for operating attachments such as planers and chippers.• Fully-adjustable suspension seat for all-day operator comfort.

Added Value.Couple all the new features of the 873 G-Series with proven power and smooth rideand you have a skid-steer loader that delivers optimum performance on every jobsite.Get in the seat of a new 873 G-Series today for a great view and an even greater value!

New! G-Series engineering sets the standard for comfort, visibility and performance!

Ask about the 3-yearbelt warranty!

Extra Hydraulic Power!The high-flow option package gives your 873 loader an extra10.3 GPM of hydraulic flow, for a total of 29 gpm. This, alongwith 3000 psi system pressure, allows you to operate specialhigh-performance attachments, including a chipper, pavementplaner, stump grinder and trencher.

Built-In Safety.The 873 gives you the latest in safety technology — theBobcat Interlock Control System (BICSTM). This exclusivefeature requires that the operator be seated in the loaderwith the seat bar down in place and the engine running.After the operator presses the “press to operate loader”button, the hydraulic lift, tilt functions and traction-drivesystem can be operated.

Serviceability.Bobcat skid-steer loaders feature easy servicing and quickaccess to components should a repair be needed. Servicetechnicians can get to hydraulic/hydrostatic componentsquickly by unbolting two nuts and lifting the cab back.The tailgate swings out — allowing for quick, easy accessto engine components.

BearingGrease?Forget It!Self-lubricating axlebearings never needgreasing. The uniquehub design offersgreat seal protection.

Worldwide Support.

With the Bobcat 873 G-Series

you get more than just an

exceptional skid-steer loader.

You also get the support

of a worldwide network of

Bobcat dealers offering

industry-leading attachments,

accessories and parts

availability. Their factory-

trained service technicians

are equipped to handle

all your parts and service

requirements, including

engine and hydrostatic/

hydraulic components.

There’s an excellent

warranty program, too.

Get all the details from

your Bobcat dealer.

More muscle for big jobs.

Loading. Lifting. Carrying.

Excavating. Operating

attachments. The Bobcat

873 G-Series has plenty of

power for every assignment.

All that maneuverable muscle

comes from a tough 73-hp

turbo-charged diesel engine

that lets you lift up to 2,400

lb., carry it faster and

load it easier.

And with its

extended

wheelbase, the

873 gives you a

smoother ride

as well as

added strength.

Choice of Attachments.As with any Bobcat loader, you can count on avariety of quick-mounting attachments for your 873.The operator can easily replace a bucket with an8709 backhoe, 6B landscape rake, 72-inchsweeper, 68-inch tiller, pallet forks, a grapple andmany more.

Training Resources.Training kits, available through your Bobcatdealer’s parts department,let you train current andnew operators and servicetechnicians on the latestsafety operation andservicing functionson Bobcat skid-steerloaders. A Spanishlanguage versionis also available.Check the Bobcat website formore information: www.bobcat.com/markets

Bobcat Attachments Angle BroomAugerBackhoeBrushcatTM Rotary CutterBuckets (4 different styles)ChipperCombination BucketConcrete MixerDiggerDozer BladeDumping HopperEjector BucketFront Scarifier

GraderGrapples and ForksHydraulic Breaker4

Hydraulic Pallet ForkIndustrial GrappleLandplaneLandscape RakePallet ForksPlanerPower RakeSnow BladeSnow BlowerSod Layer

Stump GrinderSuper ScraperSweeperThree Point HitchTillerTilt-TatchTracksTree SpadeTrench CompactorTrencherVibratory RollerWheel Saw (High Flow only)

Bobcat® 873 G-Series Skid-Steer Loader

Rated Operating Capacity1 2400 lb. (1089 kg)Tipping Load 4800 lb. (2177 kg)Hydraulic Pump Capacity 18.7 GPM (70,8 L/min.) High Flow Options 29.0 GPM (109,8 L/min.)Travel Speed 7.9 MPH (12,7 km/hr.)

Length (with bucket) 140.7 in. (3574 mm)Width (with bucket) 74.0 in. (1880 mm)Height 79.0 in. (2007 mm)Height to Bucket Pin 124.3 in. (3158 mm)

Make/Model Deutz/BF4M1011F Turbo-chargedFuel/Cooling Diesel/OilCylinders 4SAE NET HP/Displacement 73.0/178 in.3 (2,92 L)Fuel Tank Capacity 25 gal. (94,6 L)

Operating Weight 7285 lb. (3304 kg)

Steering and Drive Forward, Reverse, Travel Speed and Steering Controlled By Two Hand Levers.Hydraulics Two Foot Pedals (Or Optional Advanced Hand Controls) Raise/Lower Lift Arms

and Dump/Rollback Bucket.Transmission Hydrostatic, Four-Wheel Drive.

Performance 873

Dimensions

Engine

Machine Weight

Operation

Adjustable Cushion SeatAutomatically Activated

Glow PlugsBobcat Interlock Control

System (BICSTM)Bob-Tach

Standard Features

Options/Accessories Advanced Hand ControlsAttachment Control KitBackup AlarmCatalytic PurifierCounterweightDeluxe CabDeluxe Cab w/HeaterDeluxe InstrumentationEngine Shutdown

SPECIFICATIONS

1Operating capacity rated with standard digging bucket according to SAE standardJ818 - OPERATING CAPACITY TO EQUAL NO MORE THAN ONE - HALF THE TIPPING LOAD.

2Bucket positioning helps operator keep the same tilt of the load during lifting.3Includes lexan front door, top and rear windows.4Special application kit (see #3) must be used.NOTE — Where applicable, Dimensions are in accordance with Society of AutomotiveEngineers (SAE) standards. • Specifications and design are subject to change withoutnotice. • Pictures of Bobcat skid-steer loaders may show other than standard equipment.• All dimensions are shown in inches. • Respective metric dimensions are enclosed byparentheses. Melroe Company complies with the requirements of ISO 9001 as registeredwith BSI.

Parking BrakeSeat Bar (available for all Bobcat skid-steer loaders)Seat Belt12-16.5 Bobcat Heavy Duty TiresTurbo-Charger (Approved Spark Arrestor)

Dual Path Cooling SystemLift Arm SupportMeters/Gauges/

Warning LightsOperator Cab

Flasher/Strobe/Rotating Beacon LightsFront Auxiliary HydraulicsFront & Rear LightsHigh Flow Auxiliary

Hydraulics PackageHornHydraulic Bucket

Positioning2

Keyless Start System

A - 12 -16.5 Tires - 72.0 in. (1829 mm)31 -15.5 x 15 Tires - 78.2 in. (1986 mm)

B - 12 -16.5 Tires - 59.2 in. (1503 mm)31 - 15.5 x 15 Tires - 62.7 in. (1593 mm)

C - 74 in. Bucket Width - 74.0 in. (1880 mm)80 in. Bucket Width - 80.0 in. (2032 mm)

2400 LB.Rated Operating Capacity

124.3 IN.Lift Height

73 HPTurbo-Charged, Oil-Cooled Diesel Engine

LIFT MORE.WORK FASTER. RIDE SMOOTHER.

The Bobcat 873 G-Series is a natural for working inconstruction, landscape, nursery, masonary, concrete,ag and many other applications.

With 2,400 lb. of lift, the 873 can easily handle big loadslike pallets of sod, brick or cement blocks. And with itsvertical lift path design, a reach of almost 40 inches anda lift height of almost 10.5 feet, the 873 makes loadingtrucks fast and effortless.

The heart of all this 4-wheel drive power is the 73-hpturbo-charged, oil-cooled Deutz diesel engine. A 18.7gpm pump at 3,000 psi generates plenty of hydraulicpower for operating attachments like augers, landscaperakes, tillers, breakers and more.

The frosting on the cake is the 873’s extended, 48.8-inchwheelbase, which produces a smooth, operator-friendlyride with a brisk travel speed of 7.9 mph. All this in acompact loader that’s only 79 inches high, 74 incheswide, 140.7 inches long with bucket, and weighs just7,285 lb.

But there’s more. The 873 is comfortable, too, with aroomy, easy-to-enter cab, precise steering and greatvisibility. And it features the latest in safety technology,the Bobcat Interlock Control System* (BICSTM), asstandard equipment.

*BICSTM requires the operator to be seated in theloader with the Seat Bar in place and the engine running.After the operator presses the “press to operate loader”button, the hydraulic lift, tilt functions and traction-drivesystem can be operated.

Rear Auxiliary HydraulicsSegmented TiresService Safety Training KitSolid TiresSkid-Steer Loader

Operator Training KitSpecial Applications Kit3

Suspension Seat (vinyl or cloth cover)Top & Rear WindowsUltra Grip Flotation Tires

MELROE COMPANY • P.O. Box 6019 • Fargo, ND 58108-6019Printed in U.S.A. Kn-75M-1099-#640092-F

®

B-1677

State-of-the-art instrument panels provide dozens of operational features, diagnostics and monitoring. Optional deluxe instrumentationpackage includes keyless start security system, lockouts, real-time and job clocks, multi-language display, even a “help” menu.

The optional, fully-adjustable suspensionseat allows comfortable all-day operation.The innovative seat bar pivots from the rear,providing secondary restraint protection andserving as a comfortable armrest for operatorsof all sizes.

Introducing the new standardof design, productivity and comfort!

The Bobcat 873 G-Series loader delivers a wide range of innovativeoperator-friendly features and exciting new value-added options.

The NEW 873 G-Series

Skid-Steer Loader

High-visibility front door, with 49% more glass.

79.0 in.(2007 mm)

8.5 in.(216 mm)

48.8 in.(1240 mm)

28o

112.1 in.(2848 mm) 140.7 in.

(3574 mm)

32o

37o

98.4 in.(2499 mm)

124.3 in.(3158 mm)

39.1 in.(993 mm)

101o 159.1 in.(4042 mm) 84.2 in.

(2139 mm)

C

B

A

Left Side Instrument Panel Right Side Standard Instrument Panel Optional Deluxe Instrumentation Package

The New StandardCombine all these outstanding features with the 873 G-Series’ ease of operation,versatility, maneuverability, wide choice of attachments, worldwide dealersupport, service backup, parts availability and high resale, and it all adds up to

The Bobcat AdvantageTotal value that can’t be matched.

®

LIFT MORE.WORK FASTER.RIDE SMOOTHER.Everything’s easier with theBobcat® 873 Skid-Steer loader!The 873 is one tough machine. It’s the ideal choice for those bigjobs because it’s not only strong, it’s smooth, too. Sure, it has a husky73-hp turbo-charged engine. Sure, it has a rated operating capacity of2,400 lb. But it also has an extended wheelbase of 48.8 inches tosmooth out the bumps and lumps and keepyou going in comfort all day long.

Belt Drive Advantage.The Bobcat belt drive advantage means Bobcatloader engines can be run slower, resulting in aquieter machine that lasts longer and uses less fuel.This system also maximizes pump efficiency andminimizes steeringlever effort.

ExclusiveBob-TachSystem.For fast, secure attachmentchanges. Bob-Tach frame(A) moves into attachmentflange (B) handle(C) pushes down easily,pressing wedge (D) throughframe and attachment holefor solid connection.

Adjustment Not Needed.The Bobcat “bow-tie” drive chain designuses pre-stressed, heavy-duty drive chains in twoshort continuous loops on each side. That means noperiodic, time-consuming adjustments, plus long life

even inthe mostruggedconditions.

Clean Cooling.The exclusive Bobcat dual path cooling systembrings clean, cool air from above, through theengine and hydraulic oil coolers, mixes it withengine compartment air,then exhausts it outtwo side vents.

Greater Comfort.• The G-Series cab is operator-friendly, designed for maximum comfort and functionality.• With its larger cab opening the 873 is easy to enter and exit.• The innovative seat bar pivots from the rear, providing secondary restraint protection

and serving as a comfortable armrest for operators of all sizes.• High-output halogen headlamps double the amount of illumination to the work area

for better operation in low light.• The 873 G-Series also features a new, easy-to-read, highly functional instrument panel,

along with a number of value-added options.

More Options.• Factory or field installed Deluxe Instrumentation includes keyless start, shutdown function,

monitoring and diagnostic functions.• High-flow auxiliary hydraulics for operating attachments such as planers and chippers.• Fully-adjustable suspension seat for all-day operator comfort.

Added Value.Couple all the new features of the 873 G-Series with proven power and smooth rideand you have a skid-steer loader that delivers optimum performance on every jobsite.Get in the seat of a new 873 G-Series today for a great view and an even greater value!

New! G-Series engineering sets the standard for comfort, visibility and performance!

Ask about the 3-yearbelt warranty!

Extra Hydraulic Power!The high-flow option package gives your 873 loader an extra10.3 GPM of hydraulic flow, for a total of 29 gpm. This, alongwith 3000 psi system pressure, allows you to operate specialhigh-performance attachments, including a chipper, pavementplaner, stump grinder and trencher.

Built-In Safety.The 873 gives you the latest in safety technology — theBobcat Interlock Control System (BICSTM). This exclusivefeature requires that the operator be seated in the loaderwith the seat bar down in place and the engine running.After the operator presses the “press to operate loader”button, the hydraulic lift, tilt functions and traction-drivesystem can be operated.

Serviceability.Bobcat skid-steer loaders feature easy servicing and quickaccess to components should a repair be needed. Servicetechnicians can get to hydraulic/hydrostatic componentsquickly by unbolting two nuts and lifting the cab back.The tailgate swings out — allowing for quick, easy accessto engine components.

BearingGrease?Forget It!Self-lubricating axlebearings never needgreasing. The uniquehub design offersgreat seal protection.

Worldwide Support.

With the Bobcat 873 G-Series

you get more than just an

exceptional skid-steer loader.

You also get the support

of a worldwide network of

Bobcat dealers offering

industry-leading attachments,

accessories and parts

availability. Their factory-

trained service technicians

are equipped to handle

all your parts and service

requirements, including

engine and hydrostatic/

hydraulic components.

There’s an excellent

warranty program, too.

Get all the details from

your Bobcat dealer.

More muscle for big jobs.

Loading. Lifting. Carrying.

Excavating. Operating

attachments. The Bobcat

873 G-Series has plenty of

power for every assignment.

All that maneuverable muscle

comes from a tough 73-hp

turbo-charged diesel engine

that lets you lift up to 2,400

lb., carry it faster and

load it easier.

And with its

extended

wheelbase, the

873 gives you a

smoother ride

as well as

added strength.

Choice of Attachments.As with any Bobcat loader, you can count on avariety of quick-mounting attachments for your 873.The operator can easily replace a bucket with an8709 backhoe, 6B landscape rake, 72-inchsweeper, 68-inch tiller, pallet forks, a grapple andmany more.

Training Resources.Training kits, available through your Bobcatdealer’s parts department,let you train current andnew operators and servicetechnicians on the latestsafety operation andservicing functionson Bobcat skid-steerloaders. A Spanishlanguage versionis also available.Check the Bobcat website formore information: www.bobcat.com/markets

LIFT MORE.WORK FASTER.RIDE SMOOTHER.Everything’s easier with theBobcat® 873 Skid-Steer loader!The 873 is one tough machine. It’s the ideal choice for those bigjobs because it’s not only strong, it’s smooth, too. Sure, it has a husky73-hp turbo-charged engine. Sure, it has a rated operating capacity of2,400 lb. But it also has an extended wheelbase of 48.8 inches tosmooth out the bumps and lumps and keepyou going in comfort all day long.

Belt Drive Advantage.The Bobcat belt drive advantage means Bobcatloader engines can be run slower, resulting in aquieter machine that lasts longer and uses less fuel.This system also maximizes pump efficiency andminimizes steeringlever effort.

ExclusiveBob-TachSystem.For fast, secure attachmentchanges. Bob-Tach frame(A) moves into attachmentflange (B) handle(C) pushes down easily,pressing wedge (D) throughframe and attachment holefor solid connection.

Adjustment Not Needed.The Bobcat “bow-tie” drive chain designuses pre-stressed, heavy-duty drive chains in twoshort continuous loops on each side. That means noperiodic, time-consuming adjustments, plus long life

even inthe mostruggedconditions.

Clean Cooling.The exclusive Bobcat dual path cooling systembrings clean, cool air from above, through theengine and hydraulic oil coolers, mixes it withengine compartment air,then exhausts it outtwo side vents.

Greater Comfort.• The G-Series cab is operator-friendly, designed for maximum comfort and functionality.• With its larger cab opening the 873 is easy to enter and exit.• The innovative seat bar pivots from the rear, providing secondary restraint protection

and serving as a comfortable armrest for operators of all sizes.• High-output halogen headlamps double the amount of illumination to the work area

for better operation in low light.• The 873 G-Series also features a new, easy-to-read, highly functional instrument panel,

along with a number of value-added options.

More Options.• Factory or field installed Deluxe Instrumentation includes keyless start, shutdown function,

monitoring and diagnostic functions.• High-flow auxiliary hydraulics for operating attachments such as planers and chippers.• Fully-adjustable suspension seat for all-day operator comfort.

Added Value.Couple all the new features of the 873 G-Series with proven power and smooth rideand you have a skid-steer loader that delivers optimum performance on every jobsite.Get in the seat of a new 873 G-Series today for a great view and an even greater value!

New! G-Series engineering sets the standard for comfort, visibility and performance!

Ask about the 3-yearbelt warranty!

Extra Hydraulic Power!The high-flow option package gives your 873 loader an extra10.3 GPM of hydraulic flow, for a total of 29 gpm. This, alongwith 3000 psi system pressure, allows you to operate specialhigh-performance attachments, including a chipper, pavementplaner, stump grinder and trencher.

Built-In Safety.The 873 gives you the latest in safety technology — theBobcat Interlock Control System (BICSTM). This exclusivefeature requires that the operator be seated in the loaderwith the seat bar down in place and the engine running.After the operator presses the “press to operate loader”button, the hydraulic lift, tilt functions and traction-drivesystem can be operated.

Serviceability.Bobcat skid-steer loaders feature easy servicing and quickaccess to components should a repair be needed. Servicetechnicians can get to hydraulic/hydrostatic componentsquickly by unbolting two nuts and lifting the cab back.The tailgate swings out — allowing for quick, easy accessto engine components.

BearingGrease?Forget It!Self-lubricating axlebearings never needgreasing. The uniquehub design offersgreat seal protection.

Worldwide Support.

With the Bobcat 873 G-Series

you get more than just an

exceptional skid-steer loader.

You also get the support

of a worldwide network of

Bobcat dealers offering

industry-leading attachments,

accessories and parts

availability. Their factory-

trained service technicians

are equipped to handle

all your parts and service

requirements, including

engine and hydrostatic/

hydraulic components.

There’s an excellent

warranty program, too.

Get all the details from

your Bobcat dealer.

More muscle for big jobs.

Loading. Lifting. Carrying.

Excavating. Operating

attachments. The Bobcat

873 G-Series has plenty of

power for every assignment.

All that maneuverable muscle

comes from a tough 73-hp

turbo-charged diesel engine

that lets you lift up to 2,400

lb., carry it faster and

load it easier.

And with its

extended

wheelbase, the

873 gives you a

smoother ride

as well as

added strength.

Choice of Attachments.As with any Bobcat loader, you can count on avariety of quick-mounting attachments for your 873.The operator can easily replace a bucket with an8709 backhoe, 6B landscape rake, 72-inchsweeper, 68-inch tiller, pallet forks, a grapple andmany more.

Training Resources.Training kits, available through your Bobcatdealer’s parts department,let you train current andnew operators and servicetechnicians on the latestsafety operation andservicing functionson Bobcat skid-steerloaders. A Spanishlanguage versionis also available.Check the Bobcat website formore information: www.bobcat.com/markets

Bobcat Attachments Angle BroomAugerBackhoeBrushcatTM Rotary CutterBuckets (4 different styles)ChipperCombination BucketConcrete MixerDiggerDozer BladeDumping HopperEjector BucketFront Scarifier

GraderGrapples and ForksHydraulic Breaker4

Hydraulic Pallet ForkIndustrial GrappleLandplaneLandscape RakePallet ForksPlanerPower RakeSnow BladeSnow BlowerSod Layer

Stump GrinderSuper ScraperSweeperThree Point HitchTillerTilt-TatchTracksTree SpadeTrench CompactorTrencherVibratory RollerWheel Saw (High Flow only)

Bobcat® 873 G-Series Skid-Steer Loader

Rated Operating Capacity1 2400 lb. (1089 kg)Tipping Load 4800 lb. (2177 kg)Hydraulic Pump Capacity 18.7 GPM (70,8 L/min.) High Flow Options 29.0 GPM (109,8 L/min.)Travel Speed 7.9 MPH (12,7 km/hr.)

Length (with bucket) 140.7 in. (3574 mm)Width (with bucket) 74.0 in. (1880 mm)Height 79.0 in. (2007 mm)Height to Bucket Pin 124.3 in. (3158 mm)

Make/Model Deutz/BF4M1011F Turbo-chargedFuel/Cooling Diesel/OilCylinders 4SAE NET HP/Displacement 73.0/178 in.3 (2,92 L)Fuel Tank Capacity 25 gal. (94,6 L)

Operating Weight 7285 lb. (3304 kg)

Steering and Drive Forward, Reverse, Travel Speed and Steering Controlled By Two Hand Levers.Hydraulics Two Foot Pedals (Or Optional Advanced Hand Controls) Raise/Lower Lift Arms

and Dump/Rollback Bucket.Transmission Hydrostatic, Four-Wheel Drive.

Performance 873

Dimensions

Engine

Machine Weight

Operation

Adjustable Cushion SeatAutomatically Activated

Glow PlugsBobcat Interlock Control

System (BICSTM)Bob-Tach

Standard Features

Options/Accessories Advanced Hand ControlsAttachment Control KitBackup AlarmCatalytic PurifierCounterweightDeluxe CabDeluxe Cab w/HeaterDeluxe InstrumentationEngine Shutdown

SPECIFICATIONS

1Operating capacity rated with standard digging bucket according to SAE standardJ818 - OPERATING CAPACITY TO EQUAL NO MORE THAN ONE - HALF THE TIPPING LOAD.

2Bucket positioning helps operator keep the same tilt of the load during lifting.3Includes lexan front door, top and rear windows.4Special application kit (see #3) must be used.NOTE — Where applicable, Dimensions are in accordance with Society of AutomotiveEngineers (SAE) standards. • Specifications and design are subject to change withoutnotice. • Pictures of Bobcat skid-steer loaders may show other than standard equipment.• All dimensions are shown in inches. • Respective metric dimensions are enclosed byparentheses. Melroe Company complies with the requirements of ISO 9001 as registeredwith BSI.

Parking BrakeSeat Bar (available for all Bobcat skid-steer loaders)Seat Belt12-16.5 Bobcat Heavy Duty TiresTurbo-Charger (Approved Spark Arrestor)

Dual Path Cooling SystemLift Arm SupportMeters/Gauges/

Warning LightsOperator Cab

Flasher/Strobe/Rotating Beacon LightsFront Auxiliary HydraulicsFront & Rear LightsHigh Flow Auxiliary

Hydraulics PackageHornHydraulic Bucket

Positioning2

Keyless Start System

A - 12 -16.5 Tires - 72.0 in. (1829 mm)31 -15.5 x 15 Tires - 78.2 in. (1986 mm)

B - 12 -16.5 Tires - 59.2 in. (1503 mm)31 - 15.5 x 15 Tires - 62.7 in. (1593 mm)

C - 74 in. Bucket Width - 74.0 in. (1880 mm)80 in. Bucket Width - 80.0 in. (2032 mm)

2400 LB.Rated Operating Capacity

124.3 IN.Lift Height

73 HPTurbo-Charged, Oil-Cooled Diesel Engine

LIFT MORE.WORK FASTER. RIDE SMOOTHER.

The Bobcat 873 G-Series is a natural for working inconstruction, landscape, nursery, masonary, concrete,ag and many other applications.

With 2,400 lb. of lift, the 873 can easily handle big loadslike pallets of sod, brick or cement blocks. And with itsvertical lift path design, a reach of almost 40 inches anda lift height of almost 10.5 feet, the 873 makes loadingtrucks fast and effortless.

The heart of all this 4-wheel drive power is the 73-hpturbo-charged, oil-cooled Deutz diesel engine. A 18.7gpm pump at 3,000 psi generates plenty of hydraulicpower for operating attachments like augers, landscaperakes, tillers, breakers and more.

The frosting on the cake is the 873’s extended, 48.8-inchwheelbase, which produces a smooth, operator-friendlyride with a brisk travel speed of 7.9 mph. All this in acompact loader that’s only 79 inches high, 74 incheswide, 140.7 inches long with bucket, and weighs just7,285 lb.

But there’s more. The 873 is comfortable, too, with aroomy, easy-to-enter cab, precise steering and greatvisibility. And it features the latest in safety technology,the Bobcat Interlock Control System* (BICSTM), asstandard equipment.

*BICSTM requires the operator to be seated in theloader with the Seat Bar in place and the engine running.After the operator presses the “press to operate loader”button, the hydraulic lift, tilt functions and traction-drivesystem can be operated.

Rear Auxiliary HydraulicsSegmented TiresService Safety Training KitSolid TiresSkid-Steer Loader

Operator Training KitSpecial Applications Kit3

Suspension Seat (vinyl or cloth cover)Top & Rear WindowsUltra Grip Flotation Tires

MELROE COMPANY • P.O. Box 6019 • Fargo, ND 58108-6019Printed in U.S.A. Kn-75M-1099-#640092-F

®

B-1677

State-of-the-art instrument panels provide dozens of operational features, diagnostics and monitoring. Optional deluxe instrumentationpackage includes keyless start security system, lockouts, real-time and job clocks, multi-language display, even a “help” menu.

The optional, fully-adjustable suspensionseat allows comfortable all-day operation.The innovative seat bar pivots from the rear,providing secondary restraint protection andserving as a comfortable armrest for operatorsof all sizes.

Introducing the new standardof design, productivity and comfort!

The Bobcat 873 G-Series loader delivers a wide range of innovativeoperator-friendly features and exciting new value-added options.

The NEW 873 G-Series

Skid-Steer Loader

High-visibility front door, with 49% more glass.

79.0 in.(2007 mm)

8.5 in.(216 mm)

48.8 in.(1240 mm)

28o

112.1 in.(2848 mm) 140.7 in.

(3574 mm)

32o

37o

98.4 in.(2499 mm)

124.3 in.(3158 mm)

39.1 in.(993 mm)

101o 159.1 in.(4042 mm) 84.2 in.

(2139 mm)

C

B

A

Left Side Instrument Panel Right Side Standard Instrument Panel Optional Deluxe Instrumentation Package

The New StandardCombine all these outstanding features with the 873 G-Series’ ease of operation,versatility, maneuverability, wide choice of attachments, worldwide dealersupport, service backup, parts availability and high resale, and it all adds up to

The Bobcat AdvantageTotal value that can’t be matched.

®