wolf classic cabinets - kitchen cabinets - fast classic cabinets are proudly made in the usa,...

Download WOLF CLASSIC CABINETS - Kitchen Cabinets - FAST Classic Cabinets are proudly made in the USA, factory-assembled from hand selected American Maple without ... Heritage Brown w/ Chocolate

Post on 16-May-2018

216 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • WOLF CLASSIC CABINETS

    FINISH PROCESS

    Page 1 1-800-756-8077 www.cabinetexpress.com

    Exceptional Style, Exceptional Value

    WOLF Classic Cabinets proudly offers eleven of todays most popular door style/finish combinations at extremely attractive

    price points, including no up charges for the upscale look of paints and glazes. With a broad selection of SKUs,

    accessories and moldings, WOLF Classic Cabinets will make your design as beautiful as it is affordable.

    Quality is in the Details

    WOLF Classic Cabinets are proudly made in the USA, factory-assembled from hand selected American Maple without

    cams, brackets or clips. All drawer boxes are dovetailed for strength at no additional charge. In addition, our finishes are

    machine-applied using the latest technology to ensure a smooth, even look. Corrugated packaging is securely strapped,

    fully encasing your product and assuring safe arrival without damage.

    Speed and Reliability

    Because WOLF Classic Cabinets are manufactured domestically, theres no need to worry about disrupted supply,

    delayed containers or other issues common among similarly priced products. You wont need to carry a large inventory

    or buy extra product as a failsafe. With every SKU in stock at our Pennsylvania or Georgia Distribution Center, your order

    is available to ship quickly.

    Certified Stewards of the Environment

    In addition to being certified with the Kitchen Cabinet Manufacturers Association (KCMA), WOLF products also meet

    the standards of the KCMAs Environmental Stewardship Program (ESP). Participants in the program are held to strict

    requirements in support of responsible forest management that promotes sustainability and long-term economic and

    environmental benefit. This responsibility includes recycling our saw dust, using low VOC finishes and CARB

    approved plywood.

    Whether youre looking for style, quality, affordability or all three look no further than WOLF Classic Cabinets.

    1. All surfaces are machine sanded

    2. Dust particles are removed before entering each spray machine

    3. Product enters an automated finish system where solvent-based pigment stain is applied

    4. Product is sealed and put through a pre-cure drying process

    5. Complete cure is done with slow bake process

    6. All edges of parts are hand sanded before put in a brush sanding machine

    7. Final topcoat is applied and put through a pre-cure process followed by slow bake for final, thorough curing

    8. Clear finishes use a catalyzed varnish & Paint finishes use a pre-catalyzed varnish

    9. Products are inspected for defects, cleanliness and smoothness

    10. The front side of the products gets a stain coat, a sealer coat and final top coat. The backs of drawer front and doors get a stain coat and a sealer coat.

  • Naturally occurring wood characteristics such as variations in color, grain, mineral streaks and knots are not considered defects. Color variations are a natural occurrence due to species, age, character of cabinets, and exposure to UV light and sunlight. Such variations and changes are not considered defects. For these reasons, new and/or replacement cabinets may not match display samples and/or existing cabinets. Warping is the bending or twisting of a part. To measure a door or shelf, lay the product on a flat surface and measure the gap from the surface to the part. The standard allowable tolerance for wood is 1/8 per lineal foot. Materials that fall within specification are considered acceptable, as a part of the natural characteristics of wood.

    WOOD CHARACTERISTICS & VARIATIONS

    CABINET SPECIFICATIONS

    Half-depth adjustable shelf of 3/4 plywood with bull nosed, foil covered front edges. The shelves are held in place with self-locking clips on the sides.

    Side panels 1/2 plywood with matching exterior laminate glued and stapled in a 1/2 dado in the cabinets front frame.

    Back panels made from vinyl covered (inside only) 1/2 plywood are glued and nailed in a 1/2 dado and stapled to the hang rail and cabinet bottom.

    All wood 3/4 corner blocks are installed on all corners.

    Cabinet fronts are made from 3/4 solid maple wood. Front stiles are pocket drilled and assembled with 1-1/4 screws for rugged durability. Bottoms are 1/2 solid maple wood.

    BASE CABINETS

    Cabinet fronts are made from 3/4 solid wood. Front stiles are pocket drilled and assembled with 1-1/4 screws for rugged durability. Tops are 1/2 solid maple wood.

    Side panels 1/2 plywood with matching exterior laminate glued and stapled in a 1/2 dado in the cabinets front frame.

    Back panels made from vinyl covered (inside only) 1/2 plywood are glued and nailed in a 1/2 dado and stapled to the cabinet tops and bottom. Plywood hanging rails are installed at both the top and bottom of the cabinet.

    Adjustable 3/4 plywood shelf with bull nosed, foil covered front edges. The shelves are held in place with a self-locking clips on the sides.

    WALL CABINETS

    FINISH, DRAWERS & HINGES

    All drawers are constructed using 5/8 clear finished solid wood with dovetail construction. Drawer bottom is 1/4 plywood in a dado into drawer sides. All drawers (including Pull Outs) are rated for 75lbs. Saginaw: Side mount, standard epoxy glides

    Dartmouth & Hudson: Full extension, under mount glides with soft-close

    Saginaw: Hidden, six-way adjustable hinge

    Dartmouth & Hudson: Hidden, six-way adjustable hinge with installed snap on soft-closing mechanism.

    All cabinets that require handing are handed left (hinge is on the left when looking at the cabinet). Wall cabinets can simply be flipped over to change hinging. For base cabinets, remove and flip door then screw to other side.

    Adjustable 3/4 plywood shelf with bull nosed, foil covered front edges. The shelves are held in place with a self-locking clips on the sides.

    All cabinet front and door surfaces receive stain or paint and a catalyzed clear finish. Our finish provides a deep, rich wood tone that is resistant to household chemicals, water, food stains and mild acids.

    Page 2 1-800-756-8077 www.cabinetexpress.com

  • INVENTORIED DOOR STYLES

    Page 3 1-800-756-8077 www.cabinetexpress.com

    SAGINAW Veneer Raised Center Panel Partial Overlay All Maple Face Frames & Doors Wood Dovetailed Drawer Side-mount Epoxy Glides

    Available Colors: Chestnut (GA) Crimson (PA) Honey (PA)

    DARTMOUTH Veneer Recessed Panel Shaker Full Overlay All Maple Face Frames & Doors Wood Dovetailed Drawer Soft-close Door/Drawer Full Extension, Undermount Glides Plywood Center Panel

    Available Colors: Crimson (GA) Dark Sable (GA) Honey (PA) Painted White (PA)

    HUDSON Raised Center Panel Pillow Miter Full Overlay All Maple Face Frames & Doors Wood Dovetailed Drawer Soft-close Door/Drawer Full Extension, Undermount Glides Solid Wood Center Panel

    Available Colors: Painted Antique White (PA) Crimson w/ Chocolate Glaze (GA) Heritage Brown w/ Chocolate Glaze (PA)

    GA: Stocked in our Georgia Facility / PA: Stocked in our Pennsylvania Facility. Additional colors available by full truckload. See your WOLF Sales Consultant for details.

    CIRCA Slab Full Overlay All Maple Face Frames 5/8 Particleboard Door with Maple

    Veneer & Maple Veneer banded edges Wood Dovetailed Drawer Soft-close Door/Drawer Full Extension, Undermount Glides Door Grain Direction: Vertical Drawer Grain Direction: Horizontal

    Available Colors: Dark Sable (PA)

    NOMENCLATURE

    B = Base BC = Base Corner BEC = Base End Cabinet BER = Base Easy Reach BPOF = Base Pull out Fluted Filler (Spice pull out) BPOP = Base Pull out Plain Filler (Spice pull out) BWB = Base Waste Basket CCROWN = Cove Crown DB = Drawer Base DD = Double Door DEP = Decorative End Panel DWEP = Decorative Wall End Panel DWP = Dishwasher End Panel F = Filler FB = Furniture Base FF = Fluted Filler FWF = Fluted Wall Filler LGCROWN = Large Crown LS = Lazy Susan MBAT = Batten MDENTIL = Dentil Moulding

    MICW = Inside Corner MLR = Light Rail MOCW = Outside Corner MQR = Quarter Round MROPE = Rope Moulding MSW = Scribe MWC = Microwave Cabinet OC = Oven Cabinet ORG = Organizer P = Panel POS = Pull Out Shelf PR = Plate Rack REF = Refrigerator Panel REVCROWN = Reversible Crown ROS = Rosette RW = Refrigerator Wall SB = Sink Base SCB = Sink Corner Base SCB**FF = Sink Corner Base w/ Front & Floor SLGCROWN = Large Crown for Full Overlay SMCROWN = Small Crown SSMCROWN = Small Crown for Full Overlay U = Utility

    V = Valance VB = Vanity Base VBL = Vanity Base Left Combo Unit VBR = Vanity Base Right Combo Unit VDB = Vanity Drawer Base VDT = Vanity Drawer Tray VSB = Vanity Sink Base W = Wall WC = Wall Corner WDC = Wall Diagonal Cabinet WEC = Wall End Cabinet WF = Wall Filler WMD = Wall Mullion Door (Door prepped for Glass) WMDC = Wall Mullion Diagonal Cabinet (prepped Glass) WPOF = Wall Pull out Fluted Filler (Spice pull out) WPOP = Wall Pull out Plain Filler (Spice pull out) WR = Wine Rack

    B12 = Base 12 wide

    W3030 = Wall 30 wide, 30 high

  • WALL CABINETS

    Page 4 800-756-8077 www.cabinetexpress.com

    Cubes Saginaw Dartmouth Hudson

    W3012 3 125 145 178

    W331

Recommended

View more >