wkm dm mud valves therm-o-plate dry moly super gate … · dm mud valves replacement parts for...
TRANSCRIPT
® Registered Trademarks of Cooper Cameron Corporation TM Trademark of the Chemola Division of South Coast Products Inc. We are not affiliated with any of the aforementioned trademarks.
Available for all service applications, temperature ratings and valve types.
Plates onto metal surfaces to withstand heat, pressure, wear and corrosive environments.
Inert to water, oil, alkalies and most acids, Dry Moly Lube is an extreme temperature pressure lubricant.
A scientifically formulated penetrant and rust cutter designed for maximum penetration to give faster breakout.
R/RX SERIES
The Oval Cross Section R Series and RX Series are available in low carbon steel and 316 stainless steel.
Used for pressures up to 5,000 PSI.
BX SERIES
The BX Series are available in low carbon steel and 316 stainless steel. Used for pressures up to 20,000 PSI.
RUBBER COATED
Also available are Rubber Coated R-Series & BX-Series Test Gaskets.
WE OFFER THREADED CLASS 200 BRONZE GLOBE VALVES.
The valves have an union bonnet, rising stem, swivel disc holder
and PTFE discs.
Complete line of parts are available for N60 Style Chokes.
2” LP. 3000 - 5000 PSI.
Complete Choke Assemblies and flow beans are available.
Complete line of parts are available for H2 Style Chokes.
2 1/16” - 4 1/16”.5000 - 15,000 PSI.
Complete Choke Assemblies and flow beans are available.
N60CHOKE VALVE PARTS
H2CHOKE VALVE PARTS
#310, 8810 - 15 St | Edmonton, AB | T6P 0B9 | 780.416 .4823 | [email protected]
Parts for API DM Style Mud Gate Valves• 2” - 4”• 2000 - 5000 PSI
DM MUD VALVES
Replacement Parts for Model M WKM® Style API 6A Gate Valves.• 2 1/16” - 4 1/16”• 3000 - 10,000 PSI• Gates, Stems, Seats, Packing Sets, Bonnet Gaskets, Misc. Parts.• Standard Service, Sour Service
WKMGATE VALVES
CIW / F / FC GATE VALVE PARTS CHEMOLA / DESCO SYNTHETIC VALVE LUBRICANTS
WKM / DM GATE VALVE PARTS CHEMOLA / DESCO MAINTENANCE PRODUCTS
CHOKE ASSEMBLIES & PARTS VALVE LUBRICATION F ITT INGS
RING JOINT GASKETS LUBRICATION EQUIPMENT & ACCESSORIES
NEEDLE VALVES BRONZE GLOBE VALVES
• 2 1/16” to 7 1/16”• 2000 PSI to 15,000 PSI
Applications include Lower Pressure Manifold Gate Valves to Higher Pressure Fracing Gate Valves.
We offer a wide variety of quality Needle Valves ranging from 1/4” - 1” NPT. Our Needle Valves are hard seat, have Viton® O-Rings and back up rings and come with a 10M PSI rating, A108 C/S & 316 SS.
“SNIPER”SCREW-PRIME, HAND HELD,
HIGH PRESSURE GREASE GUN
Heavy-duty, industrial grade and precision-made.
Parts and Accessories also available.
HYDRAULICHIGH PRESSURE, HYDRAULIC
GREASE GUN.
Dependable, rugged construction and easy to operate
Parts and Accessories also available
10M STRAIGHTNEEDLE VALVE
10M 90° ANGLENEEDLE VALVE
1/2” NPT 15M STRAIGHT
NEEDLE VALVE
THERM-O-PLATE220
DRY MOLYLUBRICANT
SUPERPENETRANT
- MALE x FEMALE
- FEMALE x FEMALE
- MALE x FEMALE
- FEMALE x FEMALE - MALE x FEMALE
-316 SS
Most fittings available in 1215 mild steel, 316 stainless steel and 4140 RC22 MAX (NACE).
BULK INJECTABLE PACKING
WE HAVE A LARGE SELECTION OF ECONOMICAL THREADED
CARBON STEEL BALL VALVES:
G1041/4” - 2”
One Piece 2000 CWPReduced Port
Seat Pullers and Seat Plates are designed to
remove and install press fit seats from
1 13/16” to 7 1/16” API gate valves.
Snap Off Lockouts are
made of quality aluminum
stock with 1/16” aircraft
cable sequentially
numbered for accurate
document control of the
locked out equipment.
Casing Vent line assemblies are complete with 2” 2000 lb. ball valves, 2” XH heavy nipples and 90° and 180° return elbows.
SPECIAL ORDER UNITS ARE ALSO
AVAILABLE UPON REQUEST.
PRODUCT LINE
PERFORMANCE UNDER PRESSURE SINCE 1986
GRM Flow Products is a premier supplier of high quality parts and service to oilfield supply and service companies worldwide. Operating in Edmonton, Alberta - Canada’s oil capital - GRM has
been providing first-class quality products to oilfield wellhead and valve repair companies since 1986.
We believe in delivering top quality products and service, something that our customers have come to expect from GRM Flow Products.
Supplying the Highest Quality Products
to the Valve Industry
SNAP OFF LOCK OUTS
BALL VALVES
CASING VENT L INE ASSEMBLIES
GATE VALVE SEAT TOOLS
GRMFLOW.COM [email protected]