wireless water monitoring system

WIRELESS Water Monitoring System

Wide Network Provide Prompt Service

Extensive Application Engineering Knowledge

Indigenously developed Products of International Quality

Extensive Project Experience

100% Project Procurement , assure you Guaranteed Savings

Praveen Sharma (Business Consultant - High Energy Segment)

INDEX

• Introduction of Wireless

• Conventional Monitoring

• Why We Need Wireless?

• Architecture of Wireless System:

a) For Flow Measurement.

b) For Tank Level Measurement.

• Application of Wireless System.

a) For Oil & Gas Industries

b) For Process Industries

c) For Utilities & Municipal

• Wireless Best Fit.

• Products Overviews

• Wireless Communication Devices.

• Wireless Modem Functionality.

• Key Features of Wireless System.

• Advantages

Introduction to Wireless

• What is industrial wireless?• Transmitting information via Radios.

• Transmitters

• Receivers

• Gateways

• Monitoring solution• Tank levels monitors

• Motor operated valves

• Pumps

• Water flow Monitoring

• No need for wires or cable

• Radios are programmable• Multiple radios on a reliable path

• To send data upon

• Request

• Periodically

• Pre-determined signal values


Introduction to Wireless

• Conventional Monitoring Conditions

• Long conduit runs between sensors and control room

• Cost of materials for long run conduit or cable.

• Lack of resources to do maintenance


Why We Need Wireless ?

• Why go wireless?

• Cost effective solution

• Avoiding long wire or conduit runs

• Eliminating trenching and cable trays

• Facilitating solutions for applications hindered by physical obstruction

• Added value

• Increased operational safety by continuous monitoring.

• Mobile and flexible monitoring.

• Easy to upgrade as you grow.

• Low cost per access point.

• Easy to install.


Architecture of Wireless System

Data at Individual

Plant

Requirements

• Static IP

• Internet

connection

Cloud /

Internet

M2M with GPRS Modem M2M with GPRS Modem

M2M with GPRS Modem


Water Tank Level Measurement

Remote Tank Level Monitoring

Application:-

• Applications considerations

• Very Important for Energy Conservation.

• Monitoring of Intake Water from Government.

• Monitoring of Level of Reserve Tanks, so that we

can control On/Off of heavy duty motors.

• Monitoring of complete Intake & Consumed Water at

Departmental / Section wise through complete

mapping of flow. So that we can analyses our

requirement & Scope of water conservation

departmental wise.


Applications:-

• Applications considerations

• Control

• Requirements

• Process control

• Automated and manual process control for various

industries

• Alarms

• Monitor conditions and automate alarms when needed


• Application: Oil & Gas

• Well-head and pump monitoring system.

• Pipeline pressure, flow and valve

monitoring.

• Protection system monitoring.

• Leak detection monitoring.

• Underground gas storage monitoring.

• Pump/compressor station control systems.

Application For Oil & Gas Industry


Application for Process Industries

Application: Process IndustriesEg:- Cement plants, Pulp & paper, steel mills,

power gen, glass manufacturing

Flow monitoring.

Tank level monitoring.

Condition monitoring of equipment

Utility plant alarms.

Effluent treatment plants.

Security and access-control of Water.

Remote water pumps.

Mapping of complete Water Flow In/Out even in remote location.

Can Analysis Scope of Water Conservation.


Application for Utilities & Municipal

Application: Utilities & Municipal

Water management

Pump station control

Tank monitoring, level and security

Flow metering systems

Irrigation monitoring and control

Water quality monitoring

Large network SCADA systems

Treatment plant monitoring

Early flood-warning systems


Wireless best fit when…• Manually collected data: Wireless can eliminate the need to send

technicians into the field to read gauges.

• "Must have" measurements: Environmental or safety regulations may require additional measurements. Wireless allows the easy placement of instruments where needed.

• Need for diagnostics: Many plants have hundreds of field devices. Wireless allows access to diagnostic information in certain of these areas.

• Temporary Monitoring: process may only need a short ( 1-3 months ) monitoring. Wireless allows easy, fast, and inexpensive install for these requirements

• “Want to have" measurements: Wireless permits adding instruments in locations that could not previously be justified.

• Long distances involved: Wireless can eliminate the need for long cable runs and trenching to connect tank farms and similar assets spread over a wide area.


Wireless best fit when… • Many pumps and motors: Plants often have hundreds of pumps and

motors. And while continuous condition monitoring is noble in concept, wiring vibration sensors to all of them would be prohibitive. Wireless allows an easy connection.

• Extreme environments: Hot, dangerous and/or hazardous environments make it difficult to install instruments and run wire. Wireless minimizes the problem.

• Crowded environments: Wireless eliminates the need to snake new wires through crowded enclosures and conduit.

• New wiring is too expensive: Installed costs of $50 to $100 per foot can make adding new wired measurement points cost-prohibitive.

• Need for feedback: Manual valves that have no position feedback can cause safety problems. Wirelessly monitoring can cost as little as of a wired solution.

• No other way: Wireless works for mobile assets, remote sites and rotating equipment where using wired instruments is impossible or impractical.


Wireless Communication Devices

• Two-way communication devices

• Transceivers

• Gateways Digital

Analog

Pulse

Digital

Analog

Pulse

Radar

Station

Fuel

Tanks

Standby

Generator

Airport

Management

SCADA


Key Features• Key features of Wireless Solutions:

• Flexible• Vast selection of digital, analog, and pulse inputs per transceiver

• Repeaters are not necessary

• Expandable • Up to 31 serial expansion units

• Each radio is capable of sending / transmitting 20 miles when using an antenna

• Reliable • Redundant paths can be formed

• Routine connection verification

• Frequency hopping spread spectrum

• Secure• Radios use a highly secure data encryption technique


ADVANTAGES:

• Adavantages:-

• Cost savings stem from:

• Reduced repair costs, and machinery downtime/damage (leaks,

corrosion, etc)

• Improved operational efficiency and process control

• Safety costs (avoided injuries)

• Reduced manual/personal monitoring

• Eliminated conduit/cable systems/cable trays installations


Things to take away• Cost-effectiveness - When directly compared to wired installations, wireless is a very

cost effective alternative. Wireless modules allow seamless integration into all applications enabling installation costs to be kept to a minimum.

• Reliability - Radio protocols include multiple addressing levels, error checking, handshaking and automatic re-try mechanisms that guard against transmission failure. Should a communications failure occur, wireless solutions can provide multiple levels of alarm.

• Security - Most technology employed is state-of-art. As a result, each product has four

levels of protection.

• Data is embedded in wireless transmissions using a unique modulation technique.

• The data format has a unique structure with added security features, including network and address validation.

• Data is encrypted using a high-security encryption algorithm.

• Wireless protocol operates on an exception-reporting basis, transmitting when there is a change. This greatly increases the difficulty in collecting wireless samples for decoding.

• Ease of installation - Our modules have built-in diagnostics and remote configuration

abilities that are designed to save time and hassles. Our free 24 hour technical support provides further assistance should you require it.


THANK YOU !

• .


wireless water monitoring system

Documents

wireless solutions

industrial wireless

application of wireless

wireless modem functionality

continuous monitoring

flexible monitoring

conduit runseliminating

cable radios